Bone-in. Scalloped Band Knives SAW / SLICING BLADES. Boneless. Order at: Phone: (661) /8"

Transcription

1 60 About Our Blades... Blades are available in 4 tooth configuration for lengths under 100", 3 tooth configuration for lengths over 100". The blades are carbon steel with hardened back and hardened tips. Additional lengths available upon request. 5/8" Bone-in.022" 4 TEETH PER INCH SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band Scalloped Band Knives These Wavy Edge Band Knives are ideal for boneless and soft bone material such as chicken. Pre-welded with a double bevel edge these high quality band knives are ready for immediate shipment. Additional lengths available upon request. Boneless SAW / SLICING BLADES HT123 Safety Glove Cloth w/ Steel Wire 3 TEETH PER INCH SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band SB " Band This glove is ambidextrous... fits right or left hand 3 TEETH PER INCH BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife BK " Band Knife The above described parts are supplied by National Band Saw Company as replacement parts for Food Processing Machines

2 61 National Band Saw, Established National Band Saw, Established1953 SAW/SLICING BLADES All American " All American " All American " All American Challenger - C " Biro - AA, AA1...91" Biro Super - BB " Biro " Biro " Biro " Biro " Biro " Biro " Biro " Biro " Butcher Boy - Royal " Butcher Boy - Junior " Butcher Boy - Senior " Butcher Boy - B " Butcher Boy - B14, Cobra " Butcher Boy - B16, SA16, Cobra " Butcher Boy - SA " Blade Lengths MAKE & MODEL LENGTH MAKE & MODEL LENGTH Hollymatic Hi Yield " Jim Vaughan - A, B, D, E " Jim Vaughan - C, H...98" Jim Vaughan - G1, G15, K " Jim Vaughan - F " Jim Vaughan - L...63" Kentmaster " National " Peerless - Small...87" Peerless - Medium " Peerless - Large " Pesco " Regal - 3A, 3AS " Regal - 5A, 5AS " Sanitary - KB " Sanitary - SH " SAW / SLICING BLADES Cleveland Kleen Kutter - 47, 55, KK " Cleveland Kleen Kutter , 2247US " Cleveland Kleen Kutter " Craftsman...79" Do-AIl - MS " Easyspeed " Fleetwood - B " Fleetwood - B32, B34, B34AT...98" Fleetwood - B " Globe Stimson " Globe Stimson " Globe Stimson " Globe Stimson " Globe Stimson " Hobart , " Hobart , 5213, " Hobart , 5114, 5214, 5413, 5514, " Hobart , 5116, 5216, 5216HS " Hobart , 5701, 5801, " " Superior - 19 (36" Table) " Superior - 19 (34" Table) " Superior Jones - Junior " Superior Jones - Senior " Superior Jones -Packing House " Superior - 53, " Toledo , 5201, 5205, " Toledo " Torrey " Torrey ST " Torrey ST " Triplex " U.S. Berkel - 5, JR " U.S. Berkel - 5, SR " U.S. Berkel/Jim Vaughan - V " U.S. Berkel/Jim Vaughan - V " U.S. Berkel/Jim Vaughan - V " Wells - Clever Cutter...93" Wells - Quikut - Junior...93" Wells - Quikut - K, L " Wells - Quikut - J, S " Westglen - Cobra " Westglen " Westglen S " The above described parts are supplied by National Band Saw Company as replacement parts for Food Processing Machines The above described parts are supplied by National Band Saw Company as replacement parts for Food Processing Machines Order at:

3 SAW / SLICING BLADES National Band Saw, Established Grasselli Slicing Blades SB3006 Mini-B Edge Blade 5/8 x.020 x 17 5/8" SB3000 Knife Edge Blade 5/8 x.020 x 17 5/8" SB30002 Toothe Edge 4 TPI 5/8 x.022 x 17 5/8" SB3004 Scalloped Edge Blade 5/8 x.020 x 17 5/8" SB3007 Mini-B Edge Blade 5/8 x.022 x 17 5/8" SB3001 Knife Edge Blade 5/8 x.022 x 17 5/8" SB3003 Toothe Edge 6 TPI 5/8 x.022 x 17 5/8" SB3005 Scalloped Edge Blade 5/8 x.022 x 17 5/8" Handsaw Blades HB12-20 Hand Saw Blade 20 Long x 1/2 wide.025 thick 10 Teeth /Inch HB12-25 Hand Saw Blade 25 Long x 1/2 wide.025 thick 10 Teeth /Inch HB12-27 Hand Saw Blade 27 Long x 1/2 wide.025 thick 10 Teeth /Inch HB58-20 Hand Saw Blade 20 Long x 5/8 wide.025 thick 10 Teeth /Inch HB58-25 Hand Saw Blade 25 Long x 5/8 wide.025 thick 10 Teeth /Inch HB58-27 Hand Saw Blade 27 Long x 5/8 wide.025 thick 10 Teeth /Inch HT123 Safety Glove Cloth w/ Steel Wire This glove is ambidextrous... fits right or left hand The above described parts are supplied by National Band Saw Company as replacement parts for Food Processing Machines

4 63 National Band Saw, Established National Band Saw, Established For more parts, Specials, Sales, Discounts and Promotions! Check your order, item history and track your packages SAW/SLICING BLADES COUPON CODE: SAWBLADE15 Save 15% off entire purchase of blades at One time use per account Valid 1/2018 to 12/31/18 SAW / SLICING BLADES nationalbandsaw nbsparts.com/blog nationalbandsaw nationalbandsaw NOTES: The above described parts are supplied by National Band Saw Company as replacement parts for Food Processing Machines The above described parts are supplied by National Band Saw Company as replacement parts for Food Processing Machines Order at:

5 64 Adjustable Head SHAFT & WHEEL ASSEMBLIES UPPER WHEEL Tension Adjustment Upper Shaft & Bearing Assy Upper Wheel Upper Wheel & Bearing Assy Upper Wheel Complete Assy Adjustable Head B078A B137A Hinge Plate Adjustable Head Fixed Head Tension B207A Adjustment B220A Fixed Head Hinge Plate Assy Stainless Steel fits... Fixed Head WHEEL WITH SAW SHAFT & WHEEL WHEEL WHEEL WITH SHAFT, BEARING MODEL # BEARING ASSY ONLY DIAMETER SHAFT & BEARING * AND HINGE PLATE HINGE PLATE 22 B033A-247 B091U 12" B091A-U N/A B078A 33 B033A-247 B043-3U 15" B043A-3U B148A B137A 34 B033A-247 B043-3U 15" B043A-3U B148A B137A 44 B067A-247 B135-3U 18" B135A-3U N/A N/A 1433 B033A-247 B167U 14" B168A-U B169A B078A 1433FH B033A-247 B167U 14" B168A-U B221A (Fixed Head) B220A (Fixed Head) 3334 B033A-247 B124-3U 16" B124A-3U B138A B137A 3334FH B033A-247 B124-3U 16" B124A-3U B208A (Fixed Head) B207A (Fixed Head) 3334 B033A-247 B230-3UDF** 16" B231A-3UDF** B232A-3UDF** B137A 3334FH B033A-247 B230-3UDF** 16" B231A-3UDF** B233A-3UDF Fixed Head B207A 4436 B067A-247 B135-3U 18" B135A-3U N/A N/A ** DF Is for Double Flange. Some Biro Wheels have the Flange on both sides of the wheel LOWER WHEEL Lower Shaft & Bearing Assy * Lower Shaft & Hub Assy Tension Adjust Below Wheel Complete with Wheel, Shaft, Bearings, Seal, * Gaskets, Spacer, Hub Cap & Retainer Fixed Head BIRO SAW MODEL # SHAFT & BEARING ASSY MAIN BEARING HOUSING ASSY WHEEL ONLY WHEEL DIAMETER 22 B032A-361/22 N/A B091L 12" 33 B032A-361/33 B143A B043-3L 15" 33 OLD STYLE B032A-361/100 N/A B043-3L 15" 34 B032A-361/34 N/A B043-3L 15" 44 B032A-361/44 N/A B135-3L 18" 1433 Tapered Shaft 14 deg B182A B181A B183L 14" 3334 Straight Shaft 3 deg B032A-361/33 B143A B124-3L 16" 3334 Straight Shaft DF 3 deg B032A-361/33 B143A B234-3LDF** 16" 3334 Tapered Shaft 14 deg B182A B181A B226 16" 3334FH Straight Shaft 3 deg B032A-361/33 B143A B124-3L 16" 4436 B032A-361/44 N/A B135-3L 18" The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

6 BIRO ADJUSTABLE HEAD B076 Upper Wheel Aligning Screw B137A Hinge Plate, with Aligning Screw and Wheel Scraper Assy Fits... 33, 34, 3334 B078A Hinge Plate, with Aligning Screw and Wheel Scraper Assy Fits...22, 1433 B199 B201 B198 B207A Hinge Plate Assy 3334FH with Spring, O-Ring Indicator, Aligning Screw and Wheel Scraper Assy B220A Hinge Plate Assy 1433FH with Spring, O-Ring Indicator, Aligning Screw and Wheel Scraper Assy Spring, O-ring, Indicator and Bolt and nut are included in B207A and B220A FIXED HEAD B FH Hinge Plate B FH Hinge Plate B076 Upper Wheel Aligning Screw B1999 Spring B198 Indicator B201 O-Ring B210 Housing B218 Hinge Plate Bolt O-Ring Washer B216 Washer Adjustable Head -tension adjustment on side of machine with Ratchet Assy Most of these items also fit the 1433FH B214 O-Ring B209 Tension Adjusting Screw Fixed Head -tension adjustment below upper wheel B200 Handle Mounting Hardware B196 Handle B197 Pin & Spring NBS P/N OEM P/N DESCRIPTION FH FH B076 S253 Upper Wheel Aligning Screw X X X X X X X B078A S12335X Hinge Plate X X B137A S16335X Hinge Plate X X X B195 S16335XE Hinge Plate With Cylinder X B Handle X X B Pin & Spring X X B Indicator X X B Spring X X X X X B200 HH5048S Handle Mounting Hardware X X B O-Ring X X B207A AS16335XE Hinge Plate Assy X B Tension Adjusting Screw X X B Housing X X B O-Ring X X B Washer X X B218 HHS 0481S Hinge Plate Bolt - Staineless Steel X X B219 S 14335XE Hinge Plate X B220A Hinge Plate Assy X B Washero, O-Ring X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

7 66 Upper Shaft Models: 11, 22, 33, 34, 1433, 1433FH, 3334, 3334FH B Upper Shaft Lock Nut B Upper Shaft Seal B033A-247 Upper Shaft & Bearing Assembly B Upper Shaft BIRO B Upper Wheel Hub Cap B084 Hub Gasket/Neoprene Bearings O.D. 2 1/32" B052-1 Upper Main Bearing Spacer BMB100/204 Upper Main Bearing TIMKEN BMB100/204 Upper Main Bearing TIMKEN B Castellated Lock Nut B Upper Shaft Lock Washer B225 Retaining Ring Some versions of Biro wheels have internal retaining rings. They are not required and can be replaced with the B052-1 Main Spacer Shown above NBS P/N OEM P/N DESCRIPTION FH FH B Upper Shaft X X X X X X X X B033A-247 A247 Upper Shaft & Bearing Assembly X X X X X X X X B Upper Wheel Hub Cap X X X X X X X X B Castellated Lock Nut X X X X X X X X B Upper Shaft Lock Washer X X X X X X X X B Upper Main Bearing Spacer X X X X X X X X B Upper Shaft Seal X X X X X X X X B Upper Shaft Lock Nut X X X X X X X X B Hub Gasket/Neoprene X X X X X X X X B Retaining Ring X X X X BMB100/ Upper Main Bearing X X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

8 Upper Shaft Models 44, 4436, 55 B Upper Shaft Nut B Upper Shaft Seal B067A-247 Upper Shaft & Bearing Assy BIRO B Upper Shaft B085 Hub Gasket, Neoprene B /44 Hub Cap BMB523/590 UpMKEN pper Main Bearing TIM B069-1 Upper Bearing Spacer Bearings O.D. 2 3/8" BMB523/590 Upper Main Bearing TIMKEN B Upper Shaft Lock Washer B Castellated Lock Nut NBS P/N OEM P/N DESCRIPTION B / Hub Cap X X X B Castellated Lock Nut X X X B Upper Shaft Lock Washer X X X B Upper Shaft X X X B067A (A18247) Upper Shaft & Bearing Assembly X X X B (18001) Upper Bearing Spacer X X X B Upper Shaft Seal X X X B (18252) Upper Shaft Nut X X X B Hub Gasket, Neoprene X X X BMB523/ (A18227) Upper Main Bearing X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

9 68 Lower Shaft Model 22 B060R-300 Lower Shaft Key - Rear BMB100/204 Lower Main Bearing TIMKEN B057A-362/22 Lower Shaft Seal & Bearing Case Cap B032A-361/22 Lower Shaft & Bearing Assembly THIS USES A SMALLER BEARING BMB100/204 Bearings B057A-362/22 Lower Shaft Seal & Bearing Case Cap B /22 Lower Shaft Nut B060F-300 Lower Shaft Key - Front BMB100/204 Lower Main Bearing TIMKEN B /22 Lower Shaft B /22 Lower Bearing Case Cap MODELS WITH S/N BELOW USE BMB100/204 BEARINGS Bearings O.D. 2 1/32" BMB523/578 Lower Main Bearing TIMKEN B057A-362/33 Lower Shaft Seal & BIRO B Lower Shaft Seal B060R-300 Lower Shaft Key - Rear B057A-362/33 Lower Shaft Seal & Bearing Case Cap B060F-300 Lower Shaft Key - Front B /22 Lower Shaft 4 -- MODELS WITH S/N ABOVE USE BMB523/578 BEARINGS Bearings O.D. 2 3/8" BMB523/578 Lower Main Bearing TIMKEN B032A-361/ /523 Lower Shaft & Bearing Assembly THIS USES A LARGER BEARING BMB523/578 Bearings B /22 Lower Shaft Nut B /33 Lower Bearing Case Cap B Lower Shaft Seal NBS P/N OEM P/N DESCRIPTION 22 O/S 22 N/S B / Lower Shaft X X B032A-361/22 A361 Lower Shaft & Bearing Assy - SMALL BEARING X B032A-361/523 A361 Lower Shaft & Bearing Assy - LARGE BEARING X B Lower Shaft Seal X X B057A-362/22 N/A Lower Shaft Seal & Bearing Case Cap X B057A-362/33 N/A Lower Shaft Seal & Bearing Case Cap X B / Lower Bearing Case Cap X B / Lower Bearing Case Cap X B060F Lower Shaft Key - Front X X B060R Lower Shaft Key - Rear X X B / Lower Shaft Nut X X BMB100/204 A227 Lower Main Bearing X BMB523/578 A363 Lower Main Bearing X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

10 B032A-361/33 Lower Shaft & Bearing Assembly WITH LARGER BEARING Uses B /33 shaft Uses Bearing No. BMB523/578 (2 3/8" O.D.) Lower Shaft- Models 33, 3334, and 3334FH * Straight Shaft Only * O.D. 2 3/8" B057A-362/33 Lower Shaft Seal & Bearing Case Cap B032A-361/100 Lower Shaft & Bearing Assembly WITH SMALLER BEARING Uses B /33 shaft Uses Bearing No. BMB100/204 (2 1/32" O.D.) Note: Housing is not available for old style shaft B060R-300 Lower Shaft Key - Rear BMB523/578 Lower Main Bearing TIMKEN BIRO BMB100/204 Lower Main Bearing TIMKEN Bearings O.D. 2 1/32" B060F-300 Lower Shaft Key - Front B /33 Lower Shaft (Straight shaft) B186 Grease Fitting B057A-362/33 Lower Shaft Seal & Bearing Case Cap BMB523/578 Lower Main Bearing TIMKEN Straight Shaft 3 deg taper B Lower Shaft Nut B142 Lower Bearing Housing w/ Grease Fitting B Lower Shaft Seal B /33 Lower Bearing Case Cap B143A Lower Bearing Housing Assembly Complete NBS P/N OEM P/N DESCRIPTION O/S FH* B /33 (361) Lower Shaft X X X X B032A-361/33 N/A Lower Shaft & Bearing Assembly USES LARGER BEARING X X X B032A-361/100 N/A Lower Shaft & Bearing Assembly USES SMALLER BEARING X X B Lower Shaft Seal X X X B057A-362/33 N/A Lower Shaft Seal & Bearing Case Cap X X X B / Lower Bearing Case Cap X X X B060F Lower Shaft Key - Front X X X X B060R Lower Shaft Key - Rear X X X X B (303) Lower Shaft Nut X X X X B142 (360) Lower Bearing Housing X X X B143A A16360 Lower Bearing Housing Assembly - Complete X X X B A1 Grease Fitting X X X BMB100/204 A263 Lower Main Bearing X BMB523/578 (A363) Lower Main Bearing X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

11 70 Lower Shaft Components- Model 1433, 1433FH and 3334 FH Bearings O.D. 2 3/8" Tapered Shaft Only B176 Spacer BMB523/578 Lower Main Bearing TIMKEN B170 T-Handle Lock 7/8-9 B182A Lower Shaft & Bearing Assembly B172 Key B171 Shaft, Lower Saw Wheel (Tapered Shaft) Tapered Shaft 14 deg No key needed B173 Grease Seal Front 2 1/2"OD B186 Grease Fitting BMB523/578 Lower Main Bearing TIMKEN B174 Retaining Ring, Internal B175 Retaining Ring, Small B177A Lower Shaft Seal & Bearing Case Cap BIRO B178 Grease Seal Rear 1 11/16" OD B179 Lower Bearing Housing Cap B180 Lower Bearing Housing w/ Grease Fitting B181A Lower Bearing Housing Assembly NBS P/N OEM P/N DESCRIPTION FH 3334FH B T-Handle Lock X X X B Shaft, Lower Saw Wheel X X X B Key X X X B Grease Seal, 1.50 ID X X X B Retaining Ring, Internal 2 7/8 ID X X X B Retaining Ring, Small X X X B Spacer X X X B177A N/A Lower Shaft Seal & Lower Bearing Housing Cap X X X B Grease Seal, 7/8 ID X X X B Lower Bearing Housing Cap X X X B Lower Bearing Housing X X X B181A A16547 Lower Bearing Housing Assembly X X X B182A N/A Lower Shaft & Bearing Assembly X X X B Grease Fitting X X X BMB523/ Lower Main Bearing X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

