Parts List. FS3100D Diesel

Transcription

1 Parts List. FS3100D Diesel July

2 TABLE OF CONTENTS For quick supply of spare parts and to avoid any lost time, it is essential to quote the data on the manufacturer s plate fixed to the machine and the part description to be replaced with every order. DESCRIPTION... PAGE NO. Warnings...2 CHASSIS GROUP Diagram 1 - Chassis Assembly, Front Axle Assembly... 6 Diagram 2 - Rear Axle Assembly...7 Diagram 3 - Chassis Group Diagram 4 - Transmission Group Diagram 5 - Accessory Idler Group...12 Diagram 6 - Pointer & Sheave Guard...13 Diagram 7 - Tie Down Kit...14 Diagram 8 - Parking Brake Assembly...15 COWL GROUP Diagram 9 - Water Piping & Switch Group...16 Diagram 10 - Attachment Group...17 Diagram 11 - Electric Water Pump Group...18 Diagram 12 - Depth Indicator Group, Depth Stop Group Diagram 13 - Fuel Line Group, Fuel Tank Group Diagram 14 - Hydraulic Pump Assembly Diagram 15 - Cowl Electrical Group...26 Diagram 16 - Battery Bracket Group, Battery Group...27 Diagram 17 - Speed Control Lever Group, Handle & Switch Group Diagram 18 - Control Panels: Engine & Pump, Instrument Panel Assembly Diagram 19 - Hardware Mounting & Cowl Weldment Diagram 20 - Belt Guard Assembly Diagram 21 - Handle Group ENGINE GROUP Diagram 22 - Air Cleaner Hose Group, Air Cleaner Group...35 Diagram 23 - Engine Group, Engine Group Diagram 24 - Engine Throttle Control Hardware...38 Diagram 25 - Belts & Pulleys, Diagram 26 - Belts & Pulleys Assembly, 26 / Diagram 27 - Bladeshaft Assembly Diagram 28 - Lift Bail Group...42 Diagram 29 - Muffler Heat Shield Kit...43 BLADE GUARD GROUP Diagram 30 - Attach Group, Slip-On Diagram 31 - Blade Guard Assembly - 18 Slip-On, 2 Wide Diagram 31a - Blade Guard Assembly - 18 Slip-On, 3 Wide Diagram 32 - Blade Guard Assembly - 26 Slip-On Diagram 33 - Blade Guard Assembly - 30 Slip-On

3 TABLA DE MATERIAS Para obtener un suministro rápido de piezas de recambio (refacciones) y evitar pérdidas de tiempo, es esencial que se mencionen en cada pedido los datos de la placa del fabricante adosada a la máquina y la descripción de la pieza que se vaya a reemplazar. DESCRIPCIÓN... PÁGINA N Advertencias... 3 GRUPO DE CHASIS Diagrama 1 - Ensamblaje de chasis, Conjunto de eje frontal... 6 Diagrama 2 - Conjunto de eje trasero... 7 Diagrama 3 - Grupo de chasis Diagrama 4 - Grupo de transmisión Diagrama 5 - Grupo de accesorios de piñón...12 Diagrama 6 - Salvaguarda de indicador y polea...13 Diagrama 7 - Juego de anclaje por debajo...14 Diagrama 8 - Ensamblaje de freno de estacionamiento...15 GRUPO DE CUBIERTA DE MOTOR Diagrama 9 - Grupo de tuberías de agua e interruptores...16 Diagrama 10 - Grupo de acoplamiento Diagrama 11 - Grupo de bomba de agua eléctrica Diagrama 12 - Grupo de indicador de profundidad, Grupo de tope de profundidad Diagrama 13 - Grupo de tubería de combustible, Depósito de combustible Diagrama 14 - Ensamblaje de bomba hidráulica Diagrama 15 - Grupo eléctrico de cubierta de motor Diagrama 16 - Grupo de ménsula de batería, Grupo de batería Diagrama 17 - Grupo de palanca de control de velocidad Grupo de mango e interruptor Diagrama 18 - Paneles de control: Máquina y bomba Conjunto de panel de instrumentos Diagrama 19 - Tornillería de montaje y soldadura de cubierta de motor...32 Diagrama 20 - Ensamblaje de salvaguarda de banda...33 Diagrama 21 - Grupo de mango...34 GRUPO DE MÁQUINA Diagrama 22 - Grupo de manguera Air Cleaner, Grupo Air Cleaner...35 Diagrama 23 - Grupo de máquina Diagrama 24 - Dispositivos de control de acelerador de máquina Diagrama 25 - Bandas y poleas, Diagrama 26 - Ensamblaje de bandas y poleas, 26 / Diagrama 27 - Ensamblaje de eje de hoja...41 Diagrama 28 - Grupo de estribo elevador Diagrama 29 - Juego de protector térmico del silenciador del tubo de escape GRUPO DE SALVAGUARDA DE HOJA Diagrama 30 - Grupo de acoplamiento, deslizable...44 Diagrama 31 - Ensamblaje de salvaguarda de hoja - 18 Deslizable, 2 Wide Diagrama 31a - Ensamblaje de salvaguarda de hoja - 18 Deslizable, 3 Wide Diagrama 32 - Ensamblaje de salvaguarda de hoja - 26 Deslizable Diagrama 33 - Ensamblaje de salvaguarda de hoja - 30 Deslizable

