RT en. Hermetel Oy manufactures a wide range of high-quality doors primarily intended for cold and freezer rooms as well as production

Size: px

Start display at page:

Download "RT en. Hermetel Oy manufactures a wide range of high-quality doors primarily intended for cold and freezer rooms as well as production"

Regina Nelson
6 years ago
Views:

Product information ugust 2014 valid until 30.9.

cold rooms and freezer rooms Sliding for cold rooms and freezer rooms Swinging

wide range of high-quality primarily intended for cold and freezer rooms as

Wherever well-insulated, sealable and durable are required, Hermetel Oy can

In product development and production, testing has been undertaken to find

1 Product information ugust 2014 valid until (8) RT en 329 Talo Talo 90 X32 special Sf Hinged for cold rooms and freezer rooms Sliding for cold rooms and freezer rooms Swinging oors for production premises Special Hermetel Oy Hermetel Oy manufactures a wide range of high-quality primarily intended for cold and freezer rooms as well as production premises. Wherever well-insulated, sealable and durable are required, Hermetel Oy can provide the solution. In product development and production, testing has been undertaken to find appropriate and customer-friendly implementations. Thanks to the wide range of available sizes and the comprehensive selection, it is always possible to find the right type of door. Tailor-made diversify the selection further.

RT 38450 en Product information 2 KTO LIGHTWEIGHT COL ROOM OOR N KTOP LIGHTWEIGHT OULE OOR N PTO LIGHTWEIGHT FREEZER ROOM OOR urable Hermetel R lift-off spring hinge He/Roc2000, used in lighter

door -0 C to -25 C STRUCTURE N MTERILS oor leaf insulation thickness 80 mm, rabbeted door leaf, shaped door edges Standard external and internal surface material: hot galvanised steel sheet,

6 mm, with baked powder finish, average thickness 70 m etween the surface sheets: foamed in mould HFC-free polyurethane, 40 kg/m 3 ll single leaf KTO and PTO and KTOP double : 2 self-closing,

2.0 mm Cellular insulation core oor is surface mounted oor orientation is interchangeable; hinges according to right/left-handedness ll models have a flexible magnetic seal, easy gasket replacement

2 RT en Product information 2 KTO LIGHTWEIGHT COL ROOM OOR N KTOP LIGHTWEIGHT OULE OOR N PTO LIGHTWEIGHT FREEZER ROOM OOR urable Hermetel R lift-off spring hinge He/Roc2000, used in lighter KTO/PTO-6-9 Hermetel iron hinge, stainless steel, used in heavier KTO-/PTO single leaf door Temperature ranges KTO lightweight cold room and KTOP double : +0 C to +60 C PTO lightweight freezer room door -0 C to -25 C STRUCTURE N MTERILS oor leaf insulation thickness 80 mm, rabbeted door leaf, shaped door edges Standard external and internal surface material: hot galvanised steel sheet, thickness 0.6 mm, with baked powder finish, average thickness 70 m etween the surface sheets: foamed in mould HFC-free polyurethane, 40 kg/m 3 ll single leaf KTO and PTO and KTOP double : 2 self-closing, lift-off spring hinges made of stainless steel, model He/Roc 2000 Wide ( mm): 2 or 3 Hermetel H hinges (stainless steel) Frame: hot galvanised steel sheet with baked powder finish, thickness 2.0 mm Cellular insulation core oor is surface mounted oor orientation is interchangeable; hinges according to right/left-handedness ll models have a flexible magnetic seal, easy gasket replacement KTOP double door STNR FITTINGS KTO and PTO : a tubular door pull on the outside PTO : a resistance-type heating cable in the frame, P = 230 V, 50 Hz + switch casing KTOP cold room double : an overhead closer or concealed closer on the inside of the auxiliary door door pull on the access door OPTIONL FITTINGS Surface material of the door leaf: plastic-coated steel, stainless steel ISI 304 Grid 180, HST acid-proof steel or aluminium Frame: stainless steel. In this case please note that the magnetic seal does not function because stainless steel is not magnetic; a bolt is required rubber seal if required n adjustable double rubber sweeper gasket for skirted Stainless steel kickplates, touch plates etc., height free Shock-proof plastic shields, height free For KTO and KTOP cold room double : an bloy or another type of surface-mounted lock For PTO freezer room : a lock featuring a safety opening device on the inside, e.g. Jumbo-6000 or F491 Thermal windows for the Standard dimensions of KTO, PTO and KTOP Clear opening size x,mm Outside dimensions of frame Cx,mm oor type Skirted door oor with threshold Single leaf KTO/PTO x x x 2200 KTO/PTO-7,5 750 x x x 2200 KTO/PTO x x x 2200 KTO/PTO-10, x x x 2200 KTO/PTO x x x 2200 KTO/PTO-13, x x x 2200 ouble KTOP x x x 2200 KTOP-16, x x x 2200 KTOP x x x 2200 KTOP-19, x x x 2200 KTOP x x x 2200 KTOP-22, x x x 2200 KTOP x x x 2200 KTOP-25, x x x 2200 Other heights: 2200 mm, 2400 mm, 2600 mm. Frame height adjusted accordingly. Other heights and widths are non-standard. Sweeper clear opening 2050 Threshold clear opening 2000

