Contents. Fieldbus, data cables and accessories. Fieldbus, data cables and accessories C.1. Introduction C.2. Fieldbus distributor - Overview C.

Transcription

1 ontents Introduction.2 Fieldbus distributor - Overview.4 PROFIU-DP - cables.6 PROFIU-DP - connectors (M12, ub-d). 10 PROFIU-DP - Fon T-distributor. 22 PROFIU-P - cables. 26 PROFIU P - connectors. 31 PROFIU-P - Fon T-distributor. 34 PROFIU-P - Fon T-distributor with surge protection. 40 PROFIU-P - Fon T-distributor TEX Ex(ia). 50 Nopen & DeviceNet - cables (M12, M8). 58 Nopen & DeviceNet - connectors. 63 I - ables. 64 I - T-piece. 65 Ethernet cables. 66 Ethernet plug-in connector. 70 FOUNDTION Fieldbus - connector (7/8 ). 72 ccessories cable glands. 73.1

2 Introduction us cables The bus system lies at the heart of automation engineering. High quality products are essential here if you hope to achieve long term, smooth functionality. It s not only the slaves and controllers that play a significant role; the type of cables and connection mechanisms in use are also very important. The Weidmüller bus cables are the perfect solution here. The products which we manufacture ourselves (used, for example, in the Profibus, industrial Ethernet and Nopen/DeviceNet sectors) have a 360 degree shielding within the moulding. This provides effective protection for signal and data transmission. Delivery times are another decisive factor. Our special production strategy allows us to quickly manufacture parts that are customised to a specific order. We have a dedicated department that is focussed on this strategy and located near the Detmold central warehouse in order to keep delivery times to a minimum. us cables: shown here in the standard colours: blue (Profibus-P Ex i), black (Nopen/DeviceNet or Profibus-P), magenta (Profibus-DP) and green (industrial Ethernet) together with the sensor cables.2

3 Introduction ables M12 plug-in connector ub-d connector Fon T-distributor.3

4 Fieldbus distributor Overview ystem description, fieldbus components Fon fieldbus distributors are available in industrial and Ex(ia) versions. They are used for coupling 1-8field devices or sensors. The connection is made via spur. The spur is connected by an M12 plug in connector or directly via an EM cable gland. The communication and device powering is handled by a common 2-core wire. The distributors offer the following features irrespective of the version: T TEX version Typical PROFIU system layout.4

5 Fieldbus distributor Overview Product coding The Fon family of distributors includes various forms. The product name indicates the respective features as follows: The standard distributors are grey. The Ex approved distributors are painted blue. Fon P DP G PG G/M12 1way Limiter OVP EX TEX Field us onnection PROFIU-P Process utomation PROFIU-DP Decentralised Periphery tainless teel tainless steel cable gland on stainless steel housing. On standard aluminium housings, the cable gland is nickel-plated brass. Plastic able Gland M12 plug-in connector for the stub cables and cable gland for the trunk cable Number of outgoing stub lines urrent limiter: protects the PROFIU-P network in the event of an overload in the stub line urge protection: protects the system in the event of a voltage surge pproved for potentially explosive areas For explosive atmospheres PROFIU-P distributors are generally equipped with a switch in terminating resistor. In potentially explosive areas, the terminating resistor is manufactured with a separate box. This must be used instead of the right-hand cable gland. In the case of PROFIU-DP, an additional external 24 V D power supply is required. This makes the terminator independent of the last station in the network. Fon P G/M12 1way Limiter Fon PG 1way Fon P G 1way Ex.5

6 PROFIU-DP - cables PROFIU-DP cables one end without connector hielded Halogen Male Female Male, straight PUR/TPE PV/PV Male, angled PUR/TPE PV/PV Female, straight PUR/TPE PV/PV Female, angled PUR/TPE PV/PV 2-pole Type Order No. IL-M12G-P-1.5D IL-M12G-P-1.5E IL-M12W-P-1.5D IL-M12W-P-1.5E IL-M12G-P-1.5D IL-M12G-P-1.5E IL-M12W-P-1.5D IL-M12W-P-1.5E Other versions on request tandard cable lengths ll cables listed under the ordering data have a length of etres. The last four ordering digits must be changed when ordering other standard cable lengths. xxxxxx m xxxxxx m xxxxxx L L 10.0 m xxxxxx heathing colour magenta (RL 4008) Protection class IP 67 ore cross-section 0.34 mm² Ø 14.6 L ontact surface gold-plated Temperature range of housing Ø 14.6 L Ø 14.6 Ø 14.6 hapter W includes additional technical specifications for the cable.6

7 PROFIU-DP - cables PROFIU-DP cables onnecting cables hielded Halogen Male Female Male, straight - Female, straight PUR/TPE PV/PV Male, straight - Female, angled PUR/TPE PV/PV Male, angled - Female, angled PUR/TPE PV/PV 2-pole Type Order No. IL-M12GM12G-P-1.5D IL-M12GM12G-P-1.5E IL-M12GM12W-P-1.5D IL-M12GM12W-P-1.5E IL-M12WM12W-P-1.5D IL-M12WM12W-P-1.5E Other versions on request tandard cable lengths ll cables listed under the ordering data have a length of etres. The last four ordering digits must be changed when ordering other standard cable lengths. xxxxxx m xxxxxx m xxxxxx L L 10.0 m xxxxxx heathing colour magenta (RL 4008) Protection class IP 67 ore cross-section 0.34 mm² Ø 14.6 L ontact surface gold-plated Temperature range of housing Ø 14.6 L Ø 14.6 Ø 14.6 hapter W includes additional technical specifications for the cable.7

8 PROFIU-DP - cables PROFIU-DP bulk lengths PROFIU-DP bulk lengths Metre goods Type Order No. IH-P-2X0.24-PUR Electrical characteristics at 20 Requirement Test specifications onductor resistance EN Parts 1-2 WG Ω/km Insulation resistance EN Parts 1-4 Operational capacity / EN Parts 1-5 at 800 Hz 35 nf/km apacitive earth coupling EN Parts 1-5 at 800 Hz < 1500 pf/km haracteristic impedance EN Parts 1-11 at 9.6 khz at 38.4 khz at 3-20 MHz 300 Ω (RW) (185 ± 20) Ω (150 ± 15) Ω onductor attenuation (nominal values) EN Parts 1-8 WG 24 at 9.6 khz at 38.4 khz at 4 MHz at 16 MHz 3 d/km 5 d/km 26 d/km 55 d/km Test voltage (U eff ) (50 Hz, 1 min.) EN Parts 1-3 Wire/wire 500 V Wire/shield 500 V Thermal characteristics Requirement Permitted operating temperature range tatic usage: TPE-U sheathing -40 to +70 Dynamic usage (routing/installation): TPE-U sheathing -20 to +60 Mechanical characteristics Max. permitted strain load: tatic Dynamic ending radius *) simple multiple Requirement 50 N/mm 2 20 N/mm 2 tranded Litz conductor (WG 24) 7.5 x d 15 x d.8

