5100 Series. A Better Sliding Door Automatic door technology as you ve never seen it before!

Transcription

1 TRANSMITTAL DATE: 7/23/13 TRANSMITTAL TYPE: PRODUCT DATA TRANSMITTAL NO. 291 PAGES: 38 METHOD: FTP SITE 5100 Series A Better Sliding Door Automatic door technology as you ve never seen it before!

2 record-usa 5100 Series Automatic Sliding Doors 5100 Series Sliding Doors record-usa s new 5100 series sliding door offers the very latest in automatic door technology to assure the quietest, smoothest performance in a sleek and elegant design. Offering a variable breadth of configurations and functions, the 5100 series assures the architect and building owner a wide array of capabilities in ensuring the most safe, secure and attractive entranceway available by choosing from the following options: Telescopic Doors Door panels open and close in an elegant and noiseless movement and at different, harmoniously coordinated speeds. This interesting motion is not only aesthetically pleasing but also functional. The telescopic sliding door operator is ideal for narrow passages where the opening width obtained with a standard sliding door would not be sufficient. Crowded entrances are no problem as it opens quickly and quietly.. The 5100 series telescopic doors utilize 1 ¾ X 6 1/2 framing and are available in 3 or 6 panel configurations. 2

3 Automatic Sliding Doors record-usa 5100 Series Surface Applied Units The 5100 series automatic sliding door packag may also be specified or ordered for surface mounted applications. This allows for the sliding door system to be mounted to existing structures with little or no modification required. The 5100 series surface mounted packed is perfect for retrofit construction and in providing for ADA compliance.. All Glass All Glass- Showcasing a building, emphasizing a lobby or creating an illusion of openness, the 5200 series all glass sliding door system allows the beauty and elegance to show through the entrance area with clear line of sight unhindered by vertical stiles. This entrance creates an unobstructed view of either the interior or exterior of a building while providing the same smooth, quiet and reliable operation as the 5100 series. Suitable for high end design applications as well as every day use, the 5200 series is the perfect compliment for architectural design creativity in entrances. Safety Meeting the minimum requirements of the ANSI standards should be the least that you expect for your door supplier. The 5100 series by record-usa comes standard with the required sensors as mandated by ANSI. In addition, dual safety beams located at 24 and 48 above the finished floor are included at no charge for the ultimate in protection to the user of the door. In addition, flush mounted exit devices are optional for securing the breakout function of the door without sacrificing exit compliance Series

4 Automatic Sliding Doors record-usa 5100 Series Special Design Automatic entranceways should add to the appearance of a building, not detract from it. Through the use of French windows, multiple muntins, specially aligned verticals or horizontal members in doors or transoms, extra sidelites, tall or short bottom rails or a breadth of other varying options the record 5100 series can easily be designed to match most any storefront Tandem The Tandem sliding door system by record-usa allows both an identified entry door and an exit door work independent of each other while sharing the same header assembly for aesthetics and design simplicity. Another added feature is that these doors provide a larger clear door opening than the standard 5100 series would allow Series 4324 Phil Hargett Court Monroe, NC Fax

5 Door Sensor i sensor With its large motion and presence detection pattern, the i sensor features a safety zone in the threshold and sidelights that is always on. The size and shape of the detection pattern can be easily adjusted to match almost any application.

6 i sensor DoorSensor

7 EXPLODED VIEWS & PARTS PARTS LIST EVPL-07 Effective September 1, 2007 record-usa 4324 PHIL HARGETT COURT (28110) POST OFFICE BOX 3099 MONROE, NC USA WATS FAX

8 EXPLODED VIEWS AND PARTS PRICE LIST INDEX 5100 SLIDER HEADER EXPLODED VIEW~~~~~~~~~~~~~~~~~~~~ SLIDER HEADER ASSEMBLY PARTS~~~~~~~~~~~~~~~~~~~ SLIDING DOOR EXPLODED VIEW~~~~~~~~~~~~~~~~~~~~~~ SLIDING DOOR PARTS LIST~~~~~~~~~~~~~~~~~~~~~~~~~~ "SO" PANEL EXPLODED VIEW~~~~~~~~~~~~~~~~~~~~~~~~ "SO" PANEL PARTS LIST~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "O" PANEL EXPLODED VIEW~~~~~~~~~~~~~~~~~~~~~~~~~ "O" PANEL PARTS LIST~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ BOTTOM GUIDE ASSEMBLIES~~~~~~~~~~~~~~~~~~~~~~~~ BOTTOM GUIDE PART LIST~~~~~~~~~~~~~~~~~~~~~~~~~~ BOTTOM GUIDE / THRESHOLD~~~~~~~~~~~~~~~~~~~~~~~11, ELECTRIC LOCK KITS~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ TELESCOPE ELECTRIC LOCK KITS~~~~~~~~~~~~~~~~~~~~14 TRACKLESS ICU VIEW~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~15 TRACKLESS ICU PARTS LIST~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /6100 OPERATOR EXPLODED VIEW~~~~~~~~~~~~~~~~~~~~~ /6100 OPERATOR PARTS LIST~~~~~~~~~~~~~~~~~~~~~~~~~ /6100 ARM ASSEMBLIES~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~19 SWITCHES & ACCESSORIES~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 20 SWITCHES & ACCESSORIES~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 21

9 SERIES 5100 SLIDER OPERATOR 6 5 7a d 7c 7b 10c 10b 9 7g 8a 7f 7e 12 13b b 18a 25 23c 13a 13 20a b 23 23a 21 10c 10b a b 10a a 13b PAGE 1

