SPC-50S WASTE REDUCTION SYSTEM
|
|
|
- Polly Mills
- 6 years ago
- Views:
Transcription
1 Project: Item No. Quantity SPC-50S The Somat SPC-50S Waste Reduction System processes up to 900 lbs. of food service waste per hour providing an economic and efficient answer to cutting the high and ever increasing costs associated with waste handling. Somat Pulping Systems are engineered to reduce foodservice waste volume by an 8 to 1 reduction (up to 85%.) Compostable waste enters the pulping tank via the feed tray or scrapping trough where it mixes with water and is ground into a slurry. The slurry is fed to the Hydra-Extractor for de-watering and the result is a semi-dry pulp discharged into a haul-away container or a Somat Dehydrator for additional reduction. The extracted water is recovered and returned to the pulping tank for re-use by the tray or trough. VOLTAGE OPTIONS 208/60/3 230/60/3 460/60/3 International options available, consult factory STANDARD FEATURES Hinged lid pulper with limit switch Hydra-Extractor 3 HP recirculating pump Valve package Chemical additive pump Som-A-Trol control panel Shown with optional feed tray TECHNICAL SPECIFICATIONS Pulper: 23" diameter, 39" high max (legs fully extended) Polished stainless steel tank Hinged lid with limit switch 3 8" stainless slurry chamber 5 HP TEFC direct drive motor Internal collection box Hypoint style cutting mechanism, featuring: Stainless steel impeller Two hardened corrosion resistant alloy rotating blades Three carbide stationary blades Hydra-Extractor Welded stainless steel construction Stainless steel adjustable legs 2 HP TEFC drive motor 20:1 gear reducer 3HP TEFC recirculating pump Chemical pump 6" stainless steel auger with nylon brush edge Reinforced stainless steel screens Automatic shutdown timer Automatic rinse system Discharge chute with safety switch Valve Package: All valves required for operation including fresh water, return and drain lines. Som-A-Trol Electrical Control Panel: UL approved stainless steel NEMA 4 panel with all components pre-wired to internal terminal strip. Push Button control station on panel door (remote control station optional). Panel to be wall mounted with field connection to pulper mounted junction box. OPTIONS Water flushed feed tray Trough feed connection Feed tray cover Prison package Under dish table unit Vibration pads Remote push button station Grabber magnets The Power to Transform WASTEFUL to SUSTAINABLE SO60424 (06/17) Page 1 of 6
2 HIGH TANK WITH TRAY FEED E8 E3 P4 E4 P5 20" 23 1/4" P3 E6 E2 E1 - Pulper Drive Motor E2 - Extractor Drive Motor E3 - Return Pump Motor E4 - Fresh Water Solenoid E5 - Pulper Limit Switch E6 - Chute Limit Switch E7 - Chemical Additive Pump E8 - Junction Enclosure E9 - Autorinse Solenoid P1 - Drain Valve Outlet (MOV) P2 - Auto-rinse Inlet P3 - Return Water Outlet P4 - Fresh Water Inlet P5 - Overflow Outlet P6 - Tray Flush (see next page) E7 E5 10 1/4" 24 7/8" P6 64 5/8" 16 3/4" 57 3/8" 37 1/4" 38 1/8" 25 3/4" 35 3/4" P2 E9 9 3/4" P1 45 1/2" E1 SPECIFICATIONS Total Height Tank Height Length Width Equipment Operating Volume 65" (1,651 mm) 37.25" (946 mm) " (2,213 mm) 23.25" (591 mm) 725 lbs. (329 kg) 890 lbs. (404 kg) 1,000 lbs. (454 kg) 167 cu. ft. Page 2 of 6 SO60424 (06/17)
