Full Automatic Coffee Capsule Packaging Machine
|
|
- Claud Campbell
- 6 years ago
- Views:
Transcription
1 Full Automatic Coffee Capsule Packaging Machine 1
2 Main technical parameters Item Punching frequency Technical parameters 7-15times/min, 1 5pcs/time Capacity 3600pcs/hour(according 5pcs/t,12t/m) Forming area (mm 2 )( 最大 ) Traction stroke Coffee capsule shape mm,Max:160mm (designed according to user requirements) PP mm Packaging material Composite aluminum film mm Reel diameter 70 76mm Heating power Total power Forming :3KW Sealing :1.5KW 10 Kw Pump capacity >0.3m 3 pressure : Mpa Mold cooling Tap water or recycling water 60L/h Size (L W H) Weight 1600kg 2
3 Working principle 1, transmission: This machine with the 2.2KW motor as the driving force, through the reducer speed down, the chain clamping servo traction, tension feeding, the PP plastic and PTP foil as equidistant intermittent motion 2, the preheating molding: When PP plastic sheet after heating box into the preheated mold, preheating of the upper and lower heating plate is combined under the action of a cylinder, at the same time, PP plastic sheets, preheating, guide plate by the cam rise while pressing the plastic films, at the same time the filtration pressure reducing valve of compressed air, through the air inlet valve timing opening (controlled by encoder) into the mold, the PP plastic positive pressure forming 3, feed: In the PP heating is pressing for a specific shape, with special mechanical device on the plastic sheet automatically placed into the blister press into position, during which the powder feeder quantitative coffee powder molding blister. 4, heat sealing: PP blister complex aluminum foil into the heat sealing mould, with flat pressure sealing, save the good sealing effect, smooth, plate material. 5, traction: Using the chain holding traction, running direction, a chain rail, ensure smooth running correctly. Chain with servo motor control, ensure the chain traction in synchrony with the machine running. 6, the blanking Complex traction chain will be heat sealed into the punching die, blanking die down section will automatically fall into the conveyor belt, finished product output. After the finished product automatic blanking output. 3
4 Electrical list: Name Model Quantity Brand Interface GT1150-QBBD-C 1 MITSUBISHI Programmable FX1N-24MT 1 MITSUBISHI controller output module FX2N-8EYR 1 MITSUBISHI 485communication module FX1N-485BD 1 MITSUBISHI Frequency converter FR-S520SE-1.5KM-CHR 1 MITSUBISHI Servo amplifier MR-J3-100A 1 MITSUBISHI Servo motor HC-SP102 1 MITSUBISHI encoder E6B2-CWZ6C 1 OMRON Circuit breaker OSMC32N1PC3 1 Schneider OSMC32N1PC10 4 Schneider OSMC32N2PC10 1 Schneider OSMC32N3PC10 1 Schneider AC contactor LC1-D1810M7N 1 AC220V Schneider Miniature relay RXL4A06B4BD 3 DC24V Schneider Transformer 380V/220V 3phase/1KW 1 customized 220V/127V 50W 1 customized Servo motor reducer PG Button XB2-BA31C 1 Schneider XB2-BA41C 1 Schneider Emergency stop XB2-BS542C 1 Schneider switch Relay group G6B-4BND 2 Omron Proximity switch E2E-X3D1N 2 Omron Switching power S Solomon 4
5 Solenoid valve 4V Airtic Solid state relay SSD-25DA 3 ZheJiang AOYI Benchmarking photoelectric BZJ Dongtou betterlife Note: the electrical component models are subject to change without notice Pneumatic components list Model Name Quantity Specification SDA50 30-B SDA20 30-B BFR BM52O ASC100-6 PL BuMM PZA PT PL PC Series cylinder Heating box cylinder Heating box cylinder FRL (oil mist filter, relief pressure valve, filter) Solenoid valve Throttle valve Throttle valve Throttle valve A one-way valve Double joint Copper joints Four way Tee Bend head Muffler Straight through Tube 2 D G1/4 joggle 3 2 G1/4-8 4 M5-6 1 G1/4 joggle 3 G1/4 joggle 17 1 ф8socket 4 7 G1/4joggle socketф8 4 4 M10 1 接口 插口 ф8 16m Note: pneumatic component models are subject to change without notice. 5
