INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment

Transcription

1 INFG-2R 10/10 Gemini & Infinity Finishing Pumps & Equipment

2 Pump Basics for Smooth Operation Fluid Characteristics Influence Pump Selection Consider the following fluid characteristics when choosing your finishing pump. Matching pumps to the fluids they will deliver will improve pump performance. Diaphragm vs. Piston Pumps Diaphragm pumps are used for fluids with They should not be used with halogenated hydrocarbons specific fluids. pumps offer protection from corrosion with option for lower production requirement Note: Always consult your Binks finishing pump professional when choosing your finishing pumps. In addition, refer to chemical compatibility charts to address durability and compatibility issues. Technical Terms Continuous Duty Cycle Rate completes a pump cycle in a given period of time. Flow Rate pumped in a given period of time. fluid pressure a pump can achieve at stall, no flow. Pump Cycle air motor piston. Pump Ratio or hydraulic motor piston effective area and the lower displacement pump s piston effective area. Viscosity Maximizing Pump Performance Keep in mind that the pump must move material from its source through a variety of conditions to the spray gun. Be sure to discuss the following conditions with Pump Families Infinity Diaphragm Pump Packages sensitive materials low pressure, high volume coatings transfer applications and reduce pulsation Infinity N Series Infinity Pogo Plus Pump Infinity Two-Ball w/ UltraCoat and caustic outperforms hard chrome 2 Infinity Four-Ball w/ultracoat operations water supply, and surface coating outperforms hard chrome

3 Binks Gemini & Infinity Pumps Selection Guide PUMP BINKS BRAND UNIQUE TYPICAL TYPICAL TECHNOLOGY INFINITY/GEMINI BENEFIT FLUIDS APPLICATIONS Gemini Diaphragm Pump (Low Pulse) (Max. Flow) 0 to 100 PSI pgs /2" 1:1 SS /2" 1:1 Grnd Act /2" 1:1 SS /2" 1:1 Act /2" 1:1 Alum Economical Pump High flow capacity Paints, inks, solvents, dyes, stains and coatings Low viscosity fluids Paint and coating circulating systems Circulation of low viscosity inks, stains and dyes Low viscosity adhesive supply Drum transfer Low pressure air spray or HVLP supply pump Gemini High Volume Diaphragm Pump 0 to 300 PSI pgs /2" 1:1 SS " 1:1 Alum " 1:1 SS " 3:1 SS High pressure for a diaphragm pump Low sheer output Quick color change Paints, stains, resins, latexes, wood preservative stains, primers, adhesives, varnishes, dispersions, solvents, stains, shear-sensitive fluids, boothside, special color paints Wood coating circulating systems Paint circulating systems Drum fluid transfer Unloading fluids Infinity Two-Ball Piston Pump 0 to 6000 PSI pgs : : : : : : :1 Wide performance range capability Low to high pressure capability Uniform and easily controlled delivery Solventborne fluids, waterborne fluids, high solid coatings, lacquers, enamels, urethanes Infinity Four-Ball Piston Pump 0 to 700 PSI pgs : :1 Low cycle rate operation Low shear operation Varnishes, stains, enamels and lacquers, cleaning fluids, adhesives, sealants, waterborne and solventbornes for paint and circulating systems Automotive paint circulation High volume paint and coating transfer Fluid transfer and supply Chemical cleaning supply pump Infinity N Series Piston Pump 0 to 400 PSI pg :1 Air powered for high reliability Available in SS drum pump Epoxies, enamels and stains, polyurethanes, solventborne and waterborne coatings Furniture and wood, aerospace, truck and bus, farm, fleet, general metals Infinity Pogo Plus 0 to 200 PSI Piston Pump pg :1 SS Drum :1 SS Drum :1 SS Stub :1 SS Stub Air powered for reliability Delivery up to 2.15 GPM Available in SS Stub or drum Light viscosity coatings and fluids, thinners and solvents, spray adhesives, general chemicals Fluid transfer from drum to tank Low viscosity spray adhesive supply Supply pump for spray applications of coatings and wood finishing materials SS Stainless Steel, CS Carbon Steel

