Planetary Gearboxes for High Outputs
|
|
- Aileen Walton
- 6 years ago
- Views:
Transcription
1 Planetary Gearboxes for High Outputs Manufacturer: Wolfgang Preinfalk GmbH Planetary gearboxes for maximum transferred power of 690kW in three type series and two versions (with the bevel gear or without the bevel gear) The gearboxes are manufactured in the explosion-proof version SNM 2. All the connection dimensions are according to the DIN standard. Table of Maximum Transferred Power (kw) by the Gear Ratio (i) and Input Speed 1470 r.p.m.: Gear Z 45 Z/X Ratio PKPL PSPL PKPL PSPL PKPL PSPL PKPL PSPL PKPL PSPL 16 : : : : : : : Table of Weights (kg): Weight in kg Type Z 45 Z/X PSPL KPPL Table of the Connecting Dimensions: Type Connecting Dimensions PSPL 15 inner gearing N 190 x 10 x 18; DIN 5480 PKPL 15 inner gearing N 190 x 10 x 18; DIN 5480 PSPL 25 inner gearing N 220 x 10 x 20; DIN 5480 PKPL 25 inner gearing N 220 x 10 x 20 x 7H; DIN 5480 PSPL 35 inner gearing N 240 x 10 x 22; DIN 5480 PKPL 35 inner gearing N 240 x 10 x 22; DIN 5480 PSPL 45 Z inner gearing INT 28Z x 10m x 30P x 7H; GB PKPL 45 Z inner gearing INT 28Z x 10m x 30P x 7H; GB PSPL 45 Z/X outer gearing EXT 28Z x 10m x 30R x 7H; GB/T PKPL 45 Z/X outer gearing EXT 28Z x 10m x 30R x 7H; GB/T
2 Lifting points drive Centering Centering dipstick drive Lifting points
3 Lifting points drive Centering centrování dipstick drive Lifting points
4 Lifting points drive Centering Centering dipstick drive Lifting points
5 Centering pump dipstick Inlet with overpressure valve drive Lifting points Centering pump dipstick Inlet with overpressure valve drive Lifting points
6 Lifting points drive Lifting points pump drive
7 Centering Lifting points drive External toothing Lifting points pump With overpressure valve dipstick External toothing drive
8 Flexible Single Clutch Type SPOA The flexible single clutch serves for the transmission of the torsion moment between the and the gearbox. It is dedicated for a lower torsion moment and for the output of the electro- up to 100kW and speed r.p.m. The main advantage of this clutch is its high axial and radial compliance: - axial compliance ΔKr short-term 4,0 mm long-term 2,0 mm - radial compliance ΔKa short-term 0,4 mm long-term 0,2 mm - angular compliance ΔKu short-term 2 long-term 0,5 Marking Output D1 (mm) D2 (mm) D3 (kw) gear-box Ø Ø (mm) SPOA SPOA SPOA SPOA SPOA SPOA SPOA Example of marking: SPOA-D1-D2-L By request it is possible to supply a modified version with: L max. : 500mm D1 max., D2 max. : 80mm
9 Flexible Double Clutch Type SPOK The flexible double clutch serves for the transmission of the power from 75 up to 250kW by the revolutions from 800 to 3000 r.p.m. The main advantage of this clutch is its high axial and radial compliance: - axial compliance ΔKr short-term 10 mm long-term 4,5 mm - radial compliance ΔKa short-term 0,8 mm long-term 0,5 mm - angular compliance ΔKu short-term 5 long-term 1,5 Marking Max. transmitted output by 1500 r.p.m. D Dm D1 D2 (kw) (mm) (mm) (mm) (mm) SPOK ST-(A) 75kW SPOK ST-(A) 100kW SPOK ST-(A) 200kW SPOK ST-(A) 250kW For placing an order of non-standard clutch SPOK-D2-D1-L2-L1-(A)-kW (A) 1 - without the braking disc 2 - with the braking disc
10 Supporting Cover Type NK The supporting cover serves for the flange connection of the and the gear-box. It is adapted for use of the friction blocking appliance, the tightening device and eventually the brake. The supporting cover is manufactured in five versions and it is equipped with a flange for various types of devices see the table below. Marking NK600 NK740 Version D2 L D1 [mm] [mm] [mm] P P P P P Item 1 supporting cover Item 2 spacing flange for versions P1, P2 D1 D2 L Ø electro- circle span Ø gear-box circle span total length of the supporting cover (including the spacing flange) The versions P1 and P2 are always with the spacing flange For the version P3: L1=L Examples of the marking: NK600 P2, NK740 P3 In case of requirement for another design, it is necessary to inform us about the and the gear-box types and their connecting dimensions.
