ITW Binks Table of Contents

Transcription

1 ITW Binks Table of Contents Spray Guns-Accessories HVLP Spray Guns...2 Conventional and Additional Spray Guns Airless Twist Tips...6 Airless Paint Spray Hose...6 Spray Gun Extensions...7 Spray Gun Cups...8 Tanks - PT ASME Code, Stainless Steel, Galvanized and Accessories Pumps and Pump Packages Finishing Systems/Packages...22 Drum Covers and Agitators...23 Fluid Regulators...24 HVLP Conversion Accessories...25 Spray Gun Accessories Siphon Hoses and Ball Valves...28 Air Control Equipment Accessories...29 Cartridge Respirators...30 Understanding Pressure Drop...31 Premium Spray Finishing Air Hose...32 Fluidall TM Fluid Hose...33 Specialized Hose Assemblies...34 Tubing...35 Hose/Tube Accessories...36 Adapters, Nipples, Swivels...37

2 HVLP Spray Guns MACH 1 SL (Slim Line) HVLP MACH 1A & 1AR HVLP MACH 1 HVLP M1-G HVLP Lightweight, top quality high performance spray gun. Body: Drop-forged anodized aluminum Weight: 16.5 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2665 Gun Repair Kit: Full size lightweight spray gun Body: Drop-forged anodized aluminum Weight: 20.1 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2463 Gun Repair Kit: The M1-G HVLP gravity feed spray gun not only complies with all air quality regulations, but also atomizes and spray as quickly as a conventional air spray gun. Body: Drop-forged aluminum Weight: 21.9 oz. Air Inlet: 1/4 NPS (M) Feed Type: Gravity Part Sheet: 2650 Gun Repair Kit: The MACH 1A Automatic offers total control of atomizing air pressure, side port air, fluid flow and spray patterns in production settings which require automatic equipment. The MACH 1AR Automatic is ideal for application where visual indication of fluid needle location is essential. It is pneumatically activated for application in a variety of automated spray systems. Cub SLG and Cub SL Touch-Up Guns The Cub SLG (gravity feed) and the Cub SL (siphon/pressure) are the finest touch-up and specialty HVLP coating guns. Cub SLG Body: Drop-forged anodized aluminum Weight: 15.2 oz. Air Inlet: 1/4 NPS (M) Feed Type: Gravity Part Sheet: 2735 Gun Repair Kit: Cub SL Body: Drop-forged anodized aluminum Weight: 12.3 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 1/4 NPS (M) Fluid Passage: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2734 Gun Repair Kit:

3 Conventional Spray Guns Spray Guns-Accessories 95 Gun High production spray gun. Body: Drop-forged anodized aluminum Weight: 27 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2625 Gun Repair Kit: Gun Compact, lightweight and well balanced Body: Drop-forged anodized aluminum Weight: 24 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Brass/Electoless nickel plated Feed Type: Pressure/Siphon Feed Part Sheet: 2316 Gun Repair Kit: Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free to order MAIL your order Gravois Rd. St. Louis, MO FAX your order your order WEBSITE Visit our site and link to for on-line ordering 43

4 Additional Spray Guns 95A Automatic Guns Mode Air Blow Gun Conventional style air spray gun that is pneumatically activated for applications with reciprocating, rotary, spindle machines, and in stationary spray gun set-ups Body: Drop-forged anodized aluminum Weight: 20.5 oz. Cylinder Air Inlet: 1/4 NPS (M) Cylinder Air Pressure: 40 PSI Min./100 PSI Max. Atomization Air: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Fluid Pressure: 100 PSI Max. Mounting Hole: 1/2 Part Sheet: 2641 Gun Repair Kit:: Model 95 AV Same features as Model 95A Spray Gun, but a tungsten carbide fluid nozzle and needle are used. For use with abrasive fluids. Model 95AR Same features as Model 95A Spray Gun, but has ratchet type adjustable needle valve control. Recommended for installations requiring numerous fluid control adjustments. Model 7E2 - Heavy Duty Gun Designed for continuous spraying of heavy bodied fluids. Drop-forged aluminum body. Replaceable plated drop-forged brass head. Adjustable floating fluid needle valve. Stainless steel air valve cartridge. Trigger has hardened steel wear plate. Adjustable spray pattern. Air Inlet: 1/4 NPS (M) Fluid Inlet: 1/2 NPS (M) Weight: 1 lb. 14 oz. Part Sheet: 2670 Airless 1 Heavy duty professional spray gun for applying various maintenance and decorative finishes. This lightweight, aluminum-bodied, drop-forged, spray gun features a stainless steel head and fluid passages, ball-type fluid valve, removable valve assembly, tungsten carbide seat, and built-in diffuser. A large rest pad at the back of the spray gun gives excellent operator comfort, in-the-hand support and balance. The thumb-operated safety trigger lock permits one hand locking, unlocking, and triggering. A tip guard is included for added safety. Spray tip not included. Maximum operating pressure is 6000 PSI. Part Sheet: 2340 Model 140B - Heavy Duty Gun Use for dusting, drying, removing chips, etc. Pistol grip style with aluminum diecast body. Nozzle number (complies with paragraph Walsh-Healy Alt and OSHA where air inlet does not exceed 100 PSI) with 1/16 orifice is standard. Optional 5 1/2 extension (60-41) available. 1/4 NPT (m) air inlet. Air consumption 3 1/2 CFM at 50 PSI. Part Sheet: 1108 Use for spraying solvents to clean engines and other machinery. Brass body. Ten inch nozzle/tube length. Has flexible tubing with hose clamp for siphoning solvent from container. Requires 14 CFM air at 50 PSI. 1/4 NPS (m) air inlet. Part Sheet:

5 Additional Spray Guns (cont ) AA4000 Air Assisted Airlesss HVLP The unique tip and air cap design of the new Binks AA 4000 Air Assisted Airless HVLP Spray Gun allows operators to use lower fluid and air pressure than the competition to achieve an exceptionally fine finish. Maximim Fluid Pressure: 4000 PSI / 275 bar Maximum Air Pressure: 100 PSI / 6.8 bar Body: Forged aluminum Weight: 16 oz. Air Inlet: 1/8 NPT (M) x 1/4 NPS (M) Fluid Inlet: 1/4 NPS (M) Thread Fluid Passages: Stainless Steel Feed Type: Siphon Feed Part Sheet: 2776 AA1500 Air-Assisted Airless Spray Gun The unique tip and air cap design of this new spray gun allows operators to use lower fluid and air pressure than the competition to achieve a superior finish. Max. Fluid Pressure: 1500 psi/105 bar Max. Air Pressure: 100 psi/6.8 bar Gun Body: Forged Aluminum Fluid Path: Stainless Steel Fluid Shut Off Type: Stainless Steel Ball Standard UHMW Seat or Optional Tungsten Carbide Fluid Inlet Size: 1/4 NPS (m) Thread Air Inlet Size: 1/8 NPT (m) x 3/8 O.D. Push-In - Tube Fitting or D.M. Nipple Gun Weight: 16 oz./500 g Wren Airbrush Single action style. Air and fluid are delivered simultaneously. Wren Outfits Set No. 1 Includes airbrush, 1/2 fl. oz. color bottle C Airbrush Set No. 2 Includes airbrush, 1/4, 1/2 and 2 fl. oz. color bottle assemblies, 6 lightweight vinyl hose with connections and case B Airbrush Airless 1 Spray Gun The Binks Airless 1 spray gun is a heavy-duty professional spray gun. Short, two finger trigger and low pull effort give a natural feel. A thumb operated safety trigger lock permits one hand locking and unlocking. Body: Drop-Forged Anodized Aluminum Weight: 27 Ounces Air Inlet: N/A Fluid Inlet: 1/4 NPS (M) Fluid Passage: Stainless Steel Feed Type: High Pressure psi max. working Part Sheet: 2340 Gun Repair Kit: Accessories Enhance the versatility of your Airless 1 Gun with Binks service-proven accessories. Twist-Tip Nozzle Cleaner Light-weight, stainless steel, Twist-tip assembly makes nozzle cleaning easy. Adjust-a-Fan Spray patterns from 4 to 22 inches wide. Nozzle Extensions Attache to airless guns for access to hard-to-reach areas. Airless Gun Swivel /4 NPS (m) x 1/4 NPS (f) Swivel Nut. Adjust-a-Fan Orifice Range Model No. Material to be sprayed (inches) Lacquers and Stains.007 to Latex and Enamels.011 to High Builds.017 to Extremely Heavy.021 to.054 Features include: Single acting style; simple to operate; easy to maintain; versatile Wren Outfit includes: Airbrush, 1/4, 1/2 and 2 fluid oz. color bottle assemblies and (6 ft.) of lightweight vinyl hose with connections, packed in an attractive, clear plastic case 45

