Mini-Trim Switches. Typical Dimensions. Mini-Trim Toggles. 2-way, 4-way, 4-way plus pushbutton, and 8-way toggle switches
|
|
|
- Meagan West
- 5 years ago
- Views:
Transcription
1 MT Mini-Trim Mini-Trim Switches OTTO Mini-Trims are toggle switches available in 2-way, 4-way, 4-way plus pushbutton, and 8-way versions. Numerous button styles are available on both the and Grade switch versions. Mini-Trims are typically press-fit into control grips or panel mounted using versions with an 11/16" threaded case. Mini-Trims are also available with multiple sealing levels to fit all applications. Standard Characteristics/Ratings: OPERATIONAL: Circuit: Contact made in opposite direction of lever travel. Electrical: 1 amp 28VDC for 100,000 cycles. Dielectric Withstand: 1050 Vrms Temperature Range: -55 C to +85 C Lever Travel: 15 max. from center off. Actuating Force: 16 ± 8 oz. Lever Pivot & Stop Strength: Switch is capable of withstanding a force of 20 lbs. applied to the actuating button. Button also withstands 15 lbs. minimum pull force. Switch Body: thermoplastic. Case: anodized aluminum. Button: Thermoplastic. Bat Handles: Stainless steel. Mounting Hardware for Case Versions: Hex nut & internal tooth lockwasher. Seal: and dusttight to IP64 and M8805 Design 2 or watertight to IP68. Typical Dimensions Body T1 T4 T5 T8 54
2 Mini-Trim Switches T1 2-Way T Way Jog T Way Jog T Way Jog T Way Jog T Tall Jog T Gray Tall Jog T Rocker T Red Rocker 55
3 T4 4-Way Mini-Trim Switches T Plain T Plain Watertight T Plain T Plain T Plain T Plain & LL T LRUD T LRUD T IOUD T Gray IOUD T IOUD Resilient (QPL M9419/2-003) 56
4 Mini-Trim Switches T4 4-Way T Cone (QPL M9419/2-004) T Gray Cone T Cone T Cone T (QPL M9419/2-001) T Gray T Resilient (QPL 9419/2-002) T T T Watertight T T Castle T Castle T Gray Castle T Gray Castle T Castle Watertight T Way Jog T Way Jog T Gray 4-Way Jog 57
5 T4 4-Way Mini-Trim Switches T Short Bat T Short Bat T Bat T Bat Resilient (QPL M9419/2-005) T Bat T Bat T Bat T Bat w/o Arrows T Bat w/o Arrows T Square Post T Square Post (QPL M9419/2-006) T Square Post T Square Post T Square Post T Post T Post 58
6 Mini-Trim Switches T5 4-Way with Pushbutton T T T T LRUD T LRUD 59
7 T8 8-Way Mini-Trim Switches T Plain T T Bat MINI-TRIM SERIES CATALOG CODE XX X X X X X X SERIES GRADE BUTTON STYLE CASE STYLE SEAL LEVEL CURRENT RATING BUTTON COLOR T1-2-Way M. A. 2-Way Jog Dusttight and 1. Standard 1. Red T4-4-Way C. B. Tall Jog Low Level 2. T5-4-Way Plus C. Rocker Per IP64 8. Gray Center D. Cone 2. Watertight N. Not Applicable Pushbutton E. LRUD Per IP68 Use When T8-8-Way F. IOUD Specifying G. Button Styles H. L, M, N, & P. J. Castle K. 4-Way Jog L. Short Bat M. Bat N. Post P Post Consult Factory For Colors Not Listed. 60
8 Otto Controls T4 Mini-Trim Switches 4-Way T T T T T T Plain Plain Plain Plain Plain Plain Watertight & LL T T LRUD LRUD T T T IOUD Gray IOUD IOUD Resilient (QPL M9419/2-003) T Cone T Gray Cone T Cone T Cone (QPL M9419/2-004) T T T Gray Resilient (QPL M9419/2-001) (QPL 9419/2-002)
9 Otto Controls T T T T Watertight T Castle T Castle T Gray Castle T Gray Castle T Castle Watertight T T T Way Jog 4-Way Jog Gray 4-Way Jog T Short Bat T Short Bat T Bat T Bat Resilient T Bat T Bat T Bat (QPL M9419/2-005) T T Bat w/o Arrows Bat w/o Arrows
10 Otto Controls T Square Post T Square Post T Square Post T Square Post T Square Post (QPL M9419/2-006) T T Post 4-40 Post 2 East Main Street Carpentersville, IL Phone: Fax: info@ottoeng.com
SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive)
SWITCH SELECTION GUIDE Trim Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive) MT T1 Quiet Operation, Momentary 10mA @ 5VDC IP64, IP68S 11/16 dia. Threaded SPST (x2)
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
G3 UNIVERSAL GRIP CONFIGURATION GUIDE
G3 UNIVERSAL GRIP CONFIGURATION GUIDE www.ottoexcellence.com Industrial Grips for Demanding Applications OTTO serves agriculture, construction, off-highway, material handling and specialized industrial
ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
APPENDIX TOGGLE HARDWARE STANDARD ASSEMBLY CONFIGURATION MIL-DTL-5423/16E WHEN USING PANEL SEALS. Note: Not applicable with all configurations.