9 PROFIU-DP - cables PROFIU-DP bulk lengths PROFIU-DP bulk lengths Metre goods Type Order No. IH-P-2X0.34-PV DE ssembly Wire onductor: copper wire, without insulation, WG 22, 0.64 mm Ø nominal Insulation: PE foam, 2.55 mm Ø nominal Pair 2 wires according to 4.1 (red, green) to pair stranded, 5.1 mm Ø nominal Wrapping Plastic foil, 5.2 mm Ø nominal hield a) L foil, 5.4 mm Ø nominal b) raiding tin-plated copper, coverage approx. 60 %, 6.0 mm Ø nominal Outer cladding PV YM, 7.8 ±0.2 mm Ø nominal Electrical characteristics at 20 onductor resistance 55 Ω/km Insulation resistance Operational capacity 30 pf/m nominal haracteristic impedance 9.6 KHz (RW) 38.4 KHz (RW) 3 20 MHz 270 Ω 185 Ω 150 ± 15 Ω ttenuation 9.6 KHz 38.4 KHz 100 KHz 1 MHz 3 MHz 10 MHz 20 MHz 2.2 d/km 3.4 d/km 4.5 d/km 11.5 d/km 18.2 d/km 33.2 d/km 48.0 d/km Test voltage (50 Hz, 1 min.) Wire/wire Wire/shield 1.5 kveff 1.5 kveff Mechanical and thermal characteristics Temperature range tationary -40 to +70 moving Min. permitted bending radius Once Multiple 1.5 kveff 1.5 kveff Max. tensile load resistance tatic Dynamic 1.5 kveff 1.5 kveff Thermal fire load (guideline value) good.9

10 PROFIU-DP - connectors (M12, ubd) Tension clamp connection M12, stainless steel -coded I / I V straight Male ocket 5-pole, PG 9 5-pole, PG 9 I 5/9-V--OD I 5/9-V--OD Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface Tension clamp connection /316L M mm mm² V IP 69 k gold-plated P = PROFIU (-OD) able entry Ø 6 8 mm able entry Ø 6 8 mm approx. 62 approx. 57 P = PROFIU (-OD) Ø 19.6 Ø

11 PROFIU-DP - connectors (M12, ubd) crew connection M12, metal (EM) -coded IM / IM straight IW / IW ngled Male ocket 5-pole, PG 9 5-pole, PG 9 IM 5/8 M12 5P -OD IM 5/8 M12 5P -OD IW-M-5/8 M12 -OD IW-M-5/8 M12 -OD Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface crew connection uzn M mm (PG9) mm² V IP 67 gold-plated crew connection uzn M mm (PG9) mm² V IP 67 gold-plated able entry Ø 6 8 mm able entry Ø 6 8 mm 31.1 approx. 55 approx. 62 approx approx. 55 Ø 18.0 Ø 18.0 O 19.6 Ø 19.6 Ø 19.6 O

12 PROFIU-DP - connectors (M12, ubd) ID connection -coded I / I straight Male ocket 3-pole, PG 9 3-pole, PG 9 I-3-ID-M12-OD I-3-ID-M12-OD Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface Insulation displacement connection uzn M mm mm² 4 32 V IP 67 tinned P = PROFIU (-OD) IE = Industrial Ethernet (D-OD) Ø 20.5 Ø 20.5 approx approx P = PROFIU (-OD) IE = Industrial Ethernet (D-OD).12

13 .13

14 PROFIU-DP - connectors (M12, ub-d) ub-d This compact connector provides a convenient bus connection for all standardised PROFIU-DP devices. data transmission rate of max. 12 Mbps is possible. n additional ub-d connector on top of the plug enables analysis/programming devices to be connected without modifying the wiring. P-DP U-D The 9-pin sub-d connector is available in four versions: 1. without terminating resistor 2. with built in terminating resistor 3. with switch in terminating resistor and connection for programming unit via ID connection 4. with switch in terminating resistor and connection for programming unit via tension clamp connection. X1 Print terminal X2 D-ub, male L1 L2 L3 L4 hielding on cable 3 8 hielding on housing Data transmission rate ED Operating temperature torage temperature Ingress protection class Dimensions (LxWxH) mm Housing material Plug-in connector able connection able diameter mm ingle conductor cross-section mm 2 Type of connection crew ID Tension clamp max. 12 Mbps protection to IE IP x 47.5 x 16 P UL 94 V-1 sub-d 9-pin 2 No. horizontal rigid max. 1.5 flexible max and P-DP U-D

15 PROFIU-DP - connectors (M12, ub-d) ub-d P-DP U-D TERM P-DP U-D ID/ZF TERM P X1 Print terminal + 5V X2 D-ub, male X1 Print terminal + 5V X2 D-ub, male X3 D-ub, female 6 L1 6 6 R1 390 Ohm 3 8 L R1 390 Ohm 3 3 R2 220 Ohm L R2 220 Ohm 8 8 R3 390 Ohm L4 R3 390 Ohm witch setting Off right hielding on cable hielding on housing hielding on cable hielding on housing P-DP U-D TERM P-DP U-D ID TERM P P-DP U-D ZF TERM P

16 PROFIU-DP - connectors (M12, ub-d) PROFIU ub-d connector with M12 (90 ) Weidmüller s new ub-d product line features fully shielded connector variants that enable direct tapping with M12 cables. This allows you to avoid the types or errors that often occur when installing similar connectors with screw connections. The increased contact reliability of the ub-d connectors more than compensates for the cost of the extra M12 connectors. pecial features: P-DP U-D M12 TERM PROFIU-onnector 90 M12 with switch, without programming connector the M12 connector ON OFF Data rate onnector pinning PROFIU DP connector PROFIU DP program connector PROFIU cable connector Mechanical lifetime Temperature range Humidity Ingress protection class Housing material D-ub screw connection acc. to PROFIU pecification, 12Mbit/s acc. to PROFIU pecification D-ub 9-polig, male D-ub 9-polig, female M12 coded, male + female, Pin 2 and 4, connected, able output: M12 female, able entry: M12 male 200 connections -20 to +70 IP30 Znl UN 4-40 P-DP U-D M12 TERM

17 PROFIU-DP - connectors (M12, ub-d) PROFIU ub-d connector with M12 (90 ) P-DP U-D M12 TERM P PROFIU-onnector 90 M12 with switch, with programming connector ON OFF P-DP U-D M12 TERM P

18 PROFIU-DP - connectors (M12, ub-d) PROFIU ub-d onnector with tension clamp connection (35 ) The new ub-d Family from Weidmüller offers a fully shielded version. P-DP U-D ZF35TERM PROFIU-onnector 35 with switch, without programming connector pecial features: ON OFF Data rate onnector pinning PROFIU DP connector PROFIU DP program connector PROFIU cable connector Mechanical lifetime Temperature range Humidity Ingress protection class Housing material D-ub screw connection acc. to PROFIU pecification, 12Mbit/s acc. to PROFIU pecification D-ub 9-polig, male D-ub 9-polig, female Tension clamp 200 mating cycles -20 to +70 IP30 Znl UN 4-40 P-DP U-D ZF35TERM

19 PROFIU-DP - connectors (M12, ub-d) PROFIU ub-d onnector with tension clamp connection (35 ) P-DP U-D ZF35TERM P PROFIU-onnector 35 with switch, with programming connector ON OFF P-DP U-D ZF35TERM P

20 PROFIU-DP - connectors (M12, ub-d) PROFIU ub-d onnector with tension clamp connection (90 ) The new ub-d Family from Weidmüller offers a fully shielded Version. P-DP U-D ZF PROFIU-onnector 90 without switch, without programming connector pecial features: Data rate onnector pinning PROFIU DP connector PROFIU DP program connector PROFIU cable connector Mechanical lifetime Temperature range Humidity Ingress protection class Housing material D ub screw connection acc. to PROFIU pecification, 12Mbit/s acc. to PROFIU pecification D-ub 9-polig, male D-ub 9-polig, female Tension clamp 200 mating cycles -20 to +70 IP30 Znl UN 4-40 P-DP U-D ZF

21 PROFIU-DP - connectors (M12, ub-d) PROFIU ub-d onnector with tension clamp connection (90 ) P-DP U-D ZF TERM PROFIU-onnector 90 with switch, without programming connector P-DP U-D ZF TERM P PROFIU-onnector 90 with switch, with programming connector P-DP U-D ZF TERM P-DP U-D ZF TERM P