6 Airless Twist Tips State of the art twist tip assemblies to fit all brands of airless guns. Binks twist tip assemblies can also be used as direct replacements for the most popular brans of airless twist tips on the market. Binks twist tips meet all the needs of residential, commercial and industrial painting contractors. High quality tungsten allows for non-distorted spray patterns and high paint volume output before tip replacement is necessary. The chart at below reflects the most common tips for the professional painting industry. Surface Coating Fan Width Orifice Size (in inches) Wood Interior Stain, Sanding Cabinets, Paneling Sealer, Lacquer Varnish, Shellac Enamels Interior Walls Latex, Vinyl Ceilings, Drywall Acrylic Plaster Overhang Primers, Enamels Masonry Block Vinyl, Acrylic Stucco, Concrete Latex, Oil Base Alkyds Wood Exterior Exterior, Stains Shingle Siding, Latex, Vinyl Shiplap Acrylic Open Joist MIL White Ceiling Areas HI Build BASE RETAINERS Assembly Number 3/4-20(B) 7/8-14(G) 11/16-16(F) Binks Binks, Graco, AMSpray, Spray Titan, Wagner Tech, Wagner Ordering: For twist tips add the prefix 454-to size tip selected. For example, if you select 517, order as Flat tips also available to order add 9-as a prefix. For example, if you select 413, order as Airless Paint Spray Hose Airless Hose Size 50 FT. Bulk Package (100 Units ) Connector 1/ /4 NPS Size 30 Whip Connector 3/ Assembly Only 1/4 NPS (F) x 1/4 NPS (M) Hose I.D. 1/4 Connection Thread: 1/4 NPS (f) Hose Connection: Swivel both ends Spring Guards: Both ends Static conducting Polyurethane cover Nylon inner tube Reinforcement: Braided textile yarn Operating Temp: (0 o F to o F) Min. Bend Radius: 2.5 In. Working Pressure: 3,300 psi Burst Pressure: 13,200 psi 46

7 Spray Gun Extensions Spray Guns-Accessories CLEARANCE MODEL DIAMETER NOZZLE SET-UP OPTIONAL LENGTHS FOR GUN PART SHEET (INCHES) (INCHES) MODEL REFERENCE EA 1 3/4 Std. External or Internal Mix 9, 15, 24, , 95A 2659, 2660 EB 3 Std. External or Internal Mix 6, 12, 18, , 95A 2659, 2660 EN 2 1/2 Std. External or Internal Mix 6, 12, 18, , 48, 60, 72, 84 95, 95A 2659, 2660 C 3/4 Circular (360 o ) 6, 9, 12, 15, 18, 24, , 2082 HC 90 o 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660 SC 3/8 Circular (360 o ) 9, 12, 18, , 39, 51, 63, 75, 87 95, 95A 2659, /8 Special for Pipe Interior 1/4 in. Pipe not included Gun not Circular 360 o required High volume material flow Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free to order MAIL your order Gravois Rd. St. Louis, MO FAX your order your order info@fluidair.com WEBSITE Visit our site and link to for on-line ordering 47

8 Spray Gun Cups Siphon Cups Pressure Cups Steadi-Grip 2 Cups Model SG-2 (Steadi-Grip 2) Two Quart Pressure Cup Part Sheet: 2658 Model One Quart Standard Part Sheet: 2378 EZ2 Solvent Saver Cup Cup features exclusive non-stick coating inside and out that wipes clean in seconds. Fits Spray Gun Models 95, 2001, and the MACH 1 Series of handguns. Model One Quart Drip Proof Model SG-2 (Steadi-Grip 2) Two Quart Pressure Agit Cup Part Sheet: 2658 Model One-Quart DripProof clamp type with extra vent tube. Weight 16 ozs. 3/8 NPS (f) Part Sheet: 2250 Model Two Quart Steadi-Grip with handle. Weight: 3.5 lbs. Part Sheet: 1619 Model Fifty ounce stainless steel pressure cup Model One Quart stainless steel pressure cup and 15 PSI regulator Model One Quart. Furnished with pressure regulator and gauge 50 PSI max. Shipping weight 3 lbs. Part sheet: 1149 Model Eight Ounce clamp type. Shipping Weight 8 oz. 1/4 NPS (F) Part Sheet: Adapter for 3/8 NPS (f) connection to spray gun Model (not shown) Stainless steel eight ounce 3/8 NPS (f) outlet Part Sheet: 2679 Model One Quart clamp-type. Shipping weight 16 ozs, 3/8 NPS (f) Part Sheet: 2250 Model (not shown) One Quart stainless steel Accessories for Steadi-Grip Disposable liner for and Qty. pack of 12 disposable liners for and Thiokol gasket for and

9 PT ASME Code Tanks New-Economical ASME certification makes the Binks PT Series the only code PT tanks available in the workplace that meet OSHA regulations for using flammable and combustible materials. Binks new stainless and zinc ASME certified PT Series Tanks are economical and designed for use with waterborne and flammable materials that can be applied at less than 80 PSI. All PT Series tanks feature a 2.8 gallon capacity and low profile tank design which accepts U.S. and Canadian one-gallon pails. Zinc Plated for Solvent-Based Coatings Ideal for solvent-based coatings. Optional disposable tank liner. Zinc plated lid and all wetted parts in lid assembly including: fluid tube, lid bushing, outlet elbow and fitting, and agitator shaft. Zinc plated tank shell. Zinc Plated Lid and Tank Shell Zinc Plated Throughout, including Lid, Wetted Parts and Tank Shell AIR FLUID UP TO 2.8 GAL REGULATION AGITATION 83C Single Reg No Agitation 83C-210 Double Reg No Agitation 83C-220 Single Reg Std. Agitation(D) 83C-211 Double Reg Std. Agitation(D) 83C-221 Specifications Maximum Working Pressure PSI Fluid Outlet... 3/8 NPS Air Inlet... 1/4 NPS Stainless Steel and Zinc for Waterborne Coatings Ideal for waterborne coatings when used with a disposable tank liner. 300 grade stainless steel lid and all wetted parts in lid assembly including: fluid tube, lid bushing, outlet elbow and fitting, and agitator shaft. Zinc plated tank shell. Stainless Steel Lid and Zinc Plated Tank Shell Stainless steel lid, including all wetted parts; tank shell is zinc plated AIR FLUID UP TO 2.8 GAL REGULATION AGITATION 83C Single Reg No Agitation 83Z-210 Double Reg No Agitation 83Z-220 Single Reg Std. Agitation(D) 83Z-211 Double Reg Std. Agitation(D) 83Z-221 Binks Disposable Tank Liners For 83C and 83Z Binks tanks use either the 2.8 gallon tank liner PT-78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon tank liner PT-78-K60, quantity of 60 liners. 49

10 All stainless steel tanks and lids are precison crafted of heavy gauge 304 stainless and are electropolished. All models are equipped with a bottom outlet plug. Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts. Binks stainless steel pressure tanks are designed and built to prevent corrosion-contamination, an inherent problem with waterborne coatings. For maximum cleanliness, use with Binks disposable tank liners. Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping pails. 2.8-gallon tanks accept 1-gallon pails Stainless Steel Tanks Your Best Long-Term Value Binks Stainless Steel Pressure Tanks are suitable for virtually all fluids and solvents. They are ASME certified and permanently labeled for 110 PSIG maximum working pressure. Tanks and lids are constructed of heavy gauge 304 stainless steel and are electropolished. All models are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts Specifications Maximum Working Pressure PSI Fluid Outlet, Top... 3/8 NPS Fluid Oulet Plug, Bottom... 1 NPT Air Inlet... 1/4 NPS Ideal for Waterborne Coatings Binks Stainless Steel pressure tanks are designed to prevent corrosioncontamination, an inherent problem with waterborne coatings. These tanks are all stainless steel, including fittings, and should be used with a Binks disposable liner for maximum cleanliness. Material handling components such as fluid regulators, filters and Stainless Steel Bottom outlet plug and opening in skirt standard agitators should also be of stainless steel. We also recommend you use hose and tubing connections/fittings made of stainless steel, nylon or brass. Other Considerations Waterborne coatings are shear sensitive to being stirred and pumped. Stirring and pumping can degrade some waterborne coatings. Binks pumps, however, are designed for extremely low shear characteristics. A Binks oscillating agitator is recommended for keeping pigment in suspension without degrading the material. Binks fluid regulators and filters are also recommended for their minimal low shear characteristics. Bottom Outlet Conversion Kits These fittings allow a standard top outlet tank to feed from the bottom by removing the plug in the bottom port. Available in stainless steel only. TANKS STAINLESS STEEL CAPACITY PART NO. SHIP WT. 2.8 GAL QMS LBS GAL QMS LBS GAL QMS LBS. SMALL TANK MEDIUM TANK LARGE TANK AIR FLUID UP TO 2.8 GALLONS UP TO 11.8 GALLONS* UP TO 19.8 GALLONS REGULATORS AGITATION 83S 83S 83S Single Reg No Agitation 83S S S-1510 Double Reg No Agitation 83S S S-1520 Single Reg Std. Agitation 83S-211 (D) 83S-1013 (I) 83S-1513 Double Reg Std. Agitation 83S-221 (D) 83S-1023 (I) 83S-1523 Single Reg Opt. Agitation 83S-213 (I) 83S-1016 (R) 83S When combined with the use of disposable liners, there is no more economical way to run a paint operation for most applications. For 83S-200 Binks tanks use either the 2.8 gallon tank liner PT- 78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon tank liner PT-78-K60, quantity of 60 liners. For 83S-1000 Binks tanks use the 11.8 gallon tank liner PTL-412-K8, quantity of 8 liners. For 83S-1500 Binks tanks use the 19.8 gallon tank liner PTL-415-K10, quantity of 10 liners. (D) - Direct Drive Agitator: Uses direct mount air mount and air adjusting valve. (I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for higher torque at lower speeds. (R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixing and reducing cavitation. * - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping pails. NOTE: The air regulator(s) and gauge(s) are shipped inside the tank to prevent damage in shipping.

