Zone manifold DN 25, DN 32, DN 50. Mounting and Operating Instructionsi
|
|
|
- Antonia Hall
- 5 years ago
- Views:
Transcription
1 Zone manifold DN 25, DN 32, DN 50 Mounting and Operating Instructionsi WOMIX Ul. Elizy Orzeszkowej Szubin tel./fax fax
2 Central heating zone manifold C60 - DN 25 Two-chamber steel distributor C 60-2, 3 or 4 circuit DN 25 was created to simplify installation of pump groups. Factory distributor is equipped with EPP insulation. In addition, the distributor has an output DN 20 F on the return side for connecting pressure vessel and the output DN 25 F on the power supply for connecting the safety group. On request, the distributor can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Max pressure: Max. power: Connection: Insulation material: 1½ M Nut 1 F directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 60 2F - DN 25 Steel ST bar 45 kw (DT 200C) Supply from boiler Zone manifold C 60 3F - DN 25 Zone manifold C 60 4F - DN 25 2
3 Central heating zone manifold C70 - DN 25 Two-chamber steel distributor C 70-2, 3, 4 or 5 circuit DN 25 was created to simplify installation of pump groups. Factory distributor is equipped with EPP insulation. In addition, the distributor has an output DN 20 F on the return side for connecting pressure vessel and the output DN 25 F on the power supply for connecting the safety group. On request, the distributor can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Max pressure: Max. power: Connection: Insulation material.: Steel ST bar 73 kw ( DT 200C) Nut 1 ½ F 1½ M directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 70 2F - DN 25 Supply from boiler 3
4 Zone manifold C 70 3F - DN 25 Zone manifold C 70 4F - DN 25 Zone manifold C 70 5F - DN 25 4
5 Central heating zone manifold C DN 25 Two-chamber steel distributor C 100-2, 3, 4, 5 or 6 circuit DN 25 was created to simplify installation of pump groups. Factory distributor is equipped with EPP insulation. In addition, the distributor has an output DN 20 F on the return side for connecting pressure vessel and the output DN 25 F on the power supply for connecting the safety group. On request, the distributor can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Warning! The exception is the distributor C 100 6F. the above-mentioned distributor can be equipped with a set of mounting brackets on the substrate (see the socket G1 "). Max pressure: Max. power: Connection: Insulation material: Zone manifold C 100 3F - DN 25 Nut 1 ½ F 1½ M directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 100 2F - DN 25 Steel ST bar 110 kw (DT 200C) Supply from boiler 5
6 Zone manifold C 100 4F - DN 25 Zone manifold C 100 5F - DN 25 Zone manifold C 100 6F - DN 25 6
7 Central heating zone manifold C DN 32 Two-chamber steel distributor C 100-2, 3, 4, 5 or 6 circuit DN 32 was created to simplify installation of pump groups DN32. Factory distributor is equipped with EPP insulation In addition, the distributor has an output DN 20 F on the return side for connecting pressure vessel and the output DN 25 F on the power supply for connecting the safety group. On request, the distributor can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Warning! The exception is the distributor C 100 6F. Divider can be equipped with a set of mounting brackets on the ground (see coupling G1 "). WARNING! To connect a group of pumps DN 32 to the manifold have to purchase additional connectors DN 1 1/4 "x 2" or connectors with integrated ball valve (see photo). Warning! The distributor can be equipped with a set of mounting brackets on the substrate (see the socket G1 "). pressure: Max. power: Podłączenie: Izolacja: Steel ST 37.1Max 8 bar 120 kw (DT 200C) GZ 1 1/4" GZ 1 1/2" directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 100 2F - DN 32 The dimension of 140 mm is available until stocks are exhausted Supply from boiler 7
8 Zone manifold C 100 3F - DN 32 Zone manifold C 100 4F - DN 32 Zone manifold C 100 5F - DN 32 Zone manifold C 100 6F - DN 32 8