6 Quotaiton(EXW): Remark: 1) The quotation: The quotation is based on EXW; the quotation includes a set of random die, a coffee powder servo loading system. The servo filling system serve five servo head, a feeding for five cups of coffee capsules 2) Delivery time: 70-85days of factory delivery time upon the receipt of the 50% deposit and 6
7 confirming all the technical details. 3) Payment terms: By T/T 50% as the deposit, the balance be paid by T/T before shipment; 4) Installation and debug: This machine will be installed in the factory and transport to you in one unit. If need our technician go to your factory to testing the machine, the buyer need to pay for all of travel charges for our technicians, including the visa fee, air tickets, the local accommodation, the food, the local traffic charges and also need to pay for our technicians' salary,etc. We will send one engineer to debug till the machine can run normally and start to produce. It would be better that your site come to our factory for testing, we will teach you how to operating, adjust and modify the machine according your requirments. The buyer need provide 400pcs cups and foils for testing. 5) Warranty: We guarantees the quality of the products for 12 months and electrical products 6 months since the date of installation. During the warranty period, we can provide the free spare parts which broken in 1 year, but the buyer should pay the travel charges from our company to their address; If the defaults are aroused by the defaulted operations, or the buyer needs the technical assistance for the processing problems, the buyer should be responsible for all the cost. 6) Valid: The offer is valid 30 days. 7
8 8
Work Professional with professional machines
QUTATION Computer Panel Saw Date : 2015/04/02 Specialized in Panel Saw from SOSN Model : SOSN-338 Computer Panel Saw 338 means Length of cutting.cutting length is 3800 mm Machine Specification : CAPACITY
More informationDouble Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS
Offer date:2017/2/8 Quotation No.VM3018AFMF20170208A Double Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS Stock Machine for Index: A.) General Machine Description
More informationSJSZ 80/173 Foam Board Extrusion Line
Date: Jan. 27, 2018 SJSZ 80/173 Foam Board Extrusion Line 1. Equipment List&Price Item Description Unit Price Qty (USD) (Set) 1 SJSZ 80/173 Double Screw Extruder 1 Total Price (USD) 2 Mould - - - 3 Mould
More informationAgenda 10/4/2016. Servo Technology Experience 2016 TO (Nashville) SERVE, TO STRIVE, WITHOUT COMPROMISE.
Servo Technology Experience 2016 (Nashville) Agenda Why transfers? Transfer Technology History How Transfer s Integrate with Presses Transfer Tooling Options Auxiliary Tooling & Die Options New Technologies
More informationCNC Hydraulic Punching Machine for Plates Model PP103B
CNC Hydraulic Punching Machine for Plates Model PP103B 1. Technical Specification of PP103B 1) Max. punching force: 1000kN 2) Max. size of workpiece: 775 1500mm 3) Thickness of workpiece: 5 ~ 25mm 4) Max.
More informationBATTERY RECYCLING PLANT AA; AAA; AAAA; 4.5V; 9V
Bulgarian Chamber of Commerce and Industry Registration Number 1017244600 / 24.02.1992 PLASTIC RUBBER TIRES RDF COPPER ALUMINUM CABLES ELECTRONIC AND ELECTRICAL WASTE RECYCLING EQUIPMENT BATTERY RECYCLING
More informationDie cutting and stripping machine with hot foil stamping. model Brausse SIGNA 1050F Hybrid
Die cutting and stripping machine with hot foil stamping model Brausse SIGNA 1050F Hybrid All machines installed by Brausse Europe will have the VinTechMa label. www.vintechma.com 1 Highlights of all Brausse
More informationQuotation of Roof Roll Forming Machine (YX )
Quotation of Roof Roll Forming Machine (YX30-200-1000) Date:2015-02-15 To:Mr.Dimitry Dolidze Company:DOLIMEX INTERNATIONAL CO., LIMITED Tel: Fax: Email: Country:Georgia From:Miss Chen Company:Friendship
More informationMetal Roof Tile Production Line Monterey (21 mill stands)
Ruscana Engineering Group Russia, 142143, Moscow region, Podolsk city, village Bykovo, Centralnaya Street, 6 tel./fax: (499) 400-40-63, tel.: (495) 660-16-25, 721-69-91 www.ruscana-engineering.com E-mail:
More informationHeavy-Duty Safety Interlock Switch with Guard Door Locking
C R US Conforms to EN1088, EN60947--1, EN292, EN60204-1 UL and C-UL listed TL8018- Heavy-Duty Safety Interlock Switch with uard Door Locking High locking force of,00 N (1,236 lb.) locks guard door shut
More informationPneumatic Cylinder. 3I Double-acting type. 3Q Single-acting type (spring returned type)
Pneumatic Cylinder State of the art in actuation, Tomoe cylinders offer compactness, lighter weight, and higher output torque. I Double-acting type Q Single-acting type (spring returned type) Features
More informationMetal Roof Tile Production Line «Adamante» (19 mill stands)
Ruscana Engineering Group Russia, 142143, Moscow region, Podolsk city, village Bykovo, Centralnaya Street, 6 tel./fax: (499) 400-40-63, tel.: (495) 660-16-25, 721-69-91 www.ruscana-engineering.com E-mail:
More informationFixed Asphalt Mixing Plant (120TPH) =====
===== To: Quotation # Req. Ref. Date Issued: Validity Period: Prepared By: Number of Pages: NA 30 Days Prof. Dr. R. B. Crawford 2 Column Number Row No. 2 3 4 5 6 Product or Service. Asphalt Mixing Plant
More informationVERTICAL FORM FILL SEAL MACHINES
VERTICAL FORM FILL SEAL MACHINES AUTOMATIC PACKAGING MACHINES 2 Vertical Form, Fill and Seal machines AVM AVM vertical Form, Fill and Seal (VFFS) machines automatically form a bag from a flat roll of film,
More informationHL PharmTech. Automatic Blister Packing Machine. HLB Series
EBSEOS GmbH Pharmaceutical Machinery & Services Industriestrasse 12 79664 Wehr Tel. ++49 (0)7762 80 68 966 Fax. ++49 (0)7762 80 68 967 HL PharmTech Automatic Blister Packing Machine HLB Series Main Features
More informationPneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
More informationFULL AUTOMATIC DUCT LINE Model: ALV-U1530 U-TYPE
FULL AUTOMATIC DUCT LINE Model: ALV-U1530 U-TYPE CATALOGUE A The main purpose of the equipment, performance and featureserror! Bookmark not defined. B The basic parameters of the equipment, process flow...
More informationC purlin automatic adjustable roll forming machine. Technical Specification
C purlin automatic adjustable roll forming machine Ⅰ: General properties Technical Specification Maximum production speed: not less than 15 meters per minute excluding cutting and punching); Bending precision:
More informationLinear Commutated Meat Filler IMC-CMF100 INTERNATIONAL MACHINE CONCEPTS WELCOMES YOU TO YOUR NEW MACHINE
Linear Commutated Meat Filler IMC-CMF100 INTERNATIONAL MACHINE CONCEPTS WELCOMES YOU TO YOUR NEW MACHINE Operation Manual: Date 2017. Version 1. Serial Number 1 CONTENTS Chapter 1 Machine Description 1.1
More informationPneumatic Actuators. TGA Specifications
Pneumatic Actuators The TGA model is a double-action pneumatic actuator perfect for on/off control of the various types of butterfly valves. With an optional positioner, it can also be used for flow rate
More informationTECHNICAL PRODUCT DOCUMENTATION
Page: 1 POSITIONER TYPE A703 Page: 2 CONTENTS 1. APPLICATION 3 2. TECHNICAL DESCRIPTION 3 2.1. Construction 3 2.2. Working rules 4 2.3. Dimensions of the positioner and types of performances 6 3. TECHNICAL
More informationCorrugated paper: 4mm. Max punching speed: 7500 sheets/hour Max stripping speed: 6500 sheets/hour
Commodity name: HIGH ABILITY FULLY AUTOMATIC DIE-CUTTING MACHINE (Paper feeder, die-cutting unit, waste removal unit, delivery station, and electrical section) Model: CM-1050-SE Specifications: Max paper
More informationDie cutting and creasing machine with blanking and stripping device. model Brausse 1060ER
Die cutting and creasing machine with blanking and stripping device model Brausse 1060ER 1 Highlights of all Brausse machines Very complete configuration Extremely smoothly running due to the unique index
More informationJBI Docupunch P33 Automatic Punch
JBI Docupunch P33 Automatic Punch Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com TABLE OF CONTENTS SECTION I: INSTALLATION & TESTING: 1) Uncrating, Inspection & removal
