Hall Effect Switches. Specifications Subject To Change Without Notice 1 Phone: +44(0)

Transcription

1 Hall Effect Switches 1 Phone: +44()

2 HFNR RCKER FRWARD/NEUTRAL/REVERSE RCKER 3-PSITIN ANALG UTPUT RCKER WITH BACKLIGHTING Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: 3,, full forward to full back Angle of Throw Between Adjacent Positions: 1 degrees typical Max Allowable Radial Load: 3. lbs. The HFNR is compact, robust and reliable, ideal for grip or panel mount applications. This 3-position switch provides operator comfort by reducing the movement required to change direction or switch gears. Backlighting provides enhanced visibility; making them easy to see in poor lighting or nighttime operation. The electronics are sealed to IP68S and the switch has excellent EMI/RFI immunity; it withstands RFI of 1V/M, 14Hz to 1GHz EMI withstanding per MIL-STD-461D/SAE J , and a mechanical life of three million cycles. Features: 3 million cycle life, full forward to full backward Hall effect contactless sensing technology Choice of bezel and button colors 2V to 24V LED backlighting options Electronics sealed to IP68S utstanding EMI/RFI immunity Snap-in panel mounting accepts multiple panel thicknesses RoHS/WEEE/Reach compliant ELECTRICAL RATINGS: Electrical Units Min Typ Max Supply Voltage VDC utput Voltage, Tolerance VDC -.35 N/A +.35 at 5V Vcc utput Voltage, Tolerance VDC -.35 N/A +.35 at Full 5V Vcc Supply Current Per Sensor ma N/A N/A 1 ELECTRNICS: Seal Integrity: Electronics sealed to IP68S ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F minimum integrity Sand/Dust: Per SAE J1455 EMI: Withstand per MIL-STD-461D/SAE J RFI: Withstand 1V/M, 14Hz to 1GHz MATERIALS: Button: Bezel: Mounting Hardware: Thermoplastic Thermoplastic None provided sales@is-rayfast.com 2 Phone: +44()

3 FRWARD/NEUTRAL/REVERSE RCKER HFNR RCKER 3-PSITIN ANALG UTPUT RCKER WITH BACKLIGHTING HFNR PART NUMBER CDE HFNR X X X X X X X X X Light Source ➀ utput 1 ➁ utput 2 Wiring ption perating Force Direction 1 & 2 to Center/ Center to Direction 1 & 2 Button Style Termination Bezel Color ➂ Button Color ➂ FNR Legend A. NNE B. 2V Green LED C. 2V Amber LED D. 5V Green LED E. 5V Amber LED F. 12V Green LED G. 12V Amber LED H. 24V Green LED J. 24V Amber LED A. //.5VDC B. //.5VDC C. //.5VDC D. //VDC E. //VDC F. //VDC G. //VDC H. //VDC NNE ➃ //.5VDC.5//VDC NNE ➃ //VDC //VDC //VDC //VDC 1. Common Power and Ground ➃ 2. Separate Power and Ground /3.6 lbs. 1. Rocker A. 2 AWG Wires 18.3 Long, Stripped and Tinned Ends 1. Red 2. Black 4. Yellow 6. Blue 8. Gray 1. Red 2. Black ➀ 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White A. NNE B. FNR/White ➀ ➀ nly button color black is available on backlit version; only legend color translucent white is available on backlit version. ➁ utputs are when switch is in detented position. ➂ Minimum lot charges may apply for certain color options. ➃ For single output switches, wiring option 1 should be selected. sales@is-rayfast.com 3 Phone: +44()

4 HJFC FT PEDAL FT PEDAL 9 MILLIN LIFE CYCLE The HJFC Hall Effect Foot Pedal is built to perform under the worst possible conditions. The unique design places Hall effect sensors and electronics behind a solid plastic diaphragm that separates the top and bottom halves of the front pedal, sealing the electronics in an IP68S rated enclosure. The bottom half of the pedal utilizes the same proven contactless analog output Hall effect technology used in TT joysticks and is available in J1939 and CANopen formats. The CAN interface provides three analog input channels, 12 digital input channels, two digital output channels and I/ extension for up to 4 digital input channels, eight analog input channels and 4 digit output channels by means of I²C interface. It will withstand operating temperature extremes of -4 C to +85 C, is sealed to IP68S immersion requirements and passes EMI/RFI immunity testing to 1V/M. The HJFC Hall Effect Foot Pedal provides a life of nine million cycles. The pedal s pivot point itself is also sealed against large debris. Customer specified features such as pretravel (dead band) and overtravel, along with a minimum and maximum output, are programmable. The sensor programming is completed in automated fixtures during assembly ensuring tight output tolerances. The HJFC Hall Effect Foot Pedal offers more performance features and a higher cycle and seal rating than any other foot pedal on the market. Features: utstanding EMI/RFI immunity Heavy gauge, corrosion-resistant metal Proven contactless analog output Hall effect technology J1939 CANopen formats available Life expectancy of 9 million cycles Hall sensors & electronics are sealed against the elements, behind a solid plastic diaphragm that separates the top & bottom halves of the foot pedal Electronics are sealed to IP68S Pedal pivot point sealed against large debris Programmable pretravel (dead band) & overtravel along with minimum & maximum output Sensor programming is completed in automated fixtures during assembly ensuring tight output tolerances Reverse polarity protection available RoHS/WEEE/Reach compliant Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: Vibration: ANGLE: Degrees: perating Force (lbs.): Electrical Life: 9,, cycles 1g 1Hz to 2KHz swept sinusoidal Bidirectional Foot Pedal 13 nominal dual direction, 15 nominal single direction 1 lbs. typical -4 C to +85 C at load reference point 9,, cycles ELECTRICAL RATINGS: Electrical Units Min Typ Max Supply Current Per Sensor ma N/A N/A 1 utput Resistance (lo -2mA) Ω N/A 1 N/A Analog Supply Voltage (ption 1) VDC Analog Supply Voltage (ption 2) VDC Analog utput Voltage Tolerance VDC -.15 N/A +.15 at Center (see graph for output 5V Vcc Analog utput Voltage Tolerance VDC -.15 N/A +.15 at Full Travel (see graph for output values) Limit Switch Supply Voltage V 5 N/A 3 (if applicable) Limit Switch Actuation (if applicable) Degrees Analog utput Pretravel Degrees Analog utput vertravel Degrees Note: Limit switch outputs will source limit switch supply voltage when actuated. ELECTRNICS: Seal Integrity: Electronics IP68S RFI: Withstand 1V/M, 14KHz to 1GHz (excludes output options 3 & 5) EMC: Withstand per MIL-STD-46 ID/SAE J ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Storage Temp Range: -65 C to +15 C Humidity: 96% RH, 7 C, 96 hours Sand/Dust: Withstand per SAE J1455 MATERIALS: Foot Pedal Plate: Housing: Cable: Mounting Hardware: Plated steel Glass filled thermoplastic 22 AWG (19 strands of 34 AWG TSC) PVC/Polyurethane blend outer jacket None provided sales@is-rayfast.com 4 Phone: +44()

5 FT PEDAL HJFC FT PEDAL SINGLE DIRECTIN & DUAL DIRECTIN HJFC PART NUMBER CDE HJFC X X X X X X X Direction Travel utput* Sealing Power Termination Pedal 1. Single 2. Dual Degrees 1. Single Direction Analog Single Direction utput: (Rest/Full).5/VDC Degrees 2. Dual Direction Analog Dual Direction utput: (REV/CTR/FWD).5//VDC 3. Dual Direction Analog utput: (REV/CTR/FWD).5//VDC & Bidirectional Position Indication 4. Dual Direction Dual Analog utput 1: (CTR/FWD).5/VDC utput 2: (REV/CTR) /.5VDC 5. Single Direction Analog utput: (Rest/Full).5/VDC & Unidirectional Position Indication 6. Single Direction Dual Analog utput 1: (Rest/Full).5/VDC utput 2: (Rest/Full) /.5VDC 7. Dual Direction Analog utput 1: (REV/CTR/FWD).5//VDC utput 2: (REV/CTR/FWD).5//VDC 8. Dual Direction Dual Analog utput 1: (REV/CTR/FWD).5// utput 2: (REV/CTR/FWD) //.5 1. Fully Sealed 2. Unsealed 1. Regulated 5VDC Clean Supply, No Reverse Polarity Protection 2. 12VDC Power Supply with Reverse Polarity Protection 3. 24VDC Power Supply with Reverse Polarity Protection Dia., 12 Cable, Unterminated * Additional configurations are available. Contact factory. ** Unidirectional not available in Narrow Mounting. 1. Narrow Mounting** 2. Wide Mounting (SUGGESTED PANEL PENING) 2X X SINGLE DIRECTIN WIDE MUNTING 4X R.25 MAX 4.25 MAX X 3.36 (3.87) 9.5 MAX. LAD REFERENCE PINT 15 ± 2 () (3.75) (5.9 MAX.).69 (1) (3.6 MAX.) 1± (1.25) sales@is-rayfast.com 5 Phone: +44()

