Combine Pickup Heads

Size: px
Start display at page:

Download "Combine Pickup Heads"

Transcription

1 Combine Pickup Heads 124 Model Section 1 Model Years Pickup Head Layout Model Years (1 PUH Bearings) Tube Pickup Head Layout Model Years 2000 Present (1 1/4 PUH Bearings) Tube Pickup Head Layout Tube Pickup Head Layout 2015 Present Return to this page by clicking the upper right corner of any page in this section. Revised January,

2

3 124" COMBINE PICK UP HEAD ( ) COMBINE PICKUP HEAD Item No. Part No. Description Pickup Head Tube with Spiders ¾" Finger Rods Long Not Shown ¾" Finger Rods Intermediate ¾" Finger Rods Short Left Pipe Ends Short Left Pipe Ends Long Right Pipe Ends Short Right Pipe Ends Long Flangette Housing, 2-Hole Center Bushing, 2 piece white Rubber Fingers Not Shown Offset Rubber Fingers Cam Arms End Bushings, 1 piece black L.H. Cam Track L.H. Straw Guard R.H. Straw Guard R.H. Chain Guard L.H. Chain Guard Wheel Mount Assembly, R.H. (Obsolete no ) Wheel Mount Assembly, L.H. (Obsolete no ) Wheel Mount Spacers, 1" Spring Mount Lock Bushing Wheel Mount Spring Steel Wheel (Obsolete no ) Tire 4 x 8 Not Shown Wheel Assembly Complete (items: 23 & 24) Not Shown Straddle Hub (used with items: 23, 24, 25, 26)(use bushings & ) Not Shown " Straddle Hub Bearing cone (4 required) Not Shown " Straddle Hub Bearing cup (4 required) Not Shown Hub Seal (4 required) Wheel Fork Axle (Obsolete no ) Wheel Fork Assembly (Obsolete no ) Rotor Rod Clip, 2-Hole Rotor Rod Clip, 3-Hole

4 124" COMBINE PICK UP HEAD ( ) COMBINE PICKUP HEAD Item No. Part No. Description Rotor Rod, Right End Only Rotor Rod Hold Down Mount Bracket, R.H Hold Down Mount Bracket, L.H Hold Down Rod Hold Down Rod Mounting Brace Assembly Support Assembly, R.H Support Plate Assembly, L.H Hex Roller Slinger Tube Roller, 4" End Hinge Plate Front Shield, L.H Front Shield, R.H Rear Shield Assembly, L.H Rear Shield Assembly, R.H Upper Chain Bracket Lift Chain, 3 /16" Not Shown Spring, Combine Pickup Head (used with item no.45) Upright Angle, L.H Upright Angle, R.H Wheel Fork Spring Mount Hinge Lock Knife Support Assembly, LH Short (Not shown: Spacer Plate) Knife Support Assembly, RH Long (Not shown: Spacer Plate) Rotor Rod Mount Assembly Idler Sprocket Bracket Idler Sprocket, 13 Tooth, R.H Idler Sprocket, 17 Tooth, L.H Flangette Bearing Housing, 2-Hole Flangette Housing, 3-Hole Bearing Insert with Lock Collar 1" Rear 4" Roller Drive Sprocket 15 tooth Hex Slinger Tube Power Transfer Sprocket 26 tooth Chain, 45 Pins or 22 Links Pickup Head Drive Sprocket 60 tooth Hex Slinger Tube Drive Sprocket 15 tooth Chain, 80 Pins or 40 Links Hydraulic Motor Mount " 3" Split Coupler Hydraulic Motor Replace

5 124" COMBINE PICK UP HEAD ( ) COMBINE PICKUP HEAD Item No. Part No. Description Hinge Spacer Cam, Track, R.H Cam Arm Roller Bearing Not Shown Complete Pickup Head Assembly (Replaced by ) This part is manufactured on a built-to-order basis only. Call Pickett Equipment for availability and lead-time. Pickup Head parts noted are for use on pickup heads only. See pickup head layout, page 8 and 9 of this section, for pickup head part information. For obsolete part conversion information contact Pickett Equipment or your local dealer

6

7 PICK UP HEAD ASSEMBLY 124 Model, ( ) Item No. Part No. Description Cam Arm Bearing, Cam Arm Shaft, L.H. Short Finger Rod Stub Shaft, L.H. Long Finger Rod Stub Shaft, R.H. Short Finger Rod Stub Shaft, R.H. Long Finger Rod Stub Finger, Rubberized Center Spider Stub Shaft Short Center Spider Stub Shaft Long Coupler, Finger Rod Flangett, 2-Hole Bearing, 1 Insert with Lock Collar Spacer, Pickup Head Cam, R.H. Track Cam, L.H. Track Rotor Rod Mount Pickup Tube with 5 spiders Hex Roller Roller Finger Rod 25 3 /8, 6 required per P.U.H Finger Rod 29 3 /8, 10 required per P.U.H. Not Shown Complete Pickup Head Assembly Not Shown Two-Hole End Spider (sold in pairs) Not Shown Four-Hole Center Spider (sold in pairs) Hardware List Item No. Part No. Description A. 7/16 3 NC Hex Bolt Grade 8 B. 7/16 NC Nyloc Hex Nut C. 1 SAE Flat Washer D. 5/8 NF Jam Nut E. 5/8 Shim Washer COMBINE PICKUP HEAD F. 5/16 1½ NC Hex Bolt Grade 5 (For use on Fingers only) G. 5/16 NC Whiz Nut H. 5/16 x 1½ NC Hex Bolt Grade 8 (For use on all couplers and stub shafts)

