19" Cases Floor Standing Cabinets Cabinet Accessories Sub-Racks Cabinet Thermal Management

Transcription

1 Page 19" Cases Floor Standing Cabinets Cabinet Accessories Sub-Racks Cabinet Thermal Management Page 19" Rack Mount ABS Ì Flammability rating UL 94-V0 19" Cases External Dimensions H (U) H (mm)w (mm)d (mm)list No. Order Code Light Grey G17081UG G17082UG G17083UG Black G17081UBK G17082UBK G17083UBK " Rack Mount Case Ì Can be used for rack mounting of stand alone Ì Moulded from high impact ABS Ì Available in grey or black Ì Supplied in standard 1U, 2U or 3U height versions Ì Ideal for electronic and telecommunications equipment Ì Can be installed into 19" racks Ì Easily assembled with optimum accessibility Ì Supplied with front and rear internal supports for the mounting of trays or circuits (2 and 3U only) Ì Standard unit includes: Front panel, box, rear and upper lid Ì Frame manufactured from 1mm steel Ì Front panels manufactured from 3mm aluminium Ì Additionall black and silver panels and handles also available Order Code Cases Height Depth Colour 1U 263 Silver U 363 Silver U 263 Silver U 363 Silver U 263 Silver U 363 Silver U 263 Black U 263 Black U 263 Black U 363 Black U 263 Black U 363 Black Front Panels 1U Silver U Silver U Silver U Black U Black U Black Handles 1U Black U Black U Black " Rack Case Sheet Steel Ì Complete chassis with aluminium extrusion front panel Ì Detachable rear panel Ì 19" and ATX power supplies can be assembled in the 1U versions up to a clearance of 40mm Each chassis is delivered with: Front panel, Base, Rear Panel, Cover and Assembly kit H D (mm) 1U U U U U " Table Top Cabinets Ì Welded, 16 gauge steel 19" table top rack Ì Front and rear recessed flange Ì Recommended maximum weight 272kg Ì Includes rubber feet, two lifting handles and clip nuts Ì Tough powder finish paint Ì Available in 13" and 17" depths in both grey and black / Order Height List No. Code " Black 2U RCBS BK U RCBS BK U RCBS BK " Black 4U RCBS BK U RCBS BK Comptec Desk-Top Case Ì Case, 84HP, integrated 19" for subracks or other 19" applications with high stability and removeable top cover Ì Assembling of 19" applications is possible at front or rear side because of symmetrical case design Ì 6/9U cases with handle shell for heavy load application. Handle shells can be replaced by folding handles (max load 50kg) Ì No handles for 3/4U cases Ì Tip-up feet, maximum load 50kg, anthracite RAL7016, instead of standard feet applicable Delivery Comprises (Kit) Pos Description Case U 3/4 6/9 1 Front frame with integrated 19" mounting Rear frame with integrated 19" mounting Side extrusion Side extrusion at bottom Side panel with GND/Earthing connection Handle shell

2 Comptec Desk-Top Case - continued Comptec Slide Rails - continued 19" Cases - continued (19") with Glazed Door - EL Range IP55 7 Cover with GND/Earthing connection Base with GND/Earthing connection Rear panel with GND/Earthing connection Foot with anti-slip protection Assembly kit 1 1 Case Comptec Slide Rails Height Depth U mm List No. Order Code Earthing kit for 3U or 4U cases Earthing Kit for 6U or 9U case Pair folding handles for 6U or 9U case with assembly kit pair tip-up feet Ì Slide rail, anodised aluminium profile, cut edges plain, load-carrying capacity 10kg Ì Note: 1 piece per order code, please order 2 pieces Depth mm List No. Order Code Ì 3 part construction - base, component housing, glazed door. Ì IP55 sealed. Ì Supplied with mounting plate and adjustable mm (19") mounting bracket. Ì Equipment access via front or rear, both lockable as required. Ì Fabricated and welded 1.5mm with steel construction. Ì 3mm thick safety glass viewing door Ì Removable gland plates at both top and bottom of rear wall mounting section. Ì Colour: Light Grey RAL 7035 (main body) RAL 7033 (front door extruded aluminium frame). U Height Width Depth List No. Order Code EL EL EL EL Order Code mm Deep Enclosures 3U U mm Deep Enclosures 6U H 15U H H Heavy item special delivery condtions apply Accessories - EL Range Comptec Front Panels Ì Anodised aluminium Ì Front panel also useable as rear panel Front Panel List No. Order Code Front Panel List No. Order Code 84HP, 3U HP, 6U HP, 4U HP, 9U List No. Order Code Case Comptec Slide Rails Comptec Front Panels Wall Bracket Wall brackets - For secure wall mounting. Available in two sizes to give a distance from the wall of 10mm. 19" Wall Mounted Enclosures Pack Wall Brackets List No. Qty Order Code mm Ì Multifunctional 19" wall case with hinged sidepanels Ì Cable entry possible from above or below; the cable ducting opening can be sealed with two brush strips each, resp. can be used to assemble fan Ì Cable support rail is included and is adjustable in mm increments Ì 19" panel/slide mounts are depth-adjustable in mm increments Ì Protection: IP 20 Kit Contents: Basic case, glazed door with key/lock and door handle cut-out, side pannel, cable support rail, 19" slide mounts, brush strip and wall mounting kit Dimensions (mm) List No. H W D Order Code Accessories Equipment Shelf - 447mm x 238mm Equipment Shelf - 430mm x 0mm Equipment Shelf - 430mm x 300mm

3 Dimensions (mm) List No. H W D Order Code Accessories Fixing Kit (Pk8) Lever Handle Cylinder Lock Gang Schuko Extension Lead Gang Schuko Extension Lead " Wall Mounted Enclosures Ì Multifunctional 10" wall case with hinged side panels Ì Cable entry possible from above or below, the cable entry opening can be sealed with a brush strip Ì 10" slide mounts are depth-adjustable in mm increments Kit Contents: Basic case, glazed door with key lock, side pannel, 10" panel/slide mounts, brush strip and wall mounting kit. 19" Wall Mounted Cabinet Easyrack SOHO Ì Delivered flat packed for ease of access to all installations Ì Fast and efficient assembly without tools Ì 2x 19" mounting profiles Ì Fast fixings 1/4 turn locks Ì New front door with aluminium frame, tempered and smoked safety glass Ì No rear panel or door Ì Newly designed top and base panels, with ventilated areas for installation of the new modular fan trays Ì New cable entry options for the top panels with plastic blanking covers or optional brush strip fittings Ì Template included for wall mounting Ì Load capacity: 40 Kg Height Dimensions (mm) List No. U H W D Order Code Dimensions (mm) List No. H W D Order Code Accessories Cable Support - 220mm x 150mm " Front Panel Fixing Kit (Pk8) Lever Handle Gang Schuko Extension Lead Gang Schuko Extension Lead Flatpacked 19" Wall Cabinets Easyrack Ì Delivered flat packed for ease of access to all installations Ì Reduces logistic costs & offers greater protection during transit Ì Fast & efficient assembly without tools Ì 2 x 19" mounting profiles (variable depth, in 20mm increments) Ì Fast fixings 1/4 turn locks Ì Aluminium frame door with tempered, smoked safety glass Ì Easily removable side panels with 2 x 1/4 turn locks Ì Top & base panels with ventilated areas Ì New cable entry options for the top panels Ì Plastic blanking covers / optional brush strip fittings Ì Template for wall mounting included Ì Distributed recommended load capacity: 40kg Dimensions (mm) List No. H W D U/HE Order Code Rear Cover Profiles - Pack of " Enclosures EUROPAC A range of sturdy but lightweight 19" enclosures designed to accept full-width 84E subracks and standard plug-in units. Ì Heights from 2U up to 9U Ì Constructed entirely in 1 mm thick steel Ì Supplied with ABS plastic feet, tilt-feet in front, fixed feet in rear Ì Ventilation slots in base and rear panel Ì Side panels have recessed handles in ABS, ergonomically disposed for comfort and ease transport Basic unit includes: Top and bases covers, two side panels, one rear panel, four feet (two tiltup feet in frontal part), brackets, handles and mounting hardware. Height Dimensions (mm) List No. U H W D Order Code Chassis Rear Panel