4 WARNINGS WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY. Each machine is supplied with an operating instruction manual. Operators and maintenance people of this equipment must read and be familiar with the safety warnings in the operating manual. Failure to obey the warnings may result in serious injury or death. Follow instructions strictly to ensure long service in normal operation. If you do not have an operator s manual (FS3100D ), call TOLL FREE Read the entire operator s manual before operating this machine. Understand all the warnings, instructions and controls. If you do not have an operator s manual (FS3100D ), call TOLL FREE BEFORE operating the machine. Always park the machine on a level surface with the engine OFF and the ignition switch set in the OFF position before performing any maintenance. Let the machine cool down! Disconnect battery! The manufacturer accepts no responsibility caused by unsuitable use or modifications. For repairs and serviced parts, contact your authorized Dimas dealer. This saw was designed for certain applications only. DO NOT modify this saw or use for any application other than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until you have contacted Dimas North America and we have advised you. 4

5 ADVERTENCAS ADVERTENCIA: EL NO RESPETAR ESTAS ADVERTENCIAS E INSTRUCCIONES DE OPERACION PUEDE PROVOCAR GRAVES LESIONES O LA MUERTE. Cada máquina se suministra con un manual de instrucciones de operación. Los operadores y los mecánicos de este equipo deben leer y familiarizarse con las advertencias de seguridad dadas en este manual. El no respetar las advertencias puede provocar graves lesiones o la muerte. Siga las instrucciones al pie de la letra para asegurar una larga vida de servicio durante operación normal. Si no tiene un manual del operador (FS3100D ), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al Lea todo este manual y familiarícese con el funcionamiento de la máquina antes de ponerla en marcha. Entienda todas las advertencias, instrucciones y controles. Si no tiene un manual del operador (FS3100D ), llame a su concesionario Target más cercano. Si se necesitan ejemplares adicionales, lammar SIN CARGO al Siempre estacione la máquina en una superficie plana con el motor APAGADO y el interruptor de encendido puesto en la posición APAGADO (OFF) antes de hacer trabajos de mantenimiento en la máquina. Deje que la máquina se enfríe! Desconecte la batería! El fabricante no se hace responsable del uso o modificaciones indebidas! Para reparaciones y piezas de repuesto, póngase en contacto con el concesionario DB/T autorizado. Esta sierra fue diseñada para ciertas aplicaciones solamente. NO la modifique ni utilice para ninguna otra aplicación salvo aquéllas para las cuales fue diseñada. En caso de dudas respecto a su aplicación, NO use la sierra sin antes haber consultado por escrito a Dimas North America y haber recibido nuestras indicaciones.

6 Diagram 1 - Chassis Assembly, Front Axle Assembly Diagrama 1 - Ensamblaje de chasis, Conjunto de eje frontal Diag Part Description Qty. Loc. No. Req Chassis Assy (complete) Frame Weldment Bearing, Pillow Block 1.0 Dia Bore Front Axle Assy (Incl. Items 5-10) Front Axle Weldment Washer, Flat ID x 2.00 OD x.048 Thk Wheel, 6 Inch Dia x 2 Wide w/ Ball Bearing 2 7a Ball Bearing Set Collar Assembly, 1 ID (Incl. Items 9 & 10) Set Collar, 1 ID Screw, Set Soc Cup Pt UNC x Lockwasher, Split.375 Dia Capscrew, Hex Hd UNC x Nut, Low Hex M12 x 1.75 (7mm Tall) Capscrew, Hex Hd M12 x x 40mm 1 6

7 Diagram 2 - Rear Axle Assembly Diagrama 2 - Conjunto de eje trasero Diag Part No. Description Qty. Loc. Req Rear Axle Assy, (Incl. Items 2-10) Bearing, Pillow Block 1.0 Dia Bore Axle, Rear Weldment Drive Sprocket, 29 Tooth # Capscrew, Hex Hd M6 x 1.0 x 25mm Locknut, Fiber M6 x Key, Square.250 x 2.25 Lg Wheel Assembly (w/ Set Screws) (Incl. Items 9 & 10) Wheel, 8 Inch Dia x 2 Wide Screw, Set Sq Hd UNC x Lockwasher, Split.375 Dia Capscrew, Hex Hd UNC x Capscrew, Hex Hd UNC x