12 Lower Shaft Model 34 B057A-362/33 Lower Shaft Seal & Bearing Case Cap BIRO B032A-361/34 Lower Shaft & Bearing Assembly B060R-300 Lower Shaft Key - Rear BMB523/578 Lower Main Bearing TIMKEN Bearings O.D. 2 3/8" B060F-300 Lower Shaft Key - Front B /34 Lower Shaft B057A-362/33 Lower Shaft Seal & Bearing Case Cap BMB523/578 Lower Main Bearing TIMKEN B Lower Shaft Nut B Lower Shaft Seal B /33 Lower Bearing Case Cap FITS MODEL NBS P/N OEM P/N DESCRIPTION 34 B / Lower Shaft X B032A-361/34 N/A Lower Shaft & Bearing Assembly X B Lower Shaft Seal X B057A-362/33 N/A Lower Shaft Seal & Bearing Case Cap X B / Lower Bearing Case Cap X B060F Lower Shaft Key - Front X B060R Lower Shaft Key - Rear X B Lower Shaft Nut X BMB523/ Lower Main Bearing X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

13 72 Lower Shaft Models 44, 55, 4436 B032A-361/44 Lower Shaft & Bearing Assembly - Front (4436 Short Side 12" Length) B057A-362/44 Lower Shaft Seal & Bearing Case Cap B060R-300 Lower Shaft Key - Rear BMB523/590 Lower Main Bearing TIMKEN BIRO B060F-300/44 Lower Shaft Key - Front B /44 Lower Shaft - Front 12" Length For the 3 wheel model 4436 this shaft will fit the lower FRONT wheel only. B057A-362/44 Lower Shaft Seal & Bearing Case Cap BMB523/590 Lower Main Bearing TIMKEN B /44 Lower Shaft Nut B /44 Lower Shaft Seal B /44 Lower Bearing Case Cap B205 Lower Shaft - Rear fits " Length For the 3 wheel model 4436 this shaft will fit the lower REAR wheel only. Same bearings as the front shaft above NBS P/N OEM P/N DESCRIPTION B / (18316) Lower Shaft -Front X X X B032A-361/44 A18227 Lower Shaft & Bearing Assembly (4436 Short Side 12 1/16") X X X B / (18231DL) Lower Shaft Seal X X X B057A-362/44 N/A Lower Shaft Seal & Bearing Case Cap X X X B / Lower Bearing Case Cap X X X B060F-300/ (18300) Lower Shaft Key - Front X X X B060R Lower Shaft Key - Rear X X X B / (252X) Lower Shaft Nut X X X B Lower Rear Shaft X X BMB523/ Lower Main Bearing X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

14 SAW GUIDE AND BLADE GUARD B155 Guide Bar Stop Stud BSGBN2233 Saw Guide Bearing 2 Neoprene Seals, Water Resistant B Saw Guide Bar Spring B223 Knob for Saw Guide Bar Lock Fits: 1433FH and 3334FH BSGB2233 Saw Guide Bearing Metal Shields Includes all shown.. Guide Bar, Stop stud, Bar Spring,Blade Guard,Finger Lift Bracket, Knob, Upper Guide Bracket and Saw Guide B030 0 Bearing Thumb Screw & Washer p/n Sticker Danger BIRO B074 Guide Bar p/n Sticker Danger Replacement Danger Sticker for all Guards Sticker Danger Replace- Danger Sticker for ment all B157 Finger Lift Fastener Bolt 3/8-16 B092 Blade Guard -33 and Stainless Steel B095 Blade Guard Stainless Steel B202 Finger Lift Bracket B Upper Guide & Carbide Block B Upper Guide Bracket B055A-601 Upper Guide & Bracket Assembly B240 Cleaning Unit and Finger Lift Fastener Knob 5/16-18, Black ABS Fits: 1433, 1433FH and 55 B211A Saw Guide Bar Assy Complete.. fits The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. B212A Saw Guide Bar Assy Complete.. fits B S Finger LIft Fastener Knob - Short 3/8-16 NBS P/N OEM P/N DESCRIPTION B S 291 Finger Lift Fastener Knob - Short X X X X X B S Bearing Thumb Screw & Washer X X X X X X X B Saw Guide Bar Spring X X X X X X X B Upper Guide & Carbide Block X X X X X X X X X B Upper Guide Bracket X X X X X X X X X B055A Upper Guide & Bracket Assembly X X X X X X X X X B Guide Bar X X X B Blade Guard X X B Blade Guard X B155 S200B1 Guide Bar Stop Stud X X X X X B D Finger Lift Fastener Bolt X X X X BSGB Saw Guide Bearing - Metal Shields X X X X BSGBN Saw Guide Bearing 2 Neoprene Seals, Water Resistant X X X X B Finger Lift Bracket X X X X X B211A A Saw Guide Bar Assy. Complete X B212A A Saw Guide Bar Assy. Complete X B Knob for Saw Guide Bar Lock - FIXED HEAD 1433 & 3334 ONLY X X B Q Fastener Knob, 5/16-18 Thd fits and 1433FH X X Order at:

15 74 B028A-415 Stationary Bar Assembly B V Lower Saw Guide Slot with " V" Front B Filler Block Nylon B Filler & Guide Stud B012A-128 Filler Clip Assembly B Stationary Bar BIRO B AA1 Filler Block B Saw Rider B086 Upper Saw Guide w/ Carbide Insert Stainless Steel B087 Lower Saw Guide w/ Carbide Insert Stainless Steel Fits Stationary Bar B088 Filler Block-Nylon FITS BIRO 44 SAWS FOR 1" WIDE BLADE B Thumb Guard B156 Wheel Cleaner - Fiber Fits Biro 44 with 1 wide blade NBS P/N OEM P/N DESCRIPTION AA FH FH 4436 B Filler Block X X X X X X X X X X X B AA1 177 Filler Block X B V 119 Lower Saw Guide Slot with " V" Front X X X X X X X X X B S Thumb Guard X X X X X X X X X X X B012A Filler Clip Assembly X B Saw Rider X X X X X X B Filler & Guide Stud X X X X X X X X X X B Stationary Bar X X X X X X X X B028A Stationary Bar Assembly X X X X X X X X B Upper Saw Guide w/ Carbide Insert X X X X B ZP Lower Saw Guide-Fits Stationary bar X X B S Filler Block-Nylon X X B Wheel Cleaner - Fiber X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

16 Fits all models B152A Meat Gauge Release Assy B162A Meat Gauge Plate Assy Includes Meat Gauge Releasee Assy, Nylon Slide B160 Meat Gauge Plate Stainless Steel B158 Meat Gauge Arm Includes Bushings BIRO B096 Meat Gauge Release Handle B093 Meat Gauge Cotter Key B204 Gauge Plate Bushing Large B203 Gauge Plate Bushing Small B Meat Gauge Spring B161 Meat Gauge Cap Nut B159 Nylon Slide B094 Meat Gauge Release Pin Fits 1433 & 1433FH B097 Meat Gauge Handle - includes roll pin B191 Meat Gauge Rack - Fits 1433 B151 Meat Gauge Worm Gear B166A Meat Gauge Plate Assy Complete-ready to install B165 Meanless at Gauge Plate Stai Steel STAINLESS B190 Meat Gauge Rack - Fits 22 B192 Meat Gauge Rack - Fits 3334 B193 Meat Gauge Rack - Fits 44 B161 Meat Gauge Cap Nut B164 Meat Gauge Arm includes Bushings B159 Nylon Slide NBS P/N OEM P/N DESCRIPTION FH FH B S265 Meat Gauge Spring X X X X X X X X X X B Meat Gauge Cotter Key X X X X X X X X X X B Meat Gauge Release Pin X X X X X X X X X X B096 S262 Meat Gauge Release Handle X X X X X X X X X X B Meat Gauge Handle X X X X X X X X X X B Meat Gauge Worm Gear X X X X X X X X X X B152A A262 Meat Gauge Release Assy X X X X X X X X X X B Meat Gauge Arm X X B159 HHS049NL Nylon Slide X X X X X X B160 S16275 Meat Gauge Plate X X B Meat Gauge Cap Nut X X X X X X X B162A AS16275 Meat Gauge Plate Assy X X B Meat Gauge Arm X X X X X B Meat Gauge Plate X X X X X B166A A14275 Meat Gauge Plate Assy X X X X X B Meat Gauge Rack Length 16" X B Meat Gauge Rack Length 16" X X B Meat Gauge Rack Length 20 1/2" X X B Meat Gauge Rack Length 25" X B203 Gauge Plate Bushing Small X X X X X B204 Gauge Plate Bushing Large X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

17 76 B217 Pusher Plate fits...11, 22, 33, 34, 44, 55, 1433, 1433fh, 3334, 3334fh, 4436 B Stop Lock Stud B Bowed Washer for Stop Lock Length B /14 Table Rod - 14 Length = 15" B /22 Table Rod - 22 Length = 12 3/4" B /33 Table Rod - 33 Length = 17" B Bumper 6-32 Thread B222 Table Stop -Fixed 6-32 BIRO B /44 Table Rod - 44 Length = 21" B146 Meat Carriage Guide Shim Set (10/pkg) B Swivel Stop B145 Meat Carriage Guide B Bumper 8-32 Thread 1/4" B Table Bearing (1 7/16" dia.) B Table Bearing (1 3/16" dia.) (.590" Dia.) 3/8" B066 Table Bearing (1 7/16" dia.) Stainless Steel B Bumper NBS P/N OEM P/N DESCRIPTION FH FH Bumper X X X X X X X 159 Table Bearing (1 3/16" dia.) X X X 159 Table Bearing (1 7/16" dia.) X X X X X X X 304 Stop Lock Stud X X X X X 311 Bumper X X 14212W Table Rod - 14 Length = 15" X Table Rod - 22 Length = 12 3/4" X Table Rod - 33 Length = 17" X X Table Rod - 44 Length = 21" X 309 Bowed Washer for Stop Lock X X X X X 200 (16200) Swivel Stop X X X X X 16159SS Table Bearing Stainless Steel X X X X X X X X 331 Table Bumper X X X X X X X X X A Meat Carriage Guide X X X B B B B B B /14 B /22 B /33 B /44 B B B066 B B145 B146 B217 B B Meat Carriage Guide Shim Set (10/pkg) X X X 256P Pusher Plate X X X X X X X X X X X Table Stop - Fixed X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

18 B048AC-290 Lower Cleaning Unit Assembly with Carbide Block B009A-295 Cleaning Arm Assy B Cleaner Arm Spring B Lower Cleaning Unit Casting B Wheel Cleaner Arm B Cleaner Arm Stud BIRO B030 Bearing Thumb Screw B024A-130/N Blade Scraper Bracket with Cleaners (Nyleen) B024A-130/S Blade Scraper Bracket with Cleaners (Steel) B024A-130/NS Blade Scraper Bracket with Cleaners (Nyleen and Steel) B048A-290 Lower Cleaning Unit Assy with Bearing B Saw Cleaner Bracket B027A-16 Lower Guide Bearing Bracket Assy B056A-603 Lower Back-up Bracket Assembly B S Blade Cleaner - Steel B Lower Guide Bearing Bracket BSGB2233 Saw Guide Bearing with Metal Shields 22, 33 BSGBN2233 Saw Guide Bearing - with 2 Neoprene Seals 22, 33, Water Resistant B Lower Carbide Block Bracket B N Blade Cleaner - Nyleen B Lower Carbide Block B Wheel Cleaner - Fiber B L Cleaning Unit Fastener Knob - Long 3/8-16 B156 Wheel Cleaner - Fiber Fits Biro 44 with 1 wide blade B144 Cleaner Bracket Holder Fits all except 1433 B030 Bearing Thumb Screw NBS P/N OEM P/N DESCRIPTION FH FH 4436 B N 131 Blade Cleaner - Nyleen X X X X X X X X X X X B S 131 Blade Cleaner - Steel X X X X X X X X X X X B Wheel Cleaner - Fiber X X X X X X X X X X X B Wheel Cleaner Arm X X X X X X X X X X B009A Cleaning Arm Assembly X X X X X X X X X X B Cleaner Arm Stud X X X X X X X X X X B Cleaner Arm Spring X X X X X X X X X X B Saw Cleaner Bracket X X X X X X X X B024A-130/N A130 Blade Scraper Bracket with Cleaners (Nyleen) X X X X X X X X B024A-130/NS A130 Blade Scraper Bracket with Cleaners (Nyleen and Steel) X X X X X X X X B024A-130/S A130 Blade Scraper Bracket with Cleaners (Steel) X X X X X X X X B L 291 Cleaning Unit Fastener Knob - Long X X X X X X B Lower Guide Bearing Bracket X X X B027A Lower Guide Bearing Bracket Assembly X X X B S Bearing Thumb Screw X X X B Lower Carbide Block X X X B Lower Cleaning Unit Casting X X X B048A Lower Cleaning Unit Assembly with Bearing X X X B048AC Lower Cleaning Unit Assembly with Carbide Block X X X B Lower Carbide Block Bracket X X X B056A-603 N/A Lower Back-up Bracket Assembly X X X B Cleaner Bracket Holder X X X X X X X B Wheel Cleaner - Fiber 1" Wide X X BSGB Saw Guide Bearing with Metal Shields X X X BSGBN Saw Guide Bearing with 2 Neoprene Seals, Water Resistant X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

19 78 CLEANING UNITS B L Cleaning Unit Fastener Knob - Long 3/8-16 B064AC-290ST Cleaning Unit Assembly, Complete with Carbide Block PLATED STEEL B ST Cleaning Unit Stamping PLATED STEEL B224 Cleaning Unit Stud B240 Cleaning Unit and Finger Lift Fastener Knob 5/16-18, Black ABS Fits: 1433, 1433FH and 55 B Lower Carbide Block B SGB 34,44 Saw Guide Bearing B030 Bearing Thumb Screw BIRO B037AC-16 Lower Carbide Block & Cleaner Holder Assembly with Steel Blade Cleaner B037AC-16/SN Lower Carbide Block & Cleaner Holder Assembly with Steel & Nyleen Blade Cleaners B037-16Z Guide Bearing & Cleaner Holder B009A-295 Cleaning Arm Assy B Wheel Cleaner - Fiber B Wheel Cleaner Arm B Cleaner Arm Spring B Cleaner Arm Stud B224 Cleaning Unit Stud B S Blade Cleaner - Steel B N Blade Cleaner - Nyleen B156 Wheel Cleaner - Fiber Fits Biro 44 with 1 wide blade NBS P/N OEM P/N DESCRIPTION B S 131 Blade Cleaner - Steel X X X X B N 131 Blade Cleaner - Nyleen X X X X B Wheel Cleaner - Fiber X X X X B Wheel Cleaner Arm X X X X B019A A295 Wheel Cleaner Assy - Stainless Steel X X X X B Cleaner Arm Stud X X X X B Cleaner Arm Spring X X X X B L 291 Cleaning Unit Fastener Knob - Long X X X B S Bearing Thumb Screw X X X B037-16Z 16 Guide Brearing And Cleaner Holder X X X B037AC Lower Carbide Block & Cleaner Assy with Steel Blade Cleaners X X X B037A-16/SN 16 Lower Carbide Block & Cleaner Assy with Steel and Nyleen Blade Cleaners X X X B ST 290 Cleaning Unit Stamping X X X B064AC-290ST 290 Cleaning Unit Assembly, Complete with Carbide Block X X X B Wheel Cleaner - Fiber 1" Wide X X B224 HHS035S Cleaning Unit Stud X X X B Q Fastener Knob, Cleaning Unit 5/16-18 Thread FITS ,1433FH and 55 X BSGB Saw Guide Bearing with 2 Neoprene Seals, Water Resistant X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

20 CLEANING UNITS STAINLESS STEEL B018AC Cleaning Unit Assembly Complete with Carbide Block STAINLESS STEEL B224 Cleaning Unit Stud B029AC Cleaning Unit Assembly Complete with Carbide Block STAINLESS STEEL B L Cleaning Unit Fastener Knob - Long 3/8-16 BIRO B018 Cleaning Unit Stamping STAINLESS STEEL B224 Cleaning Unit Stud B029 Cleaning Unit Stamping STAINLESS STEEL B030 Bearing Thumb Screw BSGB3444 Saw Guide Bearing B Lower Carbide Block B Cleaner Arm Spring B037-16Z Guide Bearing & Cleaner Holder B019A Wheel Cleaner Assy STAINLESS STEEL B019 Wheel Cleaner Arm - STAINLESS STEEL B Cleaner Arm Stud B037AC-16 Lower Carbide Block & Cleaner Holder Assembly with Steel Blade Cleaner B037AC-16/SN Lower Carbide Block & Cleaner Holder Assembly with Steel & Nyleen Blade Cleaners B224 Cleaning Unit Stud B S Blade Cleaner - Steel B N Blade Cleaner - Nyleen NBS P/N OEM P/N DESCRIPTION FH 4436 B S 131 Blade Cleaner - Steel X X X X X X X X B N 131 Blade Cleaner - Nylon X X X X X X X X B018 S16290 Cleaning Unit Stamping -SS X X B018AC AS Cleaning Unit Assy - W/ Carbide Block -SS X X B019 S295SS Wheel Cleaner Arm -SS X X X X X X X X B019A A295 Wheel Cleaner Assy -SS X X X X X X X X B Cleaner Arm Stud X X X B Cleaner Arm Spring X X X B L 291 Cleaning Unit Fastener Knob X X X X X X X X B029 S290 Cleaning Unit Stamping -SS X X X B029AC AS290 Cleaning Unit Assy - W/ Carbide Block - Stainless Steel X X X B S Bearing Thumb Screw X X X X X B037AC Lower Carbide Block & Cleaner Holder Assembly with Steel Blade Cleaners X X X X X B037AC-16/SN 16 Lower Carbide Block & Cleaner Holder Assembly with Steel & Nyleen X X X X X B037-16Z 16 Guide Bearing & Cleaner Holder X X X X X B Lower Carbide Block X X X X X B224 HHS035S Cleaning Unit Stud X X BSGB Saw Guide Bearing X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

21 80 BIRO RATCHET ARMS AND ASSEMBLIES B140 Tension Spring B141 Tension Spring Gauge B149 Tension Spring B139 Tension Spring Pin B098 Tension Pin Cap FITS BIRO 11, 22, 33, 34, 1433, 3334 SAWS B154 Tension Pin Cap B150 Tension Spring Pin B075 Tension Spring Plate B136A Ratchet Arm Assembly Complete as shown B213 Tension Spring Plate BIRO B215 Ratchet Base Mounting Hardware B062 Ratchet Arm Stud B131 Ratchet Base B Rachet Trigger B147A Ratchet Arm Assembly Complete as shown FITS BIRO 44 SAWS B040 Jam Nut with Nylon Insert B Rachet Trigger Spring B130 Ratchet Arm with Trigger & Spring Length =13 1/2" B Ratchet Arm Stud B040 Jam Nut w/nylon Insert B187 Ratchet Base Fits 44 B188 Ratchet Arm with Trigger & Spring Fits 44 Length = 16" NBS P/N OEM P/N DESCRIPTION FH FH 4436 B040 HN35S Jam Nut with Nylon Insert X X X X X X X B Ratchet Trigger X X X X X X X X B Ratchet Trigger Spring X X X X X X X X B062 S18189 Ratchet Arm Stud X B Rachet Arm Stud X X X X X X B Tension Spring Plate X X B Tension Pin Cap X X X X X X B Ratchet Arm X X X X X X B131 S19 Ratchet Base X X X X X X B136A A19 Rachet Arm Assembly Complete X X X X X X B Tension Spring Pin X X X X X X B Tension Spring X X X X X X B Tension Spring Gauge X X X X X X B147A A18019 Ratchet Arm Assembly Complete X B Tension Spring X B Tension Spring Pin -w/ Plastic Cap X B Tension Pin Cap X B Ratchet Base X B Ratchet Arm X X B Tension Spring Plate X X B215 19CB Ratchet Base Mounting Hardware X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