4 Ratiopac PRO, Unshielded 3U Table Top and 19" Case 19" Cases - continued Ì Cases supplied partially assembled Ì Unit is suitable as a table top or for the assembly into a 19" cabinet Ì Dependant on the application the front trims can be exchanged for handles or 19" mounting brackets Ì Corresponds to the latest standards of IEC and IEEE /11 Ì CompactPCI and VME64x systems can be assembled with the case Ì Trim can be removed easily for maintenance and testing purposes without special tools Ì The chromated surfaces and a special press-on technique offer a high shielding (of àdb for 1 GHz) Ì The front panel is optimally adjusted to the width of the case. It is assembled without screws Ì Air filter assembly available separatley Material/Colour/Finish Ì Horizontal rails -aluminium extrusions, visible surfaces powder coated RAL 7016 (anthracite). Ì Side panels - aluminium, clear Ì Trim - aluminium, visible surfaces powder coated RAL 9006 (white aluminium) Ì Trim, Zn die-cast, RAL 7016 (anthracite) Ì Front handle and 19" mounting brackets, aluminium die-cast, powder coated RAL 7016 (anthracite) Standards Ì Protection IP20 to IEC/EN Ì Inner and outer dimensions to IEC Ì Protection of earthing connections to, DIN EN 50178/ VDE 0160, DIN EN / VDE 0805, DIN EN Teil 1 / VDE 0411 Part 1 Item Description Qty. Item Description Qty. Item Description Qty. Horizontal Rail 6 Trim/ Corner Piece 4 Side Panel 2 Side Panel 2 Cover /Base Plate 2 Rear Panel Front Panel Height Width U HP U Case Width Depth HP mm Front Panels, Unshielded Note: For mounting onto the subrack sleeves, Item 3, Order Code and collar screws, Item 2, Order Code are required. Please order separately. Ì 2.5mm front anodised aluminium H W Price Per Pack U HP Pack Qty Mounting Accessories Sleeves x Collar Screw x Plug-In Unit, Unshielded H (U) W (HP) Ratiopac PRO, Shielded Table Top and 19" Case Width Depth HP mm Height = 3HU Front Panels, Shielded H W Price Per Pack U HP Pack Qty Order-No. Order Code Mounting Accessories Sleeves x Collar Screw x Plug-In Units, Shielded Ì 2.5mm aluminium front anodised, conductive plug-in unit Ì Includes extractor handle and assembly kit Ì Product features, materials and standards as ratiopac PRO, unshielded Ì In addition the unit comprises HFshielding material and perforated strips for the centering of shielded plug-in units Ì For shielded assemblies please use shielded part front panels or plug-in units Includes: 1 Front panel shielded 1 EMC gasketing 2 Location dowel (press-in) Ì 2.5mm front anodised aluminium Ì 2.5mm front anodised aluminium Ì Includes extractor handle and assembly kit Ì Extractor handle: Plastic, grey Ì Board retainers: Zn-die cast Note: For mounting onto the subrack sleeves, Item 3, Order Code and collar screws, Item 2, Order Code are required. Please order separately Hinged Front Panels, Unshielded Ì 2.5mm aluminium front anodised Ì Panel includes assembly kit H W U HP H (U) W (HP)

5 Ratiopac PRO, air unshielded Table Top and 19" Case Ì 4U Case for the insertion of 3U boards with additional space for ventilation Ì Air intake through perforation on the underside of the case (see diagram), air outlet at the rear top Ì Product features, content, materials and standards as ratiopac PRO Width Depth HP mm Ì If connectors (IEC / DIN 41612) are to be installed, additional perforated rails have to be fixed to the rear horizontal rail Ì Guide rails for board thickness 1.6mm (nut width 2mm). Assemble by pressing the guide rails onto the horizontal rails Ì Material PBT UL94V-0 Ì Colour: red Depth Width Price Per Pack mm HP 4 Perforated Rails Fixing Screws for Perforated Rails (100 Pcs) Guide Rails Ratiopac PRO, Air Accessories Handles and 19" Mounting Brackets Ì Coloured decorative strips to create an individual appearance. They can be glued to the corner piece or the handle Ì Cannot be used with 19" mounting brackets Height U Type 3 PRO Handle, 2pcs PRO Bracket, 19" PRO air Handle, 2pcs PRO air Bracket, 19" " Racks and Accessories Floor Standing Cabinets Ì 19" modular cabinets for networks, telecommunications and industrial electronic installations Ì Designed in accordance with IEC , DIN parts 1 and 7, ANSI/EIA-310-D and UNE Rack: Ì Supplied flat packed {5min assembly time} Ì Aluminium external structure Ì 4 x 19" steel internal sections, depth adjustable Ì 4 x 19" network bracket sections Ì Safety glass front door with lock and Springswivel hinge system Ì Rear panel with cable output Ì 1 4 turn locking ventilated top panel Ì 8 corner pieces in injection moulded ABS Ì Adjustable levelling feet Ì Distributed load capacity, 500kg (static) 300kg (dynamic) Ì Finished in grey graphite epoxy paint Racks Order Code 12U U U U U Racks Order Code Accessories Bottom rack cover Fixed tray Cantilever shelf, 400mm, 2U Cantilever shelf, 280mm, 2U Telescopic Tray, 600mm Rack guides Modular Fan tray, 2 fans Modular Fan tray, 2 fans + Thermostat Blank panel 1U Blank panel 2U Blank panel 3U Blank panel, vented, 1U Blank panel, vented, 2U Blank panel, vented, 3U Castors x " Modular Cabinets LOGIC 2 Ì Aluminium profile external structure with diecast high resistance corners Ì 4 x 19" sections adjustable in depths (gaps of 20mm) Ì Manufactured in steel Ì Front door in safety glass, aluminium frame Ì Springswivel hinge and Handly-lock Ì Opening angle 190 Ì Removable side panels with 1 4 turn locks Ì Steel rear door with lock Ì Springswivel hinge and pre-punched cable output Ì 1 4 turn locking ventilated top panels with cable entries Ì 8 corners lid in injected-moulded ABS Ì 4 adjustable levelling feet Ì Load capacity: 1000 Kg (static) / 300 Kg (dynamic) Height Dimensions (mm) List No. U H W D Order Code Bottom Cover Plinth " Accessories - LOGIC 2 Guides Ì Made of 2mm steel Ì Height adjustable with standard position indicator Ì Finish: zinc plated coating Ì Contents: 1 pair of guides and assembly hardware Depth Price Per Pack List No. (mm) Order Code Unscrewed Guides Ì Made of 2mm steel Ì Quick attachment to the rack, without bolts Ì Finish: zinc plated coating Ì Contents: 1 pair of guides and 4 stoppers Depth Price Per Pack List No. (mm) Order Code Baying Kit