11 Clutch Configuration Type S-SPOK The clutch configuration contains the clutch type SPOK itself, the supporting cover, the friction blocking appliance, eventually the week for the tension equipment. The maximum transferred output is 250kW. The clutch configuration S-SPOK is used for flexible connection above all for planetary gear-boxes sizes 15 and 25 and for gear-boxes for phase conveyors according to RAG for electro- output from 160kW to 315kW. The clutch configuration consists of the clutch SPOK, the supporting cover, the friction blockin appliance, eventually the gear-wheel for the tightening device. The configurations are assembled for the following and gear-box types: Type dskg315 M4B 2SGF(L)315S-4 2SGF(L)315L 12/4 160kW DVM 355 LK23 160kW 2SGS355M12-4 DVM355LK kW STKG355M4 2SGP(L)355L-4 2SGS355 12/4 DVM355L kW 2SGS 400S-12/4 DVM400LK412 dslh 355 H4Ds 315kW PKPL 15 S-SPOK-160-P1 S-SPOK-160-P2 S-SPOK-200-P1 S-SPOK-250-P1 - - dslh355h4es 400kW PKPL 25 S-SPOK-160-P3 S-SPOK-160-P4 S-SPOK-200-P2 S-SPOK-250-P2 S-SPOK-315-P2 S-SPOK-400-P2 PKPL S-SPOK-250-P4 S-SPOK-315-P4 S-SPOK-400-P4 K1SH 450 K2SH 450 K2SF K1SH 160 S-SPOK-160-P5 S-SPOK-160-P6 S-SPOK-200-P3 S-SPOK-250-P3 S-SPOK-315-P3 S-SPOK-400-P3
12 Friction Blocking Appliance BZ 1 The appliance serves for optimal pre-stress generating in the fuse chains of drag conveyors. It can work in the ambient with gas explosion hazard. The pre-stress in the fuse chains is called by electro-s of the conveyor drive. The counterpart is the clutch friction disc. The main parameters: manual adjustment of the requested pre-stress according to the conveyor length and used chain; friction disc revolutions: r.p.m.; max. pre-stress 180kN; installation on the supporting cover of the conveyor; range: 0-2,5 MPa
Drag Conveyors BASIC TYPES. We offer the following types of drag conveyors: Wall (face) conveyors: Gathering (under-face) conveyors:
Drag Conveyors BASIC TYPES We offer the following types of drag conveyors: Wall (face) conveyors: These conveyors are determined for work in forefields of underground mines. The lengths of the conveyors
More informationHigh Performance: EPR Series
High Performance: EPR Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPR Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications
More informationBelt Conveyors CLASSIFICATION BELT CONVEYORS
BELT CONVEYORS Belt Conveyors CLASSIFICATION Conveyors of DPT Series: Description: Conveyors with the drawing drum seating outside the drum, the gear-box with a free bearing on the drum shaft either through
More informationGEAR-COUPLINGS. Series LX GLX S-NX
GEAR-COUPLINGS Series LX GLX S-NX CONTENTS Application 3 Quality and production 3 Design and characteristics 3 selection 4-5 Key connections 6 Shrink-fit connections 7 Standard design with one-piece housing
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationEXAMPLES INTRODUCTION
AMEM 316 (AUTO308): Machine Elements I EXAMPLES INTRODUCTION EXAMPLES INTRODUCTION Example 1 (Hamrock p.53) As shown in figure 2.12(a), a 3m long bar is supported at the left end (B) by a 6 ram diameter
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationHighest Precision: Dyna Series
Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationTORQLIGHT SAFETY COUPLINGS
LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloid gearboxes Planetary gearboxes evel gearboxes Planetary bevel gearboxes Hypoid gearboxes Gear technology Eppinger hypoid gear boxes The compact
More informationCoupling description. Disc pack with bolts
Coupling description RADEX -N couplings are designed to transmit torque between drive and driven components via steel hubs and flexible metallic elements commonly known as discs. The combination of these
More informationLIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm
LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison
More informationFRICTIONAL CONNECTIONS CATALOGUE
FRICTIONAL CONNECTIONS CATALOGUE Reprinting and all other forms of copying, not even partially, is prohibited without permission from Stüwe. Maschinenfabrik GmbH & Co. KG Production: Studio Salewski GmbH,
More informationEXAMPLES GEARS. page 1
(EXAMPLES GEARS) EXAMPLES GEARS Example 1: Shilds p. 76 A 20 full depth spur pinion is to trans mit 1.25 kw at 850 rpm. The pinion has 18 teeth. Determine the Lewis bending stress if the module is 2 and
More informationTorsionally Rigid Disc Couplings
US 05 2016 Torsionally Rigid Disc Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we
More informationNEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e
Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue
More informationBell-house Mounted Arrangement. Highly Flexible K Coupling
Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed
More informationCourtesy of Steven Engineering, Inc - (800) PATENTED
PRECISION RING DRIVE SYSTEMS Based on Nexen s innovative Roller Pinion technology, Nexen Ring Drive Systems come complete with a precision grade, high capacity bearing and drive mechanism in a rigid housing.
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Zykloidgetriebe Planetengetriebe Kegelrad-Planetengetriebe Kegelradgetriebe Hypoidgetriebe Hypoid-Stirnradgetriebe Getriebemotoren Verzahnungsentwicklung
More informationTorsionally elastic couplings
Torsionally elastic couplings Torsionally elastic couplings Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane Rail Wheels
More informationCONTENT. 1. Syllabus 2. Introduction 3. Shaft 4. Coupling. Rigid coupling. Flange coupling. Sleeve (or) muff coupling Split muff coupling
UNIT II 1. Syllabus 2. Introduction 3. Shaft 4. Coupling Rigid coupling CONTENT Flange coupling Protected flange coupling Unprotected flange coupling Marine type flange coupling Sleeve (or) muff coupling
More informationZERO BACKLASH GEARING
ZERO BACKLASH GEARING Based on Nexen s innovative Roller Pinion technology, the Geared Bearing comes complete with a gear and a precision grade, high capacity bearing. With a wide range of sizes and ratios,
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationBM spiral bevel gear boxes
M spiral bevel gear boxes Solid and Hollow Shaft Design ycloidal gear boxes Planetary gear boxes evel gear boxes Planetary bevel gear boxes Hypoid gear boxes Gear technology EPPIGER M bevel gear boxes
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationNODIA AND COMPANY. Model Test Paper - I GATE Machine Design. Copyright By Publishers
No part of this publication may be reproduced or distributed in any form or any means, electronic, mechanical, photocopying, or otherwise without the prior permission of the author. Model Test Paper -
More informationHigh Performance: Dyna-Lite Series
High Performance: Dyna-Lite Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna-Lite Series gearboxes to meet your needs. Page 4 provides a list of commonly requested
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloidal gear boxes Planetary gear boxes evel gear boxes Planetary bevel gear boxes Hypoid gear boxes Gear technology Eppinger hypoid gear boxes
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
More informationGerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
More informationHousing Freewheels for Multimotor Drives 80.1
s for Multimotor Drives 80.1 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg s FKhG for Multimotor Drives for automatic connecting and disconnecting of drives on pumps, fans, generators etc.