10 SERIES 5100 HEADER ASSEMBLY PARTS ITEM PART NUMBER DESCRIPTION QTY. REQ'D LIST PRICE COVER, CL-DB * COVER, CENTER 15"(bipart) CL-DB SCREW,10-32X1/4" ALLEN CS BL OXIDE (cntr.cvr.) NUT PLATE, (3 holes) 20 typ SCREW,10-32X1/2" ALLEN CS BL OXIDE 12 typ BRACKET, HEADER MOUNTING - LH DRIVE MODULE, SERIES a THREADED STANDOFF, M5X14 3 7b PLATE, MOTORDRIVE SPACER 1 7c CHASSIS ASSY.,DRIVE MODULE 1 7d SCREW,M5X20 ALLEN CS Zinc(Motor/GB. Mounting) 3 7e MOTORDRIVE ASSY. 1 7f CONTROL ASSY. 1 7g J1 - CANbus, J2 - Ext.&Aux. Sensors, B/O,C/O, J3 - Rem. Sensor, Rkr./Key Panel, J4 - Interior Sensor, J5 - Safety Beams, TRANSFORMER, 115 Volt Primary 1 8a FILTER, Powerline, FUSE,5x20, 2 1/2amp,slow blow COVER, Power Supply BRACKET ASSY., UP. SIDELITE PVT. - LH 1 10a BRACKET, UPPER SIDELITE PIVOT 1 10b PIN, CLEVIS, 3/8"x1 1/4" 1 10c BEARING, FLANGED BRACKET, BELT BASE BRACKET, BELT CLASP BRACKET ASSY., SIDELITE STRIKE 2 13a BRACKET, SIDELITE STRIKE 2 13b PANIC SWITCH, MAGNETIC N/O BRACKET, LOCK STRIKE (standard) NUT, M6 X BOLT, HAMMER HEAD, (electric lock) CARRIER ASSY., LOWER BELT 1 18a LOCK, ELECTRIC (Fail Safe) Kits see page 13, b LOCK, ELECTRIC (Fail Secure) Kits see page 13, CARRIER ASSY., UPPER BELT IDLER PULLEY ASSY. 1 20a PULLEY, IDLER 1 20b BRACKET, IDLER PULLEY PLATE ASSY., TERMINAL BLOCK BRACKET, CONDUIT ANCHOR CARRIER ASSY., SLAVE 2 23a ROLLER ASSY., CARRIER 2 23b ROLLER ASSY., ANTI-RISE 1 23c SCREW, M6X16, HEX, SER.FLANGED HD ASSY.,DOOR STOP BRACKET ASSY.,UP. SIDELITE PVT. - RH HEADER, SERIES 5100 SLIDER CL-DB ROLLER TRACK, SERIES 5100 SLIDER DAMPER, ROLLER TRACK BRACKET, HEADER MOUNTING - RH NUT PLATE, SQUARE, 1/4-20 (1Hole) 17 typ SCREW, 1/4-20X3/8"Allen BH Flanged 17 typ BELT, TIMING, NOTE: For Safety Beam Info, refer to page 21, Switches & Acessories PAGE 2

11 SERIES 5100 SLIDING DOOR "SX" PANEL PAGE 3

12 SERIES 5100 SLIDING DOOR "SX" PANEL ITEM PART NUMBER DESCRIPTION QTY. REQ'D. LIST PRICE ITEM PART NUMBER DESCRIPTION END CAP, DOOR CATCH INTERLOCK, CL-DB SCREW, 1/4-20 X 1" FHSH BLOCK, GLASS JACKING BOLT,1/4-20X3/4"HHS GRADE SCREW 10-24X3/4" PFH, TYPE "F" 8 W/NYLON PATCH DOOR CATCH CL - DB BOLT,1/4-20X5/8" HWH GR SCREW,1/4-20x3/8" FHSH COVER,DOOR CATCH, plastic SEAL, FOAM RUBBER, 2" LENGTH STILE, FIXED, CL-DB WEATHERPILE, MOHAIR, BLACK STILE, TANDEM CL-DB HOUSING, DOOR CATCH ASSY SHEAR BLOCK "SB1" INTERLOCK,LH, DOOR CATCH (RH ) SCREW #14 X 5/8" PPH TYPE "B" WEATHERPILE, MOHAIR, BLACK SCREW 10-24X1/2" PFH, TYPE "F" WELDMENT, TORQUE BAR MUNTIN, CL-DB BRACKET, TORQUE TUBE SUPPORT KEY CYLINDER, CL-DB (pair) WEATHERPILE, CHANNEL, BLACK CYLINDER, THUMBTURN, CL-DB CHANNEL, WEATHERPILE DEADLOCK, HOOKBOLT PIVOT,TORQUE TUBE BOTTOM SCREW,10-24X3/4" PFH TYPE"F" 8 W/5/16X1" FH SCREW BACKER PLATE, "BP1", TOP /2" BOTTOM RAIL CL-DB SHEAR BLOCK -"SB2", TOP SCREW,10-32X3/8"PPH,CL RAIL, TOP, 3", CL - DB 1 42a SCREW,10-32X3/8"PPH,SS BL SCREW,GLASS ADJUST PIN GUIDE ASSY. RH&LH 1 1/4-20X2" PPH ROLLER CATCH BACKER PLATE "BP1" BOTTOM PLATE, INTERLOCK ASSY SHEAR BLOCK "SB2" BOTTOM BRACKET, INTERLOCK ASSY BOLT 1/4-20X5/8" HWH GR WEATHERPILE, MOHAIR, BLACK SWEEPSTRIP W/BRUSH(not shown) SCREW,1/4-20X3/8"BSCS-SS SCREW, 1/4-20 X 1" BSCS-SS 2 ~ SASH, 1/4" SQUARE CL-DB ~ ~ GUTTER, 1/4" SQUARE CL-DB ~ ~ SASH, 1" SQUARE CL-DB ~ ~ GUTTER, 1" SQUARE CL-DB ~ ~ VINYL, GLAZING BULB ~ QTY. REQ'D. LIST PRICE PAGE 4

