Pumps & Accessories catalogue

Transcription

1 PSC SYSTEMS COMPANY INC. Pumps & Accessories catalogue Phone: (800) Fax: (905) Website:

2 TABLE OF CONTENTS - pg. 1 CUSTOMER SERVICE DEPARTMENT parts@pscclean.com TRIGGER GUNS PG. 3-4 LANCES PG. 4 LANCE ASSEMBLIES PG. 5 NOZZLES PG. 5 HOSE ASSEMBLIES PG. 6-7 HOSE REELS PG. 7-8 CHEMICAL INJECTORS, APPLICATORS AND STRAINERS PG. 9 CONNECTORS AND SWIVELS PG. 10 BALL VALVES AND BALL VALVE ASSEMBLIES PG REGULATORS AND UNLOADERS PG AND SWITCHES PG. 12 GAUGES PG. 12 DRIVE COMPONENTS PG. 13 TEMPERATURE CONTROLLERS PG. 13 ACCUMULATORS/PULSATION DAMPENERS PG. 13 STRAINERS AND FILTERS PG. 14 LUBRICANTS PG. 14 MISCELLANEOUS ACCESSORIES PG. 14 GENERAL PLUNGER PUMPS PG CAT PLUNGER PUMPS PG CAT PISTON PUMPS PG PRATASSOLI PLUNGER PUMPS PG TECHNICAL DATA PG. 24 PSC s EQUIPMENT OVERVIEW PG. 25 THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. COPYRIGHT 2012 PSC CLEANING SYSTEMS INC., ALL RIGHTS RESERVED PSC Pressure Systems Company Inc Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com

3 TRIGGER GUNS ST1500 TRIGGER GUN : 5000 PSI RATE: 12 GPM TEMPERATURE: 300 F WEIGHT: 20.5 OZ INLET - OUTLET: 3/8 FNPT - 1/4 FNPT - STANDARD: WEEP: REPAIR KIT - STANDARD: WEEP: ST2000 TRIGGER GUN : 5000 PSI RATE: 12 GPM TEMPERATURE: 300 F WEIGHT: 26 OZ INLET - OUTLET: 3/8 FNPT - 1/4 FNPT : / REPAIR KIT: ST2605 RELAX ACTION TRIGGER GUN : 5000 PSI RATE: 12 GPM TEMPERATURE: 300 F WEIGHT: 21 OZ INLET-OUTLET: 3/8 FNPT - 1/4 FNPT : / REPAIR KIT: ST2700 SS RELAX ACTION TRIGGER GUN : 5000 PSI RATE: 12 GPM TEMPERATURE: 300 F WEIGHT: 21 OZ INLET-OUTLET: 3/8 FNPT - 1/4 FNPT : / REPAIR KIT: ST2705 RELAX ACTION TRIGGER GUN : 7300 PSI RATE: 8 GPM TEMPERATURE: 300 F WEIGHT: 22 OZ INLET-OUTLET: 3/8 FNPT - 1/4 FNPT ST3100 FOAM SPRAY GUN : 900 PSI RATE: 26 GPM TEMPERATURE: 176 F WEIGHT: 42.5 OZ INLET-OUTLET: 1/2 FNPT 1/2 FNPT : / REPAIR KIT: : / REPAIR KIT: ST601 TRIGGER GUN : 4000 PSI RATE: 12 GPM TEMPERATURE: 300 F WEIGHT: 23 OZ INLET-OUTLET: 3/8 FNPT - 1/4 FNPT - STANDARD: WEEP: REPAIR KIT - STANDARD: WEEP: ST3002 TRIGGER GUN : 7250 PSI RATE: 26 GPM TEMPERATURE: 300 F WEIGHT: 42.5 OZ INLET-OUTLET: 1/2 FNPT 1/2 FNPT : / REPAIR KIT:

4 TRIGGER GUNS G250V TRIGGER GUN : 4000 PSI RATE: 12 GPM : 350 PSI RATE: 14 GPM TEMPERATURE: 300 F WEIGHT: 25 OZ TEMPERATURE: 100 F WEIGHT: 28 OZ INLET - OUTLET: 3/8 FNPT - 1/4 FNPT INLET: 1/2 FNPT : / REPAIR KIT: : LANCES ST1200 TRIGGER GUN ST1200 TRIGGER GUN SINGLE LANCES DUAL LANCES 1/4 diameter zinc plated or stainless steel with solid or vented grip 4000 psi rated Part no. length material grip zinc plated steel solid zinc plated steel solid zinc plated steel solid zinc plated steel solid zinc plated steel solid zinc plated steel solid zinc plated steel solid SPECIALTY LANCES ST72 FOAM LANCE WITH AIR INJECTION 1/4 diameter zinc plated or stainless steel with solid or vented grip and hi/low valve 4000 psi Part no. length material grip zinc plated steel solid stainless steel vented SPECIALTY LANCES WATER BLASTING LANCES ST3002-L 38 (part no ) ST3002-L 19 (part no ) ½ mnpt x ¼ fnpt 10,000 psi rated Both used with ST3002 & ST3100 trigger gun With integral air ports and diffusers - max. 900 psi / 300 F Part no. length flow rate-gpm to to to 5.0 Part no. length material grip stainless steel side handle stainless steel side handle LANCE ACCESSORIES LANCE HANDLES FLEX WAND A C B industrial grade polyurethane flex section maximum pressure 2000 psi maximum temperature 200 f inlet & outlet 1/4 mnpt A lance handle for molded grip - part no B lance handle for any ¼ lance - part no C shoulder support for st2605/st2700/st2705 guns - part no D shoulder support - part no D

