Catalog No. DE SANITARY VALVES

Transcription

1 atalog No. DE SNITRY VVES NIPPON DIY VVE O., TD.

2

3 SNITRY VVES ontens Prouct Guie... Prouct ist io-lean Diaphragm Valves 1-1. Features of io-lean Diaphragm Valves Stanar Specifications Manually Operate Valves Pneumatically Operate ON-OFF Valves (Stanar): PON(N) Pneumatically Operate ON-OFF Valves (Stainless Steel ctuator): PON.. 2. for Dea Spaces io-lean Diaphragm Valve Series 2-1. Self-Drain Valves: Type-F Sampling Valves: Type-P Way Valves: Type-K Tank ottom Valves: Type-T io-lean Diaphragm Valves for Dea Spaces 3. io-lean Diaphragm Valve Series 3-1. ranch Valves ombination Valves, Multi-ranch Valves Electronic Flow ontrol Valves Other Relate Sanitary Valves lean Room Relate -1. Sanitary all Valves Sanitary heck Valves Sanitary utterfly Valves Power & Granule / Tablet Discharge Valves Ultra-High irtight Dampers Sanitary Valves lean Room Relate 5. Technical Materials 1 Valve Main oy Dimension ist Inspection Pressure... 3 leaning Specifications... Valve Stroke an v-value... 5 Pneumatically Operate ON-OFF ctuator Selection Table: Operating Pressure 0.3 MPa 6 Prouct oe Descriptions ir hamber Volumes an ir onsumption for PON(N) Various ertificates Safety Instructions 1 7 Technical Materials Safety Instructions

4 PRODUT GUIDE Manually Operate Valves io-lean Diaphragm Valves Stainless Steel Hanle 00N DN8 Pneumatically Operate ON-OFF Valves luminum Hanle 00 DN 50 Quick Open/lose Hanle Q00N DN8 PO (P, PN) N DN 50 Opening imit Device with Special imit Switch ox PO (P, PN) N DN65 Pneumatically Operate ON-OFF Valves (Stainless Steel ctuator) Self-Drain Valve Type-F PO (P, PN) N DN8 10 for Dea Spaces Sampling Valve Type-P 3-Way Valve Type-K PO (P, PN) N DN 50 Tank ottom Valve Type-T DN8 DN8 DN8 DN

5 Please feel free to contact our sales ept. or local representative for etaile prouct specifications ranch Valve ombination Valve, Multi ranch Valve Electronic Flow ontrol Valve 00 ( ) lamp onnection orrosion-proof Valve Self-Drain Descening Valve MM (MM) 00 DN (S) Two Stage Open/lose ctuator Steam Trap Substituting Valve Sanitary Valves lean Room Relate 00 (R) Sanitary Valve Power & Granule / Tablet Discharge Valve Ultra-High irtight Damper The pictures in this catalogue show the images. The appearances may vary epening on the specification. 5

6 Prouct ist io-lean Diaphragm Valve Series Simplifie oe Main oy Material Stanar Nominal Size Range* DN 8 Stanar 2-Way Valves Valves for Dea Spaces Stainless Steel oy ine oy Self-Drain 1 13 SUS316 Forge SS16 Precision ast DN (2S)/(S) SS13 +PF ining DN 59 (M) FD-S +PF ining DN 60 (S) SUS316 Forge+ ETFE ining DN 65 1 (F) SUS316 Forge DN (F) SS16 Precision ast DN (F) SS13 +PF ining DN 50 : Stanar : Option : Not pplie Sampling Valve 1 (P) DN 50 3-Way Valve 1 (K) DN 50 Tank ottom Valve 1 (T) DN Special Valves*** ranch Valve 1 ( ) SUS316 SUS316 SUS316 SUS316 DN 50 ISS Ferrule (lamp Joint) ** onnection Stanar JT J10KFF (RF) stro (TIG) Weling Flange ISSU Union Screw 1 #00 uffing: Inner/Outer Surfaces Main oy Surface Finish lassification Diaphragm 2 3 E1 E2 TX/E TX/X #00 uffing: Inner Surface #00 uffing: Outer Surface (No-urnt olor) #00 uffing: Outer Surface (urnt olor) Inner Surface Electropolishing after #00 uffing on Inner/Outer Surfaces Inner Surface Electropolishing after #00 uffing on Inner Surface New PTFE/EPDM New PTFE/EPDM + Painte Outer Surface (white) Stainless Steel Hanle Manual luminum Hanle Quick Open/lose Hanle Operation Type Pneumatically Operate ON-OFF Valve Two Stage Open/lose ctuator uto Electronic Flow ontrol Valve Pneumatically Operate ontrol Valve Electrically Operate Valve * Please contact us for a possibility of proucing a prouct other than the stanar. ** With a manufacturing recor of special clamp type. Please contact us for etails. *** Other than this, specific orers for special valves an relate proucts are welcome. Please contact our sales ept. or local representative for materials an nominal sizes other than those liste in this table.

7 1 io-lean Diaphragm Valves 1-1. Features of io-lean Diaphragm Valves 1-2. Stanar Specifications 1 Valve Main oy Specifications 2 Diaphragm Specifications 3 Working Temperature Range an Max. Working Pressure 1-3. Manually Operate Valves 1 Hanle Specifications: 00N, 00 (00N), Q00N 2 Major Dimensions 1-. Pneumatically Operate ON-OFF Valves (Stanar): PON(N) 1 Features of ctuator 2 ctuator Selection Table 3 Major Dimensions 1-5. Pneumatically Operate ON-OFF Valves (Stainless Steel ctuator): PON 1 Features of ctuator 2 ctuator Selection Table 3 Major Dimensions

