WORKPLACE lights. Light range JAPL Light range JAPO Light range JAPH

Transcription

1 WORKPACE lights ight range JAP ight range JAPO ight range JAPH

2 WORKPACE IGHTS JAP+JAPO+JAPH JUNG workplace lights are sheet steel lights for use at the workplace in industry and the manual trades. A wide variety of casing designs provide many different mounting options. The light outlet cover is made of a piece of single-pane security glass. The glass is mounted into a metal frame that is connected to the lighting case by bracket clips on the one side and hinges on the opposite side. FEATURES STANDARD DESIGN OPTIONS ACCESSORIES n Versions up to -zone 2 and 22 available n Free of any substances detrimental to painting processes n Powder-coated sheet metal light n Uses fluorescent tubes with two-pin sockets and compact fluorescent tubes n All lights conform to relevant standards and are marked n Versions with U / cu approval n Housing colour: RA 9016 traffic white n Symmetric reflectors made of special surface-refined aluminium n Cable inlet: 2 x M 25 screw connections suitable for cable diameters of 7-17 mm n Terminal: 1, 2, 3, N, PE max. clamping area 2.5 mm 2 n Glass: 4 mm single-pane security glass n Powder coating in any RA colours n Polished stainless steel finish n Connection via various plug systems n Supplied ready to fit with cable attached n Dimmable versions n Tubes can be fitted of varying brightness n Special voltages / frequencies n rackets for fixing lights in place n Versions with ant-glare screens n Glass stickered, printed or etched n M8 galvanised eyebolt for suspended lights n Knotted-link chain in any length with appropriate carabiner hooks in galvanized finish n Special fixing parts made to client specifications 1

3 WORKPACE IGHTS JAP The JAP light range has been developed for providing light at workplaces. These typical workplace lights are available in a swivel design as ceiling mounted or suspended lights. IGHT CROSS-SECTION IGHT DISTRIUTION CURVE Tubes that can be fitted in symmetric version: n JAP.. 1, 2 oder 3 lamps JAP.. 2 lamps with symmetrical aluminium reflector TECHNICA DATA JAPEV n Suitable for -zone 2 and 22 n Approval EC conformity declaration n Explosion protection II3G Ex na IIC T4 Gc X II3D Ex tc IIIC T75º C Dc IP 65 n mark n allast electronic n Ambient temperature -20º C to +40º C n Rated voltage / frequency V / Hz n Protection class l n Temperature class T4 n Protection category IP 65 JAPEV n Suitable for industrial lighting n Approval EC conformity declaration n mark n allast electronic (EVG) n Ambient temperature -20º C to +40º C n Rated voltage / frequency V / Hz n Protection class l n Temperature class T4 n Protection category IP 65 2

4 WORKPACE IGHTS JAP TITING IGHT (SW) pins on the front of the housing enable it to be mounted within brackets vertically or horizontally. The light s direction can be smoothly adjusted. Designation 1 Drawing no. JAP..-SW 18 W JAP..-SW 36 W JAP..-SW 58 W JAP..-SW 80 W TC SUSPENDED IGHT (HE) Threaded studs on the back enable ceiling suspension or fitting into brackets. Eyebolts, chains, carabiner hooks and other materials for securing the lights in place are not included. Designation Drawing no. JAP..-HE 18 W JAP..-HE 36 W JAP..-HE 58 W JAP..-HE 80 W TC SUSPENDED IGHT (A) An inexpensive, high quality surface-mounted light. A fixing frame welded onto the back of the light enables it to be put up as a surface-mounted wall or ceiling light. Designation Drawing no. JAP..-A 18 W JAP..-A 36 W JAP..-A 58 W JAP..-A 80 W TC

5 WA FIXING RACKET Powder-coated, galvanised or stainless steel sheet metal wall fixing bracket Wide version Narrow version CEIING FIXING RACKET Powder-coated, galvanised or stainless steel sheet metal ceiling fixing bracket , , ong version Short version 4

6 WORKPACE IGHTS JAPO The lights in the JAPO range are sheet steel lights that have been developed for mounting onto wall elements with glass panels. The lights are mounted from the outside of the booth. The lights are not approved for use in -zones. TECHNICA DATA IGHT CROSS-SECTION IGHT DISTRIUTION CURVE JAPOEV n Suitable for industrial lighting n Approval EC conformity declaration n mark n allast electronic n Ambient temperature -20º C to +40º C n Rated voltage / frequency V / Hz n Protection class l n Protection category IP 20, IP 54 after correct fitting Cannot be used in -zones! Specifications subject to change Tubes that can be fitted in symmetric version: n JAPO.. 1, 2 oder 3 lamps JAPO.. 2-lamp with symmetrical aluminium reflector 5

7 TITING IGHT (SW) ights without a glass cover for mounting onto on-site wall elements. Pins are welded onto the front of the lights housing, enabling them to fit into a variety of different brackets for mounting. Designation 1 Drawing no. JAPO..-SW 18 W JAPO..-SW 36 W JAPO..-SW 58 W SUSPENDED IGHT (HE) ights without a glass cover. Threaded studs on the back enable fitting into brackets. Fastening materials are not included. 90 Designation Drawing no. JAPO..-HE 18 W JAPO..-HE 36 W JAPO..-HE 58 W

8 WORKPACE IGHTS JAPH The JAPH range of light fitting features sheet steel lights that are ideally suited for lighting industrial halls. The light fitting s cover is made of single-pane safety glass, which is mounted in a sheet metal frame. Clamping bracket locks make this easy to open. Standard fixing is via threaded studs force-fitted on the back. The fixing variants can be customised to client specifications. ild TECHNICA DATA JAPHEV n Suitable for industrial hall lighting n Approval EC conformity declaration n mark n allast electronic (EVG) n Uses T5 or T8 fluorescent tubes n Ambient temperature -20º C to +40º C n Rated voltage / frequency V / Hz n Protection class l n Protection category IP 54 Cannot be used in -zones! Specifications subject to change SUSPENDED IGHT (HE) Threaded studs on the back enable ceiling suspension. Eyebolts, chains, carabiner hooks and other materials for securing the lights in place are not included. 100 Designation Drawing no. JAPH..-HE 58 W