5 Lance assemblies SLG (SINGLE LANCE GUN) ASSEMBLIES DLG (DUAL LANCE GUN) ASSEMBLIES SLG ASSEMBLY WITH ST1500 TRIGGER GUN, 36 LANCE AND NOZZLE DLG ASSEMBLY WITH ST1500 TRIGGER GUN, 38 LANCE AND NOZZLES EZ-SLG ASSEMBLY WITH ST2605 TRIGGER GUN, 36 LANCE AND NOZZLE EZ-DLG ASSEMBLY WITH ST2605 TRIGGER GUN, 38 LANCE AND NOZZLES SLG-SS ASSEMBLY WITH ST2700 TRIGGER GUN, DLG-SS ASSEMBLY WITH ST2605 TRIGGER GUN, 36 LANCE AND NOZZLE 40 LANCE AND NOZZLES *SPECIFY NOZZLE SIZE WHEN ORDERING NOZZLES THREADED NOZZLES QUICK CONNECT NOZZLES ROTARY NOZZLES HARDENED STAINLESS STEEL CONSTRUCTION 0, 15, 25 OR 40 FAN PATTERN 1/8 OR 1/4 MNPT THREADS SEE PRICE LIST FOR PART NUMBERS DOUBLE NOZZLE HOLDER HARDENED STAINLESS STEEL CONSTRUCTION 0, 15, 25 OR 40 FAN PATTERN 1/4 QUICK CONNECT DESIGN SEE PRICE LIST FOR PART NUMBERS ADJUSTABLE NOZZLE HOLDER A B ST357 SERIES (A) MAX PSI, 190 F - 1/4 FNPT ST457 SERIES (B) MAX PSI, 212 F - 1/4 FNPT SEE PRICE LIST FOR PART NUMBERS MRI ADJUSTABLE NOZZLE MAXIMUM 2900 PSI / 10.5 GPM / 300 F INLET & OUTLETS (2) 1/4 FNPT NOZZLE STRAINERS MAXIMUM 3600 PSI / 8 GPM / 300 F INLET & OUTLET 1/4 FNPT PIPE CLEANING NOZZLES ADJUSTABLE FAN PATTERN FROM 0 TO 60 HIGH OR LOW SELECTION MAXIMUM 3000 PSI / 5.5 GPM / 140 F INLET SIZE 1/4 BSP-F MAXIMUM 5000 PSI / 8 GPM / 190 F 1/4 FNPT BUSHING 1/4 QC PLUG X 1/4 MNPT /4 FNPT X 1/4 MNPT EFFECTIVE FOR CLEANING PIPES UP TO 6 IN. DIAMETER ORFICE SIZE THREAD SIZE ROTATING /8 IN. F NO /4 IN. F NO /4 IN. F NO /4 IN. F NO /4 IN. F NO /4 IN. F YES *SBH WET SANDBLASTING KIT FOR WET SANBLASTING USES DRY AND SIFTED QUARTZ OR SILICA SAND WITH 15FT SUCTION HOSE SPIGOT & QUICK CONNECT

6 HIGH WASH & CONNECTION HOSES HOSES & ASSEMBLIES DRAIN & PIPE CLEANING HOSES ST36 SLUDGE SUCTION HOSE 3000 PSI TO PSI RATED ASSEMBLIES AVAILABLE STANDARD, FOOD-GRADE OR STEAM RATED OR NON-MARKING UP TO 3000 PSI RATED ASSEMBLIES IDEAL FOR SMALL DIAMETER DRAIN AND PIPE CLEANING UP TO 4000 PSI CONNECTION 104 F TEMPERATURE RATING 11:1 RATIO (WATER) DUTY INNER DIAMETER LENGTH MAX. OPERATING FITTING SIZE (INCHES) MAX. TEMPERATURE PRESS. WASH 3/8 IN. 15 FT PSI 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 IN. 30 FT PSI 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 IN. 50 FT PSI 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 IN. 75 FT PSI 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 IN. 100 FT PSI 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 IN. 200 FT PSI 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 1/2 IN. 50 FT PSI 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 1/2 IN. 75 FT PSI 1/2 M X 1/2 M -20 TO 250 F PRESS. WASH 1/2 IN. 100 FT PSI 1/2 M X 1/2 M -20 TO 250 F PRESS. WASH 1/2 IN. 50 FT PSI 1/2 M X 1/2 M -20 TO 250 F STEAM 3/8 IN. 35 FT. 500 PSI 3/8 M X 1/2 M 300 F STEAM 1/2 IN. 50 FT. 500 PSI 3/8 M X 1/2 M 300 F NOTE: NON-MARKING HOSE COVER, ask for Yellow hose (c/w R&S & Guards) PRESS. WASH 3/8 in psi 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 in psi 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 in psi 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 in psi 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 in psi 3/8 M X 3/8 M -20 TO 250 F NON-MARKING HOSE COVER, BLUE (Food Grade) PRESS. WASH 3/8 in psi 3/8 M X 3/8 M -20 TO 250 F PRESS. WASH 3/8 in psi 3/8 M X 3/8 M -20 TO 250 F SEWER HOSES PRESS. WASH 1/8 in psi -20 TO 250 F PRESS. WASH 1/8 in psi -20 TO 250 F HIGH CONNECTION HOSES DUTY PRESS. WASH PRESS WASH PRESS WASH PRESS WASH PRESS WASH PRESS. WASH INNER DIAMETER LENGTH MAX. OPERATING FITTING SIZE (INCHES) MAX. TEMP 3/8 IN. 26 IN PSI 3/8 M X 3/8 M 250 F 3/8 IN. 36 IN PSI 3/8 M X 3/8 M 250 F 3/8 IN. 48 IN PSI 3/8 M X 3/8 M 250 F 3/8 IN. 60 IN PSI 3/8 M X 3/8 M 250 F 3/8 IN. 72 IN PSI 3/8 M X 3/8 M 250 F 1/2 IN. 72 IN PSI 1/2 M X 1/2 M 250 F

7 DRAIN CLEANING & PIPE CLEANING HOSES DUTY INNER DIAMETER LENGTH MAX. OPERATING FITTING SIZE (INCHES) PIPE CLEANING 1/8 IN. 50 FT PSI 1/8 M X 1/8 M PIPE CLEANING 1/8 IN. 100 FT PSI 1/8 M X 1/8 M PIPE CLEANING 1/4 IN. 50 FT PSI 1/4 M X 1/4 M PIPE CLEANING 1/4 IN. 100 FT PSI 1/4 M X 1/4 M DCK1 PIPE CLEANING 1/8 IN. 50 FT PSI 1/4 F DCK2 PIPE CLEANING 1/8 IN. 100 FT PSI 1/4 F DCK3 PIPE CLEANING 1/4 IN. 50 FT PSI 1/4 F DCK4 PIPE CLEANING 1/4 IN. 100 FT PSI 1/4 F SLUDGE SUCTION HOSE SPECIFY HIGH NOZZLE SIZE WHEN ORDERING DUTY INNER DIAMETER LENGTH MAX. OPERATING INLET FITTING MAX. TEMPERATURE SLUDGE REMOVAL 1-1/2 IN. 25 FT PSI 1/4 IN. M Q.C. 200 F IN ADDITION TO THE HOSES SHOWN ABOVE, A FULL RANGE OF HIGH AND LOW HOSES & LENGTHES ARE AVAILABLE FOR VIRTUALLY ANY APPLICATION. CONTACT OUR CUSTOMER SERVICE DEPARTMENT FOR INFORMATION AND PRICING.