8

9 124 (12 ft.) COMBINE PICKUP HEAD ( ) (1 PUH Bearings) Item No. Part No. Description COMBINE PICKUP HEAD Tube Pickup Head (See pages 11-12) (1" PUH bearings) 1a Tube Pickup Head (Not Shown) (See pages 16 17) (1" PUH bearings) Cam Track, Universal R.H. Rear Side Plate* L.H. Rear Side Plate* R.H. Roller Shroud L.H. Roller Shroud R.H. Side Plate Deflector Rod L.H. Side Plate Deflector Rod R.H. Front Side Plate (1 PUH bearings) L.H. Front Side Plate (1 PUH bearings) R.H. Gauge Wheel Arm (Requires swivel pin # ) L.H. Gauge Wheel Arm (Requires swivel pin # ) Hold Down Rod Mount Bracket Hold Down Rod Spring Mount Lock Bushing Wheel Mount Spacer (½ ) Wheel Mount Spacer (1 ) Wheel Fork Assembly (Wide Frame) (1999 only) 18a Wheel Fork Assembly (Narrow Frame) ( ) Wheel Fork Axle (Requires 1 NF Castellated Hex Nut & ¼ Roll Pin) (1999 Present) 19a Wheel Fork Axle (Requires 1 NF Castellated Hex Nut & ¼ Roll Pin) ( ) Steel Wheel 8 7 (5 on 4.5) (use bushing nos & ) (1999 Present) 20a Steel Wheel 8 4 (5 on 4.5) (use bushing nos & ) ( ) Not Shown Straddle Hub (used with items: 18, 19, 20, 21) Not Shown Straddle Hub Bearing cone (4 required) Not Shown Straddle Hub Bearing cup (4 required) Not Shown Hub Seal (4 required) Tire ( ) (1999 Present) 21a Tire (4 8) ( ) Not Shown Wheel Assembly (Complete) (items: 20 & 21) (1999 Present) Not Shown Wheel Assembly (Complete) (items: 20a & 21a) ( ) Wheel Mount Spring Wheel Fork Spring Mount Hex Roller Roller Rotor Rod Mount Rotor Rod Not Shown Rotor Rod Clip (3-hole) Rotor Rod (R.H. End Only) Revised September,

10 124 (12 ft.) COMBINE PICK UP HEAD ( ) (1 PUH Bearings) Item No. Part No. Description Not Shown Rotor Rod Clip (2-Hole) (R.H. End Only) Bearing, 1 Insert with Lock Collar Flangette, Housing (3-Hole) Flangette, Housing (2-Hole) Sprocket, 50 Q60 Taper Lock (SK Series) (replaces ) Sprocket, 50BTB15H Taper lock (replaces ) 33a Bushing, KW Taper lock (replaces ) Idler Sprocket, (50 BS 13) Idler Sprocket Mount Sprocket, 40BTB30H Taper lock (sprocket only) 36a Bushing, KW Taper lock Sprocket, 40BTB17H Taper lock (sprocket only) 37a Bushing, KW Taper lock Idler Sprocket, (40 BS 17) Idler Sprocket Mount Not Shown Chain (80 pins or 40 links) Not Shown Chain (47 pins or 23-1 / 2 links) Chain Guard Chain Guard Chain Guard Mount R.H. End Hinge Bracket L.H. End Hinge Bracket Hinge Lock Upright Angle, R.H. (1997 Present) Upright Angle, L.H. (All Models) Upper Chain Bracket Lift Chain, 1/ Knife Support Bracket, (Universal) R.H. Knife Support (for use with Universal Header) L.H. Knife Support (for use with Universal Header) Hydraulic Motor Mount Split Coupler Hydraulic Motor (MF Series) Hinge Spacer Sprocket, 1 Taper Lock Hub (SK Series) (replaces ) COMBINE PICKUP HEAD Spacer, Pick Up Head (3 29 /32 Lg.) (1" I.D.) *Not Shown Complete R.H. Side Plate Assembly (1 Bearing) (includes # & ) *Not Shown Complete R.H. Side Plate Assembly (1 Bearing) (includes # & ) When ordering parts verify year and wheel fork assembly shaft size the wheel fork pivot shaft is 1 3 / present the wheel fork pivot shaft is 1 1 / 4 10 Revised September, 2012

11

12 COMBINE PICKUP HEAD 4-TUBE PICK UP HEAD ASSEMBLY 124 Model ( ) Item No. Part No. Description Cam Arm, Universal Bearing, Cam Arm Shaft, L.H. Short Finger Offset Shaft, L.H. Long Finger Offset Shaft, R.H. Short Finger Offset Shaft, R.H. Long Finger Offset Finger, Rubberized (122 Per Machine) Center Spider Stub Shaft Short Center Spider Stub Shaft Long Coupler, Finger Rod Flangett, 2-Hole Bearing, 1 Insert with Lock Collar Spacer, Pickup Head (3 29 /32" Lg.) (1" I.D.) Cam Track, Universal Cam Track, Universal Rotor Rod Mount Pickup Tube with 5 spiders (1" PUH bearings) Hex Roller Roller Finger Rod 25 3 /8, 6 required per P.U.H Finger Rod 29 3 /8, 10 required per P.U.H. Not Shown Complete Pickup Head Assembly (1" PUH bearings) Not Shown Four-Hole End Spider Not Shown Eight-Hole Center Spider Hardware List Item No. Part No. Description A. 7/16 3 NC Hex Bolt Grade 8 B. 7/16 NC Nyloc Hex Nut C. 1 SAE Flat Washer D. 5/8 NF Jam Nut E. 5/8 Shim Washer, Optional F. 5/16 1½ NC Hex Bolt Grade 5 (For use on Fingers only) G. 5/16 NC Whiz Nut H /16 2 NF Hex Bolt Grade 9 (For use on all couplers and stub shafts) Ha /16" NF Stover Nut (Grade 9) (sold as a set with bolt) 12 Revised September, 2012

