IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS

Size: px

Start display at page:

Download "IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS"

Aileen Hodges
5 years ago
Views:

1 - Stem! IMPORTAT SAFETY IFORMATIO. READ AD FOOW A SAFETY ISTRUCTIOS IMPORTAT SAFETY IFORMATIO. READ AD FOOW A SAFETY ISTRUCTIOS. Before wiring to power supply and during servicing or relamping, turn off power at fuse or circuit breaker. All servicing or relamping must be performed by qualified service personnel. Product must be grounded to avoid potential electric shock or other potential hazard. Product must be at locations and at heights and in a manner consistent with its intended use, and in compliance with Electrical Code and local codes. SAVE THESE ISTRUCTIOS FOR FUTURE REFERECE..9" 0.79".9. 0." 0.9" 0.9" 0.67".69" 7.9. Φ0.7" Φ0.7" Φ0.7" Φ0." Φ.09" Bracket Power Box Step Secure bracket to level surface with mounting hardware that is sufficient to support weight of ED fixture and power box. Step Secure power supply box to bracket with provided screws. METEOR IGHTIG P:..060 F: IH0T0-6 V.0 Page of 7

2 - Stem 90W / 0W 0W / 00W Step For WS-90 and WS-0: Open cover on back of fixture head. Fasten stem to cover with provided hardware. For WS-0 and WS-00: Fasten stem to provided adapter on back of fixture head. Dimming cable AC cable AC / Dimming cable: standard length is 6ft. Step Insert the other side of the stem through the middle hole on the bottom side of the bracket. Use a lock nut to secure the stem onto the bracket. Step Secure lower bracket to main bracket with power box with provided self-locking fastener and screw. Step 6 Connect power input wires with corresponding black/white/green wires using attached connector at the end of the wires. METEOR IGHTIG P:..060 F: IH0T0-6 V.0 Page of 7

3 - Stem *Cable length provided is.7x of ordered stem length. ength adjuster Step 7 Assemble the stabilizer cables ( pcs) on each end and length adjuster on the other end. Feed cable through the mounting corners and tighten adjusting screw. Ensure fixture is secure before adjusting height of the cable. METEOR IGHTIG P:..060 F: IH0T0-6 V.0 Page of 7

4 Standard 0-0V (WS-90/WS-0) G Black White Brown Blue 0-0V Dimmer Green Standard 0-0V (WS-0/WS-00) G Black White Brown Blue 0-0V Dimmer Green METEOR IGHTIG P:..060 F: IH0T0-6 V.0 Page of 7

5 Superior 0-0V (WS-90/WS-0) SPV Driver 0-0V wire 0-0V Dimmer Superior 0-0V (WS-0/WS-00) SPV Driver V wire ED Fixture - + SPV Driver 0-0V Dimmer METEOR IGHTIG P:..060 F: IH0T0-6 V.0 Page of 7

6 (WS-90/WS-0) Driver In Out In Out COECTIO -PI XR Common Signal - PI PI I XR Socket OUT Signal + PI PI PI *The last fixture has to be terminated with a Terminator (by others). is connected using a daisy-chain methodology where the source connects to the input of the first device, the output of the first device connects to the input of the next device, and so on. METEOR IGHTIG P:..060 F: IH0T0-6 V.0 Page 6 of 7

7 (WS-0/WS-00) Driver In Out Out In In Out Driver COECTIO -PI XR Common Signal - PI PI I OUT Signal + PI XR Socket PI PI *The last fixture has to be terminated with a Terminator (by others). is connected using a daisy-chain methodology where the source connects to the input of the first device, the output of the first device connects to the input of the next device, and so on. METEOR IGHTIG P:..060 F: IH0T0-6 V.0 Page 7 of 7

When using electrical equipment, basic safety precautions should always be followed including the following:

When using electrical equipment, basic safety precautions should always be followed including the following: INDUSTRIAL INSTALLATION INSTRUCTIONS Illumina BS100LED2FT-PLUS EACH MODEL NUMBER CONSISTS OF THE FOLLOWING: SERIES / LENGTH / OPERATION / LUMENS / COLOUR TEMP. / INPUT SERIES: LENGTH: OPERATION: BS100LED2PLUS