HARDWARE DURHAM BOLTS. EST. SHIPPING WEIGHT(lbs) UNIT CTN CTN CTN CTN CTN
|
|
|
- Ethelbert Melton
- 5 years ago
- Views:
Transcription
1 PAGE 22 DURHAM BOLTS SB 0 SB 00 SB 000 SB 0 SB 02 SB 0 SB 05 SB 07 SB 09 SB 8 SB 80 SB 800 SB 8 SB 82 SB 8 SB 84 SB 85 SB 87 SB 89 SB 6 SB 60 SB 600 SB 6 SB 62 SB 6 SB 64 SB 65 SB 66 SB 67 SB 68 SB 69 SB 60 SB 6 SB 62 SB 6 SB 00 SB SB 2 SB SB 4 SB 5 SB 6 SB 7 SB 8 SB 9 SB 0 SB SB 2 SB SB SB 7 /4 2 /4 2 /4 2 2 /4 /4 /2 /4 4 /4 2 2 /4 /4 /2 /4 4 4 /2 5 Hex Head Machine Bolts PLATING: Above bolts available tin plated. Add suffix letter P to the above catalog numbers. For sizes not listed consult factory for delivery. SILICON BRONZE Phone Fax TOLL FREE (Outside CT)
2 PAGE 2 DURHAM BOLTS SB SB 2 SB SB 4 SB SB 6 SB 7 SB 8 SB 9 SB 0 SB 2 2 /4 /4 /2 Hex Head Machine Bolts (Cont.) SFW 0 SFW 8 SFW 6 SFW SFW (IN) /4 5/6 / Flat Washers SLW 0 SLW 8 SLW 6 SLW SLW /4 5/6 / Split Lock Washers SN 0 SN 8 SN 6 SN SN PLATING: Available tin-plated, add suffix P to above catalog number. For sizes not listed consult factory Hex Nuts SB TYPICAL APPLICATION SET SFW SLW SN RECOMMENDED TORQUE VALUES Pg. 26 Phone Fax TOLL FREE (Outside CT)
3 PAGE SS 0 SS 00 SS 000 SS 0 SS 02 SS 0 SS 05 SS 07 SS 09 SS 8 SS 80 SS 800 SS 8 SS 82 SS 8 SS 84 SS 85 SS 87 SS 89 SS 6 SS 60 SS 600 SS 6 SS 62 SS 6 SS 64 SS 65 SS 66 SS 67 SS 68 SS 69 SS 60 SS 6 SS 62 SS 6 SS 00 SS SS 2 SS SS 4 SS 5 SS 6 SS 7 SS 8 SS 9 SS 0 SS SS 2 SS SS SS 7 /4 2 /4 2 /4 2 2 /4 /4 /2 /4 4 /4 2 2 /4 /4 /2 /4 4 4 /2 5 Stainless Steel Hex Head Machine Bolts For sizes not listed, consult factory for delivery. Phone Fax TOLL FREE (Outside CT)
4 PAGE BELLEVILLE WASHERS Belleville disk spring washers, made of tempered stainless steel, are used to maintain load or tension in bolted assemblies. High tension is maintained, compensating for differential thermal expansion of dissimilar metals. The bolted tension is distributed over the lug tang for the diameter of the Belleville disk, providing greater contact to the pad SSBW 6 SSBW /8..45 FLAT WASHERS SSFW 0 SSFW 8 SSFW 6 SSFW /4 5/6 / SPLIT LOCK WASHERS 796 SSLW 0 / SSLW 8 5/6. 79 SSLW 6 / SSLW.65 SSN 0 HEX NUTS 7886 SSN SSN SSN TYPICAL APPLICATION SET SS SSFW SSLW SSN RECOMMENDED TORQUE VALUES Pg. 26 Phone Fax TOLL FREE (Outside CT)
5 PAGE 2 Security Hardware Tork-Away connections are reliable, secure and safe. When the pre-set torque is applied, the hex portion breaks off. This is visual, inspectible proof that the proper torque has been applied. The result is a smooth conical shape which is virtually impossible to grip with any tool, so the connection is extremely tamper-resistant, vandal-resistant, and safe. Tork-Away security hardware is stainless steel nuts and/or bolts for maximum corrosion resistance. Reliability Tork-Away assures the proper installation torque, so the integrity of the electrical joint is inspectible and assured.. Screw on nut as shown Security Tork-Away provides a safe connection which cannot be removed without destroying the hardware virtually tamper-proof and vandal-proof. Installability Tork-Away is installed with common tools no molds, no flames, no weather limitations. Inspectability Tork-Away is easily inspected when the hex portion is gone, the proper torque has been applied and a reliable, safe connection is assured. 2. Tighten to shear-off hex Irreversible A Tork-Away connection cannot be removed without destruction. Numerous Greaves products are available with the Tork-Away feature:. Remove hex head U-bolt clamps CH, CG (Fig 2) Ground rod clamps G0 I-beam clamps GBC40, GBCL Universal Ground Clamps CX Stainless steel hardware for lug mounting Fence Ground Clamp GFGC Phone Fax TOLL FREE (Outside CT)
CTN QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473. Two-Hole NEMA CTN QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 2000 2002 998 999 2004 200 200 2005 200 2008 207 2007 2009 200 20