11 Galvanized Tanks Ideal for Most Applications Galvanized steel tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. The bottom outlet is recommended for heavy, viscous materials such as emulsified asphalts, cut-back asphalts, rubber compounds, etc. Specifications Maximum Working Pressure PSI Fluid Outlet, Top... 3/8 NPS Fluid Oulet Plug, Bottom... 1 NPT Air Inlet... 1/4 NPS Spray Guns-Accessories Bottom Outlet Conversion Kits These fittings allow a standard top outlet tank to feed from the bottom by removing the plug in the bottom port. Available in stainless steel only. TANKS STAINLESS STEEL CAPACITY PART NO. SHIP WT. 2.8 GAL QMS LBS GAL QMS LBS GAL QMS LBS. Binks galvanized tanks are built to the highest quality standards. Our team of experts - engineers, designers, technicians and customer service professionals - is constantly working to bring you the quality, efficiency, performance and value you expect from one of the world s most recognized spray finishing brands. Binks galvanized tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks have ports for both bottom and top fluid outlets. All galvanized tank models are ASME certified for working pressure. Lids disassembled easily-no special tools are required-and all models are easy to service and clean. Galvanized Steel Bottom outlet plug and opening in skirt standard SMALL TANK MEDIUM TANK LARGE TANK AIR FLUID UP TO 2.8 GALLONS UP TO 11.8 GALLONS* UP TO 19.8 GALLONS REGULATORS AGITATION 83G 83G 83G Single Reg No Agitation 83G G G-1510 Double Reg No Agitation 83G G G-1520 Single Reg Std. Agitation 83G-211 (D) 83G-1013 (I) 83G-1513 Double Reg Std. Agitation 83G-221 (D) 83G-1023 (I) 83G-1523 Single Reg Opt. Agitation 83G-213 (I) 83G-1016 (R) 83G-1516 When combined with the use of disposable liners, there is no more economical way to run a paint operation for most applications. For 83G-200 Binks tanks use either the 2.8 gallon tank liner PT- 78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon tank liner PT-78-K60, quantity of 60 liners. For 83G-1000 Binks tanks use the 11.8 gallon tank liner PTL-412-K8, quantity of 8 liners. For 83G-1500 Binks tanks use the 19.8 gallon tank liner PTL-415-K10, quantity of 10 liners. (D) - Direct Drive Agitator: Uses direct mount air mount and air adjusting valve. (I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for higher torque at lower speeds. (R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixing and reducing cavitation. * - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping pails. NOTE: The air regulator(s) and gauge(s) are shipped inside the tank to prevent damage in shipping. 51

12 Indirect Air Motor Drive Standard duty, smooth running with gear reducer, 1/4 hp, 15:1 ratio, 20 to 120 RPM. Includes throttling valve, fittings, and hose for connection to air supply on tank lid. Air consumption: Approximately 6 CFM@50 RPM. Model QS For 2.8, 11.8 and 19.8 gallon tanks only. Agitator Drives Standard Model Air Motor Drive Unit with gear reducer: 1/2 H.P., 20:1 Ratio, 15 to 90 RPM output. Shipping weight 20 lbs. Part Sheet For 30 and 60 gallon tanks only. Model Oscillating Air Motor oscillations/min. 400 inch lbs. Torque at 80 psi. Shipping weight 15 lbs. Part Sheet For 30 & 60 gallon tanks only. Heavy Duty Model Tank Accessories Air Motor Drive Unit with gear reducer. 1 H.P., 30:1 Ratio, 15 to 50 RPM output. Shipping weight 20 lbs. Part Sheet For 30 & 60 gallon tanks only. Direct Drive Agitator Air-powered direct drive agitator assembly with 1/4 hp air motor and a three-bladed propeller to keep materials mixed in suspension, even high solids. Use on two gallon models. Must order air motor and shaft separately. 83Z Series Stainless Steel Model PT air motor Model PT shaft assembly 83C Series Zinc Plated Model PT air motor Model PT shaft assembly 83S and 83G Series Refer to part sheets on tank Air Regulator Assembly Kits Model QMS-436: One gauge, one regulator. Converts single regulation to dual. Model QMS-4006: One gauge, one regulator. Regulates and indicates tank pressure. Model QMS-4007: Two gauges, two regulators. Controls tank pressure and atomization air pressure to gun. Model HAR-511: Regulator only (for fluid pressure). Model HAR-507: Second regulator for tanks with one regulator. Model GA-288: Gauge only, range psi (for fluid). Model GA-333: Gauge only, range psi (for air). Premium Spray Finishing Air Hose Assemblies and Connections SIZES LENGTH HOSE ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. OF HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NO. 5/16 25 ft /4 NPS (F) three piece reusable /16 50 ft /4 NPS (F) three piece reusable /8 25 ft /4 NPS (F) three piece reusable /8 50 ft /4 NPS (F) three piece reusable Fluid All TM Fluid Hose Assemblies and Connections SIZES LENGTH HOSE ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. OF HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NO. 3/8 25 ft /8 NPS (F) three piece reusable /8 50 ft /8 NPS (F) three piece reusable Lid Gaskets GASKET 2.8 GAL 11.8 GAL GAL 2.8 GAL. 30 GAL. 60 GAL. MATERIAL GALV. OR SS GALV. OR S.S. GALV. OR S.S. P.T. TANK GALVANIZED GALVANIZED PART NO. PART NO. PART NO. PART NO. PART NO. PART NO. PART NO. Santoprene QMS-80-1 QM QM PT Thiokol Rubber Binks now offers Santoprene lid gasket in place of the standard Thiokol gasket. Injection molded of new hi-tech materials, Santoprene is highly chemical resistant. 52

13 Pumps Spray Guns-Accessories Pogo Pump Infinity Pogo Pump Specifications & Construction Lower Pump Material 316 SS Pump Rod Material 316 SS Cylinder Material Stainless Steel Packing Material UHMW Polyethylene Motor Diameter 2 Stroke 6 Air Inlet 1/4 NPT (f) Material Inlet Immersed (no Threads) Material Outlet 1/2 NPT (f) Weight 19 lbs. (8.6 kgs.) Weight (stub) 16 lbs. (7.3 kgs.) Part Numbers Air Control Bare Pump Air Motor Air Motor Repair Kit Fluid Section Stub Fluid Section Fluid Section Repair Kit Stub Bare Pump Gemini Diaphragm Pump Technical Specifications Gemini 1/2 Series Bare Pump Model Number: Body Construction: SS Filled Acetal Ground Wire: Free GPM: (7 GPM) (13 GPM) Principal Use: Multi Gun Supply/ Multi Gun Supply or Fluid Transfer Part Sheet: Specifications (Stainless) Lower Pump Material 316 SS Plunger Material 316 SS Cylinder Material Stainless Steel Packing Set UHMW Polyethylene Max. 120 o F Fluid Inlet Temp. Max. 180 o F Fluid Inlet Temp. Weight Drum 19 lbs. (8.6 kgs) Stub 16 lbs. (7.2 kgs) Part Number (Both SS Pumps) Air Motor Air Motor Repair Kit Lower Motor Assembly (821300) SS Stub Lower Pump Repair Kit (same) Optional Teflon Packing Specifications (Carbon Steel) Lower Pump Material Carbon Steel Plunger Material Carbon Steel (chrome plated) Cylinder Material Carbon Steel Packing Set UHMW Polyethylene Max. 120 o Fluid Inlet Temp. Max. 180 o F Fluid Inlet Temp. Optional Packing Weight 12 lbs. (5.4 kgs) Part Numbers (Carbon Steel) Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Repair Kit Optional Teflon Packing Recommended Accessories Air Controls Muffler Wall Mount :1 Drum Pump Carbon Steel