AP TOGGLE HARDWARE STANDARD ASSEMBLY ONFIGURATION WHEN USING PANEL SEALS MIL-DTL-54/6E 7 February 009 SUPERSEDING MIL-DTL-54/6D AMENDMENT May 00 MIL-DTL-54/6E Note: Not applicable with all configurations.
onlinecomponents.com
McGILL SWITCHES Contents Introduction......................................................................... 213 McGill Rocker Switches................................................................
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
MS-Series. Circuit Breaker
MS-Series Circuit Breaker Carling Technologies MS-Series Sealed Toggle Circuit Breaker was designed and tested to operate flawlessly in the harshest of environments. Ideally suited for COTS (commercial
Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
MINIATURE POSITIVE ACTION SWITCHES MIL-S-8834 Miniature Positive Action Switches Solder Lug Terminals
MINIATURE POSITIVE ACTI SWITCHES FEATURES Sealed bushing Current rating versatility 1 and 2 pole circuitry Non-teasible mechanism for all but center "" circuits Dry circuit (logic level loads) to power
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
Hall Effect Switches. Specifications Subject To Change Without Notice 1 Phone: +44(0)
Hall Effect Switches www.is-rayfast.com sales@is-rayfast.com 1 Phone: +44() 1793 6167 HFNR RCKER FRWARD/NEUTRAL/REVERSE RCKER 3-PSITIN ANALG UTPUT RCKER WITH BACKLIGHTING Standard Characteristics/Ratings:
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
Milestone Equipment & Supplies Recommended Tornado-Karcher Parts Inventory
Milestone Equipment & Supplies 630-247-0801 www.mestornado.com Recommended Tornado-Karcher Parts Inventory FLOOR MACHINES ES SERIES 01608 Ring-hog 2 03470 Ring, retaining 2 07536 Screw 2 06685 Switch,
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
Multiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164
162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of
5000 SERIES - MINIATURE TOGGLE SWITCHES
000 SERES - MNATURE TOGGLE SWTCHES A SPECFCATONS SUBJECT TO CHANGE WTHOUT NOTCE FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, PDT & PDT models with numerous options. Numerous configurations
Optolite Products. Press to Test Type Incandescent Miniature General Purpose Size T-1 ¾
tube and nuts, aluminum, black anodized per steel. Brass terminals, tin plated per per L-P-349. See Selection Guide. hole.500 in. ±015 in. dia. Approximately.4 oz. less lamp. 03-91080 Type General Purpose
Rack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
product manual H-1240 & H F Electric Penetrometer with Digital Automatic Timer
07.09 product manual H-1240 & H-1240.4F Electric Penetrometer with Digital Automatic Timer Introduction The Humboldt Electric Automatic Penetrometer is of rugged construction, but requires careful handling
Fuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
10260 Retrofit to 10260A Non-Contact Sensor Instructions Kits through -512
10260 Retrofit to 10260A Non-Contact Sensor Instructions Kits 51404974-501 through -512 Document Number Form: 62-86-33-16D Effective: 3-1-01 Supersedes: 11-00 Summary Retrofitting your 10260 actuator from
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
AV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
Table of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
Sealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
MODEL DESCRIPTION IN LBS.
QUIC-RELEASE Oxygen Tank System Model QR-OTS- -U Parts and Mounting Information ZICO 00PM0 Rev. --7 Model QR-OTS-U allows you to mount any "M" through "J" cylinder. The system uses a QR-MV Multiversal
Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
Common features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
AV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part # 891-653C (Gandy Part #62270) Mount & Deflector Package For Great Plains Turbo-Max 24/30 Ft Models 2400 (24-Ft)
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINIATURE TOGGLE SWITCHES K FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
1.2. Pushbuttons and Indicating Lights. Contents Description Environmentally Sealed Toggle Switches E10E Product Selection
Toggle Switches E0E Contents Description Product Selection Molded-In Screw Terminal............. Econoswitch................................................ Technical Data and Specifications..........