RT 38450 en Production information 3 KTOk-S N PTOk-S MILEWEIGHT OORS FOR COL ROOMS N FREEZER ROOMS KTOk-S Gasket Jumbo lock Standard dimensions of KTOk-S and PTOk-S Clearopening size x,mm Temperature

2200 KTOk-S/PTOk-S 9 900 x 2100 1060 x 2150 1060 x 2200 KTOk-S/PTOk-S 10,5 1050 x 2100 1210 x 2150 1210 x 2200 KTOk-S/PTOk-S 12 1200 x 2100 1360 x 2150 1360 x 2200 KTOk-S/PTOk-S 13,5 1350 x 2100 1510

KTOk-S/PTOk-S 19,5P 1950 x 2100 2110 x 2150 2110 x 2200 KTOk-S/PTOk-S 21P 2100 x 2100 2260 x 2150 2260 x 2200 KTOk-S/PTOk-S 22,5P 2250 x 2100 2410 x 2150 2410 x 2200 KTOk-S/PTOk-S 24P 2400 x 2100

3 RT en Production information 3 KTOk-S N PTOk-S MILEWEIGHT OORS FOR COL ROOMS N FREEZER ROOMS KTOk-S Gasket Jumbo lock Standard dimensions of KTOk-S and PTOk-S Clearopening size x,mm Temperature ranges Pinta-asenteisen karmin ulkomitat C x, mm oor type Skirted door oor with threshold Yksilehtiset KTOk-S/PTOk-S x x x 2200 KTOk-S/PTOk-S 7,5 750 x x x 2200 KTOk-S/PTOk-S x x x 2200 KTOk-S/PTOk-S 10, x x x 2200 KTOk-S/PTOk-S x x x 2200 KTOk-S/PTOk-S 13, x x x 2200 Kaksilehtiset KTOk-S/PTOk-S 15P 1500 x x x 2200 KTOk-S/PTOk-S 16,5P 1650 x x x 2200 KTOk-S/PTOk-S 18P 1800 x x x 2200 KTOk-S/PTOk-S 19,5P 1950 x x x 2200 KTOk-S/PTOk-S 21P 2100 x x x 2200 KTOk-S/PTOk-S 22,5P 2250 x x x 2200 KTOk-S/PTOk-S 24P 2400 x x x 2200 KTOk-S/PTOk-S 25,5P 2550 x x x 2200 Other heights: 2200 mm, 2400 mm, 2600 mm. Frame height adjusted accordingly. Other heights and widths are non-standard. Mainly for industrial use Temperature range: +0 C to +60 C For freezer: -20 C to 0 C STRUCTURE N MTERILS oor leaf thickness 100 mm, door leaf without rabbet, shaped door edges Standard external and internal surface material: hot galvanised steel sheet, thickness 0.6 mm with baked powder finish, average thickness 70 m etween the surface sheets: foamed in mould polyurethane, HFC 40 kg/m 3 ll door models have three self-closing Hermetel iron hinges Magnetic gasket olt mechanism + inside safety latch Frame: hot galvanised steel sheet with baked powder finish, thickness 2.0 mm, reinforced frame and insulation The door is surface-mounted, fixed with cylinder head bolts through wall or with hidden bolts or screws long closer in double STNR FITTINGS In addition to the features mentioned above, the have a bolt mechanism equipped with a safety opening device on the inside n overhead closer or concealed closer on the inside of the auxiliary door OPTIONL FITTINGS Skirted have an adjustable double rubber sweeper gasket Stainless steel kickplates, height free Shock-proof plastic shields, approved for foodstuffs Surface material of the door leaf and frame: stainless steel ISI 304 Grid 180 or acid-proof steel Track opening at the top of the door, e.g. size 300 x 500 mm, rubber flaps in the opening, fittings and edge frame Locking devices, stay fasteners Thermal window Plywood reinforcement beneath the door leaf Strip curtain for the door opening oor surfaces made from plastic-coated steel sheets are also available High are fitted with an extra hinge Please note when placing an order The orientation (left/right-handedness) of single leaf must be mentioned when ordering. The right door leaf of double is normally the access door and the left leaf is the auxiliary door. If the reverse is needed, this must be mentioned in the order. C C Sweeper - Threshold Sweeper - Threshold - -