8 io-lean Diaphragm Valves Features for Dea Spaces Sanitary Valves lean Room Relate 1-1. Features of io-lean Diaphragm Valves Optimum valves for manufacturing equipment for meicine, bioprocesses, cosmetics, foos an semiconuctors q Excellent ir-tightness highly airtight structure perfectly separating the flui an actuator by a iaphragm. The structure (Packless) that oes not require a glan packing with high possibility of leakage as a general valve, is excellent for maintaining air tightness an prevention of contamination by various bacteria. w Structure not ontaminating the Flui The flow path consists only of main boy an iaphragm an is an optimum structure preventing the contaminant materials or lubricants from contacting the flui. The valve seat sealing metho to press the iaphragm to the weir of main boy oes not require the rotational parts or sliing parts require for ball valves an butterfly valves, accoringly almost no abrasion particle is expecte. e Excellent Washability Diaphragm ctuator Main oy The streamline flow path eliminating the ea space (pockets or flui accumulation) is excellent in washability an is a superior structure for IP (cleaning in place) or SIP (sterilization in place) for its effectiveness an washing time. When attaching a valve on a horizontal pipework, installation with TOP mark in upper sie will prevent the flui, rinse solution, etc., from remaining insie. TOP Mark Technical Materials r Excellent Maintainability simple structure of iaphragm valve consisting of only three units ctuator, Diaphragm an Main oy Disassembling is just to remove the bolts an nuts fastening the ctuator, Diaphragm an Main oy an that provies the excellent maintainability. In aition, the top-entry structure allows the maintenance work without removing the valve boy from piping. s one of the features of iaphragm valves, the original performance will be restore by replacing the iaphragm by new parts. The stanar exchangeability of various units will provie the ease of changing actuators. ctuator Safety Instructions Diaphragm Main oy 8

9 t Manufacturing of Valve Main Unit Tailore to pplications an Specifications The streamline flow path for main boy mae of stainless steel is buff finishe (#00) an that allows further electropolishing facilitating the prevention of flui accumulation, prevention of ahesion of substances in the flui, an the improve washability. The outsie surface of main boy an actuator are groun as esignate. pocket free compact special shape for sampling valves, 3-way valves, an tank bottom valves are available while preserving the features of bio-clean iaphragm valves as they are. The tailore manufacturing for fitting various joints such as ferrule joint (clamp joint) or wele types use in the fiels of meical rugs, bio processes, semiconuctors, etc., are available. Features io-lean Diaphragm Valves for Dea Spaces Sampling Valve: Type-P 3-Way Valve: Type-K Tank ottom Valve: Type-T y Excellent for orrosion-proof an hemical Resistance The valve main boies with optimum lining for countermeasures for corrosive fluis, crevice corrosion, an metal ion elution for sanitary pipework are available. The New PF applie for PF line main boy conforms to the FD of the US an Foo Sanitation ct of Japan. (Ref. 8 Various ertificates in 5. Technical Materials) SUS316 + ETFE ine Main oy (lamp onnection) u Sanitary Specification Diaphragms High-quality an safe sanitary specification iaphragms evelope base on our knowlege cultivate through the years of manufacturing of iaphragms. Our New PTFE iaphragm is approve by the FD in the US* as safe for contacting use for foo processing, cooking, etc. onforming to USP (US Pharmacopeia) lass VI** onforming to the stanars an criteria of Foo Sanitation ct of Japan. Foo an Drug ministration, HHS 21 FR h.1 (-1-9 Eition) 177, 50 * (HHS: Department of Health an Human Services) (FR: oe of Feeral Regulations) ** The conformance is recommene in SME PE (io Processing Equipment), POYMER construction materials use for contacting surfaces with prouct material (contacting surface with prouct an flui). (Ref. 8 Various ertificates in 5. Technical Materials) i Environment Frienly SS13 + PF ine Main oy (Flange onnection) SUS316 + PF oate Main oy Sampling Valve: Type-P (Special lamp onnection) Environment frienly paints are use for coating of actuator for bio-clean iaphragm valves. Diaphragm valves have less number of parts compare to other valve types owing to a simple unit structure; accoringly, there is no waste of wearing parts. Sanitary Valves lean Room Relate Technical Materials Safety Instructions o Integrate Manufacturing System in lean Room io-lean Diaphragm Valves are manufacture in the clean room with processes 1. leaning of flui contacting parts, 2. ssembly, 3. Inspection an. Packing an finishe to a clean prouct an elivere to the customers. 9

10 io-lean Diaphragm Valves for Dea Spaces Stanar Specifications Sanitary Valves lean Room Relate 1-2. Stanar Specifications 1 Valve Main oy Specifications Stainless Steel oy Manufacture Main oies Stainless Steel Forge Stainless Steel ast * Option lassification oe E1 E2 Name PF ining ETFE ining Main Material SUS316 SS16 Main oy Surface Finish lassification Please esignate from table below: * For main boies of forge stainless steel only ine Main oies Manufacture Main oies Name 59 (2S)/59 (S) 59 (M)* 60 (S) Material oe 1 13 onnection Stanar an Manufacturing Range stro (TIG) Union Ferrule Flange* Weling* Screw* Nominal Size (DN) Nominal Size (DN) Nominal Size (DN) Nominal Size (DN) Process #00 uffing: Inner/Outer Surfaces #00 uffing: Inner Surface* #00 uffing: Outer Surface* Inner Surface Electropolishing after #00 uffing on Inner/Outer Surfaces* Inner Surface Electropolishing after #00 uffing on Inner Surface* ase Material SS13 FD-S SUS316 Material oe onnection Stanar an Manufacturing Range Ferrule Flange Nominal Size (DN) Nominal Size (DN) 65 * Stanar external painting (white) PF ining: The lining material New PF conforms to FD of the US an Foo Sanitation ct of Japan. (Ref. 8 Various ertificates in 5. Technical Materials) 8 Stanar Main oy (Ferrule) Technical Materials Safety Instructions : In case of export, export license stipulate in the Foreign Exchange an Foreign Trae ontrol aw of Japan an/or if necessary, export-relate laws an regulations of the Unite States of merica an other countries is require. Main oy Surface Finish lassification (Option) Please esignate from table below: lassification oe Process 3 #00 uffing: Outer Surface (urnt olor) #00 uffing: Outer Surface (No urnt olor) (For base material FS-S: White painting for stanar external painting, no grining) Detaile Dimensions of Main oy In accorance with P. 2 Valve Main oy Dimension ist Others PF ining: Please contact us for special clamp connection types. PF ining (Flange) ETFE ining (Ferrule) 10