3 HIGH TANK WITH FEED E8 E3 P4 E4 P5 6" 23 1/4" 10 1/2" P3 12 5/8" E6 E2 E1 - Pulper Drive Motor E2 - Extractor Drive Motor E3 - Return Pump Motor E4 - Fresh Water Solenoid E5 - Pulper Limit Switch E6 - Chute Limit Switch E7 - Chemical Additive Pump E8 - Junction Enclosure E9 - Autorinse Solenoid P1 - Drain Valve Outlet (MOV) P2 - Auto-rinse Inlet P3 - Return Water Outlet P4 - Fresh Water Inlet P5 - Overflow Outlet P6 - Trough Flush (see page 4) E7 E5 10 1/4" 1" 5 3/4" 64 5/8" 7 1/4" 57 3/8" 38 1/8" 16 3/4" 24 1/4" 37 1/4" P2 E9 9 3/4" P1 45 1/2" E1 SPECIFICATIONS Total Height Tank Height Length Width Equipment Operating Volume 65" (1,651 mm) 37.25" (946 mm) 63.25" (1,607 mm) 23.25" (591 mm) 725 lbs. (329 kg) 890 lbs. (404 kg) 1,000 lbs. (454 kg) 167 cu. ft. SO60424 (06/17) Page 3 of 6
4 10 1/ /32" Ø HOLE (11 PLCS) 13 1/ /4" Ø HOLE (13 PLCS) 7 1/4 6 1/2 5 3/4 7 1/4 6 1/2 5 3/4 25 1/2 AFF /16 = 9 3/4 25 1/2 AFF /8 = 1 9" FLANGE DETAIL 12" FLANGE DETAIL REMOVABLE LID (NF) TABLE TOP (NF) FLUSH END NOZZLE (F) FLOW 5-3/4 PULPER FLANGE CONNECTION (NF) (SEE DETAIL) B GRABBER MAGNET (F) SLOPE THE SLOPE IS CONSTANT POINT A TO B 7 1-1/2" MALE NPT RETURN WATER CONNECTION (F) "P6" 3 A CUT 2" DIA. HOLE AND SEAL W/SILICONE 2 PULPER DETAIL DETAIL 1 1/2" (F) ~ FROM "P3" 1-1/2" NOZZLE (F) ALL ITEMS IN THIS DETAIL NOT FURNISHED UNLESS NOTED. Page 4 of 6 SO60424 (06/17)
5 LOCATION SHOWN AT 0 DEGREES, CENTER POSITION TANG. LEFT TANG. RIGHT OPTIONAL POSITIONS CAN BE ROTATED ON THE CENTER POINT OF THE TANK BY 15 DEGREE INCREMENTS, ACTUAL ENTRY POINTS TO THE TANK WILL DEPEND ON ORIENTATION, LEFT, RIGHT OR CENTER POSITION, CAN NOT COME IN CONTACT WITH EXTRACTOR AREA (SHADED PORTION). TABLE TOP OPTIONAL UDT PULPER TABLE TOP SO60424 (06/17) Page 5 of 6
6 E SPC-50S CUSTOMER POWER SUPPLY 208V-3Ø-60Hz-35AMPS 460V-3Ø-60Hz-20AMPS LOCATION SERIAL SOMAT EMERGENCY STOP M E R G E N C Y S T O P CHUTE OVERFLOW OVERFLOW START BUTTON/LIGHT RDY START STOP BUTTON/LIGHT TIMED STOP BUTTON OVER STOP TIMED STOP SPC50AS SOM-A-TROL R (16) CONDUCTORS FOR REMOTE PUSH BUTTON AND MACHINE CONTROLS, 18AWG OR BETTER CONDUCTORS FOR MACHINE MOTORS, INCLUDES GROUND (8) WIRES INCL. GRD., 14AWG OPTIONAL REMOTED PUSH BUTTON STATION START BUTTON/LIGHT RDY START CONDUIT OR CABLING REQUIRED TO HOUSE/PROTECT CONTROL/MOTOR WIRING ACCORDING TO JOBSITE REQUIREMENTS STOP BUTTON/LIGHT TIMED STOP BUTTON OVER STOP TIMED STOP JUNCTION BOX LOCATED ON PULPER CONDUIT OR CABLING REQUIRED TO HOUSE/PROTECT PUSH BUTTON WIRING ACCORDING TO JOBSITE REQUIREMENTS OTHER UTILITY REQUIREMENTS Fresh Water Drain psig, 1 2" NPT (approximate usage gph) 3" minimum floor sink, 4" recommended (with stainless steel removable basket recommended) Page 6 of 6 SO60424 (06/17)
SPECIFICATIONS DOUGLAS MODEL LD-20 POT, PAN, AND UTENSIL WASHER
B05D PAN WASHER B05D PAN WASHER xxxxxx Effective: March 1, 2005 SPECIFICATIONS DOUGLAS MODEL LD-20 POT, PAN, AND UTENSIL WASHER CABINET 50 wide x 36 deep x 73 high Clearance Height: 100-3/4 (103-1/2 with
MODEL CMA-180UC PARTS MANUAL Rev 1.19
MODEL CMA-180UC PARTS MANUAL Rev 1.19 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS
MODEL CMA-180UC PARTS MANUAL Rev 1.19A
MODEL CMA-180UC PARTS MANUAL Rev 1.19A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
MODEL CMA-181GW PARTS MANUAL Rev 1.00B