22 BIRO SLIDE GIBBS, DOOR LATCH/HINGES AND LEGS B184* Slide Gibb fits.. 44, 4436 B185* Slide Gibb fits.. 11, 22, 33, 34, 1433, 3334 B206 Door Latch FOOT NOT AVAILABLE FROM NBS BIRO B186 Grease Fitting *The saw require 2 slide gibbs. The slide gibbs are universal and designed to just be reversed in direction when installing on the saw. B Door Hinge 2 Pieces Shown B035-14, 14A Door Hinge 2 Pieces Shown 1 11/32" DIA B073A Drive-In Leveling Leg NBS P/N OEM P/N DESCRIPTION FH FH 4436 B035-14, 14A 14 Door Hinge X X X X X B A16014 Door Hinge X B073A B30 Drive-In Leveling Leg X X X B Slide Gibb X B Slide Gibb X X X X X X B Grease Fitting X X X X X X B Door Latch X X X X X *This Bone Dust Pan can be used also on the Biro 34 Saw's. There might need to be a slight reduction of the side lip but it will fit. BIRO SAW BONE DUST PANS B * Bone Dust Pan ½" x 10" x 7" B Bone Dust Pan /4" x 121/4" x 7" NBS P/N OEM P/N DESCRIPTION B * Bone Dust Pan ½" x 10" x 7" X X B Bone Dust Pan ¼" x 12¼" x 7" X The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

23 82 BRKFW Biro Repair Kit All Models B N (Nyleen) Blade Cleaner B Filler - Nylon Block B Wheel Cleaner - Fiber B S (Steel) Blade Cleaner BRK-1 Biro Repair Kit Models 11, 22, & 33 (With Bearings) BIRO BSGB2233 Saw Guide Bearing B V Lower Saw Guide B030 Bearing Thumb Screw & Washer B Filler & Guide Stud B Bumper B N (Nyleen) Blade Cleaner B Filler Block - Nylon B Wheel Cleaner - Fiber B S (Steel) Blade Cleaner BRK-2 Biro Repair Kit Models 11, 22, 33, 1433, 1433FH, 3334, 3334FH (With Carbide) B Upper Guide & Carbide Block B Bumper B V Lower Saw Guide B Filler & Guide Stud B N (Nyleen) Blade Cleaner B Filler Block - Nylon B Wheel Cleaner - Fiber B S (Steel) Blade Cleaner The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

24 BRK-4 Biro Repair Kit Models 34, 44 & 4436 (With Carbide) B Upper Guide & Carbide Block B Filler & Guide Stud B Bumper BIRO B V Lower Saw Guide B N (Nyleen) Blade Cleaner B Filler Block - Nylon B Wheel Cleaner - Fiber B S (Steel) Blade Cleaner BRK-5 Hardware Kit Biro Saws Kit consists of 151 STAINLESS STEEL nuts, bolts, screws and washers in a break resistant plastic container. QTY DESCRIPTION 10 1/4-20 x 3/8 HEX HEAD, CAP SCREW x 7/8 FILLISTER, PHILLIPS SCREW x 1 ROUND HEAD, PHILLIPS MACHINE SCREW x 1/2 ROUND HEAD, PHILLIPS MACHINE SCREW x 1/4 ROUND HEAD, PHILLIPS MACHINE SCREW 20 1/4-20 HEX NUT HEX NUT 10 1/4 FLAT WASHER 5 3/8 FLAT WASHER 20 6/32 HEX NUT 20 8/32 HEX NUT The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

25 84 SAW GUIDE BEARINGS Neoprene Seals Metal Shields (Water Resistant) Metal Shields ID 15/32" ID 15/32" ID 11/16" OD 1 1/4" OD 1 1/4" OD 1 9/16" MODEL # NBS # BSGB2233 NBS # BSGBN2233 NBS # BSGB X X 22 X X 33 X X 33 NEW X X 34 X 34 NEW X 3334 X X 3334 NEW X X 44 X 4436 X BIRO UPPER MAIN BEARING ID Approx 1" ID 1" ID 1 1/8" OD Approx 2 1/16" OD 2 3/8" OD 2 3/8" MODEL # NBS # BMB100/204 NBS # BMB523/578 NBS # BMB523/ X 22 X 33 X 33 NEW X 34 X 34 NEW X 3334 X 3334 NEW X 44 X 4436 X LOWER MAIN BEARING ID Approx 1" ID 1" ID 1 1/8" OD Approx 2 1/16" OD 2 3/8" OD 2 3/8" MODEL # NBS # BMB100/204 NBS # BMB523/578 NBS # BMB523/ X 22 X 33 X 33 NEW X 34 X 34 NEW X 3334 X 3334 NEW X 44 X 4436 X We only use TIMKEN Bearings for our Tapered Roller Bearing applications! The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment.

26 For more parts, Specials, Sales, Discounts and Promotions! Check your order, item history and track your packages BIRO COUPON CODE: SAW15 Save 15% off entire purchase of saw parts at One time use per account Valid 1/2018 to 12/31/18 nationalbandsaw nbsparts.com/blog nationalbandsaw nationalbandsaw NOTES: The above described parts are supplied by National Band Saw Company as replacement parts for Biro equipment. Order at:

27 86 WHEELS, SHAFT & WHEEL ASSEMBLIES (OLD STYLE) TENSION HANDLE ON TOP "OLD" B16- Tension Handle located on top of Upper Wheel "NEW" B16- B16F MFG after 1990 Tension Handle located below Upper Wheel UPPER WHEEL (NEW STYLE) TENSION HANDLE BELOW SAW SHAFT & BEARING WHEEL WHEEL WHEEL ASSEMBLY* *WHEEL ASSEMBLY MODEL # ASSEMBLY ONLY DIAMETER WITH HANGER B12 BB019A-7 BB105U 12" BB107A BB108AH-12 (OLD STYLE) B14 BB019A-7 BB " BB082A-149 BB085AH-14 (OLD STYLE) B16 BB019A-7 BB " BB080A-169 BB086AH-16 (OLD) / BB103AH-16 (NEW) B16 -LEFT HAND BB019A-7 BB194-LH 16" BB196A-LH BB210A-LH 1435 BB019A-7 BB " BB082A-149 BB085AH-14 (OLD STYLE) 1640 BB019A-7 BB " BB080A-169 BB103AH-16 (NEW STYLE) COBRA 14 BB019A-7 BB " BB082A-149 BB085AH-14 (OLD STYLE) COBRA 16 BB019A-7 BB " BB080A-169 BB103AH-16 (NEW STYLE) SA20 BB019A-7 BB113U 20 1/2" BB109A BB165A SA20 -LEFT HAND BB019A-7 BB206-LH 20 1/2" BB207A-LH BB208A-LH LH = LEFT HANDED fits.. LEFT HANDED SAW ONLY * Complete with Wheel, Shaft, Bearings, Seal, Gaskets, Spacer, Hub Cap & Retainer BUTCHER BOY HANGER ASSEMBLIES BB102A Upper Wheel Hanger - New Style (Complete with Tension Gauge Indicator, Spring & Cleaner Arm Assembly) BB164A Upper Wheel Hanger Assy (Complete with Tension Gauge Indicator, Spring & Cleaner Arm Assembly) Fits SA20 BB111 Wheel Adjusting Screw & Nut BB101A Tension Adjusting Screw & Handle Assembly N/S B16 BB102A fits... Wheel: B16 - BB103AH BB103AH-16 COBRA 16 - BB103AH-16 BB164A fits... SA20 SA20 LH Wheel - BB165A - BB208A-LH BB087A-18 B16 Tension Hanger Assembly BB088A-18 B14 Tension Hanger Assembly BB089A-18 B12 Tension Hanger Assembly fits... B16 Wheel -BB086AH-16 fits... B14, COBRA 14, 1640 BB085AH-14 fits... B12 Wheel -BB108AH-12 "OLD" B16- Tension Handle located on top of Upper Wheel "NEW" B16- Tension Handle located below Upper Wheel The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

28 87 National Band Saw, Established1953 Don't forget Saw Blades LOWER WHEELS Butcher Boy - Royal " Butcher Boy - Junior " Butcher Boy - Senior " Butcher Boy - B " Butcher Boy - B14, Cobra " Butcher Boy - B16, SA16, Cobra " Butcher Boy - SA " BUTCHER BOY SAW SHAFT & BEARING MAIN BEARING HOUSING WHEEL ONLY WHEEL MODEL # ASSEMBLY ASSEMBLY DIAMETER B12 BB020A-23 BB123A BB106L 12" B14 BB020A-23 BB123A BB " B16 BB020A-23 BB123A BB " B16 -LEFT HAND BB020A-23 BB123A BB195-LH 16" 1435 BB020A-23 BB123A BB " 1640 BB020A-23 BB123A BB " COBRA 14 BB020A-23 BB123A BB " COBRA 16 BB020A-23 BB123A BB " SA20 BB020A-23 BB181A BB114L 20 1/2" SA20 -LEFT HAND BB020A-23 BB181A BB209-LH 20 1/2" LOWER WHEEL BEARING HOUSING ASSEMBLIES LH = LEFT HANDED fits.. LEFT HANDED SAW ONLY BB123A Fits...Butcher Boy: B12, B14, B16, 1435, 1640, COBRA 14, COBRA 16 BB181A Fits... Butcher Boy SA20 BB163 Grease Fitting BB163 Grease Fitting BB123A Lower Main Bearing Housing Assembly - Includes Bearings, Shaft, Grease, Retaining Rings, Seal, Nut, Washer & Square Key BB181A Lower Main Bearing Housing Assembly - Includes Bearings, Shaft, Grease, Retaining Rings, Seal, Nut, Washer & Square Key BB126 Bearing Retainer Ring BB124 Lower Main Bearing Housing w/ Grease Fitting BB126 Bearing Retainer Ring BB180 Lower Main Bearing Housing w/ Grease Fitting COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB123A Lower Main Bearing Housing Assembly X X X X X X X BB124 (22A) Lower Main Bearing Housing X X X X X X X BB126 (41B) Bearing Retainer Ring X X X X X X X X BB163 Grease Fitting X X X X X X X X BB Lower Main Bearing Housing X BB181A Lower Main Bearing Housing Assembly X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

29 88 UPPER SHAFT The bearings are a slip fit onto the shaft. The shaft assembly is a press fit into the upper wheel. BB019A-7 Upper Shaft & Bearing Assembly with Metal Shields BB063-23A Upper & Lower Shaft Nut & Washer BB019A-7/N Upper Shaft & Bearing Assembly with 1 Neoprene Seal BB077-41A Upper Wheel Bearing Retainer BUTCHER BOY BB052-41D Upper & Lower Shaft Seal BB049-6A Upper Bearing Spacer BBUMB Upper Main Bearing with 1 Metal Shield BB019-7 Upper Wheel Shaft The upper shaft includes the Nut & Washer BB Hub Cap BB051-41C Shaft Gasket BBUMB Upper Main Bearing with 1 Metal Shield BBUMBN1 Upper Main Bearing with 1 Neoprene Seal BBUMBN1 Upper Main Bearing with 1 Neoprene Seal BBUMBN2 Upper Main Bearing with 2 Neoprene Seals BBUMBN2 Upper Main Bearing with 2 Neoprene Seals BB211 Upper Main Bearing - Premium with 2 Neoprene Seals, High Temp High Use COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB / Upper Wheel Shaft X X X X X X X X BB019A Upper Shaft & Bearing Assembly with Metal Shields X X X X X X X X BB019A-7/N Upper Shaft & Bearing Assembly with Neoprene Seals X X X X X X X X BB049-6A (6A) Upper Bearing Spacer X X X X X X X X BB051-41C (41C) Shaft Gasket X X X X X X X X BB052-41D (41D) Upper & Lower Shaft Seal X X X X X X X X BB063-23A Upper & Lower Shaft Nut & Washer X X X X X X X X BB077-41A (41A) Upper Wheel Bearing Retainer X X X X X X X X BB (41C) Hub Cap X X X X X X X X BBUMB (6) Upper Main Bearing with 1 Metal Shield X X X X X X X X BBUMBN1 (6) Upper Main Bearing with 1 Neoprene Seal X X X X X X X X BBUMBN2 (6) Upper Main Bearing with 2 Neoprene Seals X X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

30 89 National Band Saw, Established1953 LOWER SHAFT and LOWER HUB ASSEMBLIES BB059-23B Lower Shaft Key BUTCHER BOY BB212 Lower Main Bearing - Premium with 2 Neoprene Seals, High Temp High Use BB125 Bearing Retainer Plate BB052-41D Upper & Lower Shaft Seal BBLMB Lower Main Bearing with 1 Metal Shield BBLMBN1 Lower Main Bearing with 1 Neoprene Seal BBLMBN2 Lower Main Bearing with 2 Neoprene Seals BB Lower Wheel Shaft BB060-24C Lower Shaft Snap Ring BB060-24C Lower Shaft Snap Ring BBLMB Lower Main Bearing with 1 Metal Shield BBLMBN1 Lower Main Bearing with 1 Neoprene Seal BBLMBN2 Lower Main Bearing with 2 Neoprene Seals BB212 Lower Main Bearing - Premium with 2 Neoprene Seals, High Temp High Use The BB020A-23 shaft assembly works in both the BB123A and BB181A, found below BB063-23A Upper & Lower Shaft Nut & Washer BB020A-23 Lower Shaft & Bearing Assembly with Metal Shields BB020A-23/N Lower Shaft & Bearing Assembly with 1 Neoprene Seal BB020A-23/2RS Lower Shaft & Bearing Assembly with 2 Neoprene Seals BB123A Lower Main Bearing Housing Assembly - Includes Bearings, Shaft, Grease, Retaining Rings, Seal, Nut, Washer & Square Key. Fits: B12, 14, 16, 1435, 1640, Cobra 14 & 16 BB181A Lower Main Bearing Housing Assembly - Includes Bearings, Shaft, Grease, Retaining Rings, Seal, Nut, Washer & Square Key Fits: SA20 COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB (23) Lower Wheel Shaft X X X X X X X X BB020A Lower Shaft & Bearing Assembly with Metal Shields X X X X X X X X BB020A-23/N (23) Lower Shaft & Bearing Assembly with 1 Neoprene Seal X X X X X X X X BB020A-23/2RS (23) Lower Shaft & Bearing Assembly with 2 Neoprene Seals X X X X X X X X BB052-41D (41D) Upper & Lower Shaft Seal X X X X X X X X BB059-23B (23B) Lower Shaft Key X X X X X X X X BB060-24C (24C) Lower Shaft Snap Ring X X X X X X X X BB063-23A Upper & Lower Shaft Nut & Washer X X X X X X X X BB125 (41E) Bearing Retainer Plate X X X X X X X X BBLMB (24) Lower Main Bearing with 1 Metal Shield X X X X X X X X BBLMBN1 (6) Lower Main Bearing with 1 Neoprene Seal X X X X X X X X BBLMBN2 (6) Lower Main Bearing with 2 Neoprene Seals X X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

31 90 BUTCHER BOY SAW HANGER AND TENSION ASSEMBLIES BB112 Threaded Sleevee BBX100 Threaded Sleevee Extractor Tool BB075-31E Tension Gauge Spring Often the threaded sleeve becomes frozen in the saw and is difficult to remove. Using a 3/4" socket, this tool is threaded into existing threaded sleeve and it will bottom out and turn out the threaded insert. BB205 Gauge Block fits s, 1640S Cobra 14/16 BB102A Upper Wheel Hanger - New Style (Complete with Tension Gauge Indicator, Spring & Cleaner Arm Assembly) BB164A Upper Wheel Hanger Assy (Complete with Tension Gauge Indicator, Spring & Cleaner Arm Assembly) Fits SA20 BB111 Wheel Adjusting Screw & Nut BB132 Tension Gauge Pin - N/S BB203 Upper Wheel Hanger Includes Tension pin and Set Screw. No Scraper Arm BB104 Upper Wheel Scraper Arm L= 8 5/8" BB162 Upper Wheel Scraper Arm L=10 5/8" Fits SA20 BUTCHER BOY BB110 Tension Gauge Indicator BB136 Tension Gauge Spring & Pin Kit BB134 Tension Adjusting Screw BB101A Tension Adjusting Screw & Handle Assembly N/S B16 BB040A Wheel Scraper Assy with Fiber 5/8" BB135 Tension Handle "NEW" B16- Tension Handle located below Upper Wheel BB Wheel Scraper - Fiber BB Wheel Scraper Spring COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB (33) Wheel Scraper - Fiber X X NEW X X X X X BB Slide Plate X BB040A Wheel Scraper Assy - Fiber X X X X X X X X BB075-31E (31E) Tension Gauge Spring X X NEW X X X X X BB101A Tension Adjusting Screw & Handle Assembly NEW X X X BB102A Upper Wheel Hanger - New Style NEW X X X BB104 (34) Upper Wheel Scraper Arm NEW X X X BB110 (31H) Tension Gauge Indicator NEW X X X X BB111 (35A) Wheel Adjusting Screw & Nut NEW X X X BB112 (31K) Threaded Sleeve NEW X X X X BB132 (31G) Tension Gauge Pin - N/S NEW X X X BB134 (31J) Tension Adjusting Screw NEW X X X BB135 (30C) Tension Handle NEW X X X X BB136 (31F) Tension Gauge Spring & Pin Kit NEW X X X X BB Upper Wheel Scraper Arm X BB164A Upper Wheel Hanger Assy X BB Upper Wheel Hanger Body Only w/tension Pin NEW X X X BB / 1662 Gauge Block - Cobra X X X X BBX100 Threaded Sleeve Extractor Tool X X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