8 Diagram 3 - Chassis Group Diagrama 3 - Grupo de chasis 8

9 Diagram 3 - Chassis Group Diagrama 3 - Grupo de chasis Diag Part Description Qty. Loc. No. Req Chassis Group (Complete) Hydraulic Cylinder 1 2a Cylinder w/ Valve (for CE certified saws only) 1 2b Cylinder 1 2c Valve Washer, Flat.500 SAE Pin, Clevis.50 Dia x 2.25 Lg Pin, Cotter.125 x Pin, Clevis.50 Dia x 3.00 Lg Fitting, Connector #4 Tube x 1.4 NPT Nut, Hex Hd M6 x Eyebolt, M6 x 50mm Bracket, Guard Mounting (Metric) Washer, Flat M Lockwasher, External Tooth, M Capscrew, Hex Hd M10 x 1.50 x 20mm Belt Protector Capscrew, Hex Hd M8 x 1.25 x 30mm Locknut, Fiber M8 x Guide Pen Guide Swivel, M12 x Capscrew, Hex Hd M12 x 1.75 x 100mm Nut, Low Hex M12 x 1.75 x 100mm Washer, Flat M Lockwasher, Split.500 Dia Capscrew, Hex Hd M12 x 1.75 x 40mm Fitting, 45 degree Elbow #4 Swivel Nut Hose Assy, Depth Stop Cylinder Sprocket Assy, 24 Teeth (Incl. Items 28 & 29) Sprocket, 24 Teeth Screw, Set Soc Cup Pt UNC x Key, Square.250 x 1.00 Lg Chain, #40 Roller 1 9

10 Diagram 4 - Transmission Group, Diesel Diagrama 4 - Grupo de transmisión 10

11 Diagram 4 - Transmission Group Diagrama 4 - Grupo de transmisión Diag Part Description Qty. Loc. No. Req Transmission Group, Complete Gearbox Mtg Bracket Weldment Single Speed Gearbox Assy (Incl. Items 4 & 5) Transmission, Hydrostatic, Eaton (Incl. Item 5) Oil Reservoir w/ Cap and O-Ring Plug, Hex Hd #6 SAE Capscrew, Hex Hd M10 x 1.50 x 120mm Washer, Flat.375 Dia Locknut, Fiber M10 x Cable Bracket Washer, Flat M Capscrew, Hex Hd M8 x 1.25 x 30mm Locknut, Fiber M8 x Speed Control Arm Washer, Flat M Locknut, Fiber UNC Tensioning Bracket Nut, Hex Hd M10 x Capscrew, Hex Hd M10 x 1.50 x 50mm Key, Woodruff #404 (Flat Bottom) Transmission Pulley Assembly (Incl. Items 22 & 23) Transmission Pulley Screw, Set Soc Cup Pt UNC x Fan Attachment Plate Locknut, Fiber M5 x Plastic Fan Blade Capscrew, Hex Hd M5 x 0.8 x 16mm Lockwasher, Split.250 Dia (Hi-Collar) Capscrew, Hex Hd UNC x Capscrew, Hex Hd UNC x Shift Pivot Bracket Lockwasher, Split M Capscrew, Soc Hd M6 x 1.0 x 20mm Link Shifter Assembly, Standard Washer, Flat.500 SAE Shoulder Bolt, UNC x.500 Shank x Nut, Jam Hex Hd UNC Pin, Clevis.188 Dia x Washer, Flat #10 SAE Pin, Cotter.094 x Shifter Rod, Std Ball Joint, UNF RH Grommet, 7/16ID x 11/16 Dia Hole Knob, Black Lockwasher, Split.375 Dia Nut, Jam Hex Hd UNF RH 1 11

12 Diagram 5 - Accessory Idler Group Diagrama 5 - Grupo de accesorios de piñón Diag Part Description Qty. Loc. No. Req Washer, Flat M Lockwasher, Split.500 Dia Capscrew, Hex Hd M12 x 1.75 x 30mm Accessory Idler Group (Incl. Items 5-14) Washer, Flat M Nut, Hex Hd M10 x Pulley Assembly, M10 Bore Idler Arm, Deutz 2 Cyl Washer, Fiber 1.0 OD x 13/32 ID x 3/ Capscrew, Hex Hd M10 x 1.50 x 45mm Locknut, Fiber M10 x Capscrew, Hex Hd M10 x 1.50 x 65mm Spring Clip Spring, Extension.75 Dia x

13 Diagram 6 - Pointer & Sheave Guard Diagrama 6 - Salvaguarda de indicador y polea Diag Part Description Qty. Loc. No. Req Pointer Group (Complete) Front Pointer Assembly (Incl. Items 3-8) Front Pointer Weldment, FS3100D Front Pointer Rod Wheel, Front Pointer 5 Inch Dia Collar, Shaft.5 ID Nut, Low Hex M12 x 1.75 (7mm Tall) Capscrew, Hex Hd M12 x 1.75 x 25mm Capscrew, Hex Hd M12 x 1.75 x 65mm Locknut, Fiber M12 x Rear Pointer Weldment Lockwasher, Split M Capscrew, Hex Hd M10 x 1.50 x 50mm Flange Cover Capscrew, Hex Hd M10 x 1.50 x 100mm Sash Cord, 1/4 Dia x 10FT Clamp, Circle 3 13

14 Diagram 7 - Tie Down Kit - Optional Diagrama 7 - Juego de anclaje por debajo - Opcional Diag Part Description Qty. Loc. No. Req Tie Down Kit (Complete) 1 2 0A7667 Instruction Sheet, Tie Down Kit Tie Down Chain Loop Lockwasher, External Tooth, M Capscrew, Hex Hd M10 x 1.50 x 30mm Locknut, Fiber M10 x

