ASSA High Security Locks 2012 Canadian Price List

Transcription

1 ASSA High Security Locks 2012 Canadian Price List

2 Page: 1 Table of Contents Page General Information...2 Keys and Keying...8 Mortise Cylinders...10 High Security Mogul Cylinders...14 Rim Cylinders...16 Mortise & Rim Interchangeable Core Cylinders...18 Key-in-Knob/Lever Cylinders...20 Deadbolts...24 Auxiliary Locks...28 Padlocks...34 Profile Cylinders...38 Pin Kits, Tools & Accessories...40

3 Page: 2 General Information The ALPHA Twin 6000 System, The ALPHA Twin Exclusive System and The Twin Exclusive Cylinder Program ASSA introduced the ALPHA System of key control programs to meet the security requirements of locksmiths, distributors and end users. The Twin Exclusive System is an extension of the Twin 6000 patent. The Twin Exclusive was introduced as an upgrade to the ASSA Twin 6000 program, introducing new patented keyblanks based on the patent and new key profiles offering a low cost advantage for extending patent protection for the end user. The system consists of virtually the same programs as ALPHA and Cylect. Briefly, the system consists of four programs: TEL/Gamma Locally exclusive keyways for locksmiths TER/Beta Regionally exclusive keyways for locksmiths TED/Delta Nationally exclusive keyways for distributors TEE/Alpha Regionally exclusive keyways for end-users, sold through normal channels of distribution. The Cylect Cylinder Program The was introduced as an upgrade to the ASSA Twin 6000 program, introducing new patented keyblanks and key profiles. The system consists of virtually the same programs as ALPHA: C2L Locally exclusive keyways for locksmiths C2R Regionally exclusive keyways for locksmiths C2D Nationally exclusive keyways for distributors C2E Regionally exclusive keyways for end-users, sold through normal channels of distribution. Keyway Information Each key control program in the ALPHA and systems utilizes a standard cylinder plug profile (broaching). Various sidebar codes are used to create different keyways. Keyblanks produced after August 1988 are stamped with complete keyway code, e.g., Please include keyway code and profile when ordering keys, keyblanks and cylinders, except SNS cylinders. (See Cylinder form, below). The Twin Pro Cylinder Program The Twin Pro program was introduced in 2003 as ASSA s highest level of controlled security in its delivery process. Twin Pro product is drop shipped only from the factory and is available to End Users and ASSA Certified Service Centers. Twin Maximum Cylinder Program The Twin Maximum program released in late 2005 has features that none of our other systems offer. The most advanced secure UL 437 Listed cylinder ever produced. A non UL version is offered for less secure doors. This system is designed to interface with the new C4 CLIQ access control cylinder with full audit trail features for the cylinders and keys. C4 CLIQ Cylinder Program Concept 4 is the most advanced access control system designed for a stand alone cylinder and key in the industry today. Offers time zoning, audit trial for cylinder and key. Interface with HID Prox systems in multiple formats. Offered in Twin Maximum only. Cylinder Form ASSA Twin locks and cylinders are available in three different forms: COMP (Complete) Keyed-different items include two cut keys per cylinder. Keyed-alike items normally include two cut keys per cylinder. SUB (Sub-assembled) Uncombinated cylinder includes sidebar mechanism, but no tumbler pins, springs or keyblanks. Pin chamber closure strip, plug and screws provided. SNS (Sub, No sidebar) Uncombinated cylinder without sidebar and sidebar springs. Includes sidepins, sidepin springs, standard tailpiece items and pin chamber closure. When ordering ASSA Twin locks and cylinders, be sure to indicate CYLINDER FORM.