14 Pumps (cont ) Comet Hi-Vol (2.5:1) Pump Unit Model Number: Includes Gear Drive Agitator Air Control Drum Cover Assembly Comet Hi-Vol Pump Typical Applications: This complete package is designed for open top 55 gallon drums to be used on a multi-gun recirculating system. For short distances, add fluid hose, fluid regulator, and spray gun. For long systems, add the appropriate drops, fluid regulators and spray guns. Infinity 1/2 Diaphragm Pump Pump (SS), # (GND ACT) & # (Polypropylene) 1/2 Diaphragms Specifications Air Motor: Unbalanced Wetted Pump Material: See Chart Diaphragm Material: Teflon Seat: 316 Stainless Steel Balls (standard): 316 Stainless Steel Weight: Stainless Steel Groundable Acetal Polypropylene 14.6 lbs (6.6 kgs) 8.8 lbs (4 kgs) 7.2 lbs. (3.3 kgs) Part Numbers Air Motor Repair Kit Diaphragm Repair Kit Stainless Steel Groundable Acetal Polypropylene Ball & Seat Repair Kit Stainless Steel (Ball/Seat) Teflon (Ball) SS (Seat) Recommended Accessories Air Control Wall Mount Siphon 5 Hose with Stainer 5 Gallon Construction Part # Body Seat Ball Diaphragm SS SS SS Teflon Groundable Acetal SS SS Teflon Polyproylene SS SS Teflon Infinity 1 Diaphragm Pump Pump (SS) Specifications Air Motor: Unbalanced Wetted Pump Material: See Chart Diaphragm Material: Teflon Seat: Stainless Steel Balls (standard): Stainless Steel Weight: Aluminum: 19 lbs. (8.62 kgs) Stainless Steel: 36 lbs. (16.33 kgs) Part Numbers Air Motor Repair Kit Diaphragm Repair Kit Ball & Seat Repair Kit Stainless Steel (Ball/Seat) Teflon (Ball) SS (Seat) Recommended Accessories Air Control Wall Mount Siphon Hose 5 Hose with Stainer 5 Gallon Gallon Construction Part # Body Seat Ball Diaphragm Aluminum SS SS Teflon SS SS SS Teflon 54

15 Pumps (cont ) Spray Guns-Accessories Infinity Hi-Volume 3:1 Diaphragm Pump Pump Ratio 3:1 Specifications Air Motor: Unbalanced Wetted Pump Material: Stainless Steel Diaphragm Material: Teflon Seat: Stainless Steel Balls (standard): Stainless Steel Weight: Stainless Steel 95 lbs. (43 kgs) Part Numbers Air Motor Repair Kit Diaphragm Repair Kit Ball & Seat Repair Kit Stainless Steel (Ball/Seat) Recommended Accessories Air Control Wall Mount Infinity Hi-Volume 1-1/2 Diaphragm Pump Pump /2 Diaphragm Specifications Wetted Pump Material: Stainless Steel Diaphragm Material: Teflon Seat: Stainless Steel Balls (standard): Teflon Weight Stainless Steel: 84 lbs. (38.1 kgs) Air Motor Repair Kit: Part Numbers Diaphragm Repair Kit: Ball & Seat Repair Kit Teflon (Ball) SS (Seat) Recommended Accessories Air Control Wall Mount

16 Pump Packages Infinity Diaphragm Wall Mount Finishing Bung Mount Bunk Mount Packages include: Air Control, Mounting Plate, Mounting Hardware, and SS Siphon Tube with strainer and Fluid Regulator. Wall Mount Bulk Transfer These bulk transfer/high volume finishing pumps can efficiently transfer finishing coatings to a day tank. The 3:1 can supply large circulating systems. Both pumps are designed to handle heavy abrasive coatings. We offer 1/2 and 1 wall mount packages. All Packages include: Wall Mount Bracket, Fluid Regulator, 2 Air Controls, and Pneumatic Shut Off 1/2 Wall Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm SS SS SS Teflon 1/2 Bung Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm SS SS SS Teflon :1 Diaphragm includes: Pump Wall Bracket Air Control Construction Part # Wetted Seat Ball Diaphragm SS SS SS Teflon 1 Wall Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm SS SS SS Teflon Alum SS SS Teflon Pail Mount Pail Mount Packages include: Fluid Regulator and 2 Air Controls. Pump mounted on cover. 1/2 Pail Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm Grounded SS SS Teflon Acetal /2 Pump includes: Pump Wall Bracket Air Control Construction Part # Wetted Seat Ball Diaphragm SS SS SS Teflon 56

17 Pump Packages (cont ) Spray Guns-Accessories Infinity N Series Infinity N Series pumps are low cost, stainless steel pumps for light industrial air assist and airless applications Package Includes Pump Wall Mount Bracket Pneumatic Shut Off Valve Air Assist and Airless Part Numbers Cart Mount Pkg :1 Ratio with cycles Wall Mount Pkg :1 Ratio with cycles Wall Mount Bracket Air Controls Accessories not included Siphon Hose - 5 foot hose with strainer 5 gallon Package Includes Pump Cart Pneumatic Shut Off Valve 57

18 Pump Packages (cont ) Gemini 1/2 Diaphragm Pump Packages Gemini Pump Packages 1/2, Low Pulse PSI Package Bare Pump Wetted Ratio & GPM@ Mounting Air Suction Hose Agitator Prime Pulse/ Fluid Number Number Parts Size 60 CPM Regltrs w/bung Adapt. Valve Filter Reg acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail SS, Teflon 1:1, 1/2 NPT bung 1 NR acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail acetal, Teflon 1:1, 1/2 NPT 1.2 wall 2 55 gallon acetal, Teflon 1:1, 1/2 NPT drum cover 2 55 gallon acetal, Teflon 1:1, 1/2 NPT bung 1 NR SS, Teflon 1:1, 1/2 NPT bung 0 NR acetal, Teflon 1:1, 1/2 NPT bung 0 NR Gemini Pump Packages 1/2, Max. Flow PSI Package Bare Pump Wetted Ratio & GPM@ Mounting Air Suction Hose Agitator Prime Pulse/ Fluid Number Number Parts Size 60 CPM Regltrs. w/bung Adapt. Valve Filter Reg SS, Teflon 1:1, 1/2 NPT 2.4 wall SS, Teflon 1:1, 1/2 NPT bung 1 NR acetal, Teflon 1:1, 1/2 NPT bung 1 NR SS, Teflon 1:1, 1/2 NPT bung 0 NR acetal, Teflon 1:1, 1/2 NPT bung 0 NR Recommended Not Shown Gemini 1/2 Low Pulse Spray Outfits MODEL # SYSTEM COMPONENT LIST Item Part Description Qty. Part No. No. Sheet Mach 1 SL Gun Air Hose Ass y Fluid Hose Ass y Gemini Pump Pkg X MODEL # SYSTEM COMPONENT LIST Item Part Description Qty. Part No. No. Sheet Gun Air Hose Ass y Fluid Hose Ass y Gemini Pump Pkg X MODEL # SYSTEM COMPONENT LIST Item Part Description Qty. Part No. No. Sheet Mach 1 SL Gun Air Hose Ass y Fluid Hose Ass y Gemini Pump Pkg X General Description This (5) gallon pail system is complete with Mach 1 SL Gun w/94 x 94P set-up, 1:1 Gemini 1/2 diaphragm pump w/air control and 25 ft. fluid and air hose assemblies General Description This (5) gallon pail system is complete with 2001 Gun w/63bss x 63 PB, 1:1 Gemini 1/2 diaphragm pump w/ air control and 25 ft. fluid and air hose assemblies General Description This 55 gallon, wall mounted system comes complete with Mach 1 SL Gun w/94 x 94P set-up, 1:1 Gemini 1/2 Low Pulse diaphragm pump, air control, 25 ft. air and fluid hose and 55 gallon siphon kit. 58

19 Pump Packages (cont ) Raptor Systems (Wall & Cart Mounted) Air Assisted Airless Outfits PSI Spray Guns-Accessories Wall Mounted Outfit Model No (UHMWPE) (Teflon TM ) Wall-mount outfit is a complete finishing system for stationary installations. The small profile fits easily in tight spaces. Shipping weight 21.5 lbs. (9.8 kg.) Raptor Systems Wall mounted outfit - with gun and hoses 5 gallon (UHMWPE) packings gallon (Teflon TM ) packings gallon (UHMW) packings gallon (Teflon TM ) packings Cart mounted outfit - with gun and hoses UHMWPE packings Teflon TM packings Wall mounted package - no gun or hoses UHMWPE packings Teflon TM packings Cart mounted outfit - no gun or hoses UHMWPE packings Teflon TM packings Raptor - Pump only UHMWPE packings Teflon TM packings Shipping Weight lbs (5.7 kg) Cart Mounted Outfit Model No (UHMWPE) (Teflon TM ) Cart-mount outfit is a complete finishing system for mobile flexibility. This outfit includes pump, regulator, cart, gun filter, spray gun with tip and all standard hoses. Shipping weight 35.5 lbs. (16.1 kg.) Available Accessoires *Fluid Tip (included in outfits)... User Selects *3/16 Fluid Hose PSI (28 bar), 25, 1/4 NPS 25 Pneunatic Tubing Assembly *Ground Wire Kit *100 mesh gun filter; Fluid Regulator PSI ( bar) Pump Outlet Fluid Filter Air Motor Repair Kit Lower Pump Repair Kit UHMWPE Teflon TM Wet-Sol Plus 1 qt. Packing Lubricant System Assembly Sheet Package Part Sheet X Pump Part Sheet X Air Motor Part Sheet Fluid Section Part Sheet X * Included with outfits 59