6 Floor Standing Cabinets - continued Multi-function Supports - continued Wheel-feet Kit - continued Ì Fast, effective side-assembly system for attaching two or more racks Ì Contents: 8 threaded screws and 4 intermediate sleeves Price Per Set Corners Ì Enable the customisation, adaptation to corporate image, identification and separation of functions of each/group of racks Ì Contents: 1 set for 1 rack Copper Grounding Bar Ì Allows the different ground wires to be centralised into a single point for further single grounding connection Ì Contents: 1 x 42U/1.700 mm copper bar, 20 terminals and 4 insulators Multidirectional Wheels Wheel-feet Kit Price Per Set Wheel Supports For Plinth Price Per Set Carry Rings Price Per Set Fix Tray Ì Manufactured in 1.5mm steel Ì Easy assembly, attached to the rack at four anchoring points with M6 bolts Ì Attachment points adaptable to variations in the depth of the 19" sections Ì Recommended maximum static load: 60 Kg Ì Standard ventilation slots Ì Finished in grey graphite epoxy paint Ì Contents: one tray with mounting hardware Dimensions (mm) List No. H W D Order Code Ì Set of 4 double rotating wheels with rubber rolling band Ì Bracket made of stamped steel, with double roll of balls Ì Maximum dynamic load acceptable per set: 2400N / 240Kg Ì Contents: 4 wheels (2 with brakes) and assembly hardware Ì Allows for moving the rack and its final positioning over standard feet Ì Made of 2mm steel Ì Finished in epoxy graphite grey Ì Contents: 4 supports, 4 wheels and mounting hardware Ì Allows for setting wheels in a standard plinth or stabilizer plinth Ì For LOGIC 2 and EVO racks Ì Made of 2mm stee Ì Finished in graphite grey epoxy paint Ì Contents: 4 supports and mounting hardware Ì Forged iron lifting ring Ì Attached with M10 bolt Ì Load capacity per set: 800 Kg Ì Contents: 4 rings with attachment hardware Price Per Set List No. Colour Order Code Black Blue Orange Green Red Yellow Vertical Wiring Distributor Ì Ideal for the vertical distribution of wiring in the rack Ì Built-in clamps and integrated outlets for high density of wiring Ì Possibility to assembly extra clamps at the back side Ì Manufactured in 2mm steel Ì Finished in grey graphite epoxy paint Ì Contents: 1 pair of vertical distributors and assembly hardware Height Height Price Per Pack List No. U (mm) Order Code Vertical Distributor Cover Ì Designed for an optimal cable organization Ì Side cable entries at each U s Ì Cover with fast assembly 2x 1 4 turn bolts Ì Manufactured in 1.5mm steel Ì Finished in grey graphite epoxy paint Ì Contents: 1 pair of vertical distributors, 1 pair of covers and assembly hardware Height Price Per Pack List No. (mm) Order Code Multi-function Supports Width Depth List No. (mm) (mm) Order Code Ì Attached to the lateral structure of rack, they can be used as a cable guide and provide additional anchoring points to the 19" sections Ì Quick 1 4 turn bolt mounting in LOGIC 2 Ì Made of 1mm steel Ì Finished in graphite grey epoxy paint Ì Contents: 1 pair and hardware mounting. Cable Entry Cover Ì Close the cable top panels cable or bottom cover entries when not required Ì Made in injected PE Ì Colour: black

7 Dimensions (mm) List No. H W D Order Code " Accessories Front Guides Ì Attached to rack by two anchoring points with M6 bolts Ì Made of 2mm steel Ì Finished in zinc plated coating Ì Contents: 1 pair of guide and assembly hardware Cable-guide Clamps Ì Manufactured in steel Ì Includes assembly hardware Ì Finished in black epoxy paint Ì Contents: 12 clamps and assembly hardware 1U ABS "Clip-On" Panel Price Per Pack Price Per Pack U s Numbered Strip Price Per Pack Cantilever Trays Height Width Depth List No. U (mm) (mm) Order Code Cantilever Telescopic Tray Width Depth List No. (mm) (mm) Order Code Ì Numbered strips (1-24 and -47U) in semi-rigid polycarbonate Ì Allows a faster and easier of the 19" equipments assembly Ì Contents: 2 pairs of adhesive strips (2x 1-24U and 2x -47U) Ì Manufactured in 1.5mm steel Ì 19" assembly with four anchoring points on the front sections Ì Recommended maximum static load: 10/20 Kg Ì Standard ventilation slots Ì Finished in grey graphite epoxy paint Ì Contents: 1 tray (screws not included) Ì Ideal for holding keyboards Ì Manufactured in 1.5mm steel Ì 19" assembly with four anchoring points on the front sections Ì Recommended maximum static load: 10 Kg Ì Standard ventilation slots Ì Polyamide handle Ì Front fastening height: 2U Ì Standard depth: 280 mm Ì Tray finished in grey graphite epoxy Ì Telescopic guide rails zinc plated Ì Contents: 1 tray, 1 pair telescopic guides,1 front handle Copper Grounding Bar Ì Allows the different ground wires to be centralised into a single point for further single grounding connection Ì Contents: 1 x 200 mm copper bar, 4 connection terminals, 2 insulators Ì The simplest cost-effective item which improves the cooling efficiency in the rack. Avoids the recirculation of warm air from the rear to the front Ì Fast "Clip ON" assembly, no hardware mounting is required Ì Finished in black ABS Ì Contents: 5 panels Height Dimensions (mm) Price Per Pack List No. U H W D Order Code " Clamps Panel With Cover Ì 19" panel for guiding and distributing wires Ì The quick-locking front panel hides wires in the front of the rack Ì Manufactured in 1.5mm steel Ì Quick-anchoring cover panel Ì Finished in black epoxy paint Ì Contents: 1 panel, 1 cover, cover attachment hardware subracks Sub-Racks " Clamps Panels Height Price Per Pack List No. U Order Code " 3U Subracks Price Per Pack List No. Type Order Code Opened Closed Ì 19" panel for guiding and distributing wires Ì Manufactured in 1.5mm steel Ì Finished in black epoxy paint Ì Contents: 1 panel, assembly hardware 19" Panel With Brushes Ì 19 panel Ì 1U high Ì Open or closed variant Ì Manufactured in 1.5mm steel Ì Finished in black epoxy paint Ì Contents: 1 panel with brushes. Ì integration of Europe cards according EN Ì 19" fixing part: angled side panel Ì delivery content basic unit: 2 side panels, 2 front module rails, 2 rear module rails, mounting material Ì IZ versions with integrated Z-rail Order Code List No 3U height (mm) depth (mm) BGT BGT BGT IZ BGT IZ