More informationStandard specifications BA006NFE01
Standard specifications BA006NFE01 1st Edition : ###### 2nd Edition : January 20, 2015 March 29, 2018 KAWASAKI HEAVY INDUSTRIES, LTD. ROBOT DIVISION Materials and specifications are subject to change without
More informationMTAB. MACHINING CENTERS
MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,
More informationGZPK0222 SERIES HIGH SPEED ROTARY TABLET PRESS
GZPK0222 SERIES HIGH SPEED ROTARY TABLET PRESS A brief introduction of GZPK2000 series high speed rotary tablet press 1) It is suitable for use in the pharmaceutical industry (except materials that are
More informationINDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts
INDEX Agitating device for pin hopper.----------------------------------------- 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts.-----.----------.--..--
More informationOil Lubricating Device
NANJING BIJUR MACHINERY PRODUCTS LTD. Oil Lubricating Device Contents I. FL Series Lubrication And Regulating Oil Stations 1. Application 2. Order Numbering 3. Application environment 4. Principle 5. Technical
More informationFast down 110mm /s. 16 Gross weight 5400 kg 17 Overall size(mm) LxWxH 2780x1725x2550 With plastic covers Transportation:1/3x40 HQ CONTAINER
CNC HYDRAULIC PRESS BRAKE MODEL : WE67K-63/2500 TECHNICAL FEATURES 1 Type Hydraulic CNC electro-hydraulic synchro 2 Working force 63 T 3 Distance between frames 2050 mm 4 Throat depth 250 mm 5 Open height
More informationTECHNICAL FEATURES MIKRO 110
TECHNICAL FEATURES MIKRO 110 Automatic forming machine from coil, uni-directional, programmable, CNC, designed for the production of common stirrups as well as the re-bar bending. Working range 2 6 2 8
More informationInjection Mould Machine
Injection Mould Machine PanAsia Exports (HK) Limited Room 1208-1209, B Block, Feng Xing Plaza, No. 242 Tian He Road, Tian He District, Guangzhou, 510620, China Tel: (8620) 28383510 Fax: (8620)28383516
More informationGRANULES AGGLOMERATE PRODUCTION PLANT
MAGMA MACCHINE srl OFFER FOR: MR C02 GRANULES AGGLOMERATE PRODUCTION PLANT INCLUDED OF: Support plant structure Dosing and pouring system for prepolymer Activation system for adhesive with water Mixer
More informationINDEX. PAGE Adjustment mechanism for radial position of block on rotating
INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,
More informationDIRECTIONAL AND FLOW CONTROL VALVE WITH AMPLIFIER WITH DIGITAL SETTING UNIT (EHD3A SERIES) FEATURES APPLICATION EXAMPLES CAUTION
DIRECTIONAL AND FLOW CONTROL VALVE WITH AMPLIFIER WITH DIGITAL SETTING UNIT (EHD3A SERIES) CAUTIONS ON USE FEATURES 1. The valve enables easy 2-speed control and shockless control. 2. A digital setting
More informationIntegrated Robotized Blister Line INTEGRA 320. Liquids Solids Creams Packaging ENGLISH
INTEGRA 320 Integrated Robotized Blister Line Liquids Solids Creams Packaging ENGLISH INTEGRA 320 Integrated Robotized Blister Line A concentrate of Italian technology Robotized Blister Line, integrating
More informationOPERATION INSTRUCTIONS GFA-W-150\300\500\1000
OPERATION INSTRUCTIONS HORIZONTAL SELF-SUCTION FILLER SERIES GFA-W-10\300\00\1000 Please operate in accordance with the instructions strictly. CONTENTS Overview Maintenance and Service Application Replacement
More informationQuotation. With in 45 days after receipt the payment 30%TT as deposit, and 70%TT balance before shipping Picture
TEL: +86-13589331224 FAX: +86-532-83196289 Web.: http://www.my-autoparking.com Email: victoria.zhang@qdmy-parking.com ADD: #2377, Lingang Road, Huangdao District, Qingdao City, Shandong, China (Mainland)
More informationR-SERIES MULTI-AXIS INDUSTRIAL ROBOTS
Automation Solutions R-SERIES MULTI-AXIS INDUSTRIAL ROBOTS COMPACT MULTI-AXIS INDUSTRIAL ROBOTS FOR COMPLEX PROCESSING TASKS Reduce Manufacturing Costs Improve Production Time Increase Throughput Engineering
More informationHeavy-Duty Hinge-Operated Safety Interlock Switch (Pneumatic) Cam limits guard door opening to 5 degrees before safety contacts are opened.
Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 Description PHP6009 Heavy-Duty Hinge-Operated Safety Interlock Switch (Pneumatic) The PHP6009 is similar to the conventional HP6009 except that it gives
More information100% OUTSIDE AIR MAKE-UP UNITS WITH DISCHARGE TEMPERATURE CONTROL & c.pco DIRECT DIGITAL CONTROL MODULE
100% OUTSIDE AIR MAKE-UP UNITS WITH DISCHARGE TEMPERATURE CONTROL & c.pco DIRECT DIGITAL CONTROL MODULE Start-up must be performed by a trained, experienced service person. The following general start-up
More informationCNC Tool Room Milling Center MODEL: VM-760
CNC Tool Room Milling Center MODEL: VM-760 MACHINE FEATURES 7.5HP high torque spindle motor, low noise and vibration BT40/CAT40/DIN40 6000 rpm spindle speed, ( Optional 8,000, 10,00, 12,000 or 15,000rpm
More informationSoftgel Machines. SGM607i SGM610i SGM612i SGM812i SGL107 SGL207 SGM407 PRODUCTION AND LABORATORY SCALE
Softgel Machines PRODUCTION AND LABORATORY SCALE SGL107 SGL207 SGM407 SGM607i SGM610i SGM612i SGM812i WHAT WE STAND FOR We strive to provide every customer, no matter their size, with leading technology,
More informationMICRO EJECTORS. Micro ejector single unit (without solenoid valve) ME. Micro ejector with solenoid valve DC24V. Block-off plate ME MA-BP
Micro Ejector Order Codes Manifold Order Codes Micro ejector single unit (without solenoid valve) ME Body model nozzle diameter : Maximum flow rate on vacuum side 03 0.3 : 3.0R/min. [0.012in., 0.106ft.
More informationGeneral Specification
General Specification OF NV-100mmSG (Mod.2) Single Screw Extruder Freesia Macross Corporation April 2009 1. Type General purpose single screw extruder 2. Capacity 300-500 kg/h (ABS pellet) 3. Dimension
More informationTable of Contents. AMO series quantitative pressured centralized lubricating system 1. Illustration of AMO motor driven lubricating system 1
Table of Contents AMO series quantitative pressured centralized lubricating system 1 Illustration of AMO motor driven lubricating system 1 AMO motor driven thin oil lubricating pump MO type pressured thin
More informationROBOTICS SAFETY MOTION & CONTROL. SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL
MOTION & CONTROL ROBOTICS SAFETY SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL Cedarburg Headquarters 7400 Quail Court P.O. BOX 860 Cedarburg, WI 53012 Weston Branch 4601-A Camp Phillips Rd Weston, WI 54476
More informationOnline Auction Of Production Equipment & Stores Items From A Major Automotive Parts Manufacturer, Available Due To Closure Of Facility.
Major Automotive Parts Manufacturer Sale 2 (Ends: 2018-10-25 14:00:00.0) Online Auction Of Production Equipment & Stores Items From A Major Automotive Parts Manufacturer, Available Due To Closure Of Facility.
More informationCircuit of directional control valve and regulator. Simplifying circuit design. Space saving and piping. work eliminated. Automating pressure control
Port Electro-Pneumatic Proportional Valve Series 000/000 Capable of actuating a cylinder and performing analog control of pressurization alone can be used to switch and actuate a cylinder and to perform
More informationAIR PREPARATION PRODUCTS F.R.L. 3 PCS Combination F.R.L. 2 PCS Combination Filter - Regulator
AIR PREPARATION PRODUCTS 2.1 F.R.L. 3 PCS Combination 42-43 42-43 2.2 F.R.L. 2 PCS Combination 44-45 2.3 Filter - Regulator 46-47 2.4 Filter 48-49 44-45 46-47 48-49 2.5 Pressure Regulator 50-51 50-51 2.6
More informationSingle-Head Paste/Liquid Filling Machine. Model: G1WGD Operational Manual
Single-Head Paste/Liquid Filling Machine Model: G1WGD-1000 Operational Manual SEMI-AUTOMATIC PISTON FILLING MACHINE Operational Manual 1. Principle and Property 2. Specifications 3. Safety Operation 4.
More information10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
More informationSubject: Pneumatic Training Kit with portable Air Compressor
MSME TOOL ROOM: HYDERABAD (CENTRAL INSTITUTE OF TOOL DESIGN) Balanagar, Hyderabad 500 037 TEL.NO.23772747, 23776168 FAX No.0-4023772658 E-mail:citdpurchase@citdindia.org Visit us: www.citdindia.org. TENDER
More informationRAPIDMIX 400CW. Length of Machine (19.5m) Length when erected Width of Machine 9-10 (3.00 m) Width Same
Machinery Manufacturers to the Concrete Industry RAPIDMIX 400CW The Rapidmix 400CW has been designed to be totally mobile and completely self-contained with its own power source. It is also completely
More informationMechanical power cylinder
Attaining thrust equivalent to a hydraulic cylinder -- with air pressure alone! New product Mechanical power cylinder MCP Series Mechanical power cylinder MCP Series CC-958A 1 Realize high thrust at any
More informationDehydrators - Technical Characteristics and Pricelist
2018 Dehydrators - Technical Characteristics and Pricelist Blue Spark Systems Bucharest, Romania 2/2/2018 1. Basic information 1.1. General characteristics All the models have these basic characteristics.