MODEL CMA-181GW PARTS MANUAL Rev 1.00B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS
www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
www.cmadishmachines.com Table of Contents CMA-66 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
MODEL CMA-44 PARTS MANUAL Rev 2.13
MODEL CMA-44 PARTS MANUAL Rev 2.13 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4
Tri-Clover SP328 Centrifugal Pump
Tri-Clover SP328 Centrifugal Pump Mfg: Tri Clover Stock No. OIP025. Model: SP328ME-00-S Serial No. E3152 Tri-Clover SP328 Centrifugal Pump. Model SP328ME-00-S. S/N E3151. Capacity: up to 380 gpm. Impeller:
Rev.2.05 www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly... 5
MODEL GLC PARTS MANUAL REV.1.02A
Owner s Manual Keep with machine for reference MODEL GLC PARTS MANUAL REV.1.02A CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-8 95-2 141 MODEL GL-C Parts MANUAL
Rev.2.06A www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly (3
PARTS MANUAL. American Dish Service ADS CONVERTIBLE DISHWASHER MODELS: AF3DS / AFC3DS. EFFECTIVE: April, 2014
EFFECTIVE: April, 2014 ADS CONVERTIBLE DISHWASHER MODELS: AF3DS / AFC3DS PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 026-0090 / 027-0090 Models: 2 026-0090 / 027-0090 Models:
For more Parts Information:
For more Parts Information: https://manitowocfsg.sysonline.com/default.aspx TABLE OF CONTENTS Manitowoc Foodservice [Updated: Sep. 30, 2013] Manitowoc - Ice & Related Parts Catalog Ice Machine S Series
CENTRAL SLURRY SYSTEMS Model 915
CENTRAL SLURRY SYSTEMS Model 915 Installation and Operating Instructions 08/02/18 PRACTICAL SYSTEMS, INC. 11617 Prospect Road Odessa, FL 33556 (800) 237-8154 Fax (800) 330-3800 (727) 376-7900 Fax (727)
wipes ready technology
MUFFIN MONSTER 1K series Muffin Monster The 1K Series Muffin Monster is a compact grinder, tough on solids in sludge and sewage applications. It fits into areas with limited space requirements while still
MC2500. Installation and Operation Manual
MC2500 Installation and Operation Manual Important: This manual contains specific cautionary statements relative to worker safety. Read this manual thoroughly and follow as directed. It is impossible to
THE IDEAL SOLUTION WARE WASH. Sales Telephone: Sales Fax:
THE IDEAL SOLUTION WARE WASH Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk Ware Wash DISHWASH TABLING Dishwash Inlet Tabling grade 304 throughout Worktop 1.5mm
02/19/2018. Project: VB Southwest Elem
02/19/2018 Project: VB 0197.3 Southwest Elem From: To: Table of Contents MILK COOLER BEVERAGE AIR SM49N S (ITEM 01) 1 SERVING COUNTER, HOT FOOD, ELECTRIC DUKE MANUFACTURING E305 25SS (ITEM 2 02) SNEEZE
PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L EFFECTIVE: MAY, 2011
EFFECTIVE: MAY, 2011 ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 213-0066 L-R / 214-0066 R-L ADC-66 Conveyor Dishwasher 2
MEYER MATE 9.0 CU FT. SPREADER
MEYER MATE 9.0 CU FT. SPREADER General Specifications Overall Height: 41.25" Overall Width: 49.5" Overall Depth: 32" Weight Empty: 140 lbs. Spreading Width: Minimum 3 Maximum 30 Spreading Material: Dry
DPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
TotalPac 3 Deluge, Electric release Remote controlled system
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a deluge system trim totally preassembled, pre-wired and factory tested. All electrical and