More informationMönninghoff electromagnetic tooth clutches
Mönninghoff electromagnetic tooth clutches High torque without slip in compact size Angular synchronisation of input to output possible Torque limiting and other special tooth options readily available
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More information6 5 f2 L7. ØD1j6 ØD12 L21. 2 Model L-Series V-Series
L8 f3 V Series & L Series ØD6 ØD j6 ØD6 L3 L8 f3 ØD1j6 B0 C0 G0 H0 ØD j6 0 3 9 1 1 L D0 J0 ØD1j6 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0,
More informationPin-guided clutch with three flyweights
S-Type Pin-guided clutch with three flyweights Construction and mode of operation 2 5 4 3 3 1 1 5 2 6 4 = Hub = Flyweights = Cylindrical pin = Tension spring = Lining = Clutch drum / Cover disc Low noise
More informationC-SERIES S-SERIES EMA LINEAR ACTUATORS. Metric Machine Screw Jacks.
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS 0i 02 Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence:
More informationBoWex Curved-tooth gear coupling, shaft coupling. BoWex-ELASTIC High flexible flange coupling. MONOLASTIC Single-part, flexible flange coupling
Curved-tooth gear coupling, shaft coupling Torsionally rigid flange coupling U.S. Patent 5,586,938 High flexible flange coupling Single-part, flexible flange coupling EP 0853203 U.S. Patent 6,117,017 Pump
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationDesigns. > > ITK standard material > > ITK42 made of 42CrMo4
Barrel couplings Barrel couplings Industrial Brakes Thrusters Pressure Oil Pumps ouplings Hydraulic Buffers ellular Buffers Rail Pliers Sheaves Hook Blocks rane Rail Wheels Rail lamps Reparation Service
More informationPower Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox.
202 www.powerjacks.com Power Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox. Our expertise has been built on a history of engineering
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26
RE14 6/3.96 Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW RE 14 6/3.96 Standard motor type GMS Standard motor type GMT Short motor type GMTS Contents Name page Characteristics,
More informationShaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
More informationFlexible pin & bush coupling
Technical data KX-D Technical data Torque [Nm] NBR 80 Sh-A GJL Steel Dyn. torsion spring stiffness [Nm/rad] Max. speed Max. speed Rated Max. Vibratory [rpm] with Max. bore [mm] [rpm] with Max. bore [mm]
More informationV Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio
More informationMULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings
MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959
More informationFlexible Couplings 44
Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact
More informationSeries W C D PACKAGING FOOD & BEVERAGE STEEL PULP & PAPER MINING. Cone Drive Operations, Inc. 240 East 12th Street Traverse City, MI 49684, USA
PACKAGING FOOD & BEVERAGE STEEL PULP & PAPER MINING C D Cone Drive Operations, Inc. 240 East 12th Street Traverse City, MI 49684, USA T +1 888 994 2663 E orders@conedrive.com W www.conedrive.com ACCUDRIVE
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space
More informationShaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings
More informationDESCH Mini. Torsionally rigid couplings WV 11 - GB
DESCH Mini Torsionally rigid couplings WV 11 - GB Shaft connector type DESCH Mini-clutch Features The DESCH Mini-coupling is a float-free, torsion proof, bending elastic and, above all, maintenance free
More informationAll-steel gear couplings
GEARex FA, FB and FAB All-steel gear couplings Coupling in accordance with AGMA 9008-B00, high power density For legend of pictogram please refer to flapper on the cover 80 Dimensions Max. finish bore
More informationHighest Precision: Dyna Series
GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested modifications to give you
More informationSpare parts list Pentruder Modular Drilling System
Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M
More informationGAM New Products 2018
GAM New Products 218 GPL ROBOTIC PLANETARY GCL ROBOTIC CYCLOIDAL EPR RIGHT ANGLE BEVEL PLANETARY VP PRECISION PLUS SPIRAL BEVEL GAM Can. GAM Company Overview About GAM Founded in 199 by Gary A. Michalek,
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationHigh Performance: EPL Series
High Performance: EPL Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPL Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications
More informationDamping Engineering Radial Dampers RD 240/241. Radial Damper RD 240/241 with Gear Wheel. Installation and Operating Instructions.