11 2 Diaphragm Specifications The New PTFE iaphragm is aopte for flui contacting sie, an the cushion rubber (EPDM or EPDM + α) is applie for the backsie for improve sealing performance of valve. New PTFE Stanar Specifications io-lean Diaphragm Valves Diaphragm/ushion Rubber Material Material oe Nominal Size (DN) Working Temperature Range Max Working Pressure New PTFE/EPDM New PTFE/EPDM + α TX/E TX/X MPa 1.0MPa EPDM + α is evelope by our company for enhance thermal urability of EPDM. Our New PTFE iaphragm conforms to FD of the US, USP class VI an Foo Sanitation ct of Japan. (Ref. 8 Various ertificates in 5. Technical Materials) Option: Fluorine ushion Rubber, Hastelloy Diaphragm Fixing ayonet Pin 3 Working Temperature Range an Max. Working Pressure New PTFE/EPDM (TX/E), Stainless Steel PF ine Main oy* Working Temperature Range: Working Pressure/Temperature Range by Nominal Size for Dea Spaces Pressure (MPa) DN8/ 8/20 /65 / Sanitary Valves lean Room Relate Temperature ( ) New PTFE/EPDM + α (TX/X), Stainless Steel PF ine Main oy* Working Temperature Range: (max. working temperature for continuous use) Working Pressure/Temperature Range by Nominal Size Pressure (MPa) DN8/ /20 /65 / Technical Materials Safety Instructions Temperature ( ) * ower limit temperature for PF line main boy mae of base material FD-S is

12 io-lean Diaphragm Valves for Dea Spaces Manually Operate Valves Sanitary Valves lean Room Relate Technical Materials 1-3. Manually Operate Valves 1 Hanle Specifications: 00N, 00 (00N), Q00N Stainless Steel Hanle Type: 00N Manual valves with highly urable stainless steel hanle an ease of cleaning. Stanar Specifications Nominal Size (DN) 8 onnet Material SS13* Outsie #00 uffing Hanwheel Material SS13* Outsie #00 uffing ompressor Material SS13 * SS13 for DN8 10 luminum Hanle Type: 00 (00N) luminum hanle type lightweight an cost benefit conscious manual valves. Stanar Specifications Nominal Size (DN) 50* onnet Material D12 Hanwheel Material D12 ompressor Material D12 Stanar Painting olor White thermal curing acrylic resin paint (eco-frienly) bake finish * Separately supplie general-purpose aluminum hanle 00N (white painting) are available. ontact us for a etaile stuy. Quick Open/lose Hanle: Q00N (Option) Quarter turn (90º) actuator with lever hanle. Stable closing performance with simple operation. The valve status can be recognize with the hanle position from far place like ball valves. Too tight closing by open/close operation can be prevente an the long life is expecte with no excessive loaing on iaphragm. Stanar Specifications Nominal Size (DN) onnet Material ever Hanle Material ompressor Material Position Setting Option Other Options 2 Main Dimensions 8 SS13 Outsie #00 uffing SUS30 (PV coating) SS13 Two positions: Full lose / Full Open imit Switch Q00N 00N 00 DN 50 Full Open Valves with lock nut, position inicator, etc., are provie as requeste. Please contact our sales ept. or local representative. pprox. H W pprox. H W pprox. H W DN8 10 DN 50 DN65 pprox. H W 90 pprox. H 00N DN (with position inicator) W Full lose 90 Safety Instructions 00N-DN8, 10 00N-DN 50 00N-DN65 00-DN 50 Q00N-DN8 Nominal DN Size S Ferrule stro (TIG) Weling Flange Union Screw pprox. 00N H Q00N W 00N Q00N Mass 00N (pprox. kg) Q00N * The above table is base on Ferrule main boy mae of SUS316. ontact us for etaile imensions for each valve

13 1-. Pneumatically Operate ON-OFF Valves (Stanar): PON (N) 1 Features of ctuator (PON) Significantly ight Weight, ompactness omparison with our conventional prouct (PON) Mass: Max. weight reuction of approx. 13%! Height: Max. compactification of 22%! Outer Diameter: Max. compactification of 18%! ir onsumption: Max. air saving of 20%! Significantly Improve Smoothness of ction an Durability The aopte outer wear ring for the piston provies the smoothness of action to significantly enhance the urability. The aopte stopper nut prevents the excessive loaing on iaphragm Excellent External Shape for leaning The aopte retaining ring for fixing the bonnet an cyliner an the built-in exhausting plug improve the cleanability owing to the extreme reuction of surface roughness of actuator. Eco-Frienly Paint Eco-frienly paint is aopte for the white bake finishing for the actuator surface. (The corrosion proof performance of this paint was confirme through the ip tests performe using various IP liqui an washing agents.) Pneumatically Operate ON-OFF Valves io-lean Diaphragm Valves for Dea Spaces Sanitary Valves lean Room Relate ctuator Specifications Types PO (P, PN) N (N)* ctuator oe 07, 09, 12, 16, 16, 20, * Single cting: Reverse cting PO (ir to Open / Spring to lose) Types of Operation Direct cting P (ir to lose / Spring to Open) Double cting: PN (ir to Open / ir to lose) Nominal Size (DN) * yliner: D12 ctuator Materials onnet: D12 (SS13 for PON) Stanar Painting: White thermal curing acrylic resin paint (eco-frienly) bake finish Operating Pressure Max. Shutoff Differential Pressure ubricants Options*** MPa Option:0.3 MPa** MPa assia Grease HDS2 (Stanars regaring foo aitives: FD21FR ubricants with permission of inciental contact with foo: NSF lass H1 conforming prouct) Opening limit evice, Special limit switch box (Eco-frienly type, white bake finish) * DN65 are equippe with PON-16-. The basic specifications, such as action performance with wear ring, corresponing options are the same. ** The 0.3 MPa actuator is equippe with PON. Please refer to page for the actuator selection table. *** The commercially-supplie accessories may be attache as requeste. Please contact our sales ept. or local representative for the etails. Technical Materials Safety Instructions 13

14 io-lean Diaphragm Valves for Dea Spaces Pneumatically Operate ON-OFF Valves 2 Nominal Size (DN) ctuator Right Table** Right Table** Right Table** * Option, ** PON Nominal Size (DN) * PNN ctuator Selection Table Reverse cting: PON (N) ctuator Right Table** New PTFE Diaphragm Working Pressure (MPa) New PTFE Diaphragm Working Pressure (MPa) Double cting: PNN (N) 3 Major Dimensions (*1) (*1) 20 Direct cting: PN (N) Nominal Size (DN) * PN ctuator Right Table** Right Table** Right Table** New PTFE Diaphragm Working Pressure (MPa) Sanitary Valves lean Room Relate Ø Rc PON POMN PON POMN pprox. H EXH. Ø Rc pprox. H EXH. 1 2 Rc pprox. H W Rc pprox. H Technical Materials Safety Instructions Nominal Size DN S ctuator * 20* 20* * 20* * DN 50 PO P PN pprox. H POM PM PNM * PON The above table is base on Ferrule main boy mae of SUS316. ontact us for etaile imensions for each valve. Rc 1/8 1/ Ø W DN65 Mass (pprox. kg) e Mass of PO Special imit Switches POM

