SUPER 248BDH WITH BRUSHES
|
|
- Chloe Strickland
- 5 years ago
- Views:
Transcription
1 SUPER 248BDH WITH BRUSHES PAGE DESCRIPTION NUMBER B 5..6 A.7..7 A & B B....15C B 17 Thru A Front Air Damper.. Back Air Damper.. Top Fan Shaft.. Top Air Discharge Auger Assembly.. Does Not Apply to This Manual Bottom Air Discharge Auger Assembly.. Brush Adjusting System. Brush Adjusting System. Does Not Apply to This Manual Rope Sheave Assembly. Brush Carrier Assembly Bottom Fan Shaft.. Bottom Counter Shaft Top Counter Shaft Eccentric Shaft.. Eccentric Shaft.. Does Not Apply to This Manual Adjustable Belt Take-Ups.. Bottom Fan Metal Air Trunk Assembly. Scalper Shoe Assembly.. Top Shoe Assembly.. Bottom Shoe Assembly Does Not Apply to This Manual General Parts.... General Parts....
2 Top Fan Section All 26 F Air Trunk Assembly Complete 5 3 F /16" X 85-3/4" Top Fanshaft 10 3 F /16" Bore Pillow Block Bearing 18 3 F High Static Fan Wheel Assembly with 10" Wide Blade F Right Side Top Fan Housing Assembly ( Includes 2 Sides & Metal) F Left Side Top Fan Housing Assembly( Includes 2 Sides & Metal) 15 1 F Top Fan Bleeder Inlet Slide Assembly 12 1 F Adjusting handle & Crank (28" Long for top air) 4 1 F Adjusting handle shaft Bearing 1 F Hand Crank Handle with wood Knob 17 1 F Front Air Damper with End Castings 1 F Valve Control Assy Complete ( Includes 1 Each Below) 1 1 F Universal Joint 9 1 F " Threaded Screw Shaft with 5/8" Shank 13 1 F Swivel Plate (bolts to wood side) ** 1 F Plain Pivot Nut 14 1 F Swivel Arm Pivot Lever ** 1 F Threaded Pivot Nut **Refers to the previous listing number. May give parts within that assembly, right side-left side numbers, or numbers for parts that are specific to RH or LH machines. Note: Front of the Machine is Where the Screens are Insertsed Into the Machine. Discharge Spouts are Determined by Standing at the Front and Facing the Machine. Right Hand Discharge Spouts Would Discharge Towards Your Right Hand.
3 TOP AIR DISCHARGE AUGER ASSEMBLY 4 B F Complete Auger Assembly for Right Hand Discharge(Parts Below) B F Shaft with Flighting 84" for Right Hand All 4 B F Complete Auger Assembly for Left Hand Discharge(Parts Below) B F Shaft with Flighting 84" for Left Hand B F End Flipper Valve B /16" Bore Flangette Stamping B F /16" Bearing Insert BOTTOM/BACK SETTLING AUGER ASSEMBLY 31 6 A F Complete Auger Assembly for Left Hand Discharge(Parts Below) 28 6 A F Shaft with Flighting 83" for Left Hand Discharge Machine 31 6 A F Complete Auger Assembly for Right Hand Discharge(Parts Below) 28 6 A F Shaft with Flighting 83" for Right Hand Discharge Machine 36 6 A F /16" Bore Flangette Stamping 37 6 A F /16" Flangette Bearing SHOE DISCHARGE AUGER ASSEMBLY 31 6 A F Complete Auger Assembly for Left Hand Discharge(Parts Below) 28 6 A F Shaft with Flighting 83" for Left Hand Discharge Machine 31 6 A F Complete Auger Assembly for Right Hand Discharge(Parts Below) 28 6 A F Shaft with Flighting 83" for Left Hand Discharge Machine 36 6 A F /16" Bore Flangette Stamping 37 6 A F /16" Flangette Bearing F Tooth Drive Sprocket with 1-3/16" Bore F #41 Roller Chain (Specify Amount) F #41 Chain Idler Sprocket Assembly
4 BRUSH ADJUSTING SYSTEM For Scalper Screen 39 Not Available 1 Brush Adjust/ Control Side Left Hand Side (Top Scalper Screen) 39 7 F Brush Adjust/ Control Side Right Hand Side(Includes Below) 42 7 F Adjustments Handle with Spring 42A 7 F Shoulder Bolt for Brush Adjusters (Both Sides) 38 7 F Brush Adjusters - Idler Side (Left Hand Side) ** 7 F Brush Adjusters - Idler Side (Right Hand Side)(Includes Below) 43 7 F Idler Arm Support 43A 7 F Shoulder Bolt for Brush Adjusters (Both Sides) F Brush Carrier Assembly 25" x 22" with Rollers (Brushs not included) 10 F " Black Course Brushes F Brush Carrier Roller for 1-3/16" Shaft F Carrier Roller Axle with Hardware F Brush Carrier Shaft 1-3/16" X 68" For Top Screen In Each Main Shoe 39 7 A F Brush Adjust/ Idler Side Left Hand Side ** 7 A F Brush Adjust/ Idler Side Right Hand Side(Includes Below) 43 7 F Idler Arm Support 43A 7 F Shoulder Bolt for Brush Adjusters (Both Sides) 32 7 A F Brush Adjust/ Control Side Left Hand Side 32 7 A F Brush Adjust Handle/ Control Side Left Hand Side 32 7 A F Brush Adjust/ Control Side Right Hand Side 32 7 A F Brush Adjust Handle / Control Side Right Hand Side 47 7 A F Brush Carrier Assembly 25" x 46" with Rollers (Brushs not included) 10 F " Black Course Brushes 10 F " White Fine Brushes (Used on Wire Mesh Screens) F Rope Clamp Bracket F Brush Carrier Roller for 1-3/16" Shaft F Carrier Roller Axle with Hardware 35 7 A F Straight Brush Adjusting Connecting Bar 38" F Brush Carrier Shaft 1-3/16" X 68"
5 BRUSH ADJUSTING SYSTEM CONTINUED For Bottom Screen In Each Main Shoe 39 7 A F Brush Adjust/ Idler Side Left Hand Side ** 7 A F Brush Adjust/ Idler Side Right Hand Side(Includes Below) 43 7 F Idler Arm Support 43A 7 F Shoulder Bolt for Brush Adjusters (Both Sides) 32 7 A F Brush Adjust/ Control Side Left Hand Side 32 7 A F Brush Adjust Handle/ Control Side Left Hand Side 32 7 A F Brush Adjust/ Control Side Right Hand Side 32 7 A F Brush Adjust Handle / Control Side Right Hand Side 43A 7 F Shoulder Bolt for Brush Adjusters (Both Sides) 47 7 A F Brush Carrier Assembly 72" with Rollers (Brushs not included) 10 F " Black Course Brushes 10 F " White Fine Brushes (Used on Wire Mesh Screens) F Rope Clamp Bracket F Brush Carrier Roller for 1-3/16" Shaft F Carrier Roller Axle with Hardware 36 7 A F Bent Brush Adjusting Connecting Bar 38" F Brush Carrier Shaft 1-3/16" X 68" ** 9 F Rope Sheave Assembly Complete (Includes 1 Each Below) 46 9 F " Rope Sheave Only with Bushing 50 9 F Rope Sheave Axle with Hardware 40 9 F Rope Sheave Bracket Only 41 9 F One Hole Plate with 1-5/8" Bore 51 9 F Jack Plate F Jack Plate F Wirelon Plastic Coated Cable (In Feet) Note: Front of the Machine is Where the Screens are Insertsed Into the Machine. Discharge Spouts are Determined by Standing at the Front and Facing the Machine. Right Hand Discharge Spouts Would Discharge Towards Your Right Hand.
6 BOTTOM FAN ASSEMBLY F Fan Shaft 1-1/2" X 81" (Includes Keys) F /8" X 5" Keys F /2" Pillow Block Bearing F Bridgetree Mounting Angle for Bearing F " Diameter 1-1/2" Bore Stationary Disc F " Diameter 1-1/2" Bore Spring End Disc F " Heavy Duty Spring F Hand Nut for 1-1/2" Shaft 13 B F ATF 34 Variable Air Regulator Belt F Tapered Fan Entry Cones A F Bottom Drum Iron 57-5/8" x 88" A F Discharge Chute 4" A F Breast Iron 57-5/8" x 24-1/2" ** 12 F Bottom Fan Assembly Complete( includes 60,63 & Bolts) F Wooden Fan Blade 59-5/8" F Spider Fan Arm 1-1/2" Bore BOTTOM COUNTERSHAFT ASSEMBLY B F Countershaft 1-1/2" X 85-1/2" ( Includes Keys) F /8" X 5" Keys B F /2" Pillow Block Bearing B F Pillow Block Bearing Complete w/bearing ** 14 B F /2" Bearing Only for 7475 Bearing B F " Diameter 1-1/2" Bore Stationary Disc B F " Diameter 1-1/2" Bore Thrust End Disc B F B-34 Thrust Bearing B F /2" Adjusting Nut (Includes Zerk with Plug) F Zerk with Plug for Adjusting Nut Note Drive Sheaves Listed in Back
7 TOP COUNTERSHAFT ASSEMBLY 73 14B F Countershaft 1-1/2" X 85-1/2" ( Includes Keys) 84 14B F /8" X 5" Keys 76 14B F /2" Pillow Block Bearing 74 14B F Pillow Block Bearing Complete w/bearing ** 14B F /2" Bearing Only for 7475 Bearing 79 14B F " Diameter 1-1/2" Bore Stationary Disc 78 14B F " Diameter 1-1/2" Bore Thrust End Disc 75 14B F B-34 Thrust Bearing 77 14B F /2" Adjusting Nut (Includes Zerk with Plug ) F Zerk with Plug for Adjusting Nut NOTE: On Some Super 248BDH's 9" had discs on the Countershaft Shaft Assembly 77 14B F /2" Adjusting Nut(Includes Zerk with Plug #24) 75 14B F B-34 Thrust Bearing F Zerk with Plug for Adjusting Nut 78 14B F " Diameter 1-1/2" Bore Thrust End Disc 79 14B F " Diameter 1-1/2" Bore Stationary Disc with Set Screws SCLAPER ECCENTRIC SHAFT ASSEMBLY F Scalper Eccentric Shaft 1-1/2" x 75" F /2" Pillow Block Bearing F " Diameter 1-1/2" Bore Spring End Disc F " Diameter 1-1/2" Bore Stationary Disc with Set Screws F " Spring F Hand Nuut F /2" Throw Eccentric Assembly Complete 3/8" (Includes Below) ** F Bearing Insert for Eccentric Assembly ** F /2" Bore 3/8" Throw Eccentric Hub ** F Eccentric Housing for Assembly OR F " Diameter 1-1/2" Bore Spring End Disc F " Diameter 1-1/2" Bore Stationary Disc with Set Screws
8 F " Spring F Hand Nuut TOP ECCENTRIC SHAFT ASSEMBLY 85 15C F Eccentric Shaft 1-1/2" X 88-1/2" (Include Keys) 15C F /8' x 5" Square Keys F /8" x 1-1/4" Woodruff Keys /8" x 2" Square Keys C F Eccentric Cross Girt with Bearing Mounting Pads 89 15C F /2" Pillow Block Bearing C F " Flywheel 1-1/2" C F /8" Wood Pitman Arm / Right Hand Top C F /8" Wood Pitman Arm / Left Hand Top 92 15C F /2" Throw Eccentric Assembly Complete (Includes Below) ** F Bearing Insert for Eccentric Assembly ** F /2" Bore 1/2" Throw Eccentric Hub ** F Eccentric Housing for Assembly BOTTOM ECCENTRIC SHAFT ASSEMBLY B F Eccentric Shaft 1-1/2" X 75-1/2" ( Includes Keys) B F Eccentric Cross Girt with Bearing Mounting Pads B F /2" Pillow Block Bearing B F /4" Wood Pitman Arm / Right Hand Top B F /4" Wood Pitman Arm / Left Hand Top B F /2" Throw Eccentric Assembly Complete (Includes Below) ** F Bearing Insert for Eccentric Assembly
9 ** F /2" Bore 1/2" Throw Eccentric Hub ** F Eccentric Housing for Assembly SCALPER SHOE ASSEMBLY & 27 F Scalper Shoe Assembly Complete F Scalper Shoe Wood Side Right Hand F Scalper Shoe Wood Side Left Hand F Bottom Blankway Liner Right Hand F Bottom Blankway Liner Left Hand F Shoe Bottom Metal 55-1/2" x 32"" F Screen Blank F Eccentric Drive Bearing Plate with Keyway F Eccentric Drive Bearing Plate without Keyway F Pitman Shoe Drive Shaft F Canvas Apron Assembly F Metal Screenway Liner Right Hand F Metal Screenway Liner Left Hand F Metal Rubber Holding Strip (Customer to Cut to Length) F /2" Rubber Seal (In Feet) F Screen Stop Right Hand F Screen Stop Left Hand F Screen Hook Assembly F Back Hanger Plate Weldment F Left Hand Front Hanger Plate Weldment F Right Hand Front Hanger Plate Weldment F " Heavy Duty Hanger Assembly with Needle Bearing ** F MR 20 Needle Beaing (Included in Above) F Inner Race F Millside Hanger Bracket with Sliding Stub Shaft 27 F Quick Change Flow Assembly Note: Front of the Machine is Where the Screens are Insertsed Into the Machine. Discharge Spouts are Determined by Standing at the Front and Facing the Machine. Right Hand Discharge Spouts Would Discharge Towards Your Right Hand.
10 TOP SHOE ASSEMBLY All 28 F Top Shoe Assembly Complete Right Hand All 28 F Top Shoe Assembly Complete Left Hand F Right Shoe Side Wood Only ** 28 F Left Shoe Side Wood Only 28 F Shoe Bottom Metal 55-1/2" x 32" 28 F Shoe Bottom Metal 55-1/2" x 22" 28 F Shoe Bottom Metal 55-1/2" x 35" F /4" Metal Screenway Liner F /4" Metal Screenway Cap F " Metal Rubber Holding Strip F " Metal Screenway Liner F " Metal Screenway Cap F " Metal Rubber Holding Strip F /2" Rubber Seal (In Feet) F Pitman Angle F Pitman Inside Support Plate F Screen Stop F Screen Hook Assembly F Straw Spout (Both Right or Left Hand) F Back Hanger Plate Weldment Left Hand F Back Hanger Plate Weldment Right Hand F Front Hanger Plate Weldment Left Hand F Front Hanger Plate Weldment Right Hand F " Heavy Duty Hanger Assembly with Needle Bearing ** F MR 20 Needle Beaing (Included in Above) F MI 16 Inner Race
11 Note: Front of the Machine is Where the Screens are Insertsed Into the Machine. Discharge Spouts are Determined by Standing at the Front and Facing the Machine. Right Hand Discharge Spouts Would Discharge Towards Your Right Hand. BOTTOM SHOE ASSEMBLY F Bottom Shoe Assembly Complete Right Hand F Bottom Shoe Assembly Complete Left Hand F Right Shoe Side Wood Only F Left Shoe Side Wood Only 29 F Shoe Bottom Metal 55-1/2" x 35" 29 F Shoe Bottom Metal 55-1/2" x 32" 29 F Shoe Bottom Metal 55-1/2" x 48" F /2" Metal Screenway Liner F " Metal Rubber Holding Strip F /4" Metal Screenway Cap F /2" Rubber Seal (In Feet) F " Metal Screenway Liner F " Metal Rubber Holding Strip F " Metal Screenway Cap F /2" Rubber Seal (In Feet) F Pitman Angle Bracket 15-3/16" F Pitman Inside Support Plate F Screen Hook Assembly F Left Hand Back Hanger Plate Weldment F Right Hand Back Hanger Plate Weldment F Left Hand Front Hanger Plate Weldment F Right Hand Front Hanger Plate Weldment F " Heavy Duty Hanger Assembly with Needle Bearing ** F MR 20 Needle Beaing (Included in Above) F MI 16 Inner Race F Straw Spout (Both Right or Left Hand) F Spout Track F Canvas Apron Assembly
12 Note: Front of the Machine is Where the Screens are Insertsed Into the Machine. Discharge Spouts are Determined by Standing at the Front and Facing the Machine. Right Hand Discharge Spouts Would Discharge Towards Your Right Hand. PULLEYS & BELTS F B-97 Belt (From Top Countershaft to Top Fan) F B12.4 SK Countershaft Sheave (Is Driven By Top Fan Shaft) SK Bushing for above F B6.4 SK Top Fan Sheave (Drives Countershaft Shaft) SK Bushing for above F B-136 Belt (From Top Countershaft to Bottom Countershaft) F B5.2 SD Countershaft Sheave ( Top Countershaft) SD Bushing for above F B5.2 SD Countershaft Sheave ( Bottom Countershaft) SD Bushing for above F B-120 Belt (From Top Countershaft to Hopper) All 24 F Belt Idler Assembly Complete with 5-1/2" Stub Shaft B3.4 SH Sheave (Drives Hopper) SH Bushing for above 1-1/2" Bore " Hopper Sheave (F Right H or F Left H) F B-90 Belt (From Top Countershaft to Top Auger Discharge) All 24 F Belt Idler Assembly Complete with 5-1/2" Stub Shaft F B3.6 SH Top Countershaft Sheave (Drives Top Auger) SH Bushing for Above Sheave 1-1/2" Bore 32 F B18.4 SK Valve Shaft Sheave ( Is Driven by Countershaft ) SK Bushing for Sheave 1-3/16" Bore F B-133 Belt (From Top Auger Discharge to Shoe Discharge Auger) 193 All 24 F Belt Idler Assembly Complete with 5-1/2" Stub Shaft F B9.4 SDS Sheave (Top Air Discharge,Drives Shoe Discharge Auger ) SDS Bushing for Above Sheave 1-3/16" Bore F B6.8 SDS Sheave (Shoe Auger Discharge ) SDS Bushing for Above Sheave 1-3/16" Bore F Tooth Timing Sprocket (Eccentric Shafts) F Chain Idler Assembly Complete ** 32 F Tooth Idler Sprocket F #50 Roller Chain (In Feet)
13 PULLEYS & BELTS CONTINUED F B-136 Belt (From Bot Countershaft to Bot Auger Discharge All 24 F Belt Idler Assembly Complete with 5-1/2" Stub Shaft B7.4 SDS Bot Countershaft Sheave SDS Bushing for Above Sheave 1-1/2" Bore 32 F B15.4 SK Valve Shaft Sheave ( Is Driven by Countershaft ) SK Bushing for Sheave 1-3/16" Bore MISCELLANEOUS PARTS F Back Let Down Spout F Catchall Discharge Spout with Hardware F Catchall Support Angle F Front Let Down Spout F Right Side Let Down Spout Hanger F Left Side Let Down Spout Hanger
14 The Following Are the Ball Tray Kit Parts That were Installed on the Super 248BDH Cleaners in the Past Old Style Ball Trays with 1" Square Turkey Wire That Came Out With the Screens F Ball Tray Weldment for 2 Piece Screens (For Bottom 26" Section) F Ball Tray Weldment for 2 Piece Screens (For Top 34" Section) F Black 1-3/8" Balls ( 72 Per Tray) F Ball Tray Support Rail 59-1/2" F Ball Tray Support Rail 44" F Ball Tray Support Rail 26" F Ball Tray Support Rail 65" New Style Permanent Ball Trays with That Stayed in the Machine When the Screens Were Removed. Started to be Used in1994 F Permanent Ball Tray Weldment F Permanent Ball Tray Weldment (Top Scalper) F Ball Tray Blank F Black 1-3/8" Balls ( 80 Per Tray) F Right Hand Ball Tray Rail w/ Screen Hook Holder Bracket F Left Hand Ball Tray Rail w/ Screen Hook Holder Bracket F Right Hand Ball Tray Rail w/ Screen Hook Holder Bracket 52" F Left Hand Ball Tray Rail w/ Screen Hook Holder Bracket 52" F Right Hand Ball Tray Rail w/ Screen Hook Holder Bracket 34" F Left Hand Ball Tray Rail w/ Screen Hook Holder Bracket 34" F Screens Hook Assembly
SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER
SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING PAGE GROUP DRAWING NUMBER..1...2...3..4....5 & 6..7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24..25..26.27 Thru 29...30A.31 Thru 32...33
More informationSUPER 49B SET UP WITH BR PAGE NUMBER
SUPER 49B SET UP WITH BR PAGE NUMBER..1...2...3..4....5 & 6..7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24...25A..26.27 Thru 29...30.31 Thru 32...33 ITEM PAGE PART NO. NO. NUMBER QTY. All 26
More informationSUPER 47A CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER
SUPER 47A CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING PAGE GROUP DRAWING NUMBER.1 Thru 6.. 7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24.25 Thru 29..30A.31 Thru 32...33 Brush Adjusting
More informationUniversal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown
Universal Platform 282 Model Section 5 Platform Parts Breakdown... 2-3 Retractable Finger Auger Parts Breakdown... 4-5 Combine Pickup Head Parts Breakdown... 6- Return to this page by clicking the upper
More informationUniversal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationUniversal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationTwin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...
Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationAllCropHarvester.com. New/New Old Stock List as of 03/04/2016
AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationCOUNTER SHAFT NUT LOCKING PLATE 1 $ HOIST DRUM CLUTCH EYE BOLTS 1 $ LEFT DRUM CLUTCH THREADED PIN 2 $ 138.
1 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 2 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 3 3331 REAR DRUM BRAKE RETURN SPRING 5 $ 51.31 5 10285 LEFT REAR DRUM BRAKE AIR CAN REACH ROD ( LONG ROD ) 1 $ 85.12
More informationPart s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)
Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0
More informationCombine Pickup Heads
Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of
More informationTel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM.
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD, VARIABLE SPEED PULLEY 1250 O.S. - 1/2 Shaft P-1629 1250 N.S. - 5/8 Shaft P-1649 V-BELTS 35 Motor to printing head P-4904 33 Pump
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationWorldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number:
Parts Catalog R Commercial / Residential 33 Mower Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE 68310 Toll Free Number: 1-800-267-4255 Table of Contents Table of Contents
More informationS/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
More informationCombine Pickup Heads
Combine Pickup Heads 164 Model Section 3 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More informationPIÈCES DÉTACHÉES. Chasse-neige. Révision 10/
PIÈCES DÉTACHÉES Chasse-neige 555 860 Révision 10/2004 Y v a n B é a l - 2 1, a v. d e l A g r i c u l t u r e - B. P. 1 6 Z. I. d u B r é z e t - 6 3 0 1 4 C l e r m o n t - F e r r a n d C e d e x 2
More informationCombine Pickup Heads
Combine Pickup Heads 124 Model Section 1 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More informationModels 642E, 642F, 662E, 644E, 664F, & 6A4E
Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock
More informationINFEED HOPPER COMPONENTS. Parts may not be exactly as shown. Bandit. Copyright 1/12
INFEED HOPPER COMPONENTS 80 INFEED HOPPER COMPONENTS 1. 626-200019 Folding Pan for Infeed Hopper 2 a. 900-4901-83 Folding Pan Spring Lock & Trap Door Lock b. 900-7900-93 Black Rubber Cap (Not Shown) 3
More informationKOMATSU GRADER AND DOZER SPARE PARTS
KOMATSU GRADER AND DOZER SPARE PARTS S.No Part Number Part Name Price 1 01084-02055 BOLT 2 01084-02070 BOLT 3 01530-03610 NUT 4 01531-08516 NUT 5 01580-12419 NUT 6 01582-11210 NUT 7 01582-11411 NUT 8 01582-12016
More informationCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
More informationMODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
More informationTEREX Woodsman 730 BRUSH CHIPPER
Woodsman 730 BRUSH CHIPPER Parts Manual Customer Dealer S/N Frame # Date Woodsman 150 Commerce Drive, Farwell MI 486 Phone: (800) 953-553 Fax: (989) 588-487 Flipper Discharge Chute Hand Crank Belt Shield
More informationRetriever 5100G/P. 11/89 revised 10/02 FORM NO
Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216
More informationB190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly
245-315B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly 245-315B190 8 H.P. Lawn Vacuum (1995) Page 2 of 22 Chute Assembly Ref # Part Number Qty S/P/F Description 1 681-0068 1 S CHUTE ASSEMBLY
More informationItem No. Part Number Description Qty
36 Frame Assembly 1 336-001 Hood 36" 1 2 100-009 Saucer Nut 4 3 300-001 Rear Deck Weldment 1 4 200-006 Nylon Nut M10 GB889-86 9 5 200-003 Hexagon Bolt M10*25 GB5783-86 12 6 100-007 Chute Deflector 1 7
More informationParts for Arbor Shaft Assembly
Parts for Arbor Shaft Assembly ITEM PART DESCRIEPTION 1 P110715 Key, 3/8 x 2-3/4 2 P416808 Arbor nut RH thread 3 P110640 Bushing SK x 1-11/16 888-634-4289 (14, 18, 20, 26 ) 4 P111022 Sheave 6 GR - 3V-
More informationREPAIR PARTS SNOW THROWER -- MODEL NUMBER PR5524ESNHL ( ) AUGER HOUSING / IMPELLER ASSEMBLY
REPAIR S SNOW THROWER -- MODEL NUMBER PRESNHL (9900700) AUGER HOUSING / IMPELLER ASSEMBLY 7 0 7 9 0 9 7 0 (EXPLODED) 9 0.07.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm 0 REPAIR
More informationCYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More information3 X2 4 X2 9 X1 6 DETAIL A H1064XT
HXT AUGER, BASE MODEL, HXT 11 A 9 1 DETAIL A ITEM NO. PART NO. DESCRIPTION QTY 1 0 CLAMP, /" CABLE, ZINC 9 CLAMP, 1/" CABLE 1 CABLE, TRUSS, /" X 1FT, HXT 1 CABLE, WING, 1/" X 0FT, HXT PBH01 HOPPER ASM,
More informationMODEL S-32, 3200, ALL AMERICAN
MODEL S-32, 3200, ALL AMERICAN 1. 1 3201-7001 Chassis Weldment 2. 1 3204-7010 Bell Crank Weld 3. 1 3204-7009 Seconday Lift Weld 4. 1 3204-2018 Primary Lift Arm 6. 1 340-3025-S0 Seat Spring 6. 3 847-2803
More information@ I::E SPAREPARTS ~) \ \\ \ // \\ 74. Prod. no: Engine: Tecumseh HMSK T Ref. No. Ref. No. Ref. No. Part. No.
9 @ I::E - Prod no: 9688702-0 SPAREPARTS Engine: Tecumseh HMSK 00-59243 T 072654-6 ~) \ \\ \ //7 57 \\ 74 Ref No Part No Ref No Part No, Ref No Part No 5335803-9 Clutch handle R,H 28 55470-7 5/ 6 flat
More informationPR6R24 ILLUSTRATED PARTS LIST MODEL NUMBER: SNOW THROWER
IMPORTANT MANUAL Do Not Throw Away ILLUSTRATED S LIST MODEL NUMBER: PRR SNOW THROWER WARNING: Read the Owner's Manual and fol low all Warnings and Safety In struc tions. Fail ure to do so can result in
More informationPM25 & PM35 GRINDER MIXER ILLUSTRATED PARTS LIST
PM25 & PM35 GRINDER MIXER ILLUSTRATED PARTS LIST Art s-way Manufacturing Co., Inc. 485140 1100 TO THE OWNER Congratulations on the purchase of your new Art s-way grinder mixer. You have selected a top
More informationB B B
FIG CYLINDER Suzuki Worldwide Motorcycle-ATV Page: of -0B00-00 0-00 0-000 0-00 0-0B0-0B0 0-0 0-0 Head, Cylinder Gasket, Cylinder Head Spark Plug (ngk,bphs) Spark Plug (nd,wfp-u) Cylinder Gasket, Cylinder
More information13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
More informationCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
More informationParts Description 2 1/2 Ton Multi-Fuel Part Number NSN
Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN Filter, M49C Fuel Tanker 4330-00-983- CP20452-0 0998 Tube, M49C Fuel Tanker Pickup Element, Air cleaner 2940-00-804-10912373 7898 Cable, Engine Stop
More informationHUDSON CHASSIS PARTS LIST
1940-1951 HUDSON CHASSIS PARTS LIST 5 HUDSON CHASSIS PARTS - 1940-1951 Front Suspension See Fig. 1 1 - Upper Support Arm & Pivot Assembly 159728-1940, 1941, first type 1942 (forged piece) (R.H.). 159729-1940,
More informationESSEX SUPER-SIX PARTS LIST JULY " Car Serial No and Upward 119" Car Serial No and Upward First Motor No
ESSEX SUPER-SIX PARTS LIST JULY 9 " Serial 7 and Upward 9" Serial 0000 and Upward First Motor No 055 HUDSON MOTOR CAR COMPANY DETROIT, MICHIGAN, U. S. A. Printed in U. S. A. ESSEX SUPER-SIX PARTS LIST
More informationETON America PARTS CATALOG. Matrix R4-150
ETON America PARTS CATALOG w.getitparts.com Matrix R4-50 www.getitparts.com Parts and drawing are subject to change without notice. ETON America reserves the right to substitute parts that have engineering
More informationREPAIR PARTS SNOW THROWER - - MODEL NO. PR827ES ( ) AUGER HOUSING / IMPELLER ASSEMBLY
REPAIR PARTS SNOW THROWER - - MODEL NO. PR8ES (00000) AUGER HOUSING / IMPELLER ASSEMBLY (x) (x) 0.0.00-A 0X8 AUGER HOUSING 0X SCRAPER BAR 00 CARRIAGE BOLT / 8 X. NUT / 8 0.0.0-B 08 AUGER BEARING BEARING
More informationSERIAL NUMBERS
J.E. LOVE COMPANY TREE SEEDLING HARVESTER SERIAL NUMBERS 103-114 FORESTRY PRODUCTS GROUP P.O. BOX 188 GARFIELD, WA 99130-0188 PHONE: (509) 635-1321 FAX: (509) 635-1434 Manufacturers of Special Harvesting
More informationPR624ES OWNER'S MANUAL MODEL NUMBER: SNOW THROWER
IMPORTANT MANUAL Do Not Throw Away OWNER'S MANUAL MODEL NUMBER: PRES SNOW THROWER WARNING: Read the Owner's Manual and fol low all Warnings and Safety In struc tions. Fail ure to do so can result in serious
More informationSECTION 7: PARTS LIST FOR MODEL 5KL
SECTION 7: PARTS LIST FOR MODEL 5KL 3 9 4 5 6 7 0 4 3 5 3 34 9 8 5 6 7 8 3 30 3 4 5 0 9 8 6 7 5 7 68 40 5 5 7 39 36 53 60 58 54 57 58 59 48 50 49 45 46 4 44 4 6 35 6 65 63 64 66 67 47 0 Model 5KL. 73-0447A
More informationSno-Thro. Parts Manual. Models ST624E A 8/10 Printed in USA
Sno-Thro Parts Manual Models 920001 - ST62E 0199100A 8/10 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More informationView Catalogs Online at
Catalog ML125-5 2015Edition ML125-5 Frame Parts 12551-1 Grip, LH 12551-2 Clutch Lever Comp. 12551-3 Handlebar Switch, LH 12551-4 Rearview Mirror, LH 12551-5 Rearview Mirror, RH 12551-6 Handlebar Switch,
More informationCYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
More information215E. Operator and Parts Manual MM158
5E Operator and Parts Manual MM58 This manual is furnished with each new TENNANT Model 5E This manual consists of Specifications; Operation; Maintenance; Appendix; the How To Use This Manual; Low Dump
More informationTray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts
14.0 INTRODUCTION Tray Box Former This section lists and illustrates the replaceable assemblies and parts of the Tray Box Former as manufactured by Each parts list contains the component parts for that
More informationNOTE: Order parts by Catalog Number Only. DO NOT order by Reference Number.
K-C/K-R Cage Machine Transportation Cart Assembly 0 NOTE: Order parts by Catalog Number Only. Ref. No. 0 Catalog No. 00 000 0 0 0 0 0 00 0 0 0 0 0 Description Cart Assembly Hex Nut /" () Lock Washer /"
More informationSection K WC1335 AND WC15 SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE INDEX
INDEX Section K WC33 AND WC SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE Description Page WC33 basic conveyor... K2-3 WC basic transfer... K4- WC70 basic tube... K-7 WC80 basic tube... K8-9 WC90 basic
More informationPart s Catalog. LX420 & LX460 Lawn Tractors. Model No. 13AX60RG744 Model No. 13AX60RH744
Part s Catalog For Parts Call 0-- or 0-- LX0 & LX0 Lawn Tractors Model No. AX0RG Model No. AX0RH Original Instructions (EN) -0 (0//0) Models X0RG & X0RH --00 Turf Tire, 0 x.0 x -000-00 Rim,.0 x.0-0-0 Wheel
More informationView Catalogs Online at
ML125-5 Frame Parts 12551-1 Grip, LH 12551-2 Front Brake Lever Comp. 12551-3 Handlebar Switch, LH 12551-4 Rearview Mirror, LH 12551-5 Rearview Mirror, RH 12551-6 Handlebar Switch, RH 12551-7 Clutch Lever
More information=-=-===~-~", Speedex. Owners and Parts Manual for. Model 1732
-------------=-=-===~-~", Speedex Owners and Parts Manual for Model 1732 FRONT END tem Description Part No. 1. 4 x 12 tire 0041-2412 2. 4 x 12 tube 0041-1412 3. 1/2 x 20 cone nut 0914-3500 4. 4x 12 rim
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More informationCYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 JN6-11102-00-00 HEAD, CYLINDER.......... 1 2 JN6-11133-10-00. GUIDE, VALVE............ 2 3 JN6-11181-00-00 GASKET, CYLINDER HEAD... 1 4 95817-10070-00 BOLT, FLANGE............ 4 5 99530-14016-00
More informationSno-Tek TM. Parts Manual. Models
Sno-Tek TM Parts Manual Models 900 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up) 9009 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up)
More informationReproduction. Not for PARTS LIST. Models. Manual Part No
PARTS LIST Models Mfg. No. Description 1696063 ML761650, Murray 16.5TP 30" Dual Stage Snowthrower, CE (2011) Revision - Manual Part No. Rev. Date: 5/17/2011 Table Of Contents PRODUCT COMPONENTS PAGES
More informationOPTIONAL EQUIPMENT. Section F INDEX
INDEX Section F OPTIONAL EQUIPMENT Description Page Inclined hopper, H08-/ and H-/... F2- Straight hopper, SWH...F Swivel arc kit, A...F Wheel kit, H08-, H- and H1-...F Inclined hopper, S08-/, S-/ and
More informationPrinted from CyberCat-STIGA Section: GARDEN ELECTRICAL SYSTEM
Section: GARDEN ELECTRICAL SYSTEM Section: GARDEN ELECTRICAL SYSTEM 2312 2333 1 1 1134-3625-01 Harness 2 1 1134-3623-02.Interlock module 4 2 9849-8013-16 Screw 5 2 1134-3132-01 Cable holder 6 2 1134-3204-01
More information1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *
-I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw
More informationModel Series E6A5E, E645E & E665E
Model Series EAE, EE & EE 0. -0 Housing R.H. -0 Housing L.H.. 0-0 Hex Screw /- x.. -0A Spiral Axle -00A Spiral Axle. -0 Key. -0 Pin-Spiral. -0 Shaft-Worm. -0 Gear-Worm. -0 Collar-Thrust. -0 Plug 0. -0
More informationMODEL SUPER P Parts List
MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway
More informationMODEL NUMBER 12527HV PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED S LIST MODEL NUMBER HV PRODUCT NUMBER 00- MFG. ID. NUMBER 000 0 - Rev REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL HV (000), PRODUCT 00-0 0 0 (EXPLODED) 0.0.0-F NOTE: All
More informationLAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
More informationETON America PARTS CATALOG
ETON America PARTS CATALOG Yukon II CXL-50 Parts and drawing are subject to change without notice. ETON America reserves the right to substitute parts that have engineering changes that can alter the appearance
More informationCOMPACT STANDON ER32FS600VL ER36FS600VL ER36FS600VLCA
COMPACT STANDON PARTS MANUAL ER32FS600VL ER32FS600VLCA ER36FS600VL ER36FS600VLCA 2 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 401 N. COMMERCE STREET BEATRICE,
More informationMfg. No: P216020KWV, 21" 6 TP Steel Deck Series
Parts Manual Mfg. No: 7800557 P216020KWV, 21" 6 TP Steel Deck Series Copyright Briggs and Stratton. All Rights reserved 28-Sep-2018 Model Components Table Of Contents Page Accessory Recycling Kits..............................................................................
More informationPWC - 33
PWC - 33 WY33N13BS SPARE PARTS LIST Mower Assembly Caster Kit Ref.# Part# Description Ref.# Part# Description 1 3301010 Linchpin 11 B6182-12 Lock nut M12 2 B97.1-20 Washer 20 12 3301040 Caster Wheel Arm
More informationPARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated
More informationMODEL NUMBER 1830HV PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED S LIST MODEL NUMBER 0HV PRODUCT NUMBER 00- MFG. ID. NUMBER 000 0 0-0 AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL 0HV (000), PRODUCT 00-0 0 0 (EXPLODED) 0.0.0-F NOTE: All component
More information21" STEEL DECK WALK BEHIND COMMERCIAL MOWERS SERIES 19
Parts Manual for 21" STEEL DECK WALK BEHIND COMMERCIAL MOWERS SERIES 19 MODEL CP215519HV CP216019KWV CRP216019KWV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED.
More informationParts Manual. Model: 1550-D
Parts Manual Model: 550-D Covers 50-K-50TKZ8Y2-0250 through Sold & Serviced By: Contents Quick Order List... Hopper and Plastic...3 Push Beam and Sight Gauge...5 Engine Compartment...7 Hood Assembly...9
More informationDISCOUNT TRACTOR PARTS PH MASSEY FERGUSON 165 & 175 Wheel Tractors. Parts catalogue and price list
DISCOUNT TRACTOR PARTS PH 0800 872272 MASSEY FERGUSON 165 & 175 Wheel Tractors Parts catalogue and price list ALL PRICES PLUS GST & SUBJECT TO CHANGE Page 4 212 Engine cont. Top Gasket Set $60.84 Bottom
More informationReel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334)
Reel Mower TRM-0 Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationReel Mower TRM 5138 and TRM 7192
Reel Mower TRM and TRM Parts Manual Locke Turf 0 Highway E, Opp, Alabama () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing
More informationMODEL NO REPAIR PARTS FRAME
FRAME 37 FRAME Key No. Part No. Description 90 198573X479 COVER, BOTTOM 91 198574 SCREW, 1/4--20X.63 103 406364X008 IDLER ASSEMBLY, AUGER 105 198576 PIN, HAIR.38DIAX1.64LG 106 198580 PIN, CLEVIS 3/16 DIA
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrowers. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695821 (I1224E), 11.5TP 24" Dual Stage Snowthrower 1695842 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrowers Not for Reproduction
More informationVision 17B/BT. Section II Parts and Service Manual (78454B) CLARKE TECHNOLOGY Operator's Manual - Vision 17B/BT Page -23-
Vision 17B/BT Section II Parts and Service Manual (78454B) Operator's Manual - Vision 17B/BT Page -23- HOW TOO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION There isn't any solution flow. The solution
More informationREAR ENGINE RIDER EUROPEAN SERIES 22
Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING...4,
More informationParts Catalog. Commercial / Residential 28 Mower
Parts Catalog R Commercial / Residential 28 Mower Worldlawn Power Equipment, Inc. 422 Turnbull Canyon Road City of Industry CA 91744 Toll Free Number:1-866-9-Mowers(1-866-966-9377) CONTENT CONTENT Mower
More informationDescription. Copyright 2005 Suzuki Worldwide Motorcycle-ATV. All Rights Reserved.
LT0K (LT0K P) FIG GASKET SET Suzuki Worldwide Motorcycle-ATV Page: of 0 0-0 -00-0B0-0B0 -A0 -E00-000 -0B0 0-000 0-000 0-00 00-00 00-00 00-00 Gasket Set Gasket, Cylinder Head Gasket, Cylinder Gasket, Clutch
More informationHi Cap 54 Grain Cleaner
OWNER S MANUAL Hi Cap 54 Grain Cleaner PNEG-1147 Date: 3-1-02 PNEG-1147 SAFETY INFORMATION PLEASE READ WATCH FOR THIS SYMBOL! IT POINTS OUT IMPORTANT SAFETY PRECAUTIONS. IT MEANS, ATTENTION - BECOME ALERT!
More informationPower Max Commercial 1028 OHXE Snowthrower
Form No. 3415-768 Rev B Power Max Commercial 1028 OHXE Snowthrower Model No. 38806 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3415-768* B Ordering Replacement Parts
More informationTransLift TL 2550K Parts Manual
TransLift TL 2550K Parts Manual Tink, I nc. 2361 D urham Dayton H w y D urham, C A 95938 Toll Free 888-367-8465 Fax 530-895-0751 w w w.tink inc.co ṁ Table of Contents Full Assembly View... 2 Tank View...
More information33 COMPACT DISC Ref. No. Part Name Part Number
CONTENTS CONTENTS 33 COMPACT DISC Ref. Part Name Part Number 1 Tire & Rim 168025 2 Disc Axle 401036 3 Plastic End Cap (Pkg. 2) 504090 4 Sealed Bearings & Flanges 504125 5 Bearing Stand Bolt Pkg. (2-U-Bolts)
More informationDavis Equipment - Parts, Service & Sales. To set up an appointment with our team, call
Davis Equipment - Parts, Service & Sales Equipment Lines Davis Equipment Service & Repair Shop Davis Equipment Our service shop has been providing quality repairs and service of Case IH NH3 Toolbars, Tenders,
More informationLARGE FRAME REAR TINE TILLERS SERIES 2
Parts Manual for LARGE FRAME REAR TINE TILLERS SERIES 2 MODEL R5002B R5002R R8002B R8002BE RT5 RT5X RT8 RT8S McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision
More information