6 HJFC FT PEDAL FT PEDAL SINGLE DIRECTIN & DUAL DIRECTIN (SUGGESTED PANEL PENING) 2X DUAL DIRECTIN (NARRW MUNTING) (6.6) (3.68) 4X.345 2X R.25 MAX MAX LAD REFERENCE PINT BACKWARD (9.64) 13 ±1 13 ± LAD REFERENCE FRWARD PINT 3.6 MAX. (1) SLT DESIGNATES FRWARD (2.491) 4.25 MAX. CABLE NT SHWN IN ALL VIEWS 1± (1.125) UTPUT PTINS ANALG UTPUT VLTAGE ANGLE (DEGREES) (NMINAL) ANALG UTPUT VLTAGE (EACH DIRECTIN) ANGLE (DEGREES) (NMINAL) BACKWARD FRWARD ANALG UTPUT VLTAGE (EACH DIRECTIN) LIMIT SUPPLY FRWARD LIMIT SWITCH ANGLE (DEGREES) (NMINAL) BACKWARD LIMIT SWITCH BACKWARD FRWARD ANALG UTPUT PTIN 1 PTIN 2 PTIN 3 LIMIT SWITCH UTPUT VLTAGE LIMIT SUPPLY ANALG UTPUT VLTAGE (EACH DIRECTIN) ANGLE (DEGREES) (NMINAL) ANALG UTPUT VLTAGE ANGLE (DEGREES) ANALG UTPUT (NMINAL) LIMIT SWITCH UTPUT VLTAGE ANALG UTPUT VLTAGE ANGLE (DEGREES) (NMINAL) UTPUT 2 BACKWARD FRWARD LIMIT SWITCH UTPUT UTPUT 2 PTIN 4 PTIN 5 PTIN 6 ANALG UTPUT VLTAGE (EACH DIRECTIN) ANALG UTPUT VLTAGE (EACH DIRECTIN) ANGLE (DEGREES) (NMINAL) ANGLE (DEGREES) (NMINAL) UTPUT 2 BACKWARD FRWARD UTPUT 2 BACKWARD FRWARD PTIN 7 PTIN 8 sales@is-rayfast.com 6 Phone: +44()

7 PUSHBUTTN SWITCHES HP7 PUSHBUTTNS 1 MILLIN CYCLES, CNTACTLESS TECHNLGY Designated the HP7 series, these momentary pushbutton switches utilize Hall effect sensor technology for long life contactless switching, with 1 million cycles. Available in dusttight and moistureproof sealed configurations, these switches can also be watertight sealed to IP68S. The stylish dome-shaped pushbuttons are available in nine colors. Case and bezel are precision-machined aluminum alloy, available with either a black or clear coat anodized finish. Three case and button styles are offered in raised dome, flush dome and exposed dome styles. PC pins or wire leads are standard, with value-added connectors available to specification. This rugged switch is designed to withstand harsh environments while being subjected to high rates of actuation. Applications that require repeated jogging and other continuous operations are prime applications for the HP7 Hall Effect Switch. Examples of such can be found in material handling equipment such as loaders, lift trucks, bucket and shovel, and other applications where positioning of the load is critical. Features: 1 million cycles Hall effect sensor technology for long life Moistureproof & dusttight to IP64 or watertight to IP68S Stylish dome-shaped buttons in 9 colors Momentary action Choice of termination styles Mechanical detent available for tactile feedback RoHS/WEEE/Reach compliant Exposed Dome Raised Dome A B C Flush Dome Standard Characteristics/Ratings: Raised Dome with 3 PIN Header MECHANICAL: Mechanical Life: 1,, cycles without detent Button Travel:.8 inches max vertravel:.1 inches min perating Force: Without detent: 16 oz +/- 8 oz With detent: 28 oz +/- 8 oz perating Point:.4 inches +/-.1 Electrical Life: 1,, cycles Exposed Dome with Wire Leads ELECTRICAL RATINGS: Rated at Vcc = 25 C Load = 1mA (4.7KΩ) Electrical Units Min Max Supply Voltage VDC 24 Reverse utput Voltage VDC N/A.5 Supply Current ma N/A 9 Continuous utput Current ma N/A 25 Reverse Battery Protection VDC N/A -3 ELECTRNICS: Seal Integrity: IP64 or IP68S ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Storage Temp Range: -55 C to +15 C MATERIALS: Button: Case: Mounting Hardware: Thermoplastic Aluminum alloy Hex nut & lockwasher HP7 PART NUMBER CDE HP7 X X X X X X PIN HEAD WIRE LEAD A - Exposed Dome B - Raised Dome C - Flush Dome Dome Style DE. Exposed Dome DF. Flush Dome DR. Raised Dome Action 1. Normally High Momentary 2. Normally High Momentary with Detent 3. Normally Low Momentary 4. Normally Low Momentary with Detent Terminal Style 3. 3 Pin Header Potted 26 AWG Wire Leads Seal Level 2. Dusttight & Moistureproof 3. Watertight Case Color 1. Clear 2. Black Button Color 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Purple 8. Gray 9. White sales@is-rayfast.com 7 Phone: +44()

8 HPL LINEAR UTPUT PUSHBUTTNS LINEAR UTPUT PUSHBUTTNS 1 MILLIN LINEAR UTPUT CYCLES USING CNTACTLESS TECHNLGY The HPL Hall Effect Linear utput Pushbutton Switch is a revolutionary switch utilizing Hall effect technology to provide the user an output proportional to the travel of the button. The HPL delivers up to 1 million cycles. This rugged switch is ideal for applications where a simple on/off control is insufficient and a linear output is desired. Using the HPL, an operator can control the motion of a device as well as the speed of the movement. The HPL switch is an ideal control device for valves and variable speed drives, and can be used in industrial control, heavy equipment and material handling applications. The HPL is offered as a stand-alone switch and in a dual HPL rocker assembly. As with all TT switches, a wide variety of case and button styles and colors are offered, along with various termination styles and two levels of sealing. TT can provide custom configurations as well as provide the HPL switches installed in a control grip. HPL-4 15/32-32 Thread Rear Mount Shown with Wire Leads Features: Programmable outputs of.5 to volts 1 million cycles Hall effect for reliable contactless switching Watertight per IP68S available Front or behind panel mounting Choice of termination styles Rocker version available RoHS/WEEE/Reach compliant HPL-R Hall Effect Rocker HPL-3-5/8" Front Mount with Wire Leads HPL PART NUMBER CDE HPL X X X X X X X Case Style utput Terminal Style Seal Level Case Color Button Color Button Style* 1. Press Fit 3. Front Mount 1. - VDC 2. - VDC 1. 3 Straight Pins,.1 Centers 1. IP65 Splashproof 2. IP68S Watertight 1. Clear Anodized 2. Black Anodized 1. Red 2. Black 5/8 Thread VDC Potted 22 AWG 3. range 4. Rear Mount VDC Wire Leads 4. Yellow 15/32 Thread 5. Green 6. Rear Mount 6. Blue 5/8 Thread 7. Purple R. Rocker Assembly 8. Gray 9. White D (Case Styles 1, 3, 4 & 6) 2..5 D Domed (Case Styles 1, 3 & 6) R. Rocker Assembly (Case Style R) * For availability of larger button diameters, contact factory. sales@is-rayfast.com 8 Phone: +44()

9 LINEAR UTPUT PUSHBUTTNS HPL LINEAR UTPUT PUSHBUTTNS 1 MILLIN LINEAR UTPUT CYCLES USING CNTACTLESS TECHNLGY Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: Button Travel: 1,, cycles full stroke per button, IP68S rated 1,, cycles full stroke per button, IP64 rated.135 inches min to.16 inches max Full Travel Force:.15 inches, lbs. typical to 3.8 lbs. 25 C Reset Force: 5 oz 25 C Electrical Life: 1,, cycles ELECTRICAL RATINGS: Rated at Vcc = 25 C Load = 1mA (4.7KΩ) Electrical 1-4 Volts 4-1 Volts.5 - Volts -.5 Volts Units Min Typ Max Min Typ Max Min Typ Max Min Typ Max Supply Voltage VDC utput Voltage VDC (Button 5V Vcc utput Voltage VDC (Button 5V Vcc Supply Current ma N/A 8 1 N/A 8 1 N/A 8 1 N/A 8 1 Continuous utput ma -1 N/A 1-1 N/A 1-1 N/A 1-1 N/A 1 Current utput Resistance Ω N/A 1 1 N/A 1 1 N/A 1 1 N/A 1 1 (lo -2mA) ELECTRNICS: Seal Integrity: IP65 or IP68S ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Storage Temp Range: -65 C to +15 C Humidity: 96% RH, 7 C, 96 hours MATERIALS: Housing: Button Cap: Mounting Hardware: Anodized Aluminum alloy Thermoplastic Lockwasher, hex nut, washer when applicable.375".d. Button Style sales@is-rayfast.com 9 Phone: +44()

10 HPL LINEAR UTPUT PUSHBUTTNS LINEAR UTPUT PUSHBUTTNS 1 MILLIN LINEAR UTPUT CYCLES USING CNTACTLESS TECHNLGY Case Styles Linear utput Graphs (Vcc = 2 C) HPL-1 Press Fit HPL-3 5/8 Thread Front Mount Button Style 1 HPL-3 5/8 Thread Front Mount Dome Button Button Style 2 HPL-4 15/32 Thread Rear Mount HPL-6 5/8 Thread Rear Mount HPL-R HPL dimensions are equivalent to standard TT P1 Pushbutton dimensions as shown in the catalog except for overall length. Total button height is.25 on standard.375 D buttons. verall length from button top to rear of potting is 1.26 nominal, except for the HPL-4 and.5 D button styles which measure 6. Panel mounting hardware is included, except with the HPL-1 which is meant to press fit into mounting hole in a control grip. Refer to the dimensions shown or consult TT to design the control grip to meet your specifications. HPL-R* Rocker HPL-R * For alternative bracket styles and external boot options, contact factory. HPL Terminal Styles 47 pf Vcc +(Red) utput o(yellow) 47 pf GND -(Black) Schematic HPL sales@is-rayfast.com 1 Phone: +44()