15 1-5. Pneumatically Operate ON-OFF Valves (Stainless Steel ctuator): PON 1 Features of ctuator ctuator excellent in corrosion-proof an cleaning performances Pneumatically Operate ON-OFF Valves io-lean Diaphragm Valves for Dea Spaces DN8 10 Excellent leanability / External Shape DN 50 Excellent orrosion-proof Performance / ll Stainless Steel Expose surfaces are all mae of stainless steel. More excellent in corrosion proof performance compare to stanar aluminum actuator (PON (N)). No requirement for coating prevents the occurrence of foreign substances ue to peeling of coate films. retaining ring is aopte for fixing the bonnet an cyliner similarly as stanar aluminum actuator (PON). ompactness & buffing, excellent in cleanability. Sanitary Valves lean Room Relate ctuator Specifications Types ctuator oe Types of Operation Nominal Size (DN) ctuator Materials Operating Pressure Max. Shutoff Differential Pressure ubricants Options Significantly Enhance Smoothness of ction an Durability The aopte outer wear ring for piston an bearing* for spinle sliing zone have significantly enhance the smoothness of action an urability. (* Excluing actuator coe 05S) PO (P, PN) N 05S, 07S, 09S, 12S, 16S Single cting: Reverse cting PO (ir to Open / Spring to lose), Direct cting P (ir to lose / Spring to Open), Double cting: PN (ir to Open / ir to lose) 8 50 yliner: SS13 #300 uffing onnet: SS13 #200 uffing or Precision ast Surface MPa Direct cting an Double cting types shall be in accorance with a separate actuator selection table. 1.0MPa assia Grease HDS2 (Stanars regaring foo aitives: FD21FR ubricants with permission of inciental contact with foo: NSF lass H1 conforming prouct) Opening limit evice, Special limit switch box (Eco-frienly type, white bake finish) Technical Materials Safety Instructions

16 io-lean Diaphragm Valves for Dea Spaces Pneumatically Operate ON-OFF Valves 2 Nominal Size (DN) * Option Nominal Size (DN) ctuator Selection Table Reverse cting: PON Operating Pressure: MPa Direct cting: PN ctuator 05S 05S 07S 09S 09S 12S 16S Double cting: PNN 3 ctuator 05S 05S 07S 09S 09S 12S 16S New PTFE Diaphragm Working Pressure (MPa) New PTFE Diaphragm Working Pressure (MPa) Major Dimensions 0.3 (*1) (*1) Operating Pressure: In table below, MPa (Operating pressure of 05S: Same as reverse acting) Nominal Size (DN) ctuator 05S 05S 07S 09S 09S 12S 16S New PTFE Diaphragm Working Pressure (MPa) Operating Pressure: In table below, MPa (Operating pressure of 05S: Same as reverse acting) Sanitary Valves lean Room Relate pprox. H PON-DN8 10 Rc Ø Ø Rc PON-DN 50 pprox. H EXH. Technical Materials Safety Instructions pprox. H Nominal Mass Size ctuator PO Rc Ø (pprox. kg) P DN S PN PO 8 05S S S S / S S S The above table is base on Ferrule main boy mae of SUS316. ontact us for etaile imensions for each valve. 16

17 2 io-lean Diaphragm Valve Series for Dea Spaces 2-1. Self-Drain Valves: Type-F 1 Features of 2 Valve Specifications 2-2. Sampling Valves: Type-P 1 Features of 2 Valve Specifications 3 Major Dimensions Way Valves: Type-K 1 Features of 2 Valve Specifications 3 Major Dimensions 2-. Tank ottom Valves: Type-T 1 Features of 2 Valve Specifications 3 Major Dimensions 17

18 io-lean Diaphragm Valves 2-1. Self-Drain Valves: Type-F 1 Features of What is the Self-Drain Valve? valve main boy with enhance flui accumulation prevention effect of io lean Diaphragm Valve series. This valve has a structure that eliminates the flui accumulation by horizontally positioning the valve axis when implementing in a horizontal pipeline. for Dea Spaces Self-Drain Valves: Type - F Sanitary Valves lean Room Relate Technical Materials Safety Instructions omparison with Stanar Valve Main oy (with valve axis horizontally positione) Example of pplications Other Specifications TOP OTTOM Eccentricity For various biotechnology systems, ultra-pure water prouction system for semiconuctor inustries an other systems requiring zero liqui accumulation in flui path 2 Valve Specifications Stainless Steel Manufacture Main oies Name Stainless Steel Forge Stainless Steel ast * Option ine Main oies Manufacture Main oies Name PF ining Stainless Steel Main oy: 1 (F) ase Material SS13 Stanar The valve seat is on the same centerline with straight pipe. Main Material SUS316 SS16 Material oe 59(F) Material oe 1(F) 13(F) onnection Stanar an Manufacturing Range stro (TIG) Union Ferrule Flange* Weling* Screw* Nominal Size Nominal Size Nominal Size Nominal Size onnection Stanar an Manufacturing Range Flange Nominal Size 50 : In case of export, export license stipulate in the Foreign Exchange an Foreign Trae ontrol aw of Japan an/or if necessary, export-relate laws an regulations of the Unite States of merica an other countries is require. PF ine Main oy: 59 (F) Self-Drain Seat center an straight pipe center are eccentrically positione an the bottom en of valve seat is in line with inner wall of straight pipe Main boy surface finish classifications, iaphragm specifications, etc., are in accorance with the stanar specifications. (Ref. page 10 11) Interchangeability with the units for stanar main boies allows the common use with the actuators for manually operate valves an pneumatically operate ON-OFF valves. 18