15 Diagram 8 - Parking Brake Assembly, Optional Diagrama 8 - Ensamblaje de freno de estacionamiento, Opcional Diag Part Description Qty. Loc. No. Req Brake Assembly Group Brake Assembly Brake Disc Capscrew, Hex Hd M6 x 1.0 x 25mm Locknut, Fiber M6 x Bushing, 7/16ID x 11/16 Dia Hole Control Rod Pin, Cotter.094 x Knob, Black Washer, Flat M Lockwasher, Split.312 Dia Capscrew, Hex Hd M8 x 1.25 x 20mm 2 15

16 Diagram 9 - Water Piping & Switch Group Diagrama 9 - Grupo de tuberías de agua e interruptores Diag Part Description Qty. Loc. No. Req Water Piping & Switch Group (Complete) Nipple, Pipe 1/2 NPT x Elbow, Street, 90 degree x 1/2 NPT Hose Swivel Assembly Tee, Female, 1/2 NPT, Galvanized Pipe Nipple, 1/2 NPT x Pressure Switch, N.O Ball Valve, 1/2 NPT Capscrew, Hex Hd M10 x 1.50 x 25mm 2 16

17 Diagram 10 - Attachment Group Diagrama 10 - Grupo de acoplamiento Diag Part Description Qty. Loc. No. Req Attachment Group (Complete) Transmission Guard Assy Capscrew, Flange Hd M8 x 1.25 x 30mm (F-Thread) Locknut, Fiber M8 x Water Hose Assembly Clamp, Vinyl Coated 3/16 Hole x 5/16 ID 1 17

18 Diagram 11 - Electric Water Pump Group, Optional Diagrama 11 - Grupo de bomba de agua eléctrica, Opcional Diag Part Description Qty. Loc. No. Req Electric Water Pump Group (Complete) Water Pump Assembly (Incl. Items 3-10) Water Pump Modified Elbow, Street, 90 degrees x 3/4 NPT Hose Assy, Water Pump Inlet Hose Assy, Water Pump Outlet Water Pump Bracket Weldment Elbow, Street, 45 degrees x 3/4 NPT Close Nipple, 3/4 NPT Hose Adapter, Swivel (w/filter Washer) Washer, Flat M Capscrew, Hex Hd M6 x 1.0 x 20mm Locknut, Fiber M6 x Cable Tie Washer, Flat M Lockwasher, Split M Capscrew, Hex Hd M10 x 1.50 x 20mm 2 18

19 NOTES 19

20 Diagram 12 - Depth Indicator Group, Depth Stop Group Diagrama 12 - Grupo de indicador de profundidad, Grupo de tope deprofundidad 20

21 Diagram 12 - Depth Indicator Group, Depth Stop Group Diagrama 12 - Grupo de indicador de profundidad, Grupo de tope deprofundidad Diag Part Description Qty. Loc. No. Req Depth Indicator Group (Incl. Items 2-11) Mounting Bracket Bearing, Flange Grooved Bearing w/ Stud Nut, Keps.313UNC Knob, Decorative Washer, Flat.312 SAE Pulley, Depth Indicator Locknut, Fiber UNC Screw, Mach Pan Hd M5 x.80 x 12mm) Locknut, Fiber M5 x Depth Stop Group (Incl. Items 13-23) Depth Stop Assembly Pin, Clevis.500 Dia Pin, Cotter.094 x Washer, Bow.813 OD x.516 ID x.025 Thk Washer, Fiber Special Washer, Flat.500 Dia Handle, Depth Stop Pin, Roll.188 x Spring Cable w/ Ball, Depth Stop Clamp, Cable 6.5mm 1 21

22 Diagram 13 - Fuel Line Group, Fuel Tank Group Diagrama 13 - Grupo de tubería de combustible, Depósito de combustible 22

23 Diagram 13 - Fuel Line Group, Fuel Tank Group Diagrama 13 - Grupo de tubería de combustible, Depósito de combustible Diag Part Description Qty. Loc. No. Req Fuel Tank Group, Diesel (Incl. Items 2-11) Fuel Tank, Black Plastic - Diesel Gas Cap, w/ Gauge Elbow, Barb,.31 Hose x.25 NPT Grommet, Fuel Tank Fuel Tank Mounting Bar Washer, Flat M Lockwasher, External Tooth, M Capscrew, Hex Hd M8 x 1.25 x 20mm U-Nut, M8 x Capscrew, Hex Hd M8 x 1.25 x 30mm Fuel Line Group (Incl. Items 12-18) Filter, Diesel Fuel (In-Line) Hose Clamp, Worm Drive Hose, 5/16 ID Fuel Line Capscrew, Hex Hd M8 x 1.25 x 55mm Locknut, Fiber M8 x Filter, Diesel Fuel (Spin-On) 1 23