11 SINGLE AXIS PADDLE HPW PADDLE NE MILLIN CYCLE RTATINAL LIFE Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: 1,, full forward to full back Travel: Full travel angle each direction from center to 25 typical perating Force: 4 oz 25 Max Allowable Radial Load: 3. lbs. Paddle Style The HPW series is available with eight output options. The HPW series offers a self-centering single axis actuator that provides linear change in voltage output in either direction from center. ptions include increasing or decreasing voltage output in either direction from center position to the full travel position in either direction, and single or dual outputs in either direction. The HPW series provides a one million cycle full forward to full back life and the electronics are sealed to IP68S, all the while offering outstanding EMI/RFI immunity. Features: Lever Style ELECTRICAL RATINGS: Vcc = 25 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance VDC -.25 N/A +.25 at Center (see graph for output 5V Vcc utput Voltage Tolerance VDC -.25 N/A +.25 at Full Travel (see graph for output 5V Vcc Supply Current ptions A & D ma N/A 8 1 (B =, Vcc = 5V, lo = ) Supply Current All ther ptions ma N/A 16 2 (B =, Vcc = 5V, lo = ) ENVIRNMENTAL: perating Temp Range: -4 C min to +85 C max Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-DTL-81F minimum integrity Sand/Dust: Per SAE J1455 Designed for grip, armrest & panel mounting Proven contactless analog output Hall effect technology 8 output options available Self-centering, single axis actuator 1,, mechanical life Electronics watertight to IP68S 1V/M EMI/RFI immunity Seal Integrity: RFI: Electronics watertight per IP68S Withstand 1 V/M, 14Hz to 1GHz RoHS/WEEE/Reach compliant HPW PART NUMBER CDE HPW X X X X X X EMI: Withstand per MIL-STD-461D/SAE J Button Style utput 1* utput 2** perating Force Termination Bezel Color Button Color 1. Paddle Style 2. Lever Style A. +/- VDC B. +/- VDC C. +/- VDC D. +/- VDC E. +/- VDC F. +/- VDC G. - VDC H..5 - VDC NNE +/- VDC -/+ VDC NNE +/- VDC -/+ VDC - VDC.5 - VDC 1. oz A. 22 AWG 18.3 Long, Stripped Ends B..25 SQ. Pins, Tin Plated 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White * utputs are from the center position to the full travel position in each direction. ptions A F provide increasing voltage in Direction 1 and decreasing voltage in Direction 2 from a single output. ptions G and H provide increasing voltages in both directions from two separate outputs. ** ptions B and E provide redundant output 2 which duplicates output 1. ptions C and F provide redundant output 2 which is inverse of output 1. sales@is-rayfast.com 11 Phone: +44()

12 HPW PADDLE SINGLE AXIS PADDLE NE MILLIN CYCLE RTATINAL LIFE PADDLE STYLE (.1) TYP SQUARE () PIN3 PIN 4 (UTPUT 2) (GND 1) PIN 2 PIN 5 (GND 2) (.2) TYP. 1.6 (Vcc 1) PIN 1 PIN 6 (Vcc 2) RIENTATIN BUMP DENTES 1.3 PINNED TERMINATIN NT ALL PINS ARE PRESENT IN ALL UTPUT CNFIGURATINS (+) DIRECTIN 2 (-) PERATING FRCE MEASURED AT THIS PINT (.57) (.195) (.92) WIRED TERMINATIN NT ALL WIRES ARE PRESENT IN ALL UTPUT CNFIGURATINS RCKER SWITCH PCB 47pF 47pF RED (Vcc 1) YELLW () BLACK (GND 1) RECMMENDED PANEL THICKNESS:.1 PTIMUM THICKNESS (.65 MIN MAX.) RECMMENDED PANEL PENING: 1.18 X 1.48 PTIMUM (1.175/1.185 X 1.475/1.485) 4X R pF VILET (Vcc 2) BLUE (UTPUT 2) pF GREEN (GND 2) UTPUT 2 IS NT PRESENT IN ALL CNFIGURATINS sales@is-rayfast.com 12 Phone: +44()

13 SINGLE AXIS PADDLE HPW PADDLE NE MILLIN CYCLE RTATINAL LIFE LEVER STYLE (.1) TYP SQUARE (.2) TYP RIENTATIN BUMP DENTES (+) DIRECTIN 2 (-) PERATING FRCE MEASURED AT THIS PINT (1.9) () PIN3 PIN 4 (UTPUT 2) (GND 1) PIN 2 PIN 5 (GND 2) (Vcc 1) PIN 1 PIN 6 (Vcc 2) RECMMENDED PANEL THICKNESS:.13 PTIMUM THICKNESS (.125 MIN MAX.) RECMMENDED PANEL PENING: (.75 MIN MAX).8 PTIMUM.8 2X.18.5 PINNED TERMINATIN NT ALL PINS ARE PRESENT IN ALL UTPUT CNFIGURATINS sales@is-rayfast.com 13 Phone: +44()

14 HPW PADDLE SINGLE AXIS PADDLE NE MILLIN CYCLE RTATINAL LIFE PTIN A PTIN B PTIN C.5 FULL (-).5 FULL (-).5 FULL (-) UTPUT 2 UTPUT 2 UTPUT 2 (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) PTIN D PTIN E PTIN F.5 FULL (-).5 FULL (-).5 FULL (-) UTPUT 2 UTPUT 2 UTPUT 2 (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) PTIN G PTIN H.5.5 FULL (-) FULL (-) UTPUT 2 UTPUT 2 (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) sales@is-rayfast.com 14 Phone: +44()

15 LINEAR FINGER JYSTICK HTL JYSTICK 2 & 4-WAY LINEAR FINGER JYSTICK Standard Characteristics/Ratings: HTL4 with Castle Style Button MECHANICAL: Mechanical Life: 1,, all directions Travel Angle: 23 min to 27 max perating Force with Boot: 16 oz typical to 2 oz max (at top of 25 C Max Allowable Vertical & Radial Force on Button: 2 lbs. Max Allowable Torque on Button: 7.5 lbs. The HTL series provides all of the performance of a full size, dual axis joystick in a miniature package that can be mounted in control handles, armrests and panels. The Hall effect sensors are immune to electromagnetic and radio frequency interference up to 1V/M. Programmable sensors with built-in temperature compensation ensure consistent and repeatable operation. The HTL series has excellent tactile feel for improved operator control and is available with either dusttight or IP68S watertight seal. A wide variety of output configurations are available to satisfy different applications. Features: Designed for grip, armrest & panel mounting Proven contactless analog output Hall effect technology Redundant outputs available 1 million cycles Electronics watertight to IP68S utstanding EMI/RFI immunity Variety of button styles RoHS/WEEE/Reach compliant ELECTRICAL RATINGS: HTL2: Rated at Vcc = 2 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance at VDC -.25 N/A +.25 Center (see graph for output 5V Vcc utput Voltage Tolerance at VDC -.25 N/A +.25 Full Travel (see graph for output 5V Vcc Supply Current per Sensor ma N/A N/A 1 utput Source Current ma -1 N/A 1 utput Resistance (lo 2mA) Ω N/A 1 1 HTL4: Rated at Vcc = 2 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance at VDC -.25 N/A +.25 Center (see graph for output 5V Vcc utput Voltage Tolerance at VDC -.25 N/A +.25 Full Travel (see graph for output 5V Vcc Supply Current per Sensor ma N/A 8 1 utput Source Current Limit ma -1 N/A +1 ELECTRNICS Seal Integrity: Electronics IP68S ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Storage Temp Range: -4 C to +85 C RFI: Withstand 1V/M, 14Hz to 1GHz EMI: Withstand per MIL-STD-461D/SAE J at 5Hz and 6Hz MATERIALS: Boot: Button: Case: Flange: Wires: Mounting Hardware: Elastomer Thermoplastic, black Thermoplastic, black Thermoplastic, black 22 or 24 AWG Panel fastener assembly sales@is-rayfast.com 15 Phone: +44()

16 HTL JYTSTICK LINEAR FINGER JYSTICK 2 & 4-WAY LINEAR FINGER JYSTICK HTL2 PART NUMBER CDE HTL2 X X X X 1 X XX X X Button Style Case Style Seal Travel perating Force utput 1 ➀ utput 2 ➁ Termination Button Color 1. Castle 2. External Castle Boot 3. Short Double Stadium 4. Tall Concave Stadium 5. External Bat Handle Boot 6. External Smooth Boot 7. Long Concave Y Axis Button SQ. 1. Dusttight 2. Watertight * oz AA. +/- VDC BB. +/- VDC CC. +/- VDC DD. +/- VDC EE. +/- VDC FF. +/- VDC GG..5 - VDC HH. - VDC NNE +/- VDC -/+ VDC NNE +/- VDC -/+ VDC.5 - VDC - VDC 1. Wire Leads 22 AWG, UL Pins 3. Wire Leads 24 AWG, SAE AS Black * Watertight sealed option available with button styles 2, 5 and 6. ➀ utputs are from the center to the full travel position. ptions AA, BB, CC, DD, EE, and FF provide increased voltage in +Y; and decreasing voltage in -Y direction from one output per axis. ptions GG and HH provide increasing voltages in all directions (+Y, -Y) from 2 outputs per axis. ➁ ptions BB and EE provide redundant output 2 which duplicates output 1. ptions CC and FF provide redundant output 2 which is inverse of output 1. HTL4 PART NUMBER CDE HTL4 X X X X X X XX X X Button Style Case Style Seal Travel Gating perating utput 1 ➀ utput 2 ➁ Termination Button Force Color 1. Castle SQ. 1. Dusttight mnidirectional; oz AA. +/- VDC NNE 1. Wire Leads 2. Black 2. External Castle Boot 2. Watertight * Square on Axis BB. +/- VDC +/- VDC 22 AWG 3. Short Double Stadium Guided Feel** CC. +/- VDC -/+ VDC UL Tall Concave Stadium 2. Gated; Dual Axis DD. +/- VDC NNE 2. Pins Return to Center 5. External Bat Handle Boot EE. +/- VDC +/- VDC 3. Wire Leads 3. mnidirectional; 24 AWG 6. External Smooth Boot Round: Smooth Feel FF. +/- VDC -/+ VDC SAE AS Long Concave Y Axis Button GG..5 - VDC HH. - VDC.5 - VDC - VDC 4. Wire Leads 22 AWG, UL 1569 shared powers and grounds (see schematic) 5. Wire Leads 24 AWG, SAE AS22759 shared powers and grounds (see schematic) * Watertight sealed option available with button styles 2, 5 and 6. ➀ utputs are from the center to the full travel position in each direction. ptions AA, BB, CC, DD, EE, and FF provide increased voltage in +X, +Y; and decreasing voltage in -X, -Y direction from one output per axis. ptions GG and HH provide increasing voltages in all directions (+X, +Y, -X, -Y) from 2 outputs per axis. ➁ ptions BB and EE provide redundant output 2 which duplicates output 1. ptions CC and FF provide redundant output 2 which is inverse of output 1. **Positive tactile feel when moved off X and Y axis positions. Gating Icons mnidirectional Square n-axis- Guided Feel*** ***Feel defined by shading. Gated Dual Axis Return to Center mnidirectional Round Smooth Feel Single Axis (HTL2 version) sales@is-rayfast.com 16 Phone: +44()