32 91 National Band Saw, Established1953 BUTCHER BOY SAW HANGER ASSEMBLY - OLD STYLE "OLD" B16- Tension Handle located on top of Upper Wheel BB087A-18 B16 Tension Hanger Assembly BB014-30A Tension Handle BB073-31A Tension Gauge Housing BUTCHER BOY BB088A-18 B14 Tension Hanger Assembly BB089A-18 B12 Tension Hanger Assembly BB040A Wheel Scraper Assy Fiber 5/8" BB075-31E Tension Gauge Spring B12 7" B14 8" B16 9" BB074-31C/12 Rod & Indicator Assembly BB074-31C/14 Rod & Indicator Assembly BB074-31C/16 Rod & Indicator Assembly BB Wheel Scraper - Fiber BB Wheel Scraper Spring BB076-31D Tension Gauge Pin BB071-8A Upper Wheel Hanger BB153L Guide Block -Left Hand BB154R BB036 Slide Plate BB Adjusting Screw & Nut B12 6 1/4" B14 7 1/2" B16 8 3/4" BB048-34/12 Upper Wheel Scraper Arm - B12 BB048-34/14 Upper Wheel Scraper Arm - B14 BB048-34/16 Upper Wheel Scraper Arm - B16 Guide Block -Right Hand COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB (33) Wheel Scraper - Fiber X X OLD X X X X BB014-30A (30A) Tension Handle X X OLD X X BB Slide Plate NEW BB (59) Wheel Scraper Spring X X OLD X X X X BB040A Wheel Scraper Assy - Fiber X X X X X X X BB048-34/12 (34) Upper Wheel Scraper Arm - B12 X BB048-34/14 (34) Upper Wheel Scraper Arm - B14 X X X BB048-34/16 (34) Upper Wheel Scraper Arm - B16 OLD BB (35) Adjusting Screw & Nut X X X BB071-8A (8A) Upper Wheel Hanger X X OLD X X BB073-31A (31A) Tension Gauge Housing X X OLD X X BB074-31C/12 (31C) Rod & Indicator Assembly X BB074-31C/14 (31C) Rod & Indicator Assembly X X X BB074-31C/16 (31C) Rod & Indicator Assembly OLD BB075-31E (31E) Tension Gauge Spring X X X X X X X BB076-31D (31D) Tension Gauge Pin X X OLD X X X X BB087A-18 (18A) B16 Tension Hanger Assembly OLD BB088A-18 (18) B14 Tension Hanger Assembly X X X BB089A-18 (18) B12 Tension Hanger Assembly X BB153L Guide Block - Left Hand X X NEW X X X X X BB154R Guide Block - Right Hand X X NEW X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

33 92 BUTCHER BOY SA20 TENSION HANGER AND BLADE GUARD BB164A Tension Wheel Hanger Assy BB162 Wheel Scraper Arm L= 10 5/8" BB204 Tension Spindle Guide fits...sa20 p/n Sticker Danger BB075-31E Tension Gauge Spring BB145 Tension Gauge Spindle Sleeve BB144 Tension Gauge Spindle BB040A Wheel Scraper Assy Fiber 5/8" BB Wheel Scraper - Fiber BB201 Thrust Washer fits...sa20 BB193A Handle & Spindle with Sleve fits...sa20 BB192A Handle & Spindle fits...sa20 Replacement Danger Sticke er for all Guards. Universal, Can be used for other applications 10 5/16" BB084 Guard Extension BUTCHER BOY BB135 Tension Gauge Handle BB136 Tension Gauge Spring & Pin Kit FITS MODEL NBS P/N OEM P/N DESCRIPTION SA20 BB001A-20A/L (20A) FH55-14 Threaded Stud X BB002-21V (21) Lower Saw Guide with "V" Front X BB002-21VC Lower Saw Guide with Carbide Insert X BB Wheel Scraper Assy X BB027 (90B) Extension Stop X BB040A Wheel Scraper Assy X BB075-31E (31E 10082) Tension Gauge Spring X BB Guard Extension X BB095-14A (39) Adjusting Bar Guide w/spindle Lock X BB133 (90C) Blade Guide Knob X BB135 (30) Tension Gauge Handle X BB136 (31F) Tension Gauge Spring & Pin Kit X BB144 (14A) Tension Gauge Spindle X BB145 (15A) Tension Gauge Spindle Sleeve X BB150 (37A) Blade Support Adjusting Bar X BB151 (128) Blade Guide Holder X BB152 (131) Hand Grip Round Nut X BB Tension Wheel Scraper Arm X BB164A Upper Wheel Hanger Assy X BB192A Handle & Spindle Assembly - SA20 X BB193A Handle & Spindle w/sleeve Assembly - SA20 X BB Thrust Washer X BB Tension Sprindle Guide X BB133 Blade Guard Knob BB095-14A Adjusting Bar Guide w/spindle Lock BB001A-20A/L Threaded Stud BB027 Extension Stop BB002-21V Lower Saw Guide with "V" Front BB068 Blade Guard Assy BB150 Blade Support Adjusting Bar 21 1/4" Long BB152 Hand Grip Round Nut BB151 Blade Guide Holder BB002-21VC Lower Saw Guide with Carbide Insert The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

34 93 National Band Saw, Established1953 BUTCHER BOY SA20 GAUGE PLATE AND GUIDE BLOCKS BB143 Thickness Gauge Slide Rod 7/8" x 23" BUTCHER BOY BB069 Gauge Plate Nuts & Lock Washers (4/pkg) BB141A Thickness Gauge Assembly BB142 Thickness Gauge Ratchet Lock BB137 Thickness Gauge Plate BB199 Bushing Thickness Gauge Arm SA20 BB140 Thickness Gauge Handwheel BB138 Thickness Gauge Housing BB153L Guide Block -Left Hand BB154RB154R Guide Block -Right Hand BB139 Thickness Gauge Spindle BB200 Bushing Thickness Gauge Arm Bracket SA20 BB001SA-2069 Filler Block - Nylon fits..sa20 Don't forget to pick up some spare Bone-In cutting blades. Butcher Boy - SA20...SB154" found on page 60 or 61 FITS MODEL NBS P/N OEM P/N DESCRIPTION SA20 BB001SA Filler Block - Nylon X BB069 N/A Gauge Plate Nuts & Lock Washers (4/pkg) X BB137 (50C) Thickness Gauge Plate, Right Hand X BB138 (050B) Thickness Gauge Housing, Right Hand X BB139 (52A) Thickness Gauge Spindle X BB140 (51A) Thickness Gauge Handwheel X BB141A (137) Thickness Gauge Assembly, Right Hand X BB142 (54A) Thickness Gauge Ratchet Lock X BB143 (56A) Thickness Gauge Slide Rod X BB153L Guide Block - Left Hand X BB154R Guide Block - Right Hand X BB Bushing, Thickness Gauge Arm (Right Hand) X BB Bushing, Thickness Gauge Arm Bracket X Boneless Cutting Blades SA20...BK154 found on page 60 OR 61 The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

35 94 FITS SA30 - SA36 BB156 Upper Main Bearing BB197 Seal - Upper Shaft fits SA30, SA36 BB198 Retaining Ring - Lower Shaft Assembly fits SA30, SA36 BB155 Upper Shaft BB156 Upper Main Bearing BB170 Key BB159 Lower Main Bearing (Ball) Rear BB166 Lower Shaft Seal fits SA30, SA36 BUTCHER BOY BB169 Woodruff Key BB157 Lower Shaft BB161 Roller Table Bearing BB158 Lower Main Bearing (Roller) Front BB166 Lower Shaft Seal BB079 Guide Block BB067 Wheel Scraper - Fiber Upper & Lower Wheel BB168 Wheel Nut w/ Set Screws BB093 Lower Guide with Pin BB001A-20A/S Filler Stud NBS P/N OEM P/N DESCRIPTION SA30 SA36 BB001A-20A/S (15B) FHSS N Filler Stud X X BB Wheel Scraper - Fiber Upper & Lower Wheel X X BB Guide Block X X BB Lower Guide with Pin X X BB155 (23) Upper Shaft X X BB156 (31) Upper Main Bearing X X BB157 (4) Lower Shaft X X BB158 (2) Lower Main Bearing (Roller) Front X X BB159 (2A) Lower Main Bearing (Ball) Rear X X BB161 (79B) Roller Table Bearing X X BB Lower Shaft Seal X X BB Wheel Nut X X BB Woodruff Key X X BB Key X X BB Seal, Upper Shaft X X BB Retaining Ring - Lower Shaft Assembly X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

36 95 National Band Saw, Established1953 FITS and Cobra BB069 Gauge Plate Nuts & Lock Washers (4/pkg) BUTCHER BOY BB033-61C Thickness Gauge Ratchet Lock BB022 Short Cut Plate BB117A-12 Gauge Rod - New Style Length = 14 3/4" BB116A-14 Gauge Rod - New Style Length = 17 3/8" BB115A-16 Gauge Rod - New Style Length = 19 1/2" BB030-69A Rod Liner Pin HARDWARE INCLUDED BB129 Gauge Plate BB Gauge Roller BB011-62B Gauge Bushing BB End Catch (Gauge Arm Support) BB031-69B Rod Mount & Locking Pin BB032-69/12 Gauge Rod - B12 Length = 14 3/4" BB032-69/14 Gauge Rod - B14 Length = 17 3/16" BB032-69/16 Gauge Rod - B16 Length = 19 3/16" HARDWARE NOT INCLUDED BB130 Gauge Housing BB061-63B Measuring Arm Lock Stud NBS P/N OEM P/N DESCRIPTION B12 B14 B BB (68) End Catch (Gauge Arm Support) X X X X X X X BB011-62B (62B) Gauge Bushing X X X X X X X BB022 (47) Short Cut Plate X X X X X X X BB030-69A 69A Rod Liner Pin X X X BB031-69B Rod Mount & Locking Pin X X X BB032-69/12 (69) Gauge Rod - B12 X BB032-69/14 (69) Gauge Rod - B14 X BB032-69/16 (69) Gauge Rod - B16 X BB033-61C (61C) Thickness Gauge Ratchet Lock X X X X X X X BB (60B) Gauge Roller X X X X X X X BB (62A) Gauge Spindle & Arm Assy X X X X X X X BB057-61A (61A) Measuring Arm Spring X X X X X X X BB058-61B (61B) Measuring Arm Pin X X X X X X X BB061-63B (63B) Measuring Arm Lock Stud X X X X X X X BB069 N/A Gauge Plate Nuts & Lock Washers (4/pkg) X X X X X X X BB (63) Gauge Lock Knob X X X X X X X BB115A Gauge Rod - New Style X X BB116A Gauge Rod - New Style X X BB117A Gauge Rod - New Style X BB128A/16 (16) Thickness Gauge Assy X X X X X X X BB129 (60) Gauge Plate X X X X X X X BB130 (61) Gauge Housing X X X X X X X BB131 (64A) Gauge Hand Wheel X X X X X X X BB128A/16 Thickness Gauge-Assembly BB Gauge Spindle & Arm Assy BB057-61A Measuring Arm Spring BB058-61B Measuring Arm Pin BB Gauge Lock Knob COBRA BB131 Gauge Hand Wheel The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

37 96 ADJUSTING BAR GUIDES BB047-38A/12 Blade Support Adjusting Bar - B12 Length = 14 1/4" BB047-38A/14 Blade Support Adjusting Bar - B14 Length = 16 1/4" BB095-14A Adjusting Bar Guide with Spring Lock BB047-38A/16 Blade Support Adjusting Bar - B16 Length = 18 1/2" r p/n Sticker Danger BB Adjusting Guide & Roller Mount BB001A-20A/L Threaded Stud BB096-37A Adjusting Bar Guide Knob BBSGBN Saw Guide Bearing with Neoprene Seals BUTCHER BOY BB099A-14 Adjusting Bar Guide Assembly Complete with Guide & Roller Mount Assembly Bar Length = 18 1/2" BBSGB Saw Guide Bearing with Metal Shields Replacement Danger Sticker for all Guards. Universal, Can be used for other applications 10 5/16" BB094 Screw Attaches blade guard to roller mount BB084 Guard Extension BB003-53V Upper Saw Guide with "V" Front BB029-52AB029 Bearing Thumb Screw BB027 Extension Stop BB133 Blade Guard Knob BB Blade Guard COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB001A-20AL (20A)FH N Threaded Stud X X X X X X BB003-53V (53) Upper Saw Guide with "V" Front X X X BB (39) Blade Guard X X X BB027 (90B) Extension Stop X X X X X X X X BB029-52A (52A) Bearing Thumb Screw X X X BB (40) Adjusting Guide & Roller Mount X X X X BB047-38A/12 (38A) Blade Support Adjusting Bar - B12 X BB047-38A/14 (38A) Blade Support Adjusting Bar - B14 X BB047-38A/16 (38A) Blade Support Adjusting Bar - B16 X BB Guard Extension X X X BB094 (39A) Screw X X X BB095-14A (14A) Adjusting Bar Guide with Spring Lock X X X X BB096-37A (37A) Adjusting Bar Guide Knob X X X X BB099A-14 (90) Adjusting Bar Guide Assembly X X X X BB133 (90C) Blade Guard Knob X X X X X X X X BBSGB (52) Saw Guide Bearing with Metal Shields X X X BBSGBN (52) Saw Guide Bearing with Neoprene Seals X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

38 97 National Band Saw, Established1953 BUTCHER BOY FRONT BLADE AND WHEEL SCRAPER BB001A-20A/L Scraper Mount Stud - Long 1" BB001A-20A/S Filler Stud - Short 3/4" BB042-65H Blade Roller & Scraper Mount BUTCHER BOY BBSGBN Saw Guide Bearing with Neoprene Seals BBSGB Saw Guide Bearing BB029-52A Bearing Thumb Screw BB041A-66F Blade Scraper Holder Assembly - Fiber BB041A-66S Blade Scraper Holder Assembly - Steel BB Wheel Scraper - Fiber BB Wheel Scraper Spring BB042A-15A Front Scraper Assembly BB040A Wheel Scraper Assy with Fiber Scraper 5/8" BB002-21V Lower Saw Guide with "V" Front BB Blade Scraper Holder Assembly - No Scrapers BB006-73F Blade Scraper - Fiber BB006-73S Blade Scraper - Steel BB002-21VC Lower Saw Guide with "V" front and Carbide Insert BB Filler Block - Nylon BB118 Filler Block - Fiber COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB (20) Filler Block - Nylon X X X X X X X BB001A-20A/L (15B) FHSS N Scraper Mount Stud - Long X X X X X X X BB001A-20A/S (20A) FHSS N Filler Stud - Short X X X X X X X BB002-21V (21) Lower Saw Guide with "V" Front X X X X X X X X BB002-21VC Lower Saw Guide with Carbide Insert X X X X X X X X BB (33) Wheel Scraper - Fiber X X X X X X X X BB006-73F (73F) Blade Scraper - Fiber X X X X X X X X BB006-73S (73S) Blade Scraper - Steel X X X X X X X X BB029-52A (52A) Bearing Thumb Screw X X X X X X X BB (59) Wheel Scraper Spring X X X X X X X X BB040A Wheel Scraper Assembly, with Fiber Scraper 5/8" X X X X X X X X BB Blade Scraper Holder Only, No Scrapers X X X X X X X X BB041A-66F (66F) 10464F Blade Scraper Holder Assembly - Fiber X X X X X X X X BB041A-66S (66S) 10464S Blade Scraper Holder Assembly - Steel X X X X X X X X BB042-65H (65H) Blade Roller & Scraper Mount - New Style X X X X X X X BB042A-15A (15A) Front Scraper Assembly - New Style X X X X X X X BB062-65D (65D) Deflector X X X X X X X BB118 (20) Filler Block - Fiber X X X X X X X BBSGB (27) Saw Guide Bearing with Metal Shields X X X X X X X BBSGBN (27) Saw Guide Bearing with Neoprene Seals X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. BB062-65D Deflector Order at:

39 98 SAW GUIDES AND FILLER BLOCKS and SCRAPERS BB003-53VC Upper Saw Guide w/ Carbide Insert BB044-67A Rear Blade & Wheel Scraper Mount BB013-65C Scraper Assemby Knob BB003-53V Upper Saw Guide with "V" Front AVAILABLE WHILE SUPPLIES LAST BB002-21VC Lower Saw Guide w/ Carbide Insert BB041A-66F Blade Scraper Holder Assembly - Fiber BB041A-66S Blade Scraper Holder Assembly - Steel BUTCHER BOY BB002-21V Lower Saw Guide with "V" Front BB Filler Block - Nylon BB118 Filler Block - Fiber BB119LH Filler Block - Fiber (Left Hand Saws Only) FITS SA30 - SA36 BB Blade Scraper Holder Assembly - No Scrapers BB043 Blade Scraper Spring FITS SA20 BB067 Wheel Scraper - Fiber Upper & Lower Wheel BB001SA-2069 Filler Block - Nylon fits..sa20 BB093 Lower Guide with Pin BB079 Guide Block BB001A-20A/S Filler Stud COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 SA30 SA36 BB (20) Filler Block - Nylon X X X X X X X BB001A-20A/S (15B) FHSS N Filler Stud X BB001SA Filler Block - Nylon X BB002-21V (21) Lower Saw Guide with "V" Front X X X X X X X X BB002-21VC Lower Saw Guide w/ Carbide Insert X X X X X X X X BB003-53V (53) Upper Saw Guide with "V" Front X X X X X X X BB003-53VC N/A Upper Saw Guide w/ Carbide Insert X X X X X X X BB013-65C (65C) Scraper Assembly Knob X X X BB Blade Scraper Holder Assembly only X X X X X X X X BB041A-66F (66F)10460 Blade Scraper Holder Assy - Fiber X X X X X X X X BB041A-66S (66S)10460 Blade Scraper Holder Assy - Steel X X X X X X X X BB043 (66) Blade Scraper Spring X X X X X X X BB044-67A Rear Blade & Wheel Scraper Mount BB Wheel Scraper - Fiber X X BB Guide Block X X BB Lower Guide with Pin X X BB118 (20) Filler Block - Fiber X X X X X X X BB119LH N/A Filler Block - Fiber (Left Hand Saws only) X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

40 99 National Band Saw, Established1953 REAR SCRAPERS, FITS and Cobra 4 3/4" BB Loc cking Thumb Screw BUTCHER BOY BB045A-17A Rear Scraper Mount Assembly 3" BB045-66D Rear Scraper Mount Don't forget to pick up some spare Bone-In cutting blades. Butcher Boy - B12...SB098" B14...SB112 B16...SB126 found on pages 60 and 61 BB Locking Thumb Screw BB120A Rear Scraper Assembly 3" BB121 Rear Scraper Mount BB041A-66F Blade Scraper Holder Assembly - Fiber BB041A-66S Blade Scraper Holder Assembly - Steel BB006-73F Blade Scraper - Fiber BB006-73S Blade Scraper - Steel BB065A-95 Rear Scraper Assembly BB Rear Scraper Mount BB Locking Thumb Screw BB Blade Scraper Holder Assembly - No Scrapers BB043 Blade Scraper Spring COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B BB006-73F (73F) Blade Scraper-Fiber X X X X X X X BB006-73S (73S) Blade Scraper-Steel X X X X X X X BB (66) Locking Thumb Screw X X X X X X X BB Blade Scraper Holder Assembly only, No Scraper X X X X X X X BB041A-66F (66) Blade Scraper Holder Assy - Fiber X X X X X X X BB041A-66S (66S) 10464S Blade Scraper Holder Assembly - Steel X X X X X X X BB043 (66) Blade Scraper Spring X X X X X X X BB045-66D (65) Rear Scraper Mount - New Style X X X BB045A-17A (17A) Rear Scraper Assy - New Style X X X BB Rear Scraper Mount X X BB065A Rear Scraper Assy X X BB120A Rear Scraper Assy X X BB Rear Scraper Mount X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