4 Gemini 1/2 Diaphragm Pumps Max. Flow Pump # (SS), # (Acetal), Low Pulse # (Acetal), # (SS), # (Alum) 1/2" NPT (F) Fluid Outlet 1/4" NPT (F) Air Inlet 1/2" NPT (F) Fluid Inlet 7-11/16" (195 mm) 6-1/8" (156 mm) 11" (279 mm) 2" (51 mm) 11-5/8" (295 mm) 6-7/16" (164 mm) 4-7/8" (124 mm) 5/16" (8 mm) Slot Width 5-1/2" (140 mm) NOTE: Stainless Steel Pump Shown. Groundable Acetal and Polypropylene have 4 inlets and 4 outlets Gemini Bare Pumps 1/2", Low Pulse 6" (152 mm) Torque in. lbs. GPM GPM GPM WETTED MATERIAL MODEL SIZE RATIO MAX. CONSTRUCTION CYCLE CPM CPM BODY SEATS BALLS DIAPHRAGMS /2" 1: Acetal SS SS Teflon /2" 1: SS SS SS Teflon /2" 1: Alum SS SS Teflon Gemini Bare Pumps 1/2", Max. Flow GPM GPM GPM WETTED MATERIAL MODEL SIZE RATIO MAX. CONSTRUCTION CYCLE CPM CPM BODY SEATS BALLS DIAPHRAGMS /2" 1: SS SS SS Teflon /2" 1: Acetal SS SS Teflon Wall Mount Bracket Siphon ft. hose w/fluid filter (5 gal) Performance 100 PSI Air Inlet Pressure PSI (1-6.9 bar) Fluid Pressure PSI (1-6.9 bar) Max. Flow Rate (Flooded Inlet) Standard Stroke SS and Polypropylene GPM (49.2 lpm) Short Stroke Groundable Acetal GPM (26.5 lpm) Max. Particle Size /32" Dia (2.4 lpm) Max. Temperature Limits Stainless Steel F (93 C) Groundable Acetal F (82 C) Polypropylene F (66 C) 60 Cycles/Min. Standard Stroke Gal (9 liters) Short Stroke Gal (5 liters) Cycles Per Gallon (Liter) Standard Stroke (6.6) Short Stroke (512) Displacement Per Cycle - Standard Stroke 9.24 cu. in (151.4 cm 3 ) 5.12 oz (151.4 ml).040 gal (.15 liter) Short Stroke 5.08 cu. in (83.3 cm 3 ) 2.8 oz (83.3 ml).022 gal ( Cycles/Min db(a) Part Numbers Air Motor Repair Kit Diaphragm Repair Kit Stainless Steel Groundable Acetal Ball and Seat Repair Kit Stainless Steel (Ball/Seat) Teflon (Ball) SS (Seat)

5 Gemini 1/2 Diaphragm Pump Packages For Wood and Office Furniture, Commercial Equipment, Metal Fabrication, Metal Maintenance and Cabinet Shops Gemini Pump Packages 1/2", Low Pulse 100 PSI PACKAGE BARE PUMP WETTED RATIO & MOUNTING AIR SUCTION HOSE AGITATOR PRIME PULSE/ FLUID NUMBER NUMBER PARTS SIZE 60 CPM REGLTRS. W/BUNG ADAPT. VALVE FILTER REG acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail acetal, Teflon 1:1, 1/2 NPT 1.2 wall 2 55 gallon acetal, Teflon 1:1, 1/2 NPT drum cover 2 55 gallon Gemini Pump Packages 1/2", Max. Flow 100 PSI PACKAGE BARE PUMP WETTED RATIO AND MOUNTING AIR SUCTION HOSE AGITATOR PRIME PULSE/ FLUID NUMBER NUMBER PARTS SIZE 60 CPM REGLTRS. W/BUNG ADAPT. VALVE FILTER REG SS, Teflon 1:1, 1/2 NPT 2.4 wall acetal, Teflon 1:1, 1/2 NPT bung 1 NR Not Recommended Not Shown Gemini 1/2" Low Pulse Spray Outfit 1 2 MODEL # SYSTEM COMPONENT LIST Item Part Description Qty. Part No. No. Sheet Mach 1 SL Gun Fluid Hose Ass y Air hose Ass y Gemini Pump Pkg X GENERAL DESCRIPTION This 55 gallon, wall mounted system comes complete with Mach 1 SL Gun w/94 x 94P set-up, 1:1 Gemini 1/2" Low Pulse diaphragm pump, air control, 25' air and fluid hose and 55 gallon siphon kit.