22 PROFIU-DP - Fon T-distributor PROFIU-DP distributors PROFIU-DP distributor PROFIU-DP The PROFIU-DP topology is a line structure. The spur to the bus cable. The length of the spur cable depends on the transmission rate and should be as short as possible. The total of all spur lengths for transmission rates up to 1.5 Maud may an EM cable gland into an aluminium or stainless steel enclosure where it is connected to a tension clamp terminal. The spur line to the device is connected using a -coded M12 isolated 24-VD power supply for the bus terminator is routed into the cable gland on the right side. The housing features a pressure-compensation mechanism that counters the effects of climatic fluctuations. The guidelines issued by the PROFIU user organisation must be observed. Operating temperature 25 to 55 Ingress protection class IP 66 Enclosure material High grade aluminium alloy (L I 12) Finish Painted RL 7001 PROFIU-DP connection Tension clamp terminals 0.5 m 2 able entry able gland M16 able gland clamping range mm ontact surface Transmission rate Max. 1.5 Maud Power supply bus connection Installation advice Torques M16 cable gland at enclosure Union nut, M16 cable gland Enclosure cover External earthing cable daptor/stud cable 6.0 Nm 4.0 Nm N Nm 0.5 Nm Pin assignment Pin no. onnection Wire colour Pin 1 unassigned Pin 2 RxDx/TxD-N / -wire green Pin 3 unassigned Pin 4 RxDx/TxD-N / -wire red Pin 5 shield able gland shield ocket -coded

23 PROFIU-DP - Fon T-distributor 1-channel distributor able gland 1-channel distributor M12 connection Type Type of connection Qty. Order No. luminium housing tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon DP M12 1way branch line M tainless steel enclosure Fon DP M12 1way branch line M G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland Wiring diagram Wiring diagram L1 L3 L2 L4 1 2 X11 X13.23

24 PROFIU-DP - Fon T-distributor Terminator able gland Terminator M12 connection Type Type of connection Qty. Order No. luminium housing tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon DP M12 Term 24V branch line M Fon DP M12 Term 5V branch line M tainless steel enclosure Fon DP M12 Term 24V branch line M G = brass cable gland PG = plastic cable gland Wiring diagram Wiring diagram.24

25 PROFIU-DP - Fon T-distributor PROFIU-DP IP 20 T-distributor The distributor for PROFIU-DP enables the user to connect it conveniently in the electrical cabinet. They can be mounted on T32/35 rails and used to connect standardised PROFIU-DP lines. pur cables can also be short as possible. Part No has a 9-pin sub-d R P-DP T X2 X4 X5 X6 able clamp X8 L1 L3 L2 L4 X1 X3 Data transmission rate max. 1.5 Mbps (with max. 6.6 m spur line) max. 12 Mbps (no spur lines) Operating temperature torage temperature Ingress protection class IP 20 Dimensions (LxWxH) mm 70 x 45 x 42 Plug-in connector sub-d 9-pin able diameter mm ingle conductor cross-section mm Type of connection screw Information able clamp X7 R P-DP T U-D R P-DP T R P-DP T U-D X2 X4 L1 L3 L2 L4 X1 X3 X5 X6 U D X9/3 X9/8 X9/10 X9/11 able clamp X8 X9/1 X9/5 X9/7 able clamp X7 unused X9/9 X9/2 X9/4 X9/6.25

26 PROFIU-P - cables The PROFIU-P of process engineering, such as remote powering and intrinsic safety. The PROFIU-P enables operation of several P sensors and actuators on one bus line. The devices are powered using twin cable technology, and the transmission of process data is digital. a segment coupler. Organisation F connectors from Weidmüller enable connection or replace- n extensive range of accessories such as pre-assembled cables and plug connectors rounds off the programme..26

27 PROFIU-P - cables PROFIU-P cables PROFIU-P connectors Profibus P distributors.27

28 PROFIU-P - cables ables hielded Halogen Male Female Designation Industrial zone One side without connector, male 1 m 2 m 5 m 10 m One side without connector, female 1 m 2 m 5 m 10 m onnecting cables, male - female 1 m 2 m 5 m 10 m Type PROFIU-P cable Order No. F P M12 M 1M F P M12 M 2M F P M12 M 5M F P M12 M 10M F P M12 FM 1M F P M12 FM 2M F P M12 FM 5M F P M12 FM 10M F P M12 M-FM 1M F P M12 M-FM 2M F P M12 M-FM 5M F P M12 M-FM 10M Other lengths available on request Wall bushing Type Length Qty. Order No. I-WDF-5P M12 60 mm 60 mm ustomisable male and female connectors are still required for use with cables that have a connector on only one end Inductance 800 Hz ca. 0.4 Ω at 1 MHz nom. Ω 80 Wave attenuation max. d/ 100 m 0.3 nom. d/ 100 m 0.35 at 1 MHz nom. d/ 100 m 1.2 ignal dispersion speed 79 oupling resistance up to 30 MHz max. mohm/m 250 Operating voltage (not for three-phase use) 100 Test voltage Wire/wire U eff. V 1500 Wire/shield U eff. V 1500 Mechanical specifications tationary bending radius mm 65 Temperature range tationary moving Ø L 37 L L Ø L 18 Ø 14.6 Ø

29 PROFIU-P - cables Ex i-cables hielded Halogen Male Female Designation Intrinsically safe zone Exi One side without connector, male M12 EMV/blue/1M 1 m M12 EMV/blue/2M 2 m M12 EMV/blue/5M 5 m M12 EMV/blue/10M 10 m One side without connector, female M12 EMV/blue/1M 1 m M12 EMV/blue/2M 2 m M12 EMV/blue/5M 5 m M12 EMV/blue/10M 10 m onnecting cables, male - female M12 EMV/blue/1M 1 m M12 EMV/blue/2M 2 m M12 EMV/blue/5M 5 m M12 EMV/blue/10M 10 m Type PROFIU-P cable Order No. FEX P M12 M 1M FEX P M12 M 2M FEX P M12 M 5M FEX P M12 M 10M FEX P M12 FM 1M FEX P M12 FM 2M FEX P M12 FM 5M FEX P M12 FM 10M FEX P M12 M-FM 1M FEX P M12 M-FM 2M FEX P M12 M-FM 5M FEX P M12 M-FM 10M Other lengths available on request Wall bushing Type Length Qty. Order No. I-WDF-5P M12 60 mm 60 mm ustomisable male and female connectors are still required for use with cables that have a connector on only one end Inductance 800 Hz ca. 0.4 Ω at 1 MHz nom. Ω 80 Wave attenuation max. d/ 100 m 0.3 nom. d/ 100 m 0.35 at 1 MHz nom. d/ 100 m 1.2 ignal dispersion speed 79 oupling resistance up to 30 MHz max. mohm/m 250 Operating voltage (not for three-phase use) 100 Test voltage Wire/wire U eff. V 1500 Wire/shield U eff. V 1500 Mechanical specifications tationary bending radius mm 65 Temperature range tationary moving Ø L 37 L L Ø L 18 Ø 14.6 Ø