41 100 BB034 Scraper Holder Stud Assy BB028A Rear Scraper Assy SA20 RIGHT HAND fits..sa20 LEFT HAND RIGHT HAND SAWS BB028 Rear Scraper Body Right Hand or Left Hand BB191A-LH Front Scraper Assy - fits...left Hand Saws RIGHT HAND SAWS BB055A Front Scraper Assy (Old Style) BB040A Wheel Scraper Assy Fiber 5/8" BB Wheel Scraper Spring BB041A-66F Blade Scraper Holder Assy - Fiber BB Wheel Scraper - Fiber 5/8" Wide BB Blade Scraper Holder - No Scrapers BB190A-LH Rear Scraper Assy fits... Left Hand Saws BUTCHER BOY BB055 Front Scraper Body (Old Style) BB Wheel Scraper - Fiber 3/4" Wide RIGHT HAND SAWS BBSGBN Saw Guide Bearing with Neoprene Seals BB043 Blade Scraper Spring BB041A-66F Blade Scraper Holder Assy - Fiber BB006-73F Blade Scraper - Fiber BB006-73S Blade Scraper - Steel FITS MODEL BB023A Front Scraper Assy BB023 Front Scraper Body Right Hand or Left Hand BB Blade Scraper Holder No Scrapers BB041A-66F Blade Scraper Holder Assy - Fiber NBS P/N OEM P/N DESCRIPTION SA20 BB (33) Wheel Scraper - Fiber X BB006-73F (73F) Blade Scraper - Fiber X BB006-73S (73S) Blade Scraper - Steel X BB Front Scraper Body X BB023A (88A) Front Scraper -Assy X BB (35) Wheel Scraper Special 3/4" Wide X BB028 (89) Rear Scraper - Body X BB028A Rear Scraper - Assy X BB034 (97B) Scraper Holder Stud Assy X BB (59) Wheel Scraper Spring X BB040A Wheel Scraper Assy X BB Blade Scraper Holder Assembly only X BB041A-66F (66) Blade Scraper Holder Assy - Fiber X BB043 (66) Blade Scraper Spring X BB055 N/A Front Scraper Body (Old Style) X BB055A N/A Front Scraper Assy (Old Style) X BB190A-LH Rear Scraper Assy (Left Hand)) X BB191A-LH Front Scraper Assy (Left Hand) X BBSGBN (27) Saw Guide Bearing with Neoprene Seals X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

42 101 National Band Saw, Established1953 TABLE WHEEL, AXLE AND ROLLERS BB149A Carrying Table Wheel Assy Wheel, Bearings & Axle BB148 Carrying Table Wheel BUTCHER BOY BB008-11F Table Roller Flat BB008-11V Table Roller "V" Groove BB008-11U Table Roller "U" Grove BB127A Table Bearing Axle & Nuts BB147 Table Bearing (2 Required Per Wheel) BB146A Carrying Table Axle Assy BB031-69B Rod Mount & Locking Pin BB030-69A Rod Liner Pin BB066 Table Locking Lever BB072-56F Lever Adjusting Lock W/ Set Screw BB037-11B Table Holding gpin BB122A Track Brace Assembly BB025-56C Table Thumb Screw BB009-46A Bumper BB Table Stop Assy COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA16 SA20 BB008-11F (11A) Table Roller - Flat X X X X X X BB008-11V (11V) Table Roller "V" Groove X X X X X X BB008-11U (11U) Table Roller "U" Grove X X X X X X X BB009-46A (46A) Bumper X X X X X X BB (45) Table Stop Assembly X X X X X X BB025-56C 56C Table Thumb Screw X X X X X BB030-69A 69A Rod Liner Pin X X X BB031-69B Rod Mount & Locking Pin X X X BB037-11B (11B) Table Holding Pin X X X X X X X BB066 (56G) Table Locking Lever X X X BB072-56F (56F) Lever Adjusting Lock X X X X X BB122A (12C) Track Brace Assembly X X X BB127A (11C) Table Bearing Axle & Nuts X X X X X BB146A B Carrying Table Axle -Assy X X BB Table Bearing X X BB Carrying Table Wheel X X BB149A Carrying Table Wheel -Assy X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

43 102 BB015-3B Door Handle Washer BB035 Door Knob BB097-3D Door Pull Guide Knob FITS COBRA 14 & 16 DOORS BB167 Door Safety Switch BB004-3F Door Latch - New Style BUTCHER BOY BB100 Door Hinge Set, Stainless BB017A Adjustable Leg 1.39" BB018A Drive-In Leveling Leg BB021A Motor Torque Rod BB038 Torque Bracket BB202 Motor Mount Rubber Bushing BB Bone Dust Pan - B16 21" x 8¼" x 3½" BB Bone Dust Pan - B14 19" x 8½" x 3½" BB Bone Dust Pan - B12 17" x 8" x 3½" COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BB004-3F (3F) Door Latch - New Style X X X X X BB015-3B (3B) N/A Door Handle Washer X X X BB017A (58E) Adjustable Leg X X X X X BB018A (58F) Drive-In Leveling Leg X X X X X BB021A (36A) Motor Torque Rod X X X X X X X X BB Door Knob X X BB Torque Bracket X X X X X X X BB Bone Dust Pan - B16 21" x 8¼" x 3½" X X X BB Bone Dust Pan - B14 19" x 8½" x 3½" X X X BB Bone Dust Pan - B12 17" x 8" x 3½" X BB097-3D (3D) Door Pull Guide Knob X X X BB100 (49) Door Hinge Set, Stainless X X X BB Door Safety Switch X X BB Motor Mount Rubber Bushing X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment.

44 103 National Band Saw, Established1953 The Butcher Boy saw repair kits have been updated to be universal. The included guides, include the carbide insert and will work on all listed models. BB003-53VC Upper Saw Guide with Carbide Insert BB002-21VC Lower Saw Guide with Carbide Insert BBRK-1 Butcher Boy Repair Kit Models B12, B14, B16 Cobra 14, & 1640 BB End Catch BB009-46A Bumper BUTCHER BOY BB Filler Block BB003-53VC Upper Saw Guide with Carbide Insert BB006-73S Blade Cleaner - Steel BB006-73F Blade Cleaner - Fiber BBRK-3 Butcher Boy Repair Kit Model SA20 BBSGB Saw Guide Bearing BB029-52A Bearing Thumb Screw BB Wheel Scraper BB002-21VC Lower Saw Guide with Carbide Insert BB009-46A Bumper BB001SA-2069 Filler Block BB006-73S Blade Cleaner - Steel BB006-73F Blade Cleaner - Fiber BBSGB Saw Guide Bearing BB029-52A Bearing Thumb Screw BB Wheel Scraper BBRK-5 Hardware Kit Butcher Boy Saws Kit constists of 279 STAINLESS STEEL nuts, bolts, screws and washers in a break resistant plastic container. QTY DESCRIPTION 15 5/16 TOOTH WASHER HEX NUT HEX NUT HEX NUT 25 1/4-20 HEX NUT 20 5/16-18 HEX NUT x 1/4 ROUND HEAD, SLOTTED MACHINE SCREW x 3/8 ROUND HEAD, SLOTTED MACHINE SCREW x 1/4 ROUND HEAD, SLOTTED MACHINE SCREW x 3/8 ROUND HEAD, SLOTTED MACHINE SCREW 12 1/4-20 x 3/4 FILLISTER, SLOTTED SCREW 12 1/4-20 x 1 1/8 FILLISTER, SLOTTED SCREW 10 1/4-20 x 1 FLAT HEAD, PHILLIPS MACHINE SCREW 5 5/16-18 x 1 1/2 ROUND HEAD, SLOTTED MACHINE SCREW COBRA NBS P/N OEM P/N DESCRIPTION B12 B14 B SA20 BBRK-5 N/A Hardware Kit X X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Butcher Boy equipment. Order at:

45 104 WHEELS / SHAFTS / HUB ASSEMBLIES UPPER Matching Saw Blade Length DIAMETER SAW UPPER SHAFT UPPER UPPER WHEEL BLADE SHAFT DIAMETER ASSEMBLY WHEEL DIAMETER LENGTH 5012 H071-14US " 5013 H072-13US H039-13F 13" 106" 5014 H071-14US H040-14F 14" 112" 5016 H070-16US H162A H041-16F 16" 128" 5114 H071-14US H040-14F 14" 112" 5213 H072-13US H039-13F 13" 106" 5214 H071-14US H040-14F 14" 112" 5216 H US H166A H041-16F 16" 128" 5216 EARLY H070-16US H162A H041-16F 16" 128" 5216 MOD H US H041-16F 16" 128" 5313 H072-13US H039-13F 13" 106" 5413 H072-13US H039-13F 13" 112" 5514 H US H154A H F 14" 112" 5614 H US H154A H F 14" 112" 5700 H H179A H126 16" 142" 5701 H H179A H126 16" 142" 5801 H H179A H126 16" 142" 6614 H H255 14" 126" 6801 H H250 * 16" 142" HOBART H265A Upper Wheel -Complete - for 6801 Wheel, Bushing, Bearings, Seals Pulley Covers. Just slide on shaft. H266A Upper Wheel -Complete - for 6614 Wheel, Bushing, Bearings, Seals Pulley Covers. Just slide on shaft. These wheels and components are also located on page 102 Wheel Lock Lever * Wheel Only- does not incude bushing/ bearings and seals ( See Page 102 ) 3/8" Dia. H042S Shaft Lock Pin (Special) 3/8" Dia., 5/16" Dia. x 3" Long H044 Lock Lever Stud H058 Frost Catch H127 Wheel Lock Lever NBS P/N OEM P/N DESCRIPTION H042S N/A Shaft Lock Pin (Special) H044 M20851 Lock Lever Stud X X X X X X X X X X H058 M79686 Frost Catch X X X X X X X X X X H Wheel Lock Lever X X X X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

46 WHEELS / SHAFTS / HUB ASSEMBLIES LOWER DIAMETER HOBART SAW LOWER SHAFT L0WER LOWER WHEEL MODEL SHAFT DIAMETER ASSEMBLY WHEEL DIAMETER EARLY 5216 MOD H LS H072-13LS H039-13F 13" H LS H040-14F 14" H LS H165A H041-16F 16" H LS H040-14F 14" H072-13LS H039-13F 13" H LS H040-14F 14" H LS H160A H041-16F 16" H LS H041-16F 16" H LS H150A H041-16F 16" H072-13LS H039-13F 13" H072-13LS H039-13F 13" H F 14" H LS H148A H F 14" H H126 16" H H126 16" H H126 16" H H256 14" H H126 16" Saw Blades: See Pages: 60 and 61 SB for Bone-In BK for Boneless Hobart , " Hobart , 5213, " Hobart , 5114, 5214, 5413, 5414, 5514, " Hobart , 5116, 5216, 5216HS " Hobart , 5701, 5801, " " All catalog items and MORE available at The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

47 106 H162A Upper Bearing Housing Assembly- Complete & Ready to Install, Includes Bearing Carrier Shield, Bearing Shield Spring & Shaft Lock Pin Upper Bearing Housing Assy & Components Models 5016, 5116 & Early 5216 H161 Bearing Shield Spring H197 Bearing Retainer Screw H052 Grease Seal H138 Shaft Lock kpi PIn (Extra Long) 5/16" x 3" H070-16US UpperLESS Wheel Shaft STAIN STEEL H153 Set Screw H197 Bearing Retainer Screw HOBART H142 Front Bearing Retainer H152 H070R Bearing Cap Bearing Retainer H158 Upper Bearing Shim Set (10/pkg) H117 Bearing Carrier Shield HMB113/245 Rear Main Bearing TIMKEN H163 Upper Bearing Housing HX300 Shaft Lock Pin Installation Tool Use this tool when installing shaft lock pin to prevent peening of pin. Can be used on all 5/16 and 3/8 diameter pins. HMB510/548 Front Main Bearing TIMKEN Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 3/8" 6 3/4" 5/16" 1 3/8" 1 1/8" H070-16US HMB510/548 HMB113/245 NBS P/N OEM P/N DESCRIPTION EARLY 5216 H Grease Seal X X X H070-16US Upper Wheel Shaft X X X H070R Bearing Retainer X X X H Bearing Carrier Shield X X H Shaft Lock Pin (Extra Long) 5/16" x 3" X X H Front Bearing Retainer X X X H Bearing Cap X X H153 SC-99-4 Set Screw (Each) X X X H Upper Bearing Shim Set (10/pkg) X X X H Bearing Shield Spring X X X H162A N/A Upper Bearing Housing Assembly - Complete & Ready to Install, Includes Shield & Pin X X H Upper Bearing Housing X X H197 SC Bearing Retainer Screw (Each) X X HMB113/245 BR-2-16 Rear Upper & Lower Main Bearing X X X HMB510/548 BR-2-20 Front Upper & Lower Main Bearing X X X HX300 N/A Shaft Lock Pin Installation Tool X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

48 Upper Bearing Housing Assy & Components Model 5216 Shaft Bearing Seat * Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 3/8" 6 11/16" 5/16" 1 1/4" 1 1/4" H US HMB048/010 HMB048/010 HOBART H166A Upper Bearing Housing Assembly - Complete & Ready to Install, Includes Bearing Shield, Bearing Spring & Shaft Lock Pin * H US UpperLESS Wheel Shaft STAIN STEEL H197 Bearing Retainer Screw H161 Bearing Shield Spring H197 Bearing Retainer Screw H083 Shaft Seal H157 Upper Bearing Plate H138 Shaft Lock Pin (Extra Long) 5/16" x 3" H153 Set Screw H070R Bearing Retainer H152 Bearing Cap 3/16" H116 Bearing Carrier Shield (H116) IS THE MOST CURRENT SHIELD APPROX 3/16 SHOULDER (H083) SEAL OD IS 2 3/8" H172 Front Bearing Retainer HMB048/010 Front & Rear Main Bearing TIMKEN H158 Upper Bearing Shim Set (10/pkg) 1/16" H176 Bearing Carrier Shield (5216 Modified) 1/16 Shoulder H186 Upper Shaft Seal (5216 Modified) 2 3/8" OD The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at: HMB048/010 Front & Rear Main Bearing TIMKEN H155 Upper Bearing Housing FITS MODEL 5216 NBS P/N OEM P/N DESCRIPTION H070R Bearing Retainer H US Upper Wheel Shaft STAINLESS STEEL H Shaft Seal H Bearing Carrier Shield H Shaft Lock Pin (Extra Long) 5/16" x 3" H Bearing Cap H153 SC-99-4 Set Screw (Each) H Upper Bearing Housing H Upper Bearing Plate H Upper Bearing Shim Set (10/PKG) H Bearing Shield Spring H166A N/A Upper Bearing Housing Assembly H Front Bearing Retainer H Bearing Carrier Shield (5216 Modified) H Upper Shaft Seal (5216 Modified) H197 SC Bearing Retainer Screw (Each) HMB048/010 BR-2-27 Upper Main Bearing - Front & Rear

49 108 Upper Bearing Housing Assy & Components Model 5514 & 5614 Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 3/8" 6 1/4" 3/8" 1 1/4" 1 1/4" H US HMB048/010 HMB048/010 H154A Upper Bearing Housing Assembly Complete & Ready to Install - Includes Bearing Carrier Shield, Bearing Shield Spring & Shaft Lock Pin H161 Bearing Shield Spring H197 Bearing Retainer Screw H157 Upper Bearing Plate H139 Shaft Lock Pin (Extra Long) 3/8" x 3" (Replaces H042W) H US Upper WheSTEEL eel Shaft STAINLESS H153 Set Screw H197 Bearing Retainer Screw HOBART H083 Shaft Seal H152 Bearing Cap H172 Front Bearing Retainer H070R Bearing Retainer H158 Upper Bearing Shim Set (10/pkg) H116 Bearing Carrier Shield HMB048/010 Front & Rear Main Bearing TIMKEN HMB048/010 Front & Rear Main Bearing TIMKEN H155 Upper Bearing Housing FITS MODEL 5514 & 5614 NBS P/N OEM P/N DESCRIPTION H070R Bearing Retainer X X X H US Upper Wheel Shaft STAINLESS STEEL X X H Shaft Seal X X H Bearing Carrier Shield X X X H Shaft Lock Pin (Extra Long) 3/8" x 3" X X X H Bearing Cap X X X H153 SC-99-4 Set Screw (Each) X X X H154A Upper Bearing Housing Assembly Complete X X H Upper Bearing Housing X X X H Upper Bearing Plate X X X H Upper Bearing Shim Set (10/pkg) X X X H Bearing Shield Spring X X X H Front Bearing Retainer X X X H197 SC Bearing Retainer Screw (Each) X X X HMB048/010 BR-2-27 Upper Main Bearing - Front & Rear X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

50 Lower Bearing Housing Assy & Components Model 5016 Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 3/8" 10 1/2" 5/16" 1 3/8" 1 1/8" H LS H MB510/548 H MB113/245 H144 Woodruff Key HOBART H165A Lower Bearing Housing Assembly (Includes Shaft Lock Pin, Nut, & Grease Conveyer Complete &Ready to Install) H LS Lower Wheel Shaft STAINLESS STEEL H138 Shaft Lock kpi Pin (Extra Long) 5/16" x 3" H197 Bearing Retainer Screw H145 Shaft Nut H146-1 Grease Conveyer 1 3/8" OD x 7/8" Long H197 Bearing Retainer Screw H171 Front Bearing Retainer H052 Grease Seal H143 Rear Lower Bearing Retainer - 1 3/8" I.D. H159 Upper Bearing Shim Set (10/pkg) HMB113/245 Rear Main Bearing TIMKEN H156 Lower Bearing Housing HMB510/548 Front Main Bearing TIMKEN FITS MODEL 5016 The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at: NBS P/N OEM P/N DESCRIPTION H Grease Seal H LS Lower Wheel Shaft STAINLESS STEEL H Shaft Lock Pin (Extra Long) 5/16" x 3" H Rear Lower Bearing Retainer - 1 3/8" I.D. H144 KW-3-15 Woodruff Key H145 NS Shaft Nut (2 Required) H Grease Conveyer 1 3/8" OD x 7/8" Long H Lower Bearing Housing H X Upper Bearing Shim Set (10/pkg) H165A N/A Lower Bearing Housing Assembly H Front Bearing Retainer H197 SC Bearing Retainer Screw (Each) HMB113/245 BR-2-16 Upper & Lower Main Bearing HMB510/548 BR-2-20 Front Upper & Lower Main Bearing