6 Gemini 1" Diaphragm 1:1 Pumps Pump # (Alum), # (SS) 12-1/2" (318 mm) 8" (203 mm) 6-1/4" C/L (159) 7-5/16" (186) 1" Wall Mount Package Torque in. lbs. Package Includes 11-9/16" (294 mm) 13/32" slot (10 mm) Gemini Bare Pumps 1", 1:1 100 PSI 8-1/2" (216 mm) 4" (102 mm) Fluid Outlet 1/4" NPT (F) Air Inlet MODEL SIZE RATIO GPM PER GPM MAX. WETTED MATERIAL CONSTRUCTION CYCLE CPM CPM BODY SEATS BALLS DIAPHRAGMS " 1: Alum SS SS Teflon " 1: SS SS SS Teflon Performance 100 PSI Air Inlet Pressure PSI ( bar) Fluid Pressure PSI ( bar) Max. Flow Rate (Flooded Inlet) GPM (133 lpm) Max. Particle Size /8 Dia (3.2 mm) Max. Temperature Limits F (93 C) 60 Cycles/Min GPM (36 liters) Displacement Per Cycle cu. in ( cm 3 ) 20.5 oz ( ml).16 gal (.60 liter) Cycles Per Gallon (Liter) Cycles/Min db(a) Repair Kit Part Numbers Air Motor Repair Kit Diaphragm Repair Kit Ball and Seat Repair Kit Stainless Steel (Ball/Seat) Teflon (Ball) SS (Seat) Wall Mount Bracket Siphon Kit ' Hose with Stainer 5 Gallon Gallon Siphon Kits Include: 5' hose, SS fittings, tube and strainer Gemini Pump Packages 1", 1:1 100 PSI PACKAGE BARE PUMP WETTED RATIO AND MOUNTING AIR SUCTION HOSE AGITATOR PRIME PULSE/ FLUID NUMBER NUMBER PARTS SIZE 60 CPM REGLTRS. W/BUNG ADAPT. VALVE FILTER REG Alum, Teflon 1:1, 1 NPT 9.6 wall SS, Teflon 1:1, 1 NPT 9.6 wall

7 Gemini 1" Hi-Volume 3:1 Pump Pump # (SS) Ratio 2.65:1 Diaphragm Pump 3/8" NPT (F) Air Inlet 12-1/2" (318 mm) 16" (406 mm) 11-7/8" (302 mm) Wall Mount Bulk Transfer Fluid Outlet 7-1/2" (191 mm) Fluid Inlet This Side Gemini Bare Pump 1", 3:1 300 PSI 13-9/16" (344 mm) 8-1/2" (216 mm) 8" (203 mm) 6-1/2" (165mm) Torque in lb. pumps can efficiently transfer finishing can supply large circulating systems. Both pumps are designed to handle Lubrication required for 24 hours a day and 7 days a week, Operation only. MODEL # :1 DIAPHRAGM INCLUDES: Pump Wall Bracket Air Control Vented Shut Off GPM GPM GPM WETTED MATERIAL MODEL SIZE RATIO MAX. CONSTRUCTION CYCLE CPM CPM BODY SEATS BALLS DIAPHRAGMS " 3: SS SS SS Teflon Performance 300 PSI Air Inlet Pressure PSI ( bar) Fluid Pressure PSI ( bar) Inlet/Outlet NPT Max. Flow Rate (Flooded Inlet) GPM Max. Particle Size /8" Dia (3.2 mm) Max. Temperature Limits F (93 ) 60 Cycles/Min Gal.(20.4 liters) Displacement Per Cycle cu. in (340.7 cm 3 ) oz (340.7 ml).09 gal (.34 liter) Cycles Per Gallon (Liter) Cycles/Min db(a) Specifications Air Motor Unbalanced Wetted Pump Material Stainless Steel Diaphragm Material Teflon Seat Stainless Steel Balls (standard) Stainless Steel Weight: lbs (43 kgs) Repair Kit Part Numbers Air Motor Repair Kit Diaphragm Repair Kit Ball and Seat Repair Kit Stainless Steel (Ball/Seat) Wall Mount Bracket Gemini Pump Packages 1", 3:1 300 PSI PACKAGE NUMBER BARE PUMP WETTED NUMBER PARTS RATIO AND SIZE 60 CPM MOUNTING AIR REGLTRS SS, Teflon 3:1, 1 NPT 5.4 wall