19 2-2. Sampling Valves: Type-P 1 Features of Sampling of flui without a ea space (pockets or flui accumulation). compact boy that allows a irect implementation in pipeline an the structure with no resiual liqui in a valve. pplicable for a wie range of applications, such as branching, merging (mixing), introuction of washing water or sterilization steam an ischarging, as well as sampling. 2 Valve Specifications Stanar Specifications Manufacture Main oies Valve Open lose onnecte Ports Port No. 3 2 Sampling Valves: Type-P io-lean Diaphragm Valves for Dea Spaces Main oy Material Nominal Size (DN) Operation Type Other Specifications SUS316 ombination of main pipe an valve Stanar: 50 (other range supplie as option) Manual operation an pneumatic operation are applicable. Main boy surface finish classifications, iaphragm specifications, etc., are in accorance with the stanar specifications. (Ref. page 10 11) Interchangeability with the units for stanar main boies allows the common use with the actuators for manually operate valves an pneumatically operate ON-OFF valves. Please contact us for PF coate main boy (special clamp connection). 3 Major Dimensions (reference) typical example is shown with the combination of various nominal sizes an actuators. Please contact us for combinations other than the table below. Manually Operate Valve: 1 (P) N f pprox. H Sanitary Valves lean Room Relate e 1 ØW Pneumatically Operate ON-OFF Valve: PO11 (P) N f pprox. H 1 e Main Pipe Valve DN (S) () (1S) (1S1S) 0 (1.5S) 0 (1.5S1S) 00 (1.5S1.5S) 50 (2S) 50 (2S1S) 500 (2S1.5) 5050 (2S2S) Rc1/8 ØW /2 EXH. /2 Manually (00N) Pneumatically ON-OFF (PO) 1 e f pprox. W ctuator pprox. H H W Technical Materials Safety Instructions 19

20 io-lean Diaphragm Valves Way Valves: Type-K 1 Features of Direct installation in a pipeline, compact an a structure with no resiual flui in valve. wie range of application, such as branching, merging (mixing), introuction of washing water an sterilization steam, an ischarge. 1 2 Valve Open lose Open Open lose Open onnecte Ports Port No. 3 2 for Dea Spaces 3-Way Valves: Type-K 2 Valve Specifications Stanar Specifications Manufacture Main oies 3 lose lose Main oy Material Nominal Size (DN) Operation Type Other Specifications SUS316 ombination of main pipe an valve Stanar: 50 (other range supplie as option) Manual operation an pneumatic operation are applicable. Main boy surface finish classifications, iaphragm specifications, etc., are in accorance with the stanar specifications. (Ref. page 10 11) Interchangeability with those units for stanar main boies allows the common use with the actuators for manually operate valves an pneumatically operate ON-OFF valves. Please contact us for PF coate main boies (special clamp connection). Sanitary Valves lean Room Relate 3 Major Dimensions (reference) typical example is shown with the combination of various nominal sizes an actuators. Please contact us for combinations other than the table below. Manually Operate Valve: 1 (K) N pprox. H1 pprox. H2 ØW1 F1 Technical Materials Safety Instructions ØW2 F2 /2 /2 Pneumatically Operate ON-OFF Valve: PO11 (K) N /2 F1 Main Pipe Valve DN (S) () (1S) (1S1S) 0 (1.5S) 0 (1.5S1S) 00 (1.5S1.5S) 50 (2S) 50 (2S1S) 500 (2S1.5) 5050 (2S2S) pprox. H1 Rc1/8 ØW1 EXH. Rc1/8 pprox. H2 ØW2 EXH. /2 Manually Operate Valve (00N) F1 F2 pprox. pprox. H1 H2 W1 W F2 Pneumatically Operate ON-OFF Valve (PO) ctuator: pprox. ctuator: pprox. W1 H1 H2 W

21 2-. Tank ottom Valves: Type-T 1 2 Features of Excellent agitation efficiency with irect weling on tank bottom No glan packing, stem, seat, gasket, etc., at contacting zone with liqui, an the open/close operation only by iaphragm will facilitate smooth ischarge of tank contents with almost no resiues. Extremely low contamination attributable to valve parts, an the washing an sterilization are easy an secure. wie range of nominal size from DN to (S) facilitates the application from small container of 10 to a meium size tank of 10,000. Valve Specifications Stanar Specifications Manufacture Main oies Installation Tank ottom Valves: Type-T io-lean Diaphragm Valves for Dea Spaces Main oy Material Nominal Size (DN) Operation Type Option Other Specifications 3 Major Dimensions (reference) SUS316 Manual operation an pneumatic operation are applicable. Flange connection, ranch pipe, etc. Main boy surface finish classifications, iaphragm specifications, etc., are in accorance with the stanar specifications. (Ref. page 10 11) Interchangeability with the units for stanar main boies allows the common use with the actuators for manually operate valves an pneumatically operate ON-OFF valves. typical example is shown with the combination of various actuators. Please contact us for combinations other than the table below. Manually Operate Valve: 1 (T) N E pprox. I Ø D 1 Pneumatically Operate ON-OFF Valve: PO11 (T) N pprox. I E Ø D 1 Sanitary Valves lean Room Relate Nominal Size DN (S) 20 (1S) 0 (1.5S) 50 (2S) 65 (2.5S) (3S) (S) pprox. H2 Manually Operate Valve (00N) 1 2 D E pprox. pprox. pprox. W Mass H1 H2 I (pprox. kg) ØW pprox. H pprox. H ØW Rc1/8 Pneumatically Operate ON-OFF Valve (PO) pprox. pprox. pprox. ctuator H1 H2 I W * * * * * * * PON pprox. H Mass (pprox. kg) 21 Technical Materials Safety Instructions

22 Memo

23 3 io-lean Diaphragm Valve Series 3-1. ranch Valves 1 Features of 2 Valve Specifications 3 Major Dimensions ombination Pattern Diagrams 3-2. ombination Valves, Multi-ranch Valves 1 ombination Valves 2 Multi-ranch Valves 3-3. Electronic Flow ontrol Valves 1 Features an Specifications of 2 ctuator Selection Table 3 Major Dimensions 3-. Other Relate 1 lamp onnection orrosion-proof Valves Fluororesin (ETFE) ine Main oy 2 Self-Drain Descening Valves 3 Two Stage Open/lose ctuator Steam Trap Substituting Valves 23

