TTF Series MAX 500 I/min - 10 bar

Transcription

1 MX 5 I/min - bar N INNOVTIVE GREEN FILTER FETURING LEIF LEIF Low pressure filters

2 Features & enefits Features bar rated filter Cast aluminium head LEIF elements Magnetic pre-filtration In-to-Out filtration High level of customisation Full flow bypass with low hysteresis Standard or customised funnel dvantages Can be utilised for severe return line applications Compact profile, lightweight and durable Patented element safeguards the use of genuine parts Removes ferro particles, even during bypass conditions ll captured contamination retains inside the element Dedicated system-matched solutions can be easily made available Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level enefits Reduced downtime due to premature filter failures Less weight, smaller envelop and cleaner appearance Guaranteed quality of filtration Contributes to ISO 4 certification Improved fluid cleanliness levels Extended element life time No recontamination of system during change of elements Improved integration of filter in system combined with lower initial system costs Improved protection of system Significant reduction of oil foaming Typical pplications Waste management trucks Mobile cranes Power packs Wheeled loaders Drilling equipment The Parker Filtration Return Line Filters TTF tank top mounted return line filters feature pre-filtration by means of a magnet column and a full flow bypass with low hysteresis. Thanks to the In-to-Out filter principle, contaminated oil cannot leak back into the system. TTF filters are available in versions capable of handling flow rates up to 5 l/min. They can operate up to a maximum working pressure of bar. Optional filling port in filter cover, second return port and customised diffusers can be specified. Manifold type filter head (TSR Series) with four return ports is also available. Parker Hannifin Filter Division Europe FDHUK. Section

3 Specification Operation pressure: Max. bar. ssembly: Tank top mounted. Connections: Threaded SP ports. Flanged ports on request. Manifold filter head type TSR on request available for flows up to 5 l/min. Filter housing: luminium head and cover. Seal material:, fluoroelastomer, neoprene. Operation temperature range: -4 to + C. ypass setting Opening pressure.8 /.5 or bar. Other settings on request. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimum fatigue life is achieved. Filtration media: Microglass III and Ecoglass III for LEIF elements. lso available µm cellulose and 4µm stainless steel mesh. Element collapse rating: bar (ISO 94) Pressure indicator options: Setting.7 or. bar. Other settings on request. Visual pressure gauge. Electrical pressure switch. Options: Diffuser with and without (type P) perforated flow area for optimum flow path in the reservoir. Magnetic pack: Standard. Filling port in cover: (optional). Filter element: LEIF element with reusable metal element sleeve. Optional conventional style element with steel end caps. The LEIF element is patented and safeguards the use of genuine parts. Note: LEIF element can be used with mineral and HEES type oils. For other fluids consult Parker Filtration. LEIF contributes to ISO 4 quality standards. TTF TSR Free element clearance Ø4 F 8 4x ISO8 G /8 (SP) a xØ 4 ر Mounting hole 9b 4 5 Type -5/-7/-/- -4 / -5 Type -/-9/- Min. oil level TTF sealkit: No Ref. No. Description 4 Flange nut Cover 4 Cover-seal 5 Top-spring Insert 7 Insert-seal 8 Element 9a - Indicator 9b - Plug Mx - Unit-ring Housing Gasket Sleeve 4 Funnel/diffuser 5 O-ring ypass set Ø5 L Ø5 pitch H Standard length TSR Type H F L TSR TSR TSR Dimensions in mm Ports Ports G (SP) G /4 (SP) SE SE Note: ll ports for return flow only Technical specification Max nominal return flow --5 l/min Max working pressure bar Temperature range - C to + C ypass pressure,5 bar LEIF -filtration ratio µ/5µ/µ/µ Seals NR Options Dipstick Indicator (electrical/visual) Low pressure filters

4 Specification (cont.) Torqueload filter-cover TTF- 4 Nm max. TTF- Nm max. Torqueload filter-tank TTF- 5 Nm max. TTF- 4 Nm max. H Type -5/-7/-/- Type -/-9/- -4/-5 Section - with funnel ØD ØD d h H h Optional for TTF series / SE-PSI or G Optional plugged filling port: G/ for TTF series G/4 for TTF series R R K 9 R b 5* Top view Note: TTF-4 and TTF-5 are standard supplied without magnets Type d=sp h h D D H H b R R R K TTF TTF9 8 TTF G /, G /4, G x 9 TTF5 4 TTF7 5 TTF 5 TTF G /4, G / x TTF4 55 TTF5 575 Dimensions in mm Torqueload filter-cover TTF- 4 Nm max. TTF- Nm max. Torqueload filter-tank TTF- 5 Nm max. TTF- 4 Nm max. 9 b K ØD d h H h Optional for TTF series / SE-PSI or G Optional plugged filling port: G/ for TTF series G /4 for TTF series R 5* R R without funnel Section - Type TTF TTF9 TTF TTF5 TTF7 TTF TTF TTF4 TTF5 Dimensions in mm Top view Note: TTF-4 and TTF-5 are standard supplied without magnets d=sp b D h h H R R R K /, /4, /4, / x x 4 Parker Hannifin Filter Division Europe FDHUK. Section