13 HEAD ASSEMBLY 124" PICK-UP

14 124 COMBINE PICKUP HEAD (2000-Present) COMBINE PICKUP HEAD (1 1/4 PUH Bearings) Item No. Part No. Qty Description Tube Pickup Head Cam Track, Universal R.H. Rear Side Plate L.H. Rear Side Plate R.H. Front Side Plate (1 1/4" PUH bearings) L.H. Front Side Plate (1 1/4" PUH bearings) Complete R.H. Side Plate Assembly (includes items 3 & 5) Complete L.H. Side Plate Assembly (includes items 4 & 6) R.H. Roller Shroud L.H. Roller Shroud R.H. Side Plate Deflector Rod L.H. Side Plate Deflector Rod Hold Down Rod Mount Assembly Hold Down Rod R.H. Gauge Wheel Arm (Requires swivel pin # ) L.H. Gauge Wheel Arm (Requires swivel pin # ) Spring Mount Lock Bushing Wheel Mount Spacer (1/2 ) Wheel Mount Spacer (1 ) Wheel Mount Spring Wheel Fork Spring Mount Wheel Fork Assembly (Wide Frame) Wheel Fork Axle (Requires 1 NF Slotted Hex Nut & ¼ Roll Pin) Tire ( ) Steel Wheel 8 7 (5 on 4.5) Wheel Assembly (Complete) (items: 24 & 25) Straddle Hub (includes items: 28, 29 & 30) Straddle Hub Bearing cone Straddle Hub Bearing cup Hub Seal Bushing, Spacer 4-1/8 long Bushing, Spacer 3-9/16 long Sprocket, 50QDSK60 Taper Lock (SK Series) Sprocket, 1 1/4" Taper lock Hub Chain Guard Flangette, 2-Hole (72 MST) Bearing, 1 1/4" Insert with Lock collar Hydraulic Motor (MF Series) 38a Seal Kit for Item Split Coupler Hydraulic Motor Mount 14 Revised December, 2016

15 124 COMBINE PICKUP HEAD (2000-Present) COMBINE PICKUP HEAD (1 1/4 PUH Bearings) Item No. Part No. Qty Description Idler Sprocket (5013E10) Idler Sprocket Mount Flangette, Housing (2 Hole) Bearing, 1 Insert with Lock Collar Flangette, Housing (3 Hole) Sprocket, 50BTB15H Taper lock Bushing, KW Taper lock Hinge Spacer (2016 Present) 48a Hinge Spacer ( ) R.H. End Hinge Bracket (2016 Present) 49a R.H. End Hinge Bracket ( ) Hinge Lock L.H. End Hinge Bracket (2016 Present) 51a L.H. End Hinge Bracket ( ) Sprocket 40TBT17H Taper lock (2013 Present) 52a Sprocket, 40BTB30H Taper lock ( ) Bushing, KW Taper lock (2013 Present) 53a Bushing, KW Taper lock ( ) Spacer, Pickup Head Lift Chain, 1/ Idler Sprocket (4017E08) Idler Sprocket Mount Sprocket, 40BTB17H Taper lock (sprocket only) Hex Roller Roller Rotor Rod Mount Rotor Rod Rotor Rod Half (L.H. End Only) Rotor Rod Clip (3 hole) Rotor Rod Clip (2 hole) (L.H. End Only) Chain (80 pins or 40 links) Chain (40 pins or 20 links) (2013 Present) 67a Chain (47 pins or 23 1/2 links) ( ) Chain Guard Chain Guard Mount Upright Angle, R.H. (1997 Present) Upright Angle, L.H. (All Models) Upper Chain Bracket R 2 R.H Knife Support Bracket L 2 L.H. Knife Support Bracket Shock, Gas Charged (2013 Present) Revised December,

16

17 COMBINE PICKUP HEAD 8-TUBE PICKUP HEAD ASSEMBLY (124 MODEL) Item No. Part No. Qty Description Cam Arm (Universal) Bearing, Cam Arm Shaft, L.H. Short Finger Offset Shaft, R.H. Long Finger Offset Finger Rod 25 3 /8 (7-Holes) Finger Rod 29 3 /8 (8-Holes) Tube finger with radius End Spider Stub Shaft (short) End Spider Stub Shaft (long) Coupler, Finger Rod pr. Flangett, 2-Hole Bearing, 1 Insert (with Lock Collar) Spacer, Pickup Head (3 29 /32 Lg.)(1 1 / 4 I.D.) 13a Spacer, Pickup Head (3 29 /32 Lg.)(1 I.D.) Cam Track (Universal) Rotor Rod Mount (130¾ ) Pickup Tube (with 5 Spiders) (124 3 /16 ) (1" PUH bearings) 16a Pickup Tube (with 5 Spiders) (124 3 /16 ) (1¼" PUH bearings) Roller (128 7 /8 ) Hex Roller (126 3 /8 ) Eight Hole Spider Not Shown Complete 8 Tube Pickup Head Assembly (124 3 /16 ) (1" PUH bearings) Not Shown Complete 8 Tube Pickup Head Assembly (124 3 /16 ) (1¼" PUH bearings) Roller Carriers Not Shown ¼ Pickup Head Carrier (Drive-end keyed) Not Shown ¼ Pickup Head Carrier (Idler-end no key) Not Shown Roller Carrier (Drive-end keyed) Not Shown Roller Carrier (Idler-end no key) Not Shown Hex Roller Carrier (R.H. end 4¾ keyway) Not Shown Hex Roller Carrier (L.H. end 2½ keyway) Not Shown Pickup Head Carrier (Drive-end keyed) Not Shown Pickup Head Carrier (Idler-end no key) Hardware List Item No. Part No. Qty Description A. 8 7/16 3 NC Hex Bolt (Grade 8) B. 8 7/16 NC Nylon Hex Nut C. 8 5/8 NF Jam Nut D /16 2 NF Hex Bolt (Grade 9)(sold as a set with nut) E /16 NF Stover Nut (Grade 9)(sold as a set with bolt) F /16 1½ NC Hex Bolt (Grade 5)(use on fingers only) G /16 NC Whiz Nut (use on fingers only) Revised August,