8 19" 3U Subracks - continued Profile GB29LME Cover panel AB211 Height = 3U, Width = 84HP Height = 6U, Width = 84HP Sub-Racks - continued List No Order Code BGT BGT Versions with Z-Rail BGT IZ BGT IZ Threaded rails M2.5 BGT Profiles for 19" subracks, insulation and panel accessories " Subracks europac PRO, Unshielded 3U, 84HP Subrack includes: 4 Horizontal rail (Item 1) 2 Side panels (Item 2) 2 19" mounting flanges (Item 3) Insulation strip IST84 Ì GB29LME: front module rail (perforated, clear anodised) Ì GB05LME: Z-rails, perforated, for connector DIN (clear anodised) Ì IST84 insulation strip for rear module rail or isolation of BUS backplanes ( with this strip the standard insert depth or plug-in-modules is established) Ì AB211: perforated cover panel for 160mm PCB depth Ì Threaded Rails BGT 384 2: with M2.5 threads for mounting of fixing rails and front panels (1 set contains 4 threaded rails) Description List No Order Code PROFILES FOR 19" SUBRACKS GB29LME PROFILES FOR 19" SUBRACKS GB05LME INSULATION STRIP IST PERFORATED COVER PANEL AB THREADED RAILS M 2.5 (1set ofbgt rails) Features Ì Aluminium built, very robust Ì Horizontal extrusions (rails) are optimised for best possible flow of air and heat dissipation Ì IEC / DIN Ì Earthing to IEC / EN Threaded inserts (Item 4) 2 Insulating strips (Item 5) 1 Assembly Kit Depth 19" Subracks europac PRO, Unshielded Lightweight Version Kit includes: 2 19" support bracket (Item 1) 2 Side panel type F (Item 2) 2 Front horizontal rail (L-SL) (Item 3) 19" Subracks, europac PRO, Shielded Ì Earthing to IEC / EN Ì Shielding to VG 95373, T15 Ì Mechanical stress to IEC Includes: 6 Horizontal rails (Item 1) 2 Side panels (Item 2) 2 19" mounting flanges (Item3) Assembly Kit For 19" Subracks Depth Height = 3U, Width = 84HP Height = 6U, Width = 84HP HF-Frame Type Plug-In Units 6 Threaded inserts (Item 4) 2 Insulating strips (Item 5) 2 Cover plate (Item 7) Features Ì Typical shielding of 40 1GHz, providing the front is enclosed with shielded front panels Ì Increased stability through strengthened horizontal rails, shock and virabration proof to IEC Ì IEC / DIN Includes: 8 Screw M Plastic washer, black 8 Cage nut KM 6 Ì Converts subrack into 19" case or cabinet Price Per Kit Includes: 1 Front panel 1 Handle 1 Tubus 1 Rear panel 2 Perforated covers 2 EMC-contact strips Ì Rear horizontal rail for connector assembly Ì IEC /DIN Ì Fully IEEE compatible 2 Rear horizontal rail (L-WZ) (Item 3a) 2 Threaded insert, pre-mount (Item 4) 1 Assembly Kit (Item 5) Depth (mm) Height = 3U, Width = 84HP Height = 6U, Width = 84HP Backplane Mounting 1 Rear panel (Item 8) 1 EMC gasketing 1 Assembly kit Features Ì Suitable for all subracks and cases Ì For boards in Euro-board format Ì 3U: mm or mm Ì Extrusion with grooves for the insertion of boards into a standardised HP-grid. This way guide rails are not required Standards Ì IEC / DIN PCB mounting bracket 1 Assembly kit

9 Width HP 3U, Depth 167mm U, Depth 227mm Plug-In Units For Board Insertion Kits - With Handle (Unshielded) 3 U Width HP Unshielded - Height 3U Unshielded - Height 6U Guide Rails Ì Guide rails for board depth 160 or 220mm. Ì Assemble by pressing into the horizontal rail Ì Slot width 2mm, for board thickness 1.6mm Material: PBT UL94V-0 Colour: Red Per Pack Depth Standard Standard, DIN Connector Mounting Cover Plate Kit supplied with handle(s), identification plate, printed circuit brackets and all necessary hardware mounting accessories. Ì Provides mechanical protection for boards Material: Aluminium 1.2mm, anodised Perforation: Ø3.8mm for 60% air flow Per Pack Price Per Pack Depth Perforated Rails For Connectors Ì 4 Perforated rails plus assembly kit Price Per Pack HP " - AC/DC switched-mode regulator Single 50 W ecopower Characteristics: Ì 19" - AC/DC switched-mode regulator with one output voltage Ì Wide mains input voltage range (wide range V AC and V DC) Ì Ambient temperature during operation 0 to 70 CC Ì Front panel with matching holes, anodized, rear face chromium-plated, slotted on both sides for holding EMC contact strips International licences: Ì EN Ì Interference emission in accordance with EN , interference immunity in accordance with EN Ì CE, UL1950 No. E Note: Ì Please order front panel separately ( ) Ì Please order EMC contact strips for increased EMC requirements separately ( ) Dimensions T= 0-50 C List No. H (HU) W (HP) Voltage (V) Current (A) Power (W) SEK SEK SEK List No. Order Code Single 50W SEK SEK SEK Frontpanel EMC strips " - AC/DC switched-mode regulator Single 100 W maxpower Price Per Pack (10pcs.) Characteristics: Ì With fixed output voltage. Wide adjustment range. Ambient temperature during operation 0 to 70 CC Ì Front panel with matching holes, anodized, rear face chromium-plated, both faces slotted for holding EMC contact strips International licence: Ì EN Ì Interference immunity in accordance with EN Ì CE, UL Note: Ì Please order front panel separately ( or ) Ì Please order EMC contact strips for enhanced EMC requirements separately ( ) Technical data, single 100 W with fixed output voltage Dimensions T= 0-50 C List No. H (HU) W (HP) Voltage (V) Current (A) Power (W) MAX MAX

10 2374 Sub-Racks - continued 19" - AC/DC switched-mode regulator - continued Single 100 W maxpower - continued List No. Order Code Single 100W fixed MAX MAX Frontpanel EMC strips " - AC/DC switched-mode regulator Triple 100 W maxpower Technical data Triple 100 W Price Per Pack (10pcs.) Dimensions T= 0-50 C List No. H (HU) W (HP) U1 (V) U2 (V) U3 (V) I1 (A) I2 (A) I3 (A) MAX MAX List No. Order Code Triple 100W MAX MAX Frontpanel## Price Per Pack (10pcs.) EMC strips " Plug-In Mulitpac PRO Ì complete chassis from Aluminium Ì detachable rear panel for easy machining Ì in accordance with IEC , -101, -105 NEW : Delivery now as a kit: 1 x Front panel (AI-extrusion, clear chromated) 1 x Rear panel (AI-sheet, clear chromated) 1 x base plate (Al, plain or perforated) Please order handles and HF gasketing separately Characteristics: Ì 19" AC/DC switched-mode regulator with 3 output voltages Ì Ambient temperature during operation 0 to 70 CC Ì Front panel with matching holes, anodized, rear face chromium-plated, slotted on both sides for holding EMC contact strips International licences: Ì EN Ì Interference immunity in accordance with EN Ì CE, UL Note: Ì Please order front panel separately ( ) Ì Please order EMC contact strips for increased EMC requirements separately ( ) Ì EMC shielding of approx 30 db(a) at 1GHz (without additional shielding material) 1 x cover plate, plain 2 x Side panels (AI-extrusion, natural) 1 x Assembly kit Height Height Depth Type (plain U mm mm or perforated) List No. Order Code plain perfor plain perfor plain plain perfor plain perfor plain perfor plain perfor plain perfor Height Height Depth Type (plain U mm mm or perforated) List No. Order Code plain perfor plain perfor plain perfor plain perfor plain perfor Handles Ì Packaging unit: 2 handles (AI-extrusion) and assembly kit Height Height U List No. Order Code U List No. Order Code HF Gasketing Kit Ì The basic assembly, with covers and HF-gasketing kit provides a shielded version of the multipac plug-in unit Ì HF measurements to VG-Norm List No. Order Code Chassis Kit complete Handles HF-Gasketing Kit Telescopic Rail Kit Ripac Eco Subrack System Ì IEC Ì IEEE , and Ì Steel sides, Aluminium rails and flanges with conductive finish Ì Slim rails and guides for better cooling Ì Optional covers Ripac Eco, 48HP subrack for 482.6mm (19") mounting Ì Kit includes sides, flanges, front/rear rails, threaded inserts, assembly screws Ì Order insulating strip (backplanes), Z rails (Din connectors) and guide rails seperately Ì Accessories from Ripac range are used with Ripac Vario-Module Instrument cases Dimensions H x D 3U x160mm U x220mm U x220mm