30 PROFIU-P - cables PROFIU-P bulk lengths PROFIU-P bulk lengths pplication: Type Order No. IH-P-P-2X1.0-PV-L IH-P-P-2X1.0-PV-W The cable is suitable for installation in both dry and humid spaces. When General characteristics: None of the materials used for the cables and during their production contain materials which are detrimental to paint adhesion (they are L-free). L = Materials detrimental to paint adhesion ssembly onductor opper wire, without insulation, 1.0 mm 2 Insulating sleeve Wire colours: red and green tranding Wrapping 1 layer insulation foil hield raiding made from tin-plated copper wire, Outer cladding Outer diameter: 8.0 mm ± 0.4 Electrical characteristics at Inductance ca. 0.4 haracteristic impedance at 1 MHz nom. Ω 80 Wave attenuation max. d/100 m 0.3 om. d/100 m 0.35 at 1 MHz nom. d/100 m 1.2 ignal dispersion speed 79 oupling resistance at 30 MHz max. mohm/m 250 Operating voltage (not for three-phase use) 100 Test voltage Wire/wire U eff. V 1500 Wire/shield U eff. V 1500 Mechanical and thermal characteristics Min. bending radius stationary installed / during installation mm 65 Temperature range during installation -5 to +60 Temperature range stationary installed -30 to +80 Flammability Flame retardant in accordance with VDE 0482, part / IE

31 PROFIU-P - connectors crew connection M12, metal (EM) -coded Fon / I straight IW / IW ngled Male ocket 4-pole, PG 9 5-pole, PG 9 4-pole, PG 9 5-pole, PG 9 Fon M12 4P M EM I-M-5/8 M12 5P -OD Fon M12 4P FM EM I-M-5/8 M12 5P -OD Other versions on request IW-M-4/8 M IW-M-5/8 M IW-M-4/8 M IW-M-5/8 M Other versions on request Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface crew connection uzn M mm (PG9) mm² V IP 67 gold-plated crew connection uzn M mm (PG9) mm² V IP 67 gold-plated able entry Ø 6 8 mm able entry Ø 6 8 mm 31.1 approx. 55 approx. 62 approx approx. 55 Ø 18.0 Ø 18.0 O 19.6 Ø 19.6 Ø 19.6 O

32 PROFIU-P - connectors Tension clamp connection M12, stainless steel -coded I / I V straight Male ocket 5-pole, PG 9 5-pole, PG 9 I 5/9-V I 5/9-V Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface Tension clamp connection /316L M mm mm² V IP 69 k gold-plated P = PROFIU (-OD) able entry Ø 6 8 mm able entry Ø 6 8 mm approx. 62 approx. 57 P = PROFIU (-OD) Ø 19.6 Ø

33 PROFIU P - connectors Positioning plug connector Positioning plug connector Positioning plug connector PG9 500 mm dapter PG9 / M20 Positioning plug connector PG mm Positioning plug connector PG mm Positioning plug connector M mm Positioning plug connector M mm Positioning plug connector M mm IE-M U-EH-V IE-EW-M20/PG9-W24-V PO-4P M12 PG13,5 150mm PO-4P M12 PG13,5 300 mm PO-4P M12 M20 150mm PO-4P M12 M20 300mm PO-5P M12/M20 300MM No. of poles Version Temperature range Housing material onnection thread Plug thread trand cross-section mm 2 Housing class of protection to DIN IE 529 trand length (fitted with wire-end ferrules ) mm Nominal current per contact Rated voltage V ontact surface Type of connection Flammability class to UL-94 Nominal voltage to VDE standard 0110/IO Group V Resistance to creepage ontact resistance to IE 512 Part 2 m Ω Insulation resistance to IE 512 Part 2 Ω 4 pin stainless steel (V) PG 9 M IP gold-plated screw Positioning plug connector for field device connection 4/5 pin u Zn nickel surface PG 13.5 / M 20 M (4 poles) 0.34 (5 poles) IP /300 3 uznu screw V ~ 150 = K M12 x 1 approx /300 mm Fitting information et screw Knurled ring Lock-nut Torque settings Nm hand-tight 6.25 Nm If the device is exposed to vibration, we recommend using a stub cable to isolate the device from the vibration. L *) Pg 9 W Ø 18 1 ontact assignment br 1 wh 2 bl 3 bk 4 (4) (3) (1) (2) n.c. P shield P+ n.c. not connected.33

34 PROFIU-P - Fon T-distributor Fon distributors for the industrial segment PROFIU-P T-connector standard The PROFIU-P installation products are increasingly used in the: The product range offers a wide choice of customer solutions also for use in harsh conditions. This includes standard and connection or cable gland. Weidmüller offers a solution for almost every application. If you cannot find your solution here, please contact the branch / sales office responsible for you. PROFIU-P T-connector standard The PROFIU-P T-connector is intended for direct coupling of measuring devices, sensors, actuators, etc..34

35 PROFIU-P - Fon T-distributor Fon Fieldbus distributor PROFIU-P Fieldbus distributor: sturdy and well-tested Fon fieldbus distributors are available in industrial and Ex(ia) versions. They are used for coupling 1-8field devices or sensors. The connection is made via spur. The spur is connected by an M12 plug-in connector or directly via an EM cable gland. The communication and device powering is handled by a common 2-core wire. The PROFIU-P distributors normally feature a switchable terminating resistor. For the Ex zone, the terminating resistor is made with a separate box. urrent limiting variants help to ensure that the facility can operate smoothly. Weidmüller offers a comprehensive line of accessories including pre-assembled PROFIU-P cables in the standard lengths, and plug in connectors for a wide variety of applications. for PROFIU-P standard distributors Temperature range Operating temperature from 40 to 85 Ingress protection class IP 66 Housing material urface tove-enamelled RL 7001 PROFIU-P connection Tension clamp connection m 2 able entry able gland M16 lamping range mm Measuring device connector M12 x 14-pin ontacts M, surface UZnu Information Handling information Torques M16 gland to housing M16 union nut on cable gland Housing cover External earth stud 6.25 Nm 4.5 Nm Nm Nm housing for connecting from 1 to 8 field devices processing industry, for connecting from 1 to 8 field devices connecting from 1 to 8 field devices T.35

36 PROFIU-P - Fon T-distributor 1-channel distributor able gland 1-channel distributor M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 1way branch line G tainless steel enclosure Fon G 1way branch line G Fon PG 1way all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 1way branch line M tainless steel enclosure Fon G/M12 1way branch line M G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off on R1 1 off on R Wiring diagram Wiring diagram us connection us connection Wire jumper off on R1 1 Wire jumper off on R1 1 P- hield P+ Housing n.c. P- (3) hield (4) P+ (1) n.c. (2).36

37 PROFIU-P - Fon T-distributor 2-channel distributor able gland 2-channel distributor M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 2way branch line G tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon P G/M12 2way branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off 1 64 off 1 on R1 on R Wiring diagram Wiring diagram us connection us connection Wire jumper off on R1 1 Wire jumper off on R1 1 P- hield P+ Housing n.c. n.c. P- (3) hield (4) P+ (1) n.c. (2).37

38 PROFIU-P - Fon T-distributor 4-channel distributor able gland 4-channel distributor M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 4way branch line G tainless steel enclosure Fon G 4way branch line G Fon PG 4way all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 4way branch line M tainless steel enclosure Fon G/M12 4way branch line M G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off on off on R1 1 R Wiring diagram Wiring diagram us connection Plug-in bus connection Wire jumper Wire jumper P- (3) P- hield Housing n.c. n.c. n.c. n.c. hield (4) P+ (1) n.c. (2) P+.38

39 PROFIU-P - Fon T-distributor 8-channel distributor able gland 8-channel distributor M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 8way branch line G tainless steel enclosure Fon G 8way branch line G Fon PG 8way all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 8way branch line M tainless steel enclosure Fon G/M12 8way branch line M G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off on 80 off on Wiring diagram Wiring diagram us connection R1 off on R1 Wire jumper P- hield P+ PE P- hield P n.c. view on socket.39