13 SERIES 5100 SWING OUT SIDELITE "SO" PANEL 5100 RH SIDELITE "SO" PANEL PAGE 5

14 SERIES 5100 SWING OUT SIDELITE "SO" PANEL ITEM PART NUMBER DESCRIPTION QTY. REQ'D LIST PRICE STILE, TANDEM CL-DB SHEAR BLOCK, "SB3", TOP RAIL, UPPER CL-DB /4-20 X 2" PPH GLASS ADJ. SCREW BRACKET, PANIC SWITCH MAGNET ROLLER CATCH ASSY.(TOP & BOTTOM) INCLUDES BALL DETENT STILE, FIXED CL-DB (NARROW) PIVOT ANGLE "PA1-R" (SILVER-TOP) with BEARING BOLT,1/4-20 X 3/4" HWH GR.8 (TOP & BOTTOM) SCREW,10-24 x 1/2" PFH BLOCK, GLASS JACKING BOLT,1/4-20 X 5/8" HWH GR.8 (TOP & BOTTOM) BACKER PLATE "BP1" SCREW,10-24 X 3/4" PFH Type F INTERLOCK CL-DB (TYP.) WEATHERPILE CL-DB ~ MUNTIN BAR (1 1/2") CL-DB SHEAR BLOCK "SB1" SCREW,10-24 X 3/4" PFH Type F SCREW,#14 X 5/8" PPH TYPE "B" CHANNEL, WEATHERPILE WEATHERPILE CL-DB ~ PIVOT ANGLE "PA2-R" (GOLD-BOTTOM) with BEARING RAIL, BOTTOM (3 1/2") CL-DB SCREW,10-24 X 3/4" PFH Type F SHEAR BLOCK "SB2" BACKER PLATE "BP1" PIN, SIDELITE PIVOT, BOTTOM BLOCK, SIDELITE PIVOT, BOTTOM 1 ~ SASH 1/4" SQUARE CL-DB ~ ~ GUTTER 1/4" SQUARE CL-DB ~ ~ SASH, 1" SQUARE CL-DB ~ ~ GUTTER 1" SQUARE CL-DB ~ ~ VINYL, GLAZING BULB ~ NOTE: For Safety Beam Info, refer to Page 21, Switches & Accessories PAGE 6

15 SERIES 5100 FIXED SIDELITE "O" PANEL 5100 LH FIXED SIDELITE "O" PANEL a 14b PAGE 7

16 SERIES 5100 FIXED SIDELITE "O" PANEL ITEM PART NUMBER DESCRIPTION QTY. REQ'D LIST PRICE STILE, FIXED CL - DB (narrow) SHEAR BLOCK "SB3" TOP UPPER RAIL CL -DB BACKER PLATE "BP1" SCREW, /2" PFH Type F SCREW, #14 X 5/8" PPH Type B MUNTIN CL - DB SHEAR BLOCK "SB1" SCREW, 10-24X1/2"PFH Type F VINYL, SIDELITE SEAL BOLT, 1/4-20X5/8" HWH /2" BOTTOM RAIL CL-DB SHEAR BLOCK "SB1" 2 14a CHANNEL, WEATHERPILE 1 14b WEATHERPILE SCREW, 10-24X3/4 " PFH Type F BACKER PLATE "BP1" 2 ~ SASH, 1/4" SQUARE CL-DB ~ ~ GUTTER, 1/4"SQUARE CL-DB ~ ~ SASH, 1" SQUARE CL-DB ~ ~ GUTTER, 1" SQUARE CL-DB ~ ~ VINYL, GLAZING BULB ~ NOTE: For Safety Beam Info, refer to Page 21, Switches & Accessories PAGE 8

17 SERIES 5100 BOTTOM GUIDE SYSTEMS ITEM #1 PIN GUIDE ASSEMBLY RH & LH BRACKET PIN RETAINER RING SET SCREW SPRING, FINGER RETAINER RING PIN RETAINER RING FIXED PANEL BOTTOM GUIDE ASSEMBLY LH RH (SHOWN) BRACKET SET SCREW ITEM #2 RAMPED PIN GUIDE TRACK ITEM #3 INSERT, PIN GUIDE BOTTOM GUIDE FOR FULL BREAK OUT SLIDER USED ON ALL SLIDERS AS OF (CALL FACTORY FOR OLDER UNITS) NOTE: ALSO USED ON THE 5100 TELESCOPE FULL BREAKOUT BOTTOM GUIDE SYSTEM NOTE: ALSO USED ON THE 5100 TELESCOPE FIXED PANEL BOTTOM GUIDE SYSTEM RETAINER RING ITEM #4 BOTTOM GUIDE TRACK CAP ROLLER and BEARING ASSY STUD BOTTOM GUIDE PLATE - LH BOTTOM GUIDE PLATE - RH (SHOWN) PLATE (BLANK) ITEM #8&9 ITEM #10 FIXED PANEL BOTTOM GUIDE USED FROM WILL RETROFIT TO OLD STYLE DOOR EXTRUSION AND WORK WITH CURRENT GUIDE RAIL EXTRUSION. ITEM #5 REVERSE BREAKOUT BOTTOM GUIDE LH RH NUT WASHER BOTTOM PIVOT BRACKET PIN G-RAIL INSERT ITEM # RETAINER RING BOTTOM GUIDE RAIL (PER FOOT) ROLLER and BEARING ASSY STUD ITEM #6&7 TRACKLESS ICU BOTTOM GUIDE LH (SHOWN) RH BRACKET PIN RETAINER RING SET SCREW SPRING, FINGER RETAINER RING PLATE (BLANK) FIXED PANEL BOTTOM GUIDE ASSEMBLY PRIMARY TO SECONDARY DOOR LH (SHOWN) RH ITEM #12& RETAINER RING ROLLER andbearing ASSY STUD BOTTOM GUIDE PLATE - LH (SHOWN) BOTTOM GUIDE PLATE - RH BOTTOM RAIL SECONDARY DOOR BOTTOM GUIDE CHANNEL (PER FOOT) ITEM #14 RAMPED PIN GUIDE TRACK TELESCOPE ITEM #15 PAGE 9

