CLIP top BLUMOTION CRISTALLO. Technical data sheet.

Transcription

1 Technical data sheet

2 Order specification for glass and mirror doors dhesion plate is glued on to the front (no glass drilling necessary) Tool-free hinge to adhesion plate assembly with integrated BLUMOTION (and deactivation option) with or without closing mechanism (spring) 110 opening angle 3-dimensional front adjustment Tool-free front to cabinet assembly and removal 0-protrusion: Position of front at opening angle 110 Overlay application, dual application, inset application The different overlay applications can be achieved with the appropriate adhesion positions. 110 Spring Disclaimer of liability With spring Unsprung ONS Nickel plated Onyx black adhesion plate 71B4500C 71T4500C 70T4500CTL If the Blum fittings are installed according to instructions and on suitable glass and mirror fronts, they will meet the requirements concerning the stability of the connection. This is monitored through internal and external testing. s the adhesive and/or the adhesive process are beyond our control, Blum cannot accept liability for claims arising from the failure or malfunction of this/these process/es. Front material It is recommended that the adhesive be applied by an experienced glass manufacturer. Mirror Special nickel plated arm cover cap Print/Stamp Logo Plain Stamped Blum BP Opening angle stop Opening angle 85 9 Dark grey R7037 dust grey 70T T

3 Planning dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm) Front protrusion at 90 opening angle Overlay application Dual application Inset application max 5.5 max 5.5 max F 3- F 3- Cabinet front edge to centre of mounting plate drilling Cabinet front edge to centre of mounting plate drilling Cabinet front edge to centre of mounting plate drilling 0 mm with mounting plate 0 0 mm with mounting plate 0 mm front thickn. FD with mounting plate 0 F 37 mm with mounting plate 37 F 37 mm with mounting plate mm front thickn. FD with mounting plate 37 MD Front Overlay in mm (F) in relation to Distance K Front Overlay in mm (F) MD Mounting plate spacing (mm) Due to the risk of breakage to glass and mirror doors, sufficient gaps are required on all four edges (recommendation: min. mm). Distance K djustment KT= min 0 max.5 F K Distance K KT dhesion plate distance max. ±3.0 mm ±.0 mm 3.0 mm See mounting plates.0 mm K = F mm Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors. ssembly Removal 1 3

4 Order specification Glass display cabinets for glass display cabinets Mounting/adhesion plate is glued on (no glass drilling necessary) with integrated BLUMOTION (and deactivation option) with or without closing mechanism (spring) 110 opening angle 3-dimensional front adjustment Tool-free front to cabinet assembly and removal Inset application Disclaimer of liability Spring B4500C If the Blum fittings are installed according to instructions and on suitable glass and mirror fronts, they will meet the requirements concerning the stability of the connection. This is monitored through internal and external testing. With spring Unsprung ONS Nickel plated Onyx black adhesion plate 71T4500C 70T4500CTL s the adhesive and/or the adhesive process are beyond our control, Blum cannot accept liability for claims arising from the failure or malfunction of this/these process/es. It is recommended that the adhesive be applied by an experienced glass manufacturer. Front material Mirror Special nickel plated mounting plate Front material 175M4C0N arm cover cap Print/Stamp Logo Plain Stamped Blum BP Opening angle stop Opening angle 85 9 Dark grey R7037 dust grey 70T T

5 Planning Glass display cabinets dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm) Inset application max KT FD = 3- F = min.5 FD F KT Front thickness Gap dhesion plate distance dhesion plate distance F Gap FD Front thickness KT dhesion plate distance KT = 5.5 mm F = FD 4.5 mm djustment Max. ±.0 mm ±.0 mm 3.0 mm.0 mm Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors. ssembly Removal 1 5

6 Order specification Bathroom mirror cabinets with fronts that protrude all the way around Mounting plate is glued on to the front hole on the cabinet with integrated BLUMOTION (and deactivation option) without closing mechanism (spring) Opening angle 95 3-dimensional front adjustment Tool-free front to cabinet assembly and removal With INSERT tool-free hinge to door assembly with double cranked hinge arm Chipboard screw INSERT Spring Ø (mm) Length (mm) With spring Unsprung Nickel plated 71B Screw-on Spring mounting plate Front material 71B T9750.TL 175M4C0N Disclaimer of liability If the Blum fittings are installed according to instructions and on suitable glass and mirror fronts, they will meet the requirements concerning the stability of the connection. This is monitored through internal and external testing. s the adhesive and/or the adhesive process are beyond our control, Blum cannot accept liability for claims arising from the failure or malfunction of this/these process/es. It is recommended that the adhesive be applied by an experienced glass manufacturer. arm cover cap Print/Stamp Logo Plain Stamped Blum BP boss cover cap 70T T1504 Only recommended for wall cabinets due to lower load bearing limits!

7 Planning Bathroom mirror cabinets with fronts that protrude all the way around dimensions and gap calculation based on factory setting (mounting plate 175M4C0N) with double cranked arm (5) F F5 F Distance K F 30. F F = max. 70 mm = F 4.5 mm djustment Max. ±.0 mm.0 mm ±.0 mm -3.0 mm Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors. ssembly Removal 7

8 Order specification ngled application for glass and mirror doors dhesion plate is glued on to the front (no glass drilling necessary) Tool-free hinge to adhesion plate assembly with integrated BLUMOTION (and deactivation option) with or without closing mechanism (spring) 110 opening angle 3-dimensional front adjustment Tool-free front to cabinet assembly and removal Page instructions W ngle ngle W W angled application 110 Spring arm cover cap 71B4500C 71T4500C Print/Stamp Logo With spring Unsprung Nickel plated 70T4500CTL Plain Stamped Blum BP adhesion plate Disclaimer of liability Front material Mirror Special nickel plated If the Blum fittings are installed according to instructions and on suitable glass and mirror fronts, they will meet the requirements concerning the stability of the connection. This is monitored through internal and external testing. s the adhesive and/or the adhesive process are beyond our control, Blum cannot accept liability for claims arising from the failure or malfunction of this/these process/es. It is recommended that the adhesive be applied by an experienced glass manufacturer. These dimensions are based on a factory setting of 19mm side panels. The overlay application changes in cases of variance. trial application is recommended. The fixing position of the mounting plate can be different from the standard fixing position max max max Description Mounting plate ngled spacer Spacing (mm) Description Spacing (mm) Description Spacing (mm) 0 173H x ngled spacer 5 1 x ngled spacer 5 1 x

9 Planning ngled application max max max Description Mounting plate ngled spacer Spacing (mm) Description Spacing (mm) Description Spacing (mm) 0 173H x ngled spacer 5 x ngled spacer 5 x max max Description Mounting plate ngled spacer Spacing (mm) Description Spacing (mm) 0 173H x ngled spacer 5 3 x Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors. djustment max. ±3.0 mm ±.0 mm 3.0 mm See mounting plates.0 mm ssembly Removal 1 9