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
General Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
DM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
KX Series Precision Sine Switches
Precision Sine Switches FEATURES Hermetic seal provides exceptional operational freedom from environmental conditions Compactly designed to fit small, narrow spaces Available with either screw or solder
The Highest Quality Heavy Duty Vehicular Electrical Switches and Components at Competitive Prices
The Highest Quality Heavy Duty Vehicular Electrical Switches and Components at Competitive Prices UCOM INC was created in 1994 to fill a specific niche in the marketplace. We specialize in providing the
Toggle Switches. 214 Switches. Nylon and Metal switch variants. Multiple Lever Options. Ratings up to 20A, 250V ac - 277V ac
Toggle Switches Well known for their quality and reliability, Bulgin s toggle switches are cost effective solutions to many existing applications. These switches offer features at an attractive price point
Parts Catalog SLICING MACHINES
Parts Catalog Model 4600P SLICING MACHINES MODELS: 4600P, 4975P & 493 05-0-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
DETAIL SPECIFICATION SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES
INCH-POUND MIL-DTL-83731/1B July 010 SUPERSEDING MIL-S-83731/1A 0 March 1987 DETAIL SPECIFICATI SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES Inactive for
Pushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
PNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
Ledex Rotary Solenoids Modifications and Custom Capabilities
Ledex Rotary Solenoids Modifications and Custom Capabilities Modifications and Customized Units For modifications including heavy duty return springs, drive pins, etc. please contact our application engineers
Section D CAPPING - UOS/VOS/PVC & GUTTERS - ABS/PVC
Section D CAPPING - UOS/VOS/PVC & GUTTERS - ABS/PVC January 1996 1D Index 1. 84-200108-002 Return Capping Coupler 2. 52-100207-000 Grommet Nut 3. 11-086365-003 C.R. Flat Hd. Tapping Screw (#8-18 x 3/4")
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
Basic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing
R Basic Switch Style Inductive Prox General-purpose Inductive Prox in a Basic Switch Housing H Mounting pitch compatible with that of a mechanical basic switch H Wide operating voltage range: 10 to 30
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
909/1 SERIES SLICER TECHNICAL MANUAL
The Choice of Experience 909/1 SERIES SLICER TECHNICAL MANUAL SPECIFICATION SHEET INSTALLATION INSTRUCTIONS OPERATION INSTRUCTIONS CLEANING INSTRUCTIONS MAINTENANCE INSTRUCTIONS TROUBLE SHOOTING INSTRUCTIONS
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
Tailgates By THIEMAN M16, 20, 25, 30 MLB16, 20, 25, 30 INSTALLATION INSTRUCTIONS
STOWAWAY Tailgates By THIEMAN M16, 20, 25, 30 MLB16, 20, 25, 30 INSTALLATION INSTRUCTIONS M-25 shown! IMPORTANT! KEEP IN VEHICLE! PLEASE READ AND UNDERSTAND THE CONTENTS OF THIS MANUAL BEFORE OPERATING
TF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
MICRO SWITCH ESS SERIES
MICRO SWITCH ESS SERIES FEATURES Small compact size suitable for electric equipment appliances and P.C.B. layout 2-piece spring mechanism design offering durable acute operation and long life Heavy/Light
Parts Catalog Issued: Mar 12, Comet Rocket. Wheelchairs
Parts Catalog Issued: Mar 2, 208 Comet Rocket Wheelchairs Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for.
IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
CATALOG OF REPLACEMENT PARTS SLICERS (INCLUDES MOTOR PARTS) A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS SLICERS (INCLUDES MOTOR PARTS) 2912PS 2912SC ML-104966 ML-104965 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 34655 (Apr. 2001) 7-8-9-10 5-6
Sharpener Assembly Parts List
Sharpener Assembly Parts List Item Description Part Number sharpener assy. w/o cover 4675-00851 N/S sharpener assy. w/ cover assy. no upper guard 4675-00853 **sharpener assy. w/ cover assy. & upper guard
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
Transfer Valve Actuator Overhaul Instructions
Rotary Style Transfer Valve Actuators Overhaul Instructions Form No. F-1031 Section 2315 Issue Date 12/10/99 Rev. Date 11/02/11 Table of Contents Introduction.................................. 1 Safety
D Series Miniature Snap-in Power Rocker Switches
Miniature Snap-in Power Switches Features/Benefits Momentary and maintained models PC and quick connect terminals Recessed bracket available prevents accidental actuation RoS compliant Typical Applications
Environment-Sealed Basic Switches
HoneywellSensing and Control 1-800-537-6945 USA 1-815-235-6847International 1-416-293-8111Canada 13 Environment-Sealed Basic Switches GENERAL INFORMATION SE and XE switches are the smallest environment-sealed
Early Birds Your GM Muscle Car Headquarters
Early Birds Your GM Muscle Car Headquarters 1 800 463 0546 Visit www.early-birds.ca for most up-to-date catalog this copy was generated November 11 2018 Camaro / 1st Generation Camaro (1967-1969) / Transmission
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
S2VT Valve Configuration Guide
Doc DM 90 S2VT Valve Configuration Guide Kits and Products for Every Type of RV Application 20 Jan 2017 DM90-2 Page 1 of 15 S2VT Starter Kit DM PN: 5885-DM20-S2VT Provides everything to install 1 Valve
1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24