11 Ripac Accessories For Ripac Subracks and Vario-Module Pack Ripac Box-Type Plug-In Modules, 3U & 6U Ì 2.50mm front panel (anodised) with handle (2 on 6U) Ì Rear panel with DIN connector cut out (2 on 6U) Ì 2 card holders and assembly screws Ì Vented module covers should be ordered separately Description Pack Size Plug-In Modules 3U x14hp x160mm U x21hp x220mm U x42hp x220mm Covers for Modules 14HP x160mm HP x220mm HP x220mm Retaining Clips Standard (Non-EMC) Front Panels (Ripac and Ripac Vario-Module) Description Size Top & Bottom Covers 84HPx235 Vented Horizontal rails, 84HP (Includes Fixings) Front, IEEE Rear, top/bottom Z Rail for Connectors Tapped Strip, M Subrack Front Handles 3U PCB Guide Rails Standard Standard Ì Ripac ECO covers (steel) fit PCB depth only Ì Horizontal rails allows additional mounting options Ì All rails 84HP length, ends tapped M4, may be cut down Ì Rear rails tapped for backplane and connector rail mounting Ì Guide rails have retaining spring for mm PCBs Ì Standard (anodised) aluminium front panels, 2.5mm Ì Use for blanking plates Ì Mounting use M2.5 screws and plastic collars Ì Panels can be combined to fill unused space in the subrack Pack Size of Blanking Panels, Standard 3U, 4HP U, 6HP U, 8HP U, 84HP U, 4HP U, 8HP U, 84HP Panel with Type V Handle and Card Holder 3U, 4HP U, 5HP U, 8HP U, 12HP U, 4HP U, 8HP Fastening Screws and Plastic Collars for Non-EMC Panels M2.5 Slotted mm (19") Coated and Uncoated Panels Ì Standard 19" (482.6mm) panels Ì Lightweight, easy to machine aluminium Ì Choice of unfinished or a smooth black or grey powder coating List No. Height Unfinished U (mm) Order Code PBPA19001UNF 1 (44.45) PBPA19003UNF 2 (88.90) PBPA19005UNF 3 (133.35) PBPA19007UNF 4 (177.80) PBPA19008UNF 5 (222.) PBPA19010UNF 6 (266.70) PBPA19012UNF 7 (311.15) PBPA19014UNF 8 (355.60) Black PBPA19001BK2 1 (44.45) PBPA19003BK2 2 (88.90) PBPA19005BK2 3 (133.35) PBPA19007BK2 4 (177.80) PBPA19008BK2 5 (222.) PBPA19010BK2 6 (266.70) PBPA19014BK2 8 (355.60) PBPA19015BK2 9 (400.05) PBPA19017BK2 10 (444.50) Grey PBPA19001GY2 1 (44.50) PBPA19003GY2 2 (88.90) PBPA19005GY2 3 (133.40) PBPA19007GY2 4 (177.80) PBPA19008GY2 5 (222.30) PBPA19010GY2 6 (266.70) U Horizontal Cable Tidy Cabinet Accessories A 19in. mounting panel enabling tidy routing of cables from side cabling bays across the patching area. Panel height is 1U (44.45mm). Manufactured from 1.5mm sheet steel which is epoxy powder coated black. Four sturdy, open loop, clear plastic brackets capture and support the cable, which can then be broken out at any point between brackets Order Code U cable tidy

12 19" Rack Shelving Cabinet Accessories - continued 1U & 2U Rack Shelf Ì Black powder coated Ì Load capacity 22Kg Ì 364mm deep Identification Strip Ì Comprises of white paper write-on strip covered by a clear plastic overlay 10 Per Pack Price Per Pack Order Code Ì Ideal for 19" racks Ì Dimensions: 430 x 10mm 3814/ U Rack Shelf 19" Sliding Rack Tray 19" Sliding Rack Tray Ì 1U height Ì Universal equipment fixing points Ì 380mm deep Ventilation Panels 19" Black epoxy coated, steel ventilation panels for 19" rack systems. Available in standard U heights with standard fixing centres. 19" Deep Sliding Rack Tray Rack Mounting Strip Description Order Code U Rack Shelf U Rack Shelf U Sliding Rack Tray U Deep Sliding Rack Tray " Deep Sliding Rack Tray Ì 1U Height Ì Can be used upside down as a shelf Ì 380mm deep Height Order Code U U U " Security Panels A range of 19" rackmounted security panels ideal for installation over existing equipment to prevent non-authorised adjustment of settings and presets. L and U section strip with holes conforming to IEC297 made from cadmium plated mild steel and passivated for strength and long service life. Supplied in 2m (45U) lengths. L section U section U Rack Panel List No. Order Code STL Earth Continuity Kit Order Code Ì U-Shaped Rack Panel 1 2U Ì For gaps in a rack that are just too small for a 1U panel Ì 1.5mm steel, black powder coated Ì Weight: 170g Ì Five earthing straps to provide a basic rack frame with earth bonding of panels, doors etc. Ì Supplied with all associated fittings ie, Bolts, Nuts, Washers and Connectors to facilitate full installation 50 Per Pack Price Per Pack Type M5 Narrow SCF M5 Wide SCF M6 Narrow SCF M6 Wide SCF Height Order Code Plain Panels 1U U Vented Panels 1U Caged Nuts Panel cut-out 9.53x9.53 ( 3 8" x 3 8" ) A range of caged nuts suitable for fixing front panels on sub-rack systems instrument cases, etc. Available in two thread sizes, each of which is suitable for two ranges of material thickness. The steel nut is held captive in a spring steelcage. Nuts and cages are zincplated. Use NARROW for material of thickness 0.71 to 1.63 mm (22 to 16 s.w.g.) Use WIDE for material of thickness 1.83 tp 2.64 mm (15 to 12 s.w.g.) Price Per Pack 5 Per Pack Order Code Earthing Kit Panel Fixing Kits Four Kits for securing units into cabinets without damaging front panels. Packs 1 and 2 M6 x 16 machine screws and cupwashers available in 10 s or 50 s. Packs 3 and 4 As 1 and 2, but also include caged nuts. Also available in 10 s or 50 s

13 Price Per Pack Qty Pack 1 10 SCF Pack 2 50 SCF005 X Pack 3 10 SCF Pack 4 50 SCF Easy Close Telescopic Slides Telescopic Slides - DZ2601 Series Loads up to 34kg - 100% Extension H = 26.3mm, D = 12.7mm Ì Load rating up to 34kg Ì 100% extension slide Ì 12.7mm slide thickness Ì Low profile - Only 26.3mm high Slide Length Slide Travel Weight Load Rating List No. Order Code 200mm 209mm 0.46kg 16kg DZ mm 308mm 0.69kg 32kg DZ mm 357mm 0.80kg 34kg DZ Slide Length Order Code mm mm mm Telescopic Slides - DZ3832 Series Loads of up to 50kg - 100% Extension A series of light duty slides manufactured from cold rolled steel and fitted with four rows of precision ball bearings. These slides have a special Hold-in feature which prevents inadvertent or accidental opening of the cabinet draw. Ì Hold-in function Ì Soft close Ì Load rating up to 36kg Ì cycles Ì 100% extension Slide Extended Slide Load Per List No. Length (mm) Length (mm) Length (kg) Order Code DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A Price Per Pair + DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A DZ EC-A Touch Release Telescopic Slides Ì 12.7mm slide thickness Ì Front disconnect Ì Cam drawer adjust (3.2mm) Standard versions Standard Slide Length Slide Travel Weight Load Rating List No. Order Code Standard versions 199mm 203mm 620g 46kg DZ mm 243mm 790g 47kg DZ mm 305mm 950g 48kg DZ mm 356mm 1.1kg 49kg DZ mm 406mm 1.27kg 50kg DZ mm 457mm 1.42kg 50kg DZ mm 508mm 1.58kg 50kg DZ mm 559mm 1.75kg 50kg DZ mm 610mm 1.91kg 50kg DZ mm 660mm 2.06kg 49kg DZ mm 711mm 2.22kg 48kg DZ Slide Length Order Code Standard versions 199mm mm mm mm mm mm mm mm mm mm mm H = 45.7mm, D = 12.7mm A series of light to medium duty slides manufactured from cold rolled steel and fitted with four rows of precision ball bearings. Features include: Front Disconnect - Allows the drawer or chassis to be quickly removed. A lever must be actuated before the draw can be removed from the cabinet. Hold in - A stay closed feature that prevents inadvertent or accidental opening of the cabinet draw. Ì Load rating of up to 50kg Ì cycles Ì 100% extension slide Ì 12.7mm slide thickness Ì Front disconnect Ì Hold in Ì Cam draw adjust (3.2mm) Ì Touch release - push drawer front to open or close Ì Load rating up to 45kg Ì cycles Ì Activation force 5kg Ì Stay-closed feature Slide Extended Slide Load Per List No. Length (mm) Length (mm) Length (kg) Order Code DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR Price Per Pair + DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR DZ TR Soft Close Telescopic Slides Ì Soft close Ì Load rating up to 100kg Ì cycles Ì 100% extension Ì 100% extension Ì 12.7mm slide thickness Ì Front disconnect Ì Hold-in Ì Cam drawer adjust (3.2mm Ì 19.1mm slide thickness Ì Suitable for drawers up to 1000mm wide Ì Opening pull force N ± 5N Ì Soft close on last 45mm of closing cycle 2377