8 MANUAL REWIND HOSE REELS HOSE REELS MANUAL REWIND 360 PIVOTING HOSE REELS HOSE CAPACITY MODEL 3/8 IN. I.D. HOSE 1/2 IN I.D. HOS HRA * SHOWN WITH OPTIONAL HOSE AND QUICK CONNECT EEL CAPACITIES MAY VARY NDING ON HOSE BRAND AND TYPE * SHOWN WITH OPTIONAL HOSE AND QUICK CONNECT HRA16 / IN. DIAMETER DRUM DURABLE POWDER COAT PAINT FINISH CAM LEVER BRAKE WITH REEL LOCK UP TO 5000 PSI / 300 F INCLUDES UNIVERSAL MOUNTING BRACKET IN. DIAMETER DRUM IN. DIAMETER DRUM DURABLE POWDER COAT PAINT FINISH CAM LEVER BRAKE WITH PIVOT & REEL LOCK UP TO 5000 PSI / 300 F OPTIONAL WALL MOUNTING BRACKET AVAILABLE T SERIES SPRING REWIND HOSE REELS MP SERIES SPRING REWIND HOSE REELS - STAINLESS T SERIES - STANDARD * SHOWN WITH OPTIONAL HOSE AND HOSE STOP MAXIMUM HOSE MODEL CAPACITY X 3/8 ID X 3/8 ID X 3/8 ID X 3/8 ID SUPREME-DUTY REEL WITH ADJUSTABLE GUIDE ARMS, SIX- ROLLER NON-SNAG HOSE GUIDE AND 1 IN. SELF LUBRICATING BEARING FULL SWIVEL JIONT AND 8 POSITION LOCKING RATCHET SOLID 1 IN. STEEL CENTRE SUPPORT SHAFT DURABLE POWDER COAT PAINT FINISH MODEL MP SERIES STAINLESS STEEL MAXIMUM HOSE CAPACITY X 3/8 ID X 1/2 ID SUPREME-DUTY REEL WITH ADJUSTABLE GUIDE ARMS, SIX- ROLLER NON-SNAG HOSE GUIDE AND 1 IN. SELF LUBRICATING BEARING FULL SWIVEL JOINT AND 8 POSITION LOCKING RATCHET SOLID 1 IN. STEEL CENTRE SUPPORT SHAFT 316 STAINLESS STEEL SWIVEL AND AXEL. 304 STAINLESS STEEL DRUM AND BASE WITH ELECTROLYTIC POLSH PROCESS IN ADDITION TO THE MODELS SHOWN ABOVE, A FULL RANGE OF HIGH AND LOW HOSE REELS IS AVAILABLE FOR VIRTUALLY ANY APPLICATION. CONTACT OUR CUSTOMER SERVICE DEPARTMENT FOR INFORMATION AND PRICING.

9 CHEMICAL INJECTORS, APPLICATORS & STRAINERS ADJUSTABLE CHEMICAL & ACID INJECTORS STAINLESS STEEL CHEMICAL INJECTORS ADJUSTABLE UPSTREAM CHEMICAL INJECTORS MAXIMUM 4500 PSI / 195 F ADJUSTABLE CHEMICAL DRAW UP TO 20% BRASS CONSTRUCTION STANDARD INJECTOR WITH BUNA-N O- RING AND STAINLESS STEEL BALL ACID INJECTOR WITH TEFLON O-RING AND CERAMIC BALL INLET / OUTLET 3/8 IN. NPTM HOSE BARB 1/4 IN. ADJUSTABLE CHEMICAL INJECTOR ORFICE CS1 / CS1-3 REMOTE CHEMICAL STATIONS GPM MM 1.0 TO 2.0 GPM MM 2.0 TO 3.0 GPM MM 3.0 TO 5.0 GPM MM 5.0 TO 8.0 GPM REPAIR KIT ADJUSTABLE ACID INJECTOR ORFICE GPM MM 1.0 TO 2.0 GPM MM 2.0 TO 3.0 GPM MM 3.0 TO 5.0 GPM MM 5.0 TO 8.0 GPM REPAIR KIT MAXIMUM 5100 PSI / 195 F ADJUSTABLE CHEMICAL DRAW STAINLESS STEEL CONSTRUCTION WITH TEFLON O-RING AND STAINLESS STEEL BALL INLET / OUTLET 3/8 IN. BSPM HOSE BARB 1/4 IN. STAINLESS STEEL INJECTOR ORFICE CHEMICAL STRAINERS A B C (A) METERING VALVE FOR ST261 UNLOADER (B) / CHEMICAL STRAINER ( WITH CHECK VALVE) 1/4 IN. AND 3/8 IN. HOSE BARB (C) CHEMICAL STRAINER 1/4 IN. HOSE BARB CS2 CHEMICAL APPLICATOR GPM MM 2.6 TO 4.0 GPM MM 4.0 TO 5.3 GPM ADJUSTABLE CHEMICAL DRAW BRASS CONSTRUCTION SEE PRICE LIST FOR PART NUMBERS AND RATES IN-LINE CHEMICAL INJECTOR WATER PRESS. 202B 203B 206B PSI * * * * * SPECIFY S.S. KNOB FOR EXCEEDING 750 PSI (I.E. 202BS) MAXIMUM INJECTION OUNCES PER MINUTE FLUID VISC. 202B 203B 206B CPS PIPE SIZE NPT 3/8 IN. 3/8 IN. 1/2 IN. ADJUSTABLE FOAM APPLICATORS INSTANTANEOUS CHANGE FROM CHEMICAL TO RINSE HIGH BRASS OR STAINLESS STEEL INJECTOR ALLOWS FOR ADJUSTABLE OR FIXED CHEMICAL DRAW PSI AND PSI MODELS AVAILABLE FOR USE WITH CLS/CLS-3 CLEANING STATION ASSEMBLY SPECIFY RATE WHEN ORDERING LOW APPLICATOR ALLOWS FOR ADJUSTABLE OR FIXED CHEMICAL APPLICATION WITHSTANDS MOST ACIDIC AND ALKALI CHEMICALS 24 IN. SPRAY WAND WITH 50 FT. X 1/2 IN. HOSE INCLUDES MOUNTING BRACKET WITH U BOLTS (A) FOAMER LANCE WITH 1.5 MM INJECTOR (B) FOAMER LANCE WITH 1.5 MM INJECTOR AND 1 QUART TANK A B