More informationAstroJet TM 1000/1000P Inkjet Printer. Parts Manual
AstroJet TM 1000/1000P Inkjet Printer Parts Manual This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information
More informationTG-S Specifications TG-12S Rc3/8. 6 to 20
Pneumatic Actuators The TG-S type spring return pneumatic actuator is suitable for on/off control for medium and large sized valves. With an optional positioner, it can also be used for flow control. Air
More information2 POST LIFT INSTALLATION MANUAL
SCT OPTOELECTRONIC TECHNOLOGY(SHANGHAI)CO,LTD 2 POST LIFT INSTALLATION MANUAL ATL-YP2-40 (SCT-6140B) WARRANTY Worker must read the manual detailed Bad use can hurt people and the car SCT OPTOELECTRONIC
More information219mm X 9.0mm HF ERW Tube Mill Line
219mm X 9.0mm HF ERW Tube Mill Line ES-11216 1. Outline :114.3-219.1ERW pipe mill is used to produce pipes in accordance with API-5L /API-5CT Standard, which includes gas& oil delivery pipes, oil casting
More information7,15 436, Bore , ,12 Compression ratio. 17 Wet weight
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 7,15
More informationNDM3 Series. Molded Case Circuit Breaker. Shanghai Liangxin Electrical CO., LTD.
Shanghai Liangxin Electrical CO., LTD. - Liangxin Electrical - All rights reserved Address: No. 66 eng An Road, Pu Dong New District, Shanghai Post code: 07 Tel: 6--479 Fax: 6--5675966 E-mail: client@sh-liangxin.com
More informationInstruction Manual. Low Profile Lift Table
Instruction Manual Low Profile Lift Table Note: Owner/Operator must read and understand this instruction manual before using the low profile lift table. THANK YOU VERY MUCH FOR SELECTING OUR PRODUCT. THIS
More informationFisher 2506 and 2516 Receiver Controllers
2506/2516 Receiver Controllers Product Bulletin Fisher 2506 and 2516 Receiver Controllers The 2506 receiver controller takes the input from a pneumatic transmitter, matches it against the adjustable set
More information7,15 436, Bore , ,12 Compression ratio. 18 Wet weight
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 7,15
More informationDFQ-1G-T Cutting machine control system. Operating Manual
R software version:v1.0 DFQ-1G-T Cutting machine control system Operating Manual DFQ-1G-T cutting machine control system v1.0 Current length: Current speed: 000000M 000M/Min Up winding tension Up winding
More informationModel R1500 Reciprocator
Model R1500 Reciprocator Description ITW BGK Finishing Systems reciprocating machines are designed to automatically apply spray coating to either one or both sides of products conveyed on an overhead or
More informationTechnical Part. Technique Specification
HYDRAULIC CNC PUNCHING MACHINE (VT-300) Technical Part Technique Specification Description Unit VT-300 Punch Force KN 300 Max. Processing Size mm 1250*2500 (with one reposition) Processing Thickness mm
More informationINQUIRY: HYROBOTICS CORP SAM LEE ( ) 5988 MID RIVER MALL DR. ST.CHARLES MO TEL : FAX :
INQUIRY: HYROBOTICS CORP SAM LEE ( Email : hanrobotic@msn.com ) 5988 MID RIVER MALL DR. ST.CHARLES MO 63304 TEL : 1-636-578-6059 FAX : 1-866-232-5594 1. Picker Body Installation 1-1. Picker Assembly. (Step
More informationMICRO EJECTORS ME12, ME25, ME60. Specifications. Mass MICRO EJECTORS. Vacuum switches. Micro ejectors. Single and twin solenoid valves.
ME12, ME25, ME60 Specifications Micro ejectors Media Operating pressure range MPa [psi.] Operating temperature range C [ F] Nozzle diameter Note mm [in.] kpa [in.hg] flow rate Note R/min [ft. 3 /min.]
More informationServo drive alarm. PLC error. l Door sensor alarm. -To put the safety cover on the right position. -To open the safety cover
1 l Door sensor alarm -To open the safety cover -To put the safety cover on the right position and check the monitor if the color is to be changed in white. Servo drive alarm - A red light is on in the
More information(BWS-BX30A Wire Stripper) User Manual
(BWS-BX30A Wire Stripper) User Manual Contents Part 1: Specification and Composition 1-7 Part 2: Operation.....7 Part 3: Elimination and Maintenance of Common Faults... 7 Part 4: Introduction to Safety..
