Accessories. TIP-ON selection details C.28 Assembly, Removal, Adjustment & Safety Warning C.38

Transcription

1 Lift & Flap Systems Standard Well-suited for low frontal heights in the wall cabinet, the high cabinet and over the refrigerator abinet height max. 00 mm Silent and effortless closing, thanks to BLUMOTION Light operating forces Perfect motion with a variable stop Tool-free assembly 3-dimensional front adjustment Simple, infinitely variable lift mechanism No hinges are necessary Power factor LF = abinet height KH (mm) x door weight incl. double handle weight (kg) Blum recommends the more powerful lift mechanism for overlapping areas. Order Information 1 set Power Opening factor LF Angle Blum No ode K2B K K2E Includes: 1a, 2 X set (symmetrical) 1b, 1 x Silk White large cover cap left and right 6 x chipboard screws x 35mm NOTE: The power factor LF and the door weight can increase by 50% when a third mechanism is used. Blum recommend a trail application. Version Sold As Blum No ode Expando 5mm EA 177H3100E H3100E Knock In 10mm EA 177H H3100 Version Sold As Blum No ode Screw On Pair 175H3100V H3100V2 Accessories Opening angle stop Description Blum No ode K7A K7A Symmetrical angle stops sold as EA, 2 required per lift set Page Instructions Overview - Devices D Planning.35 Accessories.3 TIP-ON selection details.28, Removal, Adjustment & Safety Warning.38, Removal, Adjustment - TIP-ON.32 Blum Warranty A.0.3 DRAWERS, HINGES & ASSEMBLY DEVIES Dimension data and specifications may change without notification.

2 Lift & Flap Systems Standard Planning Peg position Fixing position Space requirement SOB Top panel thickness Front assembly wooden fronts and wide alu frames Use 2 chipboard screws for wooden fronts. Use 2 counter sunk self tapping screws for wide alu frames 3 x chipboard screws Ø x 35 mm * Min. 20 mm with visible wall hanging bracket ornice/crown moulding clearance D (mm) X (mm) Opening angle stop Space requirement (mm) Without Y = FH x D 100 Y = FH x D 75 A = FH x D Minimum gap MF Minimum gap 2 mm LINOLN SENTRY DRAWERS, HINGES & ASSEMBLY DEVIES.35 A.2

3 Lift & Flap Systems TIP-ON Order Information 1 TIP-ON set Power Opening factor LF Angle Blum No ode K2B00T K200T K2E00T Includes: 1a, 2 X set (symmetrical) 1b, 1 x Silk White large cover cap left and right 6 x chipboard screws x 35mm NOTE: The power factor LF and the door weight can increase by 50% when a third mechanism is used. Blum recommend a trail application. Version Sold As Blum No ode Expando 5mm EA 177H3100E H3100E Knock In 10mm EA 177H H3100 Version Sold As Blum No ode Screw On Pair 175H3100V H3100V2 TIP-ON for handle-less lift systems abinet height max. 00 mm For drilling or in combination with adapter plates Incl. screw-on catch plate (glue-on catch plate is not suitable) Accessories Optional items 7 Power factor LF = abinet height KH (mm) x door weight incl. double handle weight (kg) Blum recommends the more powerful lift mechanism for overlapping areas. Opening angle stop Description Blum No ode K7A K7A Symmetrical angle stops sold as EA, 2 required per lift set Adaptor plate Description Finish Blum No ode ruciform, Nylon, screw on 7036 grey TIP-ON Set Design abinet Height Output Blum No ode Standard Up to Version 500mm 18mm Includes: 6a, 1 x TIP-ON set 6b, 1 x screw on catch plate (with screw) 6c, 1 x adhesive catch plate (not recommended with HK TIP-ON) Page Instructions Overview - Devices Planning.37 D Accessories.36, Removal, Adjustment & Safety Warning.38, Removal, Adjustment - TIP-ON.32 Blum Warranty A.0.36 DRAWERS, HINGES & ASSEMBLY DEVIES Dimension data and specifications may change without notification.

4 Lift & Flap Systems TIP-ON Planning Peg position Fixing position Space requirement SOB Top panel thickness Front assembly wooden fronts and wide alu frames Use 2 chipboard screws for wooden fronts. Use 2 counter sunk self tapping screws for wide alu frames 3 x chipboard screws Ø x 35 mm * Min. 20 mm with visible wall hanging bracket ornice/crown moulding clearance D (mm) X (mm) Opening angle stop Space requirement (mm) Without Y = FH x D 100 Y = FH x D 75 A = FH x D Minimum gap MF Minimum gap 2 mm LINOLN SENTRY DRAWERS, HINGES & ASSEMBLY DEVIES.37 A.2

5 Lift & Flap Systems, removal and adjustment WARNING Lever arm could spring up and cause injury. aution when opening lever Do not push down on lever Front $MJDL Setting Setting.38 DRAWERS, HINGES & ASSEMBLY DEVIES Dimension data and specifications may change without notification.

6 Lift & Flap Systems, removal and adjustment Front Setting AVENTOS-cover caps Removal Removal WARNING Lever arm could spring up and cause injury. Do not push down on lever $MJDL LINOLN SENTRY DRAWERS, HINGES & ASSEMBLY DEVIES.39 A.2