17 LINEAR TGGLE HTL TGGLE 2 & 4-WAY LINEAR TGGLE (.97 SQ.) +Y PINS NT PRESENT IN ALL CNFIGURATINS.25 TYP. -X 4X (.143) +X -Y (1.25 SQ.) (.18) (.995) PIN INDICATES +Y DIRECTIN SEE DETAIL A (.269) 2X (.75) PERATING FRCE REFERENCE PINT (.649) HTL2 FTPRINT N/C GND2Y CASE N/C N/C PCB 4X.118 VCC 2Y UTPUT 2Y VCC 1Y YELLW UTPUT BLACK GND RED VCC 47pF 47pF UTPUT1 Y UTPUT2 Y 47pF 47pF RED (2) VCC BLACK (2) GND YELLW (2) UTPUT.97 SQ. SUGGESTED PANEL PENING 1 6X.25.2 Y N/C N/C DETAIL A GND 1Y.1±.9.2±.9 ALL PINS NT PRESENT IN ALL CNFIGURATINS N/C.1.9.2±.9.3±.9 HTL4 FTPRINT BLUE UTPUT BLUE UTPUT VILET VCC GREEN GND GND 2X GND 2Y CASE PCB UTPUT1 X CASE PCB UTPUT1 X VCC 2X UTPUT 2X 47pF 47pF VCC 2Y UTPUT 2Y YELLW UTPUT BLACK GND RED VCC 47pF 47pF UTPUT1 Y 47pF 47pF UTPUT2 Y 47pF 47pF 47 pf RED (2) VCC BLACK (2) GND YELLW (2) UTPUT YELLW UTPUT BLACK GND RED VCC 47pF 47pF UTPUT1 Y 47pF 47pF UTPUT2 Y 47pF 47pF 47 pf RED (2) VCC BLACK (2) GND YELLW (2) UTPUT.25.2 TYP. Y VCC 1Y.5.1 VCC 1X.2.3 UTPUT2 X UTPUT2 X X GND 1Y GND 1X.1 GREEN (2) GND BLUE (2) UTPUT VILET (2) VCC TERMINATIN STYLE 1, 2, AND 3 BLUE (2) UTPUT TERMINATIN STYLE 4 AND 5 4X SQ. 1.2 DETAIL A ALL PINS NT PRESENT IN ALL CNFIGURATINS ALL WIRES NT PRESENT IN ALL CNFIGURATINS UTPUT 2 NT PRESENT IN ALL CNFIGURATINS SUGGESTED PANEL PENING sales@is-rayfast.com 17 Phone: +44()

18 HTL TGGLE LINEAR TGGLE 2 & 4-WAY LINEAR TGGLE HTL2 UTPUTS sales@is-rayfast.com 18 Phone: +44()

19 LINEAR TGGLE HTL TGGLE 2 & 4-WAY LINEAR TGGLE HTL4 UTPUTS sales@is-rayfast.com 19 Phone: +44()

20 HTL TGGLE LINEAR TGGLE BUTTN STYLE 2 Phone: +44()

21 PRPRTINAL UTPUT THUMBWHEEL HTW THUMBWHEEL 3 MILLIN CYCLE RTATINAL LIFE Knurled Wheel Style (with Wires) The HTW Hall Effect Proportional utput Thumbwheel is a spring-return-to-center, single axis thumbwheel with an actuator that provides linear change in voltage output in either direction from the center. Available with eight output options, including increasing and decreasing voltage output from the center position to the full travel position and single or dual (redundant) outputs. The HTW snaps into a 1.47 x.71 panel opening with rocker switch style mounting. A durable switch providing three million cycle rotational life, sealed to IP68S and excellent EMI immunity per MIL-STD-46 ID/SAE J , and will withstand RFI of 1V/M 14Hz to 1GHz. Features: 8 output options Spring-return-to-center single axis actuator Snaps into 1.47 x.71 panel opening Rocker switch style mounting 3 million cycle rotational life Electronics sealed to IP68S Excellent EMI/RFI immunity Detent options available RoHS/WEEE/Reach compliant Paddle Wheel Style (with Pins) Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: 3,, full forward to full back Mechanical Detent Cycle Life Per Detent: 1, +/- 21, full travel is +/- 3 max) Max Allowable Radial Load: 3. lbs. ELECTRICAL RATINGS: Rated at Vcc = 25 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance VDC -.15 N/A +.15 at Center (see graph for output 5V Vcc utput Voltage Tolerance VDC -.25 N/A +.25 at Center (for detent version A 5V Vcc utput Voltage Tolerance VDC -.25 N/A +.25 Full Travel (see graph for output 5V Vcc Supply Current Per Sensor ma N/A N/A 1 Reverse Voltage Protection: ELECTRNICS: Seal Integrity: Electronics IP68S -5VDC max ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F minimum integrity Sand/Dust: Per SAE J1455 EMI: Withstand per MIL-STD-461D/SAE J RFI: Withstand 1V/M 14Hz to 1GHz MATERIALS: Button: Bezel: Snap Arms: Wires: Thermoplastic Thermoplastic Stainless steel 18 AWG sales@is-rayfast.com 21 Phone: +44()

22 HTW THUMBWHEEL PRPRTINAL UTPUT THUMBWHEEL 3 MILLIN CYCLE RTATINAL LIFE HTW PART NUMBER CDE HTW X X X X X X X X Travel utput 1 utput 2 perating Force Button Style Termination Bezel Color Button Color Detent (if required) 1. +/ /- 3 A. +/- VDC B. +/- VDC C. +/- VDC D. +/- VDC E. +/- VDC F. +/- VDC G. - VDC H..5 - VDC NNE +/- VDC -/+ VDC NNE +/- VDC -/+ VDC - VDC.5 - VDC 1. oz. 1. Knurled Wheel 2. Paddle Wheel A. 18 AWG Wires 18.3 Long, Stripped Ends B..25 SQ. Pins 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White A. Spring return center +/ oz detent at end of travel, both directions* * nly available with Travel option 2. sales@is-rayfast.com 22 Phone: +44()

23 PRPRTINAL UTPUT THUMBWHEEL HTW THUMBWHEEL 3 MILLIN CYCLE RTATINAL LIFE PTIN A PTIN B PTIN C FULL (-) FULL (-) FULL (-) UTPUT 2 UTPUT 2 UTPUT 2 (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) PTIN D PTIN E PTIN F FULL (-) FULL (-) FULL (-) UTPUT 2 UTPUT 2 UTPUT 2 (+ ) DIRECTIN 2 (- ) PTIN G (+ ) DIRECTIN 2 (- ) PTIN H (+ ) DIRECTIN 2 (- ).5.5 FULL (-) FULL (-) UTPUT 2 UTPUT 2 (+ ) DIRECTIN 2 (- ) (+ ) DIRECTIN 2 (- ) sales@is-rayfast.com 23 Phone: +44()

24 HTWE THUMBWHEEL RETURN T END STANDARD THUMBWHEEL PRPRTINAL UTPUT THUMBWHEEL Paddle Wheel Knurled Wheel TT s HTWE control is a spring return to end, single axis, proportional output thumbwheel. Utilizing non-contact Hall effect technology, the HTWE delivers one million actuations. It also has excellent EMI/RFI shielding per MIL-STD-461D/SAE J Configuration options include choice of six linear outputs. The HTWE is available as an individual control ideal for panel mountings, or may be incorporated into one of TT s joysticks. Features: Spring-return-to-end single axis actuator Knurled & Paddle style actuators Wire or pinned termination options Variety of button & bezel colors 8 output options Rocker switch style mounting Snaps into 1.47 x.71 panel opening 1 million cycle rotational life Electronics sealed to IP68S Excellent EMI/RFI immunity RoHS/WEEE/Reach compliant Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: 1,, full forward to full back Max Allowable Radial Load: 3. lbs. ELECTRICAL RATINGS: Rated 25 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC 5.5 utput at Rest VDC -.25 N/A 5V Vcc utput at Full Travel VDC -.25 N/A 5V Vcc Supply Current Per Senor ma N/A N/A 1 ELECTRNICS: Seal Integrity: Electronics IP68S ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F minimum integrity Sand/Dust: Per SAE J1455 EMI: Withstand per MIL-STD-461D/SAE J RFI: Withstand 1V/M 14Hz to 1GHz MATERIALS: Button: Bezel: Snap Arms: Wires: Thermoplastic Thermoplastic Stainless steel 18 AWG HTWE RETURN T END STANDARD THUMBWHEEL HTWE X X* X X X X X Travel utput 1 utput 2 perating Force Button Style Termination Bezel Color Button Color A..5 - VDC B..5 - VDC C..5 - VDC D. - VDC E. - VDC F. - VDC NNE.5 - VDC -.5VDC NNE - VDC -VDC * utput options B and E provide redundant output 2 which duplicates output 1. utput options C and F provide redundant output 2 which is inverse output oz typ 1. Knurled Wheel 2. Paddle Wheel A. 18 AWG Wires, 18.3 Long, Stripped Ends B..25 SQ. Pins 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White sales@is-rayfast.com 24 Phone: +44()