24 for Dea Spaces io-lean Diaphragm Valves ranch Valves 3-1. ranch Valves 1 Features of The combination valves with vertically/horizontally-branche valves (or pipes) on the position with no liqui accumulation of main valve vailable for a wie range of applications, such as branching, merging, sampling, an introuction of sterilization steam. The simple structure branch valve (or pipe) combination has a higher cost benefit compare to conventional sampling valves or 3-way valves. (Pay attention on ea space generate between main valve an branch valve from structural reason) 2 Valve Specifications Stanar Specifications Main oy Material Nominal Size (DN) Operation Type Other Specifications Horizontal main valve / vertical branch valve SUS316 ombination of main pipe an valve Stanar: 50 (other range supplie as an option) Manual operation an pneumatic operation are applicable. Main boy surface finish classifications, iaphragm specifications, etc., are in accorance with the stanar specifications. (Ref. page 10 11) Interchangeability with the units for stanar main boies allows the common use with the various actuators for manually operate valves an pneumatically operate ON-OFF valves. Sanitary Valves lean Room Relate Technical Materials Safety Instructions 3 reference example is shown below for horizontal main valve with vertical branch valve. The combination of various mounting pattern, nominal size, operation type, etc., is manufacture as requeste. (Please refer to the next page for etails of mounting patterns.) Valve: Port 1 Major Dimensions (reference) Manually Operate Valve: 1 () Nominal Size DN (S) Valve: /2 Port 3 Port 2 ØDw ØDw 2 Dw W1 W2 H pprox. W1 pprox. W2 /2 2 pprox. H /2 Valve Open lose Open Open lose Open lose lose onnecte Ports Port No (1S) 0 (1.5S) 50 (2S)

25 ombination Pattern Diagrams q ranch Valves (Horizontal Main Valve) ranch Valve Position ranch Valve Direction Main Valve: Horizontal ranch Valve: Vertical Main Valve: Horizontal ranch Valve: Horizontal Front Right Sie w ranch Valves (Vertical Main Valve) ack Front eft Sie ack D E F G H ranch ranch Valve Valve Position Position Upper Sie ower Sie ranch Valve Direction Front ack Front Main Valve: Vertical ranch Valve: Horizontal e ranch Valves (Horizontal Main Valve) ranch Valve Position ranch Valve Direction Main Valve: Horizontal Front ack I J K Right Sie ack Front eft Sie ack ranch Valves io-lean Diaphragm Valves for Dea Spaces Sanitary Valves lean Room Relate ranch Pipe: Vertical Main Valve: Horizontal ranch Pipe: Horizontal r ranch Valve (Vertical Main Valve) ranch ranch Valve Valve Position Position ranch Valve Direction Main Valve: Vertical Front R T Upper Sie ack Front S U ower Sie ack Technical Materials Safety Instructions ranch Valve: Horizontal V

26 io-lean Diaphragm Valves 3-2. ombination Valves, Multi-ranch Valves 1 ombination Valves The following requests are respone through the manufacturing of combination valves. Please contact our sales ept. or local representative for a etaile stuy. Separation or merging of flow is require, but shall be as compact as possible Integration of multiple valves is require for compactification. countermeasure for ea spaces in various processes is require. Reuction of retaine water is require with an installation in a special posture. Technical Materials ombination/multi-ranch Valves Sanitary Valves lean Room Relate for Dea Spaces 2 Multi-ranch Valves combination of a number of valves is integrate into a compact main boy with branche an merge functions. The number of ports are esigne an manufacture to the request. The interchangeability of actuator with stanar main boies allows the use for both manually an pneumatically operate valves. Example of 6 Port Valve: ranching in 6 irections or merging from 6 irections Safety Instructions Specifications Main oy Material Main oy Surface Finish onnection Stanar SUS316 #00 uffing: Inner/Outer Surfaces, Electropolishing: Inner Surface Ferrule, other connections are available. 26

27 3-3. Electronic Flow ontrol Valves 1 Features Features an Specifications of small in iameter, eicate electronic flow control actuator can be mounte. Optimum for flow control in a clean room or sterilization room where the ischarge of instrument air has to be avoie. Examples of pplications Environmental automatic control valve for culture vessel, automatically controlle measurement valve for proucts of ifferent viscosity an other cases where precise flow regulation is require. ctuator Specifications Nominal Size (DN) Prouct Type Power Supply Signal Structure ction onnector Max. Working Pressure Option Other Specifications 8 50 DN8, 10: MM00/DN 50: MM00 D2V ( 120V, V is available as well) 20 m or D1 5V Outoor Drip Proof Reverse cting, Direct cting (switchover) G1/2 (PF1/2) female, with cable connector (with cable 1 m) 0.7 MPa With Terminal ox: G1/2 (PF1/2) female2, screw terminal ( 2 mm) The specifications for main boies an iaphragms are in accorance with stanar specifications (Ref. page 10-11). rolling iaphragm type control valves are recommene when a pneumatically operate control valve is requeste. The actuator specifications, etc., are similar to our general-purpose function proucts O () 300. Please refer to the catalog Diaphragm Valve together for etails. (Interchangeable with various main boies an iaphragms for bio-clean iaphragm valves) 2 Stanar Specifications Nominal Size DN (S) 8/10 20 (1S) 0 (1.5S) 50 (2S) 3 ctuator Selection Table Major Dimensions Working Pressure (MPa) H MSP6-6 Ø W1 MSP6-3 MSP-17 MSP6-36 Nominal Size DN (S) 8/10 20 (1S) 0 (1.5S) 50 (2S) ctuator MSP-17 MSP6-3 MSP6-36 MSP6-3 MSP6-36 MSP6-3 MSP6-36 MSP6-6 ØW W1 Ø pprox. H Mass (pprox. kg) Electronic Flow ontrol Valves io-lean Diaphragm Valves for Dea Spaces Sanitary Valves lean Room Relate Technical Materials Safety Instructions The above table is base on Ferrule main boy mae of SUS316. ontact us for etaile imensions, etc., for each valve. 27

28 io-lean Diaphragm Valves 3-. Other Relate 1 lamp onnection orrosion-proof Valves: Fluororesin (ETFE) ine Main oy The optimum main boies as the countermeasures for corrosive fluis, crevice corrosion by l - ion an elution of metal ions for sanitary piping. ining Material: ETFE for Dea Spaces Main oy Material: SUS316 onnection: lamp Joint (ISO2852) Other Relate Sanitary Valves lean Room Relate Features of Prouct Fluororesin (ETFE) lining is corrosion proof to strong acis, inorganic alkali, halogens, an metal salt solutions. ompare to special alloy materials, such as expensive uplex stainless steel, generally better in cost performance. option of rotational moling process for acquiring strong ahesion of lining on the metal boy eliminates the lifting or swelling of lining for the high temperature vacuum specifications. The joints an gaskets in market can be use. Max. Working Temperature: Nominal Size: DN 65 (1S 2.5S) Self-Drain Descening Valves Safety Instructions Technical Materials Differently from conventional self-rain structure of horizontal installation of actuator in the pipeline, the vertical installation structure of actuator makes it possible to rain the flui stagnation while minimizing the space. The valve seat configuration is ientical with our stanar specification iaphragm valves. The conventional stanar iaphragms can be use. Over % of path area is secure compare to the contracte port iameter. This brings about a larger v-value compare to our conventional proucts.* * The v-values are our internally measure values. The values in real operation may be lower than the v-values above epening on various practical conitions of use. 28