40 PROFIU-P - Fon T-distributor with surge protection Fieldbus components for industrial applications with surge protection or current limiter DIP switches m 20/40/60 m 20/40/60 m 20/40/60 m 20/40/60 m 40 m 60 m P- hield P+ Example: 4-way module with current limiter PROFIU-P T-connectors Fine surge protection or integrated current limiting mechanisms are designed for protecting connected measuring devices, sensors or actuators from surge voltages. Gas-discharge tubes and suppressor diodes are voltage-limiting protection mechanisms. If a rapidly rising voltage pulse reaches the input of a T-connector with surge protection, the gas discharge tube ignites and discharges a high current. The residual pulse is limited by a suppressor diode. In the case of a slow rise in voltage, the pulse is processed by the diode alone. The housing is connected to the protective earth via an external earth stud. When using the connectors for current limiting, the PROFIU-P network is protected against short circuits with protective circuitry. The current can be set to either 20 m, 40 m or 60 m by means of two DIP switches. urge protection Operating temperature 40 to 85 Ingress protection class IP 67 Enclosure material High grade aluminium alloy (L I 12) Finish Painted RL 7001 PROFIU-P connection Tension clamp terminals 0.5 m 2 able entry able gland M16 ranch M12 socket (4-pin) able gland clamping range mm Nominal voltage D/ U N = 24 V D/18 V Max. permissible operating voltage U = 30 V D/21 V Rated current at 30 I N = 500 m Trip surge voltage (1 kv/μs) < 600 V Rated discharge surge current (8/20 μs) I N = 10 K (wire-wire, wire-pe) Output voltage limit (8/20 μs) U P = 65 V PROFIU-P bus terminator Via jumper Limiter Operating temperature 40 to 85 Ingress protection class IP 67 Enclosure material High grade aluminium alloy (l i 12) (L I 12) Finish Painted RL 7001 PROFIU-P connection Tension clamp terminals 0.5 m 2 able entry able gland M16 ranch M12 socket (4-pin) able gland clamping range mm hort-circuit protection per station PROFIU-P bus terminator 20, 40, 60 m settings Via jumper Installation advice Torques crew terminals M16 cable gland at enclosure Union nut M16 cable gland Enclosure cover External earthing cable 0.4 Nm 6.0 Nm 4.0 Nm Nm Nm Installation advice Torques crew terminals M16 cable gland at enclosure Union nut M16 cable gland Enclosure cover External earthing cable 0.4 Nm 6.0 Nm 4.0 Nm Nm Nm.40

41 PROFIU-P - Fon T-distributor with surge protection 1-channel distributor (OVP) able gland 1-channel distributor (OVP) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 1way OVP branch line G tainless steel enclosure Fon PG 1way OVP all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 1way OVP branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland Wiring diagram Wiring diagram 1 x1 x3 1 1 x1 x R2 1 2 R R2 1 2 R R5 R6 R1 R5 R6 R1 V x8 V x8 P- P- (3) x2 1 2 x4 3 hield P+ x2 1 2 x4 3 hield (4) P+ (1).41

42 PROFIU-P - Fon T-distributor with surge protection 2-channel distributor (OVP) able gland 2-channel distributor (OVP) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 2way OVP branch line G tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon P G/M12 2way OVP branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland on Wiring diagram Wiring diagram x1 1 x4 1 x1 1 x R R R R R4 V1 R5 R1 R4 V1 R5 R x x10 x2 x P- hield x2 x P- (3) hield (4) P+ P+ (1).42

43 PROFIU-P - Fon T-distributor with surge protection 4-channel distributor (OVP) able gland 4-channel distributor (OVP) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 4way OVP branch line G tainless steel enclosure Fon PG 4way OVP all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 4way OVP branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland Wiring diagram Wiring diagram x R2 1 2 R4 1 R3 2 3 R5 V x7 R1 1 x x R2 1 2 R4 1 R3 2 3 R5 V x7 R R x x x x x P- hield P+ x x x x P- (3) hield (4) P+ (1).43

44 PROFIU-P - Fon T-distributor with surge protection 8-channel distributor (OVP) able gland 8-channel distributor (OVP) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 8way OVP branch line G tainless steel enclosure Fon PG 8way OVP all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 8way OVP branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland 80 off on Wiring diagram Wiring diagram x R2 1 2 R4 1 R3 2 3 R5 V x7 R1 1 x x R2 1 2 R4 1 R3 2 3 R5 V x7 R1 1 x x2 x3 x4 x x2 x3 x4 x x x 27 x x P- hield P+ x x 27 x x P- (3) hield (4) P+ (1).44

45 PROFIU-P - Fon T-distributor with surge protection 1-channel distributor (limiter) able gland 1-channel distributor (limiter) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 1way Limiter branch line G tainless steel enclosure Fon PG 1way Limiter all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 1way Limiter branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off on R1 1 off on R Wiring diagram Wiring diagram DIP switches 1 2 DIP switches m 20 m 20/40/60 m 40 m 20/40/60 m 40 m 60 m 60 m P- hield P- hield (3) (4) P+ P+ (1).45

46 PROFIU-P - Fon T-distributor with surge protection 2-channel distributor (limiter) able gland 2-channel distributor (limiter) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 2way Limiter branch line G tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon P G/M12 2way Limiter branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off 1 64 off 1 on R1 on R Wiring diagram Wiring diagram DIP switches 1 2 DIP switches m 20 m 20/40/60 m 20/40/60 m 40 m 20/40/60 m 20/40/60 m 40 m 60 m 60 m P- hield P- hield (3) (4) P+ P+ (1).46

47 PROFIU-P - Fon T-distributor with surge protection 4-channel distributor (limiter) able gland 4-channel distributor (limiter) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 4way Limiter branch line G tainless steel enclosure Fon PG 4way Limiter all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 4way Limiter branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off on R1 1 off on R Wiring diagram Wiring diagram DIP switches 1 2 DIP switches m 20 m 20/40/60 m 20/40/60 m 20/40/60 m 20/40/60 m 40 m 20/40/60 m 20/40/60 m 20/40/60 m 20/40/60 m 40 m 60 m 60 m P- hield P- hield (3) (4) P+ P+ (1).47

48 PROFIU-P - Fon T-distributor with surge protection 8-channel distributor (limiter) able gland 8-channel distributor (limiter) M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 8way Limiter branch line G tainless steel enclosure Fon PG 8way Limiter all connections PG Type Type of connection Qty. Order No. luminium housing Fon P G/M12 8way Limiter branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland 80 off on 80 off on Wiring diagram Wiring diagram DIP switches 1 2 DIP switches m 20 m 20/40/60 m 20/40/60 m 40 m 20/40/60 m 20/40/60 m 40 m 60 m 60 m P- hield P- hield P+ P+.48

49 .49

50 PROFIU-P - Fon T-distributor TEX Ex(ia) Fon distributors for Ex areas PROFIU-P T-connector The PROFIU-P installation products are increasingly used in The product range offers a wide choice of customer solutions also for use in harsh conditions. This includes standard and connection or cable gland. Weidmüller offers a solution for almost every application. If you cannot find your solution here, please contact the branch / sales office responsible for you. PROFIU-P T-connector - Ex(ia) The PROFIU-P T connector in Ex(ia) specification is intended for direct coupling of measuring devices, sensors, actuators, etc. in potentially explosive areas..50

51 PROFIU-P - Fon T-distributor TEX Ex(ia) pprovals.51

52 PROFIU-P - Fon T-distributor TEX Ex(ia) 1-channel distributor Ex able gland 1-channel distributor Ex M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 1way Ex branch line G tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon P G/M12 1way Ex branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland Wiring diagram Wiring diagram Wire jumper Wire jumper P- (3) hield (4) P+ (1) Housing P- hield P+ Housing n.c. n.c. (2).52

53 PROFIU-P - Fon T-distributor TEX Ex(ia) 2-channel distributor Ex able gland 2-channel distributor Ex M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 2way Ex branch line G tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon P G/M12 2way Ex branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland on Wiring diagram Wiring diagram Wire jumper Wire jumper P- (3) hield (4) Housing P- hield P+ Housing P+ (1) n.c. (2) n.c. n.c..53