25 RETURN T END STANDARD THUMBWHEEL HTWE THUMBWHEEL PRPRTINAL UTPUT THUMBWHEEL sales@is-rayfast.com 25 Phone: +44()

26 HTWE THUMBWHEEL RETURN T END STANDARD THUMBWHEEL PRPRTINAL UTPUT THUMBWHEEL PTIN A PTIN B.5.5 UTPUT 2 (+ ) (+ ) PTIN C PTIN D.5 UTPUT 2.5 (+ ) (+ ) PTIN E PTIN F.5.5 UTPUT 2 UTPUT 2 (+ ) (+ ) sales@is-rayfast.com 26 Phone: +44()

27 PRPRTINAL UTPUT THUMBWHEEL HTWF THUMBWHEEL FRICTIN HLD ACTUATIN STYLE THUMBWHEEL Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: 25, full forward to full back with center detent Knurled Wheel Style (with Wires) Paddle Wheel Style (with Pins) The HTWF Friction Hold Thumbwheel offers a maintained position, single axis thumbwheel actuator that provides a linear change in voltage output in either direction from center. ptions include increasing or decreasing voltage output from the center position to the full travel position, and single or dual (redundant) outputs per axis. The HTWF Thumbwheel has a rocker style snap-in mounting feature to accommodate a 1.47 x.71 panel opening. The HTWF provides 25, cycle life, full forward/ full backward, is sealed to IP68S and offers excellent EMI/RFI immunity and a flow through design. Ideal for heavy equipment, industrial machines or remote control applications. Features: 25, cycle life, full forward/full backward with center detent Maintained control positioning, no return to center Hall effect contactless sensing technology Number of output options Choice of bezel & button colors Snaps into 1.47 x.71 panel opening Electronics sealed to IP68S Excellent EMI/RFI immunity RoHS/WEEE/Reach compliant Initial perating Force at Top of Roller: 2 oz min to 6 oz 25 C Max Allowable Radial Load: 3. lbs. ELECTRICAL RATINGS: Rated at Vcc = 25 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance VDC -.15 N/A +.15 at Center (see graph for output 5V Vcc utput Voltage Tolerance VDC -.25 N/A +.25 Full Travel (see graph for output 5V Vcc Supply Current Per Sensor ma N/A N/A 1 ELECTRNICS: Seal Integrity: Electronics watertight per IP68S, 1 meter ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F minimum integrity Sand/Dust: Per SAE J1455 EMI: Withstand per MIL-STD-461D/SAE J RFI: Withstand 1V/M 14Hz to 1GHz MATERIALS: Button: Bezel: Snap Arms: Wires: Thermoplastic Thermoplastic Stainless steel 18 AWG HTWF PART NUMBER CDE HTWF X X X X X X X X Travel utput 1 utput 2 perating Force Button Style Termination Bezel Color Button Color Detent (if required) 1. +/- 3 A. +/- VDC B. +/- VDC C. +/- VDC D. +/- VDC E. +/- VDC F. +/- VDC G. - VDC H..5 - VDC NNE +/- VDC -/+ VDC NNE +/- VDC -/+ VDC - VDC.5 - VDC 1. oz. 1. Knurled Wheel 2. Paddle Wheel A. 18 AWG Wires, 18.3 Long, Stripped Ends B..25 SQ. Pins 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White A. Detent 2 oz increase out of center in both directions* * utput options A F do not have a tolerance on the center outputs unless a center detent is selected. utput options G and H are only available with center detent. sales@is-rayfast.com 27 Phone: +44()

28 HTWF THUMBWHEEL PRPRTINAL UTPUT THUMBWHEEL FRICTIN HLD ACTUATIN STYLE THUMBWHEEL 28 Phone: +44()

29 PRPRTINAL UTPUT THUMBWHEEL HTWF THUMBWHEEL FRICTIN HLD ACTUATIN STYLE THUMBWHEEL PTIN A PTIN B PTIN C PTIN D PTIN E PTIN F PTIN G PTIN H sales@is-rayfast.com 29 Phone: +44()

30 HTWM MINIATURE THUMBWHEEL MINI PRPRTINAL UTPUT THUMBWHEEL SHRTER BEHIND PANEL DEPTH Paddle Wheel Style Knurled Wheel Style Standard Characteristics/Ratings: The HTWM offers the same performance as the standard HTW Proportional Thumbwheel but with a much shorter behind panel depth, ideal for use in grip, armrest and panel applications. Available with eight output options, the HTWM offers a springreturn-to-center, single axis thumbwheel actuator that provides linear change in voltage output in either direction from center. ptions include increasing or decreasing voltage output from the center position to the full travel position, and single or dual (redundant) outputs per axis. The HTWM offers snap-in style mounting and a three million cycle rotational life. The HTWM electronics are sealed to IP68S and have excellent EMI/RFI immunity. Features: Shorter behind panel depth:.96 max. 8 output options Spring-return-to-center single axis actuator Rocker switch style mounting 3 million cycle rotational life Electronics sealed to IP68S Excellent EMI/RFI immunity RoHS/WEEE/Reach compliant MECHANICAL: Mechanical Life: 3,, full forward to full back Max Allowable Radial Load: 3. lbs. ELECTRICAL RATINGS: Rated at Vcc = 25 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance VDC -.25 N/A +.25 at 5V Vcc utput Voltage Tolerance at VDC -.25 N/A +.25 Full 5V Vcc Supply Current Per Sensor ma N/A N/A 1 ELECTRNICS: Seal Integrity: Electronics IP68S ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F minimum integrity Sand/Dust: Per SAE J1455 EMI: Withstand per MIL-STD-461D/SAE J RFI: Withstand 1V/M 14Hz to 1GHz MATERIALS: Button: Bezel: Wires: Thermoplastic Thermoplastic 18 AWG sales@is-rayfast.com 3 Phone: +44()

31 MINI PRPRTINAL UTPUT THUMBWHEEL HTWM MINIATURE THUMBWHEEL SHRTER BEHIND PANEL DEPTH HTWM PART NUMBER CDE HTWM X X X X X X X Travel utput 1* utput 2** perating Force Button Style Termination Bezel Color Button Color 1. +/- 4 A. +/- VDC B. +/- VDC C. +/- VDC D. +/- VDC E. +/- VDC F. +/- VDC G. - VDC H..5 - VDC NNE +/- VDC -/+ VDC NNE +/- VDC -/+ VDC - VDC.5 - VDC 1. oz. 1. Knurled Wheel 2. Paddle Wheel A. 18 AWG Wires, 18.3 Long, Stripped Ends B..25 SQ. Pins 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White * utputs are from the center position to the full travel position in each direction. ptions A F provide increasing voltage in Direction 1 and decreasing voltage in Direction 2 from a single output. ptions G and H provide increasing voltages in both directions from two separate outputs. ** ptions B and E provide redundant output 2 which duplicates output 1. ptions C and F provide redundant output 2 which is inverse of output PADDLE WHEEL BUTTN STYLE UTPUT 1 UTPUT 2 47pF 47pF 47pF 47pF Vcc (+) (RED) () (YELLW) GND (-) (BLACK) Vcc (+) (VILET) UTPUT2 () (BLUE) GND (-) (GREEN) UTPUT 2 IS NT PRESENT IN ALL CNFIGURATINS VCC1 (+) X.525 VCC2 (+) (+ ).32 DIRECTIN 2 (- ).96 MAX. GND 1 (-) GND 2 (-) MUNTING: RECMMENDED PANEL THICKNESS:.15 PTIMUM THICKNESS (.4 MIN. -.2 MAX.) RECMMENDED PANEL PENING:.7 X 1.34 PTIMUM (.695/.75 X 1.335/1.345} RECMMENDED PANEL RADII:.1 PTIMUM ( MAX.).7 2X.225 () PINNED TERMINATIN UTPUT 2 () NT ALL PINS ARE PRESENT IN ALL UTPUT CNFIGURATINS RIENTATIN BUMP DENTES (+) X R.1 NT ALL WIRES ARE PRESENT IN ALL UTPUT CNFIGURATINS sales@is-rayfast.com 31 Phone: +44()

32 HTWM MINIATURE THUMBWHEEL MINI PRPRTINAL UTPUT THUMBWHEEL SHRTER BEHIND PANEL DEPTH PTIN A PTIN B PTIN C PTIN D PTIN E PTIN F PTIN G PTIN H sales@is-rayfast.com 32 Phone: +44()