9 Zone manifold C F - DN 32 Zone manifold C F - DN 32 Zone manifold C F - DN 32 Zone manifold C F - DN 32 10
10 Central heating zone manifold C DN 32 Two-chamber steel distributor C , 3, 4, 5 or 6 circuit DN 32 was created to simplify installation of pump groups. Factory distributor is equipped with EPP insulation. Additional distributor is equipped with two thermometers and two the socket ½ " F drain. WARNING! To connect a group of pumps DN 32 to the manifold have to purchase additional connectors DN 1 1/4 "x 2" or connectors with integrated ball valve (see photo). Steel ST 37.1 Max pressure: Max power: Connection: Insulation material: 6 bar 220 kw (DT 200C) 1 1/4" M 2" directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C F - DN 32 Supply from boiler Return 9
11 Central heating zone manifold C DN 50 Two-chamber steel distributor C or 3 circuit DN 50 was created to simplify installation of pump groups DN25, DN32, DN40, DN50. Factory distributor is equipped with EPP insulation. Additional distributor is equipped with two thermometers and two the socket ½ " F drain. Max pressure: Max. power: Podłączenie: Izolacja: steel ST bar 350 kw (DT 200C) 250 mm 2" M 2 1/2" directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C F - DN 50 Supply from boiler Return Zone manifold C F - DN 50 11
Zone manifold DN 25, DN 32, DN 50. Mounting and operating instructions
Zone manifold DN 25, DN 32, DN 50 Mounting and operating instructions WOMIX Sportowa 31 89-200 Szubin, Poland phone/fax +48 52 382 44 50, +48 52 382 44 51 www.womix.com.pl e-mail: export@womix.com.pl Central
Pump group DN 32 SA, SMT. Mounting and operating instruction
Pump group DN SA, SMT Mounting and operating instruction WOMIX ul. Sportowa 1 89-00 Szubin, Poland phone/fax +8 8 0, +8 8 1 www.womix.com.pl e-mail: export@womix.com.pl Pump group DN Insulation pump group
Pump group DN 25 SA, SMTC, SMT. Mounting and operating instruction
Pump group DN SA, SMTC, SMT Mounting and operating instruction WOMIX ul. Sportowa 1 89-00 Szubin, Poland phone/fax +8 8 0, +8 8 1 www.womix.com.pl e-mail: export@womix.com.pl Pump group DN Insulation pump
SINUS VERTEILER PRODUCT GUIDE
SINUS VERTEILER PRODUCT GUIDE 2017/18 heating heating & cooling & cooling systems systems 1 CUSTOMER CARE EXPORTS The product configurator Stefan Engberding Head of Exports Phone: +49 (0) 2557 / 93 93-62
Pump Stations for Heating Circuits
Pump Stations for Heating Circuits circulation pumps pump stations manifolds Regulus spol. s r.o., Czech Republic Do Koutů 897/, Praha Tel.: + 7 9, Fax: + 7 97 E-mail: sales@regulus.eu Web: www.regulus.eu
Installation and Operation Instructions HeatBloC K31 - DN 25
PAW GmbH & Co. KG Böcklerstr. 11, D-31789 Hameln Phone: +49-5151-9856-0, Fax: +49-5151-9856-98 E-mail: info@paw.eu, Web: www.paw.eu Installation and Operation Instructions HeatBloC K31 - DN 25 2015/03
VICTRIX PRO Wall-hung modular condensing boiler for heating only
PRO Wall-hung modular condensing boiler for heating only Wide range (5 models) High efficiency and low pollutant emissions thanks to condensing technology Modulating heat output from 10 to 100% Possible
K35 HeatBloC with 3-temperature mixing valve
PAW GmbH & Co. KG Böcklerstr. 11, D-31789 Hameln, Germany Phone: +49-5151-9856-0, Fax: +49-5151-9856-98 E-mail: info@paw.eu, Web: www.paw.eu Installation and Operation Instructions K35 HeatBloC with 3-temperature
Installation and Operation Instructions K38 HeatBloC - DN 32
PAW GmbH & Co. KG Böcklerstr. 11, D-31789 Hameln, Germany Phone: +49-5151-9856-0, Fax: +49-5151-9856-98 E-mail: info@paw.eu, Web: www.paw.eu Installation and Operation Instructions K38 HeatBloC - DN 32
VAILLANT SPARE PART CATALOGUE TURBOmax boilers VU 182 E, 242 E, 282 E TURBOmax combination boilers TURBOmax VUW 242 E, 282 E 8026 74 GB 09/96 View of appliances VU 182, 242, 282 E VUW 242, 282 E Content
VAILLANT SPARE PART CATALOGUE
VAILLANT SPARE PART CATALOGUE TURBOmax boilers VU 182 E, 242 E, 282 E TURBOmax combination boilers TURBOmax VUW 242 E, 282 E 8026 74 GB 09/96 View of appliances VU 182, 242, 282 E VUW 242, 282 E Content
