Hydraulic Filtration & Contamination Control Products. Brochure: FDHB200UK (Medium Pressure Section)

Transcription

1 Hydraulic Filtration & Contamination Control Products Brochure: FDHB2UK (Medium Pressure ection)

2 Consistent quality Technical innovation Premier customer service Hydraulic, Lubrication & Coolant Filtration Highperformance filtration systems for production machinery in industrial, mobile and military/marine applications. Parkers technical resources provide the correct filtration technologies that conform to your requirements. That s why thousands of manufacturers and equipment users around the world rely on Parker Filtration products and people. Worldwide ales and ervice Parker Filtration s global reputation as a reliable supplier of superior filtration products is the result of a focused and integrated development and manufacturing system. Parker Filtration consolidates quality filtration products, manufactured by process filtration, air and gas filtration and separation, fuel conditioning and filtration, hydraulic and lubrication filtration, fluid power products and fluid condition monitoring equipment into one broadbased range that covers many markets and most applications, as detailed here. Compressed Air & Gas Filtration Complete line of compressed air/gas filtration products; coalescing, particulate and adsorption filters in many applications in many industries. Process & Chemical Fluid Filtration Liquid filtration systems for beverage, chemical and food processing; cosmetic, paint, water treatment; photoprocessing; and microchip fabrication. Racor Fuel Conditioning & Filtration Parker air, fuel and oil filtration systems provide quality protection for engines operating in any environment, anywhere in the world. Photo courtesy of GLABAU HAHN. ystem Contamination Monitoring Online dynamic particle analysis, offline bottle sampling and fluid analysis and measurement of water content polluting the oil in a system. All important and achievable, costeffective solutions available to equipment manufacturers and end users alike. Parker Hannifin Filter Division Europe FDHB2UK.

3 /4/8CN eries MAX 6 I/min 7 bar FEATURING 8 Medium pressure filters

4 /4/8CN eries Features & Benefits Features 6 bar fatigue rating (eight times that of a spinon) Diametral (side) seal between head and bowl Dust seal 4CN2 meets automotive HF3 standard CN meets automotive HF2 standard Cast aluminium head Reinforced Microglass III replacement elements Complete performance data disclosure, electrical or electronic indicators available Coreless Ecoglass III replacement elements Advantages Ability to provide reliable service under tough cyclic operating conditions Can be utilised in applications where high pressure filters may have been only option Proven reliability in cyclic applications Reduced importance of bowl torque Prevents contamination from building up on bowl/head threads Automotive industry acceptance Low profile, lightweight and durable Multilayered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent All pertinent information is provided in an easytocompare format Check element condition at a glance Right style for the application No metal content in element Reduced overall weight of % Easy compaction of used elements Conversion kits available: new bowl with permanent core Benefits Reduced downtime due to premature filter failures Reduced costs, better fit for the application No downtime, no leaks Performs with real world service Easier service, eliminates thread galling atisfies specifications without need for further testing and/or approval Less weight, smaller envelop and cleaner appearance Great performance value Reliable performance throughout element life Reduces downtime, maximises element life No hidden deficiencies Easy selection of proper filtration Optimise element life, prevent bypassing Matches your system electrical connections Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal cost Retrofit coreless design to housings already installed Typical Applications Compressor lube oil Offline filter loops Machine tools (Automotive standard) Hydrostatic drive charge pumps Mobile equipment Pilot lines for servo controls Oil patch drilling equipment Injection moulding The Parker Filtration /4/8CN eries Medium Pressure Filters. This partial list of applications for Parker CN eries Filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the CN filter, applications such as those listed were restricted by limitations of a spinon can, or forced into the highercost range of high pressure filters. The CN eries fills this gap and is now available with environmentally friendly Ecoglass III elements. 82 Parker Hannifin Filter Division Europe FDHB2UK. ection