4 Page: 3 General Information Red Core ASSA provides temporary construction cores (red cores) for its interchangeable core cylinders upon request. Red cores are $ list and upon return to ASSA, credit will be issued for the full invoiced amount less a 50% handling fee. Request for credit must be made in writing to ASSA Customer Service referencing the original invoice upon which the red cores appear. KEYS ARE NOT INCLUDED IN THE PRICE OF THE RED CORE AND ARE NOT ELIGIBLE FOR RETURN. All cut keys are invoiced at $17.00/ea list each. To order interchangeable core cylinders with temporary cores, specify cylinder model number, Cam, finish, by RED CORE, example, 6552ICR-1 x 626 x RED CORE. Cylinder will be charged at COMP price. To order red core separately, specify 70600ICR. Specify change keys as TWIN-KD-RED and control keys as TWIN-CT-RED. Master Keying ASSA Twin locks and cylinders may be master keyed to meet virtually any requirement. Contact the Key Records Department to discuss special needs. Master keying and bitting charges are shown on page 8. FINISHES Standard finishes are shown below. Antique brass (609) is available for deadbolts only. ASSA Equivalent BHMA Symbol U.S. Symbol Euro Finish Description 625 US Bright Chrome 626 US 26D 13 Satin Chrome 605 US 3 20 Bright Brass 606 US 4 23 Satin Brass 609 US 5 47 Antique Brass 624 US 10B 46 Dark Oxidized 612 US Satin Bronze Special Function Cylinders ASSA offers two special function cylinders most commonly used in the Detention market. One is a directional cylinder, which is operated bi-directionally by one key and in one direction only (clockwise or counterclockwise) by a subordinate key. This special function is accomplished by a modification to the cylinder plug. The necessity for this product is clear; to provide functionality in the system design. However, due to the physical modification of the plug when used in a master key system, the potential size of the master key system will be reduced. The second special function is a limited rotation cylinder. This cylinder requires two modifications and will be used in conjunction with a directional function. One key will operate bi-directionally 360 and only one direction (clockwise or counter-clockwise) by a subordinate key stopping at a determined position prior to 180. These modifications will greatly reduce the potential of a master key system. It is essential to indicate all special function cylinders in the initial master key system design. Otherwise they may not be possible as part of the master key system. Special function cylinders are offered in limited models and are indicated by a symbol: Prefixing the model number specifies available in special function. How to order Example Model No. Finish Profile - Side Bar Specify E8551CW (For Directional Cylinders) Specify E8551WL (For Limited Rotation Cylinders)

5 Page: 4 Standard Terms & Conditions of Sale GENERAL INFORMATION DSS Canada, a division of ASSA ABLOY of Canada Ltd. and all of its current and future associated companies, subsidiaries and operating brands (hence forth referred to as ASSA ABLOY DSS Canada) reserve the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion. The terms and conditions contained herein constitute the entire agreement between the parties. Purchase Orders, Quotations ( Quote ) requests, Acknowledgements or the like issued by the Purchaser that have contrary standard terms and conditions are not binding on ASSA ABLOY DSS Canada, unless such terms and conditions are approved in a separate written agreement by ASSA ABLOY DSS Canada s authorized representatives. In the event of an acceptance of Purchaser s Purchase Order by ASSA ABLOY DSS Canada, the Purchaser agrees that such acceptance is solely conditioned on Purchaser s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the Purchaser s Purchase order. The terms and conditions in Purchaser s Purchase Order which conflict with terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between ASSA ABLOY DSS Canada and the Purchaser. In the event that ASSA ABLOY DSS Canada does not enforce or require strict performance of any term or condition hereof, or of any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of ASSA ABLOY DSS Canada to enforce or require strict performance of such term or condition in the future. Prices: All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of order acceptance. Possession of this price list does not constitute an agreement to sell. Acknowledgements, invoices and quotations are on an Errors and Omissions Excepted basis (commonly referred to as E.O.E.). We reserve the right to correct clerical, stenographic and other obvious errors at any time. Terms: 2% tenth of the month following, net thirty (30) days after statement date. It is understood that ASSA ABLOY DSS Canada may impose and charge a finance charge of 2% per month or the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally, the Customer shall be responsible for all collection costs, court costs and reasonable attorney s fees in connection with the recovery of any delinquent amount. Minimum Invoice: Minimum invoice for complete product is $ net product value. The minimum invoice for parts orders is $ net product value. Any orders not totaling these minimums will be invoiced at the minimums. This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated Bitting Lists. Same day order expedites will be invoiced at book less 50%. Quotations: If ASSA ABLOY DSS Canada elects to offer a Quote, such Quote will be valid for ninety (90) days. Complete shipment of the order must be accepted by Purchaser within nine (9) calendar months from the date of issuance. The Quote number and project name must be referenced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a Quote copy attached to the order or the Quote number written on the order will have a service fee of $75.00 net DEDUCTED from any sales credit issued for the difference in discount. The Quote is null and void if the Purchase Order does not include ALL product lines listed on the Quote or if the quantities for an item covered by the Quote deviate by 10% or more. The Purchaser will have to solicit a new quotation. Changes to original quote will be accepted up to thirty (30) days from the date of the original quote. All changes must reference the original quote number. With the issuance and acceptance of a Quote for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred to any Distributor not authorized by ASSA ABLOY DSS Canada to sell its products. This would be inclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor s ineligibility for Quotes, or other actions in ASSA ABLOY DSS