Installation and Operation Instructions K31 HeatBloC - DN 50
PAW GmbH & Co. KG Böcklerstr. 11, 31789 Hameln, Germany Phone: +49-5151-9856-0, Fax: +49-5151-9856-98 Email: info@paw.eu, Web: www.paw.eu Installation and Operation Instructions K31 HeatBloC - DN 50 2013/05
PRESSURIZED STEEL BOILER WITH REVERSED FLAME
smoke pipes PRESSURIZED STEEL BOILER WITH REVERSED FLAME OUTPUT RANGE from 340 to 7000 WORKING TEMPERATURE minimum return temperature 55 OPERATION WITH gas or oil fired jet burners MODELS 340 420 510 630
PRODUCTS FOR HEATING AND TAP WATER SYSTEMS. Product Catalogue
PRODUCTS FOR HEATING AND TAP WATER SYSTEMS Product Catalogue Table of Contents LK Armatur - A One-Stop Supplier...5 LK 811 ThermoMat - Simple and precise... 8 Loading Units... 9 LK 810 ThermoMat 2.0 G
Spare Parts List GS 28
win ter h lter Spare Parts List GS 28 Revised 10/04 Part No. 89001367 Summary Water supply Page 1 and 2 Water inlet and dosing Page 3 and 4 Water drain and tank heating Page 5 and 6 Wash system I Page
Preassembled manifolds with flow meter, series CPRFL
Preassembled manifolds with flow meter, series CPRFL Main features - Available in the versions with : Head connections DN./4 F Side outlet connections /4 M Centre distance between the outlet connections
SOLAR THERMAL EQUIPMENT
SOLAR THERMAL EQUIPMENT 6 DIRECT FLOW CPC COLLECTOR Rhico direct flow CPC collectors are acknowledged as the market s premium product. With an extremely low heat loss and optically efficient cylindrical
Installation and Commissioning Instructions High Temperature Zone Module F31-1" (DN 25)
PAW GmbH & Co. KG Böcklerstr. 11, D-31789 Hameln, Germany Tel.: +49-5151-9856-0, Fax: +49-5151-9856-98 Email: info@paw.eu, Web: www.paw.eu Installation and Commissioning Instructions High Temperature Zone
Productinformatie BAFA.NL BAFA.NL A.U.K. MÜLLER GMBH & CO. KG
Productinformatie A.U.K. MÜLLER GMBH & CO. KG Solenoid valves Control valves Special valves and systems GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany Tel.: +49(0)211-7391-0 Fax: +49(0)211-7391-281
Guide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
Wash and rinse systems. Page 2. Various and air traps. Page 5. Drain and filter systems. Page 6. Door and hood components. Page 9
Wash and rinse systems Page Various and air traps Page 5 Drain and filter systems Page 6 Door and hood components Page 9 Electrical components Page 9 Dosing pumps Page Heating elements and boilers Page
Traction Gas Springs GZ-15 to GZ-40 (Pull Type)
Traction Gas Springs GZ- to GZ-40 (Pull ) Industrial traction gas springs are maintenance-free and ready to install. They are available ex-stock with body diameters from to 40 and forces from N to 000
CIRCULATION HEATERS SPECIFICATIONS DESCRIPTION FEATURES CH & CHP SERIES HEAT EXCHANGE AND TRANSFER, INC. 6 to 480 kw and higher. Flanged construction
SPECIFICATIONS 6 to 480 kw and higher CIRCULATION HEATERS CH & CHP SERIES Flanged construction 208 volt through 575 volt, 3 phase 5 to 40 watts/in 2 and higher NEMA 4/12 Terminal housing DESCRIPTION Type
Valves, controls + systems Stations for the connection heat generator/heating circuit
Innovation + Quality Valves, controls + systems Stations for the connection heat generator/heating circuit Product range 1 bar 0 4 OV Boiler valves With the boiler connection system, Oventrop offers all
KS Pump Stations. Engineering Submittal Sheet. Installation Sets for Collectors
Engineering Submittal Sheet Installation Sets for Collectors Layout legend S Supply from collector to storage R Return from storage to collector 1 Ball valve with thermometer and integrated gravity break
Description. Ballorex Venturi. Versions. Benefits. Robinets manuels Balancing
Ballorex Venturi Description The Ballorex Venturi is a range of manual balancing valves used in water-based heating and cooling systems to ensure an evenly distributed flow in zones, branches, risers and
KLINGER. Instructions for installation and operation of. Reflex level gauges K D asbestos-free. wt 3017/11 Page 1.