5 pecification Pressure ratings: Maximum allowable operating pressure: Rated fatigue pressure: 7 bar 6 bar Connections: everal threaded port options available, flange faced ports available on 8CN. Connection style Model CN 4CN 8CN BPF(G), 3 /4 /4, /2 /2, 2 AE 2, 6 6, 24 24, 32 IO 649 M27 M33 M42, M48 Metric 3M 2 Filter housing: Head material aluminium. Bowl material hard anodized aluminium. eal material: or fluoroelastomer. Operating temperature range: 2 C to + C. Bypass valve & indicator settings: Table following gives bypass valve and corresponding indicator setting. Bypass Indicator.7 bar.2 bar 2. bar Filtration element: Degree of filtration: Determined by Multipasstest according to IO 6889, see Box 3 in the product configurator. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (IO 3724). Microglass III (available by request) upported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating 2 bar (IO 294). Ecoglass III upported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (IO 294). Filter element can only be used together with bowl including Ecoadaptor. Note: Ecoglass III contributes to IO 4 quality. Indicator options: visual M3. electrical T. electronic F(PNP). electronic F2(NPN). For indicator details see catalogue section 6. Weights (kg): Model CN..6 4CN CN Fluid compatibility: uitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. CN H I N 4CN H J N 8CN H J N F G L K F G L K G L K F J I I M D M D M D C C C A B P A B P A B P Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E AE 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E AE 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E AE 4 Drain plug Dimensions in mm (inch) Model A B C D E F G H I J K L M* N P CN 4CN 8CN 6.6 (6.7) 7.8 (6.73) 28.9 (.6) 2.7 (9.87) (.33) 4.6 (.8) 46. (.83) 62. (2.44) 77.7 (3.6) 2.4 (.9) 32.6 (.28) 49. (.9) 7. (2.8) 7.2 (4.22) 24.8 (4.9) 8.9 (3.38) 27. (.) 8.7 (6.2) 73.2 (2.88). (4.37) 82.6 (3.2) 82.6 (3.2) (4.8).4 (.96) 38. (.) 62. (2.44).6 (4.) 2 (.9) 3.8 (.2) 4. (.62) 4 (.69) 8.8 (2.32) 79.4 (3.2) 36.6 (.44) 6.2 (2.37) 4.3 (.63) xM6.x7.9 deep 4xM8.2x3 deep 4xM8.2x6 deep 227 Nm 768 Nm 89 Nm Note: add 4mm for T and F indicators 83 Medium pressure filters

6 /4/8CN eries 8CN Flange Face Details (AE 2 3M) Flange face mounting holes M2.7 x 22 deep Pressure Drop Curves With.7 bar bypass the recommended initial pressure drop is max. bar. With bypass the recommended initial pressure drop is max. bar. If the medium used has a viscosity different from 3 ct, pressure drop over the filter can be estimated as follows: The total p = housing ph + (element pe x working viscosity/3). CN Elements CN Empty Housing QE QE QE QE /4 Nominal Port ize Nominal Port ize 8 CN2 Elements QE 2.. QE QE 2QE Parker Hannifin Filter Division Europe FDHB2UK. ection

7 Pressure Drop Curves 4CN Elements 4CN Empty Housing QE QE. QE Nominal Port ize.. 2QE. /2 Nominal Port ize CN2 Elements QE 2. QE. QE. 2QE CN Elements 8CN Empty Housing QE QE QE. 2QE /2 Nominal Port ize 2 Nominal Port ize CN2 Elements QE QE. QE 2QE Medium pressure filters

8 /4/8CN eries Element ervice A. top the system s power unit. B. Relieve any system pressure in the filter line. C. Drain the filter bowl if drain port option is provided. D. Loosen and remove bowl. E. Remove element by pulling downward with a slight twisting motion and discard. F. Check bowl oring and antiextrusion ring for damage and replace if necessary. G. Lubricate element oring with system fluid and place on post in filter head. H. Install bowl by rotating counter clockwise and tighten to specified torque. CN 227 Nm (2ft. lbs) 4CN 768 Nm (42ft. lbs) 8CN 89 Nm (67ft. lbs) I. Confirm there are no leaks after powering the system. 3 2 CN Filters Parts List Index Description Head Indicators M3visual auto reset:.2 bar M3visual auto reset: 2. bar Telectrical:.2 bar c/w DIN 436 connector Telectrical: 2. bar c/w DIN 436 connector Felectronic PNP with 4 LEDs:.2 bar Felectronic PNP with 4 LEDs: 2. bar F2electronic NPN with 4 LEDs:.2 bar F2electronic NPN with 4 LEDs: 2. bar Bypass valve.7 bar assembly assembly Element (see replacement element part numbers) Bowl ingle length with drain ingle length with reusable core and drain ingle length without drain Double length with drain Double length with reusable core and drain Double length without drain Bowl and dust seal Drain plug: AE Parker Hannifin Filter Division Europe FDHB2UK. ection