Radial Damper RD 240/241 with Gear Wheel For continuous damping with a revolving chain DICTATOR radial dampers provide continuous damping over unlimited distances. Although designed for sliding doors,
More informationtechnology made in Italy
technology made in Italy GB RD * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission
More informationDescription Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range
Coupling selection Normally the is selected according to the nominal torque ( ) shown in the list of technical data, like all other coupling systems. In all cases the torque ( ) must exceed the maximum
More informationTORSIONALLY RIGID COUPLING
TORSIONALLY RIGID COUPLING Up to 130.000 Nm of torque and 205 mm bore GTR 7 Technology for Safety GTR - torsionally rigid coupling: introduction Made in steel fully turned with standard treatment of phosphating.
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub Code/Name: ME 1352 DESIGN OF TRANSMISSION SYSTEMS Year/Sem: III / VI UNIT-I (Design of transmission systems for flexible
More informationLightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
More informationDYNA GEAR. The highly dynamic servo right angle gearbox.
MS- Gr a es s ne r GmbH & Co. K G THE GEAR COM PAN Y The highly dynamic servo right angle gearbox Internal highlights The design of the DynaGear range has been influenced by extremely varied applications
More informationRCK CLAMPING ELEMENTS
RCK CAMPING EEMENTS SERIES RCK 11 page 6 SERIES RCK 13 7 SERIES RCK 15 8 SERIES RCK 16 9 SERIES RCK 19 10 SERIES RCK 40 11 SERIES RCK 45 12 SERIES RCK 50 13 SERIES RCK 55 14 SERIES RCK 60 15 SERIES RCK
More informationME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism)
ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism) 1) Define resistant body. 2) Define Link or Element 3) Differentiate Machine and Structure 4) Define Kinematic Pair. 5) Define Kinematic Chain.
More informationReducing Backlash / Increasing Rigidity Jaw Coupling Precision Jaw Oldham Helical Beam Disc coupling
Precision Couplings A shaft coupling is a critical element in a robust and durable linear shaft drive. Misalignment of motor and drive shafts can cause loss of precision, noise and premature failure. By
More informationHP High-Performance Gear Units with <2' Adjustable Backlash
Page HP High-Performance Gear Units with
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationDESIGN OF MACHINE MEMBERS - I
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DESIGN OF MACHINE MEMBERS - I (Mechanical Engineering) Time: 3 Hours Max Marks: 75 Answer any FIVE Questions
More informationPOWER TRANSMISSION RIGID COUPLINGS MINI MINI
POWER TRANSMISSION RIGID COUPLINGS 2 RIGID COUPLINGS FEATURES The Mini coupling is a backlash-free, torsion proof, bending elastic and, above all, maintenance-free steel coupling made in one piece. It
More informationHYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
More informationPE Planetary Gearheads
Planetary Gearheads Unparalleled: This planetary gearbox maintains its maximum efficiency even at the highest speeds Planetary Gearheads are notably light and extremely powerful, yet suitable for complex
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationUNIT III TRANSMISSION SYSTEMS CONTENTS: Clutch-types and construction Gear boxes- manual and automatic Gear shift mechanisms Over drive Transfer box
UNIT III TRANSMISSION SYSTEMS CONTENTS: Clutch-types and construction Gear boxes- manual and automatic Gear shift mechanisms Over drive Transfer box Fluid flywheel Torque converter Propeller shaft Slip
More informationSIZES FROM ,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS
LP SIZES FROM 350 20,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS GENERAL INFORMATION ABOUT R+W DISC PACK COUPLINGS: SERVICE LIFE R+W disc pack couplings are fatigue resistant and wear free for an infinite
More informationGoodwin Electronics: Tel: Web:
ZF Maschinenantriebe GmbH Industrial Drives Right angle gearboxes for servomotors 2 Hysteresis brakes Planetary gearboxes Two-speed clutches Customer specific gearboxes Two-speed gearboxes Elevator gearbox
More informationRIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at
117 Table of contents 117 Coupling selection steel laminae coupling 119 Description of coupling 121 General information 122 Types and applications 123 Technical data 124 Standard types 126 Special types
More informationInstallation and Operational Instructions for EAS -Compact overload clutch Type 49_. 4._ Sizes 01 to 3
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents
More informationSemiflex Standard Symbiosis of performance and compact design. Semiflex. The Semiflex series
SE_S_1/06 compact design The Semiflex series Standard F series Bore diameter up to 120 mm Torque ( ) 44 Nm to 7.040 Nm Semiflex Semiflex is a high-precision coupling in a compact design and with no restoring
More informationBEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater.
