Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION. Packaged Pump Sets for Diesel/Fuel Oil Application Page 1

Size: px

Start display at page:

Download "Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION. Packaged Pump Sets for Diesel/Fuel Oil Application Page 1"

Dylan Sharp
5 years ago
Views:

1 Packaged Pump Sets for Diesel/Fuel Oil Application Page 1 Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION

Packaged Pump Sets for Diesel/Fuel Oil Application Page 2 Description Simplex SPS Series Packaged Pump Sets are pre-engineered, integrated systems of pumps, pump drivers, controls and accessories,

2 Packaged Pump Sets for Diesel/Fuel Oil Application Page 2 Description Simplex SPS Series Packaged Pump Sets are pre-engineered, integrated systems of pumps, pump drivers, controls and accessories, pre-plumbed and pre-wired, totally contained within an enclosure equipped with a leak detection basin. External ports are provided for connection of field plumbing. Four models are available spanning from 2 GPM through 36 GPM, simplex, duplex, triplex or quadplex pumps; 0.33 through 7.5 HP and are suitable for wall or pad mounting. Isolated compartments are provided for mechanical and electrical devices. Full system integration of pumps, starters, controls, tank monitors, tank level controls, external alarm panels is provided. If requirements exceed the capacity of an SPS enclosure, pump sets can be specified skid-mounted. Simplex SKS Series Skid Pump Sets offer the customer a greater variety and quantity of options but because of the open catch basin design they are suitable for indoor installation only. Simplex Packaged Pump Sets are intended for use with fuel oil or lube oil. Features System engineered, integrated function packages TYPE 1 indoor enclosure, primed and painted TYPE 3R weatherproof enclosure, primed and painted, available Wall or pad mountable Segregated electrical/mechanical compartments within enclosure Enclosure drip pan and leak detector Pressure relief valve, external port for relief to tank available SPS-10-SS Packaged Pump Set Pump disconnect circuit upon leak detection Inlet, outlet and pressure relief manifolds (SPS Series only) Fuel connections made to fittings in sidewalls (SPS Series only) High performance hydraulic gear pumps Pump shutoffs available Industrial motors Motor starter with overload relay and disconnect available Disconnect switch interlocked with hinged door Simplex, duplex, triplex, quadplex pumps available Automatic duplex pump controllers available Tank Commander tank monitors, PLC Control, level controllers, annunciators, fill panels, overfill panels are available as options Packaged Pump Sets can be engineered with Simplex Main Storage Tanks, Day Tanks and Fuel Supply Systems

Packaged Pump Sets for Diesel/Fuel Oil Application Page 3 MODEL SINGLE DUPLEX TRIPLEX QUADPLEX SPS-10 10GPM-¾HP N/A N/A N/A SPS-25 25GPM-1½HP 17GPM-1HP 2GPM-½HP N/A Application Guide SPS-55 35GPM-5HP

Use also for high pressure applications up to 2500 PSI. Do not use for noise sensitive applications.

3 Packaged Pump Sets for Diesel/Fuel Oil Application Page 3 MODEL SINGLE DUPLEX TRIPLEX QUADPLEX SPS-10 10GPM-¾HP N/A N/A N/A SPS-25 25GPM-1½HP 17GPM-1HP 2GPM-½HP N/A Application Guide SPS-55 35GPM-5HP 25GPM-2HP 7GPM-1HP 2GPM-½HP CHOOSING A PUMP Super-XL Pump for applications where the pump starts and stops on demand, such as for automatic tank refilling. Use for viscosity to 1000 SSU. Use also for high pressure applications up to 2500 PSI. Do not use for noise sensitive applications. Series 420 & 500 Pumps (cast iron gear) for continuous duty applications where the pump runs nonstop for extended periods of time. Use for boiler feed loop applications. Use also for noise sensitive applications. Viscosity from 32 to 5000 SSU or higher with slow speed motor. CHOOSING A MODEL SPS-10 simple single pump applications SPS-25 complex single pump applications involving starters and level controllers or simple duplex and triplex pump applications involving starters and duplex controller SPS-55 complex and large, single pump applications involving starters and level controls or complex duplex, triplex, quadplex pump applications involving starters and controllers SKS size and complexity is dependent on available site space, rated TYPE 1 indoor WARNING: These Pump Sets are not intended for use with gasoline or other flammable liquids having a flash point less than 100 F. Use with gasoline or use with any flammable liquids at a temperature exceeding the flash point of that liquid, presents an immediate explosion and fire hazard. Do not use the Pump Set at a temperature exceeding the flash point of its contents. SPS-25-SD Mechanical Compartment

4 Packaged Pump Sets for Diesel/Fuel Oil Application Page 4 Standard Equipment List NOTE: All Standard Pump Sets include Super-XL 2GPM, 1/3HP, 115V AC pumps and containment sump with leak sensor. Optional pumps and motors are available. Consult Simplex for cabinet size when multiple options are required. SINGLE PUMP Basic (-BS) Super (-SS) Opt. 260, door mounted disconnect switch with interlock Opt. 768, single-phase starter with coil wired to terminal block Opt. 087, shut-off valves on inlet and outlet Opt. 095, pressure relief valve Opt. 070, check valve SPS-10 SPS-25 SPS-55 SINGLE Basic (-BS) X X X Super (-SS) X X X DUPLEX Basic (-BD) X X Super (-SD) X X Engineer Specifications (-ED) DUPLEX PUMP Basic (-BD) Opt. 345, automatic duplex pump controller Opt. 070, check valve Opt. 087, shut-off valves on inlet and outlet Super (-SD) Opt. 345, automatic duplex pump controller Opt. 070, check valve Opt. 260, door mounted disconnect switch with interlock Opt. 768, single-phase starter Opt. 087, shut-off valves on inlet and outlet Opt. 095, pressure relief valve Engineer Specifications (-ED) Opt. 345, automatic duplex pump controller Opt. 070, check valve Opt. 260, door mounted disconnect switch with interlock Opt. 768, single-phase starter Opt. 087, shut-off valves on inlet and outlet Opt. 095, pressure relief valve Opt. 060, fuel strainer Opt. 100, pressure gauge with isolation hand valve, each pump outlet Opt. 101, vacuum gauge with isolation hand valve, each pump inlet Opt. 285, loss of flow alarm/lag pump activate X

Packaged Pump Sets for Diesel/Fuel Oil Application Page 5 Description The Simplex SUPER-XL is a high-technology hydraulic pump featuring pressure-loaded, selfcompensating gears and a mechanical shaft

Features Pressure loaded design Efficient, simple design with few moving parts Exceptionally compact and lightweight for their capacity Efficient at high pressure operation Resistant to cavitation

5 Packaged Pump Sets for Diesel/Fuel Oil Application Page 5 Description The Simplex SUPER-XL is a high-technology hydraulic pump featuring pressure-loaded, selfcompensating gears and a mechanical shaft seal. The SUPER-XL is the standard pump used in Simplex Packaged Pump Sets and is available in 2-25 GPM capacity range. Features Pressure loaded design Efficient, simple design with few moving parts Exceptionally compact and lightweight for their capacity Efficient at high pressure operation Resistant to cavitation effects High tolerance to system contamination Reliable under cold weather operation Sleeve bearing construction Multi-Fluid compatibility SUPER-XL Pumps Flow, GPM (LPM) PUMP DISPLACEMENT RPM 100 PSI 1000 PSI 1500 PSI 2000 PSI 2500 PSI MODEL IN 3 (CC/REV.) (6.9 Bar) (69 Bar) (103 Bar) (138 Bar) (172 Bar) SUPER XL-11 (4.29) (7.54) (7.05) (6.78) (6.56) (6.29) SUPER XL-39 (15.44) (26.83) (26.04) (25.66) (25.24) (24.86) SUPER XL-62 (24.14) (42.07) (40.97) (40.55) (40.17) (39.42) SUPER XL-90 (36.5) (63.29) (62.54) (61.78) SUPER XL-114 (54.9) (95.89) (94.37) (93.23) (92.48) Simplex Series 420 & 500 internal gear rotary pumps are used for lubricating, low pressure hydraulic, transfer, circulating, burner oil and many other industrial pump applications. Precisely machined and assembled with only two moving parts, they achieve and retain their reliability over a wider range of viscosities than alternative pump designs. And they re substantially quieter than other pump designs. All rotors are precision milled and ground. All models have bushing support provided for the rotor shaft for added reliability. Pumps are equipped with a mechanical seal. With optional seals available in a number of different materials, these pumps can meet almost any temperature or fluid compatibility requirement. A wide range of configurations with capabilities from 1.8GPM to 35GPM is available. There are only two moving parts. Pumping action is based on a rotor, idler gear and crescentshaped partition cast integral with the cover. Optional automatic reversing is available. Models 420, 422, and 424 are UL Listed. Series 420 & 500 Pumps MATERIALS OF CONSTRUCTION IDLER HOUSING COVER ROTOR IDLER PIN SEAL MECHANICAL CAST CAST STEEL IRON HARDENED CARBON RING IRON IRON STEEL NI-RESIST OR CERAMIC SEAL

6 Packaged Pump Sets for Diesel/Fuel Oil Application Page 6 Dimensions and Key Features SPS Pressure Relief Outlet, ¾" NPT Male 2. Pump Inlet, ¾" NPT Male 3. Pump Outlet, ¾" NPT Male 4. Customer Conduit Entry, ½" NPT 5. Vent Louvers 6. Mounting Holes (6),.437" x.875" Dia. 7. Ground Stud 8. Motor 9. Pump 10. Fuel Line Leak Sensor 11. Mounting Holes (12),.437" x.875" Dia. 12. Lockable Latch 13. Sump Drain Plug SPS Main Disconnect Switch 2. Ball Valve (4), Opt Check Valve (2), Opt Fuel Line Leak Sensor 5. Sump Drain Plug 6. Pump (2) 7. Motor (2) 8. Drip Pan 9. Fuel Strainer (2), Opt Junction Box 11. Mounting Holes (6),.437" x.875" Dia. 12. Pump Outlet, 1" NPT Male 13. Pressure Relief Outlet, 1" NPT Male 14. Pump Inlet, 1" NPT Male 15. Wall Mounting Holes (14),.437" x.875" Dia. 16. Lockable Latch (2) 17. Customer Conduit Entry, 1½" and 1" NPT, both sides 18. Vent Louvers, both sides

7 Packaged Pump Sets for Diesel/Fuel Oil Application Page 7 SPS Mounting Holes (12),.437" x.875" Dia. 2. Pump Outlet, 1" NPT 3. Pressure Relief Outlet, 1" NPT 4. Pump Inlet, 1.5" NPT 5. Weatherproof Outer Door, Opt Wall Mounting Holes (14) -.437" x.875" Dia. 7. Ball Valve (3), Opt Check Valve - Opt Fuel Strainer, Opt Junction Box 11. Pressure Relief Valve, Opt Pump (2) 13. Motor (2) 14. Sump Drain Plug 15. Fuel Line Leak Sensor 16. Fuel Strainer (2), Opt Drip Pan 18. Vent Louvers, both sides 19. Lockable Latch 20. Latch (3) SKS Mounting Holes (4), ¾" 2. Motor 3. Pump 4. Pump Outlet, Ball Valve, ¾" NPT 5. Pump Inlet, Ball Valve, ¾" NPT 6. Sump Drain, Both Sides (2), ½" NPT 7. Fuel Line Leak Sensor

8 Packaged Pump Sets for Diesel/Fuel Oil Application Page 8 SKS Mounting Holes (4), ¾" 2. Pressure Relief Outlet, ¾" NPT Male 3. Motor (2) 4. Pump (2) 5. Ball Valve (4), Opt Fuel Strainer (2), Opt Auxiliary Inlet, 1" NPT 8. Pump Unit Outlet, 1" NPTM 9. Check Valve (2), Opt Flowswitch (2), Opt Sump Drain, Both Sides (2), ½" NPT 12. Fuel Line Leak Sensor 13. Pump Unit Inlet, 1" NPT SKS Mounting Holes (4), ¾" 2. Pressure Relief Outlet, ¾" NPT Male 3. Motor (2) 4. Pump (2) 5. Ball Valve (4), Opt Fuel Strainer (2), Opt Pump Inlet, 3" NPT 8. Pump Unit Outlet, 2" NPT 9. Flowswitch (2), Opt Check Valve (2), Opt Sump Drain, Both Sides (2), ½" NPT 12. Fuel Line Leak Sensor 13. Main Disconnect Switch, Opt. 260

Packaged Design Day Tank Systems

Fuel Supply Systems Packaged Design Day Tank Systems for diesel/fuel oil application providing a reliable fuel source for diesel and turbine engine driven equipment and oil fired boilers model & accessory