9 Ordering Information tandard products table Part numbers CNQEVTKG64 CNQEVM3KG64 CN2QEVTKG64 CN2QEVM3KG64 CN2QEVTKG64 CN2QEVM3KG64 CN22QEVTKG64 CN22QEVM3KG64 4CNQEVTKG244 4CNQEVM3KG244 4CNQEVTKG244 4CNQEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN22QEVTKG244 4CN22QEVM3KG244 8CNQEVTKG324 8CNQEVM3KG324 8CN2QEVTKG324 8CN2QEVM3KG324 8CN2QEVTKG324 8CN2QEVM3KG324 8CN22QEVTKG324 8CN22QEVM3KG324 upercedes F3CNRQETW3C2C29 F3CNRQEM2C2C29 F3CNR2QETW3C2C29 F3CNR2QEM2C2C29 F3CN2RQETW3C2C29 F3CN2RQEM2C2C29 F3CN2R2QETW3C2C29 F3CN2R2QEM2C2C29 F34CNRQETW3E2E29 F34CNRQEM2E2E29 F34CNRQETW3E2E29 F34CNRQEM2E2E29 F34CNR2QETW3E2E29 F34CNR2QEM2E2E29 F34CN2RQETW3E2E29 F34CN2RQEM2E2E29 F34CN2RQETW3E2E29 F34CN2RQEM2E2E29 F34CN2R2QETW3E2E29 F34CN2R2QEM2E2E29 F38CNRQETW3F2F29 F38CNRQEM2F2F29 F38CNR2QETW3F2F29 F38CNR2QEM2F2F29 F38CN2RQETW3F2F29 F38CN2RQEM2F2F29 F38CN2R2QETW3F2F29 F38CN2R2QEM2F2F29 Flow (l/min) Model number CN CN CN CN CN CN CN CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN Element length Media rating (µ) Note: Filter assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above eals Indicator Bypass settings Ports G" G" G" G" G" G" G" G" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G2" G2" G2" G2" G2" G2" G2" G2" Replacement elements 9367Q 9367Q 9367Q 9367Q 93674Q 93674Q 9367Q 9367Q 93677Q 93677Q 93678Q 93678Q 93679Q 93679Q 9367Q 9367Q 9366Q 9366Q 93672Q 93672Q 93662Q 93662Q 9367Q 9367Q 93678Q 93678Q 93679Q 93679Q 87 Medium pressure filters

10 /4/8CN eries Ordering Information (cont.) Product Configurator Box Box 2 4CN 2 Box 3 QE Box 4 V Box M3 Box 6 K Box 7 G24 Box 8 4 Box Model mall size MP filter, Tport Medium size MP filter, Tport Large size MP filter, Tport CN 4CN 8CN Box 2 Length Filter type 2 Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: tandard items are in stock, semi standard items are available within four weeks Box 3 Element media Ecoglass III element Degree of filtration Glass fibre 2µ media 2QE µ media QE µ media QE Note: When using Ecoglass III elements a bowl with reusable Ecoadaptor is required. Filter assemblies with Microglass III elements are available by request 2µ media 2QE Box 4 eal material eal type V B Box No indicator port indicator indicator Plugged with steel plug Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Electronic 4 LED, PNP, N.C. Electronic 4 LED, NPN, N.C. Box 8 Options Options tandard drain port on bowl Indicator 4 N M3 T P F F2 F3 F4 Box 6 Bypass valve.7 bar Bypass valve Indicator.2 bar 2. bar G K When filter includes a bypass valve but not an indicator, code denotes bypass setting. Box 7 Ports CN:Thread G 3 /4 Thread G Thread AE 2 Thread AE 6 Thread M27, IO649 4CN:Thread G /4 Thread G /2 Thread AE 6 Thread AE 24 Thread M33, IO649 8CN:Thread G /2 Thread G2 Thread AE 24 Thread AE 32 Thread M42, IO649 Thread M48, IO649 AE flange 2" 3M Filter connection G2 G6 2 6 M27 G2 G M33 G24 G M42 M48 R32 Ecoglass III elements ( seals) Model CN CN2 4CN 4CN2 8CN 8CN2 2QE Q 93672Q 93676Q 9367Q 93673Q 93676Q QE Q 93673Q 93677Q 9367Q 93674Q 93677Q QE 9367Q 93674Q 93678Q 9366Q 93662Q 93678Q Conversion bowl assembly (to retrofit existing CN filter housings to use coreless elements) CN coreless element bowl assembly CN2 coreless element bowl assembly CN coreless element bowl assembly CN2 coreless element bowl assembly CN coreless element bowl assembly CN2 coreless element bowl assembly 2QE 9367Q 9367Q 93679Q 93672Q 9367Q 93679Q Model CN 4CN 8CN Model CN CN2 4CN 4CN2 8CN 8CN2 Elements with nitrile seals 2Q 92893Q 92893Q Q Q 93266Q Q eal kits Q G44Q G469Q G448Q G467Q 93267Q Q * Replacement element part numbers for conventional assemblies Q Q 92892Q 92683Q Q 93268Q Q 2Q 93367Q 93368Q 9399Q 938Q Q Q Elements with seals Model CN CN2 4CN 4CN2 8CN 8CN2 2Q 9326Q 93266Q 92676Q 92677Q 93269Q 93266Q Q G489Q G49Q G49Q G492Q 93266Q Q Q 93262Q 93268Q Q Q 83266Q Q 2Q 93369Q 9337Q 93Q 939Q 92993Q Q ßx(c)=2.% 6 Average filtration beta ratio ß (IO 6889) / particle size µm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 6 Degree of filtration 98.7% % % 6 2 Please note the bolded options reflect standard options with a reduced leadtime of (4) weeks or less. Consult Parker Filtration on all other leadtime options. 99.9% Metal free Ecoglass III 2QE QE QE 2QE Nominal flow (l/min) for filter assembly at viscosity 3ct Housing, port size CN, G CN2, G 4CN, G /2 4CN2, G /2 8CN, G2 8CN2, G2 2QE QE QE QE * s are available under various registered trademarks, including Viton (a registered trademark of DuPont) and Fluorel (a registered trademark of 3M) 88 Parker Hannifin Filter Division Europe FDHB2UK. ection