6 Page: 5 Standard Terms & Conditions of Sale Canada s discretion. ASSA ABLOY DSS Canada and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a Distributor s request to quote a price other than ASSA ABLOY DSS Canada s standard list price and regardless of whether ASSA ABLOY DSS Canada or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders. Special Orders: Products not catalogued or listed in this price book will be considered as special products, and will not be manufactured without prior approval from ASSA ABLOY DSS Canada. A minimum special handling charge of $50.00 will be added for non-catalogued product. Any additional labour or material required will be charged accordingly. Special products require special handling, and therefore standard lead times may not apply. Please consult with your Sales Representative for further details. High Security Orders: To ensure proper control of End User restricted Products, ASSA ABLOY DSS Canada requires that the End User complete a Delivery of Controlled component form indicating to whom the product will be shipped to upon leaving the factory or the distribution centre. All orders must be accompanied with a current copy of the Authorization form and must be signed by the proper authorized personnel whose name(s) is on file with ASSA ABLOY DSS Canada. High Security products are defined as high security key blanks, cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts.assa ABLOY DSS Canada reserves the right to request authorization from the end user if necessary before the order is processed. Changes / Cancellation of Orders: Changes or cancellations to a non stock order that has been released to production will be subject to a charge of costs for material and labour expenses that have been incurred prior to notification from Customer. Handling charges are billed on Customer s original order. All change requests for Mercury or Turbo goods must be submitted in writing to Customer Service within two (2) business days of receipt of acknowledgement of the order. In those instances where a cancellation is accepted, ASSA ABLOY DSS Canada reserves the right to make a reasonable cancellation charge based on expenses incurred. Packaging: Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardware to be used on a specific hardware project. Delivery: Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keying information, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtaining the necessary information for order processing. Manufacturing lead time will begin once all information is received to process an order. ASSA ABLOY DSS Canada will use reasonable efforts to deliver products as estimated, but makes no guarantee as to delivery dates. ASSA ABLOY DSS Canada will not be liable for back charges incurred based on availability of product or as a result of delays in delivery caused by insufficient information required to process an order. ASSA ABLOY DSS Canada will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall ASSA ABLOY DSS Canada be liable or accountable for consequential damages due to failure of delivery. Unless your order specifies otherwise, partial shipments will be made on or after the scheduled delivery date. Terms of Shipment: All products are shipped FOB the factory or the distribution center unless otherwise agreed to in writing from ASSA ABLOY DSS Canada. Title to and risk of loss product shipped is the responsibility of the purchaser and delivery is deemed to be complete upon transfer of the product to a common carrier. Carriers carry limited insurance. If the customer requires additional insurance coverage please contact our customer service department. All claims for shortages and damage are the responsibility of the purchaser. ASSA ABLOY DSS Canada will assist the Purchaser with documentation necessary to make a claim if requested to do so by the purchaser.

7 Page: 6 Standard Terms & Conditions of Sale ASSA ABLOY DSS Canada will ship via the best possible carrier. Shipments at the customer s request will be prepaid and any up-charge (actual cost less the amount negotiated by ASSA ABLOY DSS Canada) will be added to the invoice. Management. A minimal restocking fee of 50% will be charged. Upon receipt and verification by ASSA ABLOY DSS Canada that the returned merchandise is in saleable condition and that the material can be returned to the original manufacturer. Claims: In the event of ASSA ABLOY DSS Canada or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders must be submitted in writing to Customer Service within thirty (30) days from receipt of material. Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier. Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a ASSA ABLOY DSS Canada Customer Service Representative upon submittal of the order. ASSA ABLOY DSS Canada will obtain requested insurance and the additional cost will be included on Customer s invoice. Invoice Deduction: An ASSA ABLOY DSS Canada Sales Representative or Customer Service Representative must be notified of any disputed invoices within thirty (30) days from the date of invoice. Deductions should only be taken for the disputed amount and the balance of the invoice is due and payable within standard payment terms. Returned Goods: No Material is to be returned to our facilities without prior written approval from customer service. It is the policy of ASSA ABLOY DSS Canada to not accept returns of any materials that are correctly furnished as per the Distributor s Purchase Order. Mercury and Turbo material may be returned with approval, if ASSA ABLOY DSS Canada believes the product is resalable. All such product must be returned in its original unmarked carton. The goods must have been shipped and invoiced in the previous sixty (60) days. Returns will be at the distributor s expense. The goods returned will be subject to inspection and a minimum 20% restocking fee will be applied to compensate for the cost of inspection, repacking and handling. Return of product due to customer order error or accommodation must be pre-arranged with ASSA ABLOY DSS Canada and approved in writing by Sales Defective goods that are out of warranty period will not be accepted for return. Products that are master-keyed, special orders, key bitted will not be accepted under any circumstances, unless the product is determined to be defective. Procedure: Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY DSS Canada are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible. Return the authorized merchandise within sixty (60) days from the date of RGA issuance. Return shipments must be freight prepaid to the distribution centre (at time some directions may apply to return the goods to the original manufacturer) ASSA ABLOY DSS Canada is not liable for damages to product during shipping. No credit may be taken or issued prior to RGA approval and receipt of product. All defective goods within the terms of our limited warranty may be returned for repair or replacement only. Taxes: Prices do not include any present or future Federal, Province, or Local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or any services performed in connection herewith. Governing Law: The rights and obligations of the parties shall be governed by the laws of the Province of Ontario, excluding any conflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Limited Warranty: ASSA ABLOY DSS Canada represents and warrants the products against defective material and workmanship under normal use and service. ASSA ABLOY DSS Canada further warrants the Finish to meet BHMAC quality standards at the time of delivery.