8 Gemini 1 1/2" Hi-Volume 1:1 Pump Pump # (SS) 1 1/2" Diaphragm 19-5/8" (498 mm) 1/2" Slot (13 mm) 11-1/2" (292 mm) 9" (229 mm) Torque in lb. 1 1/2" NPT (F) Fluid Inlet Wall Mount Bulk Transfer 18-3/8" (467 mm) 2-3/4" (70) Gemini Bare Pump 1 1/2", 1:1 100 PSI 13-1/8" (333 mm) 10-9/16" (268 mm) 11-7/8" (302 mm) 1-1/2" NPT (F) Fluid Outlet 15-5/8" (397 mm) 1/2" NPT (F) Air Inlet finishing pumps can efficiently transfer MODEL # /2" PUMP INCLUDES: Pump Wall Bracket Air Control Vented Shut Off GPM GPM GPM MODEL SIZE RATIO MAX. WETTED MATERIAL CONSTRUCTION CYCLE CPM CPM BODY SEATS BALLS DIAPHRAGMS /2" 1: SS SS SS Teflon Performance 100 PSI Air Inlet Pressure PSI (1-8.3 bar) Fluid Pressure PSI (1-8.3 bar) Max. Flow Rate (Flooded Inlet) GPM (340.2 lpm) Max. Particle Size /4 Dia (6.4 mm) Max. Temperature Limits F (66 C) 60 Cycles/Min Gal.(165.6 liters) Displacement Per Cycle cu. in (2420 cm 3 ) 82 oz (2420 ml).64 gal (2.42 liters) Cycles Per Gallon (Liter) Cycles/Min db(a) Specifications Air Motor Unbalanced Wetted Pump Material Stainless Steel Diaphragm Material Teflon Seat Stainless Steel Balls Stainless Steel Weight lbs (38.1 kgs) Repair Kit Part Numbers Air Motor Repair Kit Diaphragm Repair Kit Ball and Seat Repair Kit SS (Ball) SS (Seat) Teflon (Ball) SS (Seat) Wall Mount Bracket

9 Infinity N Series Pumps 4:1 Ratio # Stainless Steel 300 Series (Drum) Model /4" NPT (F) Air Inlet Material Outlet 3/4" N.P.T.F. Material Inlet 1-1/4" N.P.S.M. (f) Model Number A (mm) B (mm) /32" (1312.1) 33-1/4" (844.6) B A Specifications Model Series (refer to option chart) X Type Air Operated, Two Ball Air Motor Motor Repair Kit Motor Diameter " (7.62 cm) Stroke (Double Acting) " (7.62 cm) Air Inlet /4-18 N.P.T.F. - 1 (female) Lower Pump End Repair Kit (Leat., Tef) Models Lower Pump Repair Kit (Leat., Tef) Material Inlet All Models except /2 N.P.T.F. - 1 (female) Wall Mount Bracket (Stub Pump) Fluid Filter Wall/Drum Mount Bracket for Drum Pumps Wet Sol Packing Lubricant Performance 400 PSI Air Inlet Pressure Range PSI ( bar) Fluid Pressure Range PSI ( bar) Max. Rec d Cycles/Min Displacement Per Cycle cu. in. Volume/Cycle oz. (180.2 ml) Cycles Per Gallon Cycles/Min GPM ( l.p.m.) Noise 100 PSI db(a) Materials of Construction Lower Pump Material Stainless Steel Plunger Material Stainless Steel Cylinder Material Stainless Steel Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight (Drum) lbs. (20.7 kgs.) 9