Page 1 Instructions for installation and operation of KLINGER Reflex level gauges K D asbestos-free Edition: 06/2003 Fluid Control GmbH Am Kanal 8-10 A-2352 Gumpoldskirchen/AUSTRIA Telefon:++43(0) 2252
Simplex Pump and Socket Ball Valves Pump and Socket Ball Valves
Simplex Pump and Socket Ball Valves Pump and Socket Ball Valves I Exceptional quality shut-off valves I Screw-in, press or push-fit versions I Different handle versions Our service to you I Simplex Products
Product Instructions. Mixing Station. Features. Specifications. Materials
Mixing Station The Viega Mixing Station provides supply water temperature modulation when connected to a variety of heat sources such as conventional or condensing boilers, water heaters, or geothermal
Spare parts list UC-S
Spare parts list UC-S Contents Water inlet and tank heating Water softener Water drain, Mediamat Cyclo Circulating pump Wash + rinse; bottom Wash + rinse; top Boiler Dosage Casing Cover plate, electrical
SILANOS. Spare parts suitable for: Member of the. Fax: +49 (0) Robert-Koch-Straße 3a Planegg/Munich.
pare parts suitable for: ILANO G.E.V. Großküchen-Ersatzteil-Vertrieb GmbH Phone: +49 (0)89 74557-0 Telephone: +49 (0)89-745 57-0 Robert-Koch-traße a Fax: +49 (0)89 74557-8 Großküchen-Ersatzteil-Vertrieb
Spare Parts List GS 14 / GS 15 GS 14 E / GS 15 E
win ter h lter Spare Parts List GS 14 / GS 15 GS 14 E / GS 15 E Edited: 03/97 Revised: 12/00 Part no.: 89002487 Summary Water supply Pages 1 and 2 SoftMatik (Softener) Pages 3 and 4 Tank heating and water
BCV30 DN20 - Blowdown Control Valve Installation and Maintenance Instructions
4034450/9 IM-P403-15 AB Issue 9 BCV30 DN20 - Blowdown Control Valve Installation and Maintenance Instructions 1. Safety information 2. Application 3. Technical data 4. Operation 5. Installation 6. Rotating
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 36 m 3 /h Optimal delivery head H opt 6.0 m Optimum
TECHNICAL DATA OBSOLETE
August 31, 2006 Check Valve 815a 1. PRODUCT NAME Viking Easy Riser Swing Check Valve Model E-1: Available since 1992 Model F-1: Available since 1994 2. MANUFACTURER The Viking Corporation 210 N. Industrial
in cast iron Your Life, our Quality. Worldwide. 65 Wastewater Submersible sewage pumps ( single-channel) in cast iron
Submersible sewage pumps ( singlechannel) APPLICATIONS Evacuation of civil and industrial waste waters Treating liquid manure Draining sublayer zones Generally moving foul waste liquids also containing
Ebara Submersible Sewage Pumps (Single Channel Impeller)
Ebara Submersible Sewage Pumps (Single Channel Impeller) Features and Applications Model DML 50Hz + Features! Non-clog single channel impeller Non-clog single channel impeller has 3 spherical passage and
HERZ PUMPFIX HERZ PUMPFIX. Datasheet 1 45XX XX, Issue Table of contents. Page 1. General information about HERZ PUMPFIX pump groups...