8 Page: 7 Standard Terms & Conditions of Sale This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-assa ABLOY DSS Canada products or parts. The only liability of ASSA ABLOY DSS Canada in tort or contract whether under this warranty or otherwise, shall be limited to the repair or replacement of any product or component part which shall prove defective as covered by this warranty, within the stated time period listed below, after delivery to the original purchaser. The items covered by the Limited Warranty and the warranty period are shown in the accompanying schedule(s). ASSA ABLOY DSS Canada will not pay for the cost of repair performed other than in accordance with this warranty. Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective as covered by this warranty. A brief description of the defect will be required. Product will be examined upon return. In the event such examination reveals a defect covered by this warranty, the product will be repaired or replaced. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ASSA ABLOY DSS Canada and its subsidiaries, associated companies and partners SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORI- TY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS WARRANTY. Except as expressly set forth ASSA ABLOY DSS Canada makes no other representations or warranties, expressed or implied at law or in equity, with respect to the products or their characteristics, quality or performance, including without limitation, the implied warranties of merchantability, fitness for a particular purpose or non infringement of any intellectual property rights of third parties and any such representations and warranties are hereby expressly disclaimed. SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE. Indemnity: Purchaser shall indemnify ASSA ABLOY DSS Canada and hold ASSA ABLOY DSS Canada harmless against all claims, liability, loss or other damages (including costs, legal or otherwise incurred by ASSA ABLOY DSS Canada) to all persons for injury of any nature, including sickness and/or death, property damage at the time of delivery or after when the product is no longer in ASSA ABLOY DSS Canada possession or control. Force Majeur: ASSA ABLOY DSS Canada shall not be liable for its failure to perform due to any contingencies beyond its control, including but not limited to acts of God, fires floods, wars, sabotage, accidents, labour disputes, shortages, government laws, ordinances, rules and regulations. ASSA ABLOY DSS Canada shall not be liable for its failure to deliver due to its inability to obtain materials, equipment failure, labour actions, transportation issues or any similar contingencies. In the event of delays due to the aforementioned contingencies, the date of delivery will be postponed by such length of time as the circumstances dictate. Copyrights and Patents: All products in ASSA ABLOY DSS Canada catalogues, brochures and price lists are either patented, Copyrighted or registered by ASSA ABLOY DSS Canada.

9 Page: 8 Keys and Keying The ASSA Key Records Department carefully designs and records master key systems in compliance with customer requirements and ASSA security policy. System documents are thoroughly detailed, produced, and professionally presented, and should be considered valuable and confidential. Key Records information and service is available as follows: Factory Keyed Cylinders Cylinders pinned by the factory are supplied Keyed Different or if so specified as one of the following options: Master Keyed (Bittings provided at No Charge when requested with the order) per cylinder Keyed Alike/Keyed Different...No Charge Single Keyed Different (Part of MK System) per cylinder Factory Generated Master Key Systems ASSA will provide new master key systems for pinning by the locksmith in accordance with prices below: ON PAPER ON DISK Bittings Bittings & Bittings Bittings & Quantity Only Pinnings Only Pinnings Over 25,000 or more contact Customer Service for quote. These prices are for a hierarchical Master Key System with no Cross-keying of selective keys. For special requirements, contact Customer Service at Systems prior to 1996, contact Customer Service for quote. Disks will be provided in flat ASCII text only. Other Key Charges System Copy Charge (copy of existing system MBCC) ($72.00 net min.) per page System Expansions: Priced as above All Other Systems Charges Billed per Request Standard KD/KA key stamping includes keyway designation code. Standard MK system stamping includes and key symbol. Do Not Duplicate and other special stamping requirements will be priced at 6.00 per stamp. Rekeying Charges Part# Description Price RE-KEY Non-Master Keyed Cylinders RE-KEY-MK Master Keyed Cylinders Factory does not recommend cross-keying and will not warranty any cross-keyed cylinders.