20 Pump Packages (cont ) Vecter Spray Finishing Outfit 28:1 Air Assisted Airless Outfits PSI Infinity Pump on Cart & Infinity Pump with Wall Bracket Outfit Features 5-year pump warranty on all nonwear parts Hydraulically-assisted fluid delivery combined with HVLP air supply Maximum fluid pressure PSI Pump supplies CPM to supply tip sizes.009 to.017 Drop forged aluminum gun body, stainless steel fluid passages, nozzle and needle Outfit Benefits Stainless steel gun and pump Achieves fine finish and high efficiency Lightweight and easy to handle; gives operators superior control while fighting fatigue Works with lacquers, enamels, stains, sealers, and top coats Can spray light to heavy viscosity materials Can spray air-assist or airless For wood and metal finishing Part Numbers Infinity Pump on Cart Infinity Pump wit Wall Bracket Air Motor Repair Kit Lower Pump Repair Kit Recommended Accessories Fluid Regulator PSI Fluid Regulator PSI Pump Outlet Fluid Filter Fluid Tip (Included in Package) Air Cap HA 1/8 ErgoFlex Fluid Hose 5000 PSI, 25, 1/4 N.P.S /16 ErgoFlex Fluid Hose 4000 PSI, 25, 1/4 N.P.S Double Male Nipple, S.S /8 Pneumatic Tubing Assembly 125 PSI, 25, 1/4 N.P.T Ground Wire Part Number Cart-mounted outfit (optional hoses shown above) is a complete finishing package for mobile flexibility. This outfit included pump, air controls, cart, gun filter, spray gun with tip and all standard hoses. Shipping weight 45 lbs. Part Number Wall-mounted outfit (optional hoses shown above) is a complete finishing package for stationary applications. The small profile fits easily in tight spaces. 60

21 Pump Packages (cont ) Infinity Pogo Pump Pump # (SS Drum), # (CS Drum) # (SS Stub) - Ratio 2:1-200 PSI Spray Guns-Accessories Performance Air Inlet Pressure PSI ( bar) Fluid Pressure Range PSI ( bar) Max. Cycles/Min Displacement Per Cycle 7.2 cu. in.... (117.9 cm 3 ) 3.9 oz.... (117.9 ml).03 gal... (.117 liter) Cycles per Gallon (Liter) (8.4) 120 Cycles/Min GPM (15.8 lpm) Materials of Construction Lower Pump Material... Carbon Steel Plunger Material Carbon Steel (Chrome Plated) Cylinder Material... Carbon Steel Packing Set... UHMW Plyethylene Max 120 o F Fluid Inlet Temp. Max 180 o F Fluid Inlet Temp. Optional Packing Weight lbs. (5.4 kgs.) Materials of Construction and Noise 60 PSI db(a) Lower Pump Material Stnls. Steel Plunger Material Stnls. Steel Cylinder Material... Stainless Steel Packing Set... UHMW Polyethylene Max. 120 o F Fluid Inlet Temp. (Standard) Max. 180 o F Fluid Inlet Temp. (Optional) Weight Drum lbs. (8.6 kgs.) Stub lbs. (7.2 kgs.) Part Numbers for and (SS) Air Motor Air Motor Repair Kit Lower Pump Assembly (812300) SS Stub (812304) Lower Pump Repair Kit (same) Part Number for (Carbon Steel) Air Motor Air Motor Repair Kit Lower Pump Assembly Lower Pump Repair Kit Optional Telfon Packing Available Accessories Air Control Muffler Wall Mount or Open Drum Mount Bracket Pogo Spray Finishing Outfit Model # General Description Excellent for solvent based adhesives This (55) Gallon Bung System is complete with 2001 SS Gun w/66ss x 66SD-3 set up, 1:1 ratio supply pump with air control and 25 ft. fluid and air hose assemblies 61

22 Pump Packages (cont ) Infinity Two-Ball Pump Packages Wall Mount Package Includes Pump with UltraCoat TM Wall Mount Bracket Muffler Air Filter/Regulator Stainless Steel Material Filter Manual Fluid Pressure Relief Valve Needle Valve Accessories (Included) Wall Mount Bracket for 4-1/4 and 6 motors for 8 motors Mufflers for 4-1/4 and 6 air motors for 8 air motors Air Filter/Regulator (2) SS Fluid Filter w/100 mesh element Available Accessories* Siphon Kits 5 gallon gallon Siphon kits include 5 hose, SS fittings, tube and strainer *not included with packages Model PSI 1-4, 11:1 Ratio, 3.77 GPM Typical Applications 11:1- used in air assist airless and lowerrange airless systems with light to medium viscosity coatings. This pump can be used as a multi-gun supply pump in a circulating or a dead end system. Bare pump # Model PSI 1-4, 22:1 Ratio, 1.9 GPM Typical Applications 22:1 - used in air assist airless and midrange airless systems with light to medium viscosity coatings. This pump can also be used in a circulating system or a dead end system. Bare pump # Model PSI 1-6, 23:1 Ratio, 3.77 GPM Typical Applications 23:1 - used in air assist airless and midrange airless systems with light to medium viscosity coatings. This pump can be used as a multi-gun supply pump in a circulating or a dead end system. Bare pump # Model PSI 1-8, 40:1 Ratio, 3.77 GPM Typical Applications 40:1 - used in high-pressure systems with light, medium or high viscosity coatings. Typically an airless pump, can also supply air assisted airless. This pump can also be used in multi-gun circulating or a dead end system. Bare pump # Model PSI 1-6, 45:1 Ratio, 1.9 GPM Typical Applications 45:1 - used in high-pressure systems with light, medium or high viscosity coatings. Typically an airless pump, can also supply air assisted airless. This pump can also be used in a circulating system or a dead end system. Bare pump # Model PSI 1-4, 30:1 Ratio, 1.5 GPM Typical Applications 30:1 - used in air assist airless and mid-high range airless systems with light, medium and high viscosity coatings. This pump can also be used in a circulating system or a dead end system. Bare pump #

23 Finishing Systems/Packages Spray Guns-Accessories HVLP Conversion Outfits Model PD Pro Finish Outfit Consists Of P Mach 1 Gun h.p. Oiless Air Compressor 83Z Gallon ASME PT Tank Air Hose Assembly (Compressor to Tank) Air Hose Assembly (Tank to Gun) Fluid Hose Assembly (Tank to Gun) Model A one-quart starter outfit without compressor. For touch-ups and small to medium jobs by contractors, cabinet makers, and wood finishers who have existing compressors (1.5 H.P. Minimum Req d) Mach 1 Conversion 1 Quart HVLP Outfit with 94 x 90P nozzle /16 Air Hose Assembly Air Regulator w/gauge Model Same as except with M1-G Gravity Spray Gun with stand Vecter Spray Finishing Outfit Infinity Pump on Cart Infinity Pump with Wall Bracket Air Motor Repair Kit Lower Pump Repair Kit Fluid Tip (included in pkg.) Conventional Air Spray Outfits Model Binks Steadi-Grip outfit. External mix nozzles for enamels, primers, polyurethane. Includes standard 2001 gun with 63BSS-63PB, 5 ft. of air and fluid hose, air regulator valve and pressure cup. Optional nozzles are available. HVLP Touch Up Outfits Model Outfit Consists of P Mach 1 Gun Quart Pressure Assisted Stainless Steel Cup Model Outfit Consists of Mach 1 Gun Air Hose Assembly (hose not shown) Air Regulator with Gauge Raptor Spray Finishing System Wall mounted unit complete with gun and hoses UHMWPE packings Teflon packings Cart mounted unit complete with gun and hoses UHMWPE packings Teflon packings Wall mounted unit - no gun or hoses UHMWPE packings Teflon packings Cart mounted unit - no gun or hoses UHMWPE packings Teflon packings Raptor - Pump Only UHMWPE packings Teflon packings 12.6 lbs. Shipping Weight 63