54 PROFIU-P - Fon T-distributor TEX Ex(ia) 4-channel distributor Ex able gland 4-channel distributor Ex M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 4way Ex branch line G tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon P G/M12 4way Ex branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland Wiring diagram Wiring diagram P- (3) Wire jumper Wire jumper hield (4) P+ (1) Housing Housing n.c. (2) P- n.c. n.c. n.c. n.c. hield P+.54

55 PROFIU-P - Fon T-distributor TEX Ex(ia) 8-channel distributor Ex able gland 8-channel distributor Ex M12 connection Type Type of connection Qty. Order No. luminium housing Fon P G 8way Ex branch line G tainless steel enclosure Type Type of connection Qty. Order No. luminium housing Fon P G/M12 8way Ex branch line M tainless steel enclosure G = brass cable gland PG = plastic cable gland G = brass cable gland PG = plastic cable gland off on Wiring diagram Wiring diagram Wire jumper PE Housing P- hield P+ PE n.c. 8 P- (3) hield (4) P+ (1) n.c. (2).55

56 PROFIU-P - Fon T-distributor TEX Ex(ia) Fon bus terminator Fon bus terminator without earth connection Fon us Terminator with earth connection Fon us Terminator T 06 EEx ia II T6 EEx m II T6 Ui 17,5 V 10 Ö 30 V Ii 380 m Ta: KEM 01 TEX 1058 X 0344 II 2 G Fon us Terminator T 06 EEx ia II T6 EEx m II T6 Ui 17,5 V 10 Ö 30 V Ii 380 m Ta: KEM 01 TEX 1058 X 0344 II 2 G 49 The use of a cable lug is recommended for earthing the bus terminator Typee Qty. Order No. Fon bus terminator EEx with locking clip, without earth connection Fon bus terminator EEx without locking clip, without earth connection Typee Qty. Order No Operating temperature 40 º to 80 º Ingress protection class IP 66 Enclosure material High grade aluminium alloy (l i 12) Finish lack powder-coated onnection lead 2 x 0.14 mm 2 able entry us adapter M16 Operating temperature 40 º to 80 º Ingress protection class IP 66 Enclosure material High grade aluminium alloy (l i 12) Finish lack powder-coated onnection lead 2 x 0.14 mm 2 able entry us adapter M16 Wiring diagram Housing cover without clip-on foot Housing cover with clip-on foot able brown able white

57 .57

58 Nopen & DeviceNet - cables (M12, M8) N/DeviceNet cables one end without connector hielded Halogen Male Female Male, straight PUR/TPE PV/PV Male, angled PUR/TPE PV/PV Female, straight PUR/TPE PV/PV Female, angled PUR/TPE PV/PV 5-pole Type Order No. IL-M12G-D IL-M12G-D IL-M12W-D IL-M12W-D IL-M12G-D IL-M12G-D IL-M12W-D IL-M12W-D Other versions on request tandard cable lengths ll cables listed under the ordering data have a length of etres. The last four ordering digits must be changed when ordering other standard cable lengths. xxxxxx m xxxxxx m xxxxxx L L 10.0 m xxxxxx heathing colour black Protection class IP 67 ore cross-section 2x x 0.22 mm² Ø 14.6 L ontact surface gold-plated Temperature range of housing Ø 14.6 L Ø 14.6 Ø 14.6 hapter W includes additional technical specifications for the cable.58

59 Nopen & DeviceNet - cables (M12, M8) N/DeviceNet cables connecting cables hielded Halogen Male Female Male, straight - Female, straight PUR/TPE PV/PV Male, straight - Female, angled PUR/TPE PV/PV Male, angled - Female, angled PUR/TPE PV/PV 5-pole Type Order No. IL-M12GM12G-D IL-M12GM12G-D IL-M12GM12W-D IL-M12GM12W-D IL-M12WM12W-D IL-M12WM12W-D Other versions on request tandard cable lengths ll cables listed under the ordering data have a length of etres. The last four ordering digits must be changed when ordering other standard cable lengths. xxxxxx m xxxxxx m xxxxxx L L 10.0 m xxxxxx heathing colour black Protection class IP 67 ore cross-section 2x x 0.22 mm² Ø 14.6 L ontact surface gold-plated Temperature range of housing Ø 14.6 L Ø 14.6 Ø 14.6 hapter W includes additional technical specifications for the cable.59

60 N/DeviceNet cables - cables (M12, M8) N/DeviceNet cables onnecting cables Male Female 0.2 m 0.25 m 0.3 m 0.5 m 0.8 m 1.0 m 3.0 m 3.5 m 5.0 m 7.0 m 10.0 m 2-pole Type Order No. IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G N IL-M8GM8G-4-10-N Type Order No. Type Order No. Dimensions Operating voltage Max. 300 V peak Wire onductor: copper wire, without insulation, WG 24, 7-wire Insulation: PE 2Y Ø 9.6 Quad 4 wires according to 3.1 are stranded in group of four tranding sequence rown, green, white, yellow Wrapping Plastic foil hield raiding tin-plated copper, opt. overage 85 % Outer cladding PV, YM Electrical properties onductor resistance (at 20 ) 87 Ω/km Insulation resistance 1 GΩ x km Dielectric strength (50 Hz 1 min.) Wire/wire1000 V haracteristic impedance KHz nom Ω Operational capacity nom. 56 pf/m Mechanical characteristics Min. permitted bending radius One time: 7.5 x cable diameter Multiple times: 15 x cable diameter L* 40.1 Max. permitted tensile load resistance tatic: 50 N/mm 2 Dynamic: 20 N/mm 2 Weight pprox. 78 kg/km Thermal characteristics moving -20 to 70 tationary -40 to 70 L in the drawing is the cable length O-Ring Ø

61 N/DeviceNet cables - cables (M12, M8) Universal Pro cables The four-pole tandard M8 sensor cables are especially well suited for the Universal Pro system. With their diameter of 0.34 mm 2, these cables allow a system to be expanded up to 50 meters. The 360 shielding guarantees that signal transmission is error-free. Male Female able construction No. of poles heathing colour Material ore cross-section ontact surface Nominal voltage Rated current Protection class mbient temperature, min. mbient temperature, max. 4 grey PUR/PUR 0.34 mm 2 Gold-plated 30 V 4 IP L in the drawing is the cable length Male, straight - female, straight Female, straight - open end 0.3 m 1.0 m 3.0 m 5.0 m 10.0 m 15.0 m 20.0 m 3.0 m 5.0 m 10.0 m Type (Qty. = 1) Order No. IL-M8GM8G-4-0.3Q IL-M8GM8G-4-1.0Q IL-M8GM8G-4-1.5Q IL-M8GM8G-4-3.0Q IL-M8GM8G-4-5.0Q IL-M8GM8G-4-10Q IL-M8GM8G-4-15Q IL-M8GM8G-4-20Q IL-M8G-4-1.5Q IL-M8G-4-3.0Q IL-M8G-4-5.0Q IL-M8G-4-10Q Other versions on request Terminating resistor Dimensions Ø I END N M8 4P L Ø