10 Page: 9 Keys and Keying Item No. Description Price ASSA Cut Keys TMAX-KD Twin Maximum Cut Keys KD/KA 19.00/ea TMAX-MK Twin Maximum Cut Keys, In a Master Key System 19.00/ea TPRO-KD Twin Pro Cut Keys KD/KA 17.00/ea TPRO-MK Twin Pro Cut Keys, In a Master Key System 19.00/ea Twin-KD Twin Exclusive/6000 Classic (Specify Profile) Cut Keys KD/KA 19.00/ea Twin-MK Twin Exclusive/6000 Classic (Specify Profile) Cut Keys, In a Master Key System 19.00/ea V-10-KD Cut Keys KD/KA 19.00/ea V-10-MK Cut Keys, In a Master Key System 19.00/ea ASSA Key Blanks Twin Maximum Key Blanks Qty. 100/box 8.00/ea Twin Pro Keyblanks/Sidebar code (specify sidebar code) Qty. 100/box 8.00/ea Twin 6000 Key Blanks (specify sidebar code and profile) Qty. 100/box 8.00/ea E Twin Exclusive Key blanks/sidebar code (specify sidebar code) Qty 100/box 8.00/ea Keyblanks/Sidebar code (specify sidebar code) Qty 100/box 8.00/ea White Code Tags 4.00/ea ASSA Coined Key Blanks Initial die charge /Net minimum key blank quantity each order (Specify profile and side code) 8.00/ea 600 Series Cut Keys & Key Blanks 600-KD Cut Keys KD / KA 19.00/ea 600-MK Cut Keys, In a Master Key System 19.00/ea Key blanks/ Specify profile (UK, UL, UM, PK, PL) 8.00/ea 500 Series Key Blanks Key blanks/ specify profile 8.00/ea 700 Series Key Blanks Key blanks/ specify profile 8.00/ea Cut Key Set CKS-1 V-10 Cut Key Set 62.00/ea ECKS Twin Exclusive Cut Key Set 62.00/ea TPCKS Twin Pro Cut Key Set 62.00/ea TMCKS Twin Maximum Cut Key Set 62.00/ea ASSA C4 CLIQ Keys CLIQ-KD C4 CLIQ Cut Key CLIQ-KDP C4 CLIQ-Cut Key with Proximity tag CLIQ-CK C4 CLIQ C-Key CLIQ-MCKC4 CLIQ Master C-Key CLIQ-CONC4 CLIQ Contact Key CLIQ-PRX C4 HID Prox Key C4 CLIQ Programming Unit & Software CLIQ-END Program Device with Single Site Performer Software Manages C4 CLIQ System CLIQ-END-NT Program Device with Network Performer Software Manages C4 CLIQ System CLIQ-ESDK Executive Sales Demo Kit /Net CLIQ-DEA Program Device with Single Site Performer Software Manages Multiple C4 CLIQ Systems CLIQ-DEA-NT Program Device with Network Performer Software Manages Multiple C4 CLIQ Systems CLIQ-PD C4 CLIQ Programming Device CLIQ-NT-LIC License Upgrade from Single Site to Network Installation CLIQ-TRAINING Off Site Factory Training per day CLIQ-SDK Sales Demo Kit

11 Page: 10 Mortise Cylinders Model#/Cam Notes Size Description Comp Sub SNS V6551- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/8" Mortise Cylinder V6552- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/4" Mortise Cylinder V6553- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/8" Mortise Cylinder V6554- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/2" Mortise Cylinder V6555- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-5/8" Mortise Cylinder V6556- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/4" Mortise Cylinder V6557- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-7/8" Mortise Cylinder V6558- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 2" Mortise Cylinder Twin Exclusive E6551- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/8" Mortise Cylinder E6552- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/4" Mortise Cylinder E6553- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/8" Mortise Cylinder E6554- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/2" Mortise Cylinder E6555- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-5/8" Mortise Cylinder E6556- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/4" Mortise Cylinder E6557- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-7/8" Mortise Cylinder E6558- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 2" Mortise Cylinder Twin 6000 Classic (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/2" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-5/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-7/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 2" Mortise Cylinder Twin Pro (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/2" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-5/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-7/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 2" Mortise Cylinder Available in special function cylinders, see page 3, add $ How To Order ASSA Mortise Cylinders: Example: Model # Cam # Finish Security Form Keyway (Cams 1-6 no extra charge) sub...om7-200 (Cams 7-15 add $8.00 to price of cylinder) Contact Customer Service Department for Keyway Numbers.

