MULTIBUS FUNCTIONAL SPECIFICATIONS

Transcription

1 MULTIBUS FUNCTIONL SPECIFICTIONS Customer: Project manager: LawLy ctia Project#: Document Part#: Date Description By First issue Lawly Written by: 作者 : Checked by: 审核 : pproved by: 批准 :

2 WIPER Output Definition Degraded Mode Comments Validation 高速雨刮器 -Wiper High Speed ON if Key_CC Switch ON and wiper high speed switch ON and wiper low speed switch OFF and wiper intermittent switch OFF 低速雨刮器 -Wiper Low Speed ON if Key_CC Switch ON and wiper low speed switch ON and wiper high speed switch OFF and wiper intemittent switch OFF ON if Key_CC Switch ON and Wiper high speed switch is OFF and wiper low speed switch is OFF and wiper intermittent switch is OFF and wiper park position switch is OFF. ON if Key_CC Switch ON and wiper intermittent switch ON and wiper low speed switch ON and wiper high speed switch ON and wiper delay expired. Wiper delay is 5s. ON for 2 cycles, if Key_CC Switch ON and wiper high speed siwtch OFF and wiper low speed OFF and wiper intermittent OFF and Washer 洗涤器 -Washer ON if Key_CC Switch ON and Washer Switch ON OFF

3 EXTERIOR LIGHTS Output Definition Degraded Mode Comments Validation 前雾灯 -Front Fog Light ON if Key_CC Switch ON and Marker light switch is ON and Front fog light 左近光灯 -Left Low Beam ON if Key_CC Switch ON and Low Beam Switch is ON. 右近光灯 -Right Low Beam ON if Key_CC Switch ON and Low Beam Switch is ON. 左远光灯 -Left High Beam ON if Key_CC Switch ON and High Beam Switch is ON. 右远光灯 -Right High Beam ON if Key_CC Switch ON and High Beam Switch is ON. 左前转向灯 -Front Turn Left Light 右前转向灯 -Rear Turn Right Light 左后转向灯 -Rear Turn Left Light 右后转向灯 -Rear Turn Right light 左转向灯 - Turn Left Light 右转向灯 - Turn Right light 倒车灯 - erse Light 制动灯 -Brake Light (0.5s: ON, 0.5s: OFF) if Key_CC Switch ON and left turn (0.5s: ON, 0.5s: OFF) if Hazard (0.5s: ON, 0.5s: OFF) if Key_CC Switch ON and Right turn (0.5s: ON, 0.5s: OFF) if Hazard (0.5s: ON, 0.5s: OFF) if Key_CC Switch ON and left turn (0.5s: ON, 0.5s: OFF) if Hazard (0.5s: ON, 0.5s: OFF) if Key_CC Switch ON and Right turn (0.5s: ON, 0.5s: OFF) if Hazard (0.5s: ON, 0.5s: OFF) if Key_CC Switch ON and left turn (0.5s: ON, 0.5s: OFF) if Hazard (0.5s: ON, 0.5s: OFF) if Key_CC Switch ON and Right turn (0.5s: ON, 0.5s: OFF) if Hazard ON if Key_CC Switch ON and get the reverse information from J1939 ON if Key_CC Switch ON and brake ON if Key_CC Switch ON and Retarder Working Indication ON. 日光灯 1-Internal Light 1 ON if Key_CC Switch ON and Internal Light 1 switch is ON 日光灯 2-Internal Light 2 ON if Key_CC Switch ON and Internal Light 2 switch is ON 阅读灯 -Reading Light ON if Key_CC Switch ON and Reading Light switch is ON 小灯 1 -Position Light 1 ON if Key_CC Switch ON and Position light switch is ON 小灯 2 -Position Light 2 ON if Key_CC Switch ON and Position light switch is ON 小灯 3 -Position Light3 ON if Key_CC Switch ON and Position light switch is ON 小灯 4 -Position Light 4 ON if Key_CC Switch ON and Position light switch is ON 侧标志灯 - Side Marker Light ON if Key_CC Switch ON and Position light switch is ON 踏步灯 1-Step Light 1 ON if Key_CC Switch ON and Step light switch is ON 踏步灯 2-Step Light 2 ON if Key_CC Switch ON and Step light switch is ON 司机灯 -Driver Light ON if Key_CC Switch ON and Driver Light Switch ON 行李仓灯 -Luggage Cabin Light ON if Key_CC Switch ON and Cabin Light Switch ON 发动机仓灯 -Engine Cabin Light ON if Key_CC Switch ON and Engine Cabin Door Switch ON