For more Parts Information:
For more Parts Information: https://manitowocfsg.sysonline.com/default.aspx TABLE OF CONTENTS Manitowoc Foodservice [Updated: Apr. 23, 2015] Manitowoc - Ice & Related Parts Catalog Ice Machine Indigo Series
Inter-Sep Rotary Drum Strainer (Internally Fed Liquid Solids Separator Instruction, Operating & Maintenance Manual
Design Engineering Manufacturing Sales Installations Food Industrial Process Sanitation Environmental Control Representatives Throughout U.S. Canada & South America Instruction, Operating & Maintenance
SECTION GRIT REMOVAL
SECTION 11320 GRIT REMOVAL PART 1 GENERAL 1.01 SCOPE OF WORK The grit removal system shall be complete with the following equipment: concrete chamber, grit storage hopper, drive unit, drive tube with impeller,
SECTION H3 TRAYMASTER SERIES DEAERATORS
SECTION H3 TRAYMASTER SERIES DEAERATORS SAMPLE SPECIFICATIONS PART 1 GENERAL... H3-12 1.1 Packaged Deaerator Specification... H3-12 PART 2 PRODUCTS... H3-12 2.1 Deaerator... H3-12 2.2 Deaerator Vessel...
M O D E L S EST- FL PARTS MANUAL Rev 1.00A
M O D E L S EST- FL PARTS MANUAL Rev 1.00A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com TABLE
MODEL "454L" MOBILE HIGH PRODUCTION CENTRAL MIX PLANT
MODEL "454L" MOBILE HIGH PRODUCTION CENTRAL MIX PLANT AGGREGATE STORAGE AND BATCHING MODULE AGGREGATE STORAGE BIN 60 CUBIC YARD X THREE (3) COMPARTMENT AGGREGATE BIN EQUAL IN-LINE COMPARTMENTS SIX (6)
02. Purpose : Heating / Drying / Calcination etc. 04. Feeder System : 0.5 H.P. Motorized Screw Feeder with VFD.
I EQUIPMENT : GAS/OIL FIRED INDIRECTLY HEATED ROTARY REACTOR. Technical Data : 01. Type : Indirectly heated. 02. Purpose : Heating / Drying / Calcination etc. 03. Feed Size : 0 25mm. 04. Feeder System
WOODWORKING MACHINERY
PRICE LIST NO. 56 Applying to the Complete Line of WOODWORKING MACHINERY SUPERSEDING AND CANCELLING ALL PREVIOUS ISSUES SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE AUGUST 1, 2005 Over 84 Years of Continuous
CENTRAL SLURRY SYSTEMS Model 911
CENTRAL SLURRY SYSTEMS Model 911 Installation and Operating Instructions Revised 6/04/08 PRACTICAL SYSTEMS, INC. 11617 Prospect Road Odessa, FL 33556 (800) 237-8154 Fax (800) 330-3800 (727) 376-7900 Fax
Mobrey MSM400 Ultrasonic sludge density measurement system
Technical specification sheet IP257 October 2008 Mobrey MSM400 Ultrasonic sludge density measurement system Level Features Measuring range up to 50% solids Simple keypad operation HMI menu based programming
Hobart Model AM Dishwasher
CONDUIT (R.H. CONTROLS) PL-18580 NO. NAME OF PART AMT. 1 P-77657-38 Conduit - 3/4" x 32" (Waterproof) 1 2 FE-8-25 Connector-90 0 Sealtite" (3/4" Male Thd. x 3/4" Flex.Cnd.) 1 3 FE-8-11 3/4"Gasket Any 1
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type l
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type 250 300l Execution - total volume mixer bowl approx. 380 l, nominal volume approx. 300 l - stationary design, with four height adjustable
Priming Systems Installation Instructions
Priming Systems Installation Instructions System Components: Single Priming Pump: Single VAP Valve Systems: Control Panel Activated... 2 Auto Prime (Pressure Switch) Activated... 3 Multiple VAP Valve Systems...