14 Cabinet Accessories - continued Soft Close Telescopic Slides - continued Slide Extended Slide Slide Load Per Length (kg) List No. Length (mm) Length (mm) Weight (kg) 450mm 1000mm Order Code DZ EC DZ EC-A DZ EC DZ EC DZ EC DZ EC-A DZ EC-A Price Per Pair + DZ EC DZ EC-A DZ EC DZ EC DZ EC DZ EC-A DZ EC-A Light Duty Telescopic Slides Ì Hold-out in open position Ì Load rating up to 35kg for cycles Ì Load rating up to 50kg for cycles Ì 75% extension Slide Extended Slide Load Per Length (kg) List No. Length (mm) Length (mm) cycles cycles Order Code DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO Price Per Pair + DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO DZ DO Telescopic Slide Accessories Cable Carriers and Brackets Ì 12.7mm slide thickness Ì Front disconnect Ì Hold-in Ì Cam drawer adjust (3.2mm) Operating voltages: 700L 48 to 150VDC or 100 to 230VAC 701D, 701L & 701R 12 to 48VDC 700D, 700F, 700G, 700R & 701F 12 to 48VDC or 20 to 60VAC Inspection Windows IP65, Polycarbonate Desctiption Order Code Cable Carriers Cable Widths - 31mm Cable Widths - 72mm Brackets Kit Kit Digital Hours Meters Fully Sealed Series & & Ì Sealed to IP65 from the front Ì Simple connection Ì 6 Digit LCD with 5mm Characters Ì Exceptional reliability EEPROM memory with + years data retention Ì Low Power consumption & Ì Operating indicator (Hourglass Icon) & Ì Power up LCD function test - Each digit displays an 8 for one second Ì Silent operation, no moving parts Ì UL and CE recognized The solid state Hours Meters are designed for a wide variety of industrial and commercial applications including, scheduled maintenance - warranty and leasing, Medical equipment, transport and industrial vehicles and other industrial equipment. 2 Wire Meters - Display only when powered 3 Wire Meters - Have provision for continuous display Display 6 Digit LCD, 5mm High Mechanical Shock SAE J 1387, 55g Range 99,999.9 hours Mechanical Vibration SAE J 1387, 20g Accuracy 0.1% Operating Frequency 48 TO 440Hz Operating Temperature -40 to 85 C IP Rating - Front/Rear IP65, IP50 Storage Temperature -50 to 85 C Material, Panel Cut out Order Code Case/Lens Termination W x H (mm) ABS/Acrylic Packard (2 Pin) / 2 Wire 36.8 x Polycarbonate/Polycarbonate Molex / 3 Wire 36.8 x Polycarbonate/Polycarbonate Molex / 2 Wire 36.8 x ABS/Acrylic ¼" Spade / 2 Wire 36.8 x ABS/Acrylic ¼" Spade / 3 Wire 36.8 x ABS/Acrylic 3/16" Spade / 3 Wire 45 x ABS/Acrylic 3/16" Spade / 2 Wire 45 x Polycarbonate/Glass ¼" Spade / 3 Wire 52mm Diameter Polycarbonate/Glass ¼" Spade / 2 Wire 52mm Diameter Model List No. No. Order Code G B L B L F F D D R R DZCC11-AD List No. DZ Order Code Cable Carriers For use with: Cable carrying widths up to 31mm DZCC5-AD Cable carrying widths up to 72mm DZCC11-AD Brackets For use with: Telescopic Slides DZ0204 DZ Telescopic Slides DZ3307 DZ H W Description Order Code List No. (mm) (mm) Window for 36 modules L44 II Window for 26 modules L43 II Window for 24 modules L24 II Window for 12 modules L12 II Note: These windows can be fitted to most plastic/metal enclosures List No. Order Code L44 II L43 II L24 II L12 II

15 Shielding Cabinets WE-SHC Series List No. Order Code x 20 x 3mm SMD THT Cover x x 3mm SMD THT Cover x 30 x 3mm SMD THT Cover x 50 x 3mm SMD THT Cover x 60 x 3mm SMD THT Cover Cabinet Thermal Management Touch-Safe Small Heater CSK 060 Series The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation. Ì Low surface temperature Ì Double insulated (plastic housing) Ì Wide voltage range Ì Dynamic heating up Ì Clip fixing Heating element PTC resistor - temperature limiting Surface temperature <85 C (according to VDE 0100), except upper protective grille Connection 2-pole terminal 2.5mm 2, torque 0.8Nm max. Casing Plastic according to UL94 V-0, black Mounting Clip for 35mm DIN rail, EN Fitting position Vertical airflow (air outlet up, connection on bottom) Operating / Storage temperature -45 C to +70 C Protection class IP20 Protection type II (double insulated) Heating Operating Max. List No. Capacity Voltage Current (Inrush) Order Code W 120 to 240V AC/DC 2.5A W 120 to 240V AC/DC 1A W 12 to 30V AC/DC 8A W 12 to 30V AC/DC Ì Tin plate in accordance with DIN EN 10202/10203 Ì Shielding effectiveness up to 55 db Ì Two-part case consisting of a solderable grid frame (SMD/THT) and a removable cover Ì Applications: To prevent EMI radiation from PCB and to keep sensitivity low of RF output stages, RF input and amplifier stages, Oscillators and EMC sensitive parts in plastic cases Dimensions: H=98, W=38, D=75mm Touch-Safe Heater CS 060 Series Ì Low surface temperature Ì Quick mounting due to clip fixing Ì Double insulated (plastic) Ì Wide voltage range Ì Small size Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. The heaters are designed for permanent opperation. Dimensions: H=110, W=60, D=90mm Heating element PTC resistor - temperature limiting Surface temperature <80 C, except upper protective grille Connection 4-pole terminal 2.5mm 2, torque 0.8Nm max. Casing Plastic according to UL94 V-0, black Mounting Clip for 35mm DIN rail, EN Fitting position Vertical airflow (air outlet up, connection on bottom) Operating / Storage temperature -45 C to +70 C Protection class IP20 Protection type II (double insulated) Heating Operating Max. List No. Capacity Voltage Current (Inrush) Order Code W 120 to 240V AC/DC 4A W 120 to 240V AC/DC 8A W 120 to 240V AC/DC 8A W 12 to 30V AC/DC W 12 to 30V AC/DC W 12 to 30V AC/DC Dimensions (50W): H=110, W=60, D=90mm Dimensions (100W): H=110, W=60, D=90mm Dimensions (150W): H=150, W=60, D=90mm Touch-Safe Heater - Intergrated T/Stat CSF 060 Series Ì Low surface temperature Ì Integrated thermostat Ì Quick mounting due to clip fixing Ì Double insulated (plastic) Ì Wide voltage range Ì Small size Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. This model with plug-in thermostat does not require additional wiring. The heaters are designed for permanent operation. Heating element PTC resistor - temperature limiting Surface temperature <80 C, except upper protective grille Connection 2-pole terminal 2.5mm 2, torque 0.8Nm max. Casing Plastic according to UL94 V-0, black Mounting Clip for 35mm DIN rail, EN Fitting position Vertical airflow (air outlet up, connection on bottom) Operating / Storage temperature -40 C to +70 C / -45 C to +70 C Protection class IP20 Protection type II (double insulated) Heating Inrush Pre-fuse Air Outlet Switch Off Switch On List No. Capacity Current Max. T (time-delay) Temperature Temperature Temperature Order Code W 2.5A 4A +86 C +15 C +5 C W 2.5A 4A +86 C + C +15 C W 4.5A 8A +120 C +15 C +5 C W 4.5A 8A +120 C + C +15 C W 8A 8A +145 C +15 C +5 C W 8A 8A +145 C + C +15 C Compact Semiconductor Fan Heater CS 028/CSL 028 Ì Small, compact design Ì Quiet in operation Ì Dynamic heating up Ì Clip or screw fixing Fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The heater is connected using the internal terminal connectors The small size of the CS 028/CSL 028 makes it ideal for use in enclosures where space is at a premium. 2379