24 Drum Covers and Agitators 55 Gallon Drum Cover 5 Gallon Pail Cover Drum Covers Part No. Container Description Shipping Wt. Lbs * 5 Carbon Steel Pail Cover for Comet 3C & 4B ** 55 Carbon Steel Drum Cover for Comet 3C & 4B, Hi-Vol Carbon Steel Pail Cover for 5 Gal. Agitator & Siphon Tube Only Carbon Steel Drum Cover for 55 Gal. Agitator & Siphon Tube Only 24 * with mounting holes for: Pump, Air Control, Agitator and Filter ** For use with Hi-Vol adapter required. Direct Drive Agitator w/cover Part Direct Drive Agitator Direct Drive Agitator w/cover Part Gear Reduced Drive Agitator w/cover Part Direct Drive Agitator Elevator Part # For lifting 55 gallon cover-mounted pump units. Shipping Wt lbs. Part Sheet Ref Gear Reduced Drive Agitator Direct Drive Agitator (only) Direct Drive Agitator w/cover Includes: Cover & Agitator Container Size Gallon Motor Specifications Air Motor Model... Direct H.P.... 1/4 CFM Shaft Specifications Material... Stainless Steel Mount... Flange Diameter in. (mm)... 5/8 (190.5 mm) Max. Speed RPM Propeller Specifications Number of Propellers... 2 Diameter (in.) /8 Material... Stainless Steel Cover Material...Carbon Steel Part Sheet Ref Direct Drive Agitator (only) Direct Drive Agitator w/cover Includes: Cover & Agitator Container Size... 5 Gallon Motor Specifications Air Motor Model... Direct H.P.... 1/4 CFM Shaft Specifications Material... Stainless Steel Mount... Flange Diameter in. (mm)...3/8 (114.3 mm) Max. Speed RPM Propeller Specifications Number of Propellers... 1 Diameter (in.)... 3 Material... Stainless Steel Cover Material... Carbon Steel Part Sheet Ref Agitator (only) Agitator w/cover Includes: Cover & Agitator Container Size Gallon Motor Specifications Air Motor Model... Gear Gear Ratio... 20:1 Reduction H.P... 1/4 CFM Shaft Specifications Material... Stainless Steel Mount... Flange Diameter in. (mm)...7/8 (266.7 mm) Speed Range RPM Propeller Specifications Number of Propellers... 2 Diameter (in.) /2 Material... Stainless Steel Cover Material... Carbon Steel Part Sheet Ref

25 Fluid Regulators Downstream Medium Flow Body/ Regulated Working Maximum Model Ball & Seat Pressure Range Pressure with Gauge Inlet Pressure Number (see code at bottom) PSI (bar) PSI (bar) PSI (bar) Low Pressure (with gauge) Spray Guns-Accessories 1/4 ports, medium pressure to 1 GPM (3.785 liters) S/S, T/C S/S, T/C /8 ports, medium pressure to 3 GPM (11.4 liters) S/S, T/C ( ) 3000 (204) S/S, T/C (59-207) 6000 (408) Downstream High Flow Body/ Regulated Working Maximum Model Ball & Seat Pressure Range Pressure with Gauge Inlet Pressure Number (see code at bottom) PSI (bar) PSI (bar) PSI (bar) 3/8 ports, high pressure to 6 GPM (22.7 liters) S/S, T/C (7-55) 1000 (69) 1250 (85) S/S, T/C Back Pressure Models Base Regulated Working Maximum Model Housing Seat Pressure Range Pressure with Gauge Inlet Pressure Number (see code at bottom) PSI (bar) PSI (bar) PSI (bar) 1/4 ports, medium pressure regulator T/C T/C /8 ports, high-flow to 6 GPM (22.7 liters) S/S, T/C (0-14) 200 (14) 200 (14) S/S, T/C (0-14) 800 (55) 800 (55) S/S, T/C /2 port, low shear to 1 GPM (3.78 liters) S/S, S/S (0-14) 200(14) 200(14) Optional Gauges Rear Mount (3000 PSI) (3000 PSI) (1000 PSI) (200 PSI) High Pressure (without gauge) (with Gauge) 3/4 ports, high-flow to 11 GPM (41.6 liters) S/S, S/S Optional Gauge: PSI Ga 1 1/4 ports, system-flow** to 18.5 GPM (701 liters) S/S, T/C (0-14) 200(14) 200(14) Material codes T/C Tungsten Carbide S/S Stainless Steel (without Gauge) **Flow rates tested in 55 CPS Material 65

26 HVLP Conversion Accessories HVLP Conversion Outfits (converts from HVLP to conventional airspray to electrostatic... all with simple optional accessories) Mix or match the following components to provide all the equipment contractors need. For maximum performance, please consult your Distributor or Binks Finishing Specialist when replacing or designing any HLVP outfit. Model h.p. compressor Model quart SS cup assembly Zinc-Coated 2.8 Gallon ASME PT Tanks Model 83Z-220 Durable, economic tanks that can handle up to 80 PSIG. Made of heavy-gauge steel, coated on the inside and outside with zinc plating and chromate dip. Thiokol gaskets. Pressure Tank: Model 83Z-220 Agitator Drive: None Air Control: Model Regulators: Quantity 2 Shipping Wt. (lbs): 30 Part Sheet: 1458 Model Ideal for small batch production spraying (2 qt. capacity) Model SG2 Cup Liners Includes 12 plastic liners for easy clean-up. Air Nozzle Test Gauge Model Regulator Pressure Tank Liners Save clean-up time and solvent costs with these disposable polyethylene liners. Use liners with all systems. Carton of 80 Liners for 2.8 Gallons ASME PT Tanks Part Number Description HA & 93HA Nozzle (Mach 3SL) Series & 97 Series Liners AS & 97AS Nozzles (Siphon) S, 2P Cub Gun P Nozzle Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free to order MAIL your order Gravois Rd. St. Louis, MO FAX your order your order info@fluidair.com WEBSITE Visit our site and link to for on-line ordering 66

27 Spray Gun Accessories Spray Guns-Accessories Part Number Air Controller For air inlet at-the-gun mounting to give convenient, immediate pressure reading and correction. Anodized aluminum body is fitted with: 1/4 NPS (f) swivel connection for 360 o variable position 1/4 NPS (m) thread Pressure adjusting knob and pressure gauge. Part Sheet: 2142 Fluid Strainer Assemblies In-line cartridge filter. Part Number (100 mesh) Part Number (150 mesh) Shipping Weight 1 lb. In-Line Cartridge Filter Fluid Circulating Connections Part Number: (stainless) Use for Spray Gun Models 95 and 2001 in circulating and heated fluid systems. 3/8 NPS (m) connection. Shipping weight 14 oz. Spray Gun Extensions Air Metering Valve Assemblies Part Number: Type: 90 o Thread: 1/4 NPS (f) 1/4 NPS (m) For Mach 1 and Mach 1A spray guns only. Part Number o angle head, Part Sheet 2635 Part Number o angle head, Part Sheet 2635 In-line Cartridge Filter* Cartridge Replacement Mesh Filter Screen Assembly Shipping Weight 14 oz. 4 oz. * Also adaptable to fluid lines from spray guns Fluid Inlet Tube Extension (less fluid stainer) Part Number: Brings air and fluid hoses together at the base of the spray gun. Use for Spray Gun Models 95, 95SL and /8 NPS (m) connection. Shipping weight 8 oz. For hard to reach location. Attach to Spray Gun Models 95 and For conventional coatings. Air inlet 1/4 NPS (m) Fluid inlet 3/8 NPS (m) Length Part Shipping Act in Feet No. Wt. Wt. (lbs.) (lbs.) /4 4 Gunner s Mate (spray gun lubricant) Part Number: One case of (20) two-ounce Gunner s Mate bottles. Part Number: Two ounce bottle of Gunner s Mate. 67

28 Spray Gun Accessories 45 & 90 Deg. Angle Heads Extensions For MACH 1 and MACH 1A spray guns only. Part Number degree angle head Part Sheet: 2635 Part Number degree angle head Part Sheet: Note: Extensions may be joined together for added length. Specify new needle length. Extensions are sold less air cap and fluid nozzles. Specify spray gun model that will be used with the extension. Siphon Hoses and Ball Valves Construction Part Number Description Tube Fittings W/PSI 5 Gallon 55 Gallon Siphon siphon hose w/16 wand (3/4) Nylon SS X siphon hose w/36 wand (3/4) Nylon SS X /2 siphon hose w/16 wand Nylon SS X Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free to order MAIL your order Gravois Rd. St. Louis, MO FAX your order your order info@fluidair.com WEBSITE Visit our site and link to for on-line ordering 68