24 Diagram 14 - Hydraulic Pump Assembly Diagrama 14 - Ensamblaje de bomba hidráulica 24

25 Diagram 14 - Hydraulic Pump Assembly Diagrama 14 - Ensamblaje de bomba hidráulica Diag Part Description Qty. Loc. No. Req Hydraulic Pump Assy (Incl. Items 2-12) Pump, Hydraulic Lift Hydraulic Oil, Dexron Qt Lockwasher, Split.375 Dia Capscrew, Hex Hd UNC x Fitting, 90 degree Elbow, 3/8 SAE x 1/4 NPT Valve, Flow Control Fitting, 90 degree Elbow, 4 JIC x 1/4 NPT Wire Tie,.094 x 8.0 Lg Battery Cable, Negative Black 18 Inches Cable, Battery Positive, 12 Inches Rubber Boot, Battery Terminal Washer, Flat.375 Dia Lockwasher, Split.375 Dia Capscrew, Hex Hd UNC x

26 Diagram 15 - Cowl Electrical Group Diagrama 15 - Grupo eléctrico de cubierta de motor Diag Part No. Description Qty. Loc. Req Cowl Electrical Group (Complete) Cowl Wiring Harness, Diesel Fuse Block Screw, Mach Rd Hd #10-24UNC x Locknut, Fiber #10-24UNC Fuse, 10 Amp Fuse, 5 Amp Relay, NO/NC Screw, Hex Wash Hd Slf Tap #10-24UNC x.50 Type F Grommet, 3/4 ID x 1 7/16 Hole Size Clamp, Vinyl Coated 1/4 Hole x 5/8 ID Clamp, Vinyl Coated 3/8 Hole x 3/8 ID Wire Tie,.094 x 8.0 Lg Circuit Breaker, 30 Amp 1 26

27 Diagram 16 - Battery Bracket Group, Battery Group Diagrama 16 - Grupo de ménsula de batería, Grupo de batería Diag Part Description Qty. Loc. No. Req Battery Bracket Group (Incl. Items 2-5) Bracket, Battery Washer, Flat M Capscrew, Hex Hd M10 x 1.50 x 20mm Locknut, Fiber M10 x Battery Group, Wet (Metric), Diesel (Incl. Items 7-17) Bar, Battery Holddown Bolt, Battery Holddown Locknut, Fiber M8 x Tape, Protective Split Loom, 1/2 Inch 42 In Capscrew, Hex Hd M6 x 1.0 x 20mm Washer, Flat M Locknut, Fiber M6 x Battery, 12V Wet Battery Cable, Positive 48 Inch Battery Cable, Negative Black (40 Inch) 1 27

28 Diagram 17 - Speed Control Lever Group, Handle & Switch Group Diagrama 17 - Grupo de palanca de control de velocidad, Grupo de mango e interruptor 28

29 Diagram 17 - Speed Control Lever Group, Handle & Switch Group Diagrama 17 - Grupo de palanca de control de velocidad, Grupo de mango e interruptor Diag Part No. Description Qty. Loc. Req Cowl Group, Diesel (Complete) Speed Control Lever Group (Incl. Items 3-24) Speed Control Lever Assembly (Incl. Items 4-21) Speed Control/Shift Frame Bushing, Brass Washer, Friction.656 ID Arm, Shifter Pivot Washer, Flat.500 Dia Spring Washer, Bellville Disc Locknut, Fiber M12 x Shift Pivot Point Iglide Bushing Capscrew, Hex Hd UNC Locknut, Fiber UNC Rod End, #10-32UNF Locknut, Fiber #10-32UNF Bracket, Neutral Safety Switch Capscrew, Hex Hd M6 x 1.0 x 16mm Locknut, Fiber M6 x Switch Neutral Safety Cable, Push-Pull Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 16mm Locknut, Fiber #10-32UNF Handle & Switch Group, (Incl. Items 26-33) Handle & Switch Assembly (Incl. Items 27-31) Toggle Switch Assembly (Incl. Items 28-31) Switch, Toggle Bracket, Mounting Plate, Cover Terminal, Solder Capscrew, Hex Hd M6 x 1.0 x 35mm Locknut, Fiber M6 x

30 Diagram 18 - Control Panels: Engine & Pump, Instrument Panel Assembly Diagrama 18 - Paneles de control: Máquina y bomba, Conjunto de panel de instrumentos 30

31 Diagram 18 - Control Panels: Engine & Pump, Instrument Panel Assembly Diagrama 18 - Paneles de control: Máquina y bomba, Conjunto de panel de instrumentos Diag Part No. Description Qty. Loc. Req Control Panels: Engine & Pump (Incl. Items 2-8) Panel Assembly, Engine Control - Diesel (Incl. Items 3-5) Panel, Dash Cover Decal, Throttle - Diesel Cable, Throttle Screw, Hex Wash Hd Slf Tap #10-24UNC x.375 Type D Pump Cover Plate Switch, Mushroom Stop Instrument Panel Assy, Diesel (Incl. Items 10-18) Instrument Panel, Diesel Decal, Instrument Panel Gauge, DC Voltmeter Calibrated Gauge, Tach/Hourmeter - Deutz 2 Cyl Gauge, Oil Pressure Switch, Ignition Key (Incl. Item 16) Key, Ignition (Set of 2) Switch, Rocker SPST Connector, Gauge Screw, Hex Wash Hd Slf Tap #10-24UNC x.375 Type D 6 31