18 DETAIL "A" 4 A B FINGER RODS REQUIRED PER (124-3/16") 8 TUBE P-U HEAD ( 4 REQ'D) 41-3/8" (11 HOLES) (20 REQ'D) 37-3/8" (10 HOLES) A 6 5 C 2 1 Left End B C Right End 19 L.H. END 15 DETAIL "C" DETAIL "B" DETAIL "D" F R.H. END D 13 G 8 124" MODEL 8 TUBE PICK-UP HEAD ASSEMBLY 11 E L.H. END (NO KEY) 5 DETAIL "A" 10 DETAIL "C" 124 3/16" 9 DETAIL "D" DETAIL "A" 10 R.H. END (KEYED) DETAIL "B" DETAIL "D" DETAIL "C" 6

19 COMBINE PICKUP HEAD 8 TUBE PICKUP HEAD ASSEMBLY (124 MODEL) 2015 Present Item No. Part No. Qty Description Bearing, Cam Arm LH 8 Cam Arm (Threaded) RH 8 Cam Arm (Threaded) Shaft, L.H. Long Finger Offset Shaft, L.H. Short Finger Offset Shaft, R.H. Long Finger Offset Shaft, R.H. Short Finger Offset Finger, with radius (8 Tube Pickup Head) 8a Finger, Soft (Optional) Finger Rod 41 3 /8 (11 holes) Finger Rod 37 3 /8 (10 holes) Coupler, Finger Rod Pr. Flangette, 2 Hole Bearing, 1 Insert (with Lock Collar) Spacer, Pickup Head (3 29 /32 Lg.) Cam Track (Universal) Rotor Rod Mount (130 3/8 ) Pickup Tube (with 4 Spiders) (124 3/16 ) Roller (128 7/8 ) Hex Roller (126 3/8 ) Hole Spider Not Shown A 1 Complete 8 Tube Pickup Head Assembly (124 3/16 ) Roller Carriers Not Shown Pickup Head Carrier (Drive-end keyed) Not Shown Pickup Head Carrier (Idler-end no key) Not Shown Roller Carrier (Drive-end keyed) Not Shown Roller Carrier (Idler-end no key) Not Shown Hex Roller Carrier (R.H. end 4¾ keyway) Not Shown Hex Roller Carrier (L.H. end 2½ keyway) Hardware List Item No. Part No. Qty Description A. 16 7/ /4 NC Hex Bolt Grade 8 B. 16 7/16 Lock Washer C. 16 5/8 NF Jam Nut D /16 2 NF Hex Bolt Grade 9 (sold as a set with nut E /16 NF Stover Nut Grade 9 (sold as a set with bolt F /16 1½ NC Hex Bolt Grade 5 (use on fingers only) G /16 NC Whiz Nut (use on fingers only) Revised August,

Combine Pickup Heads

Combine Pickup Heads Combine Pickup Heads 164 Model Section 3 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model

More information

Universal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...

Universal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown... Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup

More information

Universal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...

Universal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown... Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup

More information

Combine Pickup Heads

Combine Pickup Heads Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of

More information

One Step Ahead Rod Cutter (Front Mount Unit)

One Step Ahead Rod Cutter (Front Mount Unit) One Step Ahead Rod Cutter (Front Mount Unit) Pickup Head Layouts Section 7 Model Years 1992 1993... 2-3 Model Years 1994 1996... 4-5 Model Years 1997 Present (4 Tube)... 6-7 Model Years 1997 2013 (8 Tube)...

More information

Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown

Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown Universal Platform 282 Model Section 5 Platform Parts Breakdown... 2-3 Retractable Finger Auger Parts Breakdown... 4-5 Combine Pickup Head Parts Breakdown... 6- Return to this page by clicking the upper

More information

One Step Ahead Rod Cutter (Front Mount Unit)

One Step Ahead Rod Cutter (Front Mount Unit) One Step Ahead Rod Cutter (Front Mount Unit) Pickup Head Gear System (LH End View) Section 6 Model Years 1992 1998... 2-3 Model Years 1998 1999 (1 PUH Bearing)... 4-6 Model Years 1998 2012 (1 1/4 PUH Bearing)...

More information

Double Master Plus Combine

Double Master Plus Combine Pickup Head Section 3 Pickup Head Straight Pull (2001 20)... 2-7 Pickup Head DMP SP2 (2006 2008)... 8-10 Pickup Head DMP SP2 (20 2014)... 11-13 Pickup Head DMP & DMP SP (2010 2014)... 14-16 Pickup Head

More information

One Step Rod Cutter Rear Pull

One Step Rod Cutter Rear Pull One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)

More information

One Step Ahead Rod Cutter (Front Mount Unit)

One Step Ahead Rod Cutter (Front Mount Unit) One Step Ahead Rod Cutter (Front Mount Unit) Front Gauge Wheels Section 4 Model Years 1992 1994... 2-5 Model Years 1995 1996... 6-9 Model Years 1997 Present... 10-11 Front Gauge Wheel Divider 1992 Present...

More information

Main Frame (1,676 MM (5-1/2 FT.) Hay Pickup)

Main Frame (1,676 MM (5-1/2 FT.) Hay Pickup) Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM

More information

Twin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...