11 4M/4M Eco eries MAX 26 I/min 4 bar FEATURING 89 Medium pressure filters

12 4M/4M Eco eries Features & Benefits Features Cast iron head, steel bowl Reinforced Microglass III replacement elements, electrical or electronic indicators available Test points in the filter head Coreless Ecoglass III replacement elements Advantages Can be used in applications where aluminium is not allowed Rugged construction Multilayered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent Check element condition at glance Right style for the application Pressure measurement and p possible No metal content in element Reduced overall weight of % Easy compaction of used elements Eco adaptors available Benefits Approved for engine rooms and mines Reliable filtration in all conditions Great performance value Reliable performance throughout element life Reduces downtime, maximises element life Optimise element life, prevent bypassing Matches your system electrical connections Quick testing and maintenance Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal costs Retrofit coreless design to housings already installed Typical Applications Industrial power units Mobile construction equipment Forestry equipment The Parker Filtration 4M/4 Eco eries Medium Pressure Filters. The 4M/4 Eco eries of medium pressure filters offer an ideal solution to the problem of protecting system components at lower pressures. These filters are a realistic, high quality alternative to low specification spinon filters. The 4M/4 Eco eries offers high dirt holding capacity, 4 bar capability and rapid element replacement. 9 Parker Hannifin Filter Division Europe FDHB2UK. ection

13 pecification Pressure ratings: Maximum allowable operating pressure 4 bar. Filter housing pressure pulse fatigue tested: 6 pulses 4 bar. Connections: Threads G, G /4 (IO 228/) or flange AE /2 3M. Filter housing: Head material cast iron (GI). Bowl material steel. eal material: or. Operating temperature range: 2 to + C Bypass valve: Opening pressure. Filtration element: Degree of filtration: Determined by Multipasstest according to IO 6889, see Box 3 in the product configurator. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (IO 3724). Microglass III: upported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating 2 bar (IO 294). Ecoglass III: upported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (IO 294). Filter element can only be used together with reusable FEA Ecoadapter. Note: Ecoglass III contributes to IO 4 quality. Indicator options: Indicating differential pressure: 2. ±.2 bar. visual M3. electrical T. electronic F(PNP). electronic F2(NPN). For indicator details see catalogue section 6. Fluid compatibility: uitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. Installation Details Plug M2x. Type A B C Weight (kg) D 6 (4.7) 237 (9.33) 92 (7.6).9 28 (8.2) 33 (3.) 28 (.22) 329 (3.) 4 (7.72) 4 (.94) G, G /4, G /2, Flange AE /2 3M D D Length (6.8) (2.6) (9.9) 7. 4 pcs M2 depth 8 only model AE 69.8 (2.7) A 38 (.) 3.7 (.4) min (2.) B C mm (inches) M depth 2 32 (.2) 7 (2.7) 66 ( ) min (2.) 39 ( ) 8 (2.28) 9 Medium pressure filters