10 CONNECTORS & SWIVELS QUICK CONNECT PLUGS AND SOCKETS ST40 SCREW COUPLINGS ST41 SCREW NIPPLES A (A) ZINC PLATED PLUGS NOTE: STAINLESS STEEL AVAILABLE UPON REQUEST (B) BRASS SOCKETS WITH BUNA-N O- 0RING Q.C. SOCKETS THREAD SIZE /4 MNPT /4 FNPT /8 MNPT /8 FNPT Q.C. PLUGS THREAD SIZE /4 FNPT /4 MNPT /8 FNPT /8 MNPT B USED WITH ST41 SCREW NIPPLES MAXIMUM 5800 PSI OPERATING MAXIMUM 300 F TEMPERATURE RATING THREAD SIZE /4 MNPT /4 FNPT /8 MNPT /8 FNPT ST44 SWIVEL COUPLINGS USED WITH ST40 SCREW COUPLINGS MAXIMUM 5800 PSI OPERATING MAXIMUM 300 F TEMPERATURE RATING THREAD SIZE /4 FNPT /4 MNPT /8 FNPT /8 MNPT HIGH SWIVELS O-RINGS FOR SOCKETS / /8 MAXIMUM 5.2 GAL/MIN RATE MAXIMUM 5800 PSI OPERATING MAXIMUM 300 F TEMPERATURE RATING THREAD SIZE /4 MNPT /8 FNPT MAXIMUM 5.2 GAL/MIN RATE MAXIMUM OPERATING : PSI PSI MAXIMUM 300 F TEMPERATURE RATING THREAD SIZE /8 M X 3/8 F /8 M X 3/8 F BALL VALVES / BALL VALVE ASSEMBLIES 2 WAY BALL VALVES BRASS, CARBON STEEL OR STAINLESS STEEL CONSTRUCTION UP TP 6000 PSI RATED HIGHER VALVES AVAILABLE UPON REQUEST CLS / CLS-3 CLEANING STATION ASSEMBLY HIGH RATED MATERIAL THREAD SIZE-IN. MAX. PRESS. MAX. TEMP. LOCKABLE BODY BALL CARBON STEEL STAINLESS 1/4 F X 1/4 F 2000 PSI 110 F NO STAINLESS STAINLESS 3/8 F X 3/8 F 2000 PSI 180 F YES STAINLESS STAINLESS 3/8 F X 3/8 F 6000 PSI 250 F NO CARBON STEEL STAINLESS 1/2 F X 1/2 F 2000 PSI 110 F NO STAINLESS STAINLESS 1/2 F X 1/2 F 2000 PSI 180 F YES STAINLESS STAINLESS 1/2 F X 1/2 F 6000 PSI 250 F NO CLS STAINLESS STAINLESS 3/8 F X 3/8 F 2000 PSI 250 F NO CLS-3 STAINLESS STAINLESS 1/2 F X 1/2 F 6000 PSI 250 F NO

11 BALL VALVES / BALL VALVE ASSEMBLIES LOW RATED MATERIAL THREAD SIZE-IN. MAX. PRESS. MAX. TEMP. LOCKABLE BODY BALL BRASS NICKEL PLATED 1/4 F X 1/4 F 250 PSI 180 F NO BRASS NICKEL PLATED 3/4 F X 3/4 F 150 PSI 250 F NO BRASS STAINLESS 3/4 F X 3/4 F 600 PSI 260 F YES DBV2103-F BRASS NICKEL PLATED 1 F X 1 F 150 PSI 250 F NO BRASS STAINLESS 1 F X 1 F 600 PSI 260 F YES DBV2103-J BRASS NICKEL PLATED 1-1/4 F X 1-1/4 F 150 PSI 250 F NO DBV2103-H BRASS NICKEL PLATED 1-1/2 F X 1-1/2 F 150 PSI 250 F NO REGULATORS AND UNLOADERS TRAPPED UNLOADER VALVES * REMOVE CHECK VALVE FOR USE AS A REGULATOR * A B C D E F G (ITEM) SPRING COLOUR MAXIMUM RATED MAXIMUM INLET OUTLET BY-PASS (A) BLUE 7.8 GPM 3600 PSI 4000 PSI 3/8 IN. NPTF 3/8 IN. NPTF 3/8 IN. NPTF 195 F (A) WHITE 7.8 GPM 1450 PSI 1750 PSI (2) 3/8 IN. NPTF 3/8 IN. NPTF (2) 3/8 IN. NPTF 195 F (B) GREEN 21.0 GPM 4050 PSI 4350 PSI (2) 1/2 IN. NPTF 1/2 IN. NPTF (2) 1/2 IN. NPTF 200 F (B) WHITE 21.0 GPM 2175 PSI 2450 PSI (2) 1/2 IN. NPTF 1/2 IN. NPTF (2) 1/2 IN. NPTF 200 F (C) BLACK 21.0 GPM 5800 PSI 6500 PSI (2) 1/2 IN. NPTF 1/2 IN. NPTF (2) 1/2 IN. NPTF 200 F MAXIMUM TEMP (D) BLUE 21.0 GPM 3000 PSI 3000 PSI 3/8 IN. BSPF 1/4 IN. BSPF & 3/8 IN. (2) 3/8 IN. BSPF 200 F (ITEM) INJECTOR ORFICE-MM MAXIMUM RATED MAXIMUM INLET BSPM OUTLET BY-PASS MAXIMUM TEMP (F) GPM 3600 PSI 3600 PSI 3/8 IN. NPTF 3/8 IN. NPTF 3/8 IN. NPTF 176 F (F) GPM 3600 PSI 3600 PSI 3/8 IN. NPTF 3/8 IN. NPTF 3/8 IN. NPTF 176 F (F) GPM 3600 PSI 3600 PSI 3/8 IN. NPTF 3/8 IN. NPTF 3/8 IN. NPTF 176 F (G) GPM 3600 PSI 3600 PSI 3/8 IN. NPTF 3/8 IN. NPTF 3/8 IN. NPTF 176 F (F) GPM 3600 PSI 3600 PSI 3/8 IN. NPTF 3/8 IN. NPTF 3/8 IN. NPTF 176 F (G) GPM 3600 PSI 3600 PSI 3/8 IN. NPTF 3/8 IN. NPTF 3/8 IN. NPTF 176 F REGULATOR AND UNLOADER VALVE REPAIR KITS REPAIR KIT NO. (ITEM) REPAIR KIT NO. REPAIR KIT NO (F) (F) (F) (G) (F) (G) /