5 Pressure Drop Curves The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from cst, pressure drop over the filter can be estimated as follows: p = ( p x viscosity of medium used) / cst. TSR II- Filter Element Length TSR II- Filter Element Length Q Q 7. Q 4.4 Q Q 5Q Q Q TSR II-5 Filter Element Length TTF - Filter Element Length Q..5 5Q..5 Q. Q Q Q Q.5 7. Q TTF -9 Filter Element Length TTF - Filter Element Length Q 9 Q Q Q.5 7. Q TTF -5 Filter Element Length 5.5 5Q Q 7. Q Q Q.4 Q. Q 8 5 Low pressure filters

6 Pressure Drop Curves (cont.) The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from cst, pressure drop over the filter can be estimated as follows: p = ( p x viscosity of medium used) / cst. TTF -7 Filter Element Length TTF - Filter Element Length Q Q.5 Q 7. Q TTF - Filter Element Length Q Q 5Q Q TTF -4 Filter Element Length Q Q..4. Q Q TTF -5 Filter Element Length Q Q Q Q Q Q Q 4.5. Q Parker Hannifin Filter Division Europe FDHUK. Section

7 TTF Filter Element Length TTF9 Filter Element Length C 4W C 4W TTF Filter Element Length 4 9 TTF5 Filter Element Length C W C 4W TTF7 Filter Element Length TTF Filter Element Length C 4W C 4W TTF Filter Element Length C W Low pressure filters

8 Indicator Options Indicator PS pressure switch Protective cap with dual cable duct for, 7-, mm diameter cable Indicator PS NO/NC pressure switch Protective cover Normally open contacts 4 75 mp.x8 terminals Switch 74 Normally closed contacts 58 7 /F = COM. = N.C. = N.O /F 9 9 Mx G /8 (SP) Ø.5 Mx Ø8 Elec.rating Thread connection Elec.connection Protection Specifications 4V / 4 Mx MP.x.8 terminals + protective cap IP5 (with cap) terminals IP FMUSEMML (Switch) Elec.rating Thread connection Elec.connection Protection Switch type Specifications 4V / G /8 - Mx MP terminal.x.8 IP5 (terminal IP) NO or NC FMUSEMGL (NO switch) FMUSEMGL (NC switch) Visual indicator. bar M: code FMUGEPML G /8: code FMUGEPGL Ordering Information Standard products table Part number Supercedes TTFQLPEG TTF9-G /4 TXWL- 5 MM TTFQLPEG TTF9-G /4 TXWL- 5 MM TTF5QLPEG TTF5-G TXWLE- 5 MM TTF5QLPEG TTF5-G TXWLE- 5 MM TTFQLPEG TTF7-G /4 TXWL4- T 5 MM TTFQLPEG TTF7-G /4 TXWL4- T 5 MM TTF8QLPEG4 TTF-G / TXWL5- T 5 MM TTF8QLPEG4 TTF-G / TXWL5- T 5 MM TTFQLPHG4 TTF5-G / TXWL5C- T MM NMG TTFQLPHG4 TTF5-G / TXWL5C- T MM NMG Flow (l/min) Model number Element length TTF9 Length TTF9 Length TTF5 Length 5 TTF5 Length 5 TTF7 Length TTF7 Length TTF Length 8 TTF Length 8 TTF5 Length TTF5 Length Media rating (µ) Note: Filter assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above. Seals Indicator ypass settings.5 ar ( Psi).5 ar ( Psi).5 ar ( Psi).5 ar ( Psi).5 ar ( Psi).5 ar ( Psi).5 ar ( Psi).5 ar ( Psi). ar (9 Psi). ar (9 Psi) Ports G /4 G /4 G G G /4 G /4 G / G / G / G / Included options None None None None Replacement elements 97878Q 97877Q 9785Q 97875Q 9785Q 97874Q 97855Q 9787Q 97857Q 9787Q Supercedes TXWL- TXWL- TXWLE- TXWLE- TXWL4- TXWL4- TXWL5- TXWL5- TXWL5C- TXWL5C- 8 Parker Hannifin Filter Division Europe FDHUK. Section