62 Nopen & DeviceNet - cables (M12, M8) N/DeviceNet bulk lengths N/DeviceNet bulk lengths Male 4-pole Type Order No. IH-D-2x0.34/2x0.22-PURs omponent (1x2x0.34) T onductor Tin-plated copper 0.34 mm 2 (19 wires) according to UL 1581 Tab 20.1 Insulation Polyolefine mixture according to UL tyle V colour code: 2 conductor red/black Diameter: 1.6 ±0.1 mm ssembly Two twisted conductors + aluminium-polyester band (i exterior) Element (1x2x0.22) T onductor Tin-plated copper 0.22 mm 2 (19 wires) according to UL 1581 Tab 20.1 Insulation Polyethylene foam skin olour code: 2 conductors white/blue Diameter: approx. 2.0 mm ssembly Two twisted conductors + aluminium-polyester band (i exterior) omplete assembly Element + Element drilled Drain wire Tin-plated copper 0.34 mm 2 (19 wires) according to UL 1581 Tab 20.1 hield Tin-plated copper braiding, coverage 85 ± 5 % and Fibre band Outer cladding Polyurethane mixture according to UL tyle V olour code: black RL 9005 Marking Not required General characteristics: Nom. impedance MHz (pair 2 x 0.22 mm 2 ) ±10 % Ω Nominal power rating 800 Hz (pair 2 x 0.22 mm 2 ) - 39 pf/mt Operating voltage Low-voltage computer cable Test voltage 1000 V onductor resistance onductor : max. 55 Ω/km at 20 onductor : max. 90 Ω/km at 20 Min. bending radius 5 x D (during installation) 10 x D (during operations) Temperature range (during installation) (during operations) Reference UL 1581 ttenuation (max.) 0,5 MHz... 1,64 bd/100mt (pair 0.22 mm 2 ) 1,0 MHz... 2,30 db/100mt Max. speed 180 mt/min Max. acceleration 5 mt/s 2 opper weight 33,6 kg/km (ca.) Total weight 79 kg/km (ca.).62

63 Nopen & DeviceNet - connectors crew connection M12, metal (EM) IM / IM straight IW / IW ngled Male ocket 5-pole, PG 9 5-pole, PG 9 I-M-5/8 M12 5P -OD I-M-5/8 M12 5P -OD Other versions on request IW-M-5/8 M IW-M-5/8 M Other versions on request Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface crew connection uzn M mm (PG9) mm² V IP 67 gold-plated crew connection uzn M mm (PG9) mm² V IP 67 gold-plated able entry Ø 6 8 mm able entry Ø 6 8 mm 31.1 approx. 55 approx. 62 approx approx. 55 Ø 18.0 Ø 18.0 O 19.6 Ø 19.6 Ø 19.6 O

64 I - ables -Interface ribbon cables -Interface ribbon cable, rubber oupling module single from ribbon cable to round cable Use -Interface onnection -Interface ribbon cable olour yellow, black No. connectable cables 2 Type of cable onductor cross-section profiled cable 2 x m2 Type of cable Flexible lead cross-section ribbon cable, yellow + black m 2 Material EPDM (rubber) onnection type piercing technology Halogen-free yes Type of cable PUR solid Temperature range (at rest) onductor cross-section 0.34 mm 2 Temperature range (moving) able length 2 m Flammability class flammable Operating voltage 40 V Ozone/weather-resistant partially resistant Operating current 4 Minimum bending radii fixed: 12 mm General data Flexural properties movable: 24 mm no break after 30,000 Pollution severity DIN EN 0110 mbient temperature backward and forward movements torage temperature Housing material P 6-GF-FR hock resistance 30 g/11 ms Vibration resistance Hz; 1.0 mm amplitude pecific data Ingress protection class DIN IP 67 Weight 20 g Pin assignment Pin 1: -Interface + blue Pin 3: -Interface brown Type Designation Qty. Order No. -KG-ge Ribbon cable yellow 100 m KG-sw Ribbon cable black 100 m I-I T FR

65 I - T-piece ridge module ribbon cable oupling module ribbon cable to round cable / yellow + black (2 m) onnection -Interface No. connectable cables Type of cable Flexible lead cross-section onnection type Type of cable onductor cross-section able length Operating voltage Operating current General data Pollution severity DIN EN 0110 mbient temperature torage temperature Housing material hock resistance Vibration resistance pecific data Ingress protection class DIN Weight Pin assignment Pin 1: Pin 2: Pin 3: Pin 4: ribbon cable 2 ribbon cable, yellow + black m 2 piercing technology PUR solid 0.34 mm 2 2 m 40 V P 6-GF-FR 30 g/11 ms Hz; 1.0 mm amplitude IP g without cable -Interface + ext. power supply - -Interface ext. power supply + onnection -Interface No. connectable cables Type of cable Flexible lead cross-section onnection type Type of cable onductor cross-section able length Operating voltage Operating current General data Pollution severity DIN EN 0110 mbient temperature torage temperature Housing material hock resistance Vibration resistance pecific data Ingress protection class DIN Weight Pin assignment Pin 1: Pin 2: Pin 3: Pin 4: ribbon cable 2 ribbon cable, yellow + black m 2 piercing technology PUR solid 0.34 mm 2 2 m 40 V P 6-GF-FR 30 g/11 ms Hz; 1.0 mm amplitude IP 65 / IP g without cable -Interface + ext. power supply - -Interface ext. power supply + I-I T FF small I-I T FFR

66 Ethernet cables ssembled cable - dragline cable M12 straight ssembled cable - dragline cable M12 straight pplication: Weidmüller s dragline cable can be used wherever lines are subjected to frequent or constant movement in industrial environments - and not only in dragline applications. They are: at.5 PROFINET, PUR, M12-M m 5.0 m 10.0 m at.5 PROFINET, PUR, M12-open 3.0 m 5.0 m 10.0 m at.5 PROFINET, PUR, M12-RJ m 5.0 m 10.0 m at.5 PROFINET, PUR, M12-M12 female 3.0 m 5.0 m 10.0 m Type Order No. IE-5DD4UG0015MM-E IE-5DD4UG0030MM-E IE-5DD4UG0050MM-E IE-5DD4UG0100MM-E IE-5DD4UG0015MXXX-X IE-5DD4UG0030MXXX-X IE-5DD4UG0050MXXX-X IE-5DD4UG0100MXXX-X IE-5DD4UG0015M20-E IE-5DD4UG0030M20-E IE-5DD4UG0050M20-E IE-5DD4UG0100M20-E IE-5DD4UG0015MM-E IE-5DD4UG0030MM-E IE-5DD4UG0050MM-E IE-5DD4UG0100MM-E ccessories Transparent sleeves, 12-mm length Transparent sleeves, 18-mm length Insertion label, yellow, 12 mm Insertion label, yellow, 18 mm Type Order No. TM 4/12 HF/H TM 4/18 HF/H TM-I 12 NEUTRL GE TM-I 18 NEUTRL GE ategory at.5 (IE 11801) / at.5e (TI 568-) ross-section 4*WG 22/ mm² heath diameter mm Material sheath PUR heathing colour green (RL 6018) Insulation cross-section m Min. bending radius, repetitive 8 x conductor cross-section mbient temperature (operational) brasion resistance very good Halogen to IE Resistance to spread of flame acc. to IE Resistance to oils acc. to IE :.66

67 Ethernet cables ssembled cable - dragline cable M12 angled ssembled cable - dragline cable M12 angled pplication: Weidmüller s dragline cable can be used wherever lines are subjected to frequent or constant movement in industrial environments - and not only in dragline applications. They are: at.5 PROFINET, PUR, M12 straight-m12 angled 3.0 m 5.0 m 10.0 m at.5 PROFINET, PUR, M12 angled-m12 angled 3.0 m 5.0 m 10.0 m at.5, PUR, M12 angled-open 3.0 m 5.0 m 10.0 m Type Order No. IE-5DD4UG0015MM-E IE-5DD4UG0030MM-E IE-5DD4UG0050MM-E IE-5DD4UG0100MM-E IE-5DD4UG0015MM-E IE-5DD4UG0030MM-E IE-5DD4UG0050MM-E IE-5DD4UG0100MM-E IE-5DD4UG0015MXXX-X IE-5DD4UG0030MXXX-X IE-5DD4UG0050MXXX-X IE-5DD4UG0100MXXX-X ccessories Transparent sleeves, 12-mm length Transparent sleeves, 18-mm length Insertion label, yellow, 12 mm Insertion label, yellow, 18 mm Type Order No. TM 4/12 HF/H TM 4/18 HF/H TM-I 12 NEUTRL GE TM-I 18 NEUTRL GE ategory at.5 (IE 11801) / at.5e (TI 568-) ross-section 4*WG 22/ mm² heath diameter mm Material sheath PUR heathing colour green (RL 6018) Insulation cross-section m Min. bending radius, repetitive 8 x conductor cross-section mbient temperature (operational) brasion resistance very good Halogen to IE Resistance to spread of flame acc. to IE Resistance to oils acc. to IE :.67