More informationControl of Heat Processes
PG 30 kwietnia 2011 Slide 1 of 66 Turbine power PG test P = m ṁ 0 H η i η m η g m coefficient which takes into account extraction flows Slide 2 of 66 Turbine regulation PG 1. Quantative adjustment varied
More information4SA0/4SB0 Series Technical data 1) Caution for wiring diagram: D-sub connector
S0/S0 Series Technical data ) Caution for wiring diagram: D-sub connector D-sub connector type: Wiring method T0/T bout T0/T connector The connector for the wiring method T0 and T, which is usually called
More informationSure Coat Modular Gun Control System Part B: Pneumatic Modules. Customer Product Manual Part B
Sure Coat Modular Gun Control System Part B: Pneumatic Modules Customer Product Manual Issued 4/03 For parts and technical support, call the Industrial Coating Systems Customer Support Center at (800)
More informationPL 250V(VM) VERTICAL TURNING CENTER
VERTICAL TURNING CENTER MACHINE CNSTRUCTIN / FEATURES BED The main spindle body of PL250V is consisted of one piece meehanite cast Iron bed, wide column, anti heat displacement spindle and head stock.
More informationPNL-MS Belt Conveyor with Metal Detector
PNL-MS Belt Conveyor with Metal Detector Date: Apr, 2013 Version: Ver.B (English) Contents 1. General Description... 7 1.1 Coding Principle... 8 1.2 Features:... 8 1.2.1 Specifications Table... 10 1.2.2
More informationAutomatic die cutting machine model Brausse Bora 1050E
Automatic die cutting machine model Brausse Bora 1050E 1 Pictures might be slightly different from reality Highlights of all Brausse machines Extremely smoothly running due to the unique index box drive
More informationPRODUCT GUIDE INDUSTRIAL AUTOMATION ROBOTS / DRIVE PRODUCTS / SAFETY PRODUCTS / ELECTRICAL PRODUCTS INDUSTRIAL GROUP
INDUSTRIAL GROUP PRODUCT GUIDE Service N Solutions... it s in the name! SNS Industrial Group is NOT just another company which sells products. We are people working with people to explore and provide the
More informationREAD ALL INSTRUCTIONS CONTAINED IN THIS
Operations Manual Eagle R2B2 Stretch Wrapper READ ALL INSTRUCTIONS CONTAINED IN THIS MANUAL PRIOR TO MACHINE INSTALLATION! - 1 - Contents page 1. General Information 1.1 Installation Notes 2 1.2 Operational
More informationHow to Order. Body size
Standard Type Series N 00 Over 30 db () noise reduction Low back pressure Compact and easy mounting How to Order N 400 04 Body size 200 300 400 500 600 700 800 900 Thread type Symbol Type Nil R N NPT Symbol
More informationRecommended spare parts and often used accessories
Recommended spare parts and often used accessories Electric Actuators Rotary Actuators 2SA5 Linear Actuators 2SB5 Part-turn Actuators 2SC5 and 2SG5 for types 2 S 5 - - 3 4 Issue 07.18 Subject to changes
More informationAluminum Rod. LLZ Electric. Continuous Casting and Rolling line
Pure Aluminum Rod LLZ-15-1600 Electric Aluminum Rod Continuous Casting and Rolling line Technical Specification Foshan Metech Aluminum Technology CO., LTD Office address: 2 nd Floor, E1 building, Jiulong
More informationElectrohydraulics Basic Level Textbook TP 601
Electrohydraulics Basic Level Textbook TP 601 Festo Didactic 093611 en Order No.: 093611 Edition: 03/2006 Authors: C. Löffler, D. Merkle, G. Prede, K. Rupp, D. Scholz Graphics: Doris Schwarzenberger Layout:
More informationBT SERIES www.borchenorthamerica.com TABLE OF CONTENTS BT SERIES ENERGY EFFICIENT. DURABLE. PRECISE. COST EFFECTIVE COMPANY BACKGROUND...5 CUSTOMER SERVICE...6 FEATURES...8 MAJOR HYDRAULIC/ELECTRIC COMPONENTS...9
More informationT O C Car Signal Components Coils Door Equipment Key Switches Safety Edge Equipment Door Operator Equipment GAL Relay Parts Wheels
TOC Car Signal Components Emergency Light Assembly, Push-Button Caps, Position Indicator Inserts........................................ 222 Coils...........................................................