10 Infinity Pogo Plus Pump Pump #812490, # (Drum (SS)), #812500, # (Stub (SS)), Ratio 2:1 200 PSI SS = Stainless Steel, CS = Carbon Steel A B Dimensional Data 2" Motor 3" Stroke 1/4" NPT (M) Air Inlet 3/8" NPS Material Outlet MODEL A (mm) B (mm) Weight (kg) 81249X 47-3/4" (1211.8) 33-11/16" (855.6) 22.5 (10.2) 81250X 33-7/8" (859.9) 19-7/8" (503.7) 17.2 (7.8) Capacity: 55 Gal. 5 Gal. *All Pogo Pumps come complete and ready to use. Performance 200 PSI Air Inlet Pressure PSI ( bar) Fluid Pressure Range PSI ( bar) Max. Cycles/Min Displacement Per Cycle cu. in. Volume Per Cycle oz. (135.6 ml) Cycles Per Gallon (Liter) Cycles/Min GPM (8.14 lpm) Materials of Construction 81249X and 81245X (SS) Noise 100 PSI db(a) Lower Pump Material Stainless Steel Plunger Material Series SS Cylinder Material Stainless Steel , Packing Set... UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) , Packing Set Teflon Weight Drum lbs. (10.2 kgs.) Stub lbs. (7.8 kgs.) Part Numbers for 81249X and 81245X (SS) Air Motor Air Motor Repair Kit Lower Pump Assembly (End Series) Lower Pump Repair Kit UHMW Lower Pump Repair Kit PTFE Materials of Construction 81247X and 81248X (CS) Lower Pump Material Carbon Steel Plunger Material... Carbon Steel (Chrome Plated) Cylinder Material Carbon Steel , Packing Set... UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) , Packing Set Teflon Weight Drum lbs. (8.9 kgs.) Stub lbs. (7.9 kgs.) Air Control Wall Mount or Open Drum Mount Bracket Pogo Plus Spray Finishing Outfit Model # General Description FLUID PRESSURE P.S.I. (BAR) CYCLES PER MINUTE (17.2) 20 (10) Performance based on 30 wt. oil at ambient temperature 120 (8.3) 120 (8.3) 200 (13.8) 90 (6.2) 90 (6.2) 150 (10.3) 60 (4.1) 100 (6.9) 60 (4.1) 50 (3.4) 8 (4) 4 (2) (7.6) 4 (15.1) 6 (22.7) 8 (30.3) 10 (37.9) U.S. GALLONS PER MINUTE DELIVERY (LITERS) 16 (8) 12 (6) AIR CONSUMPTION S.C.F.M. (LITERS/SEC.) ft. fluid hose ass y 2001 SS spray gun Air control ass y Main air IN 1/4" NPS(m) ft. air hose ass y Needle valve Pogo pump 10

11 Infinity 11:1 Two-Ball Pump Pump # Ratio 11: PSI Performance 1100 PSI Part Numbers 39-3/4" (1009 mm) 1/2" NPT (F) Air Inlet 1-1/4" NPT Muffler Exhaust 4-1/4" Motor 6" Stroke Air Inlet Pressure PSI ( bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Cycle 14.5 cu. in (238 cm 3 ) 8 oz (238 ml).06 gal (.23 liter) Cycles Per Gallon (Liter) (4.2) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (19.5 kgs.) Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Repair Kit (UHMW) Optional Lower Pump Repair Kit Teflon/Leather (Upper and Lower) Wall Mount Bracket Cart Muffler Fluid Filter Wet Sol Packing Lubricant Siphon Kits 5 gallon gallon Siphon Kits Include: 5' hose, SS fittings, tube and strainer Wall Mount 11:1 Package. Includes: muffler, air filter/regulator, outlet filter, relief valve, shutoff valve and needle valve Fluid Outlet 18-15/16" (481 mm) 12-11/16" (322 mm) 2" NPT (M) Fluid Inlet 11