68 Ethernet cables ssembled cable - railway cable M12 straight ssembled cable - railway cable M12 straight Description Weidmüller s industrial Ethernet rail cables are used on railway vehicles for both interior and exterior installations. They can connect parts which are fixed or which are occasionally in motion. In compliance with EN specifications. at.5 PUR, M12-M12 at.5, PUR, M12-open at.5 PUR, M12-M12 female 3.0 m 5.0 m 10.0 m 3.0 m 5.0 m 10.0 m 3.0 m 5.0 m 10.0 m Type Order No. IE-5D4RE0015MM-E IE-5D4RE0030MM-E IE-5D4RE0050MM-E IE-5D4RE0100MM-E IE-5D4RE0015MXXX-X IE-5D4RE0030MXXX-X IE-5D4RE0050MXXX-X IE-5D4RE0100MXXX-X IE-5D4RE0015MM-E IE-5D4RE0030MM-E IE-5D4RE0050MM-E IE-5D4RE0100MM-E ccessories Transparent sleeves, 12-mm length Transparent sleeves, 18-mm length Insertion label, yellow, 12 mm Insertion label, yellow, 18 mm Type Order No. TM 4/12 HF/H TM 4/18 HF/H TM-I 12 NEUTRL GE TM-I 18 NEUTRL GE ategory at.5 (IE 11801) / at.5e (TI 568-) ross-section 2*2*WG 22/7-2*2*0.36 mm² heath diameter mm Material sheath Radox GKW heathing colour black Insulation cross-section 1.95 mm Min. bending radius, repetitive 6.0 x conductor cross-section mbient temperature (operational) brasion resistance very good Halogen to IE Resistance to spread of flame to IE Resistance to oils acc. EN :.68

69 Ethernet cables ssembled cable - rail cable M12, angled ssembled cable - railway cable M12 angled Description Weidmüller s industrial Ethernet rail cables are used on railway vehicles for both interior and exterior installations. They can connect parts which are fixed or which are occasionally in motion. In compliance with EN specifications. at.5 PUR, M12 straight-m12 angled 3.0 m 5.0 m 10.0 m at.5, PUR, M12 angled-open 3.0 m 5.0 m 10.0 m at.5 PUR, M12 angled-m12 angled 3.0 m 5.0 m 10.0 m Type Order No. IE-5D4RE0015MM-E IE-5D4RE0030MM-E IE-5D4RE0050MM-E IE-5D4RE0100MM-E IE-5D4RE0015MXXX-X IE-5D4RE0030MXXX-X IE-5D4RE0050MXXX-X IE-5D4RE0100MXXX-X IE-5D4RE0015MM-E IE-5D4RE0030MM-E IE-5D4RE0050MM-E IE-5D4RE0100MM-E ccessories Transparent sleeves, 12-mm length Transparent sleeves, 18-mm length Insertion label, yellow, 12 mm Insertion label, yellow, 18 mm Type Order No. TM 4/12 HF/H TM 4/18 HF/H TM-I 12 NEUTRL GE TM-I 18 NEUTRL GE ategory at.5 (IE 11801) / at.5e (TI 568-) ross-section 2*2*WG 22/7-2*2*0.36 mm² heath diameter mm Material sheath Radox GKW heathing colour black Insulation cross-section 1.95 mm Min. bending radius, repetitive 6.0 x conductor cross-section mbient temperature (operational) brasion resistance very good Halogen to IE Resistance to spread of flame to IE Resistance to oils acc. EN :.69

70 Ethernet plug-in connector Tension clamp connection M12, metal (EM) D-coded Industrial Ethernet IM / IM straight IW / IW angled Male ocket 4-pole, PG 9 4-pole, PG 9 IM-4/8-M12-4P D-OD IM-4/8-M12-4P D-OD IW-4/8-M12 4P D-ZF IW-4/8-M12 4P D-ZF Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface crew connection uzn M mm (PG9) mm² V IP 67 gold-plated Tension clamp connection P M mm mm² V IP 67 gold-plated able entry Ø 6 8 mm able entry Ø 6 8 mm 31.1 approx. 55 approx. 62 approx approx. 55 Ø 18.0 Ø 18.0 O 19.6 Ø 19.6 Ø 19.6 O

71 Ethernet plug-in connector crew connection M12, metal (EM) D-coded Industrial Ethernet IM / IM straight IW angled Male ocket 4-pole, PG 9 4-pole, PG 9 IM-4/8-M12-4P D-OD IM-4/8-M12-4P D-OD IW-4/8-M12-4P D-OD Type of connection Housing main material ontact tube diameter able diameter ross-section for connected wire Rated current Rated voltage Temperature range of housing Protection class ontact surface crew connection uzn M mm (PG9) mm² V IP 67 gold-plated crew connection uzn M mm (PG9) mm² V IP 67 gold-plated able entry Ø 6 8 mm able entry Ø 6 8 mm 31.1 approx. 55 approx. 62 approx approx. 55 Ø 18.0 Ø 18.0 O 19.6 Ø 19.6 Ø 19.6 O

72 FOUNDTION Fieldbus - connector (7/8") Plug-in connector Fon 7/8" Plug-in connector straight (plug) Plug-in connector 90 (plug) ~83 ~ /8 16 UN Ø Ø Ø /8 16 UN ~50.4 ~2.0 4-pole Fon 7/8 4P M Plug-in connector straight (socket) 4-pole Fon 7/8 4P M () Plug-in connector 90 (socket) No. of poles 4 Lock crew 7/8 UNF able gland PG 9 onnection crew onnection cross-section max. 1,5 mm 2 onnection cross-section 16 WG Enclosure protection class IP 67 Mechanical service life >500 plugging cycles Upper limit temperature + 85 Lower limit temperature 40 Electrical data Rated voltage 250 V Rated surge voltage 4000 V Polution severity 3 urge category II Insulation material group III Test surge voltage 4800 V Rated current 9 (40 ) Volume resistivity 5 mω Insulation resistance > Ω Materials ontact pins uzn (brass) ~78.5 ~ ontact surface u (gold) ocket body PUR/P (UL 94 H) Enclosure cable plug PT (UL 94 V-0) Ø /8 16 UN Ø Ø 28 7/8 16 UN 1.10 ~50.4 ~2.0 Threaded ring nodised aluminium 4-pole Fon 7/8 4P FM pole Fon 7/8 4P FM ()

73 ccessories cable glands ccessories for fieldbus distributors able glands plastic IP68 able glands brass IP68 able glands brass 1/EM VG M16-1/K VG M16-1/M VG M16-M 1/EMV able glands brass EEx e, IP68 ealing rings 9005 lanking plugs brass VG M16-EXE M GWDR M16-NP VP M16-M lanking plugs plastic - EEx e Pressure compensation element plastic DE VG M16-EXE W DE M12 P short For technical data, refer to atalogue 5 Enclosures and able Glands.73