TYPICAL INDICATOR ORDERING EXAMPLE. Lamps. Incandescent Lamp Used with Solid Cap 05 5-volt volt. Incandescent or Neon Lamp Used with Insert Cap
|
|
|
- Kimberly Barber
- 6 years ago
- Views:
Transcription
1 KB K Shapes Bushing ounting Snap-in ounting W01 Housing Black only Terminals Silver Solder Lug* * Wire harness & cable assemblies offered only in Americas TYPICAL INDICATOR ORDERING EXAPLE 02 K W01 5C 5D DESCRIPTION FOR TYPICAL ORDERING EXAPLE 5F KB02KW01-12-FF Lamps Incandescent Lamp Used with Solid Cap Incandescent or Neon Lamp Used with Insert Cap volt Neon Used with Cap for LED Colors 6B 6F 6G Red Amber Green Super Used with Cap for LED White Green Blue No Code Resistor No Resistor volt 12 Cap Types & Colors Solid Cap: Lens/Filter Colors BB White/White FB Green/White CB Red/White FF Green/Green CC Red/Red GB Blue/White EB Yellow/White GG Blue/Blue JE * * JG AB JD Insert Cap: Lens/Filter Colors Clear/Red Clear/Yellow Clear/Green Clear/Blue * & JG not suitable with neon. LED Cap: Lens/Diffuser Colors Spot Illuminated Black Cap/White Window Clear/Red Clear/Amber Clear/Green LED Cap: Lens/Diffuser Colors 12-volt Incandescent Lamp Solid Cap with Green Lens and Green Filter Black Housing with Bushing ounting Silver Solder Lug Terminals FF 9
2 Complement to KB Pushbuttons Without W01 (14mm) (14mm) AT611 Incandescent Silver Solder Lug T-1 Bi-pin LEDs are colored in OFF state. T Bi-pin Bushing ounting Panel Thickness:.020 ~.315 (0.5 ~ 8mm) SHAPES & OUNTING TYPES (14mm) (14mm) Bushing ounting Snap-in ounting TERINALS The bezel is an integral part of the indicator body. Panel Cutouts With LAP COLORS & SPECIFICATIONS x.728 (14mm x 18.5mm) x.728 (14mm x 18.5mm) Panel Thickness: ~.138 (1.0 ~ 3.5mm) The electrical specifications shown are determined at a basic temperature of 25 C. If the source voltage exceeds the rated voltage,a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in the Supplement section. AT615 Neon Voltage V 5V AC 12V AC 110V AC Current I 115mA 60mA 1.5mA Endurance Hours 7,000 average 10,000 Color Codes (2.0).079 (4.9).193 Thk = (0.2) Incandescent & Neon Lamps without Resistor Snap-in ounting (1.2) R.047 (6.8).268 Recommended Resistors for Neon: 33K ohms for 110V AC; 100K ohms for 220V AC Forward Peak Current I F 30mA 30mA 30mA 20mA 20mA 20mA 1.9V 2.0V 2.1V Reverse Peak Voltage V R 5V 5V 5V 0.42mA/ C 0.29mA/ C 0.42mA/ C 5C 5D 5F No Code No Resistor 10
3 LEDs are colored in OFF state. 5-volt 2-element with 1 Resistor AT625G Blue AT631B White AT632F Green T Bi-pin Lens/Filter Colors Available: BB CB CC EB LAP COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25 C. If the source voltage exceeds the rated voltage,a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in the Supplement section. Color Codes: 12-volt 4-element with 2 Resistors with Resistor FB FF GB GG T-1 Bi-pin AT485 (+) 24-volt 4-element with 2 Resistors Resistor Codes 5C 5D 5F Forward Peak Current I F 25mA 20mA 10mA 5V 12V 24V Reverse Peak Voltage V R 4V 8V 16V CAP TYPES & COLOR COBINATIONS Color Codes: B White C Red E Yellow F Green G Blue J Clear Super Bright Single Element LED ATTENTION ELECTROSTATIC SENSITIVE DEVICES Solid Cap for Incandescent Lamp AT486 aterial: Polycarbonate Color White Green Blue Forward Peak Current I F 30mA 30mA 30mA 20mA 20mA 20mA 3.6V 3.5V 3.6V Reverse Peak Voltage V R 5V 5V 5V 0.50mA/ C 0.50mA/ C 0.50mA/ C AT4021 6B 6F Translucent Colored Lens Translucent Colored Filter Lamp AT611 6G (-) 11
4 Complement to KB Pushbuttons Lens/Filter Colors Available: JE JG Cap/Window Colors Available: AB Opaque Black Cap with Translucent White Window for Spot Illumination Cap for without Resistor or LED with Resistor Lens/Diffuser Colors Available: (AT4133, 4132, 4134 white diffusers; AT4158, 4160, 4159 colored diffusers) JD AT487 Spot Illuminated Cap for without Resistor or with Resistor AT4051 aterial: Polycarbonate Transparent Clear Lens aterial: Polycarbonate (3.0).118 Finish: atte AT4133 AT4132 AT4134 AT4158 AT4160 AT4159 CAP TYPES & COLOR COBINATIONS Color Codes: A Black B White C Red D Amber E Yellow F Green G Blue J Clear Insert Cap for Incandescent or Neon Lamp AT488 and JG not suitable with neon lamp. aterial: Polycarbonate AT4022 (4.6).181 Transparent Clear Lens Translucent Colored Filter Lamp AT611 Translucent Diffuser Lamp AT615 12