18 SERIES 5100 BOTTOM GUIDE SYSTEMS ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE PIN GUIDE ASSY. RH & LH MF RAMPED PIN GUIDE TRACK MF INSERT, PIN GUIDE BOTTOM GUIDE TRACK CAP REVERSE BREAKOUT PIN GUIDE ASSY TRACKLESS ICU BOTTOM GUIDE ASSY.-LH TRACKLESS ICU BOTTOM GUIDE ASSY.-RH FIXED PANEL BOTTOM GUIDE ASSY.-LH FIXED PANEL BOTTOM GUIDE ASSY.-RH BOTTOM GUIDE RAIL CL-DB MF G-RAIL INSERT TELESCOPE BOTTOM GUIDE SYSTEMS FIXED PANEL BOTTOM GUIDE ASSY.- LH 1 TELESCOPE PRIMARY TO SECONDARY FIXED PANEL BOTTOM GUIDE ASSY.- RH 1 TELESCOPE PRIMARY TO SECONDARY MF BOTTOM GUIDE CHANNEL TELESCOPE SECONDARY DOOR MF RAMPED PIN GUIDE TRACK - TELESCOPE 1 PARTS ROLLER & BEARING ASSY STUD RETAINER RING PIN WASHER NUT 1 PAGE 10

19 SERIES 5200 ALL-GLASS BOTTOM GUIDE SYSTEM RETAINER RING G-RAIL INSERT ITEM # ROLLER andbearing ASSY STUD BOTTOM GUIDE RAIL (PER FOOT) ITEM #2 ALL-GLASS BOTTOM GUIDE ASSY LH (SHOWN) RH ITEM #3& ALL-GLASS WEATHERSTRIP WEATHER PILE LEADING EDGE SEAL, FINNED ITEM #1 ITEM #2 THRESHOLD THRESHOLD 1/2" X 7" ITEM #1 THRESHOLD 1/4" X 7" ITEM #2 THRESHOLD 1/2" x 4 1/2" ITEM #3 PAGE 11

20 SERIES 5200 ALL-GLASS BOTTOM GUIDE SYSTEM ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE G-RAIL INSERT BOTTOM GUIDE RAIL CL-DB ALL-GLASS BOTTOM GUIDE ASSY.-LH ALL-GLASS BOTTOM GUIDE ASSY.-RH 1 ALL-GLASS WEATHERSTRIP WEATHERPILE, LEADING EDGE SEAL, FINNED 1 THRESHOLD THRESHOLD 1/2" X 7" SADDLE - MF THRESHOLD 1/4" X 7" SADDLE - MF THRESHOLD 1/2" X 4 1/2" SADDLE - MF 1 PARTS ROLLER & BEARING ASSY STUD RETAINER RING PIN WASHER NUT 1 PAGE 12

21 SERIES 5100 ELECTRIC LOCK ASSEMBLY KITS 1a 1c 1d 1e 1b ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE KIT, BI-PART, FAIL-SAFE 1 1a LOCK ASSY., ELECTRIC - FAIL SAFE 1 1b SCREW, 1/4-20X3/8" BFHCS 7 1c BRACKET, LOCK STRIKE (standard) 2 1d NUT, M6X e BOLT, HAMMERHEAD 2 1f NUT PLATE, 1/4-20 (not shown) 3 2a 2c 2d 2e 2b KIT, BI-PART, FAIL SECURE 1 2a LOCK ASSY., ELECTRIC(FAIL SECURE) 1 2b SCREW, 1/4-20X3/8" BFHCS 7 2c BRACKET, LOCK STRIKE (standard) 2 2d NUT, M6X e BOLT, HAMMERHEAD 2 2f NUT PLATE, 1/4-20 (not shown) 3 PAGE 13

22 SERIES 5100 TELESCOPE ELECTRIC LOCK ASSEMBLY KITS 1a 1c 1d 1e 1b ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE KIT, 6 PANEL TELE., FAIL SAFE 1 1a LOCK ASSY., ELECTRIC - FAIL SAFE 1 1b SCREW, 1/4-20X3/8" BFHCS 7 1c BRACKET, LOCK STRIKE (telescope) 2 1d NUT, M6X e BOLT, HAMMERHEAD 2 1f NUT PLATE, 1/4-20 (not shown) 3 2a 2c 2d 2e 2b KIT, 6 PANEL TELE., FAIL SECURE 1 2a LOCK ASSY., ELECTRIC(FAIL SECURE) 1 2b SCREW, 1/4-20X3/8" BFHCS 7 2c BRACKET, LOCK STRIKE (telescope) 2 2d NUT, M6X e BOLT, HAMMERHEAD 2 2f NUT PLATE, 1/4-20 (not shown) 3 PAGE 14