Washer-Extractor. SP Series Spare Parts Manual. B&C Technologies Panama City, FL (850) (850) FAX
SP Series Spare Parts Manual Revision 3.95 27-May-2014 B&C Technologies Panama City, FL (850) 249-2222 (850) 249-2226 FAX www.bandctech.com Table of Contents Ordering Information Name Plate Location Model
ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
4395 Iroquois Ave Erie, PA Fax: Page 1 of 5
Erie Technical Systems Inc. 4395 Iroquois Ave Erie, PA 16511 www.bulkfilling.com info@erietechnicalsystems.com Phone: 814-899-2103 Fax: 814-899-2146 Page 1 of 5 A. FlexMAX Overview: 3 a. Hoppers with FastFLO
SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS
SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS GRpumps.com S U P E R T S P E C I F I C A T I O N S SIZES MATERIALS OF CONSTRUCTION MAX. CAPACITY MAX. HEAD MAX. SOLIDS 3", 4", 6", 8", 10" (75 mm, 100 mm, 150
SIMPLEX BIG 2B PARTS WASHERS WITH ROTARY BASKET, PLC AND TOUCHSCREEN EQUIPMENT SIMPLEX BIG 2B
SIMPLEX BIG 2B PARTS WASHERS WITH ROTARY BASKET, PLC AND TOUCHSCREEN Simplex Big is a system ideal for the automatic washing of medium and large size mechanical parts. The washing is carried out by the
NOTE: All dimensions shown are rounded up to the nearest inch to get even dimensions. TM.400NMTVP doc Page 1 of 5
NOTE: All dimensions shown are rounded up to the nearest inch to get even dimensions. TM.400NMTVP-2.04122017.doc4122017 Page 1 of 5 CAPACITY Dry Weight: 400-450 Lbs [181-204 kg] TOP-SIDE LOADER WASHER/EXTRACTOR
A (Refer to the following specifications for the preferred Marathon Self-Contained Compactor) WASTE COMPACTORS AND DESTRUCTORS COMPACTOR
A118226 COMPACTOR WASTE COMPACTORS AND DESTRUCTORS COMPACTOR Ideally, the recycling carts and trash and cardboard dumpsters will be on the same pad and enclosure. However, the quantity, size, and type
Superior Guardian 7x20 3-Deck Horizontal Screen Plant
Superior Guardian 7x20 3-Deck Horizontal Screen Plant #1036843 Carrier chassis Main frame constructed of wide flange structural steel beams Tandem axle with (8) 11x22.5 radial tires complete air brake
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 Gas Convection Steamers C24GA6 ML-136056 C24GA10 ML-136057 C24GA6 ML-136021 C24GA10 ML-136022 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
M O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.08 C M A D I S H M A C H I N E S K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841
M O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.08 C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 54-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
RESERVEDELS KATALOG KORO - FB
RESERVEDELS KATALOG KORO - FB 1 - Door 1 - Door 1 251877 DOOR 2 252096 PLUS FB LOGOTYPE-PRODUCT LABEL 3 252137 DOOR LOCK 4 251785 KEYBOARD REFERENCE 5 251783 DOOR GLASS 6 251784 DOOR COVERING 7 987612
LITERS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS GALLONS PER MINUTE
TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications PRG - SERIES Residential Grinder Pump 60 LITERS PER MINUTE 0 20 40 60 80 100 120 140 160 180 18 50 16 14 40 12 30 10 8 20 6 10 4 2 0 0 0 10 20
3K111-3K193 3K361-3K393. 3K Series - Single Stage Stainless Steel End-Suction Centrifugal Pumps RPM Models RPM Models FEATURES
3K Series - Single Stage Stainless Steel End-Suction Centrifugal Pumps 34 RPM Models 3K-3K93 FEATURES 4SSL liquid-end construction offers corrosion resistance and increases operating life over typical