GENERAL SPECIFICATION INTENT The equipment to be supplied by manufacturer includes the screw pumps, support for the drive unit, profile plates, motors, gearboxes, couplings, guards, upper and lower bearing
More informationSemiflex Compact Plus For extremely axially limited space. Semiflex. The Semiflex series
SE_CP_1/06 The Semiflex series Standard F series Symbiosis of performance and compact design Bore diameter up to 120 mm Torque ( ) 44 Nm to 7.040 Nm Semiflex Semiflex is a high-precision coupling in a
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationCrawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
More informationPK couplings. Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationProduct description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationBEVEL GEAR UNITS ZZ-SERVOLINE
BEVEL GEAR UNITS ZZ-SERVOLINE ZZ-SERVOLINE GEARBOX DESIGN AND FUNCTIONAL FEATURES Gear Ratios i= 3:1 i= 4:1 i= 5:1 i= 6:1 i= 8:1 i= 10:1 i= 12:1 i= 15:1 Spiral Bevel Gear KLINGELNBERG tooth system Hypoid
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationFLENDER Standard Couplings
FLENDER Standard Couplings N-ARPEX FLENDER couplings Catalog MD 10.1 N Edition April 2017 Related catalogs ARPEX MD 10.2 High Performance Couplings Bucket Elevator Drives MD 20.2 E800-K5710-A121-A1-700
More informationPerformances. Heavy duty, planetary to bevel, right-angle, servo gearbox. Up to 350 Nm rated 9
Up to 350 Nm rated 9 Mra line Heavy duty, planetary to bevel, right-angle, servo gearbox Backlash: from 15 to 5 minutes* Hollow shaft, double shaft or quadri-shaft versions available Efficiency: from 91%
More informationSIZES FROM 1, ,000 NM CROWNED GEAR COUPLINGS
BZ SIZES FROM 1,300-348,000 NM CROWNED GEAR COUPLINGS GENERAL INFORMATION ABOUT R+W CROWNED GEAR COUPLINGS: CROWNED GEAR COUPLINGS BZ FIT CLEARANCE Overall shaft / hub clearance of 0.01-0.05 mm TEMPERATURE
More informationVolute Casing Centrifugal Pumps of the Block-Type Construction with Magnetic Coupling
Volute Casing Centrifugal Pumps of the BlockType Construction with Magnetic Coupling ALLMAG Series CMA ATEX 0 a Application For handling toxic, volatile, explosive or other fluids harmful to the environment
More informationSKF Disc Couplings. Selection
SK Disc Couplings The SK disc coupling is the ideal solution in medium to high applications that require torsional rigidity, offer some allowance for misalignment, and do not require lubrication. These
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully
More informationThe two RENK LABECO test stands are intended to provide endurance and acceptance testing for both R&D and post-assembly quality assurance.
October, 200 RENK LABECO Test Systems Corporation Supports Largest Wind Turbine Test Facility with October 28th Groundbreaking at Clemson University Restoration Institute RENK LABECO Test Systems Corporation
More informationPLFN. PLFN Precision Line. The precision planetary gearbox for maximum loads and the highest performance fast and easy to install
Precision Line The precision planetary gearbox for maximum loads and the highest performance fast and easy to install Our features a standardized flange interface for ease of installation. The straightteeth
More informationGreat benefits of using BHS EconTors single diaphragm couplings
Great benefits of using BHS EconTors single diaphragm couplings Great benefits of using BHS EconTors single diaphragm couplings Diaphragm couplings have become state of the art for systems requiring a
More informationChapter 3. Transmission Components
Chapter 3. Transmission Components The difference between machine design and structure design An important design problem in a mechanical system is how to transmit and convert power to achieve required
More informationHydraulic lift crane LR 1110 LR
Hydraulic lift crane LR 111 EN LR 11.2 Concept and characteristics LR 111 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin with improved and ergonomic operating
More informationSuper-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
More information