12 Page: 11 Mortise Cylinders Model#/Cam Notes Size Description Comp Sub SNS Twin Maximum (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/2" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-5/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-7/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 2" Mortise Cylinder Twin Low L651- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/8" Mortise Cylinder L652- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/4" Mortise Cylinder L653- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/8" Mortise Cylinder L654- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/2" Mortise Cylinder L655- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-5/8" Mortise Cylinder L656- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/4" Mortise Cylinder L657- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-7/8" Mortise Cylinder L658- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 2" Mortise Cylinder Series Classic 651- (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-1/2" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-5/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-3/4" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 1-7/8" Mortise Cylinder (Specify Cam See below for pricing. For Cams 7-15 add $7.00 to Cylinder price) 2" Mortise Cylinder Available in special function cylinders, see page 3, add $ Twin Maximum available with C4 CLIQ Technology, add $ Example: x CLIQ x 626 x Sidebar x Comp How To Order ASSA Mortise Cylinders: Example: Model # Cam # Finish Security Form Keyway (Cams 1-6 no extra charge) sub...om7-200 (Cams 7-15 add $7.00 to price of cylinder) Contact Customer Service Department for Keyway Numbers.

13 Page: 12 Mortise Cylinders Corbin Jumbo, ASSA Segal, ASSA Otis Elevator Mortise Cylinders Model#/Cam Notes Size Description Comp Sub SNS V /8" Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam V /8" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam V /8" Segal Inside Mortise Cylinder with Cam V6551E 1-3/8" Otis Elevator Cylinder Twin Exclusive E /8" Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam E /8" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam E /8" Segal Inside Cylinder with Cam E6551E 1-3/8" Otis Elevator Cylinder Twin 6000 Classic /8" Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam /8" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam /8" Segal Inside cyl. with Cam E 1-3/8" Otis Elevator Cylinder Twin Pro /8" Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam /8" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam /8" Segal Inside cyl. with Cam E 1-3/8" Otis Elevator Cylinder Twin Maximum /8" Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam /8" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam /8" Segal Inside cyl. with Cam E 1-3/8" Otis Elevator Cylinder Twin Low L /8" Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam L /8" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam Series Classic /8" Corbin Jumbo Mortise Cylinder with Corbin Jumbo Cam /8" Corbin Jumbo Mortise Cylinder w/ Cor. Jumbo Clover Cam Available in special function cylinders, see page 3, add $ Twin Maximum available with C4 CLIQ Technology, add $ Example: x CLIQ x 626 x Sidebar x Comp

14 Page: 13 Mortise Cylinder Component Parts Model# Notes Description Price Model# Notes Description Price * 1-1/8" Cylinder Shell * 1-1/4" Cylinder Shell * 1-3/8" Cylinder Shell * 1-1/2" Cylinder Shell * 1-5/8" Cylinder Shell * 1-3/4" Cylinder Shell * 1-7/8" Cylinder Shell * 2" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * 1-1/4" Cylinder Plug * 1-3/8" Cylinder Plug * 1-1/2" Cylinder Plug * 1-5/8" Cylinder Plug * 1-3/4" Cylinder Plug * 1-7/8" Cylinder Plug * 2" Cylinder Plug Twin Pro/Twin Maximum * 1-1/8" Cylinder Shell * 1-1/4" Cylinder Shell * 1-3/8" Cylinder Shell * 1-1/2" Cylinder Shell * 1-5/8" Cylinder Shell * 1-3/4" Cylinder Shell * 1-7/8" Cylinder Shell * 2" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * 1-1/4" Cylinder Plug * 1-3/8" Cylinder Plug * 1-1/2" Cylinder Plug * 1-5/8" Cylinder Plug * 1-3/4" Cylinder Plug * 1-7/8" Cylinder Plug * 2" Cylinder Plug Twin Exclusive/Twin 6000 Classic * 1-1/8" Cylinder Shell * 1-1/4" Cylinder Shell * 1-3/8" Cylinder Shell * 1-1/2" Cylinder Shell * 1-5/8" Cylinder Shell * 1-3/4" Cylinder Shell * 1-7/8" Cylinder Shell * 2" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * 1-1/4" Cylinder Plug * 1-3/8" Cylinder Plug * 1-1/2" Cylinder Plug * 1-5/8" Cylinder Plug * 1-3/4" Cylinder Plug * 1-7/8" Cylinder Plug * 2" Cylinder Plug Corbin Jumbo Cyl. Thread Adapter * Indicates Finished Components. Specify Profile.