Datasheet 1 45XX XX, Issue 0216 Table of contents General information about pump groups...2 Direct (1 4510 XX)...4 DN 20 DN 25 DN 32 Mix (1 4511 XX)...6 DN 20 DN 25 DN 32 Mix with bypass (1 4511 XX)...10
CALEFFI. Direct supply unit for heating systems. 165 series 01237/17 GB. replaces dp 01237/15 GB. Function
Direct supply unit for heating systems 65 series ACCREDITED ISO 9 FM 65 CALEFFI 7/7 GB replaces dp 7/5 GB Function The direct supply unit performs the function of supplying the heating system circuits
Transmission, disassembling and assembling
Page 1 of 27 34-43 Transmission, disassembling and assembling Disassembly sequence Page 34-55. Transmission overview 1-1st gear 2-2nd gear 3-3rd gear 4-4th gear 5-5th gear 6 - Reverse gear Removing and
DMLV - DMLVF. SUBMERSIBLE SEWAGE PUMPS (VORTEX) in cast iron. Your Life, our Quality. Worldwide. 80 Wastewater
Submersible sewage pumps (vortex) APPLICATIONS Evacuation of civil and industrial waste waters Treating liquid manure Draining sub-layer zones Generally moving foul waste liquids also containing solid
Rear strut assembly - Removal and installation. A. Model 129
32-0610 Rear strut assembly - Removal and installation Preceding operations: Drain hydraulic system (32-0630). Operation no. of operation texts and work units or standard texts and flat rates 32-0780 A.
SECTION COMPRESSED-AIR PIPING FOR LABORATORY FACILITIES
Page 226113-1 SECTION 226113 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SUBMERSIBLE SEWAGE PUMPS (VORTEX) in cast iron
Submersible sewage pumps (vortex) APPLICATIONS Evacuation of civil and industrial waste waters Treating liquid manure Draining sub-layer zones Generally moving foul waste liquids also containing solid
Ballorex Venturi 3.1 Introduction
3.1 Introduction Venturi Fixed Orifice Double Regulating Valve (FODRV) DN 15-600 1/2-24 Venturi description The Venturi is a range of manual balancing valves used in water-based heating and cooling systems
Pressure Gauges. General purpose utility gauges ASME grade B 3-2-3% - Quality & Economy
Pressure Gauges General purpose utility gauges ASME grade B 3-2-3% - Quality & Economy Typical Applications: Air Conditioning, Heating & Hydraulic Systems, Sprinkler & Irrigation, Pressure Regulators,
A E R Z E N S C R E W C O M P R E S S O R S
A E R Z E N S C R E W C O M P R E S S O R S AERZEN - DELTA TWIN - Two Stage Screw Compressors Oil free compressed air technology A E R Z E N E R M A S C H I N E N F A B R I K G M B H V1-016 01 EN 2000
REKO piston compressors for trade and industry
Compressed air for all your needs! REKO piston compressors for trade and industry Druckluft für alle Fälle! Motor power: 1.5 8.0 kw mobile stationary stand-by compressors with petrol-engine RENNER compressors
Fusion-bonded plate heat exchangers
Fusion-bonded plate heat exchangers Fusion-bonded plate heat exchangers Technical specifications AlfaNova range Many of Alfa Laval s fusion-bonded plate heat exchangers are available directly from stock
FRS/BRZ Air Oil Separator (AOS) Installation Manual
FRS/BRZ Air Oil Separator (AOS) Installation Manual Eric Hazen Rev. 2 Overview: Detailed instructions on installing the AOS for the FRS/BRZ/GT86. Difficulty: Beginner Time required: 1-3 hours depending
SECTION GENERAL-SERVICE AIR COMPRESSOR PART 1 - GENERAL
13686.00 GENERAL SERVICE AIR COMPRESSOR 221519-1 SECTION 22 1519 - GENERAL-SERVICE AIR COMPRESSOR 1.1 RELATED DOCUMENTS PART 1 - GENERAL A. Drawings and general provisions of the Contract, including General
MODEL UC50e PARTS MANUAL Rev 1.01A
MODEL UC50e PARTS MANUAL Rev 1.01A DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS
Conversion from Standard Irrigator Fuel Tank to 6-Gallon Tank, Kit #71030 MAN102. Irrigator S/N Up to:
Conversion from Standard Irrigator Fuel Tank to 6-Gallon Tank, Kit #71030 MAN102 Irrigator S/N Up to: 509999 June 2007 2007 Updated October 2012 Reel Rain Traveler Systems and associated parts are manufactured