23 SERIES 5900 TRACKLESS ICU SO-SX (shown) 5900 TRACKLESS ICU LH (SO-SX) PAGE 15

24 SERIES 5900 TRACKLESS ICU PARTS LIST ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE COVER, ICU CL-DB HEADER, ICU CL-DB BRACKET, HEADER MNTING. - LH BRACKET, HEADER MNTING. - RH SIDE JAMB 1 3/4"X4 1/2" CL-DB JAMB FILLER CL-DB CARRIER ASSY., SLAVE DOOR PULL, RECESSED ICU DOOR WHEEL ASSY BOTTOM GUIDE CHANNEL - MF BLOCK, TRANSFER PIVOT TRACKLESS BOTTOM GUIDE ASSY.-LH 1 ~~~ TRACKLESS BOTTOM GUIDE ASSY.-RH WELDMENT, TORQUE BAR FLUSHBOLT, MANUAL CL-DB PIVOT ANGLE, TOP "PA1-L" PIVOT ANGLE, BOTTOM, TRACKLESS 1 (not shown) BEARING, FLANGED TRANSFER PIVOT ASSY. 1 uses stud CLEVIS PIN (not shown) BRACKET, SIDELITE PIVOT PIN, SIDELITE PIVOT SLIDE BLOCK STUD, SLIDE ARM (not shown) STOP LINK ARM >40" SLW STOP LINK ARM <40" SLW STOP LINK TRACK <40" SLW STOP LINK TRACK >40" SLW STOP BLOCK 1 ~~ TUBE ASSY., ANTI-BREAKOUT- CL-DB includes & END CAP (not shown) 1 ~~ DOOR PULL, SURFACE CL-DB ~ ~~ DOOR PULL, SURFACE CL-DB BACK ~ TO BACK ~~ DOOR PULL, SURFACE CL-DB OFFSET ~ ~~ DOOR PULL, SURFACE CL-DB OFFSET, BACK TO BACK ~ PAGE 16

25 SERIES 6100/8100 SWING DOOR OPERATOR 6 1 a b c d a b c d a PAGE 17

26 SERIES 6100/8100 SWING DOOR OPERATOR ITEM PART NUMBER DESCRIPTION QTY. REQ'D. LIST PRICE KIT, RKR. SWITCH,CABLE,INSERT,& SCREWS 1 a INSERT, COVER (SWITCH) 1 b ROCKER SWITCH ASSY. BDI MODULE 1 c CABLE, ROCKER SWITCH ASSY. 1 d SCREW, 2-28X5/16" Ph. PH PLASTITE, ZINC NUT PLATE, SQUARE,1/4-20 (1 hole) 12 typ END CAP, COVER SCREW, 8x1/2" Ph. PH SMS BL OXIDE SCREW, 1/4-20X3/8" ALLEN BH BL OXIDE 12 typ MF PLATE, OPERATOR MOUNTING, 6100/ MOUNTING SET, HARD STOP ADAPTOR 1 8a OPERATOR, COMPLETE DRIVE MODULE, 1 CONTROL, STOP SET, POWER SUPPLY, ROCKER SWITCH & CABLE 8b DRIVE MODULE, W/ CONTROL 1 8c OPERATOR, COMPLETE DRIVE MODULE, 1 CONTROL, STOP SET, POWER SUPPLY, ROCKER SWITCH & CABLE 8d DRIVE MODULE, W/ CONTROL SCREW 1/4-20X3/4" ALLEN BH, BL OXIDE CIRCUIT BOARD, SERIES 6100/8100 OPERATOR INSERT, PLAIN, COVER & END CAP 2 typ INSERT, SHAFT CUTOUT, COVER COVER, 6100/8100 CL-DB KIT, PLUG-IN TERM. STRIPS & JUMPERS J1 CONNECTOR, (CANBUS) J2 CONNECTOR, (AKA, AKI) J3 CONNECTOR, (AUX/SIO/SIS) J4 CONNECTOR, (EMERG. C/O) J5 CONNECTOR, (ALARM) J6 CONNECTOR, (VRR/VAK) HARNESS, ENCODER FUSE HOLDER 1 16a FUSE, 5x20, 2 1/2 amp, slow blow POWER SUPPLY, 6100/ BRACKET, CONDUIT ANCHOR HARNESS, PWR. SUPPLY>CONTROL (not shown) SHORTING BRIDGE (jumper),term. BLOCKS 3 typ SHORTING BLOCK for 0.1C/L POSTS 2 typ KIT, HEADER ACCESSORY PKG. 1 endcaps,inserts,screws,nut plates, decal MOTORDRIVE ASSY., MOTORDRIVE ASSY., ~~ COVER ONLY, MACHINING, SINGLE CL-DB 1 ~~ COVER ONLY, MACHINING, DUAL CL-DB 1 ~~ COVER & BACKPLATE ASSY.,SINGLE CL-DB (complete) 1 ~~ COVER & BACKPLATE ASSY.,DUAL CL-DB (complete) 1 PAGE 18

27 SERIES 6100/8100 ARM ASSEMBLIES ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE CL STANDARD ARM ASSY. w/20mm Adaptor 1 ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE CL SLIDE TRACK ARM ASSY. w/20mm Adaptor CL ARM ADAPTOR 80MM (3") CL ARM ADAPTOR 50MM (1 3/4") CL ARM ADAPTOR 20MM (1/2") CL OFFSET ARM ADAPTOR CL DOUBLE EGRESS ADAPTOR KIT 1 PAGE 19

28 SWITCHES and ACCESSORIES a 4 ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE CONTROL MODULE, DUAL ROCKER CONTROL MODULE, ROCKER/KEYSWITCH CONTROL MODULE, DISPLAY no cable - no plug 1 3a CONTROL MODULE, DISPLAY w/cable - w/plug ENCLOSURE, CONTROL MODULE CONTROL MODULE, DISPLAY with ENCLOSURE w//cable - no plug Battery Backup & Surge Protector Power / Reset Circuit Breaker OUTPUT INPUT Neutral / White (IN) Hot / Black (IN) Ground / Green Hot / Black (OUT) Neutral / White (OUT) DANGER High Voltage This unit stores power. Disconnect battery before servicing. 200VA DANGER High Voltage This unit stores power. Disconnect battery before servicing /2"W x 3 3/4"H x 2 3/4"D 2 4 1/2"W x 3 1/4"H x 1 3/8"D Uninterruptable Power Supply (UPS) BATTERY PACK, ( NICAD ) 1 PAGE 20