RT 38450 en Product information 4 TTO OOR N TTOP OULE OOR FOR PROUCTION PREMISES Temperature range Temperature range for TTO and TTOP double for production premises: +0 C to +60 C STRUCTURE N

6 mm Foamed polyurethane 40 kg/m 3 in the form between the surface panels Stainless steel pivot hinges equipped with bearings formed cellular rubber seal bloy lockbody and handle Frame: formed

have a threshold SURFCE FINISH Surface sheets and frame (hot galvanised steel sheet) aked powder or coated steel sheet (POL, Pural, PF), RST surface, HST surface OPTIONL FITTINGS For skirted :

locations that demand durability, hygiene and ease of cleaning such as industrial production premises, supervision booths and various institutions.

Standard dimensions of TTO and TTOP The production premises TTO and TTOP are designed for heated spaces in shops and food production facilities.

C - - C - - oor type Clear opening size x,mm Single leaf Frame dimensions Cx,mm TT0 8 x 21 700 x 2040 800 x 2100 TTO 9 x 21 800 x 2040 900 x 2100 TTO 10 x 21 900 x 2040 1000 x 2100 TTO 11 x 21

4 RT en Product information 4 TTO OOR N TTOP OULE OOR FOR PROUCTION PREMISES Temperature range Temperature range for TTO and TTOP double for production premises: +0 C to +60 C STRUCTURE N MTERILS oor leaf thickness 52 mm, rabbeted, shaped edges Surface sheets are hot galvanised or stainless steel, thickness 0.6 mm Foamed polyurethane 40 kg/m 3 in the form between the surface panels Stainless steel pivot hinges equipped with bearings formed cellular rubber seal bloy lockbody and handle Frame: formed steel profile The inside of the frame is either hollow or insulated The frame is installed directly in the opening and fixed with hidden screws stainless steel threshold, with a sweeper do not have a threshold SURFCE FINISH Surface sheets and frame (hot galvanised steel sheet) aked powder or coated steel sheet (POL, Pural, PF), RST surface, HST surface OPTIONL FITTINGS For skirted : a single rubber sweeper or descending bottom seal Various locks, toilet fittings Hidden door closers for the auxiliary door of double Single or double windows including beading PPLICTIONS For locations that demand durability, hygiene and ease of cleaning such as industrial production premises, supervision booths and various institutions. Storage, bottle return areas and cleaning rooms in shops. Standard dimensions of TTO and TTOP The production premises TTO and TTOP are designed for heated spaces in shops and food production facilities. epending on the ' use, they can be fitted with flush-mounted windows, equal to the door's thickness, with tempered glass, standard glass and laminated glass (clear/tinted) glazing. C - - C - - oor type Clear opening size x,mm Single leaf Frame dimensions Cx,mm TT0 8 x x x 2100 TTO 9 x x x 2100 TTO 10 x x x 2100 TTO 11 x x x 2100 TTO 12 x x x 2100 ouble TTOP 13 x x x 2100 TTOP 14 x x x 2100 TTOP 15 x x x 2100 TTOP 16 x x x 2100 TTOP 17 x x x 2100 TTOP 18 x x x 2100 The clear opening height is 2040 mm (threshold) or 2070 mm (sweeper) and the external height of the frame is 2100 mm. Installation opening = external dimensions of the frame. Stove enamelled double door. Stainless steel door.