14 4M/4M Eco eries Pressure Drop Curves The recommended level of the initial pressure drop is max. bar. If the medium used has a viscosity different from 3 ct, pressure drop over the filter can be estimated as follows: The total p = housing ph + (element pe x working viscosity/3). 4M eries Empty Housing G6 G2 G24 R M Element with Microglass III 4M2 Element with Microglass III Q.2 Q Q 2Q Q Q Q 2Q M3 Element with Microglass III 4M4 Element with Microglass III Q Q 2Q Q Q Q Q 2Q Parker Hannifin Filter Division Europe FDHB2UK. ection

15 4M Element with Ecoglass III 4M2 Element with Ecoglass III QE QE 2QE QE QE QE QE QE M3 Element with Ecoglass III 4M4 Elements with Ecoglass III QE QE QE QE QE QE QE QE Ordering Information tandard products table Product numbers 4MQBPKG6 4M2QBPKG6 4MQEBPKG6 4M2QEBPKG6 4M2QBPKG2 4M22QBPKG2 4M2QEBPKG2 4M22QEBPKG2 4M3QBPKG24 4M32QBPKG24 4M3QEBPKG24 4M32QEBPKG24 upercedes FF4.Q.B3.GT6 FF4.Q2.B3.GT6 FF4.QE.B3.GT6 FF4.QE2.B3.GT6 FF46.Q.B3.GT2 FF46.Q2.B3.GT2 FF46.QE.B3.GT2 FF46.QE2.B3.GT2 FF47.Q.B3.GT24 FF47.Q2.B3.GT24 FF47.QE.B3.GT24 FF47.QE2.B3.GT24 Flow (l/min) Model number 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M Element length Media rating (µ) Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability eals Indicator Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Bypass settings Ports G" G" G" G" G /4" G /4" G /4" G /4" G /2" G /2" G /2" G /2" Replacement elements Q Q Q Q Q Q Q Q 93897Q 93897Q Q Q upercedes FC7.Q.BK FC7.Q2.BK FC7.QE.BK FC7.QE2.BK FC76.Q.BK FC76.Q2.BK FC76.QE.BK FC76.QE2.BK FC77.Q.BK FC77.Q2.BK FC77.QE.BK FC77.QE2.BK 93 Medium pressure filters

16 4M/4M Eco eries Ordering Information (cont.) Product configurator Box Box 2 4M 2 Box 3 Q Box 4 B Box M3 Box 6 K Box 7 G2 Box 8 Box Box 2 Length Length 4 Filter type Model Medium pressure filter, Tport Box 3 4M Element media Microglass III element Ecoglass III element Degree of filtration Glass fibre 2µ media 2Q 2QE Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: tandard items are in stock, semi standard items are available within four weeks µ media Q QE µ media Q QE Note: When using Ecoglass III elements a bowl with reusable Ecoadaptor is required. Filter assemblies with Microglass III elements are available by request 2µ media 2Q 2QE Box 4 eal material eal type B V Box Plugged with steel plug indicator indicator Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Electronic 4 LED, PNP, N.C. Electronic 4 LED, NPN, N.C. Indicator P M3 T F F2 F3 F4 Box 6 Bypass valve No bypass* No bypass* Bypass valve Indicator 2. bar 7. bar No indicator (P) K N X * High collapse element must be used if MAOP is higher than element collapse pressure. When filter includes a bypass valve but not an indicator, code denotes bypass setting. + Box 8: code 2 + Box 8: code 2 Box 7 Connections Thread G Thread G /4 Thread G /2 AE flange /2" 3M G6 G2 G24 R24 Availability: = standard product x = nonstandard, ask for availability Filter connection x x x x Length 4 x x Box 8 Options tandard No bypass Options 2 Media 2Q Q Q 2Q 2QE QE QE 2QE Replacement elements with nitrile seals 93896Q 93896Q Q Q Q Q Q Q Q 93896Q Q Q 93898Q 93898Q Q Q Q Q 93897Q 93897Q Q 93898Q Q Q Length Q Q Q 93897Q Q Q 93899Q 93899Q Nominal flow (I/min) at viscosity 3 ct connection size Filter length Length 4 Media 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE G G G24 & R ßx(c)=2.% 6 Degree of filtration Average filtration beta ratio ß (IO 6889) / particle size µm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% % % % % Disposable Microglass III 2Q Q Q 2Q Metal free Ecoglass III 2QE QE QE 2QE Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. 94 Parker Hannifin Filter Division Europe FDHB2UK. ection