29 SWITCHES and ACCESSORIES ITEM PART NUMBER DESCRIPTION QTY. LIST PRICE FPC902 - FLASHPROGRAMMER AC ADAPTOR BATTERY CHARGER, FPC902 1 (D) (E) (F) (A) (B) (C) SAFETY BEAM SET, ea ea KIT,SAFETY BEAM WIRE ASSY., HEADER 1ea.(C) ; 1ea.(D) KIT, BEAM HEAD w/wire ASSY. 1 1-EMITTER - (F) & HARNESS - (E) 1-RECEIVER - (A) & HARNESS - (B) KIT, WIRE ASSY.,BEAM HEADS 1 2ea.(B) ; 2ea.(E) EMITTER, Black Wire -(F) RECEIVER, Gray Wire - (A) 1 PAGE 21

30 Automatic Sliding Door Comparison Chart record Stanley Horton 2000 Besam Uni slide Standard Warranty (complete unit) 2 years 1 year 1 year 1 year Roller Track Warranty Lifetime 1 year 1 year 1 year Roller Warranty 3 Year 1 year 1 year 1 year Rollers per panel* Operating Temperature Range negative 40 to 140 Fahrenheit negative 30 to 130 Fahrenheit negative 30 to 130 Fahrenheit negative 35 to 122 Fahrenheit Maximum Door Panel Weight 300 lbs. 220 lbs. 250 lbs. 220 lbs. Header Size* 4 1/2" x 7" 6" x 8" 4" x 6" 7 5/8" x 6 5/8" Break out panel control* Concealed Hydraulic Closer Limit Arm Torsion Spring Hydraulic Dampner (optional) Door Panel Construction* Mortise Block Through Bolts Mortise Block Mortise Block Diagnostics Exposed via LCD Stanley Personnel Only Horton Personnel Only Besam Personnel Only Life cycle counter Exposed via LCD Stanley Personnel Only Not Available Besam Personnel Only Safety Adjustments Software limits to ANSI Relies on Service Tech to comply Relies on Service Tech to comply Relies on Service Tech to comply Weather Stripping Extruded Channel in Door Panels Adhesive "stick on" weather stripping Extruded in Door Panels Extruded Channel in Door Panels Standard Safety Detection 2 infrared curtains, 2 beams 1 infrared curtain, 2 beams 2 infrared curtains, 2 beams 2 infrared curtains Uni Directional Motion Detection Standard Standard Standard Standard Bottom Guide Design* Round Pin=Anti Friction, Smooth, Quiet Fork Guide=Friction & Wear Round Pin Round Pin Power Consumption 100 Watts 650 Watts 300 Watts 250 Watts Motor Size**** 1/8 HP 1/4 HP 1/8 HP 1/8 HP * Rollers per panel : 4 rollers per panel allows weight distribution for smooth, quiet operation, no binding * Header Size : 4 1/2" wide header sits flush with standard storefront framing * Break out Panel Control : Hydraulic closer controls door panel in break out mode, limit arm creates rigid stopping point causing damage * Door Panel Construction : Mortise blocks lock the stile and rail in place adding structural integrity * Bottom Guide Design : Record's bottom pin guide is designed to reduce friction extending the life of the guide and threshold track **** Motor Size Please note the discrepancy in motor size, this is critical to explaining the difference between the two manufacturers. The Record 5100 utilizes an 1/8 HP motor compared to the Stanley which uses 1/4 HP motor. Efficient output of a drive train is achieved by gear reduction. Efficient gear reduction increases the amount of RPM, thus requiring less torque of the motors. Inefficient gear ratios require higher torque out of the motor, thus requiring larger motors. Please note the power consumption difference note above. The power consumption difference is quite large as noted above. The difference exists because very little gear reduction is being used by the Stanley drive train requiring more torque out of the motor, consuming six times more power than the meticulously engineered record drive train. In addition to the increased power consumption, the motor life is significantly reduced with the exponential amount of torque required due to the lack of gear reduction

31 AAADM American Association of Automatic Door Manufacturers AUTOMATIC SLIDING DOOR OWNER'S MANUAL Distributed by: Contents Section Page Caution 2 To Our Customers 2 Service Availability 3 Compliance with Safety Standards 3 What You Should Know 3 Daily Safety Check 4 Operation 7 Limited Warranty 8 3/6/06 1

32 CAUTION An Improperly Adjusted Door can cause injury and/or equipment damage. Inspect door operation daily using safety checklist in Owner's Manual and at door. Have door adjusted as described in Owner's Manual. Safety devices should be in place and operational. Have door inspected at least annually by an AAADM certified inspector. In the following manual, the word: Caution means that injury or property damage can result from failure to follow instructions. Note is used to indicate important steps to be followed or important differences in equipment. To Our Customers The purpose of this manual is to familiarize you with your automatic door system. It is essential that you "know your system" and that you recognize the importance of maintaining your door system in compliance with the industry standards for safety. It is your responsibility, as owner or caretaker of the equipment, to inspect the operation of your door system on a daily basis to ensure that it is safe for use by your invitees, customers, or employees. This manual will provide you with a description of the operation and maintenance requirements of your door. It also provides the instructions for the Daily Safety Check. Should the door fail to operate as prescribed in the Daily Safety Check, or at any other time for any other reason, do not attempt to repair or adjust the door. Call an AAADM Certified service technician. These technicians are trained to service your door in accordance with applicable industry safety standards. 3/6/06 2