12 Infinity 22:1 Two-Ball Pump Pump # Ratio 22: PSI Performance 2200 PSI Part Numbers 39-3/4" (1009 mm) 1/2" NPT (F) Air Inlet 1-1/4" NPT Muffler Exhaust 4-1/4" Motor 6" Stroke Air Inlet Pressure PSI ( bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Cycle 7.5 cu. in (122.9 cm 3 ) 4.1 oz (122.9 ml).03 gal (.12 liter) Cycles Per Gallon (Liter) (8.1) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (19.5 kgs.) Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Kit (UHMW) Optional Lower Pump Repair Kit Teflon/Leather (Upper and Lower) Wall Mount Bracket Cart Muffler Fluid Filter Wet Sol Packing Lubricant Siphon Kits 5 gallon gallon Siphon Kits Include: 5' hose, SS fittings, tube and strainer 22:1 Wall Mount Package. Includes: muffler, air filter/regulator, outlet filter, reload valve, shutoff valve and needle valve Fluid Outlet 18-15/16" (481 mm) 12-11/16" (322 mm) 2" NPT (M) Fluid Inlet 12

13 Infinity 23:1 Two-Ball Pump Pump # Ratio 23: PSI Performance 2300 PSI Part Numbers 1/2" NPT (F) Air Inlet 39-3/4" (1009 mm) 1-1/4" NPT (F) Muffler Exhaust 6" Motor 6" Stroke Fluid Outlet Air Inlet Pressure PSI ( bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Cycle 14.5 cu. in (238 cm 3 ) 8 oz (238 ml).06 gal (.23 liter) Cycles Per Gallon (Liter) (4.2) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (21 kgs.) Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Repair Kit (UHMW) Optional Lower Pump Repair Kit Teflon/Leather (Upper and Lower) Wall Mount Cart Muffler Fluid filter Wet Sol Packing Lubricant Siphon Kits 5 gallon gallon Siphon Kits Include: 5' hose, SS fittings, tube and strainer Wall Mount Outfit. Includes: muffler, air filter/regulator, outlet filter, relief valve, shutoff valve and needle valve Cart Mount Outfit. Includes: muffler, air filter/regulator, outlet filter, relief valve, shutoff valve and needle valve /16" (481 mm) 12-11/16" (322 mm) 2" NPT (M) Fluid Inlet

14 Infinity 23:1 Two-Ball Pump Pump # Ratio 23:1 15 GPM 2300 PSI 45" (1143 mm) 1-1/4" NPT (F) Muffler Exhaust 12" Motor 6" Stroke Performance 2300 PSI Air Inlet Pressure PSI ( bar) Max. Fluid Pressure PSI ( bar) Max. Max. Cycles/Min Displacement Per Cycle (981.5 cm 3 ) Cycles Per Gallon(Liter) (1.01) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, ChromePlated Cylinder Material Stnls. Steel, ChromePlated Material Inlet " NPT (M) Material Outlet /4" NPT (F) Weight lbs. (63.6 kgs.) Part Numbers Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Repair Kit, UHMW Lower Pump Repair Kit, Teflon Wall Mount Bracket Muffler Wet Sol Packing Lubricant /4" NPT (F) Fluid Outlet 25.2" (640.5 mm) 14.6" (370.8 mm) 2" NPT (M) Fluid Inlet

15 Infinity 40:1 Two-Ball Pump Pump # Ratio 40: PSI 3/4" NPT (F) Air Inlet 8" Motor 6" Stroke 1-1/4" NPT (F) Muffler Exhaust 43 9/16" (1106 mm) Performance 4000 PSI Air Inlet Pressure PSI (2-8.1 bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Cycle 14.5 cu. in (238 cm 3 ) 8 oz (238 ml).06 gal (.23 liter) Cycles Per Gallon (Liter) (4.2) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (30.9 kgs.) Part Numbers Air Motor Air Motor Repair Kit Lower Pump Repair Kit (UHMW) Optional Lower Pump Repair Kit Teflon/Leather (Upper and Lower) Wall Mount Bracket Muffler Fluid filter Wet Sol Packing Lubricant Siphon Kits 5 gallon gallon Siphon Kits Include: 5' hose, SS fittings, tube and strainer Fluid Outlet 22-5/8" (575 mm) 12-11/16" (322 mm) 2" NPT (M) Fluid Inlet