29 Accessories for Air Control Equipment Model Model Model Low Medium & High Part No. Size Pressure (PSI) Thread / /4 NPS (m) 1/4 NPT (m) / /8 NPS (m) 3/8 NPT (m) / /4 NPS (m) 1/4 NPT (m) / /8 NPS (m) 3/8 NPT (m) / /4 NPS (m) 1/4 NPT (m) / /8 NPS (m) 3/8 NPT (m) * 3/ /4 NPS (m) 1/4 NPT (m) * 3/ /8 NPS (m) 3/8 NPT (m) / /4 NPT (f) 3/4 NPT (f) *Stainless Steel Ball Valve Replacement seal (pack of 5) Binks Automatic Drains Medium & High Fits all Binks oil and water extractors, coalescers, and dryers. Merely remove the drain screw and replace it with the Binks automatic drain and furnished nipple. Oil, water, sludge and other contaminants draining from the compressed Model air line will be trapped in the bowl. The accumulation of liquid in the bowl causes the drain float to rise. This action admits bowl air pressure into a piston chamber which, in turn, opens a bleed valve and allows the liquid in the bowl to be expelled under pressure. When the liquid level drops sufficiently, the float closes and draining stops. The adaptive nipple with fit 1/8 NPT pipe or 3/8-27 machine threads. This makes field conversions simple. Part Sheet 2453 For Repair Kit, order Part No For 3 Drain Hose, order Part No DM Nipple and Drain Hose Model Capacity: 40 CFM,0-150 PSIG 1.13 M 3 /Min, BAR Inlet: 3/8 NPT (f) Three regulated outlets: 1/4 NPT (f) Part Sheet 1787 Weight: 2-1/2 lbs., 1.13 kg. Model Capacity: 40 CFM,0-150 PSIG 1.13 M 3 /Min, BAR Inlet: 3/8 NPT (f) Two main line pressure outlets: 1/4 NPT (f) Two regulated outlets: 1/4 NPT (f) & 3/8 NPT (f) Part Sheet 1787 Weight: 2-1/2 lbs., 1.13 kg. Model Capacity: 100 CFM,0-150 PSIG 2.83 M 3 /Min, BAR Inlet: 1/2 NPT (f) Three regulated outlets: one 1/2 NPT (f) two 1/4 NPT (f) Part Sheet 1787 Weight: 3-1/2 lbs., 1.59 kg. Binks Pressure Gauges Easy to read dials for positive, accurate and continuous measure of air pressure. Quick, simple installation. Air models have fit 1/4 Model NPT (m) inlet connection. Nine models are available (two with back inlets). Shipping weight 1 lb. each. Model Range Range Number (PSI) (BAR) ** ** With Back Inlet 69

30 Cartridge Respirators Superior Protection against Organic Vapors, Fumes, Dusts and Mists Millennium Premium Paint Spray Respirator Breathe easier with the Binks Millennium a premium charcoal filter respirator. Ready-to-use right out of the box, the Millennium 3000 combines superior comfort with the fit, durability and protection of a conventional half-mask respirator. Designed with finishing professionals in mind, the Millennium 3000 features: Heavy duty silicone and metal face-piece for increased durability and comfort Adjustable, heavy duty straps and head band Maximum serviceability - fully serviceable with a Binks Tune-Up Kit Extended life - withstands repeated cleanings and exposure to paints and solvents without deterioration. Millennium Classic Paint Spray Respirator For economical protection against organic vapors, fumes, dusts, and mists, try the Binks Millennium a value-priced charcoal respirator. Ready-to-use right out of the box, the Millennium 2000 provides the fit and comfort of a traditional respirator and protection from paints and solvents. An oil-resistant pre-filter (Part # ) is also available. The value-priced Millennium 2000 is a good choice when convenience and value are important considerations. Both the Binks Millennium 3000 and Millennium 2000 Respirators meet 42 CFR Part 84 Standards. Binks Tech Tip... When should cartridges and filters be replaced? The service life of cartridges and filter depends on several factors including breathing rate/volume, concentration of contaminants, temperature and humidity. Replace chemical cartridges when you detect odor or taste of vapors, or when you experience eye, nose or throat irritation. Replace pre-filters or filters when you experience increased resistance to breathing. WARNING! Binks Millennium paint spray respirators are not to be used with urethane paints or other paints containing di-isocyanates. Di-isocyanates have a low odor threshold and are not easily detectable by smell. A dangerous level of di-isocyanates can break through a charcoal filter cartridge before the user is able to smell it. Painters using such paints must use an air-supplied respirator. 70

31 Understanding Pressure Drop Pressure Drop Basics Understanding pressure drop requires a basic knowledge of CFM (cubic feet per minute) and psi (pounds per square inch). CFM refers to the given volume of air that flows past a given point in one minute. PSI is the amount of force pushing the cubic foot of air through the hose or tool. The amount of air that a toll consumes all remain constant for a given set of conditions. Pressure will always drop when the tool is turned on and when the air begins to flow through the hose. In addition, pressure drop will vary in relation to any adjustment made on the tool. The same pressure loss principles apply when moving fluid through a hose. Be sure to consider pressure loss when choosing fluid hose and fittings. Flow of free air in cubic feet per minute Pressure Drop Chart Pressure Drop Points Losses in pressure (psi) are dependent on the variables of hose length, hose diameter, volume (cfm), and the number and design of quick disconnects. To minimize the effects of pressure drop and the resulting lack of volume, consider the following. Frictional resistance between the fluid and the walls of the hose. Internal resistance (shear) - fluid moves faster through the center of the hose and slower against the walls. Change in direction of air or fluid through the system. Volume at any given time as determined by back pressure. The number of system connection, adapters, nipples, valves, filters and air and fluid controls. Hose I.D. - use the minimum I.D. necessary for each application Hose length - pressure drop is proportional to hose length Surface of the hose s inner tube - a rough surface can increase pressure drop up to 50%. Technical Data Pressure drop in ounds per sq. in., per 100 ft. of hose To determine pressure drops fo hose lengths other than 100 (Pressure Dropper Chart Figure) x (Ft. of Hose) = Pressure drop for hose used 100 This chart is for approximating and should only serve as a guide in sizing air hose. Pressure drops are directly proportional to hose lenghts. That means that if hose length doubles, for example, pressure drop doubles. Example: 100 x 1/2 I.D. hose at 40 cfm has a pressure loss of 17 1/2 psi. 200 x 1/2 I.D. will lose 35 psi 50 x 1/2 I.D. will lose between 8 to 9 psi. 71

32 Premium Spray Finishing Air Hose Smooth Cover Recommended Use Premium spray finishing air hose. Highest oil resistance rating -- Class A. Designed for all finishing operations as well as rugged industrial applications, especially applications requiring lubricants in the airline supply or where oil and grease are present in the environment. Excellent for use with water and water-based materials. Temperature range from -20oF to +200oF(max). Tube Nitrile Rubber (Buna-N) Class A oil resistance Reinforcement High tensile strength rayon braid and spiral reinforcement. Specially designed for maximum flexibility (under pressure) and maximum coupling retention. Cover Neoprene, red, smooth. Abrasion resistant. Class A oil resistance Connections Three-piece, plated brass, reusable. I.D. Sizes 1/4, 5/16, 3/8, 1/2 and 3/4 Smooth Cover. Bulk Hose Chart - Smooth Cover STD. REEL MAXIMUM LENGTH IN FT. SHIPPING WGT. SIZES AVAILABLE BULK HOSE WORKING BEND PLUS OR MINUS BASED ON AVG. HOSE WEIGHT I.D. O.D NUMBER PRESSURE (PSI) RADIUS 50 FT. FEET PER REEL PER 100 FEET 1/4 1/ / lbs 10 lbs. 5/16 5/ lbs lbs. 3/8 11/ / lbs. 18 lbs. 1/2 7/ lbs lbs. 3/4 1 1/ lbs. 35 lbs. Hose Assemblies and Connections HOSE SIZES AVAILALBE LENGTH OF ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NUMBER 1/4 5 ft /4 NPS (f) three piece reusable /4 25 ft /4 NPS (f) three piece reusable /4 50 ft /4 NPS (f) three piece reusable /16 5 ft /4 NPS (f) three piece reusable /16 25 ft /4 NPS (f) three piece reusable /16 50 ft /4 NPS (f) three piece reusable /8 25 ft /4 NPS (f) three piece reusable /8 50 ft /4 NPS (f) three piece reusable Reusable Connections 72

33 Fluidall TM Fluid Hose Nylon Lined, Maximum Versatility Spray Guns-Accessories Recommended Use Premium, versatile fluid hose, for finishing operations plus a wide range of fluid applications. FluidallTM is ideal for resins and solvents contained in latices, spoxies, urethanes, alkyds, primers, acrylics, polyesters, silicones, bitumastic coatings, oil and water based paints, lacquers, alcohol and latex coatings. Temperature range from -30 o F to +160 o F (max). Tube Nylon. Reinforcement High tensile rayon braid. Specially designed for maximum flexibility (under pressure) and maximum coupling retention. Cover Neoprene, black, smooth. Abrasion resistance. Class A - Oil Resistance. Connections Three-piece, plated brass, reusable. I.D. Sizes 1/4, 3/8, 1/2, 3/4 and 1 Bulk Hose Chart - Smooth Cover STD. REEL MAXIMUM LENGTH IN FT. SHIPPING WGT. SIZES AVAILABLE BULK HOSE WORKING BEND PLUS OR MINUS BASED ON AVG. HOSE WEIGHT I.D. O.D NUMBER PRESSURE (PSI) RADIUS 50 FT. FEET PER REEL PER 100 FEET 1/4 1/ lbs 8 lbs. 3/8 11/ / lbs. 15 lbs. 1/2 7/ lbs. 22 lbs. 3/4 1 3/ lbs. 36 lbs. 1 11/ lbs. 53 lbs. Hose Assemblies and Connections HOSE SIZES AVAILALBELENGTH OF ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. HOSE PART NO. NUMBER THREAD SIZE CONNECTIONPART NUMBER 1/4 5 ft /8 NPS (f) three piece reusable /4 25 ft /8 NPS (f) three piece reusable /4 50 ft /8 NPS (f) three piece reusable /8 5 ft /8 NPS (f) three piece reusable /8 25 ft /8 NPS (f) three piece reusable /8 50 ft /8 NPS (f) three piece reusable /2 25 ft /2 NPS (f) three piece reusable /2 50 ft /2 NPS (f) three piece reusable Reusable Connections 73