33 Service Availability Automatic door products are distributed through a nationwide network of authorized automatic door suppliers for sales, installation, and service. Should you need service on your door system, consult the respective door manufacturer or its authorized representative. Compliance with Safety Standards Your door system was designed to the latest operating and safety standards. In order to ensure the continued safe operation of your door, it is important that: - Your door system be maintained in compliance with the standards of the industry. - Proper decals and labels be applied and maintained on your doors. If decals are removed or cannot be read, request labels to be replaced when calling for service. - Automatic doors should be checked by an AAADM certified inspector at least annually. AAADM, the American Association of Automatic Door Manufacturers, has established a program to certify automatic door inspectors. Through this program, the inspectors are trained to check your door systems for compliance with the appropriate version of the American National Standards Institute standard ANSI/BHMA A What You Should Know Be sure that an automatic door supplier has provided the following for each door: 1. Instruction on how to conduct the Daily Safety Check * (by walk-through example). 2. Location of function switches and instruction in their use. 3. Circuit breaker or main power disconnect location for each door system. 4. Number to call for service or questions about your system if you are uncertain of any condition or situation. 5. AAADM inspection form or a work order signed by an AAADM certified inspector. 6. A completed Annual Compliance Inspection label, located at the bottom of the Safety Information label affixed to the door. 7. Warranty information for each door. Note: If there are any problems, or if you are unsure about the safe performance of the door, discontinue door operation immediately and secure the door in a safe manner. Call your authorized automatic door professional for repairs. * Note: AAADM Daily Safety Check videos are available. Contact an automatic door supplier or AAADM. Automatic sliding doors are installed in a variety of combinations. Single or Bi-parting Sliding Door Swings out in emergency with fixed sidelite Sliding Door Swings out in emergency and sidelite also swings out One-Way Traffic or Two-Way Traffic Activated by Floor Mat, Sensors, or Push Switches They always require a Safety Zone to cover the area in or near the door travel. 3/6/06 3

34 Daily Safety Check (All figures and diagrams are for purposes of illustration only) Perform the following safety checks daily on each automatic sliding door to ensure your customers' safety and your own protection. Perform these tests while traffic is restricted from all detection and sensing zones. Sensor Activation Figure 1 Figure 2 1. Check electronic sensor by walking toward the door opening at a moderate speed. The door should start opening when you are about four feet from the door, should slide open smoothly, and stop without impact. Repeat on other side of opening. Move slowly through the door opening (6 inches per second). The door should remain open. (See Figures 1 and 2) NOTE: If your door is set up for one-way traffic, the sensor on the side not intended for approach should be active until the door is within 6 inches of fully closed. The sensor should re-open the closing door if a person is detected a minimum of 24 inches from the door. 2. Step out of the sensor zone. After a brief time delay (at least 1 1/2 seconds) the door should slide closed smoothly and should close fully without impact. Doors should be adjusted so they do not close faster than 1 foot per second. 3. Observe traffic routing to the door. Plan traffic routing so persons will approach the door straight on and not from an angle. Figure 3 4. Walk parallel to the door face and towards the center of the door opening to check that the detection pattern is at least as wide as the door opening. This test should be performed within approximately 12 inches from the door face. Repeat this test in both directions. 5. Open the door. Crouch motionless in threshold for at least 10 seconds to check safety zone. The door should not close. Floor Mat Activation 1. Step on the "opening" (activating) mat in several places. Door should slide open smoothly and stop without impact. (See Figure 3) 3/6/06 4

35 2. Step through the doorway onto the mat on the other side. Door should remain fully open without interruption. AUTOMATIC DOOR Figure 4 IN EMERGENCY PUSH TO OPEN Figure 5 STAND CLEAR Figure 6 Note: If there is more than one mat on each side, each mat should be tested. 3. Step off the mat. After a brief time delay (at least 1 1/2 seconds), the door should close slowly and smoothly without impact. Doors should be adjusted so they do not close faster than 1 foot per second. 4. Check the mat molding and threshold. It should be complete and secured with all screws required. General Safety Pay attention to the following general safety items and conduct checks periodically where noted. 1. Signage. Door should have decals properly displayed. There should be decals that include the statements: "AUTOMATIC DOOR" (in letters 1/2 in. high, minimum) and "IN EMERGENCY - PUSH TO OPEN". An adjacent sidelite or wall should have a STAND CLEAR or similar decal in the slide path of the door (See Figures 4, 5, 6, 7, and 8 for examples of some decals that may be used.). An AAADM safety information label should be affixed to the door frame in a visible, protected location. Figure 7 2. Closing Speed. The closing time of the door must not be less than the minimum time as shown in the following table. This closing time is taken from full open to a point six inches from fully closed. Example: If a single slide door with a nominal opening of 36 inches closes in 2.3 seconds it is too fast and must be slowed down. If it closes in 3.0 seconds it is in compliance. Maximum Closing Speed - 1 Foot Per Second Figure 8 Nominal Door Opening Minimum Closing Time to Single Bi-Part Within 6 inches of Closed Slide 48" 2 Sec 60" 2½ Sec 36" 72" 3 Sec 42" 84" 3½ Sec 48" 96" 4 Sec 3. Force to prevent the door from closing should not exceed 30 pounds. This can be measured with a force gauge. 3/6/06 5

36 AUTOMATIC DOOR ACTIVATE SWITCH TO OPERATE Figure 9 4. Activating Switch. (Knowing Act) Doors equipped with a manual operate switch shall, when activated, hold the door open for five seconds minimum after release of activating switch. Doors equipped with manual activating switch shall have a decal as follows: AUTOMATIC DOOR. ACTIVATE SWITCH TO OPERATE. The sign should be visible from both sides of the door or the side with the knowing act switch if there is only one. (See Figure 9) 5. Emergency Breakout. Test by manually pushing door at lock area in direction of emergency exit. Release door. The door should either stop operation or spring to closed position. Make sure door panel or panels are properly relatched. Figure 10 If the door is equipped with breakaway sidelites, door operation should stop when sidelites are broken out. (See Figure 10). 6. Housekeeping. Be sure floor guides are kept clean and free of any debris which could prevent proper door slide. Check the door area for tripping or slipping hazards. Check all door panels for damage. Make sure that all hardware and overhead covers are properly secured. There should be no bulletin boards, literature racks, merchandise displays, or other attractions that would interfere with the use of the door or invite people to stop or stand in the door area. 7. Traffic Patterns. Observe traffic patterns. Plan routing so people enter and exit in a straight approach, directly towards the center of the door opening. IF YOU HAVE A PROBLEM, TURN OFF THE DOOR OPERATING EQUIPMENT AND CALL AN AUTOMATIC DOOR SUPPLIER TO MAKE PROMPT REPAIRS. 3/6/06 6

37 OWNER S MANUAL - SERIES 5100 CONTROL PANEL The Series 5100 Sliding Door System includes an electronic control panel to select the operating mode of the door, and provide feedback on the door status. Included are five pushbutton / keys- OFF turns off automatic motion and allows the door to be moved manually. Note 1: Depending on door configuration, this may close & LOCK the door. Note 2: When in the OFF/LOCKED mode, pressing the OFF key a second time will momentarily open the door to allow egress; after an adjustable delay, the door will close and return to the OFF/LOCKED mode. AUTO enables automatic operation with response for both ingress and egress. EXIT enables automatic operation for egress traffic only. OPEN automatically opens the door and remains open; pressing a second time will place the door in Manual mode allowing easy re-positioning of the door. PROG selects the percentage of opening for the above modes. When pressed momentarily, the auto- matic opening is changed from a full opening to a reduced opening, indicated on the display by the additional phrase PART L and small arrows above the mode icon. Press the key a 2nd time to revert back to full open operation. If the key is pressed and held for 8 seconds, a bar graph is displayed indicating the percentage of full opening that will be used in Partial opening. To change the partial open width, press the AUTO key to increase, or the OFF key to decrease. The bar graph will indicate the revision. When finished, press the record key to select the new setting. The control panel includes a backlit display providing confirmation of the above mode selection, reminders of safety checks and phone numbers, and will additionally indicate when the system has an abnormal operating status. Abnormal status indication is in the form of a short text description of the anomaly. Examples include Emergency Breakout Safety Beam actuated > (for more than) 60 sec., Obstruction, etc. The user may be able to resolve some issues without requiring a service call. Certain door status will require an authorized technician to service the door, and their phone number can be accessed by momentarily switching the door OFF, then back on (AUTO, EXIT, or OPEN), and the phone number will momentarily display. Using the above examples Emergency Breakout - indicates one of the door panels has been broken EMERGENCY out and has not been fully reset into the closed position. Each door STOP/BREAKOUT panel should be inspected and closed properly Safety Beam ELS active>60s Obstruction OPEN C AUTO - E + Additional screens provide similar information concerning the door sensors and operator components. A small key displayed on the left side of the screen indicates a remote override switch has disabled the panel. If the message Control Panel can t override is displayed when attempting to change operator modes, a second control panel (or remote control interface) is connected to the door and has priority. The control panel can be locked, preventing unauthorized use, by pressing the key sequence - PROG OFF A small square with an X will appear on the left of the display. + + Safety Beam > 60s(econds) - indicates one of the four safety beam heads (two located on each side of the opening) has been blocked. Remove objects that may be obstructing a clear line-of-sight between opposing beam heads. Obstruction - indicates the door(s) has encountered significant resistance in either opening or closing and cannot move without exceeding code limited forces. Inspect the bottom guides, weatherstripping, etc., around the perimeter of the door and in the door s path of motion. Note: After an obstruction ocurrs, the next operation of the door will approach the obstruction point at a reduced speed; normal speed is resumed after traveling through the obstruction point without impediment. To re-enable the keypad, repeat the above sequence. OFF PROG EXIT AUTO To reset the door operator, press the button for 8 seconds. The screen at right will appear. Press the button again to initiate a software reset; normal operation should resume in a few seconds. If not, contact your local record dealer 7 No Reset control? Yes Sep 07

38 Warranty record-usa DOOR SYSTEMS WARRANTY We warrant to the buyer that record-usa door systems have been manufactured from highgrade materials with first-class workmanship. Subject to the other conditions of this Warranty, if any parts of our own manufacture prove defective under normal use and service within two years of installation (6100 swing series within one year of installation), we shall repair or replace such parts free of cost. If any equipment or parts not of our own manufacture are utilized in connection with this door operator and equipment, we shall assume responsibility and liability for defects only to the extent of such adjustment as the manufacturer thereof makes to us. It is the responsibility of the buyer to furnish all labor and expense necessary to replace the part. The warranty shall not extend beyond two years from the date of purchase regardless of any replacements, which may be made. Our obligations under this Warranty are conditional upon the buyers having (1) given us prompt written notice of alleged defects, and (2) upon our request, returned the allegedly defective item(s) within 30 days to our works in Monroe, North Carolina, freight prepaid, for our inspection. We shall have no obligation or liability, under this Warranty or otherwise, in the event of 1) improper installation or application of product; 2) misuse, neglect or accident; and 3) installation, service, repair or alteration in any way by any person not expressly authorized in writing for such purpose. However, in no case shall we have any obligation or liability beyond two years after original installation or any replacement or repairs that may be made. We reserve the right, without obligation, to inspect all installations of record door operators and equipment for the protection of both the end user and ourselves. In no event shall we have any obligations or liability, under this Warranty or otherwise, resulting in whole or in part for damage to defects in the door operator or equipment caused by abuse, misuse, malicious mischief, acts of God, casualty, improper handling or the negligence of the owners or others. Nor shall we have any obligations or liability for any loss, cost or expense incurred in the repair or replacement of the door operator or equipment except on express written authority from our office in Monroe, North Carolina. The buyers sole remedy against us for any alleged defects in the record door operator or equipment shall be as provided in this Warranty. We hereby disclaim all other obligations and liability for damages, including any incidental consequential damages. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This Warranty may not be changed, expanded or modified in any way except in writing, signed by our duly authorized representative. record-usa 4324 Phil Hargett Court, Monroe, NC PO Box 3099 Monroe, NC (704) Voice (800) WATTS (704) FAX