RT 38450 en Product information 5 HERMETEL EST OOR SWINGING OORS VNTGES OF HERMETEL SWINGING OORS 1. Extensive range of sizes 2. Excellent installation opening to access opening ratio 3.

Sturdy and long-lasting frame construction for all wall thicknesses 9. Easy to install 10. Hygienic, impact-resistant kickplate 11. Replaceable kickplate 12.

Materials can be recycled PPLICTIONS HHO N HHOP INSULTE SWINGING OORS Hermetel-swinging have been designed for Foot and forklift traffic locations requiring convenient two-way access Locations that

hospitals Industrial halls Cooling plant rooms Stainless steel double door HHO is a single leaf door; HHOP is a double leaf door.

is either powder-coated Zn steel sheet, thickness 0.6 mm, powder-coated l steel sheet, thickness 1.0 mm or stainless steel sheet (ground grit 180 or 400), thickness 0.

STNR FITTINGS Impact-resistant buffer sheets are available for the in different heights; standard colours grey or black, standard height 1000 mm.

5 RT en Product information 5 HERMETEL EST OOR SWINGING OORS VNTGES OF HERMETEL SWINGING OORS 1. Extensive range of sizes 2. Excellent installation opening to access opening ratio 3. Flexible and durable hinges 4. Non-breakable gaskets 5. Lightweight structure 6. djustable door sweeper 7. lternative surface materials (i.e. stainless steel sheet) 8. Sturdy and long-lasting frame construction for all wall thicknesses 9. Easy to install 10. Hygienic, impact-resistant kickplate 11. Replaceable kickplate 12. Separate stainless steel buffer railing for forklift traffic 13. ffordable in all sizes 14. Materials can be recycled PPLICTIONS HHO N HHOP INSULTE SWINGING OORS Hermetel-swinging have been designed for Foot and forklift traffic locations requiring convenient two-way access Locations that require hygienic, durable and easy-to-clean swinging Openings that require well-insulated but with swinging door functionality SMPLE LOCTIONS Shops, wholesale warehouses Public buildings Schools, hospitals Industrial halls Cooling plant rooms Stainless steel double door HHO is a single leaf door; HHOP is a double leaf door. STRUCTURE oor thickness 40 mm insulated with polyurethane foam 40 kg/m 3 edges specially formed to ensure there are no holes, screws or pop rivets on the surface epending on the order, the door leaf is either powder-coated Zn steel sheet, thickness 0.6 mm, powder-coated l steel sheet, thickness 1.0 mm or stainless steel sheet (ground grit 180 or 400), thickness 0.8 mm For powder-coated sheets it is possible to use colours from the RL colour chart. If required, the door's two sides can be different colours. STNR FITTINGS Impact-resistant buffer sheets are available for the in different heights; standard colours grey or black, standard height 1000 mm. The impact sheet is attached with flush rivets that are recessed in the panel. Impact protectors can be replaced afterwards. oors have a single-pane acrylic window, size 300 x 500 mm, or a polycarbonate window of the same size for demanding conditions. The window is attached with anodised aluminium lists that cannot be loosened by the goods being transported through the door. oor frame stainless steel, wall thickness 1.5 mm. Screw-attached frame made according to wall thickness. The grip and stiffness are excellent. HHO single leaf door HINGE The Hermetel swinging door's plastic hinge and counterpart are recessed inside the door. The hinge has been tested 1,000,000 times without it showing any signs of damage that would hinder its operation. ecause the hinge works as a sliding bearing it requires no oil or grease and is thus maintenance-free. The hinge withstands floor and forklift traffic. Standard have 2 hinges; higher have 3 hinges. Hinge stiffness is adjustable. HHOP double leaf door Hinge Window oor sweep