29 3 Two Stage Open/lose ctuator Features of Non-step valve position ajustment is available. Implemente as filling valves for meical rug proucts an potable water. Interchangeable with various main boies of bio-clean iaphragm valves. The ajusting range for meium opening: 0 30% Sub yliner ir hamber Main yliner ir hamber Steam Trap Substituting Valves Stop Screw for Opening justment FOW Example of ction Pattern Two stages to full open / two stages to full close Full Open Full lose Valve Opening Intermeiate Full Open Intermeiate Full lose ir hamber Exhaust Intake Intake Intake Exhaust Intake Exhaust Exhaust Setup for Intermeiate Opening Valve ction D E F G H Patterns one stage to full open / two stages to full close an two stages to full open / one stage to full close are available as well. Other Relate io-lean Diaphragm Valves for Dea Spaces The esign is in accorance with NDV stanar excluing grooves. NDV stanar parts can be use for actuators as well as consumable parts such as iaphragms. The rain will be continuously ischarge through a groove forme on the valve seat Sanitary Valves lean Room Relate Diaphragm onnection Type: lamping Weling Flange Nominal Size: DN8 (S) Electropolishing is available on flow path surfaces. Features of Main oy Simple esign rain ischarge valve for sanitary piping. pplication of bio-clean iaphragm valve; an optimum solution for various manufacturing equipment, such as meical rugs, cosmetics, foos an semiconuctors. Diaphragm valve continuously raining through a small hole on the valve seat preesigne to the preicte rain quantity; an iea that i not exist in conventional steam trap. The combination of this prouct an our stanar iaphragm valve will configure a clean an stable raining system. The simple configuration eliminating bypass piping can reuce the chance of pollution. The basic structure of the iaphragm valve can avoi immeiate failure even when foreign substances enter the valve seat an can provie excellent maintainability. Technical Materials Safety Instructions Response to the customer's nees through a mae to orer system is the strength of our company. Please feel free to contact us for any requests regaring options for various operation evices an special shape of main boies or special materials. 29

30 Memo

31 Sanitary Valves lean Room Relate -1. Sanitary all Valves 1 Prouct Specifications 2 Major Dimensions -2. Sanitary heck Valves 1 Prouct Specifications 2 Major Dimensions -3. Sanitary utterfly Valves 1 Prouct Specifications 2 Major Dimensions -. Power & Granule / Tablet Discharge Valves 1 [Power & Granular Prouct Discharging] Sanitary utterfly Valves 2 [Tablet Discharging] Sanitary Dampers -5. Ultra-High irtight Dampers 1 Features of 2 Prouct Specifications 3 ctuator Selection Table Major Dimensions 31

32 io-lean Diaphragm Valves for Dea Spaces -1. Sanitary all Valves 1 2 Prouct Specifications 2M: 2-Way all Valve / N3-M: 3-Way all Valve Flui ontacting Parts Material SUS316 Seat Material PTFE Stanar: Fluorine Rubber Packing Material Option: EPDM, Silicon Rubber, NR Insie: #320 #00 uffing Surface Finish Outsie: #320 #00 uffing Working Temperature Range (NR: -5 ) onnection Stanar Ferrule Screw in accorance with ISO stanar Max. Working Pressure 0.7 MPa Pneumatic Operating Pressure 0. MPa (max 0.7 MPa) Major Dimensions 2V-M: Small Diameter 2-Way all Valve Flui ontacting Parts Material SUS316 Seat Material PTFE Insie: #00 uffing Surface Finish Outsie: Hairline Finish Working Temperature Range 0 95 onnection Stanar Ferrule Screw in accorance with ISO stanar Max. Working Pressure 0.7 MPa 2M: Manually Operate 2-Way all Valve Ø E Nominal Size (DN) E (1S) (1.5S) (2S) (2.5S) (3S) (3.5S) (S) Remarks: Resin (S) hanle for 1S 1.5S, SUS hanle for 2S an above Sanitary Valves lean Room Relate Sanitary all Valves Technical Materials N3-M: Manually Operate 3-Way all Valve 2V-M: Small Diameter Manually Operate 2-Way all Valve E Ø Nominal Size (DN) E (1S) (1.5S) (2S) (2.5S) (3S) (3.5S) (S) Safety Instructions E Ø Nominal Size (DN) E

33 2M-PW: Pneumatically Operate 2-Way all Valve (Double cting) E 2M-PS: Pneumatically Operate 2-Way all Valve (Single cting) E Ø Ø Nominal Size (DN) E Nominal Size (DN) E (1S) (1S) (1.5S) (1.5S) (2S) (2S) (2.5S) (2.5S) (3S) (3S) (3.5S) (3.5S) (S) (S) io-lean Diaphragm Valves for Dea Spaces N3-PW: Pneumatically Operate 3-Way all Valve (Double cting) E N3-PS: Pneumatically Operate 3-Way all Valve (Single cting) E Ø Ø Nominal Size (DN) E Nominal Size (DN) E (1S) (1S) (1.5S) (1.5S) (2S) (2S) (2.5S) (2.5S) (3S) (3S) (3.5S) (3.5S) (S) (S) Sanitary all Valves Sanitary Valves lean Room Relate Technical Materials Safety Instructions 33

34 io-lean Diaphragm Valves 2M-E: Electrically Operate 2-Way all Valve E Nominal Size (DN) E (1S) (1.5S) (2S) (2.5S) (3S) (3.5S) (S) for Dea Spaces Sanitary Valves lean Room Relate Sanitary all Valves Safety Instructions Technical Materials Ø N3-E: Electrically Operate 3-Way all Valve Ø E Nominal Size (DN) E (1S) (1.5S) (2S) (2.5S) (3S)