5 Lens/Diffuser Colors Available: Clear Lens White Diffuser (2.3).090 (14.0) Sq (14.0) Dia (2.3).090 (14.0) Dia (14.0) Sq AT4133 (3.5).138 (3.5).138 CAP TYPES & COLOR COBINATIONS (5.3).209 (5.3).209 Cap for Super AT4132 aterial: Polycarbonate AT4134 TYPICAL INDICATOR DIENSIONS 12 P1 (14.2).559 (24.7).972 (24.7).972 (14.0) x (2.0) Typ x.079 (14.0) x (2.0) Typ x.079 (18.5).728 (18.5).728 (9.0).354 (9.0).354 (0.2) Typ (0.2) Typ Typ Typ Translucent Clear Lens Translucent White Diffuser Super s AT625, AT631, AT632 Bushing ount KB01KW01-05-GG Snap-in ount KB05KW01-05-FF 13
TYPICAL INDICATOR ORDERING EXAMPLE W01. Lamps. Incandescent Lamp Used with Solid Cap 05 5-volt volt
K Shapes 01 02 03 LB Housing Black ray Terminals Silver Solder Lug/ Quick Connect Terminals 01 TYPICAL INDICATOR ORDERIN EXAPLE DESCRIPTION FOR TYPICAL ORDERIN EXAPLE Clear Cap with Red Diffuser Incandescent
Complement to LB Pushbuttons LB Indicators TYPICAL INDICATOR ORDERING EXAMPLE LAMPS. Incandescent Lamp used with Solid Cap 05 5-volt volt
TYPICAL INDICATOR ORDERING EXAMPLE LB 01 G W01 5C 12 W01 SHAPES 01 02 03 K G HOUSING Black Grey TERMINALS Silver Solder Lug/ Quick Connect Terminals LAMPS Incandescent Lamp used with Solid Cap 05 5-volt
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
Distinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
Distinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
General Specifications
Series YB Short Body Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
General Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
Distinctive Characteristics
Standard Size Pushbuttons istinctive Characteristics Carefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available
General Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
General Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
General Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
General Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ /0V AC or A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
Distinctive Characteristics
Distinctive haracteristics arefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
General Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
General Specifications
Standard Size Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 3A @ 125V A or 3A @ 250V A or 3A @ 30V Logic Level (gold): 0.4VA maximum @ 28V A/ maximum (Applicable
YB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
Distinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
Indicator body single with two independent lamp bases, raised, rectangular, black plastic, screw terminals, without bezel. Part No
Series 03. mm x 4. mm IP40/IP65 0 A 400 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales
3 CE-Conformity. General information. Signal lamps. 3-2 Signal lamps
Signal lamps General information Signal Lamps with integral lamps/s The soldered lamps/s without base cannot be replaced. Signal Lamps with lamp socket An integral lamp socket allows replacement of lamps/s
JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS
Indicator Lights (Neon, LED and Filament Lamp)
Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Red, Amber, Green, Clear 100/130V (marked 110V), 200/250V (marked 230V) ED Red, Yellow, Green /2.2V Resistors for other voltages available
3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel
M2S. Indicator Series with Square 40-mm Body. Indicator (Square) List of Models
