Verderflex Dura 10 Technical Data Sheet
|
|
|
- Augustus Palmer
- 6 years ago
- Views:
Transcription
1 11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 1.6 Gal/rev.5 Pumphead Absorbed Power (HP) psi 72.5 psi psi CSM EPDM 1/14 12/16 14/175 16/195 18/215 Product temperature limitations ( F) Pump Speed (rpm) Rate (GPM) (HP) High Pressure (SP) Standard Pressure SP Intermittent use HP Intermittent use Description Material Description Material Pump housing Cast Steel ASTM A216: WCB (RAL Green) Torque arm EN125 Structural Steel (RAL 721) Front cover Polycarbonate Bearing Stainless Steel Grade EN (44c) Cast Aluminum A356.1 Option: Cast Iron ASTM A48 class 4B Shaft seal Option: Viton, PTFE Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant Flange coating option Halar Anti-Corrosion coating Hose, Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL Grey) Weight - Complete pump including drive Inverter (Optional) 42 lbs 6½ lbs
2 11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 1 General Assembly Drawing 4.4" 15.4" 6.3".6" Suitable for M8 / 1 4" fi xing bolts 3.6" 2.1" 8" 8.7" 2.1" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM Pump Speed RPM Installed Motor Power HP Std (for up to 9 PSI HP (for up to 115 PSI Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. Dura pumps for discharge pressures over 115 PSI are available to special order D1 - DSG - OCT7
3 11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 15.2 Gal/rev.7 Pumphead Absorbed Power (HP) psi 72.5 psi 43.5 psi psi CSM EPDM 1/14 12/16 14/175 16/195 18/215 Product temperature limitations ( F) Pump Speed (rpm) Rate (GPM) (HP) High Pressure (SP) Standard Pressure SP Intermittent use HP Intermittent use Description Material Description Material Pump housing Cast Steel ASTM A216: WCB (RAL Green) Torque arm EN125 Structural Steel (RAL 721) Front cover Polycarbonate Bearing Stainless Steel Grade EN (44c) Cast Aluminum A356.1 Option: Cast Iron ASTM A48 class 4B Shaft seal Option: Viton, PTFE Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant Flange coating option Halar Anti-Corrosion coating Hose, Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL Grey) Weight - Complete pump including drive Inverter (Optional) 66 lbs 6½ lbs
4 11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 15 General Assembly Drawing 6.4" 18." 7.1".7" Suitable for M1 / 3 8" fi xing bolts 3.8" 2.5" 1.1" 1.9" 2.5" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM Pump Speed RPM Installed Motor Power HP Std (for up to 9 PSI HP (for up to 115 PSI Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. Dura pumps for discharge pressures over 115 PSI are available to special order D15 - DSG - OCT7
5 11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 25.7 Gal/rev 2.4 Pumphead Absorbed Power (HP) psi 72.5 psi 43.5 psi psi CSM EPDM 1/14 12/16 14/175 16/195 18/215 Product temperature limitations ( F) Pump Speed (rpm) Rate (GPM) (HP) High Pressure (SP) Standard Pressure SP Intermittent use HP Intermittent use Description Material Description Material Pump housing Cast Steel ASTM A216: WCB Torque arm EN125 Structural Steel (RAL 721) (RAL Green) Front cover Polycarbonate Bearing Stainless Steel Grade EN (44c) Cast Aluminum A356.1 Option: Cast Iron ASTM A48 class 4B Shaft seal Option: Viton, PTFE Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant Flange coating option Halar Anti-Corrosion coating Hose, Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL Grey) Weight - Complete pump including drive Inverter (Optional) 18 lbs 6½ lbs
6 11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 25 General Assembly Drawing 8.9" 3.1" 22.1" 1.9" 11.8" 9.4".8" Suitable for M1 / 3 8" fi xing bolts 3.4" 5.4" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM Pump Speed RPM Installed Motor Power HP Std (for up to 9 PSI HP (for up to 115 PSI Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. Dura pumps for discharge pressures over 115 PSI are available to special order D25 - DSG - OCT7
7 Verderflex Dura US Gallon/rev Pumphead RMS Absorbed Power (HP) psi 87 psi psi CSM/ EPDM 1/14 12/16 14/175 16/195 18/215 Product Temperature Limitations (ºF) Pump Speed (rpm) (US GPM) Continuous (Verderlube) Continuous (Verdersil) Intermittent min 1hr running 1 hr stopped Intermittent min 1hr running 2 hr stopped Description Material Description Material Pump housing Cast Iron GG25 Torque arm EN125 Structural Steel (RAL 721) (RAL Green) Front cover Powder Coated Steel (RAL Black )with Polycarbonate Inspection Window Bearing Cast Iron GG25 Shaft seal Viton Option: PTFE Stainless Steel Grade EN (44c) Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Universal to suit DN32 DIN PN16, 1¼, ANSI 15# 32 mm and JIS 1k Optional Verdersil - Silicone based lubricant Optional Flange Materials Polypropylene (PP) and Polyvinylidene (PVDF) Hose Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL Grey) Weight -Complete pump including drive 276 #
8 Verderflex Dura 35 General Assembly Drawing 19.33" O/ALL WIDTH 1.9" CTRS 26.4" O/ALL HEIGHT 12.8" O/ALL DEPTH.63" 1.94" SLOT CTRS 14.64" 17.63" Suitable for ½ M12 Fixing Bolts 3.6".5" SLOT.63" 13.31" SLOT CTRS 14.64" 17.63" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorised Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM l/hr Pump Speed RPM Std (for up to 6 Bar discharge pressure) HP (for up to 12 Bar , , , , , , , A A Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. VERDER Ltd Whitehouse Street, Hunslet, LEEDS, LS1 1AD Tel: +44 () Fax: +44 () info@verderflex.com Affiliated companies: A Wien B Aartselaar CZ Praha D Haan F Eragny s/oise GB Leeds H Budapest JPN Tokyo NL Groningen/Vleuten PL Katowice RO Bucaresti SA Johannesburg USA Newtown
DURA. Verderflex DURA Peristaltic Hose Pump
DURA Verderflex DURA Peristaltic Hose Pump Verderflex Dura industrial hose pump With the introduction of the new Verderflex DURA range of pumps the Verder Group has moved peristaltic hose pumps to a new
Verderflex Industrial hose pumps The Verderflex range of industrial hose pumps is a high quality family of peristaltic pumping solutions. These pumps
Industrial hose pumps Verderflex Industrial hose pumps The Verderflex range of industrial hose pumps is a high quality family of peristaltic pumping solutions. These pumps reduce downtime, minimse maintenance
VERDERFLEX Peristaltic tube pumps & dosing systems
VERDERFLEX VP This Peristaltic brochures tube contains pumps & a dosing technical systems story VERDERFLEX Peristaltic tube pumps & dosing systems Verderflex Peristaltic tube pump series Verderflex VP
The Green Peristaltic Pump
NEW NEW NEW NEW NEW The Green Peristaltic Pump ROLLIT s key features: Lube free design Standard & Twin pump series Easy to maintain We put our heart into pumps A well-functioning pump helps you succeed.
R Series Internal Rotary Gear Pumps
VERDERgear R Series Internal Rotary Gear Pumps Verdergear R Series Internal Rotary Gear Pumps Verdergear R Series Internal Rotary Gear Pumps The Verdergear range of pumps offers an excellent solution for
Delivery Program VERDER LTD
VERDER LTD Delivery Program Air operated double diaphragm pumps Mag drive centrifugal pumps Peristaltic pumps Self Priming pumps Progressing cavity pumps Gear pumps Booster sets Pumping partners Service
Peristaltic Industrial Hose Pump
Peristaltic Industrial Hose Pump Version Print-No. 0.0v-05/207 5, 7, 0, 5, 25, 35 Version.0v-05/207 Print-No. 0 5, 7, 0, 5, 25, 35 Version.0v-05/207 2 Page Table contains a list of spares to help maintain
The most efficient diaphragm pump series now complete!
NEW NEW NEW NEW NEW The most efficient diaphragm pump series now complete! HI-CLEAN s key features: DIN 11851 or Tri-Clamp According to EC 1935/2004 & FDA CIP/SIP Strip Cleaning: Fast disassemble DIN
1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
Mag Drive Centrifugal Pumps
VERDERmag Global Mag Drive Centrifugal Pumps Verdermag Any mag drive you want we got it Verdermag Global Verdermag Global metallic centrifugal pumps are synchronous magnet-driven seal-less pumps. The Verdermag
1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
BFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
VIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
Tranquilizer. Surge Suppression for Air-Driven Diaphragm Pumps. Visit our website!
Quality System ISO9001 Certified Environmental Management Systems ISO14001 Certified Tranquilizer Surge Suppression for Air-Driven Diaphragm Pumps Virtually surge-free flows Steadier pressures Less vibration
Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
Unlined valves with flanged ends
Main Parts and Materials Unlined valves with flanged ends NO. PART MATERIA 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl
VERDERFLEX PRODUCT OVERVIEW. industrial peristaltic pump range cased drive peristaltic pump range peristaltic OEM pumps consumables
VERDERFLEX PRODUCT OVERVIEW industrial peristaltic pump range cased drive peristaltic pump range peristaltic OEM pumps consumables A well-functioning pump helps you succeed. That applies certainly to the
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
ptfe seated 30 years of high quality experience
ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation
G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
NDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
BYV Series Butterfly Valve Product Guide FLOW CONTROL
BYV Series Butterfly Valve Product Guide FLOW CONTROL 17 Q U A L I T Y S E R V I C E I N T E G R I T Y 1 OVERVIEW Engineered Hand Lever Design for Enhanced Strength and UV Performance Ergonomic Grip and
Materials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
NS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
Technical Data. BiRotor Plus Positive Displacement Meter
Technical Data BiRotor Plus Positive Displacement Meter B27X 3 ANSI (DN80) B30X 6 ANSI (DN150) B28X 4 ANSI (DN100) B31X 8 ANSI (DN200) B29X 6 ANSI (DN150) B32X 10 ANSI (DN250) General The BiRotor Plus
3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
VACOMASS. Technical information VACOMASS control valve. Version Diaphragm control valve with central or falling flow axis
VACOMASS Technical information Diaphragm control valve with central or falling flow axis Version 2012-02 DESCRIPTION OF CONSTRUCTION AND FUNCTION SPECIAL CHARACTERISTICS: Universal use: The slidegate valve
Air Powered Double Diaphragm Pumps
Air Powered Double Diaphragm Pumps Notes. TC-X 030 Series Standard Diaphragm Pumps with 1/4" Connections Liquid Flow Rate: Maximum Air Inlet Pressure: Wetted Body Material Options; 1 to 8 L/min. (2.14
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Diaphragm seal with threaded connection Plastic version Model
Pressure Diaphragm seal with threaded connection Plastic version Model 99.31 WIKA data sheet DS 99. for further approvals see page 5 Applications For aggressive, corrosive or environmentally hazardous
390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
Models 9202C, 9203C, 9252C-C, and 9253C-C
Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
SBE Butterfly Valves elastomer-lined PM 52 e / Modular Design
DN40 DN800 resp. 1½" 32" SBE Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
BELGICAST is a company of. Butterfly Valves
BELGICAST is a company of Butterfly Valves TALIS the number one choice for all valve-related products. TALIS is the major brand whenever products and services are needed for the water cycle. The brands
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
Double Diaphragm Pumps
VERDERair Double Diaphragm Pumps Verderair Double Diaphragm Pumps are problem solvers in all industries Verderair Double Diaphragm Pumps The series of Verderair double diaphragm pumps are highly engineered
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
AVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)
AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,
SCP Cylindrical Plug Valves plastomer-lined PM 22 e / Modular Design
DN15 DN100 resp. ½" 6" RP (red. port) SCP Cylindrical Plug Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even toxic process media in either liquid or gaseous
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 1 bigger sizes upon request Face-to-face:
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting 2 STAINLESS
G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries
G&L Series MPVN High Pressure Multi-Stage Pumps www.goulds.com Goulds Pumps ITT Industries A Full Range of Product Features Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
CR5-26 A-FGJ-A-E-HQQE 3x400D 50HZ
GRUNDFOS DATA BOOKLET CR5-26 A-FGJ-A-E-HQQE 3x4D 5HZ Grundfos Pump 96513391 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96513391/cr-5-26-a-fgj-a-e-hqqe.html
69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
DN25 DN1000 resp. 1" 42"
DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
BUTTERFLY VALVES PTFE SEATED
BUTTERFLY VALVES PTFE SEATED ghibsonvalves.com BUTTERFLY VALVES PTFE SEATED PTFE body seat has a thickness varying from 2,5 to 3 mm depending on the position, even in the shaft area. Discs are available
Prem Chem Butterfly Valves
10 butterfly Valves Prem Chem Butterfly Valves butterfly Valves 11 Design standards: gb12238, API609, MSS SP-67, MSS SP-68 Butterfly valves have become very popular because of compactness, weight and ease
AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Butterfly valves Plastic and Metal
Butterfly valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz
Style Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
CR3-2 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-2 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516649 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516649/cr-3-2-a-fgj-a-e-hqqe.html
VIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
Process Inline Filter Protective filter PLF2-9HF
Process Inline Filter Protective filter PLF2-9HF Specifications Nominal size: DN 300 - DN 600 Q s max: 3000 m 3 /h p s max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Protective
RCM - Direct Reading Flowmeters
Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale
Ghibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Butterfly valves. Soft seat PD - KI - KA - KX series
PD - KI - KA - KX series valve PD, KI Series 1 technical data 1 components DN 50-300 2 components DN 350-500 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data 5 technical data 5 KA series 6 components
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Series. NV Vertical Multistage Booster Pump
NV Vertical Multistage Booster Pump Series This series of vertical multistage booster pumps offer technically advanced designs to meet market demands including hot water applications. Every NV Series pump
TOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
Butterfly valves Plastic and Metal
Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement
CR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1-3 A-FGJ-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96537538 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537538/cr-1-3-a-fgj-a-e-hqqe.html
CR3-6 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR3-6 A-FGJ-A-E-HQQE 1x2/240 50HZ Grundfos Pump 96537577 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537577/cr-3-6-a-fgj-a-e-hqqe.html
Type / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
CRI3-6 A-FGJ-I-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRI3-6 A-FGJ-I-E-HQQE 3x23/4 5HZ Grundfos Pump 96527892 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/cri3/96527892/cri-3-6-a-fgj-i-e-hqqe.html
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
CR5-6 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR5-6 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 9651741 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651741/cr-5-6-a-fgj-a-e-hqqe.html
Diaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
CR3-19 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-19 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516663 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516663/cr-3-19-a-fgj-a-e-hqqe.html
Wafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C (with EPDM seat ) + 110 C ( with EPDM seat ) Max Pressure : 16
Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
1.4 F 012-A VÁLVULA BORBOLETA COM FLANGE DUPLO F012-A.
VÁVUA BORBOETA COM FANGE DUPO F0-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series 13 ISO 2 Series 13 API 0 Table 2C BS 1 short NF E 2-30.1 Flange accommodation:
FK Series Automated Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D3222 ASTM D4101 IPEX FK Series Automated Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments
BIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with