Twin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)... Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised

More information

Twin Master Combine. Transmission & Gear Boxes Section 8. 2 Speed Transmission Transmission Gear Shift

Twin Master Combine. Transmission & Gear Boxes Section 8. 2 Speed Transmission Transmission Gear Shift Twin Master Combine Transmission & Gear Boxes Section 2 Speed Transmission... 2-4 Transmission Gear Shift... 5-6 PTO Swivel Gear Box 107021... 7- Transition Auger Gear Box 107026... 9-10 Straw Chopper

More information

Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER

Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER PARTS CATALOG Form 46619 Issue 01/06 Sugg. Retail: $15.00 Inside Front Cover (blank) Models 912, 922

More information

EUROPEAN REAR ENGINE RIDER SERIES 20

EUROPEAN REAR ENGINE RIDER SERIES 20 Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,

More information

Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG

Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG with Adapters for: Model 7000 Self-Propelled Windrower Model 9000 Self-Propelled Windrower John Deere 7720, 8820, 9500, 9600

More information

REAR ENGINE RIDER EUROPEAN SERIES 22

REAR ENGINE RIDER EUROPEAN SERIES 22 Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING...4,

More information

ROW CROP MANAGER CONTENTS

ROW CROP MANAGER CONTENTS ROW CROP MANAGER CONTENTS Complete Parts Breakdown Section 1 Row Crop Manager (Exploded View)...4 Folding Wing (Exploded View)...8 Adjustable Row Module Section 2 Row Module (Exploded View)...12 V-Guide

More information

DEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev.

DEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev. FORM NO. 01-505-0440 Rev. D MODEL NO. 44520-20101 & UP PARTS CATALOG DEBRIS BLOWER 2613 Part 1 61-005-0073 Hitch & Lower Housing 1 2 61-005-0121 Fan Housing 1 3 61-005-0061 Fan Assembly 1 4 01-113-0070

More information

A-Series A30-S and A30-D Pull-Type Mower Conditioners / A30-S, A30-D, and A40-D Self-Propelled Windrower Headers

A-Series A30-S and A30-D Pull-Type Mower Conditioners / A30-S, A30-D, and A40-D Self-Propelled Windrower Headers A-Series A30-S and A30-D Pull-Type Mower Conditioners / A30-S, A30-D, and A40-D Self-Propelled Windrower Headers Parts Catalog 147911 Revision A Original Instruction The harvesting specialists. MacDon

More information

Chain Box and Knife. Item # Description Part Number 180-D & GS

Chain Box and Knife. Item # Description Part Number 180-D & GS Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152

More information

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0

More information

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-561C (Gandy Part #6245DS-GP) For Great Plains Turbo-Max 2400, 3000, 3500 & 4000 Models 45

More information

X Dodge / Chrysler /2. Model 44 /216 Disconnect Front Axles for. W1500 and W2500 Ram

X Dodge / Chrysler /2. Model 44 /216 Disconnect Front Axles for. W1500 and W2500 Ram Dodge / Chrysler 1994-1998 1 /2 Model 44 /216 Disconnect Front Axles for W1500 and W2500 Ram 15 Exploded View 16 Parts Listing ITEM NO. PART NUMBER DESCRIPTION 1 (3) Housing Axle Service 2 (1) Drive Pinion

More information

Part s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)

Part s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06) Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0

More information

Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to

Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 6250BN36C Orbit-Air Applicator 50 Cu. Ft. Hopper w/ 26 (1-1/4 ) Openings,

More information

Loader Backhoe Front Axle Parts 2WD & 4WD

Loader Backhoe Front Axle Parts 2WD & 4WD Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS

More information

Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to

Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 62BN24C Orbit-Air Applicator 21.9 Cu. Ft. (.62m 3 ), 1000-Lb Capacity,

More information

Warranty, Parts & Service

Warranty, Parts & Service Warranty, Parts & Service WARRANTY Weaverline battery power feed cart are designed and manufactured to high quality standards. Weaverline, LLC therefor guarantees this equipment to be free from defect

More information

TT4101 Rotary Tedder

TT4101 Rotary Tedder TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N

More information

CHIPPER/SHREDDER SERIES

CHIPPER/SHREDDER SERIES Parts Manual CHIPPER/SHREDDER SERIES SIMPLICITY MODELS Mfg. No. Description 1692201 2/10, 2C Chipper/Shredder (Electric Motor) 1692202 3/10 Chipper/Shredder (Electric Motor) 1692203 5C Chipper/Shredder

More information

LARGE FRAME REAR TINE TILLERS SERIES 2

LARGE FRAME REAR TINE TILLERS SERIES 2 Parts Manual for LARGE FRAME REAR TINE TILLERS SERIES 2 MODEL R5002B R5002R R8002B R8002BE RT5 RT5X RT8 RT8S McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision

More information

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics

More information

250P Manure Spreader

250P Manure Spreader 0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly

More information

Feed Rolls 3940 and 3960 PTFH Upper Feed Rolls

Feed Rolls 3940 and 3960 PTFH Upper Feed Rolls Feed Rolls Upper Feed Rolls 12 3940 and 3960 PTFH 3940 and 3960 PTFH Feed Rolls 46 KEY PART NO. PART NAME QTY. SERIAL NO. 00 REMARKS 1 E52437 BUSHING 1 XX 2 34H353 SPRING PIN 1 X X 3/8" X 1-3/4" 3 24H1480

More information

RITE WAY MFG. CO. LTD. P.O.