35 -2. Sanitary heck Valves 1 Prouct Specifications ift-catch type check valves (non-return valve). Eccentric types an rain nozzle types are prepare as well. lamp-type mounting of main boy provies ease of isassembling/assembling an is excellent in maintenance. racking Pressure Max. Working Pressure Surface Finish Orinary Temperature Range onnection Stanar Max. Working Pressure 2 Major Dimensions DV: heck Valve Ø Ø 0.01 MPa 0.5 MPa Insie: #320 #00 uffing Outsie: Shot Finish - 5 (Stanar seal material: Fluorine Rubber) Ferrule Screw in accorance with ISO stanar 0.5 MPa Nominal Size (DN) Mass (kg) (1S) (1.5S) (2S) (2.5S) (3S) (3.5S) (S) io-lean Diaphragm Valves for Dea Spaces HV: Eccentric heck Valve H Ø Ø Nominal Size (DN) H Mass (kg) (1S) (1.5S) (2S) (2.5S) (3S) Sanitary heck Valves Sanitary Valves lean Room Relate HNV: Eccentric heck Valve (with Drain Nozzle) H Ø Ø Nominal Size (DN) E F H Mass (kg) (1S) 0 (1.5S) 50 (2S) 65 (2.5S) (3S) Technical Materials Safety Instructions F ØE 35

36 io-lean Diaphragm Valves for Dea Spaces Sanitary Valves lean Room Relate Sanitary utterfly Valves Technical Materials -3. Sanitary utterfly Valves 1 Prouct Specifications R series butterfly valves are compactly esigne to lightweight pursuing cleanliness in accorance with ISO stanar. The features of manual valves are the lightness of operation with extremely low operation torque an low flow resistance when fully opene. There are EPDM materials in accorance with FD stanar an silicon rubbers conforming to Foo Sanitation ct for seat ring materials, an can be selecte in accorance with the conitions for use. Flui ontacting Parts Material Seat Ring Material Surface Finish onnection Stanar Max. Working Pressure 2 Major Dimensions R-MS: Manually Operate utterfly Valves SUS316 Stanar: EPDM, Thermal urability (1, 30 min, once a ay, with no-operation) Option: Silicon Rubber (Please contact us for specifications) Insie: #320 #00 uffing Outsie: Shot Finish Ferrule Screw in accorance with ISO stanar 0.7 MPa There are 7 stoppers with lock (0,, 30, 5, 60, 75, 90 ) in the irection from full open to full close for position setting of valve for ajusting the valve position. If fine ajustments are require, an ajustable stopper (option) can be attache for non-step ajustment of position. R-PW: Pneumatically Operate utterfly Valves (Double cting) Nominal Size (DN) 1 2 E Safety Instructions Nominal Size (DN) 1 2 E F (1S) (1S) (1.5S) (1.5S) (2S) (2S) (2.5S) (2.5S) (3S) (3S) (S) (S) R-PS: Pneumatically Operate utterfly Valves (Single cting) Nominal Size (DN) 1 2 E F (1S) (1.5S) (2S) (2.5S) (3S) (S)

37 -. Power & Granule / Tablet Discharge Valves 1 Features [Power & Granular Prouct Discharging] Sanitary utterfly Valves The main parts are mae of stainless steel an buff grin finishe on inner/outer surfaces, that provies no ahesion of power & granular prouct an excellent in washability. ight-weight esign provies the ease of attaching an etaching on the containers an piping. option of clamp type allows the quick assembly/isassembly an easy washing. Stanar Specifications Type Nominal Size (DN) Valve Seat ir-tightness Shell Test Working Temperature onnection Stanar D507-SI (.5S) 300(12S) 3 kpa 0.05 MPa Orinary Temperature (Washable with hot water up to ) Ferrule Type (DN 200: ase on ISO/IDF) (DN0, 300: for iscussion) utomatic Valve: ontact us for manufacturing of pneumatically operate ON- OFF valves. pplicable only for power & granular ischarging. io-lean Diaphragm Valves for Dea Spaces 2 Features [Tablet Discharging] Sanitary Dampers The main parts are mae of stainless steel an buff grin finishe on inner/outer surfaces, that provies no ahesion of tablets an are excellent in washability. Safe ischarging of tablets ensure by optimum shape an structure preventing the tablets from remaining. The tables are fe while the amper is close an the amper is opene for ischarging. The structure is esigne in such a way that the tablets are not crushe. stopper at the closing position securely maintains the precise position. Stanar Specifications Type Nominal Size (DN) onnection Stanar D507D 0 (6.5S) Ferrule Type (ase on ISO/IDF) Power & Granule / Tablet Discharge Valves Sanitary Valves lean Room Relate Technical Materials Safety Instructions Please refer to a catalog SNITRY TYPE PRODUTS FOR MEDI PNT as well for etails of proucts. 37

38 io-lean Diaphragm Valves for Dea Spaces -5. Ultra-High irtight Dampers 1 Features Features of ir tightness of Zero eakage Non-Sliing structure of isk an seat prevents wear ue to operation an maintains the long-term air tightness. ll the parts contacting conitioning air are mae of stainless steel (SUS30). In aition, metal touch closing action of valve seat reuces eterioration an that will maintain the air tightness for a long perio. Main pplications io, general aseptic room, other cleaning workrooms an ucts for air conitioning that may be sterilize. When the contamination ue to entrance of outoor air has to be prevente. Work rooms or laboratories the air exhausting from the room has to be avoie. Experimental clean animal breeing room an the test research laboratory that use it. 2 Prouct Specifications Stanar Specifications Main oy Disk Materials Size [mm (inch)] Working Temperature Range Operation Type SUS30 (Metal Touch) 200 (8) 650 (26) 5 70 Stanar: Electrical Operation Option: ever Hanle, Worm Gear, Pneumatic Operation Sanitary Valves lean Room Relate Ultra-High irtight Dampers Electrically Operate Device Specifications Device Type Damper Size Open/lose Time 50/60 Hz Power Supply Output Space Heater Thermal lass mbient Temp. SRH-007 SRH rectangular rectangular 18/ sec. 36/30 sec. 18/ sec. 36/30 sec. V 200V 10W 0W Open/close status inication is available using the auxiliary contacts. The extene open/close time is available by aing a timer, etc., on the operation panel. 8W lass-e Technical Materials Pressure oss with regar to Flow Velocity by Port Diameter 0 Installation Posture Posture of amper installation can be either upright, sieways, or upsie own, but the electrically operate types are not installe upsie own ue to structural reason. Others Safety Instructions Pressure oss (Pa) The following items will be confirme when the customer is inquiring or orering this amper, regarless of a new installation or an implementation to existing equipment: q Duct Size w Flow velocity, static pressure, flow rate in uct e Operation Type r Static pressure when reverse flow exists in airflow t Power source specifications use (for electrical operation) Duct Flow Velocity (m/s) (Pressure oss when HEP filter final resistance of 0. kpa is applie) 38