32 Diagram 19 - Hardware Mounting & Cowl Weldment Diagrama 19 - Tornillería de montaje y soldadura de cubierta de motor Diag Part No. Description Qty. Loc. Req Cowl Weldment Lockwasher, Split.500 Dia Capscrew, Hex Hd M12 x 1.75 x 25mm 6 32

33 Diagram 20 - Belt Guard Assembly Diagrama 20 - Ensamblaje de salvaguarda de banda Diag Part No. Description Qty. Loc. Req Belt Guard Assembly (Incl. Items 2-8) Belt Guard Weldment Washer, Flat M Lockwasher, Split M Capscrew, Hex Hd M10 x 1.50 x 20mm Washer, Flat M Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 20mm Bladeshaft Wrench Group (Incl. Item 10) Wrench, Bladeshaft 1 33

34 Diagram 21 - Handle Group Diagrama 21 - Grupo de mango Diag Part No. Description Qty. Loc. Req Handle Group (Complete) Handle Assembly (Incl. Items 3 & 4) Handle Bar Grip, Handle Knob, 1.25 x 3/8-16UNC-2A 2 34

35 Diagram 22 - Air Cleaner Hose Group, Air Cleaner Group Diagrama 22 - Grupo de manguera Air Cleaner, Grupo Air Cleaner Diag Part No. Description Qty. Loc. Req Air Cleaner Hose Group (Incl. Items 2-4) Hose, Air Intake Hose Clamp, Worm Drive SAE Hose Clamp, Worm Drive SAE Air Cleaner Group (Incl. Items 6-23) Air Cleaner Assembly (Incl. Items 7-9) Primary Element Valve, Air Cleaner Elbow, Air Cleaner Outlet Band Assembly, Air Cleaner Mount Capscrew, Hex Hd M8 x 1.25 x 20mm Locknut, Fiber M8 x Adaptor, Restriction Indicator Air Restriction Indicator Precleaner, Impeller Type (Incl. Item 16) Hose Clamp, Worm Drive SAE Air Cleaner Mount Washer, Flat M Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 35mm Washer, Flat M Lockwasher, Split.312 Dia Capscrew, Hex Hd M8 x 1.25 x 16mm Safety Element (Not Shown - Incl. With Air Cleaner Group) 1 35

36 Diagram 23 - Engine Group, Engine Group Diagrama 23 - Grupo de máquina 36

37 Diagram 23 - Engine Group, Engine Group Diagrama 23 - Grupo de máquina Diag Part Description Qty. Loc. No. Req Engine Group, Diesel (Less Air Cleaner & Misc. Parts) (Complete) Engine Modified Deutz F2L Front Engine Mount Rear Engine Mount Bracket, LH Engine Foot Right Engine Foot Bracket Flywheel-Narrow Ring Gear Assy Heat Shield Bracket, Heat Shield Bracket, Hose Support Elbow, Exhaust Outlet Fitting, Elbow, Metric-JIC Belt Tensioner Assy Washer, Flat.562 Dia Lockwasher, Split M Capscrew, Hex Hd M14 x 2.0 x 30mm Washer, Flat M Lockwasher, Split.500 Dia Capscrew, Hex Hd M12 x 1.75 x 30mm Washer, Flat 1.75 OD x.594 ID Rubber Boot, Battery Terminal Washer, Flat M Lockwasher, Split M Lockwasher, Split.312 Dia Capscrew, Hex Hd M6 x 1.0 x 16mm Capscrew, Hex Hd M8 x 1.25 x 16mm Washer, Flat M Capscrew, Hex Hd M8 x 1.25 x 25mm Locknut, Fiber M8 x Capscrew, Hex Hd M12 x 1.75 x 100mm Nut, Hex Hd M12 x Washer, Flat M Lockwasher, Split M Capscrew, Hex Hd M10 x 1.50 x 30mm Capscrew, Soc Hd M10 x 1.00 x 25mm (12.9) Capscrew, Hex Hd M10 x 1.50 x 16mm Hose, Oil Drain Clamp, Vinyl Coated 3/8 Hole x 1.00 ID Capscrew, Hex Hd M6 x 1.0 x 25mm Valve, Oil Drain 1 37

38 Diagram 24 - Engine Throttle Control Hardware Diagrama 24 - Dispositivos de control de acelerador de máquina Diag Part No. Description Qty. Loc. Req Engine Throttle Control Hardware (Complete) Bracket, Throttle Lever Pivot Pin Assembly (Incl. Items 4 & 5) Pivot Pin for Speed Control Screw, Set Soc Cup Pt #10-24UNC x Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 16mm Bracket, Throttle Capscrew, Hex Hd M5 x 0.8 x 20mm Locknut, Fiber M5 x Clamp, Vinyl Coated 3/16 Hole x 5/16 ID Capscrew, Hex Hd M5 x 0.8 x 16mm Deutz Engine Alternator V-Belt (Not Shown) Oil Filter, Deutz (Not Shown) Valve/Cover Gasket, Deutz (Not Shown) Oil Cap, Deutz (Not Shown) 1 38