BISTRO 2 Hot Chocolate Dispenser SPARE PARTS CATALOG
Hot Chocolate Dispenser SPARE PARTS CATALOG TABLE OF CONTENTS WHIPPER ASSEMBLY Pages 3-4 HOPPER ASSEMBLY Pages 4-5 TANK ASSEMBLY Pages 6-9 SWITCHES Page 9 DOOR ASSEMBLY Pages 10-11 MISCELLANEOUS COMPONENTS
Series MSC Sewage Chopper Pumps
Capacities to 450 GPM Heads to 65 Feet HP to 10 HP-1750 RPM Series MSC Sewage Chopper Pumps Hardened tungsten carbide edged rotating impeller cutting and chopping against stationary chrome hardened suction
MODEL 5A SPECIFICATION
MODEL 5A SPECIFICATION 1.0 General Specifications There shall be furnished one (1) one only Grind Hog TM Model 5A HEAVY DUTY Comminutor as manufactured by G.E.T. Industries Inc. with rotation in a counter-clockwise
MODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A
MODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
Technical Information Features Fast Response - Bubble Tight Sealing Small Size - 4 Inches High Single Solenoid - Only 3 Moving Parts Pilot Interchange
Model Number Index Function / Mounting Style N195 4-Way Line Mounting N205 4-Way Non Plug-In Manifold Mounted N215 4-Way Plug-In Manifold Mounted Line Mounting, Non Plug-In, Manifold Mounting Function
4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
AquaBoost. Variable Speed Constant Pressure Systems MODEL ABS
PRODUCT OVERVIEW The AquaBoost pump controller and complete booster package kits provide an economical answer for municipal water district customers with low water pressure. Both domestic and light commercial
PARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE
PARTS MANUAL MODEL: TF-2025M SERIAL NO: 543-99101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
PARTS MANUAL. American Dish Service MODELS: ADC-44 L-R/R-L ADS CONVEYOR DISHWASHER EFFECTIVE: MAY, 2008
EFFECTIVE: MAY, 2008 ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 211-0044L-R / 212-0044R-L ADC-44 Conveyor Dishwasher 2 211-0044L-R
Washer-Extractor. Parts. Twin Tub. UM202 - Design 2 and 3 Models. Design 2 Models. Design 3 Models CAR5C_F232208
Washer-Extractor Twin Tub UM202 - Design 2 and 3 Models Parts Design 2 Models Design 3 Models CAR5C_F232208 www.alliancelaundry.com Part No. F232208R12 November 2014 Table of Contents Title Page Parts
Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION. Packaged Pump Sets for Diesel/Fuel Oil Application Page 1
Packaged Pump Sets for Diesel/Fuel Oil Application Page 1 Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION Packaged Pump Sets for Diesel/Fuel Oil Application Page 2 Description Simplex SPS Series Packaged
MODEL 7ASX-8 SPECIFICATION
MODEL 7ASX-8 SPECIFICATION 1.0 General Specifications There shall be furnished one (1) one only Grind Hog TM Model 7ASX-8 HEAVY DUTY Comminutor as manufactured by G.E.T. Industries Inc. with rotation in
Reverse Osmosis Systems Section 11 Reverse Osmosis Systems
Section 11 Section 11 Catalog 999701-NP Rev. E (03/16) Effective 03/01/16 Section 11 Table of Contents REVERSE OSMOSIS SYSTEMS SPECIFICATIONS AND DESIGN DATA PVE SERIES - 14,400-43,200 GPD...11-1 HVE SERIES
DRINK SINGLE CUP BREWER
SPARE PARTS CATALOG ENTERPRISES, INC. CX TOUCH SERIES SPECIALTY DRINK SINGLE CUP BREWER WITH AUTO EJECT Left Blank Intentionally 4-12-17 NEI 1.800.325.7867 www.newcocoffee.com P a g e 2 TABLE OF CONTENTS
TotalPac 3 Firecyle III Wet pipe Remote controlled system
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a Firecycle III system trim totally preassembled, pre-wired and factory tested. All electrical
DETAILED EQUIPMENT SPECIFICATION MRO-4 SERIES REVERSE OSMOSIS SYSTEMS
5356 Hillside Avenue Indianapolis, IN 46220 P: +1 888-56-Water (569-2837) F: +1 317-255-4727 info@nancrede.com www.nancrede.com DETAILED EQUIPMENT SPECIFICATION MRO-4 SERIES REVERSE OSMOSIS SYSTEMS 1.0
Series CC Condensate Units
Bulletin S-215F Series CC Condensate Units Simplex or Duplex 1,000 thru 15,000 sq. ft. EDR 250 thru 7,500 lb./hr. Cast Iron Receivers: for years of dependable service; warranted for 20 years from date
Model Description Vac. Max rating Pedestal Only: 36 Utility Pedestal W/O Disconnect General Duty Series:
MAPA Products MPD-XX / Pedestal Disconnect 30, 60, 100 amp February 2014 Pedestal Disconnect Installation Instructions Parts List MAPA Products Fusible Rainproof Pedestal Mounted Safety Switch provides
Operating Manual for Hands-Free Wall Mounted Sinks Models 607D and 607D-0.5
1 Operating Manual for Hands-Free Wall Mounted Sinks Models 607D and 607D-0.5 Columbia does not recommend use with harsh chemicals. NSF/ANSI Standard 2 - Food Equipment and NSF/ANSI 372 low-lead. 2 Parts
TotalPac 3 Deluge system Pneumatic release
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a deluge system trim totally preassembled, pre-wired and factory tested. All electrical and
Washer-Extractor. Parts. Cabinet Freestanding. See Page 3 for Model Numbers R001C P/N
P/N 230816 DOOR UNLOCK BUTTON PRESS & HOLD Washer-Extractor Cabinet Freestanding See Page 3 for Model Numbers Parts R001C Part No. F230557R1 April 1999 Table of Contents Title Page Parts Ordering Information...
AMERICAN STAINLESS PUMPS STAINLESS STEEL PUMPS FOR THE COMMERCIAL MARKETPLACE
FSP CENTRIFUGAL PUMP AMERICAN STAINLESS PUMPS STAINLESS STEEL PUMPS FOR THE COMMERCIAL MARKETPLACE FSP CENTRIFUGAL PUMP Flow Rates up to gpm System pressures up to psig Temperatures up to 2 F Impellers
G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
SECTION LAUNDRY WASHER-EXTRACTOR, 100 LB. (45.4 KG) CAPACITY
SECTION 11110 LAUNDRY WASHER-EXTRACTOR, 100 LB. (45.4 KG) CAPACITY PART 1 GENERAL 1.01 SECTION INCLUDES: A. Automatic laundry washer-extractor for processing water-washed linen items 1.02 SYSTEM DESCRIPTION
Oper pe ati t ng i Presented by:
Operating Presented by: Topics Fill Mix & Sparge Feed Water Flush Clean Sanitize Drain Store Trouble shooting Maintenance Calibration The following presentation assumes that the Feed-R-Meter is equipped
69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
Regenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
Chempump. G Series. Canned Motor Pumps
Chempump G Series Canned Motor Pumps G SERIES Exceptional Fugitive Emissions Containment Chempump introduced the first hermetically sealed pump and motor design over 50 years ago, and we ve been improving
D51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
LEAD FREE * LFF113RFP Flood Protection Shut Down Valve
Technical Bulletin TB-ACV-LFF11RFP LEAD FREE * LFF11RFP Flood Protection Shut Down Valve Installed upstream of Reduced Zone Backflow Preventer. Normally Open Valve - Closes when continuous discharge from
Parts Manual 400A. Band Sawing Machine
Parts Manual 400A Serial No: 595-10101 to Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning your
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
Polar Trac Cab Groundsmaster 7200 Series Mower
Form No. 3408-250 Rev A Polar Trac Cab Groundsmaster 7200 Series Mower Model No. 30474 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3408-250* A Ordering Replacement
NH 3. Evaporator. Ammonia Applications Tons MANP
NH 3 Evaporator Ammonia Applications 12-108 Tons > > Used for medium TO large Industrial Ammonia applications Manufactured with Stainless steel tubes. The Global Leader In Heat Exchange Technology With
MPS 1-L Manual Powder System with the PG 1 Powder Gun
bar... 0. m /h 00 00 90 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 kv µa E Operating Instructions and Spare Parts List MPS -L Manual Powder System with the PG Powder Gun 0 0 + m /h Issued 0/9 MPS -L / PG An ITW
Generator Fire Safety: Generator assemblies should be located outside the building.
SECTION 33 70 00 - ELECTRICAL DISTRIBUTION PACKAGED GENERATOR ASSEMBLIES Generator Fire Safety: Generator assemblies should be located outside the building. All fuel piping from the outside of the building
TGIF-3. Indirect Fired Heating Systems. Technical Guide for: IF Indoor Installations. IFW Outdoor Installations. Applied Air. Keeps You.
TGIF-3 Indirect Fired Heating Systems Technical Guide for: IF Indoor Installations IFW Outdoor Installations Applied Air Keeps You Warm Indirect Fired Heating Systems Technical Guide In the business of
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
Replacement Parts List
Replacement s List Includes Illustrations and Replacement s Dryflo Mist Collectors and Patent s: 5,611,922 6,007,608 This manual is property of the owner. Leave with the unit when set-up and start-up are
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS C24GA6 C24GA10 ML-136056 ML-136057 PRIOR MLS COVERED IN THIS MANUAL C24GA6 C24GA10 ML-136021 ML-136022 For additional information on
Hydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
Classifying System. Aggre-Spec
Aggre-Spec Classifying System Up to 12 x 48 Groundbreaking, user-friendly computer controls blends a higher quality product with highest product output. High pressure hydraulics for the fastest control
SERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0806A3-W3-R4, ICE1006A3-W3-R4 Includes 50Hz. and 3 Phase Units
SERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0806A3-W3-R4, ICE1006A3-W3-R4 Includes 50Hz. and 3 Phase Units Ice-O-Matic 11100 East 45th Ave Denver, Colorado 80239 Part Number 9081307-02 Date 1/09
SPECIFICATIONS ULTIMAX SUB-SURFACE DIRECTIONAL AERATION SYSTEM
SPECIFICATIONS ULTIMAX SUB-SURFACE DIRECTIONAL AERATION SYSTEM 1.0 GENERAL 1.1 DESCRIPTION A. Manufacturer shall furnish an aspirating directional aerator (aspirator) or a high-flow directional aerator
Pump Specifications. D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND
Pump Specifications D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND 200 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 60 190 180 170 160 LSGX - TWO STAGE 50 150 140 130 40 FT. OF HEAD
CT SEPARATOR SYSTEM OPERATION & MAINTENANCE MANUAL
CT SEPARATOR SYSTEM OPERATION & MAINTENANCE MANUAL PLEASE RECORD THE FOLLOWING DATA (Information is located on the product label or packing slip) Model Number: Date Code: Installation Date: Installation
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10