34 Specialized Hose Assemblies Premium Airless Paint Spray Hose Conductive -- No Wire Recommended Use High pressure paint spray applications, including electrical airless. Compatible with a wide range of materials, solvents and water based coatings. Designed for the most durable and extended service. Temperature range -40 o F to +180 o F. Tube Nylon - this no-wire hose incorporates a nylon core tube with a conductive polymer surrounding it. Electrical conductivity will remain throughout the hose life. Reinforcement High tensile nylon braid reinforcement. Cover Polyurethane, white or yellow depdning on hose I.D. Connections Permanently attached, plated steel with spring guards. I.D. Sizes 3/16, 1/4, 5/16, and 3/8. Specifications RATED BEND LBS./ I.D. O.D. W.P. RADIUS 100 FT. 3/ PSI 1 1/ / PSI 1 1/ / PSI 1 1/ / PSI 2 1/ Hose Assemblies and Connections JACKET SIZES LENGTH ASSEMBLY CONNECTION TYPE OF COLOR I.D. OF HOSE PART NO. THREAD SIZE CONNECTION 3/16 30 whip end * 1/4 NPS (f) permanent 3/16 5 ft /4 NPS (f) permanent 3/16 25 ft /4 NPS (f) permanent 1/4 15 ft /4 NPS (f) permanent 1/4 25 ft /4 NPS (f) permanent 1/4 50 ft /4 NPS (f) permanent 5/16 25 ft /4 NPS (f) permanent 5/16 50 ft /4 NPS (f) permanent 3/8 5 ft /8 NPS (f) permanent 3/8 10 ft /8 NPS (f) permanent 3/8 50 ft /8 NPS (f) permanent 3/8 100 ft /8 NPS (f) permanent Yellow Jacket color; White Jacket color * Connection Thread = 1/4 NPS (f) x 1/4 NPT (m) w/30 deg. seat. Hose connector , 1/4 NPS(m) x 1/4 NPS(m) for connecting hose assemblies together. Bulk hose not available - assemblies only. Yellow Jacket color White Jacket color 74

35 Specialized Hose Assemblies Contractor Quality Airless Paint Spray Hose Conductive -- No Wire Spray Guns-Accessories Recommended Use Designed specifically for commercial and industrial painting contractors and heavy work load applications. Excellent flexibility and durability. For use with both solvent and water-based coatings. Tube Nylon. Reinforcement and Cover Consists of a seamless extruded synthetic braid reinforcement ad a pinpricked polyurethane cover. The innermost braid layer is chemically bonded to the innertube and the outer layer is chemically bonded to the cover. A static drain element consisting of flexible electrically conductive plastic tape is located between the braid layers. Cover-black. Operating temperature from 0 o F to +200 o F. SIZES LENGTH ASSEMBLY CONNECTION TYPE OF I.D. OF HOSE PART NO. THREAD SIZE CONNECTION 1/4 25 ft /4 NPS (f) permanent 1/4 50 ft /4 NPS (f) permanent Working pressure 3,300 PSI. Burst pressure 13, 200 PSI Hose connector , 1/4 NPS(m) x 1/4 NPS(m) for connecting hose assemblies together. Connections Permanently attached, plated steel with spring guards. I.D. Sizes 1/4. 75

36 Tubing Nylon, Polyethylene, Teflon and Reusable Connections Nylon Recommended Service Moderate pressure service for conveying enamels, lacquers, and other finishes. (Solvent-resistant nylon tubing.) Also suitable for amine catalysts in foam coating applications. May be used as an air hose (low pressure) in larger sizes shown. CONNECTIONS RATED WORKING LBS. BULK SOLID SOLID SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL HOSE SIZE PRESSURE (PSI) 100 SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD PART NO. THREAD PART NO. I.D. O.D. 70 O F 150 O F FEET 1/ /8 NPT(m) /4 NPS(f) /8 NPS(f) * 9/16-20(f) 1/ / /4 NPS(f) /8 NPS(f) / /4 NPS(f) /8 NPS(f) * 1/4 NPS(f) / /8 NPT(m) /4 NPS(f) /8 NPS(f) /16-20(f) / /4 NPS(f) /8 NPS(f) /4 NPS(f) * 3/8 NPS(f) * 1/4 NPS(f) /8 NPS(f) / /4 NPS(f) * 3/8 NPS(f) /16-20(f) / /8 NPS(f) * Connections: Reusable, plated brass, with spring guard All nylon tubing sold in bulk only ft. -Reusable, stainless, with spring guard Flexible nylon tubing, translucent, no reinforcement *Reusable, stainless swivel nut and tailpiece Polyethylene Recommended Service Low pressure air and fluid service. Suitable for conveying water-based paints and catalyst, and for polyester, lacquer and fine finishes CONNECTIONS BULK SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL HOSE SIZE RATED LBS./100 SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD I.D. WALL W.P.,PSI FEET 1/ /4 NPS(f) /8 NPS(f) /16-20(f) 1/4 NPS(f) * 3/8 NPS(f) * 9/16-20(f) 1/4 1/ /8 NPS(f) Connections: *Reusable, plated brass, with spring guard Polyethylene tubing sold per foot - no specific box size Stainless steel swivel nut and tailpiece Flexible polyethylene tubing, translucent, no reinforcement Teflon, Fluid Tubing CONNECTIONS BULK SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD 1/ /4 NPS(f) /8 NPS(f) / /4 NPS(f) /8 NPS(f) / /4 NPS(f) /8 NPS(f) /16-20(f) 1/4 NPS(f) * 3/8 NPS(f) * 9/16-20(f) 3/ /8 NPS(f) /4 NPS(f) /8 NPS(f) /16-20(f) SPECIFICATIONS BULK HOSE HOSE SIZE RATED W.P. LBS./100 TUBING NO. I.D O.D PSI FEET /4 3/ /16 5/ /8 1/ /8 1/ *Furnished with spring guard. Stainless steel swivel nut and tailpiece. Teflon tubing sold per foot - no specific box size 76

37 Hose/Tube Accessories Spray Guns-Accessories Model Medium & High Medium & High Model Model Low & High Pressure Ball Valves Low 72 Series Quick Disconnect (Body and Stem Assembly) High Pressure Manifolds PART NO. SIZE PRESSURE (PSI) THREAD / /4 NPS(m) 1/4 NPT(m) / /8 NPT(m) 1/4 NPS(m) / /8 NPS(m) 3/8 NPT(m) / /4 NPS(m) 1/4 NPT(m) / /8 NPS(m) 3/8 NPT(m) / /4 NPS(m) 1/4 NPT(m) / /8 NPS(m) 3/8 NPT(m) * 3/ /4 NPS(m) 1/4 NPT(m) * 3/ /8 NPS(m) 3/8 NPT(m) / /4 NPT(f) 3/4 NPT(f) * 3/ /4 NPT(f) 3/4 NPT(f) PART NO. DESCRIPTION THREAD Stem Assembly Only 3/8 NPS(f) Body Assembly Only 3/8 NPS(m) Body & Stem Assembly 3/8 NPS(m) X 3/8 NPS(f) *Stainless Steel Ball Valve replacement seal (pack of 5) Part No (Stem Only) Part No (Body Only) Stainless Steel Low Pressure Manifolds PART NO. PLATED STAINLESS BRASS STEEL THREADS SWIVEL NUT (2) 3/8 NPS(m) 3/8 NPS(f) * - (2) 1/4 NPS(m) 1/4 NPS(f) (2) 1/4 NPS(m) 3/8 NPS *Plated brass threads, plated steel body and swivel nut Steel or Brass, Body (plated Plated Brass Threads Low Pressure Air Quick Disconnects PART NO. DESCRIPTIONS THREAD Stem Assembly Only 1/4 NPS(f) /4 NPT(m) Body Assembly Only 1/4 NPS(m) /16 ID Hose /4 NPT(f) Body & Stem Assembly 1/4 NPS(m) X 1/4 NPT(m) /4 NPT(f) X 1/4 NPT(m) /4 NPS(m) X 1/4 NPS (f) High Pressure Manifolds PART NO. INLET OUTLET /4 NPS(f) (2) 1/4 NPS(m) /4 NPS(f) (3) 1/4 NPS(m) Note: Outlets include H.P. Ball Valves with connection thread as indicated. Plated Steel 77