RITE WAY MFG. CO. LTD. P.O. CO. LTD. P.O. Box 328 Imperial, Saskatchewan Canada, S0G 2J0 Ph: (306) 963-280 Fax: (306) 963-2660 Web Site: www.ritewaymfg.com E-mail: info@ritewaymfg.com Table of Contents SPECIFICATIONS... WARNING...2

More information

PIÈCES DÉTACHÉES. Chasse-neige. Révision 10/

PIÈCES DÉTACHÉES. Chasse-neige. Révision 10/ PIÈCES DÉTACHÉES Chasse-neige 555 860 Révision 10/2004 Y v a n B é a l - 2 1, a v. d e l A g r i c u l t u r e - B. P. 1 6 Z. I. d u B r é z e t - 6 3 0 1 4 C l e r m o n t - F e r r a n d C e d e x 2

More information

Index PICK-UP REEL PARTS. Hart Carter ML Reel Bats & Attaching Parts Universal Profiteer Reel Parts... 14

Index PICK-UP REEL PARTS. Hart Carter ML Reel Bats & Attaching Parts Universal Profiteer Reel Parts... 14 Index Hart Carter ML Reel Bats & Attaching Parts... 5 Hart Carter ML Reel Parts 5 bat...4 6 bat...5 Universal Profiteer Reel Parts... 14 Universal Series I Reel Parts... 15 Universal Series II Reel Parts...16-17

More information

Reproduction. Not for. Mid Frame Dual Stage Snowthrowers. Parts Manual

Reproduction. Not for. Mid Frame Dual Stage Snowthrowers. Parts Manual Parts Manual Attachment Mfg. No. Description 1695821 (I1224E), 11.5TP 24" Dual Stage Snowthrower 1695842 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrowers Not for Reproduction

More information

RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0

RZT TWIN STICK HYDRO DRIVE 250 Z 44 & 50 SERIES 0 Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,

More information

1 RS-300/D 320/D 340/D 350H Parts Manual

1 RS-300/D 320/D 340/D 350H Parts Manual 300/D 320/D 340/D 350H Parts Manual Table Of Contents Three Point Hitch / Hitch Frame Assembly... 3 Tongue Pull Hitch Assembly... 7 Main Gearbox... 11 Crank Handle & Gear... 13 Hydraulic Lift... 15 Rotor

More information

AllCropHarvester.com. New/New Old Stock List as of 03/04/2016

AllCropHarvester.com. New/New Old Stock List as of 03/04/2016 AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.

More information

PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A

PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag

More information

Illustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN For a complete distributor & dealer list go to

Illustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN For a complete distributor & dealer list go to Illustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 66GW27F Orbit-Air Applicator 120 Cu. Ft. Hopper w/ 27 (2 ) Openings, Fertilizer

More information

FRONT TINE TILLERS SERIES 0 & 1

FRONT TINE TILLERS SERIES 0 & 1 Parts Manual for FRONT TINE TILLERS SERIES 0 & 1 MODEL 300T 301T 401TCR 500T 500TC 500TRC 501T 501TC McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 6, 3/7/2006

More information

SERIAL NUMBERS

SERIAL NUMBERS J.E. LOVE COMPANY TREE SEEDLING HARVESTER SERIAL NUMBERS 103-114 FORESTRY PRODUCTS GROUP P.O. BOX 188 GARFIELD, WA 99130-0188 PHONE: (509) 635-1321 FAX: (509) 635-1434 Manufacturers of Special Harvesting

More information

LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"

LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES G Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.

More information

Revised August BRIGGS IRRIGATION Spare Parts Manual for R18, R24, R30 Hosereel Mounted Boom Irrigators

Revised August BRIGGS IRRIGATION Spare Parts Manual for R18, R24, R30 Hosereel Mounted Boom Irrigators Revised August 2013 BRIGGS IRRIGATION Spare Parts Manual for R18, R24, R30 Hosereel Mounted Boom Irrigators 16 Figure 1. Chassis (R18, R24, R30) 17 Figure 1. Chassis (R18, R24, R30) Item Description Part

More information

PARTS MANUAL. MB16, MB21, and MTB16 Scoot-Crete Power Buggies

PARTS MANUAL. MB16, MB21, and MTB16 Scoot-Crete Power Buggies PARTS MANUAL MB16, MB21, and MTB16 Scoot-Crete Power Buggies (revised June 14, 2004) 1 Part #32107-01 2 This manual is for Miller MB16, MB21 and MTB16 Buggies Table of Contents General Arrangement and

More information

Reproduction. Not for. Large Frame Dual Stage Snowthrowers. Parts Manual. Attachment

Reproduction. Not for. Large Frame Dual Stage Snowthrowers. Parts Manual. Attachment Parts Manual Attachment Large Frame Dual Stage Snowthrowers Mfg. No. Description 1695987 (L1528E), 14.5TP 28" Dual Stage Snowthrower 1695988 (L1730E), 16.5GT 30" Dual Stage Snowthrower 1695996 (L1428EX),

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0

More information

PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.

PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to

Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 62DS12F Orbit-Air Applicator 10 CU. FT. (.28m 3 ) Hopper, 450-Lb Chemical

More information

Reproduction. Not for. Signature Pro Dual Stage Snowthrowers. Parts Manual. Attachment

Reproduction. Not for. Signature Pro Dual Stage Snowthrowers. Parts Manual. Attachment Parts Manual Attachment Signature Pro Dual Stage Snowthrowers Mfg. No. Description 1695656 P1628EX, 15.5TP 28" Two-Stage Snowthrower (CE/Export) 1695657 P1732EX, 16.5GT 32" Snowthrower (CE/Export) 1695658

More information

ADI-2 2-ROW DIGGER / INVERTER

ADI-2 2-ROW DIGGER / INVERTER ADI- -ROW DIGGER / INVERTER CAT6 st Edition Beginning Serial No: 0000 Owner's Name Dealer's Name Serial Number Date Purchased Model No. TABLE OF CONTENTS CAT6 st Edition July, 0 ADI - -Row Digger/Inverter

More information

Drive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733

Drive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733 Drive End Bracket & Bearing #865089 1 06409700 1" Lock Collar 2 865733 Drive Bracket w/ Bearing 3 310037 End Drive Shaft Drive End Bracket #865733 1 03003100 Bearing 1" w/snap Ring 2 957795 Drive End Bracket