15 Page: 14 High Security Mogul Cylinders Model#/Cam Notes Size Description Comp Sub SNS Mogul Cylinders V /8" AirTeq/Norment Cylinder with Mogul Cam V /8" AirTeq/Norment Cylinder with Sargent Mogul Cam V8551BR 1-1/8" R.R. Brink Cylinder with #11 Mogul Cam V8551SS 1-1/2" Southern Steel Cylinder without Cam V8551FA 1-1/2" Folger Adam Cylinder without Cam V8551NA 1-1/2" AirTeq/Norment Cylinder without Cam V8551AD 1-1/2" Adtech Cylinder without Cam Twin Exclusive Mogul Cylinders E /8" AirTeq/Norment Cylinder with Mogul Cam E /8" AirTeq/Norment Cylinder with Sargent Mogul Cam E8551BR 1-1/8" R.R. Brink Cylinder with #11 Mogul Cam E8551SS 1-1/2" Southern Steel Cylinder without Cam E8551FA 1-1/2" Folger Adam Cylinder without Cam E8551NA 1-1/2" AirTeq/Norment Cylinder without Cam E8551AD 1-1/2" Adtech Cylinder without Cam Twin 6000 Classic Mogul Cylinders /8" AirTeq/Norment Cylinder with Mogul Cam /8" AirTeq/Norment Cylinder with Sargent Mogul Cam BR 1-1/8" R.R. Brink Cylinder with #11 Mogul Cam SS 1-1/2" Southern Steel Cylinder without Cam FA 1-1/2" Folger Adam Cylinder without Cam NA 1-1/2" AirTeq/Norment Cylinder without Cam AD 1-1/2" Adtech Cylinder without Cam Twin Maximum Mogul Cylinders M /8" AirTeq/Norment Cylinder with Mogul Cam M /8" AirTeq/Norment Cylinder with Sargent Mogul Cam M8551BR 1-1/8" R.R. Brink Cylinder with #11 Mogul Cam M8551SS 1-1/2" Southern Steel Cylinder without Cam M8551FA 1-1/2" Folger Adam Cylinder without Cam M8551NA 1-1/2" AirTeq/Norment Cylinder without Cam M8551AD 1-1/2" Adtech Cylinder without Cam No Cams offered for 1-1/2" Mogul cylinders Available in special function cylinders, see page 3, add $ How To Order ASSA High Security Mogul Cylinders: Example: Model # Cam Finish Security Form Keyway E Sub Contact Customer Service Department for Keyway Numbers.

16 Page: 15 High Security IC Mogul Cylinders Model#/Cam Notes Size Description Comp Sub SNS Interchangeable Core Mogul Cylinders V8551NAIC 1-1/2" AirTeq/Norment IC Cylinder without Cam V8551BRIC 1-1/2" R.R. Brink IC Cylinder without Cam V8551SSIC 1-1/2" Southern Steel IC Cylinder without Cam V8551FAIC 1-1/2" Folger Adam IC Cylinder without Cam V8551ADIC 1-1/2" Adtech IC Cylinder without Cam Twin Exclusive Interchangeable Core Mogul Cylinders E8551NAIC 1-1/2" AirTeq/Norment IC Cylinder without Cam E8551BRIC 1-1/2" R.R. Brink IC Cylinder without Cam E8551SSIC 1-1/2" Southern Steel IC Cylinder without Cam E8551FAIC 1-1/2" Folger Adam IC Cylinder without Cam E8551ADIC 1-1/2" Adtech IC Cylinder without Cam Twin 6000 Classic Interchangeable Core Mogul Cylinders 8551NAIC 1-1/2" AirTeq/Norment IC Cylinder without Cam BRIC 1-1/2" R.R. Brink IC Cylinder without Cam SSIC 1-1/2" Southern Steel IC Cylinder without Cam FAIC 1-1/2" Folger Adam IC Cylinder without Cam ADIC 1-1/2" Adtech IC Cylinder without Cam Twin Maximum Interchangeable Core Mogul Cylinders M8551NAIC 1-1/2" AirTeq/Norment IC Cylinder without Cam M8551BRIC 1-1/2" R.R. Brink IC Cylinder without Cam M8551SSIC 1-1/2" Southern Steel IC Cylinder without Cam M8551FAIC 1-1/2" Folger Adam IC Cylinder without Cam M8551ADIC 1-1/2" Adtech IC Cylinder without Cam ASSA 1-1/2" Temporary Interchangeable Red Core Mogul Cylinders 8551NAICR 1-1/2" AirTeq/Norment IC Cylinder without Cam BRICR 1-1/2" R.R. Brink IC Cylinder without Cam SSICR 1-1/2" Southern Steel IC Cylinder without Cam FAICR 1-1/2" Folger Adam IC Cylinder without Cam ADICR 1-1/2" Adtech IC Cylinder without Cam For temporary cores refer to Red Core on page 3. High Security Mogul Component Parts Model Description Price /8" Twin Exclusive Mogul Cylinder Plug /2" Twin Exclusive Mogul Cylinder Plug /8" Mogul Cylinder Plug /2" Mogul Cylinder Plug /8" Twin Maximum Mogul Cylinder Plug /2" Twin Maximum Mogul Cylinder Plug DUM 1-1/8" Mogul Dummy Cylinder SSDUM 1-1/2" Mogul Dummy Cylinder /2" Mogul IC Housing /8" Mogul Cylinder Shell /2" Mogul Cylinder Shell Cam Adaptor for 1-1/2" Cylinder Mogul Cylinder Plug Cover Plate Mogul Chamber Screw Wrench 3.00 To order Interchangeable Cores separately see page 18 for details.