SUBMERSIBLE ELECTRIC PUMPS FOR FOUL WASTE WATER (SINGLE CHANNEL) in cast iron
Submersible electric pumps for foul water. APPLICATIONS Evacuation of civil and industrial waste water Effluent treatment Draining underground areas Handling fluids containing suspended solids / filaments
Pneumatic Controller for Temperature. Type Pneumatic Controller for Temperature. Type Mounting and Operating Instructions EB 7065 EN
Pneumatic Controller for Temperature Type 3301 Pneumatic Controller for Temperature Type 301-1 Mounting and Operating Instructions EB 7065 EN Edition January 2014 Definition of the signal words used in
AKG-A/AKGS-A. Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
Spare parts list GS 640 / GS 650
Spare parts list GS 640 / GS 650 Contents Water inlet GS 640:...814 318; GS 650:...813 826 Page Water inlet GS 640: 814 319...; GS 650: 813 827... Page Tank and tank heating Page Water drain, Mediamat
SUBMERSIBLE ELECTRIC PUMPS FOR FOUL WASTE WATER (VORTEX) in cast iron
) Submersible electric pumps for foul waste water, cast iron. APPLICATIONS Evacuation of civil and industrial waste water Effluent treatment Draining underground areas Handling fluids containing suspended
VIESMANN VITOTRANS 100 Plate heat exchanger
VIESMANN VITOTRANS 100 Plate heat exchanger Datasheet Part numbers and prices: see pricelist VITOTRANS 100 Type PWT For transfer stations from heat supply networks, for system separation in heating systems
Globo P. Ball valves Pump ball valve made of gunmetal
Globo Ball valves ump ball valve made of gunmetal IMI EIMEIER / Shut-off valves / Globo Globo Globo and Globo -S are used in pump warm water heating systems for direct connection to circulating pumps with
Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
AKG-A/AKGS-A. Type Series Booklet
AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Pressure seal bonnet Flanged/Butt Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A KSB Aktiengesellschaft Pegnitz All rights
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically
Side channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
PRESSURE RELIEF VALVE CONTROL VALVE
PRESSURE RELIEF VALVE CONTROL VALVE LEHRY Pressure Relief Valve, Sustaining or Backpressure Control Valve is designed to permitting flow when upstream pressure is above the adjustable setpoint of the control
savings flexibility recyclable LIGHTNESS FULL FLOW MECHANICAL STRENGTH IMPROVE CONTROL TECHNICAL BROCHURE aesthetic performance CHANGE
TECHNICAL BROCHURE aesthetic performance flexibility thermal comfort PREMIUM QUALITY MECHANICAL STRENGTH IMPROVE CHANGE LIGHTNESS savings high resistance to corrosion low and high temperature systems FULL
MODEL GLC PARTS MANUAL REV.1.02A
Owner s Manual Keep with machine for reference MODEL GLC PARTS MANUAL REV.1.02A CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-8 95-2 141 MODEL GL-C Parts MANUAL
Pneumatic Screw-in Temperature Controllers
Pneumatic Screw-in Temperature Controllers Operating Instruction Edition October 2002 Table of content 1 Safety instructions 5 Pneumatic Screw-in Temperature Controllers 5.1 Applications and principles
R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition
with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,
Edition 2 July Air Impact Wrench. 2934P2 and 2940P2. Parts Information. Save These Instructions
04584470 Edition 2 July 2008 Air Impact Wrench 2934P2 and 2940P2 Parts Information Save These Instructions 2934P2 and 2940P2 Air Impact Wrench Exploded Diagram 60 59 16 18 10 15 9 8 7 6 5 4 14 1 13 3 2
BD Adjustable Track Bar. Ford Model F250,F350,F450,F550-4WD Ford Model F450,F550 2WD P/N#
16 April 2013 1032110 Ford Adjustable Trackbar 1 BD Adjustable Track Bar Ford Model F250,F350,F450,F550-4WD 2005-2013 Ford Model F450,F550 2WD 2005-2013 P/N# 1032110 UPLEASE READ ALL INSTRUCTIONS BEFORE