17 3 Eco eries MAX I/min 3 bar FEATURING 9 Medium pressure filters

18 3 Eco eries Features & Benefits Features Modular filter system Duplex type systems with selecting valve Bypass assembly in the filter cover Large filtration area Air bleed valve Two indicator locations, visual indicator as standard Coreless Ecoglass III replacement elements Advantages izing and performance can be optimised Element change during operation ediment and other particles at the bottom are away from the flow entering the system High dirt holding capacity Easy air removal after element change Easy to detect when element replacement needed No metal content in element Reduced overall weight of % Easy compaction of used elements Conversion kits available: new bowl with permanent core Benefits Best filter for every lube application Continuous filtration No contamination passing into the system if filter in bypass Long element life Protects bearings and other sensitive components Reliable filtration Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal costs Retrofit coreless design to housings already installed Typical Applications Paper production plants teel mills Aluminium mills Industrial power packs Lubrication systems Power generation The Parker Filtration 3 Eco eries Medium Pressure Filters. These high flow return filters are ideal for industrial applications on hydraulic or lubrication systems with pressures up to 3 bar and flows up to l/min in single units. Multiple filter systems with pressures up to 6 bar and flows up to 4 l/min. The ability to bank multiple filters together in a duplex format enables continuous filtration during element changes. 96 Parker Hannifin Filter Division Europe FDHB2UK. ection 2

19 pecification Pressure ratings: Maximum allowable operating pressure: ingle filters 3 bar. Filter systems 6 bar. Filter housing pressure pulse fatigue tested: 6 pulses 2 bar. Construction: Ecoelement does not include any metal parts and is supported by Ecoadaptor. Conventional elements can be used without removing the Ecoadaptor. Connections: ingle unit connections: Flanges AE 2 3M, AE 2 /2 3M or with adaptor threads G /2 or G2. Dual unit connections: Flanges AE 3 3M or with adaptor threads G /2 or G2. Parallel unit and filter system assembly connections: DN8/PN6 or DN/PN6. Assembly of two, four six or eight filters to the same system by using Lbore valve assembly (only one side in use). Filter housing: Material aluminium. eal material: or. Operating temperature range: 2 C to + C. Bypass valve: Opening pressure. Filter element: Degree of filtration: Determined by Multipasstest according to IO 6889, see Box 3 in the product configurator. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (IO 3724). Ecoglass III: upported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (IO 294). Filter element can only be used together with reusable FEA Ecoadapter. Note: Ecoglass III contributes to IO 4 quality. Also available with Microglass III elements. Contact Parker Filtration for details. indicator: Includes M3, full part number FMUM3KVMU2H as standard. Optional Indicators (mounted to lower indicator port): electrical T. electronic F(PNP). electronic F2(NPN). For indicator details see catalogue section 6. Fluid compatibility: uitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. Installation Details ingle Assemblies 3M Body flange Adaptor flange Connection options AE 2 3M AE 2 /2 3M G /2 G2 AE 3 3M (9 elbow) M2 8pcs G /2x2pcs G /8 Venting valve M2 4pcs Direction A Torque Nm Ø96 Indicator FPC V Weights (kg) ingle Dual D2 Parallel P2 ystem 2 ystem 9 ystem 6 ystem =6 =2 Dimensions in mm G /2 42 Indicator port A 63 Adaptor flange 27 In M2 4pcs Torque Nm Adaptor flange 28 Torque Nm OUT Option. can be rotated in 9 steps. 97 Medium pressure filters

20 3 Eco eries Dual ystem 3D G /2 x 2pcs G /8 Venting valve A 97. Out In Out 9 27 In AE 3 flange AE 3 flange 9 Thread flange 3 Thread flange 3 Parallel ystem 3N Ø upported from base Connection options Body flange Adaptor flange thread AE 3 3M G /2 G2 G /2x2pcs G /8 Venting valve Type Dimensions in mm A Out A 63 In In Out 9 29 Port izes DN8/PN6 or DN/PN Ø upported from base 98 Parker Hannifin Filter Division Europe FDHB2UK. ection 2