Indicator (Square) CSM DS_E_3_2 Indicator Series with Square 40-mm Body Same type of Indicator as those in the A3S-series Pushbutton Switch Easy panel mounting from the front and simple lamp replacement
Indicator Lights Neon, LED and Filament Lamp
Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White
IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
Micro Switch. NR SERIES ROCKER SWITCH 3-POSITION FLUSH-PANEL MOUNT, SCREW TERMINALS 1NR * Off 2-3* $24.58
Micro SEALED TOGGLE AND ROCKER SWITCHES A sealed switching chamber enables these toggle and rocker switches to comply with UL 508, paragraph 13.3 hosedown test. These switches survive where panels are
Q SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
Miniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
Table of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton
Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
Optolite Products. Press to Test Type Incandescent Miniature General Purpose Size T-1 ¾
tube and nuts, aluminum, black anodized per steel. Brass terminals, tin plated per per L-P-349. See Selection Guide. hole.500 in. ±015 in. dia. Approximately.4 oz. less lamp. 03-91080 Type General Purpose
HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
A3S. Pushbutton Switch Series with Square 40-mm Body. Lighted Pushbutton Switch (Square) List of Models
Lighted Pushbutton Switch (Square) CSM DS_E_7_ Pushbutton Switch Series with Square 40-mm Body Combines miniature design with distinct but soft sense of operation. Easy panel mounting from the front and
Y Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
SUPER-BRIGHT MULTI-CHIP LED SIGNAL LAMPS
SUPER-BRIGHT MULTI-CHIP LED SIGNAL LAMPS T-1-3/4 6V, 12V, 28V, 36V, 48V & 60V Multi-Chip LED Lamp Data Sheet : SEL-MCL-001-HB T-1-3/4 Midget Flanged Based T-1-3/4 Midget T-1-3/4 Bi-Pin T-1-3/4 Midget Grooved
Q22 series. Ø22 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q22-17-07 DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.8) solder lug/faston terminals,
Jay-El Mark 15 P/N 10732
Jay-El Mark 5 P/N 07 JAY-EL 07 JAY-EL MARK 5 P/N 07 ILLUMINATED SWITCH MEETS REQUIREMENTS OF MIL-S-885 Catalog No. 00G -0 For more information, contact our sales team at 0.5.700 or hmisales@ducommun.com
General Specifications
Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
General Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
Q19 series. Ø19 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q19-17-07 LED INDICATORS DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins
Rocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance
Rocker Switches Ultra thin rocker switch Ratings up to 15A, 250Vac Single and twin gang single: 17.4 x 6.8mm twin: 17.4 x 13.4mm Miniature rocker switch Ratings up to 15A, 250Vac High in-rush tolerance
Selection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
Q SERIES Ø16mm (.630") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification VOYC1603R1US Features 16mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
Indicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67
2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
IP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
Bright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
Q16 series. Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q16-17-07 LED INDICATORS DISTINCTIVE FEATURES Secret until lit polycarbonate decals or custom engraving 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs (2.8 x 0.8) solder lug/faston
Indicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
General Specifications
Series CK High Security Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 3A @ 50V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical
General Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
550-xx04. 5mm LED CBI Circuit Board Indicator Top View, Single x x Features. Custom For custom LEDs contact factory.