12 REGULATORS AND UNLOADERS SENSITIVE UNLOADER VALVES REGULATING VALVE BALANCED RELIEF VALVE SAFETY RELIEF VALVE MAXIMUM 3000 PSI / INLET 3/8 IN. BSPF OUTLET 3/8 IN. BSPM BY-PASS 3/4 IN. BSPM/F RANGE TO 3.0 GPM TO 4.2 GPM TO 6.6 GPM TO 10.8 GPM TO 13.2 GPM MAXIMUM 870 PSI / MAXIMUM 53 GPM INLET 3/4 IN. BSPF OUTLET 1/2 IN. BSPF BY-PASS 1 IN. BSPF RATED 3200 PSI/MAX PSI MAXIMUM 6.3 GPM MAXIMUM TEMP. 195 F INLET (2) 3/8 IN. BSPF BY-PASS 3/8 IN. BSPF PN: REDUCTION VALVE REDUCES INLET PRSSURE FROM MAX. 400 PSI TO PSI MAXIMUM 10 GPM / INLET & OUTLET 3/4 IN. FGHT BY-PASS 3/4 IN. BSPM/F FOR USE ON SYSTEMS WITH UP TO 3000 PSI WORKING REQUIRES ADJUSTMENT TO 300 PSI ABOVE WORKING BRASS BODY WITH STAINLESS STEEL PISTON AND SPRING 1/2 IN. NPTM CONNECTION WITH SET SCREW AND 3/8 IN. HOSE BARB AND SWITCHES SWITCH SWITCH SWITCH GRAVITY ACTUATED MAXIMUM 3600 PSI / 8 GPM / 176 F MAXIMUM 400 VOLTS / 3.0 AMPS (100 WATTS) INLET / OUTLET 3/8 IN. FNPT X 3/8 IN. FNPT AL680 SWITCH SPRING ACTUATED WITH PILOT FEATURE MAXIMUM 4000 PSI / 165 F 0.75 GPM TO 6 GPM RATE - +6 GPM REQUIRES BY-PASS MAXIMUM 250 VOLTS / 3.0 AMPS INLET / OUTLET 3/8 IN. FNPT X 3/8 IN. FNPT ALL STAINLESS STEEL VERSION SWITCH SPRING ACTUATED MAXIMUM 3600 PSI / 8 GPM / 176 F MAXIMUM 400 VOLTS / 3.0 AMPS (100 WATTS) INLET / OUTLET 3/8 IN. FNPT X 3/8 IN. MNPT GAUGES GLYCERIN FILLED GAUGES MAXIMUM 3650 PSI SWITCH 435 PSI MAXIMUM TEMPERATURE 200 F VOLTAGE VOLT MAXIMUM AMPERAGE 15 AMPS THROTTLE CONTROL THROTTLE CONTROL FOR GASOLINE ENGINES RATED 725 PSI MAXIMUM 3000 PSI 3/8 IN. NPTM INLET ADJUSTABLE RANGE: DECREASING MIN..5 PSI MAX PSI / INCREASING MIN..6 PSI AMX. 15 PSI ELECTRICAL CONNECTION 1/2 IN. NPS CONDUIT CONNECTION TO SCREW TERMINALS ON SWITCH CONNECTION 1/4 IN. NPTF 24 VAC TO 250 VAC STAINLESS STEEL CASE WITH BRASS INTERNALS AND 2 IN. DIAMETER ACRYLIC WINDOW ACCURACY 1.5% OF SPAN 1/4 IN. NPTM BOTTOM MOUNT RANGE PSI PSI PSI PSI PSI

13 DRIVE COMPONENTS HIGHER RANGE GAUGES AVAILABLE PUMP PULLEYS GEAR REDUCERS CLUTCH DRIVES A PULLEYS - 2 GROOVE CAST ALUMINUM 24 MM BORE MM 3.9 PITCH MM 5.5 PITCH MM 6.3 PITCH PSC HAS A FULL LINE OF COMPONENTS AVAILABLE FOR VIRTUALLY ANY DRIVE-SYSTEM CONFIGURATION. CONTACT OUR CUSTOMER SERVICE DEPARTMENT FOR PRICING AND ASSISTANCE IN DETERMINING THE IDEAL COMPONENT PART(S) FOR YOUR REQUIREMENTS. TEMPERATURE CONTROLLERS THROUGH THERMOSTAT PROBE-STYLE THERMOSTAT PROBE-STYLE THERMOSTAT (WELL ) MAXIMUM 3000 PSI / 12 GPM 50 F TO 300 F RANGE FACTORY PRESET FOR MAXIMUM 200 F INLET & OUTLET 1/2 IN. NPTF SRA SURGE RELIEF ASSEMBLY 86 F TO 194 F RANGE F TO 302 F RANGE MAXIMUM 4000 PSI / 380 VOLT / 4 AMPS ACCUMULATORS/PULSATION DAMPENERS PDH PULSATION DAMPENER 100 F TO 240 F RANGE 5 F TO 45 F DIFFERENTIAL 4 IN. PROBE WELL WITH 1/2 IN. NPTM FITTING CONVERTIBLE FROM HORIZONTAL TO VERTICAL FOR USE IN 24, 120 & 240 VOLT CIRCUITS 6028 PULSATION DAMPENER SHOULD BE INSTALLED ON THE WATER SUPPLY LINE WHEN THE SUPPLY LINE HAS A BACK PREVENTER, REDUCING OR CHECK VALVE PRESENT MAXIMUM 150 PSI / 200 F 40 PSI AIR PRECHARGE RECHARGEABLE FACTORY SET SAFETY RELIEF VALVE INLET/OUTLET 3/4 IN. M X 3/4 IN. F GARDEN HOSE FITTINGS RATED MAXIMUM 10 GPM / 3000 PSI / 175 F 21 CU. IN. CAPACITY 580 PSI DRY NITROGEN PRECHARGE - RECHARGEABLE CARBON STEEL CONSTRUCTION PORT SIZE 1/2 IN. NPTF RATED MAXIMUM 15 GPM / 3000 PSI / 180 F 10 CU. IN. CAPACITY 450 PSI DRY NITROGEN PRECHARGE - SEALED POLY-STEEL CONSTRUCTION PORT SIZE 1/2 IN. NPTM CONTACT OUR CUSTOMER SERVICE DEPARTMENT FOR INFORMATION AND PRICING ON ACCUMULATORS AND PULSATION DAMPENERS RANGING UP TO 120 CU. IN. CAPACITY