21 3 ystem + units 3 ystem 2+2 units Indicator FPC V Indicator FPC V Drain valve G /2x2pcs 4 4 Drain valve G /2x2pcs ystem 3+3 units 3 ystem 4+4 units Indicator FPC V Indicator FPC V Drain valve G /2x2pcs Medium pressure filters

22 3 Eco eries Valve Assembly Connection TModel G /2x2pcs G /8 Venting valve Type Dimensions in mm A Out low fill valve A Out In Indicator port 9 Ø4 393/ /3 In Valve supported from base Port sizes DN8/PN6 or DN/PN6 LModel CModel G /2x2pcs G /8 Venting valve G /2x2pcs G /8 Venting valve Handle turns counter clockwise A In A Out 366/376 In 9 9 Ø4 Out 24 Indicator port 4 78 Ø4 393/ /3 4 49/ 293/33 Valve supported from base Valve supported from base Parker Hannifin Filter Division Europe FDHB2UK. ection 2

23 Pressure Drop Curves The recommended level of the initial pressure drop is max.8 bar. If the medium used has a viscosity different from 3 ct, pressure drop over the filter can be estimated as follows: The total p = housing ph + (element pe x working viscosity/3). 3M Eco ingle Empty Housing 3 Eco ystem Empty Housing G G32 R Elements 2QE Elements QE Elements QE 3 Elements 2QE p (psid) Ordering Information tandard products table Part numbers 3M2QEBM3KR4 3M22QEBM3KR4 3M3QEBM3KR4 3M32QEBM3KR4 upercedes FF32.QE.BA3.L4 FF32.QE2.BA3.L4 FF33.QE.BA3.L4 FF33.QE2.BA3.L4 Flow (l/min) Model number 3M 3M 3M 3M Element length Media rating (µ) Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. 2 2 eals Indicator Bypass settings Ports AE flange 2 /2" 3M AE flange 2 /2" 3M AE flange 2 /2" 3M AE flange 2 /2" 3M Replacement elements Q Q Q Q upercedes FC32.QE.BK FC32.QE2.BK FC33.QE.BK FC33.QE2.BK Medium pressure filters

24 3 Eco eries Ordering Information (cont.) Product configurator Configurator example, single unit: Box Box 2 Box 3 3M 3 QE Box 4 B Box M3 Box 6 K Box 7 R4 Box 8 Configurator example, 2+2 system: Box 3 Box 2 3 Box 3 QE Box 4 B Box M3 Box 6 K Box 7 D Box 8 4 Box Model ingle unit Dual unit Parallel unit ystem 3M 3D 3N 3 Box 2 Length Filter type 2* 3 * = This option is semi standard on single units (3M) only Box 3 Element media Ecoglass III element Degree of filtration Glass fibre 2µ media 2QE* µ media QE * = This option is semi standard on single units (3M) only Filter assemblies with Microglass III elements are available by request µ media QE 2µ media 2QE Box 4 eal material Box 7 eal type Connections Thread G /2 Thread G2 AE flange 2" 3M AE flange 2 /2" 3M AE flange 3" 3M DN8 flange DN flange B V G24 G32 R32 R4 R48 D8 D Availability: = standard product x = nonstandard, ask for availability = not available Box indicator indicator Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Filter connection 3M x 3D x x Indicator 3N 3 M3 T F F2 M3 indicator always as standard Other indicator options are additional and the indicator must be mounted to lower indicator port. Box 8 Box 6 Bypass valve Options 3M: standard 3D: 2 units 3 units 3N: + units: Lport 2+2 units: Lport 3: + units: Tport 2+2 units: Tport 3+3 units: Tport 4+4 units: Tport + units: Lport 2+2 units: Lport 3+3 units: Lport 4+4 units: Lport Bypass valve Options Indicator 2. bar K Replacement elements with nitrile seals Media 2QE QE QE 2QE Media 2Q Q Q 2Q 93872Q Q Q Q 93872Q Q Q Q Replacement Microglass III elements with nitrile seals Q Q 93873Q Q Q Q Q 93874Q Filter length Nominal flow (I/min) at viscosity 3 ct ingle unit 3M Media 2QE QE QE 2QE 2QE QE QE 2QE G Connection size G R Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: tandard items are in stock, semi standard items are available within four weeks ßx(c)=2.% 6 Degree of filtration Average filtration beta ratio ß (IO 6889) / particle size µm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% % % % % Metal free Ecoglass III 2QE* QE QE 2QE Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. 2 Parker Hannifin Filter Division Europe FDHB2UK. ection 2

