Furniture Fittings Hinges and Flap Fittings

Transcription

1 Glass door hinge Area of application: For inset glass doors Glass door height: Max 1,200 mm Glass door width: Max 400 mm For door weight: Max 10 kg Material: Zinc alloy, steel, PVC Glass thickness: 6-10 mm 1 Hinge (for top) 1 Hinge (for bottom) 2 Supports Finish Nickel plated satin Support Lid stay Opening angle: 0 Material: Zinc alloy Finish: Nickel plated Version: 1-arm, with joint Installation: Screw fixing, plug in fixing to angular bracket (quick fixing system) Installation Left Right Packing: 1 pc. AH.16

2 Duo 3667 Complete set, for flaps made of wood or with aluminium frame, with adjustable spring force Use as lid stay, wooden flap Use as lid stay, flap with aluminium frame Use as flap stay, wooden flap Adjustment facility Height adjustment ±2 mm + - Tilt adjustment ±1.5 Side adjustment +3/-1 mm Pull adjustment Area of application: Also suitable for use as flap stay Opening angle: 75, 0 or 110 Material: Zinc alloy stay, steel mounting bracket Finish: Nickel plated Version: With self closing function Mounting: For left and right hand use Installation: Without tools (clip system) Distance from edge: 28 mm or 37 mm (optional) Lock function: Flap locks in any position, Braking function: Flap locks in end position, release by slight pressure For aluminium frame width 20 mm or from 45 mm Function Setting the braking effect to locking and braking by adjusting the screw with a SW4 hexagon socket: Duo 3667/Duo forte 3666 are usable as flap stay. If using as flap stay 2 arms will be necessary. Use as lid stay Use as flap stay Installation width Installation depth Duo Duo forte AH.17

3 Duo 3667 Complete set Sample measurement table for max. flap/lid weight Flap height mm Max. flap weight kg Lock function Braking function 1 Stay 2 Stay 1 Stay 2 Stay Installation Duo 3667 as flap stay For opening angle 75 Installation without magnet Installation with magnet For opening angle 0 Installation Duo 3667 as lid stay For opening angle Lid stay 1 Mounting bracket 1 Screw-on bracket Area of application Edge distance mm For wooden flaps or flaps with aluminium frame, frame width 45 mm For flaps with aluminium frame, frame width 20 mm Packing: 1 pc AH.18

4 Maxi 3675 Complete set, for flaps made of wood or with aluminium frame Opening angle: 75, 0 or 110 Material: Zinc alloy stay, steel mounting bracket and screw-on bracket, plastic cover cap for adjusting screw Finish: Nickel plated, white or black Model A: Grey, Model B: Beige, Model C: White, Model D: Black Version: With power assisted opening Mounting: Suitable for left hand and right hand use Installation: Without tools (clip system) onto pre-mounted mounting bracket Distance from edge: 28 or 37 mm (optional) Adjusting the braking effect 1 Mounting bracket for cabinet, edge distance 28 or 37 mm 1 Mounting bracket for wooden flap (wide aluminium frame) or for 20 mm aluminium frame Model Nickel plated White Black For wooden flaps and flaps with aluminium frame, from frame width 45 mm Order reference The weight specification applies to one Maxi fitting. Order two Maxi fittings for flap widths from 600 mm and above. A B C D For flaps with aluminium frame, frame width 20 mm A B C D Packing: 1 or 10 pcs. AH.1

5 Accessories for Maxi 3675 Soft-closing mechanism Area of application: For edge distance 28 and 37 mm Material: Zinc alloy Adjustable damping distance Finish Note When using soft close mechanism the mounting bracket for cabinet is not required. Nickel plated Packing: 1 or 10 pcs. Push Magnetic door catch Standard version With eject pin Heavy duty version Without eject pin For doors over height of 1,600 mm or heavy doors with more than 3 push hinges Version: With magnet for holding in closed position, with eject pin for releasing the magnet or without eject pin Material: Plastic Colour: Black/beige or orange/beige Mounting: For mounting in drilled hole in cabinet top or base panel or for installation with cruciform mounting plate Installation Standard Heavy duty Counterplate for knocking in Counterplate for glue fixing Packing: 1 or 50 pcs. AH.20

6 Free flap 1.7, for small 1-piece flaps made of wood or with aluminium frame Material: Steel fitting, plastic cover cap Finish: Fitting nickel plated For flap height: mm Opening angle: 107 (can be limited to 0 by optional opening angle restraint) Adjustment facility:holding power Installation: Fitting for screw fixing with pre-mounted Euro screws, front panel clip system (without tools) onto pre-mounted screw-on brackets Installation 2 Stay flap fittings (left/right) 2 Cover caps for fitting (right/left) 2 Screw-on brackets for wooden flaps or flaps with aluminium frame, frame width up to 45 mm 1 Drilling jig Model Grey cover caps White cover caps Front panel thickness Y mm A B C Distance X mm (With top panel thickness 16 mm) Cabinet height mm Max. flap weight kg Model A Model B Model C Opening angle restraint Area of application: For opening angle of Material Plastic AH.21

7 Free flap 3.15, for large 1-piece flaps made of wood or with aluminium frame Pictures and drawings missing! Info PM Material: Steel fitting, plastic cover cap Finish: Fitting nickel plated For flap height: mm Opening angle: 0 or 107 (adjustable for fitting) Adjustment facility:holding power Installation: Fitting for screw fixing with pre-mounted Euro screws, front panel clip system (without tools) onto pre-mounted screw-on brackets Installation 2 Stay flap fittings (left/right) 2 Cover caps for fitting (right/left) 2 Screw-on brackets for wooden flaps or flaps with aluminium frame, frame width up to 45 mm 1 Drilling jig Model Grey cover caps White cover caps Front panel thickness Y mm D E F G Distance X mm (With top panel thickness 16 mm) Cabinet height mm Max. flap weight kg Model D Model E Model F Model G Adapter for flaps with 20 mm aluminium frame Mounting: For left or right hand use screws M4x10 mm Material Zinc alloy AH.22