More informationSide Seal Horizontal Shrink Wrapper
ARPAC 9511 West River Street, Schiller Park, IL 60176 US Phone:847-678-9034 Fax:847-671-70 E-Mail: atillander@arpac.com Web site:www.arpac.com Item # ARPAC TS37, Side Seal Horizontal Shrink Wrapper QUOTE
More informationElectropneumatics Basic Level Set of Overhead Transparencies TP 201
Electropneumatics Basic Level Set of Overhead Transparencies TP 0 Festo Didactic 0950 en Order No.: 0950 Description: EL-PN.FOLIEN-GS Designation: D:OT-TP0-GB Edition: 0/000 Author: Frank Ebel Graphics:
More informationProgressive Central Lubrication System
Progressive Central Lubrication System APPLICATION Centralized lubrication systems with progressive distributors preferably serve the lubrication of machinery. The lubrication capacity is up to approx.
More information85 C HD 7/16-4 ST-H. Adaptation according to requirements thanks to retrofitting capability. Individual configurability saves investment costs
1800 680 337 HD 7/16-4 ST-H The space-saving stationary high-pressure cleaner from Kärcher with up to 6 workstation supply points. Individually configured according to met your requirements. Impressive
More informationHDS 5/15 UX. Integrated hose reel. Water fine filter. Innovative upright design. Compact design
HDS 5/15 UX Competitively priced entry class model of a hot water high-pressure cleaner. Innovative "Upright"-Design ensures good mobility and ergonomics. Very user-friendly due to one-button-operation
More informationIMC-60B Automatic Aluminum Tube Filling & Sealing Machine OPERATION MANUAL
INTERNATIONAL MACHIINE CONCEPTS IMC-60B Automatic Aluminum Tube Filling & Sealing Machine OPERATION MANUAL 1. Use Instructions CONTENT 1. Summary 2. Working Principle 3. Technical Parameters 4. Structural
More informationAppendix A. Spare parts drawings. for the. Sprint 5000 Bookletmaker
Sprint5000HCS-USA.doc3.doc Page 21 01/05/2002 Appendix A Spare parts drawings for the Sprint 5000 Bookletmaker C5003-FC 4.97 LHS 11 12 1 10 9 8 4 3 6 RHS 5 7 240V 3A 2 15 14 1. Panels C5000-1a 5.97 1.00
More informationRef. # Model # Generic Part # Eng. Part # Description 4200 EPT-2547-30-C EPT-30-4200 WPS-130-4200 Cylinder Assembly 4201 EPT-2547-30-C EPT-30-4201 WPS-130-4201 Cylinder Body Tube 4202 EPT-2547-30-C EPT-30-4202
More informationMSDG Series. Axial space saving structure and precise guided type. High precision, high rigidity and space saving High precision guided
U SM2 Axial space saving structure and precise guided type Axial space saving Compact axial length Footprint reduced Long service life design (approximate 4 times (CKD comparison)) Oil impregnated copper
More informationIM /2016 REV04 POWERTEC 350C PRO, 355C PRO & 425C PRO
IM0 09/0 REV0 POWERTEC 0C PRO, C PRO & C PRO Spare Parts... Figure A: Machine Assembly... Figure B: Machine Assembly... Figure C: Machine Assembly... Figure D: Machine Assembly... Figure E: Wire Drive
More informationHGM7100N SERIES (HGM7110N/7120N) GENSET CONTROLLER USER MANUAL
HGM7100N SERIES (HGM7110N/7120N) GENSET CONTROLLER USER MANUAL SMARTGEN (ZHENGZHOU) TECHNOLOGY CO., LTD. Chinese trademark English trademark SmartGen make your generator smart SmartGen Technology Co.,
More informationTemescal FC-1800 Electron Beam Evaporator System Refurbished by TES
Temescal FC-1800 Electron Beam Evaporator System Refurbished by TES Temescal FC-1800 Electron Beam evaporator system SYSTEM DESCRIPTION 18 diameter water cooled stainless steel chamber. 18 diameter x 8
More informationHGM1780 AUTOMATIC GENERATOR MODULE CONTENT 1. SUMMARY PERFORMANCE AND CHARACTERISTICS SPECIFICATION OPERATION...
CONTENT 1. SUMMARY...4 2. PERFORMANCE AND CHARACTERISTICS...4 3. SPECIFICATION...5 4. OPERATION...6 4.1. DISPLAY PANEL...6 4.2. LCD ICON INSTRUCTION...7 4.3. DISPLAY INSTRUCTIONS...7 4.4. DISPLAY DESCRIPTION...8
More informationELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL
ELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand 2 www.jbstools.com WWW.CHALLENGERHOISTS.COM.AU
More information