25 Throughout the world, Parker is serving more than 4, customers to improve productivity and reliability in thousands of industries. Parker motion and control systems are in operation on satellites orbiting the Earth, in machine tools and mobile equipment, on oil rigs and refineries, in hospitals and laboratories, in fact, wherever there s a need for motion and control, you ll find Parker components and system solutions hard at work. For more information, visit Parker s web site at or call freefone Aerospace Key Markets Commercial transports Military aircraft Regional transports Aircraft engines Business and general aviation Key Products Flight control systems and components Hydraulic systems and components Fuel systems and components Pneumatic systems and components Inert oxygen generating systems Fluid metering, delivery and atomization devices Wheels and brakes Couplings, fittings, hoses and tubes Automation Key Markets Factory automation Transportation and automotive Life sciences and medical Machine tools emiconductor and electronics Key Products Pneumatic motion and control Air preparation Vacuum controls and sensors Electromechanical stepper and servo motors, drives, and controls Human machine interface Electric actuators, gantry robots, slides and linear motors tructural extrusion Climate & Industrial Controls Key Markets Refrigeration and air conditioning Transportation/mobile Process Industrial machinery Medical/life sciences Fuel cells Precision cooling Key Products Pressure regulators Check, ball and service valves Valueadded systems Thermostatic and expansion valves Electronic controllers Contaminant controls Heating/air conditioning hose Gerotors Filtration Key Markets Industrial machinery Process Mobile Marine Oil & gas Power generation and energy Transportation Food and beverage Key Products Hydraulic, lubrication and coolant filters Process, chemical, water and microfiltration filters Compressed air and gas purification filters Condition monitoring Analytical gas generators Nitrogen, hydrogen and zero air generators Engine air, fuel, oil filtration and systems Fluid Connectors Key Markets Construction machinery Agriculture Transportation Mobile Industrial machinery Oil & gas Key Products Rubber and thermoplastic hose Industrial hose Tube fittings and adaptors Tubing and plastic fittings Brass fittings and valves Hose couplings Quick disconnects Hydraulics Key Markets Construction machinery Agriculture Industrial machinery Oil & gas Truck hydraulics Power generation and energy Key Products Hydraulic cylinders and accumulators Hydraulic valves and controls Hydraulic motors and pumps Power takeoffs Hydraulic systems Instrumentation Key Markets Power generation Oil & gas Petrochemical Microelectronics Biopharmaceutical Key Products Medium/high pressure fittings and valves Instrumentation fittings, valves, manifolds and regulators High purity fittings, valves and regulators Fluoropolymer fittings, valves, pumps and regulators Analytical systems eal Key Markets Transportation Energy, oil & gas emiconductor Aerospace Fluid power Life sciences Telecommunications Key Products Elastomeric Orings Homogeneous and inserted elastomeric shapes and diaphragms Metal and plastic retained composite seals Polymeric and plastic dynamic seals Rubber and plastic boots/bellows Extruded and precisioncut/fabricated elastomeric seals Thermoplastic engineered seals

26 The Ch ice is Perfectly Clear Parker ales UK Worldwide ales Locations Tachbrook Park Drive Tachbrook Park, Warwick CV34 6TU, UK Tel: +44 () Fax: +44 () psuk.marketing@parker.com For international sales enquiries contact the appropriate worldwide sales location. Argentina +4 () Australia +6 (2) Austria Belgium +32 (67) 289 Brazil Canada Central & outh America/Caribbean China +86 (2) Czech Republic +42 () Denmark +4 () Finland France Germany +49 () Hong Kong +82 (2) Hungary +36 () India Indonesia Italy Japan Jordan +962 (6) 8679 Korea Malaysia Mexico Netherlands +3 () 4 8 New Zealand +64 (9) Norway Philippines Poland Russia +7 (49) 894 ingapore outh Africa +27 () 96 7 pain +34 (9) weden witzerland Taiwan +886 (2) Thailand United Arab Emirates United Kingdom +44 () UA Venezuela Distributor filtrationinfo@parker.com For all other countries please contact: European Product Information Centre (24 Hr.): (AU, BE, CH, DE, EI, FR and UK only) All other countries: +44 () (English) +44 () (Deutsch) +44 () (Français) Parker Hannifin 26 Brochure: Ref: FDHB2UK Issue Date: 6/6