16 Cabinet Thermal Management - continued Compact Semiconductor Fan Heater - continued CS 028/CSL continued Operating voltage Heating element Surface temperature Connection Casing Mounting Fitting position Operating / Storage temperature Protection class Protection type Ì A range of ultra compact forced convection heaters Ì Heaters combine forced convection and PTC technology to achieve quicker and more efficient heating Ì Supplied pre-wired and with DIN-Clip Ì No thermostat/overload required Ì Life expectancy up to 120, C Ì Units supplied with finger guards except 20W which is supplied with exhaust guards only Ì Heater and fan can be controlled independently allowing fan only operation Ì Applications include anti-condensation and frost protection in cabinets and enclosures Ì Lead length 600mm Dimensions Power Voltage input Outlet nozzle temp LxWxD Ouput Heater 10mm and 10 C List No. Order Code 72x27x27 20W 10-30V 12V 35 C C-20-12V-12VDC x82x W/600W 230V 230V 50 C/105 C C80-300/ x82x W/800W 230V 230V 80 C/145 C C80-450/ Power Output Order Code W W/600W W/800W Desiccators Silica Gel/Molecular Sieves 230VAC, 50/60Hz PTC heating element 150W/0W: 50 C max., except upper protective grille 400W: 65 C max., except upper protective grille at 20 C ambient temperature 2-pole clamp max. 2.5mm 2 (CSL 028 with strain relief), clamping screw torque 0.8Nm max. Plastic according to UL94 V-0, black Clip for 35mm DIN rail, EN or screw fixing (Ø 5.3mm) Vertical airflow (air outlet up) -45 C to +70 C IP20 II (double insulated) Heating Inrush Pre-fuse List No. Capacity Current Max. T (time-delay) Dimensions Order Code Clip Fixing W 12A 6.3A 75 x 65 x 90mm W 9A 6.3A 90 x 85 x 111mm W 15A 10A 90 x 85 x 111mm Screw Fixing W 12A 6.3A 75 x 65 x 90mm W 9A 6.3A 90 x 85 x 111mm W 15A 10A 90 x 85 x 111mm Forced Convection Heaters Ì Protects enclosures against corrosion, dampness and condensation Ì Single circular mounting hole. Locknut and sealing ring supplied Ì All indicators change colour from blue to pink in presence of moisture Ì Polycarbonate housing contains absorbing agent which reduces airborne moisture Ì May be used in electronic, telecommunications and computer equipment housing Ì Reactivation possible (place into a ventilated oven at Desiccator 120 C for 4 hours) Ì In-built saturation indicator Ì Life span, 3-6 months for IP55 and 6-9 months for IP67 enclosures CAUTION : SILICA GEL DESICCATORS SHOULD BE ALLOWED TO COOL IN A SEALED CONTAINER FOL- LOWING REACTIVATION Clearance Silica Gel Desiccators Hole Ømm Order Code g Anti Corrosion Vapour Capsules Protective Volume External Dimensions Radius Protected Useful Life H W D Order Code 0.6m 0.95m 3 1 year Order Code Filter Fans, IP Rated Click and Fit Power Air Flow Installation Dimensions Weight List No. Voltage Watts Free m 3 /h With filter m 3 /h cut out HxWxD kg PF1000 (230V) 230V x x 105 x PF2000 (230V) 230V x x 150 x PF00 (230V) 230V x x 0 x PF3000 (230V) 230V x x 0 x PF5000 (230V) 230V x x 3 x List No. Order Code PF1000 (230V) PF2000 (230V) PF00 (230V) PF3000 (230V) PF5000 (230V) Exhaust Filters PFA1000 for PF PFA2000 for PF PFA3000 for PF00 and PF Thermostats Ì Miniature thermostats moulded in flame retardant ABS Ì Flammability rated to UL94V-0. Sealed to IP30 Ì Normally closed contact versions can be used for heater control on enclosures Ì Normally open contact versions can be used for fan control, ventilator control etc. Ì Quick and simple mounting on 35mm DIN rail Normally open Normally closed H=60, W=33, D=35 Temp. adjustment range: 0-60 C Switching Capacity: 6A@0Vac (resistive load)v Order Code Normally open Normally closed Electronic Thermostat ETR 011 Ì Offer protection to enclosures from rust Ì Protects: Iron, Steel, Copper, Brass and Aluminium Ì Non hazardous Ì Continuous temperature rating up to +70 C Ì Click and fit, no screws required Ì Includes fan and twin finger guards to allow filter replacement without disconnecting supply Ì 115v AC and 230v AC versions available Ì IP54 protection rating, except PF1000 which is IP43 Ì 6 sizes available Ì UL recognised Ì Terminal connection Ì Replacement filters available Ì Large setting range Ì Small hysteresis Ì Optical operating display (LED) Ì Change-over contact Ì Clip fixing The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via relay with changeover contact. The LED integrated in the adjustment knob is lit when the NC contact is closed (e.g. when a connected heater is operating). Dimensions: H=64.5, W=42, D=38mm 2380