51 110 Lower Bearing Housing Assy & Components Model 5216 Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 3/8" 10" 5/16" 1 3/8" 1 1/8" HMB510/548 HMB113/245 H144 Woodruff Key H160A Lower Bearing Housing Assembly (Includes Shaft Lock Pin, Nut, Key & Grease Conveyer Complete & Ready to Install) H LS Lower Wheel Shaft STAINLESS STEEL HOBART H197 Bearing Retainer Screw H171 Front Bearing Retainer H052 Grease Seal H138 Shaft Lock Pin (Extra Long) 5/16" x 3" H197 Bearing Retainer Screw H145 Shaft Nut H146-2 Grease Conveyer 1 3/8" OD x 1/2" Long H143 Rear Lower H159 Bearing Retainer - 1 3/8" I.D. Lower Bearing Shim Set (10/pkg) HMB113/245 Rear Main Bearing TIMKEN HMB510/548 Front Main Bearing TIMKEN H156 Lower Bearing Housing FITS MODEL 5216 NBS P/N OEM P/N DESCRIPTION H Grease Seal H LS Lower Wheel Shaft - Model 5216 STAINLESS STEEL H Shaft Lock Pin (Extra Long) 5/16" x 3" H Rear Lower Bearing Retainer - 1 3/8" I.D. H144 KW-3-15 Woodruff Key H145 NS Shaft Nut (2 Required) H146-2 B Grease Conveyer 1 3/8" OD x 1/2" Long H Lower Bearing Housing H X Lower Bearing Shim Set (10/pkg) H160A N/A Lower Bearing Housing Assembly H Front Bearing Retainer H197 SC Bearing Retainer Screw (Each) HMB113/245 BR-2-16 Rear Lower Main Bearing HMB510/548 BR-2-20 Front Upper & Lower Main Bearing The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

52 Lower Bearing Housing Assy & Components Modified Model 5216 Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. NOTE: This Rear Bearing Seat is larger in diameter than the standard Model 5216 by 1/8" 1 3/8" 10 1/8" 5/16" 1 3/8" 1 1/4" HMB510/548 HMB048/010 H144 Woodruff Key HOBART H150A Lower Bearing Housing Assembly (Includes Shaft Lock Pin, Nut, Key & Grease Conveyer Complete &Ready to Install) H LS Lower Wheel Shaft STAINLESS STEEL H197 Bearing Retainer Screw H171 Front Bearing Retainer H052 Grease Seal H138 Shaft Lock Pin (Extra Long) 5/16" x 3" H197 Bearing Retainer Screw H159 Lower Bearing Shim Set (10/pkg) H145 Shaft Nut H146-4 Grease Conveyer 1 11/16" OD x 1/2" Long H170 Rear Lower Bearing Retainer /16" I.D. HMB048/010 Rear Main Bearing TIMKEN HMB510/548 Front Main Bearing TIMKEN H149 Lower Bearing Housing FITS MODEL 5216 NBS P/N OEM P/N DESCRIPTION H Grease Seal H LS Lower Wheel Shaft STAINLESS STEEL H Shaft Lock Pin (Extra Long) 5/16" x 3" H144 KW-3-15 Woodruff Key H145 NS Shaft Nut (2 Required) H Grease Conveyer 1 11/16" OD x 1/2" Long H Lower Bearing Housing H150A Lower Bearing Housing Assembly H X Lower Bearing Shim Set (10/pkg) H Rear Lower Bearing Retainer /16" I.D. H Front Bearing Retainer H197 SC Bearing Retainer Screw (Each) HMB048/010 BR-2-27 Upper & Lower Main Bearing HMB510/548 BR-2-20 Front Upper Main Bearing The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

53 112 Lower Bearing Housing Assy & Components Model 5614 Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 3/8" 10" 3/8" 1 3/8" 1 1/4" HMB510/548 HMB048/010 H148A Lower Bearing Housing Assembly (Includes Shaft Lock Pin, Nut, Key & Grease Conveyer Complete &Ready to Install) H144 Woodruff Key H LS Lower Wheel Shaft STAINLESS STEEL HOBART H197 Bearing Retainer Screw H052 Grease Seal H139 Shaft Lock Pin (Extra Long) 3/8" x 3" (Replaces H042W) H197 Bearing Retainer Screw H145 Shaft Nut H146-3 Grease Conveyer 1 11/16" OD x 7/8" Long H171 Front Bearing Retainer H170 Rear Lower Bearing Retainer /16" I.D. H159 Lower Bearing Shim Set (10/pkg) HMB048/010 Rear Main Bearing TIMKEN HMB510/548 Front Main Bearing TIMKEN H149 Lower Bearing Housing FITS MODEL 5614 NBS P/N OEM P/N DESCRIPTION H Grease Seal H LS Lower Wheel Shaft STAINLESS STEEL H Shaft Lock PIn (Extra Long) 3/8" x 3" H144 KW-3-15 Woodruff Key H145 NS Shaft Nut (2 Required) H Grease Conveyer 1 11/16" x 7/8" Long H148A Lower Bearing Housing Assembly H Lower Bearing Housing H X Lower Bearing Shim Set (10/pkg) H Rear Lower Bearing Retainer /16" I.D. H Front Bearing Retainer H197 SC Bearing Retainer Screw (Each) HMB048/010 BR-2-27 Rear Lower Main Bearing HMB510/548 BR-2-20 Front Upper Main Bearing The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

54 Upper Shaft Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia Dia 1 1/16" 5 3/4" 5/16" 1 3/8" 1 1/8" HMBN/R HMNW/R Upper & Lower Shaft Models 5013, 5213, 5313, 5413 H153 Screw H072R Bearing Retainer HMBW/R Upper & Lower Main Bearing With Ring HOBART HMBN/R Upper & Lower Main Bearing No Ring H138 Shaft Lock Pin (Extra Long) 5/16" x 3" H072-13US Upper Wheel Shaft H144 Woodruff Key HMBW/R Upper & Lower Main Bearing With Ring H072-13LS Lower Wheel Shaft Fits Models: 5214 and 5313 HSGB Saw Guide Bearing W/Metal Shields HMBN/R Upper & Lower Main Bearing No Ring H138 Shaft Lock Pin (Extra Long) 5/16" x 3" Lower Shaft Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 1/16" 11" 5/16" 1 3/8" 1 1/8" HMBN/R HMNW/R HSGBN Saw Guide Bearing W/Neoprene Seals NBS P/N OEM P/N DESCRIPTION H072-13LS Lower Wheel Shaft X X X X H072-13US Upper Wheel Shaft X X X X H072R Bearing Retainer X X X X H Shaft Lock Pin (Extra Long) 5/16" x 3" X X X X H144 KW-3-15 Woodruff Key X X X X H153 SC Screw (Each) X X X X HMBN/R BB-6-41 Upper & Lower Main Bearing, No Ring X X X X HMBW/R BB-6-43 Upper & Lower Main Bearing, With Ring X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

55 114 Upper & Lower Shaft Components Models 5012, 5014, 5114, 5214 H153 Screw Upper Shaft Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. HMB113/245 Upper Main Bearing TIMKEN H070R Bearing Retainer 1 1/16" 6 3/16" 5/16" 1 1/8" 1 1/8" HMB113/245 HMB113/245 HMB113/ /245 Upper Main Bearing TIMKEN H161 Bearing Shield Spring H071-14US Upper Whe eel Shaft H053 Grease Seal, Upper & Lower Main Bearing HOBART H118 Bearing Carrier Shield H138 Shaft Lock Pin (Extra Long) 5/16" x 3" Upper Shaft and Bearings HMB113/245 Lower Main Bearing TIMKEN H145 Shaft Nut H146-1 Grease Conveyer 1 3/8" OD x 7/8" Long H144 Woodruff Key H053 Grease Seal, Upper & Lower Main Bearing HMB113/245 Lower Main Bearing TIMKEN H138 Shaft Lock Pin (Extra Long) 5/16" x 3" H LS Lower Wheel Shaft Lower Shaft and Bearings Lower Shaft Shaft Bearing Seat Front Shaft Lock Pin Front Rear Dia. Length Hole Dia. Dia. 1 1/16" 10" 5/16" 1 1/8" 1 1/8" HMB113/245 HMB113/245 NBS P/N OEM P/N DESCRIPTION H Grease Seal, Upper & Lower Main Bearing X X X X H070R Bearing Retainer X X X X H071-14US Upper Wheel Shaft X X X X H LS Lower Wheel Shaft X X X X H Bearing Carrier Shield X X X X H Shaft Lock Pin (Extra Long) 5/16" x 3" X X X X H144 KW-3-15 Woodruff Key X X X X H145 NS Shaft Nut X X X X H146-1 Grease Conveyer X X X X H153 SC Screw (Each) X X X X H Bearing Shield Spring X X X X HMB113/245 BR-2-16 Upper & Lower Main Bearing X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

56 Upper & Lower Shaft Components Models 5700, 5701, 5801 H179A Upper Bearing Assembly Complete with Seals & Shaft Lock Pin HOBART H193 Upper Bearing Housing Mounting Hardware Kit Stainless Steel (Mounts H178 Housing to saw frame) Upper Shaft Shaft Pin Bearing Bearing Length Hole Seat (F) Seat (R) Dia Dia 7 3/16" 3/8" 1 3/8" 1 3/8" H114 H114 Lower Shaft H178 Upper Bearing Housing H175 Shaft Lock Pin 3/8" x 3" Shaft Pin Front Bearing Bearing Length Hole Dia. Seat (F) Seat (R) Dia Dia 7 1/16" 3/8" 1 3/8" 1 3/8" 1 3/8" H114 H114 H232 Set Screw 5/16-18 H115 Upper Wheel Shaft w/ 5/16-18 Set Screws STAINLESS STEEL H232 * Set Screw 5/16-18 H140 Lower Wheel Shaft STAINLESS STEEL w/ H232 5/16-18 Set Screws H177A Upper Shaft & Bearing Assembly Upper H114 Upper Main Bearing H168 Upper & Lower Shaft Seal H175 Shaft Lock Pin 3/8" x 3" Lower H119 Shaft Hardware Set H114 Upper Main Bearing H167 Upper Shaft Spacer H261 Lower Shaft Key H168 Upper & Lower Shaft Seal H114 Lower Main Bearing H114 Lower Main Bearing H119 Shaft Hardware Set H188 Loading Spring All the Individual Lower Shaft Components sho hown can be ordered as a Kit H232 * Set Screw 5/16-18 (2 Required) To make it easier for repair - NBS Shafts come with 5/16-18 set screws (Note: The original Shaft Set Screws are 1/4-20) H260 Set Screw 1/ for OEM shafts These listed saws use the SB142, 142" Band Saw Blade: Hobart , 5701, 5801 See Pages 60 and 61 H312 Lower Shaft Components -Kit- All Parts Shown Above NBS P/N OEM P/N DESCRIPTION H114 BB-8-14 Upper & Lower Main Bearing X X X H Upper Wheel Shaft STAINLESS STEEL X X X H119 N/A Shaft Hardware Set X X X X X H Lower Wheel Shaft STAINLESS STEEL X X X X X H Upper Shaft Spacer X X X H168 B Upper & Lower Shaft Seal X X X X X H / Shaft Lock Pin 3/8" x 3" X X X X X H177A Upper Shaft & Bearing Assembly X X X H Upper Bearing Housing X X X H179A Upper Bearing Assembly X X X H188 SL-3-11 Loading Spring X X X X X H193 N/A Upper Bearing Housing Mounting Kit X X X H232 N/A Set Screw 5/16-18 X X X H260 SC Set Screw 1/4-20 X X X H Lower Shaft Key X X X X X H312 Lower Shaft Components - KIT X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

57 116 Upper Wheel & Shaft Components Models 6614 & 6801 Upper Wheel Components H044 Lock Lever Stud H058 Frost Catch H248 Pulley Retainer H247 Rear Pulley Cover H239 Rear Shaft Seal H249 Upper Shaft All these components are included in the H265A and H266A Complete Wheels H265A Upper Wheel -Complete - for 6801 Wheel, Bushing, Bearings, Seals Pulley Covers. Just slide on shaft. H266A Upper Wheel -Complete - for 6614 Wheel, Bushing, Bearings, Seals Pulley Covers. Just slide on shaft. H306 Retaining Ring (fits NBS wheels only) HOBART H243 Retaining H238 Upper Shaft Bearing H238 Upper Shaft Bearing H244 Pulley Bush- All the Individual Upper Shaft Components shown can be ordered as a Kit H316 Upper Shaft Components -Kit- All Parts Shown Above 2-H238, H239, H240, H243 and H244 H240 Front Shaft Seal OD 2.450" H245 Front Pulley Cover H267 Cover Screw Don't forget your spare Band Saw Blades: See Pages: 60 and 61 SB142 or SB126 and Boneless Cutting BK142 and BK126 NBS P/N OEM P/N DESCRIPTION H044 M20851 Lock Lever Stud H058 M79686 Frost Catch H238 BB Upper Shaft Bearing H Rear Shaft Seal H Front Shaft Seal H243 RR Retaining Ring H Pulley Bushing H Front Pulley Cover H Rear Pulley Cover H Pulley Retainer H Upper Shaft H265A Wheel Assy, fits " Wheel H266A Wheel Assy, fits " Wheel H267 SC Cover Screw (Each) H306 N/A Retaining Ring H316 N/A Upper Wheel Components- KIT Hobart SB142" SB126" The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

58 Lower Wheel Shaft & Components Upper Wheel and Lower Shaft Components Models 6614 & 6801 H306 Retaining Ring (fits NBS wheels only) H255 Upper Wheel - for " wheel H250 Upper Wheel - for " wheel HOBART H119 Shaft Hardware Set H188 Loading Spring H114 Lower Main Bearing H114 Lower Main Bearing All the listed Lower Shaft Components shown can be ordered as a Kit H312 Lower Shaft Components -Kit- All Parts Shown Above H168 Upper & Lower Shaft Seal H252 & H251 BEARINGS INCLOSED IN MOTOR H232 * Set Screw 5/16-18 H260 Set Screw 1/ for OEM shafts H261 Lower Shaft Key H175 Shaft Lock Pin 3/8" x 3" H140 Lower Wheel Shaft STAINLESS STEEL w/ H232 5/16-18 Set Screws *H232 Set Screw 5/16-18 (2 Required) To make it easier for repair - NBS Shafts come with 5/16-18 set screws (Note: The original Shaft Set Screws are 1/4-20) Lower Shaft Shaft Pin Front Bearing Bearing Length Hole Dia. Seat (F) Seat (R) Dia Dia 7 1/16" 3/8" 1 3/8" 1 3/8" 1 3/8" H114 H114 H2522 Rear Motor Bearing H251 Front Motor Bearing Use the following Band Saw Blades: Hobart SB142" SB126" NBS P/N OEM P/N DESCRIPTION H114 BB-8-14 Upper & Lower Main Bearing H119 N/A Shaft Hardware Set H Lower Wheel Shaft STAINLESS STEEL H168 B Upper & Lower Shaft Seal H / Shaft Lock Pin 3/8" x 3" H188 SL-3-11 Loading Spring H232 N/A Set Screw 5/16-18 H Wheel Assy, fits " Wheel H251 N/A Bearing, Front Motor H252 N/A Bearing, Rear Motor H Wheel Assy, fits " Wheel H260 SC Set Screw 1/4-20 H Lower Shaft Key H306 N/A Retaining Ring H312 N/A Lower Shaft Components - KIT The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

59 118 p/n Sticker Danger Replacement Danger Sticker for all Guards. Universal, Can be used for other ap- plications H095A Upper Guide Assembly - Complete (Includes: Slide Rod, Upper Guide Mount,Blade Guard, Upper Guide, Carbide Back-Up Stud,Spring, Lock Nut & Stud) H103A Slide Rod Tension Assembly (fine thread 18 TPI ) H085 Knob H095A-M Upper Guide Sub-Assembly (Includes: All Parts Of H095A Complete Assembly except H100 Slide Rod) H236 Plug Button fits... on Column 7/8" Dia H088 Threaded Stud 1.625" H089 Upper Wiper Support Stud 2.625" H093 Upper Guide Knob & Stud H100 Slide Rod Length = 26 1/2" H057 Pulley Wiper Spring (Stainless) H099 Blade Guard Length = 18 5/8" H095 Upper Guide Mount H026V Upper Saw Guide USE THIS TOOL WITH A RATCHET TO EASILY UNSCREW THE SLIDE ROD SCREW THAT BECOMES FROZEN WITH CORROSION. TWO DIFFERENT SIZE TIPS TO FIT OLDER AND NEWER SAWS. H268 Adjusting Screw (Each) 2 Required per Mount H318 Screw x 1/2 Socket Head for Upper Saw Guide Mount HX325 Slide Rod Adjusting Screw Removal Tool Hardened Edge H032 Carbide Back-Up H033 Back-Up Spring H034 Back-Up Plug Nylon H086 Steel Back-Up Stud & Nut (Will Replace & Interchange With Nylon Plug) HOBART NBS P/N OEM P/N DESCRIPTION H026V P Upper Saw Guide X X X X X H032 M Carbide Back-Up Stud X X X X X H033 M Back-Up Spring X X X X X H034 SC Back-Up Plug X X X X X H057 M71364 Pulley Wiper Spring (Stainless) X X H085 M67315 Knob X X H086 SC Steel Back-Up Stud & Nut X X X X X H088 V21158 Threaded Stud X X H089 M71362 Upper Wiper Support Stud X H093 A Upper Guide Knob & Stud X X X X X H095 A Upper Guide Mount X X X X X H095A A Upper Guide Assembly Complete X X X X X H095A-M C Upper Guide Sub-Assembly X X X X X H099 P Blade Guard X X X X X H100 B Slide Rod X X X X X H103A M Slide Rod Tension Assembly X X X X X H236 PB-2-26 Slide Rod Tension Assembly X X X X X H Adjusting Screw X X X X X H318 SC-67-6 Screw for Upper Guide Mount X X X X X HX325 N/A Adjusting Screw Removal Tool X X X X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