14 STRAINERS & FILTERS GARDEN HOSE FILTER WASHER SUCTION FILTER WFI INLINE FILTER STAINLESS STEEL SCREEN WITH 3/4 IN. & 1 IN. HOSE BARB WITH CHECK VALVE AND 3/4 IN. & 1 IN. HOSE BARB 20 MESH INTAKE SCREEN ALUMINUM BODY WITH 50 MESH STAINLESS STEEL SCREEN MAXIMUM 145 PSI / 5.8 GPM / 175 F INLET X OUTLET 1/2 IN. BSP-F X 1/2 IN. BSP-M PN: SERIES INLINE FILTERS BOWL-TYPE LUBRICANTS cat crankcase oil is a special blend, multi-viscosity petroleum based hydraulic lubricant for high pressure hydraulic systems. non-detergent for greater wear and protection at high rpm and pressure. anti-wear, high pressure and oxidizer inhibitor additives for maximum protection and wear. runs significantly cooler than typical lubricants, enhancing the longevity of components. NYLON BODY WITH 304 SS MESH SCREEN INSIDE OUT DIRECTION ALLOWS SEDIMENT COLLECTION INSIDE OF SCREEN MAXIMUM 150 PSI / 150 F MAXIMUM SUCTION/ PORT SIZE DIMENSIONS INCHES GPM / 10 GPM 1/2 IN. 3.6X2.95X GPM / 20 GPM 3/4 IN. 3.6X2.95X GPM / 25 GPM 1 IN. 5.0X4.1X GPM / 75 GPM 1-1/2 IN. 5.13X4.1X8.13 SIZE U.S. OZ X 21 U.S. OZ U.S. GAL X 2.5 U.S. GAL. JETTER VALVE MISCELLANEOUS ACCESSORIES ANALOG HOUR METER TANK CLEANER FOR USE IN SEWER CLEANING APPLICATIONS REPLACES VALVE CAP APPLICATION USE WITH TT SERIES PUMPS USE WITH EZ SERIES PUMPS USE WITH 47 SERIES PUMPS HIGH QUALITY DESIGN WITH ACCURATE READOUT 24 VAC 2-3/4 IN. FACE 6 COUNT INDICATION INCLUDING 1/10 HOUR AIR-DRIVEN 4.0 TO 10.5 GPM MAXIMUM 2000 PSI ROTATING HEAD WITH 4 NOZZLES FOR SMALL OPENINGS REQUIRES GASKET AT PSC WE STOCK A WIDE RANGE OF ACCESSORIES FOR USE WITH VIRTUALLY ANY BRAND OF WASHER. CONTACT OUR CUSTOMER SERVICE DEPARTMENT IF THE ACCESSORY YOU NEED IS NOT SHOWN IN THIS CATALOGUE.

15 HIGH PLUNGER PUMPS-GENERAL (Contact us if your pump is not listed here) T9051EBF or T9051BA 2.11 GPM MAXIMUM 1500 PSI INLET 1750 BORE STROKE OZ. 1/4 NPTF TT9061EBF or TT9061BA 2.11 GPM MAXIMUM 1500 PSI INLET 3400 BORE STROKE OZ. 1/4 NPTF TT9071EBF or TT9071BA 2.8 GPM MAXIMUM 1500 PSI INLET 3400 BORE STROKE OZ. 1/4 NPTF T9951 or T9951B 3.5 GPM MAXIMUM 1500 PSI INLET 1750 STROKE OZ. TT2035GBF 3.5 GPM MAXIMUM 2000 PSI INLET 3400 BORE STROKE OZ. 1/4 NPTF T GPM MAXIMUM 1500 PSI INLET 1450 STROKE OZ. EZ2542E or W959BH 4.2 GPM MAXIMUM 2500 PSI INLET 1750 BORE STROKE OZ. EZ3040G or WW961BC 4.0 GPM MAXIMUM 3000 PSI INLET 3400 BORE STROKE OZ. TS GPM MAXIMUM 2000 PSI INLET 1450 STROKE OZ.

16 TS GPM MAXIMUM 3500 PSI INLET 1450 STROKE OZ. T1321 ot T1321B 5.5 GPM MAXIMUM 2100 PSI INLET 1150 BORE STROKE OZ. T9211 ot T9211B 4 GPM MAXIMUM 3000 PSI INLET 1750 STROKE OZ. TS2021 or TS2021BN 5.6 GPM MAXIMUM 3500 PSI INLET 1450 BORE STROKE OZ. TS1041 or TS1041B 8 GPM MAXIMUM 1600 PSI INLET 1450 STROKE OZ. TS GPM MAXIMUM 2175 PSI INLET 1450 STROKE OZ. T GPM MAXIMUM 2500 PSI INLET 1080 BORE STROKE OZ. INLET PORTS (4) DISCHARGE PORTS (4) T GPM MAXIMUM 3000 PSI INLET 1140 STROKE OZ. INLET PORTS (4) DISCHARGE PORTS (4) T GPM MAXIMUM 5000 PSI INLET 1845 BORE STROKE OZ.

17 HIGH PLUNGER PUMPS CAT (Contact us if your pump is not listed here) 2SFX29ELS 2.85 GPM MAXIMUM 1500 PSI INLET -2 TO 75 PSI 1725 BORE STROKE OZ. INLET PORT (1) SHAFT (HOLLOW) 5/8 WEIGHT (PUMP ONLY) 10.6 LBS. 2SFX22ES 2.2 GPM MAXIMUM 2500 PSI INLET -2 TO 75 PSI 3450 BORE STROKE OZ. INLET PORT (1) SHAFT (HOLLOW) 5/8 WEIGHT (PUMP ONLY) 10.6 LBS. 2SFX30GS 3 GPM MAXIMUM 2000 PSI INLET -2 TO 75 PSI 3450 BORE STROKE OZ. INLET PORT (1) SHAFT (HOLLOW) 3/4 WEIGHT (PUMP ONLY) 10.6 LBS. 4SF40ELS 4 GPM 3500 PSI INLET FLOODED TO 60 PSI 1725 STROKE OZ. INLET PORT (1) BY-PASS PORT (1) SHAFT (HOLLOW) 1 1/8 4SF45ELS 4.5 GPM 3000 PSI INLET FLOODED TO 60 PSI 1725 STROKE OZ. INLET PORT (1) BY-PASS PORT (1) 4SF40GS1 4 GPM 3500 PSI INLET FLOODED TO 60 PSI 3200 STROKE OZ. INLET PORT (1) BY-PASS PORT (1) SHAFT (HOLLOW) 1 3CP GPM 100 TO 2200 PSI INLET FLOODED TO 60 PSI 1725 BORE STROKE OZ. 5CP GPM 100 TO 3000 PSI INLET FLOODED TO 60 PSI 1415 BORE STROKE OZ. 5CP GPM 100 TO 1600 PSI INLET FLOODED TO 60 PSI 1450 STROKE OZ.

18 HIGH PLUNGER PUMPS-CAT (Contact us if your pump is not listed here) 7CP GPM 100 TO 2000 PSI INLET 1450 BORE STROKE OZ. 140 F GPM 100 TO 2200 PSI INLET -5 TO +60 PSI 950 STROKE OZ GPM 100 TO 3000 PSI INLET -5 TO +60 PSI 1415 BORE STROKE OZ GPM 100 TO 3000 PSI INLET -5 TO +60 PSI 1000 STROKE OZ GPM* 100 TO 3000 PSI* INLET +10 TO +60 PSI 1429 STROKE OZ. SHAFT DIAMETER (D-END) WEIGHT 44 LBS GPM 100 TO 2200 PSI INLET -5 TO +60 PSI 958 BORE STROKE OZ GPM 100 TO 1200 PSI INLET 914 BORE STROKE OZ. 1 1/4 NPTF GPM 100 TO 5000 PSI INLET 800 STROKE OZ GPM 100 TO 3000 PSI INLET 800 BORE STROKE OZ. 1