9 Ordering Information (cont.) Product configurator Configurator example of a filter ox TTF ox 9 ox 5QL ox 4 V ox 5 S ox H ox 7 L4 ox 8 Configurator example of a TSR Series filter ox TSR ox ox QL ox 4 ox 5 G ox E ox 7 G ox 8 ox TTF TSR ox Housing TTF - TTF -9 TTF - TTF -5 TTF -7 TTF - TTF - TTF -4 TTF -5 TSR- TSR- TSR-5 Filter type ox Element media Disposable element LEIF element Cellulose Nom. rating C Degree of filtration Glass fibre Microglass III (for disposable elements) Ecoglass III (for Leif elements) µ media 5µ media Q 5Q QL 5QL µ media Q QL µ media Q QL Wire mesh bs. rating 4W ox 4 Seal material Fluorelastomer Neoprene Seal type V N ox 5 Indicator Pressure gauge, setting. bar, Mx Pressure gauge, setting. bar, G /8 for dual head ports and TSR series Pressure switch 4V,. bar setting, NO/NC, Mx Pressure switch 4V,. bar setting, NO with G /8 SP Pressure switch 4V,. bar setting, NC with G /8 SP Pressure switch 5V, NO/NC with G /8 Pressure switch V, NO/NC with M No indicator, indicator ports not machined No indicator, indicator port R plugged No indicator, indicator ports L + R plugged Other settings for indicators / gauges on request Note: for all dual head ports and TSR series apply G /8 connection for indicator G G S S S S4 S5 N P P on request ox ypass valve.8 bar.5 bar. bar for TTF series locked bypass Other bypass settings ypass valve E H X on request ox 7 Filter connection Ports G /4" (SP) (-/-9/-) G" (SP) (-/-9/-) G /4" (SP) (-7/-/-/-4/-5) G /"(SP) (-7/-/-/-4/-5) /" SE- PSI (nd port) + G /" G" (nd port) + G /" G /4" (SP) + Ports G" (TSR only) xg /" (SP) + Ports G" (TSR only) SE + Ports SE (TSR only) xse + Ports SE (TSR only) G G G G4 L4 G G G S S ox 8 Options Options No diffuser required with perforated plate area Diffuser type P without perforated plate area Diffuser with integrated hose connection No magnets Dipstick filling port and no magnets Diffuser type P and no magnets, no magnets, plugged filling port Diffuser type P, no magnets, plugged filling port Other combinations 4 on request 5 8 C D on request Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note : lternate displayed part number selection will require you to contact Parker Filtration for availability. ßx(c)= 5.% Degree of filtration verage filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)= ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 9% % % 99.9% Media code Q/QL 5Q/5QL Q/QL Q/QL Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks Low Pressure Filters

10 Ordering Information (cont.) TTF - TTF -9 TTF - TTF -5 TTF -7 TTF - TTF - TTF -4 TTF -5 TSR TSR TSR5 Supercedes spare element table TXWL- 978Q TXWL- 9784Q TXWLD- 9785Q TXWLE- 978Q TXWL4-9787Q TXWL5-9788Q TXWL5-9789Q TXWL5-978Q TXWL5C- 978Q PXWL- 9788Q PXWL Q PXWL Q TXWL Q TXWL Q TXWLD Q TXWLE Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL5C Q PXWL Q PXWL Q PXWL Q TXWL- 9788Q TXWL Q TXWLD- 9785Q TXWLD- 9785Q TXWL4-9785Q TXWL Q TXWL Q TXWL5-9785Q TXWL5C Q PXWL- 9789Q PXWL4-9789Q PXWL Q TXWL- 9788Q TXWL Q TXWLD- 9787Q TXWLE Q TXWL Q TXWL5-9787Q TXWL5-9787Q TXWL5-9787Q TWXL5C- 9787Q PXWL Q PXWL4-9789Q PXWL Q TTF - TTF -9 TTF - TTF -5 TTF -7 TTF - TTF - Supercedes spare element table TXX TXX TXXD TXXE TXX TXX TXX TXW Q TXW Q TXWD Q TXWE Q TXW Q TXW Q TXW Q TXW Q TXW Q TXWD Q TXWE Q TXW Q TXW Q TXW Q TXW Q TXW Q TXWD Q TXWE Q TXW Q TXW Q TXW Q TXW Q TXW Q TXWD Q TXWE Q TXW Q TXW Q TXW Q ST ST STD STE ST ST ST Parker Hannifin Filter Division Europe FDHUK. Section