6.10 [.240] 5mm LED CBI Circuit Board Indicator Top View, Single 6.10 [.240] RECOMMENDED P.C. HOLE PATTERN A 3.43 [.135] for -0204 to -0404, 5.0 [.197] for all others B.635 [.025] for -0504 to -0704,.508
A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two
Push Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
The modular structure makes it possible to build at least 5 configurations for each visual lens unit
180 SERIES Modular visual and audible indicators A simple bayonet system simplifies the mounting and maintenance, which can be performed in complete safety The wiring unit can be easily reached and extracted,
LUMOTAST FK. General data. Content
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
M T R - 24D - P
Indicator M16 Cylindrical 16-dia. Indicator Same basic design as the A16 Pushbutton Switch. UL and cul approved (File No. E41515). Model Number Structure Model Number Legend Completely Assembled The model
IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS
Switches- and Indicators
Switches- and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices raised mounting... 7 Devices flush mounting... 9 Accessories... 11 Technical Data... 25 Drawings...
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
SIRIUS 3RU2 Thermal Overload Relays
Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to
C&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
General Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
L-Series Sealed Rocker Switches
L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative
CODED SWITCHES SPACERS PART NO. PART NO. SCREWS FOR FIELD ASSEMBLY OF THUMBWHEEL SWITCHES (2 screws needed per assembly nuts)
3P SERIES,.100 THK. (Makes section pitch.400 ) 663602000 663609000 3 SERIES FRONT MOUNT, FITS TYPE 0 & 3,.078 THK. (Makes section pitch 10mm) 410802000 410809000 3 SERIES REAR MOUNT, FITS TYPE 2,.150 THK.
Switches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
10 lighting. 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs
10 lighting 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs JULY LIGHTING 1 RECHARGEABLE METAL LED LAMP Art. No. 827.805300 Technical
Indicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order
Series 14.5 mm 0.5 mm IP67 5 50 V INDITOR pushbutton keylock selector buzzer hoose one component from each of the coloured sections to assemble a complete switch. Product Profile Indicator The Series 14
ø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
* Clear 12 Licence L 1 PC *704812B Clear 12 Licence L 10 PCS
Licence Lamps LED LICENCE LAMP TECHSPAN s LED Licence Lamp is made of a (black) polycarbonate housing with a clear lens, and contains long life LED diodes in a solid state circuit board. These lamps are
onlinecomponents.com
McGILL SWITCHES Contents Introduction......................................................................... 213 McGill Rocker Switches................................................................
Switches & Pilot Devices
ø16mm - 6 Series Key features: 5/8 (16mm) mounting holes ocking lever removable contact blocks Solder terminal or PB terminal options Available assembled or as sub-components Worldwide approvals Incandescent
New Bicolor Alternating Legends
Contact No. 17 New Bicolor KP01 & KP0, NP01 & UB eries KP01 & KP0 ERIE NP01 ERIE UB ERIE Blue LED Illumination Amber LED Illumination 013-07-05 eries KP, NP01, & UB Extensive Variety Bicolor LED Illumination
ø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
33mm Lug Nut Covers NEW PRODUCTS JULY
33mm Lug Nut Covers Material... Chrome Plastic or Chrome Steel Fits... Most trucks with 33mm lug nuts Unit & Package... Sold by each, bulk Patent... Pending (Hex flat top) Top view 10239 10237 & 10238
A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630" (16mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + Switchblock To order, select desired model numbers from tables below. Example:
INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.
INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
No. of Terminals. On-Off Screw 2 6 Amps 120 VAC, 3 Amps 240 VAC On-Off Wire Leads 2. Spade 1 21 Amps 14 VDC
Medium & ight-duty Toggle es Great for household appliances and equipment Bat toggle switch, 774007, is ideal for battery-powered equipment including trimmers and lawn mowers ire leads are #18 AG, 6 in.
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator
Control & Signalling Devices 22.5 mm. RoHS. Compliant
Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded