SUPER 49B SET UP WITH BR PAGE NUMBER
|
|
|
- Robert McCoy
- 5 years ago
- Views:
Transcription
1 SUPER 49B SET UP WITH BR PAGE NUMBER & Thru A.16 Thru A Thru Thru
2 ITEM PAGE PART NO. NO. NUMBER QTY. All 26 Not Available F F F F F F F F ** 1 F F F F F F F F F **Refers to the previous listing num right side-left side numbers, or nu machines. Note: Front of the Machine is Where Discharge Spouts are Determined by Right Hand Discharge Spouts Would
3 TOP AIR DISC ITEM PAGE PART NO. NO. NUMBER QTY. 21 ALL F F F ** F ** F F F NOTE: ASSEMBLY DOES N
4 BRUSH SCREEN ITEM PAGE PART NO. NO. NUMBER QTY F F F F F F F F F ** 7 F F F F F F F F F Not Available 2 ** 9 F F F F F F F F F F F F
5 BOTTOM FAN A ITEM PAGE PART NO. NO. NUMBER QTY F F Not Available 2 F Note: If housing is ba F F F F F F A F ** 12 F F F
6 ECCENTRIC (WITH COU ITEM PAGE PART NO. NO. NUMBER QTY A F Not Avaiable 2 ** F F F A F ** F A F A F A F A F A F A F A F ** F ** F ** F A F A F
7 MAIN SHOE ITEM PAGE PART NO. NO. NUMBER QTY Not Available F *** F F F F F F F F F F F F F F F F F F ** 30 F F F F F F F F F F F
8 MAIN SHOE ASSE ITEM PAGE PART NO. NO. NUMBER QTY F F ** 30 F F F F F F F F F F F F Note: Front of the Machine is Where Discharge Spouts are Determined by Right Hand Discharge Spouts Would F F F F F F
9 PULLEYS & Machines Without Va ITEM PAGE PART NO. NO. NUMBER QTY. F F F Not Available F *** Not Available 1
10 BD CLEANER PARTS RUSH SCREEN CLEANING GROUP DRAWING Front Air Damper.. Back Air Damper.. Top Fan Shaft Top Air Discharge Auger Valve. Does Not Apply To This Manual.. Brush Adjusting System. Does Not Apply To This Manual.. Rope Sheave Assembly. Brush Carriage Assembly. Bottom Fan Shaft.. Bottom Fan Shaft.. Does Not Apply To This Manual.. Eccentric Shaft.. Does Not Apply To This Manual.. Adjustable Belt Take-Ups.. Bottom Fan Housing Air Trunk Assembly. Does Not Apply To This Manual.. Rocker Assembly View. Does Not Apply To This Manual.. Bottom Shoe Assembly.
11 Top Fan Section DESCRIPTION Air Trunk Assembly Complete (Includes Below) Fan Shaft 1-15/16" X 64-1/4" 1-15/16" Pillow Block Bearing 6" Wide Hide Static Fan Assembly Right Side Top Fan Housing Assembly ( Includes 2 Sides & Metal) Left Side Top Fan Housing Assembly( Includes 2 Sides & Metal) Top Fan Bleeder Inlet Slide Assembly Adjusting Handle & Rod 32" Long (Includes Handle With Knob) Adjusting Handle & Rod 18" Long (Includes Handle With Knob) Hand Crank Handle with wood Knob Adjusting handle shaft Bearing Valve Control Assy Complete ( Includes Parts Listed Below) Universal Joint 6" Threaded Screw Shaft with 5/8" Shank Swivel Plate (bolts to wood side) Plain Pivot Nut Swivel Arm Pivot Lever Threaded Pivot Nut mber. May give parts within that assembly, umbers for parts that are specific to RH or LH e the Screens are Insertsed Into the Machine. y Standing at the Front and Facing the Machine. d Discharge Towards Your Right Hand.
12 CHARGE VALVE ASSEMBLY DESCRIPTION Complete Valve (9 wide)(shaft not Included) Top Valve Shaft 1" x 48" Hinged Gate Weldment (9 wide) Gate Board Gate Springs #9 Discharge Roll Assemlby with Flanges ( Around 30" Long) Measure Roll Length 1" Bore Flangette Stampings 1" Bearing NOT INCLUDE DRIVE SHEAVES OR SHAFT
13 N CLEANING SYSTEM DESCRIPTION Brush Adjusters-Control Side /Left Hand Side(Includes Parts Below) Brush Idler Plate Left Hand Adjustments Handle with Spring Shoulder Bolt for Brush Adjuster Brush Adjusters - Idler Side /Right Hand Side(Includes Parts Below) Brush Adjusting Plate Right Hand Idler Arm Support Shoulder Bolt for Brush Adjuster Brush Adjusters-Control Side /Right Hand Side(Includes Parts Below) Brush Idler Plate Right Hand Adjustments Handle with Spring Shoulder Bolt for Brush Adjuster Brush Adjusters - Idler Side /Left Hand Side (Includes Parts Below) Brush Adjusting Plate Left Hand Idler Arm Support Shoulder Bolt for Brush Adjuster One Hole Plate with 1-5/8" Bore Straight Jack Plate Jack Plates-Three Hole Right Hand Side Rope Sheave Assembly Complete (Includes Below) 3" Rope Sheave Only with Bushing Rope Sheave Axle with Hardware Rope Sheave Bracket Only Brush Carrier Assembly 18" x 46" NOTE: INCLUDES ROLLERS & AXLES BUT NOT BRUSHES Brush Carrier Roller for 1-3/16" Shaft Carrier Roller Axle with Hardware 49-1/2" Black Course Brushes 49-1/2" White Course Brushes(Used on Wire Screens Only) Brush Carrier Shafts 1-3/16" x 52" 2 Piece Cable Clamps Wirelon Plastic Coated Steel Cable (In Feet)
14 ASSEMBLY DESCRIPTION Fan Shaft 1-1/2" X 67" (Includes Keys) 3/8" X 5" Keys 6715 Halfmoon Bridgetree Housing with Bearing Bearing Insert Only for Above ad Items 72 & 62 must be substitued 1-1/2" Pillow Block Bearing Bridgetree Mounting Angle for Bearing 12" Diameter 1-1/2" Bore Stationary Disc 12" Diameter 1-1/2" Bore Spring End Disc 10-5/8" Heavy Duty Spring Hand Nut for 1-1/2" Shaft ATF 34 Variable Air Regulator Belt( 2-7/8" x 108") Bottom Fan Assembly Complete( includes 60,63 & Bolts) Wooden Fan Blades 43-5/8" Long Spider Fan Arms
15 C SHAFT ASSEMBLY UNTER WEIGHTS) DESCRIPTION Eccentric Shaft 1-1/2" X 66-1/2" (Includes Keys) 6714 Halfmoon Flange Bearing 1-1/2" Bearing Insert Only for Below 6714 Flange Bearing Conversion Kit 1-1/2" Pillow Block Bearing /2" Halfmoon Bearing Complete w/bearing 1-1/2" Halfmoon Bearing Insert Only for Above 12" Diameter 1-1/2" Bore Stationary Disc 12" Diameter 1-1/2" Bore Thrust End Disc 1-1/2" Adjusting Nut (Includes Zerk with Plug #24) B-34 Thrust Bearing Counterweight Ends Counterweight 11" 1-1/2" Throw Eccentric Assembly Complete (Includes Below) Bearing Insert for Eccentric Assembly 1-1/2" Bore 1/2" Throw Eccentric Hub Eccentric Housing for Assembly Pitman Left Side 24" Long Pitman Right Side 24" Long
16 E ASSEMBLY DESCRIPTION Bottom Shoe Complete with Rockers (Old Number F ) Right Shoe Side Left Shoe Side Pitman Board 3/4" x 7-1/2" x 45-1/8" Front Hanger with Block on Both Sides Shoeside Hanger Support Block Back Shoe Hanger with Block Wood Sand Spout Track (Cut to Length) Metal Sand Spout Guide Sand Spout Left Hand Machines (Check Measurements) Sand Spout Right Hand Machines (Check Measurements) Second Straw Spout Left Hand Machines (Check Measurements) Second Straw Spout Right Hand Machines (Check Measurements) Pinion Gear with 3/4" Bore 4" Long Rack Escutcheon Plate Tilting Rod 3/4" X 48-1/2" 3/4" Hex Nut Canvas Apron Assembly Top Rocker Assembly Complete (Parts for Rocker Below) Right Hand Wooden Rocker Arm Only Left Hand Wooden Rocker Arm Only 60" Metal Screenway Liner 60" Metal Rubber Holding Strip Rubber Seal 2-1/2" Wide Screen Stop Screen Hook Assembly Bottom Rocker Brace Top Pipe Girt Support Grain Stop Assembly with Rubber Rocker Adjusting Girt Rocker Pivot Cup
17 EMBLY CONTINUED DESCRIPTION Bottom Rocker Assembly Complete (Parts for Rocker Below) Right Hand Wooden Rocker Arm Only Left Hand Wooden Rocker Arm Only 60" Metal Screenway Liner 60" Metal Rubber Holding Strip Rubber Seal 2-1/2" Wide Screen Stop (New Style) Screen Hook Assembly Bottom Rocker Brace Top Pipe Girt Support Grain Stop Assembly with Rubber Rocker Adjusting Girt Rocker Pivot Cup Apron Assembly e the Screens are Insertsed Into the Machine. y Standing at the Front and Facing the Machine. d Discharge Towards Your Right Hand. Single Belt Idler Assembly Complete 5-1/2" (Includes Below) Idler Pivot Lever 5-1/2" Belt Take Up Shaft 1" Cast Iron Pillow Block Idler Sheave with Bushing Belt Tightner Axle with Hardware
18 & BELTS ariable Shoe Shake DESCRIPTION Motor to Top Fan 3B12.4 Top Fan Shaft Driven Sheave SK Bushing 1-15/16" 3B6.4 Top Fan Drive Motor Sheave SK Bushing for above Top Fan to Eccentric Shaft 2B5.4 Top Fan Drive Sheave SDS Bushing 1-15/16" 2B12.4 Eccentric Shaft Driven Sheave SK Bushing 1-1/2" B4.0 Brush Drive Pulley 1 1/2" B7.4 Auger Drive Pulley SDS Bushing 1" B4.0 Hopper Drive Pulley 1 1/2" See Hopper Parts List for Driven Pulley
SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER
SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING PAGE GROUP DRAWING NUMBER..1...2...3..4....5 & 6..7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24..25..26.27 Thru 29...30A.31 Thru 32...33
SUPER 47A CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER
SUPER 47A CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING PAGE GROUP DRAWING NUMBER.1 Thru 6.. 7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24.25 Thru 29..30A.31 Thru 32...33 Brush Adjusting
SUPER 248BDH WITH BRUSHES
SUPER 248BDH WITH BRUSHES PAGE DESCRIPTION NUMBER..1...2...3..4 B 5..6 A.7..7 A 8.9...10..11 & 12....13 B.... 14 B....15C.....16 B 17 Thru 23.24.25A.26 27 28.29... 30 31 32 Front Air Damper.. Back Air
Models 642E, 642F, 662E, 644E, 664F, & 6A4E
Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock
One Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Front Gauge Wheels Section 4 Model Years 1992 1994... 2-5 Model Years 1995 1996... 6-9 Model Years 1997 Present... 10-11 Front Gauge Wheel Divider 1992 Present...
Twin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...
Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised
MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown
Universal Platform 282 Model Section 5 Platform Parts Breakdown... 2-3 Retractable Finger Auger Parts Breakdown... 4-5 Combine Pickup Head Parts Breakdown... 6- Return to this page by clicking the upper
S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
Head Terminal Repair Parts. Hopper Repair Parts
Head Terminal Repair Parts #61686200 - Mild Steel 1 1 61685400 6" Lagged Roller 2 1 81498800 Head Terminal Weldment 3 2 03018900 Bearing 1 5/16" Flange 4 1 14979900 CRR 1 5/16" x 20 13/16" 5 2 12003000
Model Series E6A5E, E645E & E665E
Model Series EAE, EE & EE 0. -0 Housing R.H. -0 Housing L.H.. 0-0 Hex Screw /- x.. -0A Spiral Axle -00A Spiral Axle. -0 Key. -0 Pin-Spiral. -0 Shaft-Worm. -0 Gear-Worm. -0 Collar-Thrust. -0 Plug 0. -0
Part s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
AllCropHarvester.com. New/New Old Stock List as of 03/04/2016
AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.
1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *
-I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated
S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts
14.0 INTRODUCTION Tray Box Former This section lists and illustrates the replaceable assemblies and parts of the Tray Box Former as manufactured by Each parts list contains the component parts for that
SECTION 7: PARTS LIST FOR MODEL 5KL
SECTION 7: PARTS LIST FOR MODEL 5KL 3 9 4 5 6 7 0 4 3 5 3 34 9 8 5 6 7 8 3 30 3 4 5 0 9 8 6 7 5 7 68 40 5 5 7 39 36 53 60 58 54 57 58 59 48 50 49 45 46 4 44 4 6 35 6 65 63 64 66 67 47 0 Model 5KL. 73-0447A
72K850ZP PARTS MANUAL
7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL
Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN
Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN Filter, M49C Fuel Tanker 4330-00-983- CP20452-0 0998 Tube, M49C Fuel Tanker Pickup Element, Air cleaner 2940-00-804-10912373 7898 Cable, Engine Stop
Illustrated Parts List / / 924 SB
9SB Illustrated Parts List / 990000 / 9 SB AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL 9SBb (990000), PRODUCT 9 9 00-0 9 0 9 0 (EXPLODED) 9 0.0.00-B NOTE: All component dimensions given in U.S.
Page 1 of HP B&S Vanguard Engine
1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
Sno-Thro. Parts Manual. Models ST624E A 8/10 Printed in USA
Sno-Thro Parts Manual Models 920001 - ST62E 0199100A 8/10 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
Craftsman Snow Thrower Model PARTS LIST
Craftsman Snow Thrower Model 24.88955 11 13 3 26 24 9 1 18 54 6 25 15 20 23 16 5 14 1 55 9 4 4 28 8 30 2 5 56 35 36 46 3 39 50 53 43 38 48 52 42 51 41 40 49 4 44 31 45 31 21 29 34 9 19 10 32 22 26 Craftsman
Combine Pickup Heads
Combine Pickup Heads 164 Model Section 3 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
Models E640F, E660F, E6C0F & E660G
Models E0F, E0F, EC0F & E0G 0 0 0 0 0-0 Lock Jam Nut /- -0 Flat Idler -B Auger Idler Arm 0-0A Hex Cap Screw /- x.0-0 Shoulder Screw -0 Flat Washer,. x. x.0-0 Extension Spring -0 Hex Nut /- -00 Hex Nut
Combine Pickup Heads
Combine Pickup Heads 124 Model Section 1 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
Sno-Tek TM. Parts Manual. Models
Sno-Tek TM Parts Manual Models 900 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up) 9009 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up)
Part s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)
Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0
TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES
MODEL NO. 44220-60001 & UP FORM NO. 01-505-1741 Rev. A PARTS CATALOG TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES BASE & FRAME ASSEMBLY 1800-3 Part 1 92-4350 Frame - Topdresser 1 2 92-4364 Bracket
Universal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
PIÈCES DÉTACHÉES. Chasse-neige. Révision 10/
PIÈCES DÉTACHÉES Chasse-neige 555 860 Révision 10/2004 Y v a n B é a l - 2 1, a v. d e l A g r i c u l t u r e - B. P. 1 6 Z. I. d u B r é z e t - 6 3 0 1 4 C l e r m o n t - F e r r a n d C e d e x 2
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
Universal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
Illustrated Parts List
Illustrated Parts List Hydrostatic Lawn Tractor IMPORTANT: Read safety rules and instructions carefully before operating equipment. Warning: This unit is equipped with an internal combustion engine and
Illustrated Parts Manual
Illustrated Parts Manual 00 Series Snow Thrower Two Stage MTD LLC, P.O. BOX 331 CLEVELAND, OHIO 13-001 Printed In USA Form No. -033 (August 2, 200) Auger & Auger Housing 5 1 1 13 3 25 23 1 15 53 1 2 22
LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
I Illustrated Parts List 8024 ST (HU8024STA), Snow Thrower. Repair Parts Manual
Illustrated Parts List 00-09 I000 80 ST (HU80STA), 90 Repair Parts Manual Snow Thrower AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL NO. 80ST (HU80STA), PRODUCT NO. 9-0 8 9 9 0 9 0 8 9 8 8 8 9
KOMATSU GRADER AND DOZER SPARE PARTS
KOMATSU GRADER AND DOZER SPARE PARTS S.No Part Number Part Name Price 1 01084-02055 BOLT 2 01084-02070 BOLT 3 01530-03610 NUT 4 01531-08516 NUT 5 01580-12419 NUT 6 01582-11210 NUT 7 01582-11411 NUT 8 01582-12016
21" STEEL DECK EASY LINE EUROPEAN WALK MOWER
Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER MODEL ESPV21 ESPV211 McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee,
3 X2 4 X2 9 X1 6 DETAIL A H1064XT
HXT AUGER, BASE MODEL, HXT 11 A 9 1 DETAIL A ITEM NO. PART NO. DESCRIPTION QTY 1 0 CLAMP, /" CABLE, ZINC 9 CLAMP, 1/" CABLE 1 CABLE, TRUSS, /" X 1FT, HXT 1 CABLE, WING, 1/" X 0FT, HXT PBH01 HOPPER ASM,
521613x89A Garden Tractor (2001) Page 1 of 24 Blade Drive
521613x89A Garden Tractor (2001) Page 1 of 24 Blade Drive 521613x89A Garden Tractor (2001) Page 2 of 24 Blade Drive Ref # Part Number Qty Description 1 094607E701 Cover, Right Pulley 2 26X250 Screw 3 015X84
B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly
245-315B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly 245-315B190 8 H.P. Lawn Vacuum (1995) Page 2 of 22 Chute Assembly Ref # Part Number Qty S/P/F Description 1 681-0068 1 S CHUTE ASSEMBLY
Section K WC1335 AND WC15 SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE INDEX
INDEX Section K WC33 AND WC SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE Description Page WC33 basic conveyor... K2-3 WC basic transfer... K4- WC70 basic tube... K-7 WC80 basic tube... K8-9 WC90 basic
Item No. Part Number Description Qty
36 Frame Assembly 1 336-001 Hood 36" 1 2 100-009 Saucer Nut 4 3 300-001 Rear Deck Weldment 1 4 200-006 Nylon Nut M10 GB889-86 9 5 200-003 Hexagon Bolt M10*25 GB5783-86 12 6 100-007 Chute Deflector 1 7
CYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
Reproduction. Not for PARTS LIST. Models. Manual Part No
PARTS LIST Models Mfg. No. Description 1696063 ML761650, Murray 16.5TP 30" Dual Stage Snowthrower, CE (2011) Revision - Manual Part No. Rev. Date: 5/17/2011 Table Of Contents PRODUCT COMPONENTS PAGES
CYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
RIDE ON MOWERS Model # Mini Rider. Issue A.0 ECN Sept 2014 PB Ref #
RIDE ON MOWERS Model # Mini Rider ECN 11649 Contents Frame & Fender............... Page 3 Drive System................. Page 4 Seat & Electrical......... Page 5 Front End Steering.............. Page 6
Tel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM.
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD, VARIABLE SPEED PULLEY 1250 O.S. - 1/2 Shaft P-1629 1250 N.S. - 5/8 Shaft P-1649 V-BELTS 35 Motor to printing head P-4904 33 Pump
ILLUSTRATED PARTS LIST MODEL NUMBER 15530SB-LS PRODUCT NUMBER MFG. ID. NUMBER TH
ILLUSTRATED PARTS LIST MODEL NUMBER SB-LS PRODUCT NUMBER 00- MFG. ID. NUMBER 000-0.0.0 TH AUGER HOUSING / IMPELLER ASSEMBLY 0 0 (EXPLODED) 0.0.0-C NOTE: All component dimensions given in U.S. inches. inch
SERVICE SHEET 40" WALK-BEHIND POWER TROWEL MODEL FT40 WARNING
40" WALK-BEHIND POWER TROWEL WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing
Illustrated Parts List I Snow Thrower 8527STE (HL8527STE A), Repair Parts Manual
Illustrated Parts List 00-0 I000 Snow Thrower 8STE (HL8STE A), 9 Repair Parts Manual AUGER HOUSING / IMPELLER ASSEMBLY 8 9 0 9 0 8 9 8 8 8 0 0 8 9 8 0 0 0 AUGER HOUSING / IMPELLER ASSEMBLY 0 8- Washer,
PM25 & PM35 GRINDER MIXER ILLUSTRATED PARTS LIST
PM25 & PM35 GRINDER MIXER ILLUSTRATED PARTS LIST Art s-way Manufacturing Co., Inc. 485140 1100 TO THE OWNER Congratulations on the purchase of your new Art s-way grinder mixer. You have selected a top
LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,
MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
F L CHASSIS & HOOD
MODEL 40607x2A 06 CHASSIS & HOOD 3 2 3 4 6 7 8 9 0 2 4 8 9 2 26 27 28 29 3 3 34 3 37 38 40 42 43 44 4 46 47 49 70 2 MODEL 40607x2A CHASSIS & HOOD 69066 Seat 2 028x Cap, Push 0n 3 09407 Spring 4 26x9 Screw
REPAIR PARTS SNOW THROWER - MODEL NUMBER P10530ESA AUGER HOUSING / IMPELLER ASSEMBLY
SNOW THROWER - MODEL NUMBER P00ESA AUGER HOUSING / IMPELLER ASSEMBLY 9 9 0 9 0 9 9 0 0 9 9 9 0 9 0 0 SNOW THROWER - MODEL NUMBER P00ESA AUGER HOUSING / IMPELLER ASSEMBLY Bag, Weight Bracket, Weight Bag
REPAIR PARTS SNOW THROWER - MODEL NUMBER PP5524ESA AUGER HOUSING / IMPELLER ASSEMBLY
For Parts Call K&T 0-8-9 or 0--98 SNOW THROWER - MODEL NUMBER PPESA AUGER HOUSING / IMPELLER ASSEMBLY 8 9 9 0 9 0 8 9 8 8 8 9 0 0 8 9 9 9 8 0 9 0 0 For Parts Call K&T 0-8-9 or 0--98 SNOW THROWER - MODEL
ENCORE 52" X-TREME. 2-BAG GRASS CATCHER for units w/ S/N and above ASSEMBLY AND PARTS DIAGRAMS
ENCORE 52" X-TREME 2-BAG GRASS CATCHER for units w/ S/N 53138 and above ASSEMBLY AND PARTS DIAGRAMS Notes: ASSEMBLY INSTRUCTION Figure 1 Using 1/2" wrench, remove the discharge cover and the RH deck belt
Part s Catalog. LX420 & LX460 Lawn Tractors. Model No. 13AX60RG744 Model No. 13AX60RH744
Part s Catalog For Parts Call 0-- or 0-- LX0 & LX0 Lawn Tractors Model No. AX0RG Model No. AX0RH Original Instructions (EN) -0 (0//0) Models X0RG & X0RH --00 Turf Tire, 0 x.0 x -000-00 Rim,.0 x.0-0-0 Wheel
MK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
ALL PLANT & MIN TILL DRILL
4000 SERIES ALL PLANT & MIN TILL DRILL OWNER S MANUAL ADDENDUM OPERATION MAINTENANCE REPAIR PARTS #608869 (03-08) 2 Table of Contents Precision Planting Metering System 5-9 Precision Planting Introduction
Davis Equipment - Parts, Service & Sales. To set up an appointment with our team, call
Davis Equipment - Parts, Service & Sales Equipment Lines Davis Equipment Service & Repair Shop Davis Equipment Our service shop has been providing quality repairs and service of Case IH NH3 Toolbars, Tenders,
REPAIR PARTS MANUAL MODEL NUMBER PM105A Snow Thrower BY Printed in U.S.A.
MANUAL MODEL NUMBER PM0A Snow Thrower 8-09.09.0 BY Printed in U.S.A. 9 AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - - MODEL NUMBER PM0A 8 9 0 9 0 8 9 8 8 8 9 0 0 8 9 9 8 9 0 9 0 AUGER HOUSING / IMPELLER
Power Max 724 OE Snowthrower Model No Serial No and Up
Form No. 3374-191 Rev A Power Max 724 OE Snowthrower Model No. 37770 Serial No. 313000001 and Up Register at www.toro.com. Original Instructions (EN) *3374-191* A Ordering Replacement Parts To order replacement
REPAIR PARTS SNOW THROWER - MODEL NUMBER PP927ESC AUGER HOUSING / IMPELLER ASSEMBLY 48
SNOW THROWER - MODEL NUMBER PP9ESC AUGER HOUSING / IMPELLER ASSEMBLY 9 9 0 9 0 9 9 9 0 9 9 9 0 0 0 SNOW THROWER - MODEL NUMBER PP9ESC AUGER HOUSING / IMPELLER ASSEMBLY Washer 99 Pulley, Impeller 909 Bearing
Chain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
REPAIR PARTS SNOW THROWER -- MODEL NUMBER PR5524ESNHL ( ) AUGER HOUSING / IMPELLER ASSEMBLY
REPAIR S SNOW THROWER -- MODEL NUMBER PRESNHL (9900700) AUGER HOUSING / IMPELLER ASSEMBLY 7 0 7 9 0 9 7 0 (EXPLODED) 9 0.07.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm 0 REPAIR
MODEL NUMBER 14527SB-LS PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED S LIST MODEL NUMBER SB-LS PRODUCT NUMBER 9 9 00-9 MFG. ID. NUMBER 9900900 009-0 -90 Rev. 0.09.09 SR AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9
465606x692A Lawn Tractor (2001) Page 1 of 25 Drive Assembly
465606x692A Lawn Tractor (2001) Page 1 of 25 Drive Assembly 465606x692A Lawn Tractor (2001) Page 2 of 25 Drive Assembly 1 26X249 Screw 2 095315 Knob, Parking Brake 3 711691 Nut, Push 4 1001217 Z Rod, Parking
Retriever 5100G/P. 11/89 revised 10/02 FORM NO
Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216
REPAIR PARTS MANUAL MODEL NUMBER PM105B Snow Thrower Rev BY Printed in U.S.A.
MANUAL MODEL NUMBER PM0B Snow Thrower 8 9- Rev. 0.08.0 BY Printed in U.S.A. 9 AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - - MODEL NUMBER PM0B 8 9 0 9 0 8 9 8 8 9 8 9 0 0 8 9 9 9 8 0 0 AUGER HOUSING
REPAIR PARTS SNOW THROWER - MODEL PP930ES ( ) AUGER HOUSING / IMPELLER ASSEMBLY
AUGER HOUSING / IMPELLER ASSEMBLY 9 0 9 0 9 9 AUGER HOUSING / IMPELLER ASSEMBLY 9 Pulley, Impeller 909 Bearing Assembly, Flange Nut, Hex Flange /- Bolt, Flat Head, Carriage /- x / 0 Bolt, Carriage /- 9
Sno-Thro. Parts Manual. Models ST8524E ST724E ST5524E ST ST ST7524
Sno-Thro Parts Manual Models 93204 - ST24E 932046 - ST724E 932047 - ST24E 93204 - ST20 9323 - ST20 932312 - ST724 006600A /06 Printed in USA THE MANUAL Before you operate your unit, carefully and completely
Combine Pickup Heads
Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of
FIELD & BRUSH MOWER SERIES 0
Parts Manual for SERIES 0 MODEL FB13250BS FB13250BV FB15250KW McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1, 8/30/2005 Table Of Contents PAGE GROUP
MODEL SUPER P Parts List
MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway
PR6R24 ILLUSTRATED PARTS LIST MODEL NUMBER: SNOW THROWER
IMPORTANT MANUAL Do Not Throw Away ILLUSTRATED S LIST MODEL NUMBER: PRR SNOW THROWER WARNING: Read the Owner's Manual and fol low all Warnings and Safety In struc tions. Fail ure to do so can result in
Parts Manual for (L.E.) SINGLE STAGE SNOW THROWER SERIES 0 MODELS LE3170R LE3170E LE30R LE30E ELE30R 30M (1694382) 30E (1694383) IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE
PARTS LIST. Craftsman 5.5 HP Snow Thrower Model
24 Craftsman 5.5 HP Snow Thrower Model 24.88355 1. 31-2635 Snow Removal Tool Mount 2. 684-0405 Impeller Assembly, 12 Dia. 3. 10-034 Hex Screw, 3/8-16, 1.5, Gr5 4. 10-0451 Bolt, Carriage, 5/16-18,.50 Gr1
PARTS MANUAL. Time Saver Wide Cut Mower. I N E CUB G E N U
PARTS MANUAL Time Saver Wide Cut Mower G E N U FAC TORY I N E PARTS 1-800-965-4CUB www.cubcadet.com FORM NO. 69-03049 PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 1/29/200
Automatic Lawn Tractor Model Series 600
Illustrated Parts Manual Automatic Lawn Tractor Model Series 600 MTD LLC, P.O. BOX 6 CLEVELAND, OHIO 6-009 Printed In USA Form No. 69-09 (January 8, 008) -Style Fender, Deck Lift & Seat 6 6 0 8 On some
GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS
GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS. 112000-115499 1 DISCHARGE ASSEMBLY - GRAIN BELT DRIVE OVER CONVEYOR SERIAL NOS. 112000-115499 2 REF # PART NO. DESCRIPTION QTY 1 C200760 Discharge Weldment
MODEL NUMBER 1830HV PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED S LIST MODEL NUMBER 0HV PRODUCT NUMBER 00- MFG. ID. NUMBER 000 0 0-0 AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL 0HV (000), PRODUCT 00-0 0 0 (EXPLODED) 0.0.0-F NOTE: All component
5524 ST. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar I S E R V I C E IPL, 5524 ST, ,
S E R V I C E I000 IPL, ST, 0-09, 0 - EUSTA ST Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 0 - AUGER HOUSING / IMPELLER ASSEMBLY 9 0 9 0 9 9 0 AUGER HOUSING / IMPELLER
Mfg. No: P216020KWV, 21" 6 TP Steel Deck Series
Parts Manual Mfg. No: 7800557 P216020KWV, 21" 6 TP Steel Deck Series Copyright Briggs and Stratton. All Rights reserved 28-Sep-2018 Model Components Table Of Contents Page Accessory Recycling Kits..............................................................................
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
REPAIR PARTS SNOW THROWER - MODEL NUMBER PP8527ESA AUGER HOUSING / IMPELLER ASSEMBLY
For Parts Call K&T 0--9 or 0--9 SNOW THROWER - MODEL NUMBER PPESA AUGER HOUSING / IMPELLER ASSEMBLY 9 9 0 9 0 9 9 9 0 9 9 9 0 0 0 For Parts Call K&T 0--9 or 0--9 SNOW THROWER - MODEL NUMBER PPESA AUGER
Parts Manual DX260 BF / DX272 BF /
Parts Manual DX260 BF / 966651302 DX272 BF / 966651502 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10%
824XL, 824XL Int l Snowthrower
Form No. 824XL, 824XL Int l Snowthrower Model No. 38086 200000001 and Up Model No. 38066 200000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number,
MODEL NO & UP SAFETY AND INSTRUCTION DECALS
FORM NO. 95-2194 REV. B MODEL NO. 41105-90001 & UP PARTS CATALOG MULTI PRO 1100 VEHICLE SAFETY AND INSTRUCTION DECALS The following safety and instruction decals are installed on the vehicle. If any become
LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL
72B27LD PARTS MANUAL
7 2 B 2 7 L D PARTS MANUAL 6 MID-CUT SECTION 6 MID-CUT DECK ASSEMBLY 25 24 23 26 22 00 20 9B SEE NOTE A 9A 75 34 6 2 87 98 05 03 2 90 2 68 53 93 02 69 5 49 5 7 8 0 0 9 36 88 8 58 97 3 46 59 3 72 92 76
PIÈCES DÉTACHÉES SNM6X (ESPV21) Tondeuse à conducteur marchant
PIÈCES DÉTACHÉES Tondeuse à conducteur marchant SNM6X (ESPV21) Yvan Béal - 21, av. de l Agriculture - B.P. 16 Z.I. du Brézet - 63014 Clermont-Ferrand Cedex 2 Tél : 04 73 91 93 51 - Télécopie : 04 73 90
Power Max Commercial 1428 OHXE Snowthrower
Form No. 3423-347 Rev A Power Max Commercial 1428 OHXE Snowthrower Model No. 38843 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3423-347* A Ordering Replacement Parts
REPAIR PARTS SNOW THROWER - - MODEL NO. PR827ES ( ) AUGER HOUSING / IMPELLER ASSEMBLY
REPAIR PARTS SNOW THROWER - - MODEL NO. PR8ES (00000) AUGER HOUSING / IMPELLER ASSEMBLY (x) (x) 0.0.00-A 0X8 AUGER HOUSING 0X SCRAPER BAR 00 CARRIAGE BOLT / 8 X. NUT / 8 0.0.0-B 08 AUGER BEARING BEARING
PR624ES OWNER'S MANUAL MODEL NUMBER: SNOW THROWER
IMPORTANT MANUAL Do Not Throw Away OWNER'S MANUAL MODEL NUMBER: PRES SNOW THROWER WARNING: Read the Owner's Manual and fol low all Warnings and Safety In struc tions. Fail ure to do so can result in serious