19 HIGH PLUNGER PUMPS CAT (Contact us if your pump is not listed here) GPM 100 TO 2000 PSI INLET 800 BORE STROKE OZ GPM 100 TO 1200 PSI INLET 800 BORE STROKE OZ GPM 100 TO 1000 PSI INLET 800 BORE STROKE OZ. 140 F GPM 100 TO 1200 PSI INLET 800 STROKE OZ GPM 100 TO 3000 PSI INLET 800 BORE STROKE OZ GPM 100 TO 2000 PSI INLET 800 BORE STROKE OZ GPM 100 TO 1200 PSI INLET 800 BORE STROKE OZ GPM 100 TO 5000 PSI INLET FLOODED TO 50 PSI 600 BORE STROKE OZ. 120 F GPM 100 TO 3000 PSI INLET FLOODED TO 50 PSI 615 BORE STROKE OZ. 120 F 1

20 HIGH PLUNGER PUMPS CAT (Contact us if your pump is not listed here) GPM 100 TO 2300 PSI INLET FLOODED TO 50 PSI 625 BORE STROKE OZ. 140 F GPM 100 TO 2000 PSI INLET FLOODED TO 50 PSI 615 BORE STROKE OZ. 120 F 2 1 1/4 NPTF GPM 100 TO 1200 PSI INLET FLOODED TO 60 PSI 520 BORE STROKE OZ. 120 F 2 1 1/4 NPTF 150R060-CARBON STEEL 151R060-STAINLESS STEEL 152R060-DUPLEX SS SPECIFICATIONS STANDARD ALTERNATE API 100 GPM 115 GPM 86 GPM 2700 PSI 2300 PSI 2700 PSI 310 COMMON SPECIFICATIONS INLET FLOODED TO 50 PSI MINIMUM 75 BORE 2.36 STROKE F 22.4 GAL. 6.0 NPTF 4.0 NPTF SHAFT DIAMETER (D-END) SHAFT LENGTH HIGH PISTON PUMPS CAT GPM 100 TO 1000PSI INLET 1330 STROKE OZ. INJECTION PORT (1) 1/4 NPTF DISCHARGE PORTS (1) GPM 100 TO 1200 PSI INLET 1200 STROKE OZ. INJECTION PORT (1) 1/4 NPTF DISCHARGE PORTS (1) GPM 100 TO 1200 PSI INLET 1070 BORE STROKE OZ. INJECTION PORT (1) 1/4 NPTF DISCHARGE PORTS (1)

21 HIGH PISTON PUMPS CAT (Contact us if your pump is not listed here) GPM 100 TO 1500PSI INLET 1000 BORE STROKE OZ. INJECTION PORT (1) 1/4 NPTF DISCHARGE PORTS (3) GPM 100 TO 1000 PSI INLET 1040 STROKE OZ. DISCHARGE PORTS (3) 3/4 NPTF GPM 100 TO 1200 PSI INLET 850 STROKE OZ. DISCHARGE PORTS (3) GPM 100 TO 1000PSI INLET 940 BORE STROKE OZ. DISCHARGE PORTS (3) GPM 100 TO 700 PSI INLET 900 BORE STROKE OZ. DISCHARGE PORTS (3) 3/4 NPTF GPM 100 TO 1000 PSI INLET 830 BORE STROKE OZ. 1 1/4 NPTF DISCHARGE PORTS (3) GPM 100 TO 800PSI INLET 772 BORE STROKE OZ. 1 1/4 NPTF DISCHARGE PORTS (3) 2520C HI-TEMP COOLED INLET 25 GPM 100 TO 800PSI INLET 772 BORE STROKE OZ. 210 F 1 1/4 NPTF DISCHARGE PORTS (3) CIRCULATING PORTS (2) 1/4 NPTF COOLING FLUID CAPACITY 1.6 QTS GPM 100 TO 1000 PSI INLET 500 BORE STROKE OZ. 2 NPTF DISCHARGE PORTS (3) 1 1/4 NPTF SHAFT DIAMETER (D-END) WEIGHT 235 LBS.

22 INLET GPM 100 TO 5000PSI 500 BORE STROKE OZ. 140 F 2 NPTF DISCHARGE PORTS (3) SHAFT DIAMETER (D-END) WEIGHT 265 LBS. DIMENSIONS 31.4 X 24.0 X 17.1 HIGH PISTON PUMPS PRATASSOLI DIMENSIONS 35.3 X 24.0 X 17.1 *PUMP SHOWN WITH OPTIONAL OILERS INLET GPM 100 TO 1500 PSI 500 BORE STROKE OZ. 2 NPTF DISCHARGE PORTS (3) 1 1/4 NPTF SHAFT DIAMETER (D-END) WEIGHT 235 LBS. *PUMP SHOWN WITH OPTIONAL OILERS INLET GPM 100 TO 3000 PSI 500 BORE STROKE OZ. 140 F 2 NPTF DISCHARGE PORTS (3) SHAFT DIAMETER (D-END) WEIGHT 265 LBS. DIMENSIONS 35.3 X 24.0 X 17.1 *PUMP SHOWN WITH OPTIONAL OILERS EK SERIES MAX. INLET : 45 PSI MAX. FLUID TEMPERATURE: 140 F INLET PORT THREAD: 1 IN. BSP-F DISCHARGE PORT THREAD: 3/4 IN. BSP-F SHAFT DIAMETER: IN./30 MM PUMP DIMENSIONS: 18.2 IN. X 17.5 IN. X 7.3 IN. : 100 OZ. STROKE: IN./40 MM SHIPPING WEIGHT: 120 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI EK IN./18 MM 4.8 EK IN./20 MM 4.8 EK IN./22 MM 4.9 EK IN./25 MM 4.9 EK IN./30 MM 4.9 HD SERIES MAX. INLET : 45 PSI MAX. FLUID TEMPERATURE: 140 F INLET PORT THREAD: 1 IN. BSP-F DISCHARGE PORT THREAD: 3/4 IN. BSP-F SHAFT DIAMETER: IN./35 MM PUMP DIMENSIONS: 20.4 IN. X 17.7 IN. X 8.1 IN. : 127 OZ. STROKE: IN./40 MM SHIPPING WEIGHT: 145 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI HD IN./18 MM 4.8 HD IN./20 MM 4.8 HD IN./22 MM 4.9 HD IN./25 MM 5.1 KL SERIES MAX. INLET : 45 PSI MAX. FLUID TEMPERATURE: 140 F INLET PORT THREAD: 1 1/2 IN. NPT-F DISCHARGE PORT THREAD: 1 IN. NPT-F SHAFT DIAMETER: IN./35 MM PUMP DIMENSIONS: 19 IN. X 17.7 IN. X 8.4 IN. : 127 OZ. STROKE: IN./40 MM SHIPPING WEIGHT: 155 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI KL IN./30 MM 5.4 KL IN./33 MM 5.7 KL IN./36 MM 6.0 KL IN./40 MM 5.7 KL IN./45 MM 6.0 MS SERIES KL50 MAX. INLET 43.3 : 45 PSI 1150 MAX. FLUID TEMPERATURE: F IN./50 MM 5.8 INLET PORT THREAD: 2 1/2 IN. NPT-F DISCHARGE PORT THREAD: 1 1/4 IN. NPT-F SHAFT DIAMETER: IN./70 MM PUMP DIMENSIONS: 27.7 IN. X 23.8 IN. X 11.9 IN. CRANKCASE MODEL NO. CAPACITY: -GPM 333 OZ. STROKE: -PSI IN./60 MM SHIPPING WEIGHT: BORE 570 LBS. MIN. INLET-PSI MS IN./36 MM 6.5 MS IN./40 MM 6.8 MS IN./45 MM 7.1 MS IN./50 MM 7.6 MS IN./55 MM 7.8