33 RETURN T END MINI THUMBWHEEL HTWME MINIATURE THUMBWHEEL PRPRTINAL UTPUT MINI THUMBWHEEL Knurled Wheel Paddle Wheel The HTWME offers the same performance as the standard HTWE single axis, proportional output thumbwheel, but has a much shorter behind panel depth. With a panel depth of.96" max., the HTWME is ideal for panel or armrest mountings, or can be incorporated into one of TT s joysticks. The HTWME provides snap-in style mounting, and also utilizes non-contact Hall effect technology, which accounts for a one million cycle life. It also has excellent EMI/RFI shielding per MIL-STD-461D/ SAE J and RFI to withstand 1 V/M, 14Hz to 1GHz. Configuration options include a choice of six linear voltage outputs. Features: Return to end single axis actuator Shorter behind panel depth:.96 Knurled & Paddle style actuators Wire or pinned termination options Variety of button & bezel colors 6 output options Easy snap-in mounting 1 million cycle rotational life Electronics sealed to IP68S Excellent EMI/RFI immunity RoHS/WEEE/Reach compliant Standard Characteristics/Ratings: MECHANICAL: Mechanical Life: 1,, full forward to full back Max Allowable Radial Load: 3. lbs. ELECTRICAL RATINGS: Rated at 25 C Load = 1mA (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC 5.5 utput at Rest VDC -.25 N/A 5V Vcc utput at Full Travel VDC -.25 N/A 5V Vcc Supply Current Per Senor ma N/A N/A 1 ELECTRNICS: Seal Integrity: Electronics IP68S ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F minimum integrity Sand/Dust: Per SAE J1455 EMI: Withstand per MIL-STD-461D/SAE J RFI: Withstand 1V/M 14Hz to 1GHz MATERIALS: Button: Bezel: Snap Arms: Wires: Thermoplastic Thermoplastic Thermoplastic 18 AWG HTWME RETURN T END THUMBWHEEL MINIATURE CASE HTWME X X* X X X X X Travel utput 1 utput 2 perating Force Button Style Termination Bezel Color Button Color 1. 8 A..5 - VDC B..5 - VDC C..5 - VDC D. - VDC E. - VDC F. - VDC NNE.5 - VDC -.5VDC NNE - VDC -VDC * utput options B and E provide redundant output 2 which duplicates output 1. utput options C and F provide redundant output 2 which is inverse output oz typ 1. Knurled Wheel 2. Paddle Wheel A. 18 AWG Wire, 18.3 Long, Stripped and Tinned Ends B..25 SQ. Pins 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White sales@is-rayfast.com 33 Phone: +44()

34 HTWME MINIATURE THUMBWHEEL RETURN T END MINI THUMBWHEEL SHRTER BEHIND PANEL DEPTH sales@is-rayfast.com 34 Phone: +44()

35 RETURN T END MINI THUMBWHEEL HTWME MINIATURE THUMBWHEEL SHRTER BEHIND PANEL DEPTH PTIN A PTIN B.5.5 UTPUT 2 (+ ) (+ ) PTIN C PTIN D.5.5 UTPUT 2 (+ ) PTIN E (+ ) PTIN F.5.5 UTPUT 2 UTPUT 2 (+ ) (+ ) sales@is-rayfast.com 35 Phone: +44()

36 JH JYSTICKS JYSTICKS TECHNLGY JYSTICK The JH Series Joystick is designed around the rugged mechanism of a traditional 4-way hydraulic joystick, but it utilizes contactless Hall effect technology for increased life and more dependable performance in the field. This combination provides performance and features never before available in an electronic joystick. The JH series uses TT s field-proven dual magnet configuration found in TT s HPL Linear utput Hall Effect switches. The Hall effect sensors are fully protected against electromagnetic and radio frequency interference (EMI and RFI) up to 1V/M. Programmable sensors with built-in magnetic temperature compensation logic ensure consistent and repeatable operation. The JH series is designed for maximum flexibility in features and in tactile feel. A wide variety of input and output configurations are available to satisfy different applications. The modular electronic package can be configured for both standard and custom I/ requirements including CANbus and other output options available. Features: Adapts to a wide variety of shaft styles 15 million cycle life in all directions 3 lbs. static load strength at grip reference point (grp) Electronics sealed to IP68S EMI/RFI shielding up to 1V/M Factory programmable pretravel & overtravel Analog, CANbus, USB & other custom output options available Redundant outputs available Fail safe & neutral indicator Single and dual axis available Z axis available with universal grip only Programmable sensors 5V standard regulator available to accommodate a 9-32VDC power supply Various output configurations Available with a variety of grip & switch options RoHS/WEEE/Reach compliant JH Joystick Shown with TT Medium Universal Grip, K1 Rockers and P3 Pushbutton Switches sales@is-rayfast.com 36 Phone: +44()

37 JYSTICKS JH JYSTICKS TECHNLGY JYSTICK Standard Characteristics/Ratings: GENERAL: Sensor Type: Design: Hall effect analog, 1 or 2 outputs per axis Dual magnet (2.26) 2.81 ELECTRICAL RATINGS: Rated at 2 C Load = 1ma (4.7kΩ) 3.44 Electrical Units Min Typ Max utput Voltage to 2 Deflection VDC -.15 N/A +.15 Tolerance at 5V Vcc utput Voltage 19 to 2 Deflection VDC -.15 N/A +.15 Tolerance at Full 5V Vcc Supply Current Per Sensor ma N/A N/A 1 utput Source Current Limit ma -1 N/A 1 (2.99) SUGGESTED PANEL PENING (4 PLC) MECHANICAL: Mechanical Life: Travel Angle: vertravel Angle: perating Force: 9,, min. up to 15,, in all directions depending on configuration 2 typical.5 min to max With bellows, 2 C to 85 C at grip, lbs. min to 5.5 lbs. max With bellows, -4 C at grip, 1 lbs. min to 18. lbs. max.6 (4 PLC).5-2 UNF -2B INTERNAL THREAD FR HANDLE ATTACHMENT ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: 1g, 1Hz to 2KHz swept sinusoidal Electronics: Sealed to IP68S EMI/RFI: Per SAE J1113 (typical), contact factory for details Sand/Dust: Without bellows, withstand per SAE J1455 (7) (4.345) (.631) MATERIALS: Housing: Bellows: Cable: Mounting Hardware: Polyester EPDM, black 22 AWG (19 strands of 34 AWG TSC) 1/4-2 x 3/4 carriage bolts, self-locking nuts Hall Joystick CANbus Technology Joystick (22 or 24 AWG) sales@is-rayfast.com 37 Phone: +44()

38 JHM MEDIUM JYSTICK MEDIUM JYSTICK UP T 1 MILLIN PERATINAL CYCLES IN ALL DIRECTINS JHM with Center P9 Switch JHM with Hall Effect Rocker Standard Characteristics/Ratings: GENERAL: Sensor Type: Design: Magnet: Hall effect analog, factory programmed with temperature compensation, and ground and supply line break detection, over voltage and reverse voltage protection options. Contactless sensing Dual bar permanent magnet The JHM series Medium Hall Effect Joystick is a full function operator control in a package that will fit in an armrest or on a panel. It utilizes TT s patented Hall effect technology for unmatched life and reliability. Electronics are sealed and it has an operational life of ten million cycles in all directions. Additional options include CANopen and CAN J1939 versions, multiple analog and digital auxiliary control outputs, redundant sensors and a variety of output configurations, along with a variety of grip and switch options. Features: Designed for armrest & panel mounting Proven contactless analog output Hall effect technology Electronics sealed to IP68S Up to 1 million operational cycles in all directions Available with a variety of grip & switch options Redundant sensors available Various output configurations CANopen CAN J1939 USB Serial Analog 5V standard, 12V & 24V available Also available in gated and frictional travel versions RoHS/WEEE/Reach compliant ELECTRICAL RATINGS: Rated at 2 C Load = 1ma (4.7kΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance VDC -.25 N/A Y, -Y, +X, -X 5V Vcc utput Voltage Tolerance at Full VDC -.25 N/A +.25 Travel +Y, -Y, +X, -X 5V Vcc Supply Current Per Sensor ma N/A N/A 1 utput Source Current Limit ma -1 N/A 1 MECHANICAL: Mechanical Life: Travel Angle: vertravel Angle: perating Force: In all directions, 1,, cycles min up to 1,, cycles depending on configuration 18 min to 22 max.5 min to max With bellows, 2 C to 85 C at grip.5 lb. min to lbs. max ENVIRNMENTAL: perating Temp Range: Low force -2 C to +85 C High force -4 C to +85 C Electronics: Sealed to IP68S RFI: Withstand 1V/M, 14KHz to 1GHz EMI: Withstand per MIL-STD-461D/SAE J MATERIALS: Housing: Bellows: Wires: Mounting Hardware: Thermoplastic, black Neoprene or silicone, black Per customer application Panhead screws sales@is-rayfast.com 38 Phone: +44()

39 MEDIUM JYSTICK JHM MEDIUM JYSTICK UP T 1 MILLIN PERATINAL CYCLES IN ALL DIRECTINS Shown is an example of one output per axis configuration. For additional output configurations, contact factory. Redundant sensors are available, please contact factory. 47pF RED 2 YELLW 2 PWER (+) JYSTICK Y UTPUT 47pF BLACK 2 GRUND (-) 47pF RED 1 YELLW 1 PWER (+) JYSTICK X UTPUT 47pF BLACK 1 GRUND (-) sales@is-rayfast.com 39 Phone: +44()

40 JHS-F FRICTIN HLD SINGLE AXIS JYSTICK WITH FRICTIN HLD SINGLE AXIS JYSTICK WITH FRICTIN HLD Standard Characteristics/Ratings: ELECTRICAL RATINGS: Rated at 2 C Load = 1ma (4.7kΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Tolerance at Full Travel VDC -.25 N/A +.25 Direction 1 (+ 5V Vcc utput Tolerance at Full Travel VDC -.25 N/A +.25 Direction 2 (- 5V Vcc Supply Current Per Sensor ma N/A N/A 1 (B =, Vcc = 5V, lo = ) ELECTRNICS: Seal Integrity: Electronics watertight per IP68S The JHS-F1 is a single axis, friction hold joystick that was designed for the construction equipment and off-road vehicle market. The key feature of the JHS-F1 joystick is that the lever does not return to center when released. Designed for use in applications where the output is used to control the speed or direction of the machine or mechanism, allowing the operator to set the speed of movement to focus on steering or other tasks. Favored for its compact size, strength and reliability, the JHS-F1 is manufactured with non-contacting Hall effect sensors; the electronics are sealed to IP68S. It offers excellent resistance to RFI at 1V/M and EMI per MIL-STD-461D/SAE J ; standard.5 to VDC proportional output and a mechanical life of 5, cycles. Features: Rugged compact design Hall effect contactless sensing Electronics sealed to IP68S Excellent proportional control utstanding EMI/RFI immunity Redundant output available RoHS/WEEE/Reach compliant MECHANICAL: Mechanical Life: Travel Angle: perating Force: 5, cycles 25 typical, 24 min to 26 max lbs. typical, lbs. min to lbs. max ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F min integrity RFI: Withstand 1V/M, 14KHz to 1GHz EMI: Withstand per MIL-STD-461D/SAE J MATERIALS: Basic Handle: Housing: Bellows: Cable: Mounting Hardware: Polyphenylene Blend Thermoplastic EPDM, black (typical) 3/22 AWG (19 strands of 34 AWG TSC) PVC/Polyurethane blend outer jacket 1-24 x 3/4 carriage bolts, self-locking nuts sales@is-rayfast.com 4 Phone: +44()