4 DRIVE TRIN Output Definition Degraded Mode Comments Validation 起动机离合器继电器 -Start Relay ON if Key_Start Switch ON and the Engine Cabin door Switch is OFF and engine RPM < 400 and Neutral Switch ON and Generator 1 Neutral Point OFF and Generator 2 Netural OFF. ON if the Rear Start Switch is ON and Neutral switch is ON and Generator 1 Neutral Point OFF and Generator 2 Netural OFF and engine RPM < 400 and Engine Cabin Door Switch is ON. The starter relay cannot be activated for more than 5s. delay of 5s is required between several start attempts. 变速箱 IGN - Gear Box IGN ON if Key_ON Switch ON and Rear Stop Switch OFF ON if Key_ON Switch ON and BS Working Indication OFF and 缓速器电源 -Retarder Power Retarder Power Cut Switch OFF and Vehicle Speed > 6km/h OFF

5 HETING & DEFROSTER Output Definition Degraded Mode Comments Validation ON if Key_CC Switch ON and Front Door Open Switch ON and Show in the Screen 前门开门 -Front Door Open OFF Vehicle Speed < 6 km/h 前门关门 -Front Door Close ON if Key_CC Switch ON and Front Door Close Switch ON OFF

6 MISCELLNEOUS Output Definition Degraded Mode Comments Validation 总电源继电器 -Main Power Supply Relay ON if Key_CC Switch is ON. 制动管路干燥器 - Brake Dryer ON if Key_CC switch is ON and Brake Switch is OFF. Power OFF 卫生间电源 -Wash Room Power ON if Key_CC Switch ON and Wash Room Power Switch ON 卫生间排污电磁阀 -Wash Room ON if Key_CC Switch ON and (Wash Room Clean Switch 1 ON Clean or Wash Room Clean Switch 2 ON) OFF 电视 1-TV 1 ON if Key_CC Switch ON and TV 1 Switch ON 电视 2-TV 2 ON if Key_CC Switch ON and TV 2 Switch ON 喇叭 -Horn ON if Key_CC Switch ON and Horn Switch ON OFF 车身升 - Body Up ON if Key_CC Switch ON and Body Lift Switch ON and Body Limit Switch OFF and Vehicle Speed < 6km/h OFF 车身降 - Body Down ON if Key_CC Switch ON and Body Decline Switch ON and Vehicle Speed < 6km/h OFF 车身恢复正常高度 - Body ON if Key_CC Switch ON and (Body Normal Switch ON or Normal Output Vehicle Speed > 6km/h) 音响 -Sound Machine Power ON if Key_CC Switch ON 空调控制面板电源 -C ON if Key_CC Switch ON and ( Generator 1 Netural Point ON or Controller Power Generator 2 Netural Point ON) 门泵遥控器电源 -Door Remote ON if Key_CC Switch ON and Hand Brake Switch ON Controller Power 点烟器 -Cigarette Lighter ON if Key_CC Switch ON 电子钟等辅助电源 - Electronic ON if Key_CC Switch ON Clock Power 空气清洁器电源 - ir Clean Machine Power ON if Key_CC Switch ON and ir Clean Switch ON 门泵电源 - Door Pump Power ON if Key_CC Switch ON 稳定桥电磁阀输出 - Stable Bridge Output ON if Key_CC Switch ON and Vehicle Speed > 35km/h Key_ON 电源 1 - Key_ON Power 1 ON if Key_ON Switch ON Key_ON 电源 2 - Key_ON Power 2 ON if Key_ON Switch ON Key_ON 电源 3 - Key_ON Power 3 ON if Key_ON Switch ON Beep1 each time the turn lights are switched ON Beep2 each time a new alarm message or a Fault warning light is turned ON. Beep1: 200Hz during 50ms Beep2: 1000Hz during 4s Beep3: 1000Hz lasting 10s 内部蜂鸣器 -Beep Beep2 if Key in ON position and Hand Brake Switch is OFF and ir Pressure 1 larm is ON. Beep2 if Key in ON position and Hand Brake Switch is OFF and ir Pressure 2 larm is ON. Beep2 if Key in ON position and Hand Brake Switch is OFF and Low Oil Pressure is ON. Beep2 if Key in ON position and Hand Brake Switch is OFF and Low water level is OFF. Beep2 if Key in ON position and Hand Brake Switch is OFF and coolant temperature > 98 degree Beep2 if Key in ON position and Hand Brake Switch is OFF and Fuel Level < 10%. Beep2 if RPM>600 and (Generator 1 Netural Point OFF or Generator 2 Netural Point OFF) Beep 3 if Key in CC position and Safe Door Open ON N 倒车监视器电源 - erse Monitor Power 探头电源 - Camera Power ON if Key_ON Switch ON and get erse information from J1939 ON ON if Key_ON Switch ON and erse Monitor Switch ON ON if Key_ON Switch ON and get erse information from J1939 ON ON if Key_ON Switch ON and erse Monitor Switch ON