Inspection boxes and accessories
06 Inspection boxes and accessories 06 Metal inspection boxes 159 TUTTO plastic inspection boxes 163 page METAL INSPECTION BOXES 16 Sheet steel boxes and compatible manifolds In order to make box selection
Form Edition 1 November Air Impact Wrench. 2934P2 and 2940P2. Parts Information. Save These Instructions
Form 04584470 Edition 1 November 2004 Air Impact Wrench 2934P2 and 2940P2 Parts Information Save These Instructions 2934P2, and 2940P2 Air Impact Wrench Exploded Diagram (Dwg. TPA1337-1) 2 Form 04584470-Edition
Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory)
MAKING MODERN LIVING POSSIBLE Data sheet Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory) A CPCE hot gas bypass regulator is used to adapt compressor capacity to actual evaporator
MODEL UC50e PARTS MANUAL Rev 1.02B
MODEL UC50e PARTS MANUAL Rev 1.02B DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS
Easy Riser swing check valve Models E-1 & F-1
Page 1 of 7 1. DESCRIPTION The Viking Easy Riser Swing Check Valve is a general purpose rubber-faced approved for use in fire service systems. The valve is for use in wet system risers, preaction system
Profile Spraying Machine, Makor Model IRIDE 206/W (Modified)
TECH SPEC PAGE 1 Profile Spraying Machine, Makor Model IRIDE 206/W (Modified) The spraying machine IRIDE 206 has been designed for the protection of the work environment, and built to satisfy present-day
CLASSEQ LTD. Spares manual D400
CLASSEQ LTD Spares manual D400 Spares manual 03/01/2017 Spares manual Page 1 D400 Table of contents for D400 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly... 7 4. Control
TECHNICAL DATA OBSOLETE
April 4, 2008 32a 1. DESCRIPTION Viking EasyPac Floor Control Riser Manifold Assemblies are available in sizes 1-1/4, 1-1/2, 2, and 2-1/2 for commercial use, in high rise buidlings requiring floor control
CLASSEQ LTD. Spares manual G400
CLASSEQ LTD Spares manual G400 Spares manual 03/01/2017 Spares manual Page 1 G400 Table of contents for G400 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly... 7 4. Control
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES INC. VALVES, INC HYDRAULIC CONTROL VALVES WORKING PRINCIPALS It is automatic hydraulic control valve designed for make desired modulation processes in main valve network line as
Instruction Sheet. Variable Speed - Setpoint (00-VS) 00 and Load Match Cartridge Circulators
Instruction Sheet Variable Speed - Setpoint (00-VS) 00 and Load Match Cartridge Circulators 02-3 SUPERSEDES: May, 200 EFFECTIVE: October, 200 Plant ID# 00-38 The Variable Speed - Setpoint 00 Cartridge
CLASSEQ LTD. Spares manual D500
CLASSEQ LTD Spares manual D500 Spares manual 03/01/2017 Spares manual Page 1 D500 Table of contents for D500 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly... 7 4. Control
M Installation Guide. PRECISION Manifold Series. Introduction. A. Assemble Manifold Components
Page 1 Introduction The M-8200 Precision Manifolds are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options with
CLASSEQ LTD. Spares manual G400 DUO
CLASSEQ LTD Spares manual G400 DUO Spares manual 03/01/2017 Spares manual Page 1 G400 DUO Table of contents for G400 DUO 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly...
NORI 320 ZXSV Type Series Booklet
Globe Valve NORI 320 ZXSV PN 250-320 DN 10-50 Type Series Booklet Legal information/copyright Type Series Booklet NORI 320 ZXSV All rights reserved. The contents provided herein must neither be distributed,
Mounting and Operating Instructions EB 8111/8112 EN. Series V2001 Valves Type 3321 Globe Valve
Series V2001 Valves Type 3321 Globe Valve Type 3321 Globe Valve with rod-type yoke and Type 3372 Electropneumatic Actuator (350 cm²) Mounting and Operating Instructions EB 8111/8112 EN Edition June 2013
Screw Compressors CPF and CPVS People. Passion. Performance.