17 Page: 16 Rim Cylinders Model#/Tailpiece Notes Description Comp Sub SNS Rim Cylinders V6551- (Specify Tailpiece) 1-1/8" Rim Cylinder V7551- (Specify Tailpiece) Corbin Jumbo Rim Cylinder V8551- (Specify Tailpiece) ASSA Mogul (Detention) Cylinder VS6551- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) Twin Exclusive Rim Cylinders E6551- (Specify Tailpiece) 1-1/8" Rim Cylinder E7551- (Specify Tailpiece) Corbin Jumbo Rim Cylinder E8551- (Specify Tailpiece) ASSA Mogul (Detention) Cylinder ES6551- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) Twin 6000 Classic Rim Cylinders (Specify Tailpiece) 1-1/8" Rim Cylinder (Specify Tailpiece) Corbin Jumbo Rim Cylinder (Specify Tailpiece) ASSA Mogul (Detention) Cylinder S6551- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) Twin Pro Rim Cylinders (Specify Tailpiece) 1-1/8" Rim Cylinder (Specify Tailpiece) Corbin Jumbo Rim Cylinder S6151- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) Twin Maximum Rim Cylinders (Specify Tailpiece) 1-1/8" Rim Cylinder (Specify Tailpiece) Corbin Jumbo Rim Cylinder S8851- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) Twin Low Rim Cylinders L651- (Specify Tailpiece) 1-1/8" Rim Cylinder L751- (Specify Tailpiece) Corbin Jumbo Rim Cylinder LS651- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) Series Rim Cylinders 651- (Specify Tailpiece) 1-1/8" Rim Cylinder (Specify Tailpiece) Corbin Jumbo Rim Cylinder S651- (Specify Tailpiece) Special SARGENT Cylinder (Drilled for SARGENT Devices) Note: All rim cylinders are supplied with a spring loaded collar. Available in special function cylinders, see page 9, add $ Twin Maximum available with C4 CLIQ Technology, add $ Example: 8851-H x CLIQ x 626 x Sidebar x Comp

18 Page: 17 Rim Cylinder Component Parts Model# Notes Description Price * SARGENT Drilled Rim Shell * 1-1/8" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug Twin Exclusive/Twin 6000 Classic * SARGENT Drilled Rim Shell * 1-1/8" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug Twin Pro/Max * SARGENT Drilled Rim Shell * 1-1/8" Cylinder Shell * Corbin Jumbo 1-1/8" Shell * 1-1/8" Cylinder Plug * Indicates Finished Components. Specify Profile. Rim Cylinders Ordering Information How To Order ASSA Rim Cylinders: Example: Model # Tailpiece Finish Security Form Keyway H Sub...OM7-200 Contact Customer Service Department for Keyway Numbers. Rim Cylinder mounting plates, screws included with cylinder. All items available separately below: Part No. Description Price Rim cylinder mounting plate ea Rim cylinder mounting screws /pr Kit, includes plate and 2 screws ea Rim cylinder collar rings (Finish 605, 624 & 626 ONLY) ea Horizontal & Vertical Rim Tailpiece Kit, includes Kit /ea Lazy Motion Rim Tailpiece Kit, includes Kit /ea Aluminum blocking rings, finish 626 or 624 ONLY Part No. Thickness Price /4" ea /8" ea /2" ea Adjustable collar ring, Item No , finish 626,605 or 624 ONLY, Hardened collar ring, Item No , finish 626 or 624 ONLY, Corbin Jumbo Collar, Item No , finish 626, ONLY