7 MultIC CWF1 Stepper Gauges Objects Picture Definition Comments Validation Fuel Level Gauge Min. level: 0, Max level: 1. Coolant Temperature Gauge Min. temp: 100 F, Max temp: 250 F. Oil Pressure Min. pres.: 0 Psi, Max pres.: 150 Psi. Gauge Battery Voltage Min. voltage: 18V, Max voltage: 32V. Gauge Vehicle Speed Min. speed.: 0 Mph, Max speed.: 80 Mph. 2.5 Mph division. Gauge Engine RPM Min. speed.: 0RPM, Max speed.: 3000RPM. 100RPM division. Gauge

8 MultIC CWF1 LED Objects Picture Definition Comments Validation Front Fog Light ON Front fog lights are ON Position light ON Low Beam are ON Engine Fault ON When Get the Engine Fault Information Through J1939 ir pressure ON Key_CC Switch is ON and (ir Pressure 1 larm is ON or ir Pressure 2 larm is ON) Engine Preheat ON Engine Preheat is ON BS ON BS Warning Switch is ON Parking ON The Hand Brake Switch is ON. High Beam ON High Beam Lights are ON Turn Left ON Turn left lights are ON Turn Right ON Turn right lights are ON Stop ON Key_CC Switch is ON and (ir Pressure 1 larm is ON or ir Pressure 2 larm is ON) ON. ON Key_CC Switch is ON and Low Oil Pressure is ON. ON Key_CC Switch is ON and High Coolant Temperature is ON ON Key_CC Switch is ON and Water Level larm Switch is ON ON Key_CC Switch is ON and (Front Left Brake Disc larm or Front Right Brake Disc larm or Middle Left Brake Disc larm or Middle Right Brake Disc larm or Rear Left Brake Disc larm or Rear Right Brake Disc larm) is ON Service ON Other faults are detected. Fuel Level ON Fuel Level < 10%. Coolant temperature ON Key Key_CC Switch is ON and coolant temperature > 220 F Oil pressure ON Key Key_CC Switch is ON and oil pressure < 15 Psi. Battery Voltage Vehicle Speed Engine Speed ON If battery voltage is less than 23V. ON If battery voltage is more than 30V. ON The vehicle speed>75 Mph ON The engine RPM > 3000rpm.