More information

TT4100 Rotary Tedder

TT4100 Rotary Tedder TT0 Rotary Tedder Serial numbers 0 and higher Illustrated Parts Breakdown Page Page Tongue Assembly S/N - Tongue Assembly S/N to Page Page Page Page Page Tongue Assembly S/N to Tongue Assembly S/N + Main

More information

YARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4

YARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 Parts Manual for HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 MODEL HZS15423KVE HZS18483BVE YZ16424BVE YZ20484BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,

More information

H.I.T Truck Tire Changer. Parts Identification

H.I.T Truck Tire Changer. Parts Identification H.I.T. 6000 Truck Tire Changer READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors

More information

Parts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

Parts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable

More information

4. TRANSMISSION 1. SAFETY 2. PREPARATION 3. FRAME 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT Monosem Inc.

4. TRANSMISSION 1. SAFETY 2. PREPARATION 3. FRAME 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT Monosem Inc. TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TRANSMISSION 3-point Mounted, 7" x 7", and Stacking Toolbar Frame PLANTING RATE CHART 3pt

More information

I Illustrated Parts List CRT B. Tiller. Repair Parts Manual

I Illustrated Parts List CRT B. Tiller. Repair Parts Manual Illustrated Parts List 15-12 I502012 CRT 1 54001152B Repair Parts Manual Tiller HANDLE ASSEMBLY 1 711100 Screw, Pan Hd. #10-24 UNC 2 53212656 Panel, Control 3 532104164 Tie, Cable 4 53212477 Grip, Handle

More information

PARTS LISTS AND DIAGRAMS

PARTS LISTS AND DIAGRAMS PARTS LISTS AND DIAGRAMS Duetz-Allis Gleaner Combine Crary Company 237 NW 12th St. PO Box 849 West Fargo, ND 58078-0849 (800)247-7335 FAX: (701)282-9522 www.crary.com Part #12088 Companion to Part #12071

More information

Parts Manual Rev. B RZT48 /

Parts Manual Rev. B RZT48 / 115 91 36-2 Rev. B Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%

More information

Reproduction. Not for PARTS LIST. Models. Manual Part No

Reproduction. Not for PARTS LIST. Models. Manual Part No PARTS LIST Models Mfg. No. Description 1696063 ML761650, Murray 16.5TP 30" Dual Stage Snowthrower, CE (2011) Revision - Manual Part No. Rev. Date: 5/17/2011 Table Of Contents PRODUCT COMPONENTS PAGES

More information

Reproduction. Not for PARTS LIST. Models. Manual Part No Mfg. No. Description ML761650, 16.5TP 30" Dual Stage Snowthrower, CE (2010)

Reproduction. Not for PARTS LIST. Models. Manual Part No Mfg. No. Description ML761650, 16.5TP 30 Dual Stage Snowthrower, CE (2010) PARTS LIST Models Mfg. No. Description 1695912 ML761650, 16.5TP 30" Dual Stage Snowthrower, CE (2010) Revision - Manual Part No. Rev. Date: 9/8/2010 Table Of Contents PRODUCT COMPONENTS PAGES Handles

More information

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES G Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,

More information

TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L

TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L INDEX Section L TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS TRANSPORT AUGER TUBE / UNDERCARRIAGE/ TF WHEEL MOVE L Description Page TF3, TF3, TF03, TF03 Basic Auger...L-3 TF, TF0 Basic Auger...L-

More information

Reproduction. Not for JOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION. Dual Stage Snowthrower 928E IPL

Reproduction. Not for JOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION. Dual Stage Snowthrower 928E IPL JOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION Dual Stage Snowthrower 928E PARTS IPL1735371 MANUAL North American Edition Litho in USA Table Of Contents PRODUCT COMPONENTS PAGES Engine

More information

PIÈCES DÉTACHÉES ELT125D33 1KV. Tondeuse autoportée

PIÈCES DÉTACHÉES ELT125D33 1KV. Tondeuse autoportée PIÈCES DÉTACHÉES Tondeuse autoportée ELT15D33 1KV Yvan Béal - 1, av. de l Agriculture - B.P. 16 Z.I. du Brézet - 63014 Clermont-Ferrand Cedex Tél : 04 73 91 93 51 - Télécopie : 04 73 90 3 11 www.yvanbeal.fr

More information

42B350Z PARTS MANUAL

42B350Z PARTS MANUAL 4 2 B 3 5 0 Z PARTS MANUAL 64 56 68 2 48 45 30 47 62 26 38 7 35 33 65 43 42 6 16 26 40 31 1 23 14 5 16 19 36 21 20 27 28 24 26 66 22 44 28 29 28 68 34 30 29 32 39 13 17 14 15 12 5 3 4 57 55 54 61 59 60

More information

H.I.T Truck Tire Changer. Parts Identification

H.I.T Truck Tire Changer. Parts Identification H.I.T. 6000 Truck Tire Changer Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of

More information

Parts Manual Rev. A RZT54 /

Parts Manual Rev. A RZT54 / 115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of

More information

TT8101 Rotary Tedder

TT8101 Rotary Tedder TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel

More information

Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts

Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts 14.0 INTRODUCTION Tray Box Former This section lists and illustrates the replaceable assemblies and parts of the Tray Box Former as manufactured by Each parts list contains the component parts for that

More information

OPTIONAL EQUIPMENT. Section F INDEX

OPTIONAL EQUIPMENT. Section F INDEX INDEX Section F OPTIONAL EQUIPMENT Description Page Inclined hopper, H08-/ and H-/... F2- Straight hopper, SWH...F Swivel arc kit, A...F Wheel kit, H08-, H- and H1-...F Inclined hopper, S08-/, S-/ and