41 SINGLE AXIS JYSTICK WITH FRICTIN HLD JHS-F FRICTIN HLD SINGLE AXIS JYSTICK WITH FRICTIN HLD 41 Phone: +44()

42 JHS-RC RETURN T CENTER SINGLE AXIS RETURN T CENTER JYSTICK SINGLE AXIS JYSTICK WITH RETURN T CENTER FEATURE Standard Characteristics/Ratings: ELECTRICAL RATINGS: Rated at 2 C Load = 1ma (4.7kΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Tolerance at Full Travel VDC -.25 N/A +.25 Direction 1 (+ 5V Vcc utput Tolerance at Full Travel VDC -.25 N/A +.25 Direction 2 (- 5V Vcc utput Tolerance at Center VDC -.25 N/A 5V Vcc Supply Current Per Sensor ma N/A N/A 1 (B =, Vcc = 5V, lo = ) ELECTRNICS: Seal Integrity: Electronics watertight per IP68S The JHS-RC1 is a high reliability single axis, spring-returnto-center joystick, resistant to the levels of temperature, shock, vibration and EMI/RFI typically found in off-highway construction environments. The contactless Hall effect sensor eliminates many of the failures associated with traditional joystick technology. The JHS-RC has been tested to four million cycles with no sign of boot wear and no degradation of electrical performance. The electronics are sealed to IP68S. It offers resistance to RFI at 1V/M and EMI per MIL-STD- 461D/SAE J ; standard.5 to VDC proportional output. The JHS-RC is recommended for the construction and off-road vehicle market. Features: Rugged compact design Hall effect contactless sensing Tested to 4 million cycles Smooth spring return to center +/- 25 travel in a rugged housing utstanding EMI/RFI immunity Redundant output available RoHS/WEEE/Reach compliant MECHANICAL: Mechanical Life: Travel Angle: perating Force: 4 million cycles 25 typical, 24 min to 26 max lbs. typical, lbs. min to lbs. max ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Humidity: 96% RH, 7 C, 96 hours Vibration: Per MIL-81F min integrity RFI: Withstand 1V/M, 14KHz to 1GHz EMI: Withstand per MIL-STD-461D/SAE J MATERIALS: Housing: Bellows: Cable: Mounting Hardware: Thermoplastic EPDM, black (typical) 3/22 AWG (19 strands of 34 AWG TSC) PVC/Polyurethane blend outer jacket 1-24 x 3/4 carriage bolts, self-locking nuts sales@is-rayfast.com 42 Phone: +44()

43 SINGLE AXIS RETURN T CENTER JYSTICK JHS-RC RETURN T CENTER SINGLE AXIS JYSTICK WITH RETURN T CENTER FEATURE 2X X X X R.25 sales@is-rayfast.com 43 Phone: +44()

44 JHT MINI JYSTICK MINIATURE JYSTICK CMPACT DESIGN Standard Characteristics/Ratings: Full Boot Shown GENERAL: Sensor Type: Design: Hall effect analog, factory programmed ground and supply line break detection; over voltage and reverse voltage protection Contactless sensing Half Boot with P9 Pushbutton Shown The JHT miniature series Hall Effect joystick s compact design and robust construction is the ideal solution where space is limited and precision control is required. Ideal applications include: robotics, construction equipment, hydraulic controls, medical and surgery equipment, security and surveillance video cameras. The JHT has been tested to five million cycles with no degradation of electrical performance or boot wear. Electronics are sealed to IP68S and the EMI/RFI withstand are per SAE J1113 specifications. Features: Compact design excellent for armrest & panel mounting Proven contactless analog output Hall effect technology 5 million operational cycles in all directions Electronics sealed per IP68S Single or omni-directional ptional pushbutton switch(es) available RoHS/WEEE/Reach compliant ELECTRICAL RATINGS: Rated at Vcc = 2 C Load = 1ma (4.7KΩ) Electrical Units Min Typ Max Supply Voltage VDC utput Voltage Tolerance VDC -.25 N/A +.25 at 5V Vcc utput Voltage Tolerance VDC -.25 N/A +.25 Full 5V Vcc Supply Current* ma N/A 1 12 (B =, Vcc = 5V, lo = ) utput Impedance kω N/A 1 N/A *Single output per axis. Dual axis per output available. Supply current 2mA typical. MECHANICAL: Joystick Mechanical Life: 5,, cycles in all directions P9 Mechanical Life: 1,, cycles Travel Angle: 18 min to 22 max, 2 typical vertravel Angle:.5 min to max, 1 typical Joystick perating Force: With bellows, at grip.5 lb. min to lbs. max over temperature range P9 perating C 8 oz min to 16 oz max, 12 oz typical ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Seal: Electronics seal to IP68S RFI/EMI: Withstand per SAE J1113 MATERIALS: Housing: Bellows: JHT PART NUMBER CDE JHT XX X X XX X X Thermoplastic, black Silicone, black. Additional materials available, contact factory. Switch/Boot Style Gating* perating Force utput 1 utput 2 Termination P9 Button Color** 11. With P9 Pushbutton & Full Boot 12. With P9 Pushbutton & Half Boot 21. Without Pushbutton & Full Boot 1. Gated, Single axis Return to Center 3. mni-directional; Round Smooth Feel 4. mni-directional; n-axis and ff-axis Guided Feel 5. mni-directional; Round n-axis Guided Feel 1. 1 lb AA. +/- VDC BB. +/- VDC CC. +/- VDC DD. +/- VDC EE. +/- VDC FF. +/- VDC GG..5 - VDC HH. - VDC NNE +/- VDC -/+ VDC NNE +/- VDC -/+ VDC.5 - VDC - VDC AWG Wire Leads *Gated = Restricted movement in XY axis only. Gating icons appear on page 69. **Applies only to half boot with pushbutton option NTES: utputs are from the center to the full travel position in each direction. ptions AA, BB, CC, DD, EE and FF provide increased voltage in +X, +Y; and decreasing voltage in -X, -Y direction from one output per axis. ptions GG and HH provide increasing voltages in all directions (+X, +Y, -X, -Y) from 2 outputs per axis. ptions BB and EE provide redundant output 2 which duplicates output 1. ptions CC and FF provide redundant output 2 which is inverse of output 1. N. None 1. Red 2. Black 3. range 4. Yellow 5. Green 6. Blue 7. Purple 8. Gray 9. White sales@is-rayfast.com 44 Phone: +44()

45 MINIATURE JYSTICK JHT MINI JYSTICK CMPACT DESIGN RED (Vcc 1) BLACK (GND 1) BLUE (X1 UTPUT) YELLW (Y1 UTPUT) VILET (Vcc 2) GREEN (GND 2) RANGE (X2 UTPUT) WHITE (Y2 UTPUT) GENERAL SCHEMATIC (WIRE BUNDLE 1) ALL UTPUTS ARE NT PRESENT IN ALL CNFIGURATINS GRAY (P9 SW) GRAY (P9 SW) PUSHBUTTN SCHEMATIC (WIRE BUNDLE 2) ALL WIRES ARE NT PRESENT IN ALL CNFIGURATINS Full Boot Version Shown 1.28 SLT DENTES +Y +Y X +X 1.67 SQUARE 1.38 E SUGGESTED PANEL PENING MAX. PANEL THICKNESS F.14 GRP 4X.12 4X #4-4 UNC-2B THREADED INSERTS.375 THD. DEPTH -Y () 2.45 MAX.75 MAX WIRE BUNDLE 2 WIRE BUNDLE 1 1 LABEL: PART NUMBER TT DATE CDE (YYWW) 9.±.5 sales@is-rayfast.com 45 Phone: +44()

46 JHT MINI JYSTICK MINIATURE JYSTICK CMPACT DESIGN JHT Switch/Style Boot Configuration JHT and JHT Z-Axis Icons Demonstrating Feel* Single Axis mnidirectional Round Smooth Feel mnidirectional n-axis and ff-axis Guided Feel** mnidirectional Round n-axis Guided Feel *Feel defined by shading. **Full output available in all directions. Contact factory for details Phone: +44()

47 MINIATURE JYSTICK JHT MINI JYSTICK PTIN AA CMPACT DESIGN PTIN BB X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS X,+Y X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS +X,+Y UTPUT1 UTPUT1 UTPUT2 UTPUT2 PTIN DD PTIN CC X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT2 PTIN EE +X,+Y X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT2 PTIN FF +X,+Y X,-Y DEGREES +X,+Y -X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT1 +X,+Y UTPUT2 PTIN GG UTPUT2 PTIN HH X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS +X,+Y X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS +X,+Y UTPUT1 UTPUT1 UTPUT2 UTPUT2 sales@is-rayfast.com 47 Phone: +44()