9 MultIC CWF1 LCD SYMBOLS Objects Picture Definition Comments Validation 冷却液水位过低报警 - Low coolant level 缓速器工作指示 - Retarder Working Indication SR 指示灯 -SR Warning Lamp 位置灯指示 - Position Light 蓄电池未充电报警灯 - lternator Not Work 发动机仓门开 - Engine Cabin Door Open 空档指示 -Neutral 气压 1 报警 -ir Pressure 1 Warning 气压 2 报警 -ir Pressure 2 Warning 左前蹄片报警 - Front Left Brake Disc 右前蹄片报警 - Front Right Brake Disc 左中蹄片报警 - Middle Left Brake Disc 右中蹄片报警 - Middle Right Brake Disc 左后蹄片报警 -Rear Left Brake Disc 右后蹄片报警 -Rear Right Brake Disc 空气滤清报警 - ir Filter larm NO Water in WC ON Key_ON Switch is ON and Water Level larm Switch is ON ON Key_ON Switch is ON and Retarder Working Indication ON ON Key_ON Switch is ON and SR Working Indication (or get the SR working indication from J1939) ON ON Key_ON Switch is ON and Position Light Switch is ON ON Key_ON Switch is ON and (Generator 1 Netural Point OFF or Generator 2 Netural Point OFF) ON Key_ON Switch ON and Engine Cabin Door Switch is ON ON Key_ON Switch is ON and get the Neutral information from J1939 is ON ON Key_ON Switch is ON and ir Pressure 1 Warning Switch is ON ON Key_ON Switch is ON and ir Pressure 2 Warning Switch is ON ON Key_ON Switch is ON and Front Left Brake Disc Warning ON ON Key_ON Switch ON and Front Right Brake Disc Warning ON ON Key_ON Switch is ON and Middle Left Brake Disc Warning ON ON Key_ON Switch ON and Middle Right Brake Disc Warning ON ON Key_ON Switch is ON and Rear Left Brake Disc Warning ON ON Key_ON Switch ON and Rear Right Brake Disc Warning ON ON Key_ON Switch is ON and ir Filter larm is ON ON Key_ON Switch ON and Wash Room Lack Water is ON. Body Up ON Key_ON Switch is ON and Body Lift Switch is ON. (yellow) Body Down ON Key_ON Switch ON and Body Decline Switch is ON.(yellow) Safe Door ON Key_ON Switch ON and Safe Door Open is ON. Generator ON ON Key_ON Switch is ON and (Generator 1 Netural Point OFF or Generator 2 Netural Point OFF) and RPM > 600 Engine Brake ON ON Key_ON Switch is ON and Engine Brake SW ON Show In Same Position, show the first input the system get Show In Same Position, show the first input the system get In the Same Position In the same position of Body Up and Body Down

10 LCD Messages Veh. & Optio : LL - O: OPTION Objects Picture Definition Comments Validation larm messages Two types of alarm messages are displayed. Messages for the bulbs and messages for the other devices connected to the Multibus system. When a new fault is detected by Multibus the message associated with the fault is displayed in priority. When there is more than one message to be displayed, the messages are displayed one after the other with a period of 4s.

11 MultIC CWF1 J1939 Objects Identifier Sender Receiver Frequency SPN Definition Comments Validation RPM 0CF00400 Engine MultIC 10ms 190 Coolant Temperature Byte 4, rpm/bit gain, 0 rpm offset Upper byte 32rpm/bit gain 18FEEE00 Engine MultIC 1000ms degree/bit gain, -40 degree offset Oil Pressure 18FEEF00 Engine MultIC 500ms 100 Vehicle Speed 18FEE100 Engine MultIC 100ms 84 Current Gear 18F00503 Transmissa n MultIC 100ms byte, 4 kpa/bit gain,0 kpa offset 0 to kpa Resolution: 1/256 km/h/bit gain, 0 km/h offset Data range: km/h $FFFF Not unused Resolution: 1 gear value/bit, -125 offset Data range: $FF Not used negative values are reverse gears, positive values are forward gears, zero is neutral 251 (FB16) is park