RT 38450 en Product information 6 HHOPK N HHOPKP NON-INSULTE POLYCRONTE SWINGING OORS OOR OPERTION Using the door is easy and effortless because the hinge has been designed to automatically return

6 RT en Product information 6 HHOPK N HHOPKP NON-INSULTE POLYCRONTE SWINGING OORS OOR OPERTION Using the door is easy and effortless because the hinge has been designed to automatically return both sides of the door to the 0 position, even from an angle of 88. ouble are also aligned to the correct position opposite each other. The door's weight resistance of only 2-5 kg, which makes it the most user-friendly door on the market. t an angle of 95, the door automatically remains open and with a light motion closes itself. The hinge also tolerates a slight amount of excessive torsion (95 ). The hinge does not protrude from the door's surface (except for the attachment screws). oor sweep ouble-rubber, height-adjustable door sweep HHOPK OORS Except for the door leafs the structure is the same as in the HHO and HHOP. oor leaf structure The door leaf is 8 mm impact-resistant polycarbonate sheet. window is not necessary because the door is transparent. lso available as a coloured polycarbonate sheet; a window is required for transparency. The door can have the same impact plates and protectors as insulated The door edge stiffeners are formed from stainless steel reinforcements, inside which plastic panels and Hermetel hinges are attached. The reinforcements' width is 160 mm in all. The frame and hinge are identical to those in insulated. oor sweep single-rubber, list attachment OPTIONL FITTINGS Kickplates stainless steel PVC plastic sheet range of windows oor surface colours according to RL colour chart. Forklift impact protectors The protectors installed at the door frames shield the frames from forklift impacts. The forklift impact protectors are outside the drive opening. The impact protectors for the door hinges, together with the door frame impact protectors, safeguard the door opening mechanisms effectively. Impact protectors oor type Structure of impact protectors The door frame impact protectors consist of 40 x 40 mm stainless steel tubes attached to the door frames with screws and to the floor with cotter bolts. The forklift impact protectors outside the width of the openings are 60 x 60 mm powder-coated steel tubes or stainless steel tubes lined with yellow stripes. They are attached to the floor with cotter bolts and to the wall with screws. The hinge impact protection consists of Ø 10 stainless steel rods and stainless Installation opening ±10 mm steel sheet attached to the door frame impact protector. HHOM oor width mm Clear opening mm Single Insulated Opaque PC Transparent PC HHO-7*VK HHOM-7*VK HHOPK-7 *VK HHO-8*VK HHOM-8*VK HHOPK-8*VK HHO-9*VK HHOM-9*VK HHOPK-9*VK HHO-10*VK HHOM-10*VK HHOPK-10*VK HHO-11*VK HHOM-11*VK HHOPK-11*VK HHO-12*VK HHOM-12*VK HHOPK-12*VK HHO-13*VK ouble Insulated Opaque PC Transparent PC HHOP-14*VK HHOMP-14*VK HHOPKP-14*VK x HHOP-15*VK HHOMP-15*VK HHOPKP-15*VK x HHOP-16*VK HHOMP-16*VK HHOPKP-16*VK x HHOP-18*VK HHOMP-18*VK HHOPKP-18*VK x HHOP-20*VK HHOMP-20*VK HHOPKP-20*VK x HHOP-22*VK HHOMP-22*VK HHOPKP-22*VK x HHOP-24*VK HHOMP-24*VK HHOPKP-24*VK x HHOP-26*VK x * Standard heights (VK) of clear openings: 2100, 2300, 2500, 2700 and 3000 mm. oor leaf 8 mm PVC plastic sheet Single pane 300 x 500 mm acrylic window in door. The door can have the same impact plates and protectors as insulated.