48 JHT Z-AXIS MINI JYSTICK MINIATURE Z-AXIS JYSTICK CMPACT DESIGN Standard Characteristics/Ratings: JHT Z-Axis JHT Z-Axis with Pushbuttons The JHT Z-Axis Miniature Series Hall Effect Joystick allows for a 6 rotational movement of the knob at the top of the joystick. Z-Axis options include detent, friction hold or spring return to center. Its compact design is the ideal solution where space is limited and precision control is required, while its robust construction is suited for demanding applications. The JHT joystick has been tested to five million cycles in all directions with no degradation of performance. The Z-Axis and/or pushbuttons have been tested to one million cycles. Various gating options are also available. The JHT Z-Axis electronics are sealed to IP68S and can withstand EMI/RFI per SAE J1113 specifications. The JHT Z-Axis has numerous applications and is ideal for construction equipment, unmanned vehicles, hydraulic controls, industrial vehicle controls, medical and surgery equipment and surveillance video cameras. Features: 6 rotational movement of the knob Compact design Contactless analog output Hall effect technology 5 million operational cycles in all directions (Joystick) Joystick electronics sealed per IP68S ptional pushbutton switches available RoHS/WEEE/Reach compliant GENERAL: Sensor Type: Design: Hall effect analog, factory programmed ground and supply line break detection; over voltage and reverse voltage protection Contactless sensing ELECTRICAL RATINGS: Rated at Vcc = 2 C Load = 1ma (4.7KΩ) Electrical - Joystick Z-Axis Return to Center Units Min Typ Max Supply Voltage VDC utput 1+2 Voltage, +Z, -Z VDC V Vcc utput 1+2 at Full Travel VDC Z 5V Vcc utput 1+2 at Full Travel VDC Z 5V Vcc Supply current (per sensor) ma N/A N/A 1. B =, Vcc = 5V, 1o = utput - Source Current Limit ma - N/A B = -X, Vo = Electrical - Joystick Z-Axis Friction Units Min Typ Max Supply Voltage VDC utput 1+2 at Full Travel VDC Z 5V Vcc utput 1+2 at Full Travel VDC Z 5V Vcc Supply Current (per sensor) ma N/A N/A 1 (B =, Vcc = 5V, 1o = ) utput - Source Current Limit ma - N/A B = -X, Vo = Electrical - Joystick Z-Axis 3 Detent Units Min Typ Max Supply Voltage VDC utput 1+2 Voltage, +Z, -Z VDC V Vcc utput 1+2 at Full Travel VDC Z 5V Vcc utput 1+2 at Full Travel VDC Z 5V Vcc Supply current (per sensor) ma N/A N/A 1. B =, Vcc = 5V, 1o = utput - Source Current Limit ma - N/A B = -X, Vo = Z-Axis Mechanical Life: 1,, cycles in all directions Units Min Typ Max Travel Angle (Total) Degrees perational Torque Z with Detent perational Torque Z 7. with Friction Hold perational Torque Z Return to Center ENVIRNMENTAL: perating Temp Range: -4 C to +85 C Seal: Electronics without pushbutton sealed to IP68S MATERIALS: Housing: Bellows: Thermoplastic, black Silicone, black. Additional materials available, contact factory. sales@is-rayfast.com 48 Phone: +44()

49 MINIATURE Z-AXIS JYSTICK JHT Z-AXIS MINI JYSTICK CMPACT DESIGN 5V 5V 5V IN RED JYSTICK (Vcc) GND BLACK JYSTICK (GND) BLUE JYSTICK (X UTPUT) YELLW JYSTICK (Y UTPUT) JYSTICK SCHEMATIC MAX GRP GRAY SWITCH (GND) 4X.12 SUGEESTED PANEL PENING MAX. PANEL THICKNESS F.14 () 2.7 MAX. SW2 SW1 DIRECTIN -Z DIRECTIN +Z VILET SWITCH 1 3 ANGLE F Z-AXIS RTATIN +Y.75 MAX RANGE SWITCH 2 SLT DENTES +Y SWITCH 1 KEYPAD SCHEMATIC -X +X 1.67 SQ SWITCH 2 -Y 4X #4-4 UNC-2B THREADED INSERTS JHT Z-AXIS PART NUMBER CDE JHT XX X X XX X N Switch/Boot Style (All Half Boot) Gating* perating Force Joystick utput 1 Joystick utput 2 Termination 32. Z-Axis with Detent, Single utput 42. Z-Axis with Friction Hold, Single utput 52. Z-Axis Return to Center, Single utput 62. Z-Axis with Detent, Dual utput 72. Z-Axis with Friction Hold, Dual utput 82. Z-Axis Return to Center, Dual utput 92. Z-Axis with Detent, Single utput wtih Two Pushbuttons A2. Z-Axis with Friction, Single utput with Two Pushbuttons B2. Z-Axis Return to Center, Single utput with Two Pushbuttons C2. Z-Axis with Detent, Dual utput with Two Pushbuttons D2. Z-Axis with Friction, Dual utput with Two Pushbuttons E2. Z-Axis Return to Center, Dual utput with Two Pushbuttons 1. Gated, Single axis Return to Center 1. 1 lb AA. +/- VDC BB. +/- VDC 3. mni-directional; CC. +/- VDC Round Smooth Feel DD. +/- VDC 4. mni-directional; EE. +/- VDC n-axis and ff-axis Guided Feel FF. +/- VDC 5. mni-directional; Round n-axis Guided GG..5 - VDC HH. - VDC Feel NNE +/- VDC -/+ VDC NNE +/- VDC -/+ VDC.5 - VDC - VDC AWG Wire Leads *Gated = Restricted movement in XY axis only. Gating Icons shown on page 69 in the JHT mini joystick section. NTES (Applies to Joystick uput nly): utputs are from the center to the full travel position in each direction. ptions AA, BB, CC, DD, EE and FF provide increased voltage in +X, +Y; and decreasing voltage in -X, -Y direction from one output per axis. ptions GG and HH provide increasing voltages in all directions (+X, +Y, -X, -Y) from 2 outputs per axis. ptions BB and EE provide redundant output 2 which duplicates output 1. ptions CC and FF provide redundant output 2 which is inverse of output 1. sales@is-rayfast.com 49 Phone: +44()

50 JHT Z-AXIS MINI JYSTICK MINIATURE Z-AXIS JYSTICK CMPACT DESIGN JYSTICK UTPUT CNFIGURATIN PTIN AA PTIN BB X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT2 +X,+Y PTIN CC PTIN DD X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT2 +X,+Y X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT2 +X,+Y PTIN EE PTIN FF X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT2 +X,+Y X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS UTPUT1 UTPUT2 +X,+Y PTIN GG PTIN HH X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS +X,+Y -X,-Y DEGREES NMINAL UTPUT VLTAGE ALL DIRECTINS +X,+Y UTPUT1 UTPUT1 UTPUT2 UTPUT2 sales@is-rayfast.com 5 Phone: +44()

51 CMMUNICATIN PRTCLS CP CANPEN & J1939 USB, CANPEN & J1939 CMMUNICATIN PRTCLS AVAILABLE TT is an industry leader in the integration of J1939 and CANopen serial bus communications in on and off-highway operator controls. TT has extensive experience implementing CAN operating systems in conjunction with the latest generation of operator controls; replacing traditional electromechanical and hydraulic systems with solid state, digital and analog electro-hydraulic control systems. TT s product line of electro-mechanical switches, Hall effect devices, pushbuttons and mini joysticks mated to our Hall effect joysticks and control handles provide a CAN based integrated solution for any application. J1939 offers an industry standard set of defined codes for consistent system integration. The TT J1939 Joystick will work in systems running with 25Kbit/sec processing a message approximately every 1ms. J1939 can be configured into three variations (5, 51, 52 are the default addresses). An external resistor change at the connector pins allows multiple TT joysticks to be used on the same bus. Additional joystick addresses can be added by assigning a unique identification during configuration. CANopen provides a greater degree of flexibility in defining device IDs and can be remotely configured. CANopen can also be configured to run with other system baud rates. CANbus Joystick Features: Standard configuration for both is three analog input channels & 12 digital input channels with two digital output channels CAN power accommodates a 9 32VDC power supply I/ extension for up to 4 digital inputs, eight analog inputs & multiple digital outputs by I²C interface Both J1939 & CANopen versions include a failure monitoring feature EMI/RFI per IS /336 ECC, tested to 1V/M perating temperature -4 C to +85 C Storage temperature -65 C to +15 C All designs are RoHS and WEEE compliant HJFC Foot Pedal with CANbus Interface PRTCLS/HARDWARE sales@is-rayfast.com 51 Phone: +44()

52 HDW HARDWARE ACCESSRIES & HARDWARE Shrouds Shrouds are added to pushbutton switches to guard against inadvertent actuation. The actuating device must be inserted into the shroud in order to actuate the switch. We have an assortment from which to choose shown here. We are also able to design and fabricate a shape to meet your specifications and application needs. SHRUDS, PANEL SEALS & MUNTING HARDWARE Material: Aluminum alloy, machined to specification. Finish: Black anodized. For other color options, contact factory R.2.15 #3 CENTER DRILL (.19) THRU DEPTH.14 MAX R.31.2 TT P/N C3793 TT P/N C3428 ( 1.46) (.626) () (.937) (.63) (.875) (.624) (.688) (.5) ( 1.312) (.812 ACRSS FLATS) ( 1.199) TT P/N C332 (.32) 5/8-24UNEF-2B (.281) TT P/N C3871 (.2) TT P/N C3426 Panel Seals Stainless steel cup washer with silicone rubber seal assures proper watertight panel seal. Mounts behind panel. Approved to MIL-DTL-5423/16. Designed for sealing 15/32 bushing with keyway. TT P/N: MIL P/N: M5423/16-1 Thickness of bushing seal is reduced to.8 when mounted to panel. Gaskets -Rings (Buna) TT P/N I.D. TT P/N I.D Mounting Hardware MILITARY P/N TT P/N BUSHING SIZE (inches) KEYWAY WASHERS MS2581-C 7181-C.25 MS2581-C C4.469 MS2581-C C6.625 INTERNAL TTH LCKWASHERS MS MS MS HEX NUTS STANDARD MS2582-C C MS2582-C C MS2582-B B HEX NUTS WIRE LCKING MS MS All hardware is stainless steel except MS2582-B11 which is brass, black oxide plated. sales@is-rayfast.com 52 Phone: +44()