Atomization air regulator. Air regulator Fluid pressure

Size: px
Start display at page:

Download "Atomization air regulator. Air regulator Fluid pressure"

Transcription

1 02.75 pump The piston pump is designed for use with a single or multiple gun systems spraying medium viscosity coatings. It can also be used on a heated circulation system. Compact design Rugged - High sealing capacity with single lip seal Available in stainless steel version Easily integrated into a finish workshop Compatible with a wide range of materials Compatible with water-based materials Pressure ratio 1.8:1 Fluid volume per cycle 2.87 fl oz (85 cm 3) ) Number of cycles per 33.8 oz (1 liter) of product 12 Air consumption at 30 cycles/mn at 58 psi (4 bar) 1.2 cfm (2.1 m 3 /h).7 gal/mn (2.6 L/mn) 1.3 gal/mn (5.1 L/mn) 145 psi (10 bar) 140 F (60 C) 81 dba Sealing packings Upper sealing GT cartridge with polyethylene packing Lower sealing Acetal resin seal Weight - bare pump 11 lbs. (5 kg) Aluminum, stainless steel 16.1 in (41 cm) Width - 2 s 11 in (28 cm) 6.7 in (17 cm) fittings Air inlet (valve) F 3/8" Air outlet (atomization air) M 1/4" NPS Fluid inlet M 18x125 M 3/8" NPS CONFIGURATION OF THE PUMP Set-up Additional Atomization air Air Fluid Suction rod Drain rod Pump output filter Standard, bare Bare, stainless steel Wall-mounted, stainless steel with 2 air and 1 fluid l l l l part number Pump, 02-75, s/s, w/m, c/w pump air reg, 5 gallon rod Pump, 02-75, s/s, w/m, c/w pump air reg, bottle, 5 gallon rod Pump, 02-75, s/s, w/m, c/w pump reg, w/o suction System, 02-75, w/m, c/w,3 regs, M22 12E3, 5 gallon rod

2 02.75 pump Fittings and air treatment Airmix Plural component pumps and machines Electrostatic spraying and equipment Airspray spraying technologies SEAL KITS Seal kit for 75 fluid section Repair kit for 75 fluid section Seal kit for air motor Fitting for electrostatic installation (K3 and Spraymium) Adaptors F 38"NPS/M #5 JIC Carts and suction rods Single post cart Suction rod 18 x 125 fitting - plunger tube length 600 mm AIRLESS

3 PMP-150 pump The PMP-150 diaphragm pump is designed for fluid applications requiring a 1:1 ratio and can be used on some adhesive applications and harsh or high solids, high viscosity coatings. Simple design Double diaphragm constructed from PTFE and nitrile Easy operation and maintenance Compatible with most of solvent or water-based products. Quick motor inversion Pressure ratio 1:1 Fluid volume per cycle 3.38 fl oz (100 cm 3 ) Number of cycles per 33.8 oz (1 liter) of product 10 Air consumption at 30 cycles/mn at 58 psi (4 bar) 0.65 cfm (1.1 m 3 /h).79 gal/mn (3 L/mn) 5 gal/mn (19 L/mn) 122 F (50 C) <70 dba Weight - bare pump 11.2 lbs. (5 kg) PTFE, Polypropylene, Stainless steel - wall-mounted 9.4 in (24 cm) Width - wall-mounted pump 14.1 in (36 cm) - wall-mounted pump 10.2 in (26 cm) Air inlet (valve) F 3/8" Air outlet (atomization air) M 1/4" NPS Fluid inlet M 18 x 125 M 3/8" NPS CONFIGURATION OF THE PMP 150 PUMP Set-up Air motor power Atomization air Air Fluid Suction rod Drain rod Pump output filter Bare pump Wall mounted l l l Wall mounted - l l l Wall mounted l l l l Wall-mounted with stainless steel circulation - l l l Options Can be fitted on Fluid air Wall-mounted and mobile pumps Stainless steel circulation kit (to be included: wall bracket ref: ) Wall-mounted and mobile pumps Motor air supply kit Bare pump SEAL KITS PMP motor seal kit Fluid section seal kit (PTFE) Fluid section seal kit (EPDM) Fluid section seal kit (FPM)

4 PMP-150 pump Fitting for electrostatic installation (K3 and Spraymium) Adaptor F 38" NPS/M #5 JIC Carts, cups and suction rods 0.5 gal (2 L) gravity cup kit with bracket Tripod for PMP gal (2 L) gravity cup kit without bracket Single post cart Complete wall mounting bracket Suction rod 18 x 125 fitting - plunger tube length 23.6 in (600 mm) part number System, PMP-150, wall mount, c/w 3 regs, M22 12E3, 5 gallon rod System, PMP-150, wall mount, c/w 3 regs, M22 12E3, 55 gallon rod System, PMP-150, wall mount, 3 regs, glue gun kit, 5 gallon rod, M22 15EN PMP-150, wall mount, c/w pump air, 5 gallon rod PMP-150, wall mount, c/w pump air, 55 gallon rod PMP-150, wall mount, c/w pump air reg, circulation kit, 5 gallon rod PMP-150, p/m, c/w 3 regs agitator System, PMP-150, p/m, c/w 3 regs M22 12E3, agitator PMP-150, c/w muffler, mounting bracket Airmix Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment Airspray spraying technologies AIRLESS

5 PMP-150 transfer pump The PMP-150 diaphragm pump is designed for fluid transfer applications. Airspray spraying technologies Double material diaphragm constructed from PTFE and nitrile Simple design Pressure ratio 1:1 Fluid volume per cycle 3.38 fl oz (100 cm 3 ) Number of cycles per 33.8 oz (1 liter) of product 10 Air consumption at 30 cycles/mn at 58 psi (4 bar) Weight - bare pump 7.4 Width Air inlet (valve) F 3/8" Fluid inlet Compatible with most of solvent or water-based products. Quick motor inversion Easy operation and maintenance.65 cfm (1.1 m 3 /h).79 gal/mn (3 L/mn) 5 gal/mn (19 L/mn) 122 F (50 C) <70 dba PTFE, Polypropylene, Stainless steel 8.6 in (22 cm) 7.8 in (20 cm) 5.9 in (15 cm) F 3/4" NPS F 3/8" BSP Airmix Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment AIRLESS CONFIGURATION OF THE PMP 150 PUMP Option Set-up Air motor power Air Fluid Fluid Suction rod Drain rod Pump output filter Bare transfer PMP 150 pump l Motor air supply kit SEAL KITS PMP motor seal kit Fluid section seal kit (PTFE)

6 PMP-150E PUMP The PMP-150E diaphragm pump is a packing free pump designed with special balls and seats to pump abrasive water-based coatings such as porcelain enamel. Simple and rugged design Compact design Charged polypropylene diaphragm and polyurethane balls Compatible with a wide range of materials Long lasting performance Compatible with water-based and enamels Pressure ratio 1:1 Fluid volume per cycle 3.38 fl oz (100 cm 3 ) Number of cycles per 33.8 oz (1 liter) of product 10 Air consumption at 30 cycles/mn at 58 psi (4 bar).65 cfm (1.1 m 3 /h).79 gal/mn (3 L/mn) 5 gal/mn (19 L/mn) 122 F (50 C) <70 dba Weight - bare pump 11 lbs (5 kg) Diaphragm material Polyurethane Polypropylene, PTFE, Polyurethane 8.6 in (22 cm) Width 7.8 in (20 cm) 5.9 in (15 cm) Air inlet F 3/8" Fluid inlet F 3/8" BSP F 3/8" BSP CONFIGURATION OF THE PMP 150E PUMP Set-up Suction rod Drain rod Atomization air Air Fluid Pump output filter Bare Options Motor air supply kit SEAL PACKS PMP motor seal kit Fluid section seal kit (PTFE) Carts, cups and suction rods Tripod for PMP liter gravity cup kit with bracket liter gravity cup kit without bracket Single post cart Complete wall mounting bracket

7 PMP-150 transfer pump The PMP-150 diaphragm pump is designed for fluid transfer applications. Airspray spraying technologies Double material diaphragm constructed from PTFE and nitrile Simple design Pressure ratio 1:1 Fluid volume per cycle 3.38 fl oz (100 cm 3 ) Number of cycles per 33.8 oz (1 liter) of product 10 Air consumption at 30 cycles/mn at 58 psi (4 bar) Weight - bare pump 7.4 Width Air inlet (valve) F 3/8" Fluid inlet Compatible with most of solvent or water-based products. Quick motor inversion Easy operation and maintenance.65 cfm (1.1 m 3 /h).79 gal/mn (3 L/mn) 5 gal/mn (19 L/mn) 122 F (50 C) <70 dba PTFE, Polypropylene, Stainless steel 8.6 in (22 cm) 7.8 in (20 cm) 5.9 in (15 cm) F 3/4" NPS F 3/8" BSP Airmix Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment AIRLESS CONFIGURATION OF THE PMP 150 PUMP Option Set-up Air motor power Air Fluid Fluid Suction rod Drain rod Pump output filter Bare transfer PMP 150 pump l Motor air supply kit SEAL KITS PMP motor seal kit Fluid section seal kit (PTFE)

8 Pump For medium viscosity products with 1 or more guns. For circulating and automatic machines. Airspray circulating Airspray spraying technologies Stainless steel construction Compatible with water-based materials Large fluid section Reduces the amount of shearing on the coating Durable construction Provides dependability and performance Pressure ratio 4:1 Fluid volume per cycle 8.11 fl oz (240 cm 3 ) Number of cycles per 33.8 oz (1 liter) of product gal/mn (7.2 L/mn) Air 30 CPM at 72 psi (5 bar) 6.1 cfm (10.3 m 3 /h) 3.8 gal/mn (14.4 L/mn) 348 psi (24 bar) 140 F (60 C) 80 dba Sealing packings Upper sealing PTFE G + Polyfluid Lower sealing HDPE Weight - wall-mounted 59.5 lbs. (27 kg) Stainless steel 32.6 in (83 cm) Width 15.8 in (40 cm) 8.3 in (21 cm) Airmix AIRLESS Air inlet Fluid inlet Configuration of the pump Set-up Suction rod Drain rod F 3/4 BSP M 26x125 #5 JIC Atomization air Air Fluid Pump output filter Bare Wall-mounted l Wall-mounted l l - l l Cart-mounted l l - l l Electrostatic spraying and equipment part number Pump, w/m, c/w pump air reg,filter, 5 gal, wb abrasive kt Pump, , w/m, c/w air reg, 55 gal. rod, filter, GT cartridge Pump, , w/m, c/w pump air reg, filter, w/o suction Pump, , w/m, c/w pump air reg, 55 gal. rod, filter Pump, , w/m, c/w pump air reg, 5 gal. rod, w/o filter Pump, , w/m, c/w pump air reg, 55 gal. rod, w/o filter KITS Seal kit H Repair kit H Seal kit for air motor Repair kit for air motor Carts and rods (suction and flushing) Two post cart w/o plate Two post pump mounting plate Easyflow suction rod, 5 gal Easyflow suction rod Ø25 plunging tube length 39.4 in (1000 mm) for 55 gal (200 liters drums) Stainless steel flushing rod F18 x Plural component pumps and machines Fittings and air treatment

9 04.120F FLOWMAX pump Airspray circulating Bellows pump - Flowmax technology - without packings for automatic machines and circulating Sealing done by one large stroke Bellows Ergonomic design of fluid passages Stainless steel construction Balanced fluid section Mobile piston seal High reliability No more lubricant cups Leak free Fluid section isolated from atmosphere Ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Constant fluid output Excellent suction capacity Pressure ratio 4:1 Fluid volume per cycle 8.11 fl oz (240 cm 3 ) Number of cycles per 33.8 oz (1 liter) of product 4 Fluid output at 30 Cycles/mn 1.9 gal/mn (7.2 L/mn) 3.8 gal/mn (14.4 L/mn) Air 30 CPM at 72 psi (5 bar) 6.1 cfm (10.3 m 3 /h) 348 psi (24 bar) 122 F (50 C) < 82 dba Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Stainless steel Weight 59.5 lbs. (27 kg) 40.9 in (104 cm) Width 15.7 in (40 cm) 8.3 in (21 cm) Air inlet F 3/4" BSP Fluid inlet M 26 x 125 M 3/8" NPS Configuration of the FLOWMAX F pump Set-up Drain rod Suction rod Atomization air Air Fluid Pump output filter Bare Wall-mounted l Wall-mounted l l - l l Cart-mounted l l - l l part number Pump, F, w/m, c/w pump air reg, filter, w/o suction Pump, F, w/m, c/w pump air reg, 55 gal. rod,filter Pump, F, w/m, c/w pump air reg, 5 gal rod, w/o filter Pump, F, w/m, c/w pump air reg, 55 gallon rod, w/o filter Pump, FPH, c/w pump air reg filter, 5 gallon rod Pump, FPH, c/w pump air reg filter, 55 gallon rod Carts and rods (suction and flushing) Two post cart w/o plate Two post pump mounting plate Easyflow suction rod, 5 gal Easyflow suction rod, 55 gal Stainless steel flushing rod F18 x

10 PDM pump Airspray circulating For low circulation loops, the PDM is the best choice. This pump is found in a multitude of applications throughout the world for medium to large factories that have dedicated colors in the wood, metal and plastic industries. Simple design Diaphragm made of PTFE Compact design Easy operation and maintenance Compatible with most water-based materials Makes it easy to have multiple pumps in a small paint kitchen room Pressure ratio 1:1 Fluid volume per cycle fl oz (350 cm 3 ) Number of cycles per 33.8 oz (1 liter) of product gal/mn (10.5 L/mn) 10 gal/mn (38 L/mn) 122 F (50 C) <70 dba Weight - wall-mounted 28.6 lbs. (13 kg) PTFE, Stainless steel, Aluminum 11.4 in (29 cm) Width 9.6 in (24.5 cm) 12.4 in (31.5 cm) Air inlet F 3/8" BSP Fluid inlet M 26 x 125 F 1/2" NPS Configuration of the PDM pump Set-up Suction rod Drain rod Atomization air Air Fluid Pump output filter Bare pump Wall mounted pump l - - l Suction rods Easyflow suction rod, 5 gal Easyflow suction rod, 55 gal part number Pump, PDM , w/m, 55 gallon rod

11 Pressure pots Pressure pots 2 Gallon pots The 2 gallon (Non-ASME) pot is designed to feed most coatings in feed applications. Solvent resistant glass on gauges Aluminum cup construction (2 quart cup) Stainless steel fluid passages (2 gallon pot) Anti-stick PTFE coating (2 gallon pot) Easy to clean and view without distortion Lightweight and easy to handle Compatible with most coatings Easy to clean and maintain specifications 2 quart cup 2 gallon pot 2 gallon pot with agitator Capacity 2.5 quarts / (2.75 L) 2.5 gallons / (11 L) Material Forged aluminum Diameter 5 1/8 / (13 cm) 11 3/8 / (29cm) (cup/pot only) 8 3/4 / (22.2 cm) 10 1/2 / (26.7 cm) Number of clamps screw on lid 4 Weight 2.5 lbs. (1.3 kg) 32 lbs. (14.5 kg) 36.5 lbs. (16.5 kg) Number of handles Removable aluminum liner No 2.5 gallons / (11 L) Maximum inlet 50 psi / (3.5 bar) 80 psi / (6 bar) Maximum temperature 122 F / (50 C) Air (s) 1 1 or 2 Number of fluid outputs 1 upper Agitator No No Yes Hose connection 2 quart cup 2 gallon pot 2 gallon pot with agitator Fitting Air inlet 1/4NPSM 1/4NPSM 3/8NPTM 3/8NPSM 3/8NPSM 3/8NPSM CONFIGURATION OF 2 gallon pot agitators Pot Atomization Agitator 2 gallon pot Yes Yes gallon pot c/w single Yes gallon pot c/w agitator Yes Yes Yes gallon pot c/w agitator, single Yes - Yes system part numbers System, 2.5 gallon pot, c/w M22 BasiK, 12BA System, 2.5 gallon pot, c/w M22 15EN System, 2.5 gallon pot, c/w M22 12EP System, 2.5 gallon pot, c/w M22 12E System, 2.5 gallon pot, c/w M22B glue gun kit System, 2.5 gallon pot, c/w M22B 12BA3, agitator System, 2.5 gallon pot, c/w M22 15EN3, agitator System, 2.5 gallon pot, c/w M22 12E3, agitator System, 2.5 gallon pot, c/w S3A 08ESG KHVLP System, 2.5 gallon pot, c/w S3A 15ESG KHVLP System, 2.5 gallon pot, c/w S3P 12ESG, agitator System, 2.5 gallon pot, c/w M22 HTVP 18/04, 25ft hose System, 2.5 gallon pot, c/w M22 HTVP 18/05, 25ft hose System, 2.5 gallon pot, c/w M22 HTVP 22/06, 25ft hose System, 2.5 gallon pot, c/w M22 HPAP, 15EG1, glue gun kit

12 Pressure cups 2 Quart cup Pressure pots Airspray spraying technologies The 2 quart cup is great for small batch jobs and fast color changes. 2 quart cup Fittings and air treatment Airmix Plural component pumps and machines Electrostatic spraying and equipment 2 quart cup c/w gauge maintenance parts Lid gasket for 2 quart cup Lid gasket for 2 gallon pot part number System, 2 quart, M22 12EN3, c/w 5ft hose kit System, 2 quart, M22 12EP3, c/w 5ft hose kit System, 2 quart, c/w M22 12E3 5ft hose kit System, 2 quart, c/w M22 12E3 10ft hose kit AIRLESS

Reduced fatigue and excellent working conditions for increased productivity Compatible with water-based materials

Reduced fatigue and excellent working conditions for increased productivity Compatible with water-based materials AIRMIX SPRAYING XCITE AIRMIX GUN AIRMIX SPRAY GUNS New Sensations for New Performances The Xcite gun is the result of KREMLIN REXSON experience since 1925. The Xcite gun brings an excellent comfort to

More information

www.kremlin-rexson.com FURNITURE Single or bi-component electrostatic applications Elements single or bi-component bonding sprayed or extruded. All manual or automatic process furniture finish: varnishes,

More information

AIRLESS ASI 24 AND 40 SPRAY GUNS - STAINLESS STEEL

AIRLESS ASI 24 AND 40 SPRAY GUNS - STAINLESS STEEL AIRLESS ASI 24 AND 40 SPRAY GUNS - STAINLESS STEEL AUTOMATIC AIRLESS SPRAY GUNS High output FEATURES Equipped with 2 fluid inlets No spring in the fluid passages Large choice of tips BENEFITS Allows for

More information

EXEL Bringing New Pumping Technology

EXEL Bringing New Pumping Technology Manual Airmix Catalog EXEL Bringing New Pumping Technology 2 The most efficient manual production spray technology in the world. Absolutely Nothing Compares When looking for an outstanding finish at industrial

More information

Bellows Pumps. The Newest Technology in Piston Pumps

Bellows Pumps. The Newest Technology in Piston Pumps Bellows Pumps The Newest Technology in Piston Pumps Merkur Bellows The gentle pumping action of the Merkur Bellows Pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive

More information

ADDITIONAL DOCUMENTATIONS SPARE PARTS

ADDITIONAL DOCUMENTATIONS SPARE PARTS SPECIFICATIONS FLOWMAX PUMP model 08-120 F & 08-120 FT model 16-120 F & 16-120 FT Manual : 0309 573.038.212 Date : 1/09/03 ADDITIONAL DOCUMENTATIONS SPARE PARTS PUMPS 08-120 F and 08-120 FT 16-120 F and

More information

Launching File. New EOS 10-C18 Pump

Launching File. New EOS 10-C18 Pump Launching File New EOS 10-C18 Pump Contents Presentation Description Target Markets Applied Products Applications Efficiency Optimization Simplicity 2 Marketing Contents 1. Presentation 2. Description

More information

INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment

INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment INFG-2R 10/10 Gemini & Infinity Finishing Pumps & Equipment Pump Basics for Smooth Operation Fluid Characteristics Influence Pump Selection Consider the following fluid characteristics when choosing your

More information

ADDITIONAL DOCUMENTATIONS FOR PUMPS, MODEL F and FT

ADDITIONAL DOCUMENTATIONS FOR PUMPS, MODEL F and FT SPECIFICATIONS STAINLESS STEEL AIRMIX PUMPS model 20-50 F and 20-50 FT Manual : 0309 573.032.212 Date : 01/09/03 ADDITIONAL DOCUMENTATIONS FOR PUMPS, MODEL 20-50 F and 20-50 FT SPARE PARTS : Wall mounted

More information

ADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL F

ADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL F SPECIFICATIONS AIRMIX PUMP model 20-25 Flowmax Manual : 0304 573.027.212 Date : 18/04/03 ADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL 20-25 F SPARE PARTS : Wall mounting pump (doc. 573.122.050) Air motor

More information

ADDITIONAL DOCUMENTATIONS SPARE PARTS

ADDITIONAL DOCUMENTATIONS SPARE PARTS SPECIFICATIONS AIRSPRAY PNEUMATIC PUMP model 04-120 Manual : 0311 573.035.212 Date : 20/11/03 ADDITIONAL DOCUMENTATIONS SPARE PARTS Wall mounted unit Doc. 573.072.050 Fluid section Doc. 573.049.050 Air

More information

General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 03

General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 03 General Catalogue Fluid materials Experts in Finishing and Dispensing Solutions V. 03 www.kremlin-rexson.com AIRLESS M250 AIRLESS AIRLESS SpRAy guns 1 2 3 4 5 6 7 Recommended for quality AIRLESS industrial

More information

Zip 52 Finishing Perfect Flow. Excellent finishing quality High reliability Versatile and economic. Industrial Solutions

Zip 52 Finishing Perfect Flow. Excellent finishing quality High reliability Versatile and economic. Industrial Solutions Industrial Solutions Zip 52 Finishing Perfect Flow Double Diaphragm pumps for Airspray Application Excellent finishing quality High reliability Versatile and economic WAGNER Airspray - Perfect finishing

More information

INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment

INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment INFG-2R 10/10 Gemini & Infinity Finishing Pumps & Equipment Pump Basics for Smooth Operation Fluid Characteristics Influence Pump Selection Consider the following fluid characteristics when choosing your

More information

Selection Guide. AIRMIX and AIRLESS manual spray equipment Hot spraying.

Selection Guide. AIRMIX and AIRLESS manual spray equipment Hot spraying. Selection Guide AIRMIX and AIRLESS manual spray equipment Hot spraying www.kremlinrexson.com AIRMIX and AIRLESS manual spray equipment Hot spraying Editorial KREMLIN REXSON are delighted to present the

More information

General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 01

General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 01 General Catalogue Fluid materials Experts in Finishing and Dispensing Solutions V. 01 www.kremlin-rexson.com EDITORIAL Over the past 85 years, Kremlin Rexson have been working in the Those equipment are

More information

Spray Equipment for Every Purpose Industrial Selection Guide

Spray Equipment for Every Purpose Industrial Selection Guide Spray Finishing Equipment Selection Guide A98-142R Spray Equipment for Every Purpose Industrial Selection Guide Choosing a Spray Outfit is as easy as 1 2 3! 1 Paint Usage Per Day Getting Paint to the Spray

More information

Selection Guide. Manual airspray equipment.

Selection Guide. Manual airspray equipment. Selection Guide Manual airspray equipment www.kremlinrexson.com Manual airpsray equipment Editorial KREMLIN REXSON are delighted to present the product selection guide for manual airspray equipment. KREMLIN

More information

6-7/16" (164 mm) 6" (152 mm) Torque in. lbs. 4-7/8" (124 mm)

6-7/16 (164 mm) 6 (152 mm) Torque in. lbs. 4-7/8 (124 mm) Gemini / Diaphragm Pumps Max. Flow Pump #88830 (SS), #8883 (Polypro), #88833 (Polypro), #88836 (Acetal), #88837 (Alum), #8883 (Acetal), #88834 (SS), #88835 (Polypro), #88838 (Alum) /" NPT (F) Fluid Outlet

More information

RAZOR. RAZOR HVLP Spray Guns

RAZOR. RAZOR HVLP Spray Guns RAZOR RAZOR HVLP Spray Guns Provides generous material flow that helps you get the job done quickly Offers exceptional atomization rate Promotes a superior finish Proven effective for clear coat, base

More information

AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications

AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Air Spray Gun Advanced Spraying Technology Whether you are a custom shop or a high

More information

General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 03

General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 03 General Catalogue Fluid materials Experts in Finishing and Dispensing Solutions V. 03 www.kremlin-rexson.com EDITORIAL Over the past 90 years, Kremlin Rexson have been working in the Those equipment are

More information

TritonTM. High quality fine finish spray packages for wood and metal applications. Proven Quality. Leading Technology.

TritonTM. High quality fine finish spray packages for wood and metal applications. Proven Quality. Leading Technology. TritonTM High quality fine finish spray packages for wood and metal applications Proven Quality. Leading Technology. Finally... a spray package specifically designed for the TRITON is an air-operated diaphragm

More information

TROPHY SERIES. Application Versatility Robust Design Ergonomics ATOMIZATION. Start With Confidence. Finish With A Trophy.

TROPHY SERIES. Application Versatility Robust Design Ergonomics ATOMIZATION. Start With Confidence. Finish With A Trophy. ATOMIZATION Start With Confidence. Finish With A Trophy. Application Versatility and Consistent Championship Performance That s What You Can Expect From Binks Trophy Series Equipment. Whatever size job

More information

Process Equipment. Air-Operated Pumps for Process Industries

Process Equipment. Air-Operated Pumps for Process Industries Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer

More information

High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings

High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings Genuine Graco Genuine Graco parts and accessories make the difference Get superior spray results with Graco parts Rely

More information

ITW Binks Table of Contents

ITW Binks Table of Contents ITW Binks Table of Contents Spray Guns-Accessories HVLP Spray Guns...2 Conventional and Additional Spray Guns... 3-5 Airless Twist Tips...6 Airless Paint Spray Hose...6 Spray Gun Extensions...7 Spray Gun

More information

Ink Manufacturing and Printing Solutions

Ink Manufacturing and Printing Solutions Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications Springer Pumps, LLC Tel: 866-777-6060 Fax: 866-777-6383 INFO@springerpumps.com Leading The Way In Quality

More information

Triton. High quality fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY.

Triton. High quality fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY. Triton High quality fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY. Finally... a spray package specifically designed for the TRITON is an air-operated diaphragm

More information

TROPHY SERIES. Application Versatility Robust Design Ergonomics ATOMIZATION. Start With Confidence. Finish With A Trophy.

TROPHY SERIES. Application Versatility Robust Design Ergonomics ATOMIZATION. Start With Confidence. Finish With A Trophy. ATOMIZATION Start With Confidence. Finish With A Trophy. Application Versatility and Consistent Championship Performance That s What You Can Expect From Binks Trophy Series Equipment. Whatever size job

More information

Fluid Dispensing Systems

Fluid Dispensing Systems Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028

More information

INFG-1R 3/04. Gemini & Infinity. Finishing Pumps & Equipment

INFG-1R 3/04. Gemini & Infinity. Finishing Pumps & Equipment INFG-1R 3/04 Gemini & Infinity Finishing Pumps & Equipment Binks Over 100 Years of Leadership & Innovation Table of Contents Binks................................... 2 Pump Basics for Smooth Operation........

More information

NEW! NEW! Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements: PSI

NEW! NEW! Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements: PSI High Transfer Efficiency AQMD Compliant Ultra-Fine Atomization Precision Fan Control Easy-Clean Gun Body Built-In Cheater Valve Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements:

More information

Automotive Spray Gun Equipment Selection Guide

Automotive Spray Gun Equipment Selection Guide Automotive Spray Gun Equipment Selection Guide www.binks.com www.devilbiss.com 77-5920 Selecting The Right Equipment It s Critical to Use the Right Equipment for Each Application Using the right equipment

More information

Selection guide. Automatic spraying equipment.

Selection guide. Automatic spraying equipment. Selection guide Automatic spraying equipment www.kremlinrexson.com Automatic spraying equipment Editorial KREMLIN REXSON are delighted to present the product selection guide for Automatic spraying equipment.

More information

Husky 515 / 716 Air-Operated Diaphragm Pumps

Husky 515 / 716 Air-Operated Diaphragm Pumps First choice when quality counts. Husky 515 / 716 Air-Operated Diaphragm Pumps 515 1/2 in. non-metallic pumps in acetal, polypropylene, and kynar 716 3/4 in. metal pumps in SST, aluminum No seals to leak

More information

INSTRUCTION MANUAL ASI 24 AND ASI 40 AIRLESS GUN STAINLESS STEEL MODEL

INSTRUCTION MANUAL ASI 24 AND ASI 40 AIRLESS GUN STAINLESS STEEL MODEL l INSTRUCTION MANUAL ASI 24 AND ASI 40 AIRLESS GUN STAINLESS STEEL MODEL Manual : 1208 573.175.112 Date : 23/08/12 - Supersede : 19/10/11 Modif. : Update TRANSLATION FROM THE ORIGINAL MANUAL IMPORTANT

More information

Bellows Pumps. The Newest Technology in Piston Pumps

Bellows Pumps. The Newest Technology in Piston Pumps Bellows Pumps The Newest Technology in Piston Pumps Merkur Bellows The gentle pumping action of the Merkur Bellows Pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive

More information

Fluid Handling Products

Fluid Handling Products PRODUCT CATALOG Fluid Handling Products Maximize Production. Optimize Results. The Leaders in Spray Finishing Products Table of Contents Pogo Pump: Drum Mounted Low Pressure Piston Pump Pressure Tanks:

More information

Liquid Coating. Product Catalog

Liquid Coating. Product Catalog Liquid Coating Product Catalog Liquid Coating Catalog 1 Liquid Coating Catalog Industrial Coating Systems About Nordson Nordson is the leader in precision dispensing equipment for applying industrial

More information

Airless spraying & equipment. Catalog V5.1. Premium for finishers in heavy applications. Apply your Skills.

Airless spraying & equipment. Catalog V5.1. Premium for finishers in heavy applications. Apply your Skills. Airless spraying & equipment Catalog V5.1 Premium for finishers in heavy applications Apply your Skills Airless spraying & equipment Editor s note in order to help you increase your competitiveness, Sames

More information

Triton. Affordable fine finish spray packages for wood and metal applications Proven Quality. Leading Technology.

Triton. Affordable fine finish spray packages for wood and metal applications  Proven Quality. Leading Technology. Triton Affordable fine finish spray packages for wood and metal applications Proven Quality. Leading Technology. Finally...a diaphragm spray package specifically designe Triton Spray Packages Key Applications

More information

Oil & Light Fluid Pumps

Oil & Light Fluid Pumps Oil & Light Fluid Pumps OilMaster Air Operated Pumps Features 2 adjustable bung adapter included Built-in pressure relief Quiet operation Low air consumption Compact design for tight installations Specifications

More information

Excellence for. Experience. industrial coating. The big WAGNER Liquid application 2015 WAGNER

Excellence for. Experience. industrial coating. The big WAGNER Liquid application 2015 WAGNER Excellence for industrial coating. Experience WAGNER WAGNER is one of the market leading manufacturers of high tech systems and components for the application of liquid and powder lacquers and other paints

More information

TRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

TRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE. l SPECIFICATIONS STAINLESS STEEL AIRMIX PRESSURE REGULATOR Models : 250-10 / 70 250-10 / 120 120-5 / 40 Manual : 1310 573.041.212 Date : 10/10/13 - Supersede : 21/09/10 Modif. : Update TRANSLATION FROM

More information

Husky 716 Metal Pumps Air-Operated Double-Diaphragm

Husky 716 Metal Pumps Air-Operated Double-Diaphragm Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled

More information

Air Supply Controls & Gauges

Air Supply Controls & Gauges HAR Air Regulators General purpose regulators for line takeoff use or as integral regulators on pumps, pressure tanks and other air operated devices. Require separate trap or filter in air line to remove

More information

LD Series Electronic Meters

LD Series Electronic Meters LD Series Electronic Meters Manual and Preset Dispense Dispenses in gallons, quarts, pints and liters Easy to read LCD display with durable switches for long life Rugged engineered material for superior

More information

Conventional Series Features and Benefits

Conventional Series Features and Benefits Conventional Series Features and Benefits Durability 1 300-grade stainless steel fluid passages offer waterborne compatibility, 4 Trigger is designed with reinforced wear points. corrosion resistance and

More information

Triton. Affordable fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY.

Triton. Affordable fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY. Triton Affordable fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY. Diaphragm spray packages designed specifically for the Triton is an air-operated diaphragm

More information

Process Equipment. Pumping Solutions for Process Industries. Springer Pumps, LLC. Tel: Fax:

Process Equipment. Pumping Solutions for Process Industries. Springer Pumps, LLC. Tel: Fax: Process Equipment Pumping Solutions for Process Industries Electric Double Diaphragm Pumps Husky 1050e Diaphragm Pumps Eliminate unnecessary pump failures, improve your facilities energy efficiency and

More information

Excellence for. Experience Strong brands strong performance. industrial coating. The big WAGNER Liquid application 2017

Excellence for. Experience Strong brands strong performance. industrial coating. The big WAGNER Liquid application 2017 Excellence for industrial coating. Experience Strong brands strong performance Whether for the wood industries, in the areas of infrastructure, agriculture and construction machinery, transport, automotive,

More information

Tanques de Presión. ASME Code Stainless Steel, Galvanized and ASME PT Series Tanks A R 10/11

Tanques de Presión.  ASME Code Stainless Steel, Galvanized and ASME PT Series Tanks A R 10/11 Tanques de Presión ASME Code Stainless Steel, Galvanized and ASME PT Series www.tecnorte.com A183-100 R 10/11 Guía De Selección The Case for ASME Code : Numerous government and insurance bodies (e.g. OSHA,

More information

Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm

Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky

More information

Master Catalogue I August 2011

Master Catalogue I August 2011 Master Catalogue I August 2011 Greasing Equipment Drum Pumps Hose Reels Vehicle Hoists Wheel Service Equipment Lubrication Systems Chemical & Solvent 41 NDP-15FVT 1/2 Chemical Suitable for the transfer

More information

Process Equipment. Pumping Solutions for Process Industries

Process Equipment. Pumping Solutions for Process Industries Process Equipment Pumping Solutions for Process Industries Electric Double Diaphragm Pumps Husky Electric Diaphragm Pumps Eliminate unnecessary pump failures, improve your facilities energy efficiency

More information

BINKS STEADI-GRIP SG-2 2 QT. PRESSURE CUPS MODEL NO (STANDARD) (OBSOLETE) MODEL NO (WITH AGITATOR) (OBSOLETE)

BINKS STEADI-GRIP SG-2 2 QT. PRESSURE CUPS MODEL NO (STANDARD) (OBSOLETE) MODEL NO (WITH AGITATOR) (OBSOLETE) SERVICE MANUAL EN BINKS STEADI-GRIP SG-2 2 QT. PRESSURE CUPS MODEL NO. 80-350 (STANDARD) (OBSOLETE) MODEL NO. 80-351 (WITH AGITATOR) (OBSOLETE) INTRODUCTION Binks Steadi-Grip SG-2 Pressure Cup is ideal

More information

Merkur. High Performance Fine Finish Packages

Merkur. High Performance Fine Finish Packages High Performance Fine Finish Packages Advanced Technology. Superior Performance. The new and improved packages are designed to outperform and outlast other pumps in their class. With more models and configurations

More information

OPERATOR S MANUAL A

OPERATOR S MANUAL A OPERATOR S MANUAL 670144-A INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-18-15 1/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) (REV: A) 67 0144-A READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

More information

XTREME Dependable, high-performance airless spray packages for the toughest protective coatings applications.

XTREME Dependable, high-performance airless spray packages for the toughest protective coatings applications. XTREME Dependable, high-performance airless spray packages for the toughest protective coatings applications. PROTECTIVE COATINGS PROVEN QUALITY. LEADING TECHNOLOGY. Proven Design and Performance. AIRLESS

More information

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading. hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI

More information

Industrial Solutions. IceBreaker HP piston pumps. Tremendously powerful High economy Universal use

Industrial Solutions. IceBreaker HP piston pumps. Tremendously powerful High economy Universal use Industrial Solutions IceBreaker HP piston pumps Tremendously powerful High economy Universal use Pneumatic IceBreaker HP piston pumps Pure power! Tiger, Leopard, Puma, Wildcat... With these high pressure

More information

Hours of Operation: Weekdays: 7:30 a.m. to 5:30 p.m. (Central Time)

Hours of Operation: Weekdays: 7:30 a.m. to 5:30 p.m. (Central Time) Hours of Operation: Weekdays: 7:30 a.m. to 5:30 p.m. (Central Time) Orders... (800) 877-4857 Service and Trouble-Shooting Assistance...(715) 234-1617 24-Hour Fax Information and Orders...(715) 236-7032

More information

WATERBORNE COMPATIBLE

WATERBORNE COMPATIBLE I-2170 4-02 HVLP and Conventional Air Spray Guns and Accessories Air atomizing spray guns for high-quality industrial finishing. Spray Guns Air Caps Fluid Tips and Needles Paint Cups Accessories WATERBORNE

More information

Catalog V5.1. Airspray spraying & equipment. Apply your Skills. Manufacturer since 1925, bringing you the very best of the Finishing applications

Catalog V5.1. Airspray spraying & equipment. Apply your Skills. Manufacturer since 1925, bringing you the very best of the Finishing applications Airspray spraying & equipment Catalog V5.1 Manufacturer since 1925, bringing you the very best of the Finishing applications Apply your Skills Airspray spraying & equipment Editor s note in order to help

More information

Pressure Tanks, Dual Regulated, Bottom Outlet,

Pressure Tanks, Dual Regulated, Bottom Outlet, Pressure Tanks, Dual Regulated,, Pressure Cups, Mixers. Pressure Tanks, Pressure Cups, Mixers Accessories Pressure Cups Tanks Tanks Mixers 1 Quart Pressure Cups 1 Quart Pressure Assist Cups These 1 quart

More information

Catalog V5.2. Creator since 1975, bringing the perfect mix between quality and productivity. Apply your Skills

Catalog V5.2. Creator since 1975, bringing the perfect mix between quality and productivity. Apply your Skills Airmix spraying & equipment Catalog V5.2 Creator since 1975, bringing the perfect mix between quality and productivity Apply your Skills SAMES KREMLIN reserves the right to modify the equipment introduced

More information

Equip yourself for dispensing success. Zep Professional Dispensing Solutions.

Equip yourself for dispensing success. Zep Professional Dispensing Solutions. Equip yourself for dispensing success. Zep Professional Dispensing Solutions. Zep Professional Dispensing Solutions. The right product at the right dilution. In order to use any cleaning or maintenance

More information

Monark 23:1; President 30:1 and 46:1

Monark 23:1; President 30:1 and 46:1 GRO FINISHING EQUIPMENT SPRY FINISHING PKGES Monark 23:1; President 3:1 and 46:1 Features and enefits irless spray technology allows ability to spray a variety of fluids from conventional coatings to high

More information

AOM SPRAY EQUIPMENT 5005 SANBUSCO DR. NE RIO RANCHO, NM or FAX: HTTP:

AOM SPRAY EQUIPMENT 5005 SANBUSCO DR. NE RIO RANCHO, NM or FAX: HTTP: AOM SPRAY EQUIPMENT 5005 SANBUSCO DR. NE RIO RANCHO, NM 87144 505-867-1946 or 1-800-533-6254 FAX: 505-867-1948 HTTP: WWW.AOMSPRAY.COM 2013 PRICE LIST SUBJECT TO CHANGE WITHOUT NOTICE TERMS: NET 30 DAYS,

More information

RAINING DIVISION. Equipment Selection for the Painting Contractor

RAINING DIVISION. Equipment Selection for the Painting Contractor RAINING DIVISION Equipment Selection for the Painting Contractor 1. THE APPLICATION: Assuming that a spray process is selected as the best method for the application of a coating, then the selection of

More information

BINKS PRESSURE TANKS FLUID HANDLING. ASME Code Stainless Steel, Galvanized, and ASME PT Series Tanks.

BINKS PRESSURE TANKS FLUID HANDLING. ASME Code Stainless Steel, Galvanized, and ASME PT Series Tanks. FLUID HANDLING ASME Code Stainless Steel, Galvanized, and ASME PT Series Tanks The case for ASME Code Tanks: Numerous government and insurance bodies (e.g. OSHA, your fire marshal, your insurance underwriter,

More information

INDUSTRIAL DYEING PUMPS

INDUSTRIAL DYEING PUMPS INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending

More information

Process Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications

Process Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications Process Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications PROVEN QUALITY. LEADING TECHNOLOGY. Table of Contents PROCESS EQUIPMENT AND ACCESSORIES TABLE OF CONTENTS Selection

More information

Four-Check Piston Pumps

Four-Check Piston Pumps Four-Check Piston Pumps Concept and Theory Training Table of Contents Introduction... 1 Module Purpose... 1 Primary Audience... 1 Benefits to You...1 Objectives...1 How Do I Use This Module?...1 What Materials

More information

time! every The perfect surface Advanced solutions for manual & automatic wood finishing Perfect surfaces. High efficiency. Great reliability.

time! every The perfect surface Advanced solutions for manual & automatic wood finishing Perfect surfaces. High efficiency. Great reliability. The perfect surface every time! Advanced solutions for manual & automatic wood finishing www.wagner-group.com Perfect surfaces. High efficiency. Great reliability. WAGNER the wood finishing experts Wood

More information

TRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

TRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE. l SPECIFICATIONS STAINLESS STEEL AIRMIX BACK PRESSURE FLUID REGULATOR Model : 120-10 / 120 Manual : 1310 573.042.212 Date : 10/10/13 - Supersede : 21/09/10 Modif. : Update TRANSLATION FROM THE ORIGINAL

More information

OPERATOR S MANUAL

OPERATOR S MANUAL OPERATOR S MANUAL 164622 INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: 12-24-13 REVISED: 1-26-18 (REV: D) 1/2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) 164631, 164633, 164635, 164637 and 161586

More information

AirPro. Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications

AirPro. Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Air Spray Gun Advanced Spraying Technology The AirPro air spray gun delivers exceptional

More information

Airless spraying & equipment. Catalog V5.0. Premium for finishers in heavy applications. Apply your Skills.

Airless spraying & equipment. Catalog V5.0. Premium for finishers in heavy applications. Apply your Skills. Airless spraying & equipment Catalog V5.0 Premium for finishers in heavy applications Apply your Skills Airless spraying & equipment Editor s note in order to help you increase your competitiveness, Sames

More information

Low shear, low pulsation performance delivers superior finish quality

Low shear, low pulsation performance delivers superior finish quality TRITON 3:1 irculating Pumps TRITON 13HP 23375 & 233751 TRITON 38HP 23385 & 233816 Low shear, low pulsation performance delivers superior finish quality FETURES ND ENEFITS Low pulsation output provides

More information

MGFHVLP. Instructions/Parts. Mini Gravity Feed System E. Part No Includes MGFHVLP Mini Gravity Feed Spray Gun and MGC 125 Gravity Cup.

MGFHVLP. Instructions/Parts. Mini Gravity Feed System E. Part No Includes MGFHVLP Mini Gravity Feed Spray Gun and MGC 125 Gravity Cup. Instructions/Parts MGFHVLP Mini Gravity Feed System FOR PRODUCT INFORMATION CALL: 1-800-742-7731 309989E For gravity feed spraying of automotive colors and clears. Ideal for touch-up and detail work. Important

More information

Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar

Versa-Matic. Operating Manual. 3/8 Bolted Plastic Pumps. Polypropylene Kynar Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser

More information

Parts. Parts / Spares Reference Sheet. Graco Triton Packages. For more information: /

Parts. Parts / Spares Reference Sheet. Graco Triton Packages. For more information: / / Spares Reference Sheet Pail Mount Packages (see model descriptions on page 3) Models 33466, 33467, 33468, 3346, 330, 33, 34, 34, 3374, 3374, 864, 8643, 8644, 8645, 8646, 86, and 8648. Items 56 5 are

More information

Industrial Pumping Equipment Air-Operated Diaphragm Pumps

Industrial Pumping Equipment Air-Operated Diaphragm Pumps Industrial ing Equipment -Operated Diaphragm s 85630 85628 85622 85634 ¼" - 2" -Operated s Basic Design Features Diaphragm pumps are driven by compressed air.the directional air distribution valve and

More information

for massive duties. WAGNER PROTEC 2K Mixing and dosing system Robust and dependable. Easy to use. Rapid amortization.

for massive duties. WAGNER PROTEC 2K Mixing and dosing system Robust and dependable. Easy to use. Rapid amortization. for massive duties. WAGNER Mixing and dosing system www.wagner-group.com Robust and dependable. Easy to use. Rapid amortization. Those who mix this way have a clear advantage WAGNER the new mixing unit

More information

Extrusion Pumps and Accessories

Extrusion Pumps and Accessories Extrusion Pumps and Accessories 2 ARO Extrusion Pumps and Accessories Numerical Index MODEL PAGE MODEL PAGE MODEL PAGE MODEL PAGE 128121-800 24 650542-1 11 651537-1 22 66731 18 129121-400 24 650543-1 11

More information

AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications

AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Air Spray Gun Advanced Spraying Technology Whether you are a custom shop or a high

More information

HVLP Spray Guns HVLPR-5 5/06

HVLP Spray Guns HVLPR-5 5/06 HVLP Spray Guns HVLPR-5 5/06 HVLP Spray Guns Table of Contents About HVLP............................. 3 MACH 1 HVLP System Features and Benefits.................... 4 Standard Fluid and Air Nozzle Selection

More information

Process Equipment. Pumping Solutions for Process Industries

Process Equipment. Pumping Solutions for Process Industries Process Equipment Pumping Solutions for Process Industries Ordering Husky Air-Operated Information Double Diaphragm Pumps Husky Pumping Technology Our Husky air-operated double diaphragm pumps are loaded

More information

XM Plural-Component Sprayers. High-Pressure Equipment for Protective Coatings

XM Plural-Component Sprayers. High-Pressure Equipment for Protective Coatings XM Plural-Component Sprayers High-Pressure Equipment for Protective Coatings Graco XM Series. Advanced. Accurate. Affordable. Boost your productivity on demanding high-volume, plural-component jobs Advanced

More information

The Table of Contents has links to each section of this Accessories Guide. Click on any line in the Table of Contents to jump to that page.

The Table of Contents has links to each section of this Accessories Guide. Click on any line in the Table of Contents to jump to that page. ACCESSORIES GUIDE Use genuine Binks and DeVilbiss Accessories, Repair Kits and Replacement Parts to keep your equipment at peak performance binks.com devilbiss.com CarlisleFT.com EA28-100R-8 (9/2016) Navigating

More information

Fluid Handling TecHnology. CLOSED IBC TranSfEr SySTEmS for DIESEL ExhauST fluid (DEf)

Fluid Handling TecHnology. CLOSED IBC TranSfEr SySTEmS for DIESEL ExhauST fluid (DEf) Fluid Handling TecHnology DIESEL EXHAUST FLUID This latest brochure dedicated to Diesel Exhaust Fluid (DEF) handling products introduces several new items to address the ever changing world of DEF. Liquidynamics

More information

Process Equipment. Pumping Solutions for Process Industries

Process Equipment. Pumping Solutions for Process Industries Process Equipment Pumping Solutions for Process Industries Ordering Husky Air-Operated Information Double Diaphragm Pumps Husky Pumping Technology Our Husky air-operated double diaphragm pumps are loaded

More information

funnels, measures, gravity cocks, jerry cans and oil suction pumps...

funnels, measures, gravity cocks, jerry cans and oil suction pumps... funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................

More information

Electrostatic guns - GM Superior finishing Great savings Human engineered design Convenient recipe change. Industrial Solutions

Electrostatic guns - GM Superior finishing Great savings Human engineered design Convenient recipe change. Industrial Solutions Industrial Solutions Electrostatic guns - GM 5000 MANUAL APPLICATION Superior finishing Great savings Human engineered design Convenient recipe change Perfect surface finishing, excellent wrap around,

More information

Industrial Pumping Equipment PileDriver III Series III Air Motor Features

Industrial Pumping Equipment PileDriver III Series III Air Motor Features PileDriver III Series III Air Motor Features These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs. Air motors are 3,

More information

Spray Guns. Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency

Spray Guns. Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency Spray Guns P E R F O R M A N C E S E R I E S AUTOMATIC MANUAL TOUCH-UP Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency www.devilbiss.com

More information

3/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.

3/4 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. OPERATOR S MANUAL PD07P-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 11-30-06 REVISED: (REV. 01) 3/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

More information

Versa-Matic SOLUTIONS. Experience Superior Performance. Multiple Porting Options. Shoe Valve Technology. Adaptable Footprint

Versa-Matic SOLUTIONS. Experience Superior Performance. Multiple Porting Options. Shoe Valve Technology. Adaptable Footprint Versa-Matic SOLUTIONS /2 (.mm) metallic and non-metallic bolted Experience Superior Multiple Porting Options Top, side and end porting for both inlet and discharge Shoe Valve Technology On / Off / On reliability,

More information