More information

PARTS CATALOG ODYSSEY INCLUDES MOWER

PARTS CATALOG ODYSSEY INCLUDES MOWER PARTS CATALOG 8-3350 ODYSSEY INCLUDES MOWER INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (P.I.N.) OR SERIAL NUMBERS (S/N) ENGINE MODEL, SERIAL AND SPECIFICATION NUMBERS TRACTOR MODEL

More information

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060

Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-622C (Gandy Part #6245DS-TT) Great Plains Turbo-Till & Turbo-Chopper 2400/3000 Models 45

More information

TT6101 Rotary Tedder

TT6101 Rotary Tedder TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame

More information

SCRAMBLER 33" & 38" HYDRO DRIVE YZ SERIES 5 & 6

SCRAMBLER 33 & 38 HYDRO DRIVE YZ SERIES 5 & 6 Parts Manual for SERIES 5 & 6 MODEL YZ16335BVE YZ16385BVE YZ18336BVE YZ18386BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 3, 7/26/2005 Table Of Contents

More information

PARTS PARTS SECTION FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6 CABLE DRUM... 8 TUNNEL (BAG BOOM OPTION) CONVEYOR GROUP...

PARTS PARTS SECTION FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6 CABLE DRUM... 8 TUNNEL (BAG BOOM OPTION) CONVEYOR GROUP... AG-BAGGER PART S MANUAL MODELS G-6000 A,B,C,D 2320 SE AG-BAG LANE WARRENTON, OR. 97146 INT L (503) 861-1644 US 1-800-334-7432 FAX (503) 861-2527 PARTS FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6

More information

72K850ZP PARTS MANUAL

72K850ZP PARTS MANUAL 7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL

More information

REAR ENGINE RIDER 42 MOWER SERIES 22

REAR ENGINE RIDER 42 MOWER SERIES 22 Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9

More information

BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS

BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS PARTS MANUAL BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306)

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00

More information

3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT

3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT FRAME 7" x 7" Stacker Bar STACKER BAR The Stacker Bar includes a heavy 3/8 wall tubing, 14

More information

NEVER STOP CORRUGATE OPENER

NEVER STOP CORRUGATE OPENER NEVER STOP CORRUGATE OPENER CORRUGATE OPENER PRE.-DELI VERY SET UP The Never Stop has been fully assembled and tested prior to delivery. Upon receipt of this machine it is necessary to check and tighten

More information

Parts Manual Rev. A RZT48 /

Parts Manual Rev. A RZT48 / 115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%

More information

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine. Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,

More information

REAR ENGINE RIDER SERIES 22

REAR ENGINE RIDER SERIES 22 Parts Manual for REAR ENGINE RIDER SERIES 22 MODELS 280922B W280922B 2822BE 281222BE 00922B 022BE W022BE 01222BE 14522BVE 1522KVE IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE

More information

! CAUTION! Before You Start. General Information. Assembly Instructions. Small Seeds Box Attachment Option. Assembly Instructions

! CAUTION! Before You Start. General Information. Assembly Instructions. Small Seeds Box Attachment Option. Assembly Instructions Used with: PS25120 Primary Seeder! PS25120 Primary Seeder Small Seeds Box Attachment Option When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your

More information

PARTS LISTING a WR

PARTS LISTING a WR 7 CRT 3 2.1 PARTS LISTING 54140066a WR 02-1- HANDLE ASSEMBLY 1 711100 Screw, Pan Hd. #10-24 UNC 2 53212656 Panel, Control 3 532104164 Tie, Cable 4 53212477 Grip, Handle 5 5321247 Clip, Hairpin 6 5320132

More information

Reproduction. Not for 30" STANDARD DECK REAR ENGINE RIDER SERIES 23. Parts Manual for

Reproduction. Not for 30 STANDARD DECK REAR ENGINE RIDER SERIES 23. Parts Manual for Parts Manual for 30" STANDARD DECK REAR ENGINE RIDER SERIES 23 Model No. Description 84873 301123BV 84875 301123BVE 7084941 3011523BV 7800103 3011523BV 7800648 3011523BV 84941 3011523BV 7085623 3012523BVE

More information

18 PARTS DRAWING VQ802SPH, VQ1002SP. Part No Form No. F021302G. Page 8 of 16

18 PARTS DRAWING VQ802SPH, VQ1002SP. Part No Form No. F021302G. Page 8 of 16 18 PARTS DRAWING VQ802SPH, VQ1002SP Part No. 830542 Form No. F021302G Page 8 of 16 Part No. 830542 Form No. F021302G Page 9 of 16 19 VQ1002SP VQ802SPH PARTS 1 ENGINE 10 HP INTEK B&S 430352 1 - - ENGINE

More information

Retriever 5100G/P. 11/89 revised 10/02 FORM NO

Retriever 5100G/P. 11/89 revised 10/02 FORM NO Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,

More information

Belts: 8.1 Page 1. Draper belts & tracking (non windrow)

Belts: 8.1 Page 1. Draper belts & tracking (non windrow) Belts: 8.1 Page 1. Draper belts & tracking (non windrow) Key Part No. Description Qty Remarks Page No. Revision 1 118-52101-06 Outer draper belt (21' CTF) N.B 2 118-52102-06 Outer draper belt (21' CTF)

More information

Parts Manual. Models Mfg. No. Description Brute, 14.5TP 29" Dual Stage Snowthrower (2012)

Parts Manual. Models Mfg. No. Description Brute, 14.5TP 29 Dual Stage Snowthrower (2012) Parts Manual Models Mfg. No. Description 1696282-00 Brute, 14.5TP 29" Dual Stage Snowthrower (2012) Manual Part No. 1756728 Revision C Rev. Date: 8/21/2013 Table Of Contents PRODUCT COMPONENTS PAGES Handles

More information