39 Diagram 25 - Belts & Pulleys, 18" Diagrama 25 - Bandas y poleas, 18" Diag Part No. Description Qty. Loc. Req Belts & Pulleys, 18 Inch (Complete) Pulley, Flange 4.12 x 7 Gr Lockwasher, Split M Capscrew, Hex Hd M24 x 2.0 x 80mm Pin, Dowel.375 x V-Belt, 3VX450 (Drive Accessory) V-Belt, 3VX450 (3 bands set of 2) 1 39

40 Diagram 26 - Belts & Pulleys Assembly, 26"/30" Diagrama 26 - Ensamblaje de bandas y poleas, 26"/30" Diag Part No. Description Qty. Loc. Req Belts & Pulleys, 26/30 Inch (Complete) Pulley, Flange 2.8 x 7 Gr Capscrew, Soc Hd M10 x 1.00 x 25mm (12.9) V-Belt, 3VX430 (Accessory Drive) V-Belt, 3VX430 (3 bands set of 2) 1 40

41 Diagram 27 - Bladeshaft Assembly Diagrama 27 - Ensamblaje de eje de hoja Diag Part No. Description Qty. Loc. Req Bladeshaft Assembly (Complete) Bearing, Ball, Pillow Block ID Lockwasher, Split.500 Dia Capscrew, Hex Hd UNC x Grease Zerk Ext. Tube Grease Fitting, 1/4-28UNF Fitting, Grease 1/4-28UNF x 90 degrees Bladeshaft Key, Square (Round Ends).25 x Key, Square (Round Ends) Blade Collar, Inner 5 Inch Blade Flange Assy, Outer 5 Inch (Incl. Items 13 & 14) Blade Flange, Outer 5 Inch Pin, Dowel.375 x Nut, Hex Hd 1-14UNF LH Thread Protector Sleeve Nut, Hex Hd 1-14UNF RH Pulley Assy, 6GR3V4.75 (w/ss) (Incl. Items 19 & 20) Pulley, 3V 6 Gr x 4.75 O.D Screw, Set Soc Cup Pt UNC

42 Diagram 28 - Lift Bail Group Diagrama 28 - Grupo de estribo elevador Diag Part No. Description Qty. Loc. Req Lift Bail Group (Complete) Lift bail Weldment Lift Bail Brace Washer, Flat.500 Dia Lockwasher, Split M Capscrew, Hex Hd M12 x 1.75 x 25mm Locknut, Fiber M12 x Washer, Flat M Capscrew, Hex Hd M12 x 1.75 x 40mm 7 42

43 Diagram 29 - Muffler Heat Shield Kit - Optional Diagrama 29 - Juego de protector térmico del silenciador del tubo de escape - Opcional Diag Part No. Description Qty. Loc. Req Muffler Heat Shield Kit Muffler Guard, 2 Cyl Deutz Capscrew, Hex Hd M6 x 1.0 x 16mm Washer, Flat M Locknut, Fiber M6 x

44 Diagram 30 - Attach Group, Slip-On Diagrama 30 - Grupo de acoplamiento, deslizable Diag Part No. Description Qty. Loc. Req Attach Group, Slip-On (Complete) Spade, RH Slip-On Guard Scapscrew, Flat Hd Soc M10 x 1.25 x 25mm Locknut, Fiber M10 x Spade, LH Slip-On Guard Capscrew, Hex Hd M16 x 2.0 x 110mm Lockwasher, Split.625 Dia Washer, Flat.625 SAE 1 44

45 Diagram 31 - Blade Guard Assembly - 18" Slip-On, 2 Wide Diagrama 31 - Ensamblaje de salvaguarda de hoja - 18" Deslizable, 2 Wide Diag Part No. Description Qty. Loc. Req Blade Guard Assembly, 18" (450mm) (Slip-On) (Complete) Rear Blade Guard Weldment, 18 Inch Manifold, Assembly Tube, Water, 18 Inch Blade Adapter, 3/8 NPT x Male Garden Hose Plug, Soc Hd 1/8 NPT Brass Clamp, Water Tube Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 45mm Capscrew, Slot Flat Hd M6 x 1.0 x 16mm Locknut, Fiber M6 x Splash Guard Washer, Flat M Capscrew, Hex Hd M6 x 1.0 x 20mm Hinge, Machined, 18 Inch Front Blade Guard Weldment, 18 Inch Decal, Warning (Bld Grd Size) Decal, Blade Direction (Small) Washer, Flat M Lockwasher, External Tooth, M Capscrew, Hex Hd M8 x 1.25 x 20mm Cover, Blade Shaft Capscrew, Hex Hd M12 x 1.75 x 25mm Locknut, Fiber M12 x Wing Bolt, M6 x 1.0 x 16mm Latch, Blade Guard, Slip-On Bolt, Latch Pivot M8 x Nut, Hex Hd M5 x Capscrew, Hex Hd M5 x 0.8 x 20mm Spring,.36 Inch OD x.050 Dia Wire Spring,.518 Inch Dia 1 45

46 Diagram 31a - Blade Guard Assembly - 18" (450mm) Slip-On, 3 Wide Diagrama 31a - Conjunto de protector de hoja - 18 pulg (450 mm) de montaje deslizante, 3 Wide 46

47 Diagram 31a - Blade Guard Assembly - 18" (450mm) Slip-On, 3 Wide Diagrama 31a - Conjunto de protector de hoja - 18 pulg (450 mm) de montaje deslizante, 3 Wide DIAG. PART QTY. DESCRIPTION LOC. NO. REQ Blade Guard Assembly, 18" (450mm) (Slip On) (Complete) Rear Blade Guard Weldment, - 18 Inch Manifold, Assembly Tube, Water, 18 Inch Blade Adapter, 3/8 NPT x Male Garden Hose Plug, Soc Hd 1/8 NPT Brass Clamp, Water Tube Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 45mm Capscrew, Slot Flat Hd M6 x 1.0 x 16mm Locknut, Fiber M6 x Splash Guard Washer, Flat M Capscrew, Hex Hd M6 x 1.0 x 20mm Hinge, Machined (18 Inch) Blade Guard, Front - 18 Inch, w/ Decals (Incl. Items 17-19) Front Blade Guard Weldment, 18 Inch Decal, Warning (Bld Grd Size) Decal, Blade Direction (Small) Washer, Flat M Lockwasher, External Tooth, M Capscrew, Hex Hd M8 x 1.25 x 20mm Cover, Blade Shaft Capscrew, Hex Hd M12 x 1.75 x 25mm Locknut, Fiber M12 x Wing Bolt, M6 x 1.0 x 16 mm Latch, Blade Guard, Slip-on Bolt, Latch Pivot M8 x Nut, Hex Hd M5 x Capscrew, Hex Hd M5 x 0.8 x 20mm Spring,.36 Inch OD x.050 Dia Wire Spring,.518 Inch Dia 1 47

48 Diagram 32 - Blade Guard Assembly - 26" Slip-On Diagrama 32 - Ensamblaje de salvaguarda de hoja - 26" Deslizable Diag Part No. Description Qty. Loc. Req Blade Guard Assembly, 26" (600mm) (Slip-On) (Complete) Blade Guard Weldment, Rear 26 Inch Manifold, Assembly Adapter, 3/8 NPT x Male Garden Hose Tube, Water, 26 Inch Blade Clamp, Water Tube Latch, Blade Guard, Slip-On Bolt, Latch Pivot M8 x Splash Guard Washer, Flat M Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 16mm Capscrew, Slot Flat Hd M6 x 1.0 x 16mm Locknut, Fiber M6 x Nut, Hex Hd M5 x Capscrew, Hex Hd M5 x 0.8 x 20mm Spring,.36 Inch OD x.050 Dia Wire Capscrew, Hex Hd M6 x 1.0 x 20mm Hinge, Machined (26 Inch) Blade Guard, Front - 26 Inch w/decals (Incl. Items 21-23) Front Blade Guard Weldment, 26 Inch S.O Decal, Warning (Bld Grd Size) Decal, Blade Direction (Small) Washer, Flat M Lockwasher, External Tooth M Capscrew, Hex Hd M8 x 1.25 x 20mm Spring,.518 Inch Dia Cover, Blade Shaft Capscrew, Hex Hd M12 x 1.75 x 25mm Locknut, Fiber M12 x Wing Bolt, M6 x 1.0 x 16mm 1 48

49 Diagram 33 - Blade Guard Assembly - 30" Slip-On Diagrama 33 - Ensamblaje de salvaguarda de hoja - 30" Deslizable Diag Part No. Description Qty. Loc. Req Blade Guard Assembly, 30" (750mm) (Slip-On) (Complete) Rear Blade Guard Weldment, 30 Inch (Slip-On) Hinge, Machined 30 Inch (Slip-On) Washer, Flat M Lockwasher, External Tooth, M Capscrew, Hex Hd M8 x 1.25 x 20mm Front Blade Guard, w/decals (Incl. Items 8-10) Front Blade Guard Weldment, 30 nch (Slip-On) Decal, Blade Direction (Small) Decal, Warning (Bld Grd Size) Locknut, Fiber M6 x Capscrew, Hex Hd M6 x 1.0 x 20mm Spring,.518 Inch Dia Locknut, Fiber M12 x Capscrew, Hex Hd M12 x 1.75 x 25mm Cover, Blade Shaft Wing Bolt, M6 x 1.0 x 16mm Splash Guard Washer, Flat M Capscrew, Slot Flat Hd M6 x 1.0 x 16mm Clamp, Water Tube Manifold, Assembly Water Tube Assy, 30 Inch (Slip-On) Lockwasher, Split M Capscrew, Hex Hd M6 x 1.0 x 45mm Adapter, 3/8 NPT x Male Garden Hose Plug, Soc Hd 1.8 NPT Brass Nut, Hex Hd M5 x Capscrew, Hex Hd M5 x 0.8 x 20mm Bolt, Latch Pivot M8 x Latch, Blade Guard, Slip-On Spring,.36 Inch OD x.050 Dia Wire 2 49

50 DIMAS North America Corporate Office West 119th Street Olathe, Kansas Phone: DIMAS South Carolina Phone: Fax: DIMAS California Phone: Fax: DIMAS Canada Phone: Fax: From the Electrolux Group. The world s No.1 choice.