16 Infinity 45:1 Two-Ball Pump Pump # Ratio 45: PSI Performance 4500 PSI Part Numbers 1/2" NPT (F) Air Inlet 39-3/4" (1009 mm) 1-1/4" NPT (F) Muffler Exhaust 6" Motor 6" Stroke Air Inlet Pressure PSI (2-8.3 bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Stroke 7.5 cu. in (122.9 cm 3 ) 4.1 oz (122.9 ml).03 gal (.12 liter) Cycles Per Gallon (Liter) (8.1) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (21 kgs.) Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Repair Kit (UHMW) Optional Lower Pump Repair Kit Teflon/Leather (Upper and Lower) Wall Mount Bracket Cart Muffler Fluid filter Wet Sol Packing Lubricant Siphon Kits 5 gallon gallon Siphon Kits Include: 5' hose, SS fittings, tube and strainer Fluid Outlet SPECIAL ORDER PUMP LONG LEAD TIME 18-15/16" (481 mm) 12-11/16" (322 mm) 2" NPT (M) Fluid Inlet

17 Infinity 60:1 Two-Ball Pump Pump # Ratio 60: PSI Performance 6000 PSI Part Numbers 1/2" NPT (F) Air Inlet 39-3/4" (1009 mm) 1-1/4" NPT (F) Muffler Exhaust 6" Motor 6" Stroke Air Inlet Pressure PSI (2-6.9 bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Cycle 5.5 cu. in (90.1 cm 3 ) 3 oz (90.1 ml).024 gal (.09 liter) Cycles Per Gallon (Liter) (11) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (21 kgs.) Air Motor Air Motor Repair Kit Lower Pump Repair Kit (UHMW) Optional Lower Pump Repair Kit Teflon/Leather (Upper and Lower) Wall Mount Bracket Cart Muffler Fluid filter Wet Sol Packing Lubricant Siphon Kits 5 gallon gallon Siphon Kits Include: 5' hose, SS fittings, tube and strainer Fluid Outlet 18-15/16" (481 mm) 12-11/16" (322 mm) 2" NPT (M) Fluid Inlet

18 Infinity 3:1 Four-Ball Pump Pump # Ratio 3:1 300 PSI 1/2" NPT (F) Air Inlet 1-1/4" NPT (F) Muffler Exhaust 6" Motor 6" Stroke Performance 300 PSI Air Inlet Pressure PSI ( bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Cycle cu. in ( cm 3 ) 62 oz ( ml).49 gal (1.8 liters) Cycles Per Gallon(Liter) (.54) 60 Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Part Numbers Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Repair Kit (UHMW) Optional Lower Pump Repair Kit Wall Mount Bracket Muffler Fluid filter Wet Sol Packing Lubricant /16" (1087 mm) Fluid Outlet Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (33.2 kgs.) 22" (558 mm) 19-9/16" (496 mm) 2" P.T.F. SAE SPEC. SHORT (male inlet) 1-1/2" N.P.T.F. (female inlet) 18

19 Infinity 5:1 Four-Ball Pump Pump # Ratio 5:1 500 PSI Air Exhaust 1-1/4 N.P.T.(f) 46-5/8" ( mm) Air Inlet 1/2 N.P.T.(f) Fluid Outlet 1" N.P.T(f) (60 from air exhaust) Performance 500 PSI Air Inlet Pressure PSI ( bar) Fluid Pressure PSI ( bar) Max. Cycles/Min Displacement Per Cycle cu. in. Volume/Cycle oz. (1771 ml) Cycles Per Gallon Cycles/Min GPM ( Cycles/Min db(a) Materials of Construction Lower Pump Material SS Stnls. Steel Plunger Material Stnls. Steel, Cylinder Material Stnls. Steel, Packing Set UHMW Polyethylene Max. 120 F Fluid Inlet Temp. (Standard) Max. 180 F Fluid Inlet Temp. (Optional) Weight lbs. (43.5 kgs.) Part Numbers Air Motor Air Motor Repair Kit Lower Pump End Series Lower Pump Repair Kit Wall Mount Bracket Muffler Fluid filter Wet Sol Packing Lubricant /16" (652.1 mm) 19-9/16" (496.3 mm) 2" P.T.F. SAE SPEC. SHORT (male inlet) 1-1/2" N.P.T.F. (female inlet) 19