60 FITS H3133 Guide Bar Support H271 Guide Bar Insert H269 Guide Bar Retainer H270 Screw, Guide Bar Retainer USE THIS TOOL WITH A RATCHET TO EASILY UNSCREW THE SLIDE ROD SCREW THAT BECOMES FROZEN WITH CORROSION. TWO DIFFERENT SIZE TIPS TO FIT OLDER AND NEWER SAWS. HX325 Slide Rod Adjusting Screw Removal Tool Hardened Edge HOBART p/n Sticker Danger H235A Slide Rod Adjusting Screw Assy (5700,5701 & 5801) (Coarse Thread 14TPI) H236 Plug Button fits... on Column 7/8" Dia H054A Upper Guide Support Assy Complete W/Saw Guide Upper Guide Support Assy Complete W/Saw Guide fits Replacement Danger Sticker for all Guards. Universal, Can be used for other applications H219 Upper Guide Support Bar H059 Upper Guide Holder The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at: H217 Upper Guide Adjusting Knob H024 Front Blade Guard Length = 20 1/2" H241 Front Blade Guard Length = 18 1/2" H Upper Guide H173 w/ Carbide Plug Upper Guide Stud 1/4-20 x 1" H180 Upper Guide w/ Carbide Plug Stainless Steel H122 Upper Guide w/ Carbide Plug (Fits Slant Saw) H164 Upper Guide w/ Carbide Plug (Fits Slant Saw) Stainless Steel NBS P/N OEM P/N DESCRIPTION H Front Blade Guard X X X X X H054A Upper Guide Support Assy X X X X H Upper Guide Holder X X X X X X H Upper Guide w/ Carbide Plug X X H Upper Guide w/ Carbide Plug X X X H164 N/A Upper Guide w/ Carbide Plug SS X X H173 SC-41-2 Upper Guide Stud X X X H180 N/A Upper Guide w/ Carbide Plug SS X X X H Upper Guide Adjusting Knob X X X X X X H Upper Guide Support Bar X X X X H235A Slide Rod Adjusting Screw Assy X X X X H236 PB-2-26 Plug Button X X X H Front Blade Guard X H Guide Bar Retainer X X X X H270 SL Screw, Guide Bar Retainer (Each) X X X X H Guide Bar Insert X X X H304A Upper Guide Assy X H Guide Bar Support X X X X HX325 N/A Adjusting Screw Removal Tool X X X X

61 120 AVAILABLE WHILE SUPPLIES LAST Very Limited Quantities Available H004 Wheel Cleaner - Fiber H010 Lower Wiper Plunger H023 Guide Bearing Stud H021 Blade Cleaner Spring - Right H016 Pulley Wiper Stud HOBART H017 Plunger Spring - Upper H018 Plunger Spring - Lower H009 Upper Wiper Plunger H019 Snap Ring - Lower Plunger H002 Upper Filler Block Fiber H005 Blade Cleaner - Nylon H015V Lower Saw Guide H007 Thumb Guard NBS P/N OEM P/N DESCRIPTION H001 V Filler Block - Nylon X X X X H002 V20845 Upper Filler Block - Fiber X H003V M20836 Lower Saw Guide X X H004 M22027 Wheel Cleaner - Fiber X X X H Blade Cleaner - Nylon X X X H007 V Thumb Guard X X X H009 M Upper Wiper Plunger X X X H010 V Lower Wiper Plunger X X X H011 V Hinge Pin X X X H012 M71363 Filler Block - Nylon (Through Hole) X X X X H015V M71369 Lower Saw Guide X X X H016 M Pully Wiper Stud X X X H017 M Plunger Spring - Upper X X X H018 V Plunger Spring - Lower X X X H019 RR-4-2 Snap Ring - Lower Plunger X X X H021 M Blade Cleaner Spring - Right X H Guide Bearing Stud X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

62 LOWER GUIDE CLEANER, ASSEMBLY AND BRACKETS H030 Wheel Cleaner Spring H112 Wheel Cleaner - Fiber HOBART H034 Back-Up Plug (Nylon) H086 Steel Back-Up Stud & Nut H033 Back-Up Spring H038A Lowe er Guide & Cleaner Bracket Assembly H032 Carbide Back-Up Stud H035 Adjusting Screw H174 Lower Guide Stud 1/4-28 x 7/8 H028V Lower Saw Guide - Slot With "V" Front H013 Wheel Cleaner - Fiber H174 Lower Guide Stud H027 1/4-28 x 7/8 Filler Block - Nylon (Blind Hole, Threaded) H036 Lower Guide Stud 1/4-28 x 3/4 H037 Lower Guide & Cleaner Bracket H185 Wiper Bracket Slideway H102A Fiber Blade Scraper Assembly H029 Blade Cleaner NBS P/N OEM P/N DESCRIPTION H013 M71368 Wheel Cleaner - Fiber X X H027 A Filler Block - Nylon (Blind Hole, Threaded) X X X X H028V M71379 Lower Saw Guide - Slot With "V" Front X X X X H029 M86340 Blade Cleaner X X X X X H030 M Wheel Cleaner Spring X X X X H032 M Carbide Back-Up Stud X X X X X H033 M Back-Up Spring X X X X X H034 SC Back-Up Plug (Nylon) X X X X X H035 SC Adjusting Screw X X X X X X H037 A Lower Guide & Cleaner Bracket X X X X X X H038A C Lower Guide & Cleaner Bracket Assembly X X X X X X H086 SC Steel Back-Up Stud & Nut X X X X X H102A B Fiber Blade Scraper Assembly X X X X X X H / Wheel Cleaner - Fiber X X X X H Filler & Guide Stud 1/4-28 x 7/8 hex cap X X X X X X H185 C Wiper Bracket Slideway X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

63 122 H174 Lower Guide Stud 1/4-28 x 7/8 LOWER GUIDE ASSEMBLY AND SUPPORT H195A Holder & Guide Assembly H233 Alignment Plate H194 Lower Guide Holder H106 Filler Block - Nylon HOBART H Lower Guide w/ Carbide Plug H181 Lower Guide w/ Carbide Plug Stainless Steel H283 Lower Guide Support H189 Pulley Wiper Block H121 Lower Guide w/ Carbide Plug (Fits Slant Saw) H169 Lower Guide w/ Carbide Plug (Fits Slant Saw) Stainless Steel H050A Upper/Lower Pulley Wiper Assembly H112 Wheel Cleaner - Fiber NBS P/N OEM P/N DESCRIPTION H050A B Upper/Lower Pulley Wiper Assembly X X X X X X X X H Filler Block - Nylon X X X X X H / Wheel Cleaner - Fiber X X X X X X X X H Lower Guide w/ Carbide Plug X X H Lower Guide w/ Carbide Plug X X X H169 N/A Lower Guide w/ Carbide Plug SS X X H174 SC Lower Guide Stud X X X X X H181 N/A Lower Guide w/ Carbide Plug SS X X X H Pulley Wiper Block X X X X X H Lower Guide Holder X X X X X H195A Holder & Guide Assembly X X X X H Alignment Plate X X X X X X X X H Lower Guide Support X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

64 H319 Screw 1/4-20 x 1 Blade Scraper Assembly Supoort HOBART WIPER AND BLADE CLEANERS H183A Bla ade Scraper Assembly with Fiber Scrapers HOBART H182 Support - Nylon, for Blade Scraper Assembly H184A Fiber Blade Scraper Assembly H056A Rear Wiper Assembly All catalog items and MORE available at H055A Rear Wiper Assembly H049A Blade Cleaner & Spring Assembly - Nylon H014 Blade Cleaner - Nylon H113 Blade Cleaner Steel H123 Blade Scraper Steel fits.. Slant Saw NBS P/N OEM P/N DESCRIPTION H Blade Cleaner - Nylon X X X X X H049A Blade Cleaner & Spring Assembly - Nylon X X X X X H055A Rear Wiper Assembly X X H056A Rear Wiper Assembly X X H113 B12170 Blade Cleaner - Steel X X H123 N/A Blade Scraper - Steel - Slant Saw X H Support - Nylong for H183A Blade Scraper Assy X X X X X H183A Blade Scraper Assembly with Fiber Scrapers X X X X X H184A N/A Fiber Blade Scraper Assembly - fits H183A X X X X X H182 N/A Suport - Nylon for Blade Scraper Assembly X X X X X H319 N/A Screw 1/4-20 x 1 Blade Scraper Assembly Support X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

65 124 H048A Table Stop Assy H047 Table Bumper H305 Motor Starting ti Capacitor mfd H237 Switch Special Circuit Momentary On. H147 Knob, Start/Stop Switch H062 Table Stop Assy H187 Table Bumper H192 Switch Rod Bushing H191 Speed Nut HOBART H253 Table Stop Assy H136 Table Roller (Nylon) H218 Table Roller Retaining Ring H254 Table Bumper H105 Switch Knob Extension Rod (10 1/8") H135A Table Roller Screw Assembly H104 Switch Knob Extension Rod (10 1/2") H131 Table Tension Stud H302 Bearing Mounting Hardare H008 Table Bearing Plated Steel H257 Table Bearing Stainless Steel NBS P/N OEM P/N DESCRIPTION H008 BB-8-11 Table Bearing X X X X X X X X X X H047 P Table Bumper X X X X X H048A P Table Stop Assembly X X X X X H Table Stop Assembly X X X H104 M Switch Extension Rod (10 1/2") X H105 M Switch Extension Rod (10 1/8") X X H131 A Table Tension Stud X X X H135A Table Roller Screw Assembly X X X H Table Roller (Nylon) X X X H Switch Knob X X X X X X X H Table Bumper X X X X H191 M80540 Speed Nut (Each) X X X X X H192 M80538 Switch Rod Bushing (Each) X X X X X H218 RR Table Roller Retaining Ring X X X H Switch X X X X X X X X H Table Stop Assembly X X H Table Bumper X X H257 BB-8-11 Table Bearing - Stainless Steel X X X X X X X X X X H302 SC Bearing Mounting Hardware X X X X X X X X X X H305 N/A Motor Starting Capacitor X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

66 125 National Band Saw, Established1953 Includes: Worm Bracket Assembly, Mounting Pin, Gauging Pin, Positioning Knob, Gauge Plate Bushing H097 ting Pin H090 Worm Bracket Knob H091A-14 Gauge Plate Assembly Complete H092A-16 Gauge Plate Assembly Complete Mount (Custom Designed to Remove in Either Direction) H108 Worm Bracket Bushing H051 Gauge Release Knob H107 Worm Bracket w/bushings HOBART H098 Nylon Slide H084 Gauge Plate Bushing (Fits in Gauge Plate Assemblies H & H091-16) H Gauge Plate Only (Includes Rack Bushing) H Gauge Plate Only (Includes Rack Bushing) H111 Gauge Plate Spring A WORN OUT 5114 GAUGE PLATE ASSY CAN BE REPLACED BY USING BOTH THE H091A-14 GAUGE PLATE ASSEBMLY AND H215 GAUGE PLATE RACK H134 Gauge Support/Rear fits H311 Gauge Support/Rear fits , 5214, 5514, 5614 H108 Worm Bracket Bushing H109 Worm Shaft Spacer H110 & Shaft Worm H097 Mou nting Pin H096 H133 Gauging Pin Gauge Support/Front fits H310 Gauge Support/Front fits , 5214, 5514, 5614 NBS P/N OEM P/N DESCRIPTION H051 M77514 Gauge Release Knob X H Slug X X X X H Gauge Plate Bushing X X X X X H087A Worm Bracket Assembly X X X X X H Worm Bracket Knob X X X X X H Gauge Plate Only (Includes Rack Bushing) X X X X H091A Gauge Plate Assembly Complete X X X X H R Gauge Plate Only (Includes Rack Bushing) X H092A Gauge Plate Assembly Complete X H093 A Positioning Knob X X X X H096 M85397 Gauging Pin X X X X X H097 M77235 Mounting Pin X X X X X H098 M79155 Nylon Slide X X X X X H107 M83481 Worm Bracket with Bushings X X X X X H108 N/A Worm Bracket Bushing X X X X X H109 WS18-36 Worm Shaft Spacer X X X X X H110 M77843 Worm & Shaft X X X X X H111 P77848 Gauge Plate Spring X X X X X H Gauge Support/Front X H Gauge Support/Rear X X H Gauge Plate Rack X X X X H Gauge Plate RaCK X H Gauge Support/Front X X X X H Gauge Support/Rear X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at: H063 Slug - Prevents Positioning Knob from damaging Rack H093 Positioning Knob H087A Worm Bracket Assembly STAINLESS STEEL H215 Gauge Plate Rack 7/8 Dia. x 19 3/16 Stainless Steel H216 Gauge Plate Rack 7/8 Dia. x 21 11/16 Stainless Steel

67 126 THICKNESS GAUGE AND GAUGE PLATE ASSEMBLY 5700, 5701, 5801, 6614 AND 6801 H198A Thickness Gauge Assembly H212 Glide Button H213 Gauge Plate Acorn Nut H200 Gauge Sub Assembly Includes Small & Large Bushings HOBART H199 Thickness Gauge Plate Stainless Steel H203 Gauge Bushing - Large H209 Locking Lever Pin H210 Gauge Handle H204 Gauge Bushing - Small H202 Gauge Lock Spring H201 Gauge Locking Lever Stainless Steel NBS P/N OEM P/N DESCRIPTION H198A Thickness Gauge Assembly X X X X X H Thickness Gauge Plate X X X X X H Gauge Sub Assembly X X X X X H Gauge Locking Lever X X X X X H Gauge Lock Spring X X X X X H Gauge Bushing - Large X X X X X H Gauge Bushing - Small X X X X X H Locking Lever Pin X X X X X H Gauge Handle X X X X X H Glide Button X X X X X H213 NS-25-4 Gauge Plate Acorn Nut (Each) X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

68 PUSHER PLATE AND ROD SUPPORT H242 Pusher Plate (Fits 5700, 5701, 5801, 6614, 6801) H206 Rear Shaft & Rod Support H208 Table Anchor Rod 5/16" x 19 5/8" Stainless Steel HOBART H205 Front Shaft & Rod Support H259 Table Anchor Rod 5/16" x 16 7/16" Stainless Steel H207 Gauge Plate Shaft 3/4" x 21 3/8" Stainless Steel H258 Gauge Plate Shaft 3/4" x 18 1/8" Stainless Steel H211 Cap Screw & Washer H214 Set Screw & Groove Pin (1/pkg) H264 Retaining Ring H263 Carriage Lock Spring H262 Carriage Lock Lever NBS P/N OEM P/N DESCRIPTION H Front Shaft & Rod Support X X X X X H Rear Shaft & Rod Support X X X X X H Gauge Plate Shaft 3/4" dia. X X X X H Table Anchor Rod 5/16" dia. X X X X H211 SC Cap Screw & Washer (Each) X X X X X H214 SC Set Screw & Groove Pin (1/pkg) X X X X X H Pusher Plate X X X X X H Gauge Plate Shaft X H Table Anchor Rod X H Carriage Lock Lever X X X X H Carriage Lock Spring X X X X H264 RR Retaining Ring X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

69 128 UPPER, LOWER DOORS AND HARDWARE H068A Upper Baffle Retaining Hinge Assy H141 Hinge Bracket H045 Door Spring H064A Upper Door Latch Hinge Assy H308 Baffle Mounting Screw H067 Upper Baffle Assy Impact Resistant ABS Plastic (Complete W/ Hardware 2x H068A, 1x H069A) H275 Hinge and Door Clip Mounting Hardware (2X) H060 Upper Door Impact Resistant ABS Plastic (Complete W/Hardware 2x H064A, 1x H065A) H276 Door Clip fits SS Door H280 Door Latch Clip fits SS door STAINLESS STEEL w/ Hardware H274 Hinge Lift Off H277 Upper Door Assy Stainless Steel (Complete W/Hardware H272, H273, H274,H275, H276, H280) H273 Hinge Long Pin H272 Hinge Short Pin H065A Upper Door Clip Assy H276 Door Clip H069A Upper Baffle Retaining Clip Assy H314 Lower Door Spring Clip H234A Lower Door Anchor HOBART H046A Steel Door Striker Plate Assembly Cross-section sec of Assembly H Bone Dust Pan " x 13" x 5" H061 Lower Door Impact resistant ABS Plastic Complete W/Hardware H234A NBS P/N OEM P/N DESCRIPTION H045 M68176 Door Spring X X X X H046A N/A Steel Door Striker Plate Assy X X X X H / Upper Door X X X H Lower Door X X X X X H064A Upper Door Latch Hinge Assy X X X H065A Upper Door Latch Clip Assy X X X X X H Upper Baffle Baffle Assy X X X H068A / Upper Baffle Retainer Hinge Assy X X X H069A Upper Baffle Retaining Clip Assy X X X H S Bone Dust Pan " x 13" x 5" X H141 P78917 Hinge Bracket X X X X X H234A Lower Door Anchor X X X X X H Hinge Short Pin X X X H Hinge Long Pin X X X H Hinge Lift Off X X X H275 N/A Hinge Mounting Hardware (2X) X X X H Door Clip X X X H Upper Door Assy - Stainless Steel X X X H Door Latch X X X H308 SC Upper Baffle Mounting Screw X X X H Door Cover Clip for Lower Saw Door X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

70 129 National Band Saw, Established1953 COLUMN GUARD, TABLE ASSEMBLIES (S.S) AND ADJUSTABLE FOOT 5700, 5701, 5801, 6614 AND 6801 H196 Blade Guard Pin (Column Guard) 1/4-20 fits..5700, 5701, 5801 H303 Blade Guard Pin (Column Guard) 1/4/-28 fits , 6801 H307 Blade Guard Pin -Repair (Column Guard) 5/16-24 fits..5700, 5701, Use this when column threads have been stripped out. (Retap hole to 5/16-24) HOBART H279 Column Guard H284 Left Table Assy Stainless Steel H285 Right Table Assy Stainless Steel H231 Foot- Adjustable 0" -2" 1 1/4" 2" H290 Foot- Adjustable 2" - 4" 2 1/2" 2" NBS P/N OEM P/N DESCRIPTION H Blade Guard Pin X X X H Foot - Standard (0"-2"Adjustable) X X X X X H Column Guard X X X X H Left Table Assy X X X X H Right Table Assy X X X X H Foot - (2" - 4" Adjustable) X X X X X H Blade Guard Pin (1/4-28) X X H307 N/A Blade Guard Pin - Repair (5/16-18) X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

71 130 TENSION ASSEMBLY AND COMPONENTS H190 Blade Tension Spring H137 Thrust Bearing HOBART H132 Retainer Ring (fits on H128A & H129A Tension Screw) H130 Tension Screw Nut H129A Tension Screw Assembly Length = 6 1/2" H128A Tension Screw Assembly Length = 7 1/2" H120 Handle & Pin NBS P/N OEM P/N DESCRIPTION H Handle & PIn X X X X H128A Tension Screw Assembly Length = 7 1/2" X H129A Tension Screw Assembly Length = 6 1/2" X X X H Tension Screw Nut X X X X X H132 RR-4-8 Retainer Ring X X X X X H137 BB-13-1 Thrust Bearing X X X X X H Blade Tension Spring X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

72 H220 Tension Adjust Handle With Pin TENSION ASSEMBLY AND COMPONENTS Fits: 5700, 5701, 5801, 6614 & 6801 H222 Washer H223 Needle Bearing H222 Washer ALL "X" OUT PARTS ARE NO LONGER AVAILABLE. HOBART NO LONGER AVAILABLE H224 Bushing & Tube Assy H182A Tension Assy NO LONGER AVAILABLE H225 Slot Washer NO LONGER AVAILABLE H227 Spring USE H289A AS A DIRECT REPLACEMENT SOME INDIVIDUAL COMPONENTS STILL AVAILABLE NO LONGER AVAILABLE H229 Cap H230 End Cap Screw & Washer NBS P/N OEM P/N DESCRIPTION H Tension Adjust Handle w/ Pin X X X X X H222 WS Washer X X X X X H223 BN-5-6 Needle Bearing X X X X X H Bushing & Tube Assy X X X X X H Slot Washer X X X X X H Spring X X X X X H229 N/A Cap X X X X X H230 SC End Cap Screw & Washer X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