Screw Compressors CPF 175-340 and CPVS 175-250 People. Passion. Performance. People. Passion. Performance. Define your needs, our broad For Chicago Pneumatic, it isn t just about products. We value our
HYDRAULIC SEPARATOR PRODUCTION RANGE. Code Size Max. flow rate (l/h) " "1/ "1/ " 8.
HYDRAULIC SEPARATOR CT0617.0_03 EN March 2016 o o o Threaded versions equipped with flat seat F union connections, therefore, easy installation and/or maintenance; Self-cleaning: Dirt separator equipped
CLASSEQ LTD. Spares manual D400 DUO
CLASSEQ LTD Spares manual D400 DUO Spares manual 03/01/2017 Spares manual Page 1 D400 DUO Table of contents for D400 DUO 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly...
Thermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications Sanitary applications Food industry Beverage industry Bio and pharmaceutical industry,
Installation instruction
1 Safety Before installing the device, please read this manual carefully. Please note that the installation must be executed according to relevant technical rules. The installation must also be adapted
MASTER DIRECT OIL HEATERS. MODEL 35 CED 10 kw Model ILLUSTRATED PARTS BREAKDOWN. Motor and Pump Assembly
MODEL 35 CED 10 kw Model ILLUSTRATED PARTS BREAKDOWN 3 1 2 4 5 11-5 11-1 11-2 6 7 8 11 15 11-4 23 13 41 16 17 11-3 18 1 24 20 33 34 27 3 43 25 31 37 2 30 28 26 42 35 12 32 18-1 18-2 18-18 36 18-4 18-5
MANIFOLDS AND DISTRIBUTION EQUIPMENT
MANIFOLDS AND DISTRIBUTION EQUIPMENT - Radiators distribution equipment... 52 - Components for radiators... 57 - Underfloor heating/cooling distribution equipment... 58 - Modular manifolds... 60 - Components
DML - DMLF. SUBMERSIBLE SEWAGE PUMPS (SINGLE-CHANNEL) in cast iron. Your Life, our Quality. Worldwide. 67 Wastewater APPLICATIONS TECHNICAL DETAILS
APPLICATIONS TECHNICAL DETAILS TECHNICAL DATA 40 mm (DMLF) DN50, DN55, DN65 (DMLF) MATERIALS ACCESSORIES (ON REQUEST) PUMP IDENTIFICATION CODE 80 DML DMLF 5 2,2 50 HZ 2,2 3,7 5,5 7,5 11 15 22 MODEL OUTPUT
WASTEWATER SUBMERSIBLE MOTOR PUMP MODEL DML3
WASTEWATER SUBMERSIBLE MOTOR PUMP MODEL DML3 TECHNICAL DATA BOOK EBARA Corporation EBARA DENSAN (TAIWAN) MFG. CO., LTD. September, 208 EBARA Sewage Pump Table of Contents. Specifications 2. Performance
High-speed Centrifugal Pump according to API 610
EGS-L, EGS-W Series High-speed Centrifugal Pump according to API 610 Capacity: 2~90 m 3 /h (50Hz) 2.4~108 m 3 /h (60Hz) Head: up to 1500 m (50Hz) up to 2160 m (60Hz) Pressure: EGS-L: up to 15 MPa, EGS-W:
QOF-2/3/5/7.5. Parts Manual. Direct Drive Oil-free scroll compressors. Manual No November 2014 Edition
QOF-2/3/5/7.5 Direct Drive Oil-free scroll compressors Parts Manual This manual contains important safety information and should be made available to all personnel who operate and/or maintain this product.
Screw Pump Twin Aggregates Series SPZ/M MagDrive
Screw Pump Twin Aggregates Series SPZ/M MagDrive Application For the delivery of fuel oils, hydraulic oils or other lubricating liquids. The fluid media must not contain any abrasive particles nor attack
INSTRUCTIONS AND PARTS LIST FOR MODEL FORCE 10DA and FORCE 25DA (Double Acting, Electrically-Operated Hydraulic Press)
INSTRUCTIONS AND PARTS LIST FOR MODEL FORCE 10DA and FORCE 25DA (Double Acting, Electrically-Operated Hydraulic Press) Operation 1. Plug power cord into a 115-volt A.C. single phase 60-cycle grounded,