RT 38450 en Product information 7 HERMETEL SLIING OORS The lightweight HLO sliding door is intended for use primarily in foot traffic or light roller cage traffic areas where the use of a hinged door

For cold rooms with a temperature range of ±0 C to +20 C For freezer rooms with a temperature range of ±0 C to -40 C For heat rooms with a temperature range of +20 C to +70 C HLO LIGHTWEIGHT SLIING

the door is opened, the slide rail raises the door to prevent the rubber gasket from rubbing against the floor or walls The door slides very easily track at the lower end of the door, together with

room The heavyweight HLOS door is used when a lightweight sliding door is insufficient. For demanding functional conditions For forklift traffic For cold rooms with a temperature range of ±0 C.

..+70 C For other spaces that require well-insulated, tightly-sealed and functional sliding STNR FITTINGS Heat resistance in freezer room, 110-200 W Rubber gasket in all Hand grip OPTIONL FITTINGS

steel tube profiles Padlock with lug handles, in freezer rooms they can be opened from the inside Protective housing for slide rail Impact protection post For forklift traffic Low models, higher

7 RT en Product information 7 HERMETEL SLIING OORS The lightweight HLO sliding door is intended for use primarily in foot traffic or light roller cage traffic areas where the use of a hinged door is difficult owing to, for example, space limitations. For cold rooms with a temperature range of ±0 C to +20 C For freezer rooms with a temperature range of ±0 C to -40 C For heat rooms with a temperature range of +20 C to +70 C HLO LIGHTWEIGHT SLIING OOR OOR STRUCTURE oor leaf thickness 52, 65, 80 or 100 mm, depending on the use Maximum height 2500 mm Surface panels galvanised, stainless or aluminium-coated steel sheet Surface panel thickness mm, standard thickness 0.75 mm Panels' corners welded shut Foamed polyurethane 40 kg/m3 in the form between the surface panels t all door edges a 1 or 2-part rubber gasket and slide rail seals the door extremely well When the door is opened, the slide rail raises the door to prevent the rubber gasket from rubbing against the floor or walls The door slides very easily track at the lower end of the door, together with tightening devices attached to the floor, seal the door and control its movement Tightening devices are made from wear-resistant metal No frames in cold room and heat room Heated frame in freezer room The heavyweight HLOS door is used when a lightweight sliding door is insufficient. For demanding functional conditions For forklift traffic For cold rooms with a temperature range of ±0 C C For freezer rooms with a temperature range of ±0 C C For heat rooms with a temperature range of +20 C C For other spaces that require well-insulated, tightly-sealed and functional sliding STNR FITTINGS Heat resistance in freezer room, W Rubber gasket in all Hand grip OPTIONL FITTINGS Insulated glass window for, dimensions according to the door size Various kickplates, stainless steel or textured aluminium Stainless steel touch plates Inside or outside impact protectors made of steel tube profiles Padlock with lug handles, in freezer rooms they can be opened from the inside Protective housing for slide rail Impact protection post For forklift traffic Low models, higher model the same height as the door also available Lightweight HLO sliding door fitted with pull handles SURFCE TRETMENT N MTERILS oor leaf and frame Oven-baked enamel (galvanised steel sheet) Plastic coating (coated panel), colour shades selected from RR chart Slide rail Slide rail Hermetel F2320 Track anodised aluminium Plastic slide rollers oor's suspension fittings anodised aluminium, plastic-protected fittings djustment mechanism in suspension fittings Rubber stoppers in slide rail Maximum door weight 80 kg Lower guide Upper guide Opener on the inside of the door Impact post protection Lightweight HLO sliding door fitted with torque handles.

RT 38450 en Product information 8 HLOS HEVY SLIING OOR OOR STRUCTURE Thickness of door leafs: in cold rooms 80 mm or 100 mm, in freezer rooms 100 mm or 150 mm, in other spaces 80, 100 or 150 mm

