Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Part Numbers

Transcription

1 Standard Series Key features: Wide power range: 7.W-4W Universal input : 7.W-W: 8-264V /1-37V DC W: 8-2V /17-264V 24-37V DC (selectable) W, W, 24W: 8-264V /11-3V DC 4W: 3 phase: 32- V 3 phase: 3- V Overcurrent/overvoltage protection Power Factor Correction (W, W, 24W models) EN6-3-3 EN6-3-2 adjustment +1% Spring-up crew terminal, IP2 (finger-safe) DIN rail or panel surface mount Approvals: CE marked UL 8 Listed c-ul TÜV approved LVD EN9:2 EMC Directives: EN81-2 EN82-2 EN6-6-2 Standard Series Switching Part Numbers UL 8 Listed File #E Cert No. BL V DC 1.A -A V DC.6A -A 24V DC.3A -A24 Style Capacity 8 to 264V Rated Current Part Number 24V DC 3.1A -Q24 V DC 2.A -B 1 V DC 1.2A -B 8 to 264V 24V DC.6A -B24 24V DC 4.2A -E24 V DC 2.A -C 3 24V DC 1.3A -C24 to 24V 24V DC A -F24 24V DC 2.1A -D V DC 1A -G to V (3 phase) 3 to V (2 phase) 24V DC 2A -TJ24*

2 Standard Series Specifications -A -B* Model -A -B -C -A24 -B24 -C24 -D24 -Q24 -E24 -F24 -G24 -TJ24 Capacity 7.W 1W 3W W W W W 24W 4W (singlephase, 2-wire) to 24V nominal (8 to 264V ), /Hz (47 to 63Hz) 11 to 34V DC nominal (1 to 37V DC) to V, /Hz 2 to 24V, /Hz (jumper selectable) 24 to 37V DC 2.A at V 1.A at 2V to 24V, /Hz, 11 to 34V DC.17A at.3a at.68a at V 1.1A at 1.1A at 1.8A at Current (typical) 4A at V V V V V V Internal Fuse Rating 2A 2A 3.1A 3.1A 3.1A 4A 4A 6.3A 7A maximum A maximum (at 7A maximum (at cold start at Inrush Current A maximum (at cold start at 2V ) (at cold start at cold start at 2V 23V ) 23V ) ) Leakage Current (at no load) Typical Efficiency Overvoltage Protection and Current Ratings V, 1.A V,.6A 24V,.3A 69% at V % at V 79% at 24V V, 2.A V, 1.2A 24V,.6A.mA maximum (Hz, measured in conformance with UL, CSA, VDE) % at V % at 24V V, 2.A 24V, 1.3A 3 phase: 32 to V 2 phase: 3 to V 3 x 1.1A 3 x.8a 79% at 24V 83% at 24V 8% at 24V 83% at 24V 91% s turns off at 1% (typical) 21A na <3.ml 24V, 2.1A 24V, 3.1A 24V, 4.2A 24V, A 24V, 1A 24V, 2A Adjustments ±1% ( screw on top) Holding Time 2ms minimum (at full rated input and output) 1ms typical Rise Time 2ms maximum (at full rated input and output) 1ms max.? Line Regulation.4% maximum 1.% max Load Regulation 1.% maximum 2.% max Fluctuation due to Ambient Temperature Change.% maximum Ripple 2% peak to peak maximum (including noise) < 1mVpp Overload Protection % typical (Zener-limiting) % typical, auto reset % typical, auto reset Operation Indicator LED (green) Parallel Operation -A -B -C -D -Q -E -F -G Allowed No Yes No Yes Yes Between input and output terminals: 3,V, 1 minute Dielectric Strength Between input terminals and housing: 2,V, 1 minute Between output terminal and housing: V, 1 minute Insulation Resistance Between input and output terminals/input terminals and housing: MΩ minimum (V DC megger) 2kV, V DG Operating Temperature 1 to + C (14 to 14 F) (see derating curves) -2 to +7 C Storage Temperature 3 to +8 C (-22 to 18 F) -4 to +8 C Operating Humidity 2 to % relative humidity (no condensation) 9% max (at 2 C, no condensation) <1Hz amplitude +/- 2.mm in Vibration Resistance 4m/s 2, 1 to Hz, 2 hours on each of 3 axes 1 to Hz,.mm p-p, 2 hrs on each of 3 axes accordance with IEC to 1Hz, 2.3g, min. 3g in all Shock Resistance 3m/s 2 (3G), 3 shocks in each of 6 directions directions in accordance with IEC Approvals Conforms to EMC Directives EN81-2 & EN82-2. LVD Directive EN29 Certified to EN9. UL8 listed. c-ul, TUV approved. CE marked. EN6-3-2 Weight 1g 17g 3g 3g g g g 2g 2g Termination Spring-up, fingersafe terminals with captive M3. screws IP protection IP2 (finger safe) Dimensions H x W x D (mm) x 4 x 7 x 4 x9 x x 9 x x 9 x 8 x 14 x 14 x 9 x 11 x14 x 2x 14 x 11 x 12. Dimensions H x W x D (inches) 2.9 x 1.77 x x 3.4 x 2.9 x x 3.3 x 4.72 x 4.3 x 4.72 x 7.87 x 2.9 x 1.77 x x.71 x x x 4.3 x For dimensions, see page For usage instructions, see page *.W for VDC model IDEC (4332) USA & Canada 189

3 Standard Series Temperature Derating Curves -A/B -C/D E Operating Temperature ( C) -Q Mouting style A -F/G Mounting Style B Mounting Style A -TJ Current (A) 7 I w Ambient Temperature (C) A Mounting (standard) B Mounting (Facing Upward) Vertical Vertical

4 Standard Series Part Numbers: Accessories Accessories Appearance Description Part Number DIN rail (mm) DIN rail end clip BNDN BNL Installation Instructions Time-Saving Spring-up Terminals The innovative terminals on the series use a spring-loaded screw. This makes installation as easy as pushing down and turning with a screwdriver. Installation time is cut in half since the screws do not need to be backed out to install wiring. The screws are held captive once installed and are % finger-safe. Screw terminals accept bare wire or ring or fork connectors. 1. Insert the wire connector into the slot on the side of the power supply. 2. Using a flat head or Phillips screwdriver, push down and turn the screw. The wire is now connected, and the screw terminal is fingersafe! Front Panel (terminals) V. ADJ +V, V L, N adjustment Operation indicator DC output terminals Frame ground terminals No connection Adjusts within ±1%; turn clockwise to increase output voltage Green LED is lit when output voltage is on +V: Positive output Terminal V: Negative output terminal Ground this terminal to reduce high-frequency currents caused by switching Accept a wide range of voltages and frequencies (no polarity at DC input) Do not insert wires here, as this may damage the power supply + - Overcurrent Protection Characteristics (%) (%) -A/B -C/D/E 1 1 Parallel Operation TERMINALS ELECTRICAL LOAD 1. Parallel operation only recommended for -Q24, -F24 and -G Factory recommended diode ST Microelectronics BYV4V-, BYV4V-, BYV4V-2, BYV41V-2 or with equivalent electrical specifications. 3. Using the voltage adjustment make sure out-voltage is the same for all power supplies IDEC (4332) USA & Canada 191

5 Standard Series Dimensions -A (7.W) -B (1W) -C (3W) 1-ø R2.2 6-ø R2.2 6-ø D (W) -Q (W) -F (W) 1-ø E (W) -G (24W) TJ ø V 1 2 Terminal Markings -A/B -C/D/Q/F/G -E -V +V V +V V +V w-output L N L N VOLTAGE SELECT L N 2-24V -V 2-24V