20 Infinity Four-Ball Pump Package The All-Stainless Pump Built to Take on the Toughest Applications Ceramic UltraCoat on Cylinder and Rod Package Includes Pump Muffler Accessories (Included) Wall Mount Bracket for 4-1/4" and 6" motors for 8" motors Mufflers for 4-1/4" and 6" air motors for 8" air motors Air Filter/Regulator (2) SS Fluid Filter w/100 mesh element Siphon Kits 5 gallon gallon Siphon kits include 5' hose, SS fittings, tube and strainer Markets Include Commercial Equipment Model I-6, 3:1 Ratio/29.3 GPM 300 PSI Bare Pump # Typical Applications assist systems with light to medium in a circulating or a dead end system. automated systems. 20

21 Pump Support Products Wall Mounts type pumps Diaphragm pumps Portable Carts Air Motor Mufflers Wet Sol Plus material hardening on the piston rod permits easy installation of pump. Can Air Inlet NPT /4 (M) Size, Inches (mm) /2 x 11-3/16 (89 x 284) Air Inlet NPT /4 (M) Size, Inches (mm) /8 x 15-3/8 (143 x 391) 21

22 Air System Components Air Filter/Regulator USED ON MOST PUMPS Air Line Lubricator Oil Capacity oz.(237 ml) Connections /2" NPT(F) Max. Flow SCFM Air Line Lubricant Binks Scrubs Hand Cleaner Towels Filter/Regulator Port Size NPT /2" (F) Reg. Pressure Range PSI (bar) ( bar) Max. Flow SCFM (66 dm 3 /s) Accesories Service Kit, Relieving Type Regulator Wall Mount Kit Filter Element (5 Micron) Pump Protector K6 Case of six buckets 72 towel count per bucket heavy duty hand cleaner towels in a towel for proven performance

23 Fluid Conditioning 16 1/6" 1/2" NPT (F) 4 3/4" 1/2" NPT (F) 7 1/2" Fluid Heaters & Accessories maintaining a temperature of Fluid Heater watts Wetted Stainless Steel Max Working PSI (340 bars) Voltage (16.6 AMPS) Fluid Heater watts Wetted Stainless Steel Max Working PSI (340 bars) Voltage (8.33 AMPS) Fluid Heater watts Wetted Stainless Steel Max Working PSI (340 bars) Voltage (4.5 AMPS) (Includes mounting bracket all models) 3 3/4" Materials Filters, Screens & Inlet Fluid Filters PORT PORT MICRONS WORKING PART NUMBER DESCRIPTION INLET OUTLET MESH (INCH) MATERIAL PSI Materials Filters Standard Models Material Filter 1/2" NPTF (2 inlets) 1/2" PTF SAE SPEC 70 carbon steel Material Filter 1/2" NPTF (2 inlets) 1/2" PTF SAE SPEC 100 carbon steel Material Filter 1/2" NPTF (2 inlets) 1/2" PTF SAE SPEC 70 stainless High Pressure Fluid filter 1/2" NPT 1/2" NPT (.004) stainless Filter/Pulse Assembly 3/8" NPT (F) 3/8" NPT (F) 40 nylon and ss High pressure filter 3/8" NPS (F) 1/4" NPS (M) (.012) stainless 4000 Outlet Adapter to mount For mounting material filter 1" NPT (M) 1/2" NPT (M) 30x (.023) Replacement Elements Replacement Fluid filter for , (.008) stainless Replacement Fluid filter for , (.004) stainless Replacement Fluid filter for stainless Replacement Fluid filter for (.004) stainless Gun Mounted Material Filter Screens VS-534 Filter Assembly 3/8" NPS (F) SW 3/8" NPS (M) (.004) stainless 300 PLH-MF Final Filter 3/8" NPS (M) 3/8" NPS (F) (.004) stainless 250 Inlet Fluid filter On Inlet Of Pickup Tube For siphon hose /2" NPT (F) (.021) stainless For siphon hose and /4" NPT (F) (.021) stainless Standard filter element , optional SS 80 mesh filter element , standard EPDM gasket , optional Viton gasket (100 Mesh) , , , (100 Mesh) (70 Mesh) (100 Mesh)

24 Sales and Service Through a Nationwide Network of Industrial Distributors North American Office