17 Operating voltage 0VAC, 50/60Hz Setting range -20 C to 60 C Switch difference 4K (±1K tolerance) at 20 C Sensor element NTC Contact type change-over contact (relay) Service life >50000 cycles Max. switching capacity (relay output) 240VAC, 8A 24VDC, 4A Optical indicator LED Moutning Clip for 35mm DIN rail, EN Casing Plastic according to UL94 V-0, light grey Fitting position Vertical Operating / Storage temperature -40 C to 85 C Operating / Storage humidity 90% max. RH (non-condensing) Protection type IP Compact Thermostat STO 011 / STS 011 Dimensions: H=70, W=33, D=42mm The mechanical thermostat is a two state regulator with small hysteresis. The setting wheel has an anti frost assurance. The housing ensures an optimized air circulation around the bimetal. Setting range 0 C to 60 C Switch difference 4K (±3K tolerance) Sensor element Thermostatic bimetal Contact type Snap-action contact Service life > cycles Max. switching capacity (relay output) 0VAC, 10A 120VAC, 15A 30WDC at 24VDC to 72VDC Max. inrush current 16A for 10 sec. Moutning Clip for 35mm DIN rail, EN Casing Plastic according to UL94 V-0, light grey Fitting position Variable Operating / Storage temperature -45 C to 80 C Operating / Storage humidity 90% max. RH (non-condensing) Protection type IP Normally Closed Normally Open Electronic Thermostat ET 011 Ì Thumbwheel setting dial Ì Small hysteresis Ì High switching capacity Ì Anti frost assurance Ì Optimized housing for better air flow Ì Normally closed: contact breaker for regulating heaters Ì Normally open: contact maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded Ì High DC breaking capacity Ì Low hysteresis Ì Adjustable temperature Ì Change-over contact Ì Clip fixing Electronic thermostat for regulating high performance DC 24V equipment. Heating or cooling appliances as well as signal devices can be switched via the potential free change-over contact. In comparison to mechanical thermostats, the ET 011 has a low hysteresis making the switching point and setting accuracy more precise. Dimensions: H=67, W=50, D=46mm Switch temperature difference 3K approx. Sensor element PTC Contact type Change-over Service life > cycles Max. switching capacity (relay output) 28VDC, 16A Max. inrush current 16A for 10 sec. Moutning Clip for 35mm DIN rail, EN Casing Plastic according to UL94 V-0, light grey Fitting position Vertical Operating / Storage temperature 0 C to 60 C / -45 C to 80 C Operating / Storage humidity 90% max. RH (non-condensing) Protection type IP Electronic Hygrostat EFR 012 Ì Adjustable and pre-set relative humidity Ì Optical operating display (LED) Ì High switching capacity Ì Clip fixing Ì Temperature-compensated The electronic hygrostat senses the relative humidity in an enclosure with electric/electronic components, and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure. The LED integrated in the adjustment knob is lit when the connected heater is in operation. Dimensions: H=64.5, W=42, D=38mm Operating voltage 230VAC, 50/60Hz Switch difference 5% RH (±3% RH tolerance) at C (50% RH) Reaction time 5 sec. Contact type Change-over contact (relay) Service life >50000 cycles Max. switching capacity (relay output) 240VAC, 8A 24VDC, 4A Optical indicator LED Moutning Clip for 35mm DIN rail, EN Casing Plastic according to UL94 V-0, light grey Fitting position Vertical Operating / Storage temperature 0 C to 60 C / -20 C to 70 C Operating / Storage humidity 90% max. RH (non-condensing) Protection type IP Setting List No. Range Order Code to 90% RH % RH pre-set Electronic Hygrotherm ETF 012 Ì Temperature and humidity adjustable Ì Optical operating display (LED) Ì High switching capacity Ì Clip fixing The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components, and turns on a heater (or alternatively, a fan) at either set point, helping prevent the formation of condensation in the enclosure. The LED integrated in the adjustment knob on the active controller is lit when the connected device is in operation. Dimensions: H=77, W=60, D=43mm Operating voltage 230VAC, 50/60Hz Setting range temperature 0 C to 60 C Setting range humidity 50 to 90% RH Switch difference (temperature) 2K (±1K tolerance) at C (50% RH) Switch difference (humidity) 4% RH (±1% tolerance) at C (50% RH) Reaction time (humidity) 5 sec. Contact type Change-over contact (relay) Service life NC: >50000 cycles NO: > cycles Max. switching capacity (relay output) NC: 240VAC, 6A NO: 240VAC, 8A 24VDC, 4A Optical indicator LED Moutning Clip for 35mm DIN rail, EN Casing Plastic according to UL94 V-0, light grey Fitting position Vertical Operating / Storage temperature 0 C to 60 C / -20 C to 80 C Operating / Storage humidity 90% max. RH (non-condensing) Protection type IP Roof Filter Fan 300m 3 /h, 500m 3 /h Ì Very low noise Ì Minimal depth in enclosure Ì High through-flow air volume Ì High reliability Ì Time-saving installation and mat exchange Roof filter fans find use in enclosures and housings, from which warm air has to be diverted to lower the internal temperature. These low-noise roof filter fans are used to expel warm air from within the enclosure which has been generated by the stray power of the components and so protects the internal devices from overheating. To exchange the filter mat the hood can be easily opened without tools. The roof exit filter provides passive ventilation. 2381

18 Cabinet Thermal Management - continued Roof Filter Fan - continued 300m 3 /h, 500m 3 /h - continued Axial fans, ball bearing Service life 50000h at C (65% RH) fan body aluminium, rotor plastic Connection 3-pole clamp for 2.5mm 2, clamping torque 0.8Nm max. Case Plastic according to UL94 V-0, light grey; weather proof and UV light resistant according UL746C (f1) Filter mat G3 acc. to DIN EN 779, filtering degree 85% Filter material synthetic fibre with progressive construction, temperature resistant to 100 C, self-extinguishing class F1;moisture resistant to 100% RH, reusable - cleaning by washing or vacuuming Operating / Storage humidity 90% max. RH (non-condensing) Protection type / Protection class IP32 / I (earthed) Operating Air Volume, Average Depth In Operating / Storage List No. Voltage Free Flow Noise Level Enclsoure Temperature Roof Filter Fan VAC, 50Hz 300m³/h 55dBA 52mm -10 C to 70 C / -40 C to 70 C VAC, 50Hz 500m³/h 67dBA 107mm - C to 70 C Depth In Filter Protection List No. Enclosure Mat Type Roof Exit Filter mm G3 acc. to DIN EN 779, filtering degree 85% IP Roof Filter Fan Roof Exit Filter Pressure Compensation Device IP66 Ì High degree of protection Ì Semipermeable membrane Ì Easy to install Mounting M40 x 135 with nut Torque 5Nm (10Nm max.) Depth in enclosure 16mm approx. Material Plastic, light grey Sealing NBR Filter Semipermeable membrane Air permeability 1200l/h at a pressure difference of min. 70mbar Operating / Storage temperature -35 C to 70 C Dimensions: D=37, Dia.=60mm Drainage Device IP66 / IP67 / IP69K Ì High degree of protection Ì Robust, weather Ì Good drainage performance and UV-light protected Ì Easy to install housing Mounting M50 x 1.5 with nut (wrench size: nut 60mm, housing 50mm) Torque 6Nm max. Depth in enclosure 17.5mm approx. Material Plastic according to UL94 V-0, umbra grey, weather proof and UV light resistant according UL746C (f1) Sealing NBR Water flow-though 200ml/h approx. at a water column of 5mm Water entry hight 0mm (at 0.5mm wall thickness) Operating / Storage temperature -35 C to 70 C Dimensions: D=49.5, Dia.=60mm Miniature Panel Heaters Ì Miniature self-regulating heaters with PTC elements. Sealed to IP54. Ì Anodised aluminium body provides large heating surface for good convection Ì Quick and simple mounting on 35mm symmetrical DIN rail Ì Long service life due to being constucted without any mechanical parts Ì Fitted with 0.3 metre long, two core, silicone insulated cable Note: Heaters should be installed as low as possible in the panel in a vertical position. Cable and combustible materials should be kept well clear of heating fins. Supply Voltage 140 to 0Vac or dc Power Rating(W) Starting Current(A) H W D Weight kg Order Code A A A Power Rating Order Code W W W Self-Regulating - IP54 With PTC Elements Ì Self contained within anodised aluminium extrusion Ì Large surface area for rapid heat dispersion and strong convection effect Ì 35mm symmetric DIN rail mounting for ease of installation Ì Splashproof seal to IP54, tropicalised, comply with DIN VDE0700 Pt1 Ì Fitted with 0.5m of three core silicone insulated flex Note: Heaters should be installed as low as possible in the panel in a vertical position. Cables and combustible materials should be kept well clear of the heating fins. Supply voltage 140 to 0V ac or dc Normal Surface Dimensions Power Rating Max. Current Temp C H W D Weight kg Order Code 15W 0.5A W 0.5A W 1.5A W 2.4A W 4.5A Power Rating Order Code W W W W W INTELLIGENT ONLINE BUYING SYSTEM PROVIDING Complete cost control, reduced administration time, visibility of your spend, flexibility and personalised to your company s needs. farnell.com/ibuy 2382

19

20 Controlling Your Energy Savings