8 RT en Product information 8 HLOS HEVY SLIING OOR OOR STRUCTURE Thickness of door leafs: in cold rooms 80 mm or 100 mm, in freezer rooms 100 mm or 150 mm, in other spaces 80, 100 or 150 mm Surface panels galvanised, stainless steel or aluminium-coated steel sheet Surface panel thickness mm, standard thickness 0.75 mm Panel corners welded shut Foamed polyurethane 40 kg/m3 in the form between the surface panels oor leaf is reinforced with a metal or wooden frame for the attachment of fittings t all door edges there is a 1 or 2-part rubber gasket that with the help of the slide rail seals the door extremely well When the door is opened, the slide rail raises the door to prevent the rubber gasket from rubbing against the floor or walls track at the lower end of the door, together with tightening devices attached to the floor, seal the door and control its movement djustable tightening devices are made from wear-resistant metal The door slides very easily, and opening it requires very little effort SURFCE FINISH oor and frame either baked enamelled galvanised steel sheet, coated steel sheet or stainless steel sheet. STNR FITTINGS Heat resistance in freezer room, W Heating beam at lower edge of door opening Rubber gasket in all Sliding mechanisms Sealing gasket between leafs of double Torque action to facilitate the door's manual operation (stainless steel tubes, anodised aluminium attachments) OPTIONL FITTINGS Insulated glass window for, dimensions according to the door size Various kickplates, stainless steel or textured aluminium Stainless steel touch plates Inside and/or outside impact protectors made of steel tube profiles Padlock with lug handles, in freezer rooms they can be opened from the inside Protective housing for slide rail ccess door for foot traffic SLIE RILS Slide rail is Hermetel F3530, F3530V or F4460, depending on size and weight of door Track from yellow chromated steel profiles or stainless steel Sliding carriage is anodised aluminium and bearing-mounted stainless steel slide rollers, two-part bearings in suspension section oor's suspension fittings anodised aluminium, covered with plastic-coated housing djustment mechanism in suspension fittings Maximum door weights for slide rails F kg (single leaf) F3530V kg (double leaf) F kg (single leaf) TVRFC 5 Z7M-46 (example of sliding door mechanism) The mechanism has a 'sliding gear', i.e. the door can be operated in the event of a power outage. Control panel E6 iverse uses Option to attach additional accessories afterwards ccessories Mechanism Control panel 3-button (open-stop-close) Sensor edge Switch/sensor edge Pull switch Optional fittings 4-button (1/1 open - 1/2 open - stop - close) Protective light cell Sensors ccess control Radio control Timing devices Vehicle detectors Warning buzzers and lights Remote control system Mechanism Power 0.23 kw Voltage 400 V 50 Hz Current 1.35 The closing power can be smoothly adjusted with a sliding switch. The switch also protects the mechanism from overloading and dampens start-up impulses. The limit switches have been integrated inside the machinery. esides the normal Heavyweight HLOS sliding door, stainless steel-surfaced. open-close switches, the border switch mechanism facilitates the installation of four additional switches for the control of such functions as the operation of safety equipment and traffic lights. The border switch mechanism is durable and will not break even if someone drives over the border locations. Manually operated override switches can also be installed in the mechanism. oor mechanisms are selected according to the door's weight; contact Hermetel Oy for additional information. IMENSIONS OF HERMETEL SLIING OORS Single leaf Lightweight HLO sliding door width mm, in 100 mm increments height mm, in 100 mm increments Heavyweight HLOS sliding door width mm, in 100 mm increments height mm, in 100 mm increments ouble leaf Heavyweight HLOS sliding door width 4000 mm height 4000 mm MNUFCTURING, SLES N INFORMTION Hermetel Oy P.O.ox 29 (Ollostentie 46) FI ORIMTTIL, FINLN Tel Fax myynti@hermetel.com

INDUSTRIAL DOORS COLDROOM AND FREEZER GAS-PROOF SWING UNIVERSAL. TECHNICAL CATALOG. version

INDUSTRIAL DOORS COLDROOM AND FREEZER GAS-PROOF SWING UNIVERSAL. TECHNICAL CATALOG. version TECHNICL CTLOG INDUSTRIL DOORS COLDROOM ND FREEZER GS-PROOF SWING UNIVERSL PaNELTECH Sp. z o.o. 4-58 Chorzów ul. Michałkowicka 24 tel. 32 245 9 4 fax 32 245 9 39 drzwi@paneltech.pl www.paneltech.pl version