73 132 H292 Pin-Handle H291 Handle ABS Black Plastic H293 Washer-Tension Assy H294 O-Ring H220 Tension Adjust Handle With Pin - Aluminum TENSION ASSEMBLY AND COMPONENTS Fits: 5700, 5701, 5801, 6614 & 6801 H295 Bushing & Tube Assy H296 Spring H297 Washer - Needle Bearing H223 Needle Bearing H297 Washer - Needle Bearing H289A Tension Assebmly with Black ABS Handle H317A Tension Assebmly with Aluminum Star Handle HOBART H298 Tension Shaft INDIVIDUAL COMPONENTS ALSO AVAILABLE H300 Pin -Tension Shaft H299 Nut & Tube Assy H301 Washer -Tension Assy H300 Pin- Tension Shaft Tension assembly unit is available with ABS or Aluminum Handle NBS P/N OEM P/N DESCRIPTION H223 BN-5-6 Needle Bearing X X X X X H289 A Tension Assy with Black ABS Handle X X X X X H Handle X X X X X H292 RP Pin - Handle X X X X X H293 BB Washer - Tension Assy X X X X X H294 O-Ring X X X X X H Bushing & Tube Assy X X X X X H Spring X X X X X H297 Washer -Needle Bearing X X X X X H298 Tension Shaft X X X X X H299 Nut & Tube Assy X X X X X H300 BP Pin - Tension Shaft X X X X X H301 WS-3-47 Washer - Tension Assy X X X X X H317A Tension Assy with Aluminum Handle X X X X X The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

74 HRK-1 Hobart Repair Kit Models 5212, 5214, 5216 & 5514 H034 Back-Up Plug H033 Back-Up Spring H032 Carbide Back-Up Guide H026V Upper Saw Guide H174 Lower Guide Stud 1/4-28 x 7/8 H049A Blade Cleaner & Spring Assembly H102A Fiber Blade Scraper Assembly HOBART H028V Lower Saw Guide H027 Filler Block - Nylon (Blind Hole) H112 Wheel Cleaner - Fiber Modified HRK-2 Hobart Repair Kit Models 5014, 5016, 5114 & 5116 H014 Blade Cleaner - Nylon H012 Filler Block - Nylon (Through Hole) H015V Lower Saw Guide H013 Wheel Cleaner - Fiber HRK-3 Hobart Repair Kit Models 5013, 5213, 5313 & 5413 H016 Pulley Wiper Stud H002 Upper Filler Block - Nylon HSGB Saw Guide Bearing H023 Guide Bearing Stud H001 Filler Block - Nylon H004 Wheel Cleaner - Fiber H003V Lower Saw Guide H011 HInge Pin H005 Blade Cleaner - Nylon The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

75 134 H113 Blade Cleaner -Steel H026V Upper Saw Guide Hobart Repair Kit Model 5614 H112 Wheel Cleaner - Fiber H174 Lower Guide Stud 1/4-28 x 7/8 H028V Lower Saw Guide H034 Back-Up Plug H049A Blade Cleaner & Spring Assembly - Nylon H027 Filler Block - Nylon (Blind Hole) H033 Back-Up Spring H032 Carbide Back-Up Guide HOBART HRK-5 Hobart Repair Kit Model 5700 H184A Fiber Blade Scraper Assembly H174 Lower Guide Stud 1/4-28 x 7/8 H112 Wheel Cleaner - Fiber H122 Upper Saw Guide & Carbide Plug H183A Blade Scraper Assembly with Fiber Scrapers H121 Lower Saw Guide & Carbide Plug H106 Filler Block - Nylon H184A Fiber Blade Scraper Assembly H174 Lower Guide Stud 1/4-28 x 7/8 HRK-6 Hobart Repair Kit Models 5701, 5801, 6614, 6801 H Upper Saw Guide & Carbide Plug H112 Wheel Cleaner - Fiber H183A Blade Scraper Assembly with Fiber Scrapers H Lower Saw Guide & Carbide Plug H106 Filler Block - Nylon The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment.

76 HRK-7 Hardware Kit Hobart Saws Kit constists of 141 STAINLESS STEEL nuts, bolts, screws and washers in a break resistant plastic container. HOBART QTY DESCRIPTION 6 1/4-20 x 1 HEX HEAD, CAP SCREW 6 1/4-28 x 3/4 HEX HEAD, CAP SCREW 6 1/4-20 x 1/2 FILLISTER, SLOTTED SCREW x 1/4 ROUND HEAD, SLOTTED MACHINE SCREW x 3/8 ROUND HEAD, SLOTTED MACHINE SCREW x 1/4 ROUND HEAD, SLOTTED MACHINE SCREW x 1/2 SOCKET HEAD CAP SCREW HEX NUT 25 #10 SPLIT LOCK WASHER Always Open See what parts we carry for specific machines Search for specific part numbers Search with the OEM number Place Your order Get your tracking number for your order The above described parts are supplied by National Band Saw Company as replacement parts for Hobart equipment. Order at:

77 136 HL322U Upper/ Lower Saw Wheel -Tapered Shaft Hole - Will fit on old style tapered shaft -16"Dia FITS HI-YIELD 16 HL329 Lock Nut HL328 Lock Washer HL327 Tongued Washer HL309 Upper Shaft Bearing Rear HL308 Upper Shaft Bearing Front HL312 Upper Shaft Seal HL321 Shaft Nut HL320 Upper Wheel Shaft Stainless Steel HL323 Lower Wheel Shaft Stainless Steel HL324 Lower Shaft Key HL310 Lower Shaft Bearing Front & Rear HL310 Lower Shaft Bearing Front & Rear HL313 Lower Shaft Seal HOLLYMATIC SAW HL326L Lower Saw Wheel -Straight Shaft Hole -16" Dia Includes Wheel Lock Lever HL332 Frost Catch HL325 Lower Wheel Shaft Pin HL324 Lower Shaft Key HL313 Lower Shaft Seal HL310 Lower Shaft Bearing HL310 Front & Rear Lower Shaft Bearing Front & Rear HL334 Lock Lever Stud HL333 Wheel Lock Lever Don't forget your band saw blades, pages 60 and 61 Bone-In: SB126 Boneless: BK126 5/8".022" HL321 Shaft Nut HL331 Lower Shaft Old Style - Tapered Stainless Steel NBS P/N OEM P/N DESCRIPTION HI-YIELD 16 HL Upper Shaft Bearing-Front X HL Upper Shaft Bearing-Rear X HL Lower Shaft Bearing-Front & Rear X HL Upper Shaft Seal X HL Lower Shaft Seal X HL Upper Wheel Shaft X HL Shaft Nut X HL322U Upper / Lower Saw Wheel -Tapered Shaft Hole X HL Lower Wheel Shaft X HL Lower Shaft Key X HL Lower Wheel Shaft Pin X HL326L Lower Saw Wheel -Straight Shaft Hole X HL Tongued Washer X HL Lock Washer X HL Lock Nut X HL Lower Shaft Old Style X HL Frost Catch X HL Wheel Lock Lever X HL Lock Lever Stud X FITS The above described parts are supplied by National Band Saw Company as replacement parts for Hollymatic equipment.

78 137 National Band Saw, Established1953 FITS HI-YIELD 16 HOLLYMATIC SAW HL315 Wheel Scraper Bracket Assy - Stainless Steel HL301 Wheel Scraper - Fiber HL300 Wheel Scraper Spring HL303 Wheel Scraper Assembly Hardware. 4 Screws, 2 Washers & 2 Nuts Stainless Steel HL314 Wheel Scraper Bracket - Stainless Steel HL301 Wheel Scraper HL304 Blade Scraper HL307 Upper Saw Guide HL307 Upper Saw Guide HL335 Upper Saw Guide Stainless Steel HLRK-1 REPAIR KIT HL305 Lower Saw Guide HL306 Filler Block HL306 Filler Block - Nylon HL305 Lower Saw Guide 1/4-28 Thread O/S HL317 Blade Scraper Bracket Assyembly Stainless Steel HL316 Blade Scraper Bracket - Stainless Steel HL304 Blade Scraper FITS NBS P/N OEM P/N DESCRIPTION HI-YIELD 16 HLRK-1 N/A Repair Kit X HL Wheel Scraper Spring X HL Wheel Scraper - Fiber X HL Wheel Scraper Assy, Screws, Washers & Nuts Stainless X HL Blade Scraper X HL Lower Saw Guide X HL Filler Block - Nylon X HL Upper Saw Guide X HL Wheel Scraper Bracket - Stainless Steel X HL Wheel Scraper Bracket - Assembly X HL Blade Scraper Bracket - Stainless Steel X HL Blade Scraper Bracket - Assembly X HL Upper Saw Guide - Stainless Steel X HL Lower Saw Guide - Stainless Steel X HL336 Lower Saw Guide 1/4-28 Thread O/S Stainless Steel Don't forget your band saw blades, page 134 Bone-In: SB126 Boneless: BK126 5/8".022" The above described parts are supplied by National Band Saw Company as replacement parts for Hollymatic equipment. Order at:

79 138 FITS HI-YIELD 16 HL341 Small Spring HL340 Large Spring HL339 Plunger HL338 Ball Knob fits Thickness Gauge HL311 Guide Rod Lock Knob HOLLYMATIC SAW HL337 Toggle Plate HL330 On-Off Push Knob Red Don't forget your saw blades. The SB126 for Bone-In or the BK126 for boneless cutting. Hollymatic Hi Yield " HL318 Table Roller 5/8".022" NBS P/N OEM P/N DESCRIPTION HI-YIELD 16 HL Guide Rod Lock Knob X HL Table Roller X HL On-Off Push Knob Red X HL Toggle Plate X HL Ball Knob X HL Plunger X HL Large Spring X HL Small Spring X FITS The above described parts are supplied by National Band Saw Company as replacement parts for Hollymatic equipment.

80 139 National Band Saw, Established For more parts, Specials, Sales, Discounts and Promotions! Check your order, item history and track your packages HOLLYMATIC SAW COUPON CODE: SAW15 Save 15% off entire purchase of saw parts at One time use per account Valid 1/2018 to 12/31/18 nationalbandsaw nbsparts.com/blog nationalbandsaw nationalbandsaw Order at:

81 TR20 Tension Handle Upper Shaft, Hanger and Wheel Components TR21 Tension Gauge Housing Fits ST-200 9" Wheel TR20 Tension Handle TR21 Tension Gauge Housing Fits ST " Wheel 140 TR22 Tension Gauge Spring TR22 Tension Gauge Spring TR39 Rod & Indicator 7" Long TR24 Tension Gauge Pin TR25 Upper Wheel Hanger TR30 Tension Guide -Left TR31 Tension Guide -Right TR23 Rod & Indicator 8 1/4" Long TR24 Tension Gauge Pin TR25 Upper Wheel Hanger TR31 Tension Guide -Right TR30 Tension Guide -Left TR41 Wheel S 14" Wheel TORREY TR27 Nut TR29 Washer TR53 Upper Shaft TR26 Adjusting Screw TR36 Upper Main Bearing- -Rear TR35 Upper Main Bearing -Front TR54 Upper Shaft Seal TR52 Retaining Ring TR27 Nut TR26 Adjusting Screw TR29 Washer TR28 Upper Shaft NBS P/N OEM P/N DESCRIPTION ST-200 ST-295 TR Upper Main Bearing X TR Retaining Ring X TR Upper Wheel X TR Tension Handle X X TR Tension Gauge Housing X X TR Tension Gauge Spring X X TR Rod & Indicator 8 1/4" Long X TR Tension Gauge Pin X X TR Upper Wheel Hanger X TR Adjusting Screw X X TR Nut X X TR Upper Shaft X TR29 Washer X X TR Tension Guide Left X X TR Tension Guide Right X X TR Upper Main Bearing - Front X TR Upper Main Bearing - Rear X TR Rod & Indicator 7" Long X TR Wheel Scraper Arm X TR Retaining Ring X TR Upper Shaft X TR Upper Shaft Seal X TR18 Upper Wheel 14" TR09 Upper Main Bearing TR09 Upper Main Bearing TR10 Retaining Ring The above described parts are supplied by National Band Saw Company as replacement parts for Torrey equipment.

82 141 National Band Saw, Established1953 Upper Shaft and Hanger Components for ST-355 Fits ST " Wheel TR24 Tension Gauge Pin TR31 Tension Guide -Right TR55 Upper Wheel Hanger TR42 Scraper Arm 18" Wheel TORREY TR30 Tension Guide -Left TR58 Screw, Wheel Adjusting TR27 Nut TR29 Washer TR28 Upper Shaft TR56 Tension Gauge Indicator TR22 Tension Gauge Spring TR09 Upper Main Bearing TR09 Upper Main Bearing TR10 Retaining Ring NBS P/N OEM P/N DESCRIPTION ST-355 TR Upper Main Bearing X TR Retaining Ring X TR Tension Gauge Spring X TR Tension Gauge Pin X TR Nut X TR Upper Shaft X TR29 Washer X TR Tension Guide Left X TR Tension Guide Right X TR Scraper Arm 18" X TR Upper Wheel Hanger X TR Tension Gauge Indicator X TR Wheel Adjusting Screw X The above described parts are supplied by National Band Saw Company as replacement parts for Torrey equipment. Order at:

83 142 Lower Shaft Components and Wheel Fits ST-200 9" TR12 Retaining Ring TR11 Lower Main Bearing TR11 Lower Main Bearing TR32 Key TR10 Retaining Ring TR33 Lower Wheel Shaft TR40 Lower Main Bearing TR40 Lower Main Bearing TR54 Lower Shaft Seal TORREY Fits ST " ST " TR29 Washer TR27 Nut TR19 Lower Wheel 14" Don't forget your saw blades. SB116 for 116" or SB120 for 120" for Bone-In cutting. The BK116 or BK120 for Boneless Torrey " Torrey ST " Torrey ST " NBS P/N OEM P/N DESCRIPTION ST-200 ST-295 ST-355 TR Retaining Ring X TR Lower Main Bearing X X TR Retaining Ring X X TR Lower Wheel X TR Nut X X TR29 Washer X X TR Key X X TR Lower Wheel Shaft X X TR Lower Main Bearing X TR Lower Shaft Seal X The above described parts are supplied by National Band Saw Company as replacement parts for Torrey equipment.

84 143 National Band Saw, Established1953 TR08 Upper Saw Guide TR44A Wheel Scraper Bracket Assy TR43 Wheel Scraper Bracket TR02 Lower Saw Guide TR01 Filler Block - Fiber TR07A Blade Scraper Assy TR06 Blade Scraper Spring TR05A Wheel Scraper Assy TORREY TR08 Upper Saw Guide TRRK-2 REPAIR KIT TR03 Scraper - Fiber TR04 Wheel Scraper Spring TR02 Lower Saw Guide TR03 Scraper - Fiber TR01 Filler Block TR03 Scraper TR37 Gauge Rod Fits ST-295 Dia 1", L=14 1/2" TR38 Gauge Locking Lever TR16 Plunger TR47 Gauge Rod fits ST200 Dia 1", L=10 1/2" TR13 Carriage Wheel Bearing This bearing is pressed into steel wheel on carriage TR50A Carriage Wheel Assy TR15 Slide Bar Lock Knob TR14 Gauge Plate Spring NBS P/N OEM P/N DESCRIPTION ST-200 ST-295 ST-355 TR Filler Block - Fiber X X X TR Lower Saw Guide X X X TR03 N/A Scraper - Fiber X TR04 N/A Wheel Scraper Spring X TR05A Wheel Scraper Assy X TR06 N/A Blade Scraper Spring X TR07A N/A Blade Scraper Assy X TR Upper Saw Guide X X X TR13 N/A Carriage Wheel Bearing X X TR14 N/A Gauge Plate Spring X TR Slide Bar Lock Knob X TR16 N/A Plunger X TR17 N/A Gauge Plate Bushing X TR Gauge Plate Rod X TR38 N/A Gauge Locking Lever X TR Wheel Scraper Bracket X X TR44A Wheel Scraper Bracket Assy X X TR Gauge Rod 10 1/2" X TR50A Carriage Wheel Assy X X TR Rubber Pad (Black Rubber) X TR Rubber Pad (Black Rubber) X TRRK2 N/A Repair Kit X X X TR17 Gauge Plate Bushing TR59 Rubber Pad for ST-295 The above described parts are supplied by National Band Saw Company as replacement parts for Torrey equipment. TR60 Rubber Pad for ST-200 Order at:

85 144 AVAILABLE WHILE SUPPLIES LAST Extremely Low Quantities T19 Blade Scraper Assy T17 Blade Scraper Spring T18 Blade Scraper - SET ONLY T09 Wheel Cleaner T04 Wheel Cleaner TOLEDO T53 Upper & Lower Wheel Model " Blade 16" Diameter NBS P/N OEM P/N DESCRIPTION T Wheel Cleaner X X T Wheel Cleaner X X T Blade Scraper Spring X X T Blade Scraper - SET ONLY X X T19 Blade Scraper Assembly X X T Upper or Lower Wheel Model " Blade X The above described parts are supplied by National Band Saw Company as replacement parts for Toledo equipment.

86 145 National Band Saw, Established1953 NBS P/N OEM P/N DESCRIPTION TSGB Saw Guide Bearing X X X X T Filler Block X T11 Upper Saw Guide T Lower Saw Guide X X X T Upper Saw Guide X X X T Filler Block X X X T34 R-1236 Filler Block Screw X X X T10 Lower Saw Guide T12 Filler Block TSGB Saw Guide Bearing T34 Filler Block Screw Stainless Steel TOLEDO AVAILABLE WHILE SUPPLIES LAST T01 Filler Block TRK-1 Toledo Repair Kit Models 5201, 5206 & 5300 T11 Upper Saw Guide T19 Blade Scraper Assembly T09 Wheel Cleaner TSGB Saw Guide Bearing T12 Filler Block AVAILABLE WHILE SUPPLIES LAST Extremely Low Quantities WELLS Wells / Jarvis Buster P-760 or HD080 WGW-1A Saw Guide & Filler Assembly WGW-3 Filler Block S & L WGW-2 Pinion Gear 5/8" Bore Plastic NBS P/N OEM P/N DESCRIPTION WGW-1A N/A Saw Guide & Filler Assembly WGW (6307 5/8) Pinion Gear 5/8" WGW-3 Filler Block The above described parts are supplied by National Band Saw Company as replacement parts for Toledo equipment. Order at: