Unlined valves with flanged ends
|
|
- Brianna Allen
- 5 years ago
- Views:
Transcription
1 Main Parts and Materials Unlined valves with flanged ends NO. PART MATERIA 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl (D30) / Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET WC_ WD_ Cast Iron EN-J1040 (GG25) Ductile Iron EN-JS1030 (GGG40) NO. PART MATERIA 5 SPINDE Steel 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel (EN42) 8 BODY STUDS Steel 9 BODY NUTS Steel 10 THRUST WASHER NYON 11 COMP. PIN Steel (EN42) TO EN PN10 TO ASA150#* DN BS DIN H (open) H1 (close) a ØW ØD C ØR f nxød 4x14 4x14 4x14 4x18 4x18 4x18 4x18 ØK ØD C 11,5 11,5 11, , ,5 ØR f 1,6 1,6 1,6 1,6 1,6 1,6 1,6 nxød 4x16 4x16 4x16 4x16 4x16 4x19 4x19 ØK 60,3 69,8 79,4 88,9 98,4 120,6 139,7 BS 2,3 3,2 4,2 6,4 7, DIN 2,7 3,5 4,4 6,6 8,5 12,5 19 *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied 228
2 Unlined valves with flanged ends TO EN PN10 TO ASA150#* DN BS DIN H (open) H1 (close) a 190 Ø230 Ø265 Ø320 Ø420 Ø502 Ø569 ØW ØD C ØR f nxød 8x18 8x18 8x18 8x22 8x22 12x22 12x22 ØK ØD C 19, , ,5 32 ØR f 1,6 1,6 1,6 1,6 1,6 1,6 1,6 nxød 4x19 8x19 8x22 8x22 8x22 12x22 12x22 ØK 152,4 190,5 215,9 241,3 298,4 361,9 431,8 BS DIN *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied 229
3 Rubber lined valves with flanged ends Main Parts and Materials NO. PART MATERIA 1 BODY 1A 2 INING DIAPHRAGM + BACKING WC_ WD HR SR BR ER N_ RUBBER Cast Iron EN-J1040 (GG25) Ductile Iron EN-JS1030 (GGG40) Hard Rubber Soft Rubber Butyl Rubber EPDM Rubber Neoprene Rubber Natural (D10) / EPDM (D20) / Butyl (D30) / Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) NO. PART MATERIA 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET WC_ Cast Iron EN-J1040 (GG25) WD_ Ductile Iron EN-JS1030 (GGG40) 5 SPINDE Steel/ Acero 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel (EN42) 8 BODY STUDS Steel 9 BODY NUTS Steel 10 THRUST WASHER NYON 11 COMP. PIN Steel (EN42) FANGED EN PN10 FANGED ASA150#* DN BS DIN H (open) H1 (close) f a ØW ØD C nxød 4x14 4x14 4x14 4x18 4x18 4x18 4x18 ØK ØD C 11,5 11,5 11, , ,5 nxød 4x16 4x16 4x16 4x16 4x16 4x19 4x19 ØK 60,3 69,8 79,4 88,9 98,4 120,6 139,7 BS 3,2 3,4 4,7 7 8, DIN 3,5 3,7 5 8,2 9,5 13,3 22,5 *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied 230
4 Rubber lined valves with flanged ends FANGED EN PN10 FANGED ASA150#* DN BS DIN H (open) H1 (close) f a 190 Ø230 Ø265 Ø320 Ø420 Ø502 Ø569 ØW ØD C nxød 8x18 8x18 8x18 8x22 8x22 12x22 12x22 ØK ØD C 19, , ,5 32 nxød 4x19 8x19 8x22 8x22 8x22 12x26 12x26 ØK 152,4 190,5 215,9 241,3 298,4 361,9 431,8 BS DIN 28, *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied 231
5 Main Parts and Materials Fluoropolymer lined valves with flanged ends NO. PART MATERIA 1 BODY Ductile Iron EN-JS1030 (GGG40) 1A 2 INING DIAPHRAGM + BACKING PF ET RUBBER PFA ETFE Natural (D10) / EPDM (D20) / Butyl (D30) / Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET Ductile Iron EN-JS1030 (GGG40) NO. PART MATERIA 5 SPINDE Steel 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel (EN42) 8 BODY STUDS St. Steel SS304 9/9A BODY NUTS St. Steel SS THRUST WASHER NYON 11 COMP. PIN Steel (EN42) 232 FANGED EN PN10 FANGED ASA150#* DN BS DIN H (open) H1 (close) f a ØW ØD C ØR nxød 4x14 4x14 4x14 4x18 4x18 ØK ØD C 11,5 11,5 11, ,5 ØR nxød 4x16 4x16 4x16 4x16 4x16 ØK 60,3 69,8 79,4 88,9 98,4 BS 3,2 3,4 4,7 7 8,5 DIN 3,5 3,7 5 8,2 9,5 *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied
6 Fluoropolymer lined valves with flanged ends FANGED EN PN10 FANGED ASA150#* DN BS DIN H (open) H1 (close) f a Ø230 Ø265 Ø320 ØW ØD C ØR nxød 4x18 4x18 8x18 8x18 8x18 8x22 ØK ØD C 16 17,5 19, ,5 ØR nxød 4x19 4x19 4x19 8x19 8x22 8x22 ØK 120,6 139,7 152,4 190,5 215,9 241,3 BS DIN 13,3 22,5 28, *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied 233
7 Main Parts and Materials Halar coated valves with flanged ends NO. PART MATERIA 1 BODY 2 DIAPHRAGM WCH_ Cast Iron EN-J1040 (GG25) Halar WDH_ Ductile Iron EN-JS1030 (GGG40) lined RUBBER Natural (D10) / EPDM (D20) / Butyl (D30) / Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET WCH_ WDH_ Cast Iron EN-J1040 (GG25) Ductile Iron EN-JS1030 (GGG40) NO. PART MATERIA 5 SPINDE Steel 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel/Acero (EN42) 8 BODY STUDS St. Steel SS304 9 BODY NUTS St. Steel SS THRUST WASHER NYON 11 COMP. PIN Steel (EN42) 234 TO EN PN10 TO ASA150#* DN BS DIN H (open) H1 (close) a ØW ØD C ØR f nxød 4x14 4x14 4x14 4x18 4x18 ØK ØD C 11,5 11,5 11, ,5 ØR f 1,6 1,6 1,6 1,6 1,6 nxød 4x16 4x16 4x16 4x16 4x16 ØK 60,3 69,8 79,4 88,9 98,4 BS 2,3 3,2 4,2 6,4 7,5 DIN 2,7 3,5 4,4 6,6 8,5 *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied
8 Halar coated valves with flanged ends TO EN PN10 TO ASA150#* DN BS DIN H (open) H1 (close) a Ø230 Ø265 Ø320 ØW ØD C ØR f nxød 4x18 4x18 8x18 8x18 8x18 8x22 ØK ØD C 16 17,5 19, ,5 ØR f 1,6 1,6 1,6 1,6 1,6 1,6 nxød 4x19 4x19 4x19 8x19 8x22 8x22 ØK 120,6 139,7 152,4 190,5 215,9 241,3 BS DIN 12, *Unless specific agreement with COMEVA, valves with flanges 150# will be usually supplied 235
Weir Type Diaphragm Valves - DIAVAL SERIES W
when necessary. Valves close by turning the handwheel clockwise. Valves are bolted bonnet, seatless design, with a diaphragm as closure element, with rising handwheel. Valves are offered with a broad range
More informationDiaphragm Valves. Product information
Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade
More informationTechnical Manual. Register 8 CONTENTS - ARV2
Page: 1 Register 8 CONTENTS - ARV2 Contents Page Technical Data ARV2-DIN... 2 Technical Data ARV2-ANSI... 3 Material Specification ARV2... 4 Dimensions ARV2-DIN... 5 Dimensions ARV2-ANSI... 6 Spare Parts
More informationTechnical Manual. Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing)
Page: 1 Contents Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing) Page Technical Data ARV2-TAT-DIN...2 Technical Data ARV2-TAT-ANSI...3 Material Specification ARV2-TAT...4 Dimensions ARV2-TAT-DIN...5
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationTechnical Manual. Register 25 CONTENTS - AKH2-TAT
D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data
More informationTechnical Manual. Register 10 CONTENTS - ASG
Page: 1 Contents Register 10 CONTENTS - ASG Page Technical Data ASG-DIN...2 Technical Data ASG-ANSI...3 Material Specification ASG...4 Dimensions ASG-DIN...5 Dimensions ASG-ANSI...6 Spare Parts ASG...7
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationFull Bore Diaphragm Valve, Metal
Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable
More informationType / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
More informationTechnical Manual. Register 18 Contents - T4E
Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5
More informationDIAPHRAGM VALVES b y H a k o h a v V a l v e s
b y H a k o h a v V a l v e s DIAPHRAGM VALVES by Hakohav Valves ABOUT US QUALITY RELIABILITY Kim Valves started up as Hakohav Valves in 1963 by two young visionary engineers who set their goal to become
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationDual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
More informationCatalogues. Reliable Flow Control Solutions. Valve & Automation Systems. A210 New Generation Pneumatic Actuators
Catalogues 2013 Reliable Flow Control Solutions V101 / V102 DN50-1200 Actuator Op. Butterfly Valves V101 (Wafer) V102 (Lug) DN25-1200 Butterfly Valves A210 New Generation Pneumatic Actuators A250 Mechanical
More informationPRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
More informationOther Information. Section 6. Contained in this section: Actuator Diaphragm Identification. How To Order. Facts and Recommended Guidelines
Section 6 Other Information Contained in this section: How To Order Maintenance Instructions Flange Gasket and Storage Recommendations Actuator Diaphragm Identification Facts and Recommended Guidelines
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationTechnical Manual. Register 2 CONTENTS - AKH2
Page: 1 Contents Register 2 CONTENTS - AKH2 Page Technical Data AKH2-DIN...2 Technical Data AKH2-ANSI...3 Material Specification AKH2...4 Dimensions AKH2-DIN...5 Dimensions AKH2-ANSI...6 Spare Parts AKH2
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationDifferential pressure relief controller AFPA / VFG 2 (VFG 21)
Differential pressure relief controller AFPA / VFG 2 (VFG 21) Description AFPA VFG2 (VFG 21) is a self-acting differential pressure relief controller primarily for use in district heating systems. The
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description / Application AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller closes
More informationFlow Control and Differential Pressure Controller AFPQ / VFQ 2(21) - Installation in return line AFPQ 4 / VFQ 2(21) - Installation in flow line
Flow Control and Differential Pressure Controller AFPQ / VFQ 2(21) - Installation in return line AFPQ 4 / VFQ 2(21) - Installation in flow line Description / Application AFPQ VFQ AFPQ 4 VFQ The controller
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
More informationBS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
More informationARMATUREN TYPE ISO-STANDARD A. Plug valve with chemical-resistant vacuum-proof lining DN / PN NPS ½ - 12 / class
TYPE ISO-STNDRD Plug valve with chemical-resistant vacuum-proof lining DN 15-300 / PN 10-40 NPS ½ - 12 / class 150-300 RMTUREN free of cavity & maintenance 2.1 free of cavities Maintenance free and self
More informationBUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationTechnical Manual. Register 12 CONTENTS - AKH2.2
Page: 1 Contents Register 12 CONTENTS - AKH2.2 Page Technical Data AKH2.2-DIN... 2 Technical Data AKH2.2-ANSI... 3 Material Specification AKH2.2... 4 Dimensions AKH2.2-DIN... 5 Dimensions AKH2.2-ANSI...
More informationDiaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller closes
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationPressure reduction controller AFD / VFG 2, VFG 21, VFGS 2
Data sheet Pressure reduction controller AFD / VFG 2, VFG 21, VFGS 2 Description The controller is a self-acting pressure reducer primarily for use in district heating systems. The control closes on rising
More informationPressure reduction controller AFD / VFG 2, VFG 21, VFGS 2
Data sheet Pressure reduction controller AFD / VFG 2, VFG 21, VFGS 2 Description The controller is a self-acting pressure reducer primarily for use in district heating systems. The control closes on rising
More informationTilting-disc Check Valves Short Body
Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40
More informationUniwat. Resilient Seated Gate Valves
Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01
More informationARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationSIGEVAL BUTTERFLY VALVES EXPORTING PRICE LIST Certification ISO Ed UNE-EN-ISO 9001
SIGEVAL BUTTERFLY VALVES 0 0 6 2 Certification ISO-9001 EXPORTING Ed.00-11 BUTTERFLY VALVE TYPE FL(w) Handlever FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 Body: Wafer
More informationDifferential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1)
Data sheet Differential pressure relief controller (, 25, 40) AFPA / VFG 2() Description The controller has a control valve, an actuator with one control diaphragm and spring for differential pressure
More informationBI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
More informationThese PFA and PTFE lined products offer a reliable solution in hazardous applications
These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate
More informationPneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
More informationAtostar. For Clean Production And A Clean Environment. FCD ATETB (Bulletin VA-11 [E/A4]) Quality System Certificate
Atostar S T A I N L E S S S T E E L, F L U O R C O P O L Y M E R L I N E D B A L L V A L V E S A S M E D I N J I S For Clean Production And A Clean Environment Quality System Certificate FCD ATETB0011-00
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationType 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel
Type 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel Application Hand-operated actuator or side-mounted handwheel for mounting on control valves, especially Series 240, 250, 260 ), 280 and
More informationPressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
More informationManual valves. automatic meters and valves
Manual valves automatic meters and valves Butterfly valves manual valves Advanced technical design 1. Robust and lightweight leverage system. Ergonomic design. Protection of gear mechanism.. Flange fitting
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationUNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
More informationKDV - Kim Diaphragm Valves Straight Through Type (ST) Straight Through Type ST. Diaphragm Valves. 1
KDV - Kim Diaphragm Valves Straight Through Type (ST) Straight Through Type ST Diaphragm Valves 1 KDV: A Passion for Perfection KDV established in Australia in 1979, specialises in the manufacture and
More informationBR 11e Centric Control and Shut-off Butterfly Valve
BR 11e Centric Control and Shut-off Butterfly Valve Application: Tight-closing, centric control and shut-off butterfl y control valve with EPDM lining. Suitable for solids, liquids and gases: Valve sizes
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationwith electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationButterfly Valve, Metal
utterfly Valve, Metal Construction GEMÜ type D480 is a butterfly valve with various versions. It is available in nominal sizes DN 25 1600, various body versions (Wafer, Lug and U section) and in a large
More informationARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More informationExcess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
More informationDIAPHRAGM CONTROL VALVE
CONTROL VALVE INTRODUCTION The Diaphragm Valve is essentially a simple pinch clamp, closed by pressing a flexible diaphragm against transverse weir, when fully closed, the diaphragm seats against the weir
More informationCHECK VALVES. MOUNTING: - flow direction marked with arrow on body; - mounting position in conformity with the technical sheet recommendation.
CHECK VALVES RR page 1 R MAIN APPLICATIONS: Transport and distribution of : - cold and hot industrial water; - saturated vapours; - petroleum products; on condition that the compatibility regarding the
More informationSwing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More informationARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationHawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
More informationSoft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
More informationUNIDIRECTIONAL WAFER Knife Gate Valve
03/01/2011 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationCATALOG. Metal Diaphragm Valves for industrial applications SMART IN FLOW CONTROL.
CATALOG Metal Diaphragm Valves for industrial applications SMART IN FLOW CONTROL. 2 www.sed-flowcontrol.com TABLE OF CONTENTS Introduction 04 Company 04 Production and Quality 05 Applications 06 Overview
More informationwith electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
More informationBFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationKDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT. Diaphragm Valves. 1
KDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT Diaphragm Valves www.kdvflow.com 1 KDV: A Passion for Perfection The KDV Advantage KDV established in Australia in 1979, specialises in the manufacture
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationBUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationVACOMASS. Technical information VACOMASS control valve. Version Diaphragm control valve with central or falling flow axis
VACOMASS Technical information Diaphragm control valve with central or falling flow axis Version 2012-02 DESCRIPTION OF CONSTRUCTION AND FUNCTION SPECIAL CHARACTERISTICS: Universal use: The slidegate valve
More informationKDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT. Diaphragm Valves. 1
KDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT Diaphragm Valves 1 KDV: A Passion for Perfection KDV established in Australia in 1979, specialises in the manufacture and distribution of a wide range
More informationBI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationButterfly valve with electrical actuator VFY-WA
Butterfly valve with electrical actuator Description Position indicator Torque limiter Complete installation from factory - ready for installation Features: Spline driven one piece shaft connected to spherically
More informationButterfly valve with electrical actuator VFY-WA
Butterfly valve with electrical actuator Description Position indicator Torque limiter Complete installation from factory - ready for installation Features: Spline driven one piece shaft connected to spherically
More informationMotorized Butterfly Valve Actuated Wafer type butterfly valves
Motorized Butterfly Valve Actuated Wafer type butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600) For On-Off or Modulating Control Manual override non-clutch design. Manual operation can
More informationSheeting 174. Natural 176. Neoprene 178. Nitrile 179 EPDM 181. Silicone 182. Viton 184. Miscellaneous 185
Sheeting 174 Natural 176 Neoprene 178 Nitrile 179 EPDM 181 Silicone 182 Viton 184 Miscellaneous 185 172 51 Sparks Ave 173 51 Sparks Ave SHEETING Complete Rubber offers a comprehensive range of industrial
More information