23 HIGH PISTON PUMPS PRATASSOLI (Contact us if your pump is not listed here) MSN SERIES MAX. INLET : 45 PSI MAX. FLUID TEMPERATURE: 140 F INLET PORT THREAD: 2 1/2 IN. BSP-F DISCHARGE PORT THREAD: 1 1/4 IN. BSP-F SHAFT DIAMETER: IN./50 MM PUMP DIMENSIONS: 27.7 IN. X 23.8 IN. X 11.7 IN. : 333 OZ. STROKE: IN./60 MM SHIPPING WEIGHT: 650 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI MSN3615R IN./36 MM 6.5 MSN3618R IN./36 MM 6.5 MSN4015R IN./40 MM 6.8 MSN4018R IN./40 MM 6.8 MSN4515R IN./45 MM 7.1 MSN4518R IN./45 MM 7.1 MSN5015R IN./50 MM 7.6 MSN5018R IN./50 MM 7.6 VH SERIES MAX. INLET : 45 PSI MAX. FLUID TEMPERATURE: 140 F INLET PORT THREAD: 90 MM BSP-F DISCHARGE PORT THREAD: 1 1/4 IN. BSP-F SHAFT DIAMETER: IN./50 MM PUMP DIMENSIONS: 33.3 IN. X 28.2 IN. X 13.5 IN. : 467 OZ. STROKE: IN./72 MM SHIPPING WEIGHT: 880 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI MH4515R IN./45 MM 5.2 MH4518R IN./45 MM 5.2 MH5015R IN./50 MM 5.4 MH5018R IN./50 MM 5.4 MH5515R IN./55 MM 5.5 MH5518R IN./55 MM 5.5 MH6015R IN./60 MM 5.8 MH6018R IN./60 MM 5.8 VH MH6515R1-5 SERIES MAX. INLET : PSI MAX FLUID TEMPERATURE: F IN./65 MM 6.1 INLET PORT THREAD: 3/4 IN. BSP-F DISCHARGE PORT THREAD: 1/2 IN. BSP-F MH6518R IN./65 MM 6.1 SHAFT DIAMETER: IN./35 MM PUMP DIMENSIONS: 22.7 IN. X 17.7 IN. X 8.3 IN. : 127 OZ. STROKE: IN./40 MM SHIPPING WEIGHT: 185 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI VH IN./12 MM 90 VH IN./14 MM 90 VH IN./16 MM 90 SH SERIES MAX. INLET : 100 PSI MAX. FLUID TEMPERATURE: 86 F INLET PORT THREAD: 1 1/2 IN. BSP-F DISCHARGE PORT THREAD: 3/4 IN. BSP-F SHAFT DIAMETER: IN./50 MM PUMP DIMENSIONS: 42.4 IN. X 25.8 IN. X 13.7 IN. : 467 OZ. STROKE: IN./90 MM SHIPPING WEIGHT: 840 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI SH IN./20 MM 90 SH IN./20 MM 90 SH IN./22 MM 90 SH IN./22 MM 90 SH IN./24 MM 90 SH IN./24 MM 90 SH IN./26 MM 90 SH IN./26 MM 90 SH IN./28 MM 90 SH IN./28 MM 90 LH SERIES MAX. INLET : 45 PSI MAX. FLUID TEMPERATURE: 140 F INLET PORT THREAD: 90 MM BSP-F DISCHARGE PORT THREAD: 1 1/4 IN. BSP-F SHAFT DIAMETER: IN./50 MM PUMP DIMENSIONS: 36.3 IN. X 25.8 IN. X 13.5 IN. : 467 OZ. STROKE: IN./90 MM SHIPPING WEIGHT: 800 LBS. MODEL NO. -GPM -PSI BORE MIN. INLET-PSI LH IN./40 MM 5.1 LH IN./40 MM 5.1 LH IN./45 MM 5.4 LH IN./45 MM 5.4 LH IN./50 MM 5.5 LH IN./50 MM 5.5 LH IN./55 MM 5.8 LH IN./55 MM 5.8 LH IN./60 MM 6.1 LH IN./60 MM 6.1

24 TECHNICAL DATA Note: the components listed herein may differ from the pictures shown

25 Pressure pumping & washing equipment ELECTRIC DRIVEN, COLD WATER WASHING & PUMPING SYSTEMS Available Specifications: 1000 psig to 7250 psig / 2 gpm to 200 gpm ELECTRICALLY HEATED, HOT WATER WASHING SYSTEMS Available Specifications: 1000 psig to 5000 psig / 2 gpm to 16 gpm EXPLOSION-PROOF, HOT & COLD WATER WASHING SYSTEMS Class I,II, Division 1, Groups C, D, F & G Available Specifications: Cold Water-1000 psig to 7250 psig / 2.2 gpm to 65 gpm Hot Water-1000 psig to 5000 psig / 2 gpm to 16 gpm VFOS (VARIABLE FREQUENCY OPERATING SYSTEM), MULTI-STAGE, AND TANK-FED WASHING & PUMPING SYSTEMS Available Specifications: 1000 psig to 5000 psig / 8 gpm to 100+ gpm NATURAL GAS & PROPANE FIRED HOT WATER WASHING SYSTEMS Available Specifications: G30/P30 Series-1000 psig to 3000 psig / 4 gpm to 6 gpm 300,000 BTUH INPUT (2)G40/(2)P40 Series-1000 psig to 3000 psig / 4 gpm to 16 gpm 395,000 & 790,000 BTUH INPUT ENGINEERED PUMPING & WASHING SYSTEMS Available Specifications: Designed/built to application requirements ASME B31.1, 2004 & N285.0 Class 6 code compliant designs Certified safety, limit and performance testing and validation MTC (material traceability certificate) Level II 3300 Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com COPYRIGHT 2012 PSC CLEANING SYSTEMS INC., ALL RIGHTS RESERVED