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
Ground Connectors All Copper Alloy Specification Grade
Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Newport Harbor Mate Utility Center
Newport Harbor Mate Dimensions Height: 14.50" (368.30 mm) Width: 10.50" (266.70 mm) Depth: 10.40" (264.16 mm) Newport Harbor Mate Utility Center Diagram 2.77" Approximate Weight: 11 lbs. (5.0 kg) 10.31"
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Hatteras Light Pedestals
Hatteras Light Power Pedestal Dimensions Height: 31.00" (787.40 mm) Width: (190.50 mm) Depth: (190.50 mm) Hatteras Light Base Diagram Approximate Weight: 14 lbs. (6.4 kg) 1.73" UL FILE # E133781 Ø0.41
Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
No-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together Recognized by UL and cul STATES Type have
Marina Power and Lighting, Inc. General Specifications for the Newport Harbor Mate
Marina Power and Lighting, Inc. General Specifications for the Newport Harbor Mate All Power Pedestals Must Meet the Following: Part I. General: 1.1 General Requirements- A.) Shall be tested and certified
General Specifications for Lighthouse Power Pedestal
Dimensions Height: 44.00 11 (1117.60 mm) Width: 13.67" (347.22 mm) Depth: 13.75" (349.25 mm) Lighthou98 Base Diagram ---13,75 1 --- Approximate Weight: 30 lbs. (13.6 kg) Multiply base dimensions by 25.4
15-kV Wall-Mount Switchgear Three-Phase Indoor/Outdoor 600 Amp S&C Mini-Rupter Switch
Page 1 2015 Kinked roof prevents standing moisture Glass reinforced barriers meet NEMA GPO-3 Standards 0.625" diameter copper ground bar Elliott air-insulated bushings accept IEEE Standard inserts and
High barriers Recognized by UL and cul Self-extinguishing materials Nonferrous material Corrosion-resistant nickel finish Safety-grip handle A complete line of switches is available for meter, relay, instrument,
FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
Underground Distribution
Aluminum Universal Quick Disconnect Transformer Connectors The EZ Mount connector is used on padmount distribution transformers that have a 5/8 in. or 1 in. secondary bushing stud one mounting hole accepts
Fuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
Type SJK Test Switches
Type SJK Test Switches No-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together DESCRIPTION STATES
Harbor Light Model HL General Specifications
Harbor Light Model HL30100 General Specifications Rev.5 02-02-17 Marina Electrical Equipment, Inc. 100 Warwick Court Williamsburg, VA 23185 Toll Free: 1-855-258-3939 Fax: 1-757-258-3988 ALL HARBOR LIGHT
15-kV Live Terminal Primary Metering Station Pad-Mounted Outdoor
ulletin Page 1 2015 Cross-kinked roof prevents standing moisture Metering Transformer compartment label is visible with doors closed Heavy duty 11-gauge steel enclosure is all-welded construction for long
SAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories
SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
2M Series Contacts and Tools
Crimp Type AMPS #23 #20HD #20 #16 #12 AWG Part Number Color Band 1st 2nd 3rd #22-#28 2M809-001 N/A N/A N/A #26-#30 2M809-042* Blue N/A N/A 5 Socket #22-#28 2M809-002 N/A N/A N/A Socket #26-#30 2M809-043*
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Floodlighting Accessories
GLARE SHIELDS Catalog Approx. Number Item Wt. (lbs.) 6" (152) 75-GS ULTRA FLOOD GLARE SHIELD 2 Manufactured of corrosion-resistant aluminum. 75-VS For use with Ultra Flood, Series 75. Standard 14-3/4"
SPECIFICATION BULLETIN
SPECIFICATIONS Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply, except as modified under WARRANTY QUALIFICATIONS on page 3. SPECIAL TO THIS PRODUCT:
Before beginning this installation read the instruction sheet thoroughly. Check that all parts on parts list are present.
INSTALLATION INSTRUCTIONS C2085 SLIDE-A-LINK, FORD F-150/LIGHTNING The Slide-A-Link by Competition Engineering is designed for use in 2 Wheel Drive Ford Lightning Pickups. The rigid front mount assembly
C1000 Series Automatic Cap Bank
C1000 Series Automatic Cap Bank Metal Enclosed - Medium Voltage Capacitors Assemblies Fixed / Auto Medium Voltage 5, 15, 25 and 35 kv Class Customized to your specifications The Reactive Power Solution
Lighthouse Power Pedestals,
Lighthouse Power Pedestal One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features. With units in service around the world, this stylish power pedestal is recognized
Type MTS Miniature Test Switches
Type MTS Miniature Test Switches o o o o Compact and versatile Front- and back-connected styles Safe, durable, rugged and reliable Recognized by CUL & UL DESCRIPTION In many panelboard, switchgear, metering,
Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
AFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
Series 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
Series 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
HANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
25 kv Apparatus Bushings
Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation
25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
35-kV 200-kV BIL Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 35 kv Separable Insulated Connector (elbow) Bus Bar or Other Component Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
Wire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
35-kV Safefront 200 Amp SuperWell Primary Metering Station Pad-Mounted Outdoor
35-kV Safefront 2 Amp SuperWell 5-33 Page 1 216 EPM-PMS-35-311P-R2/ESW Three Phase Two Ways per Phase 2 Amp 35 kv Class Eaton's CPS LRTPs NEMA Standard Outdoor Instrument Transformer Provisions 21.1/36.6
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
Steel Fabrications Equipment Brackets
April 2004 Page 25 of 43 H. R. Steel; Each bracket includes (2) 1/2 x 1 hex bolts, flat washers, and special retaining clips as well as (1) 1/2 x 2 captive carriage bolt, shake proof washer, lockwasher,
Parts Catalog MIXER MODEL: SP8-RL
Parts Catalog SP8-RL Mixer MIXER MODEL: SP8-RL 08-04-14 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 2215 East
Start-up and Operation
Start-up and Operation NEVER FORGET THAT ANY MACHINE CAN BE VERY DANGEROUS WHEN NOT OPERATED CORRECTLY AND SAFELY. ALWAYS VISUALLY CHECK TO MAKE SURE THAT ALL PERSONS ARE CLEAR BEFORE TURNING ON ANY CONTROLS.
35-kV Safefront SuperWell Mini-Switch Source Isolated Pad-Mounted Switchgear 50 Amp (Max) Clip-Mounted Current Limiting Fuses
Page 1 2016 EPMR-35-311S-R2/ESW-CM9 Three Phase Two Ways per Phase 200 Amp 35 kv Class Eaton s CPS LRTPs 50 Amp (Max) 27 kv Clip-Mounted NX Fuse Provisions 21.1/36.6 kv Grounded Wye Max Design, 150 kv
Installation Instructions for Replacement Mechanism Kit
s Siemens Industry,Inc. Item: Replacement Switch Kit Catalog Numbers HM6123 & HM6123S For use with: 30-100 Amp VBII Safety Switches Page 1 of 5 SAFETY INSTRUCTIONS NOTE: This instruction outlines the recommended
INSTRUCTIONS-PARTS LIST. Kit, Swivel Wheel. Line Lazer 3500, Model , Series A. Old Caster Wheel Removal. Rev. D
INSTRUCTIONS-PRTS LIST This manual contains important warnings and information. RED ND KEEP FOR REFERENCE. 308943 Rev. D INSTRUCTIONS Kit, Swivel Wheel Line Lazer 3500, 5000 Model 241105, Series Old Caster
35-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 35 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
INSTALLATION & MAINTENANCE MANUAL HI LPD SERIES LOAD POINT ASSEMBLY Calle Fortunada San Diego, CA
INSTALLATION & MAINTENANCE MANUAL 3860 Calle Fortunada San Diego, CA 92123-1825 Phone: 1-(800) 821-5831 Web Site: hardyinst.com (858) 278-2900 Fax: (858) 278-6700 HI LPD SERIES LOAD POINT ASSEMBLY NOTICE
15-kV Safefront 200 Amp Source Isolated Cable Switching Station Pad-Mounted Non-Fusible
ulletin Page 208 -gauge steel equipment plate is rigid for easier elbow operation Heavy-duty -gauge steel enclosure is all-welded construction for long life "Elbows" compartment label is visible with doors
230 kv Aluminum Welded Couplers TYPE or Straight Adapter Tube To Cable
TYPE 14700 Straight Adapter Tube To Cable Adapter is designed to make inline connection between pipe and stranded cable. Cable is puddle welded to connector; connector is then welded to tube. Not recommended
BREEZE Hi-Torque Liner Clamps
BREEZE Hi-Torque Liner Clamps This is the original and still the strongest worm-drive clamp available. Use it where conventional clamps are inadequate or in applications where double and triple clamping
Please take time to read and understand these installation instructions.
Please take time to read and understand these installation instructions. We recommend that the installation of this system be performed by a qualified service center or professional muffler installer who
Insulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
25-kV Apparatus Bushings A Series (clamp-in) for Elbow to Air-Insulated Service 200 Amp and 600 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 15 kv or 25 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
Parts Catalog SLICING MACHINES
Parts Catalog Model 4600P SLICING MACHINES MODELS: 4600P, 4975P & 493 05-0-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
*Patent Pending Design*
*Shown with optional Angled Tire Mount Part # 94202 *Patent Pending Design* Components 1) Rear Bumper 1) Swingarm 1) Swingarm Stop Bracket 1) Assembly 1) Rear Door Plate 1) Lower 3rd Brakelight Bracket
Project: Type: Qty: Height Lamping Finish Voltage Options. Series MTRQ /8" (1252mm) /16" (551mm) Options
Project: Type: Qty: _ Series Height Lamping Finish Voltage Options Series Height Lamping Finish Voltage Options MTR Square Column 2 2 ft. 4 4 ft. 6 6 ft. Metal Halide 2H050 (2x)50w 2H070 (2x)70w T8 2T8
Installation Manual GM Rotary Compressor Mount
Installation Manual GM Rotary Compressor Mount Small Block Chevy LWP Compressor Mount - 06-297 Pontiac Compressor Mount - 06-403 Oldsmobile Compressor Mount - 06-800 Congratulations... You have just purchased
4000 Series Exit Devices Premier Product
4 4000 Series Exit Devices Premier Product Certification & Compliance: u ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
Flaming River Ind. 800 Poertner Dr Berea, OH Thunderbird Rack and Pinion Conversion Kit
Flaming River Ind. 800 Poertner Dr Berea, OH 44017 800-648-8022 55-57 Thunderbird Rack and Pinion Conversion Kit Thunderbird Rack & Pinion System Note: For safety, disconnect battery cables and ensure
Mid-West Instrument. Diaphragm Type Differential Pressure Gauge & Switch Model 130. Shown here with Range 0-5 H2O
Diaphragm Type Differential Pressure Gauge & Switch BULLETIN NO. 130/11 (SUPERSEDES BULLETIN NO. 130/02) is a rugged general purpose differential pressure gauge with a 4-1/2" round dial. Common Applications:
XC SERIES CYLINDERS. An ASSA ABLOY Group company
XC SERIES CYLINDERS Table of Contents Page Key Management Software 1 Features, Benefits & Components 2 Bored and Auxiliary Lock Cylinders 3 Mortise/Rim Cylinders, Rosettes & Blocking Rings 4 11-7300B Interchangeable
MXSA Manual Push/Manual Lift Stackers Service Manual
MXSA Manual Push/Manual Lift Stackers Service Manual LIFT PRODUCTS INC PO BOX 349 ELM GROVE WI 53122 262-521-5720 FAX 262-521-5725 Toll Free 877-543-8776 Model: MXSA Series (MXSA-2200-63, MXSA-2200-98)
PD3/PDV3-20A/25A/40A Series
Pilot operated 2-port valve for dust collector control (Large port size dust collector valve) PD3/PDV3-20A/25A/40A Series Air operated/with solenoid valve Port size: Rc3/4, Rc1, : Rc1 1 /2-: φ48, Rc1 1
WHEEL HARDWARE & ACCESSORIES
P.O. Box 640-4665 Durham Rd. Beamsville, Ontario L0R 1B0 Phone: (905)945-1010 Fax: (905)945-4415 E-Mail: orderdesk@autodynamicsinc.com Website: www.autodynamicsinc.com WHEEL HARDWARE & ACCESSORIES 2015
Style Made Easy DECORATIVE HARDWARE CATALOG 10 SUPPLEMENT
Style Made Easy DECORATIVE HARDWARE CATALOG 0 SUPPLEMENT Style Made Easy Everyone at Berenson is dedicated to delivering not simply the best products, but the best customer experience. CONTENTS We exceed
BRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
Enclosed Cable System with Portable Lowering Tool for Drop Ceiling Mount * Manual System for Indoor and Outdoor Use.
ECS-400-XXX-3P-4C FOR FIXTURES WEIGHTING FROM 20 TO 400 LBS. Enclosed Cable System with Portable Lowering Tool for Drop Ceiling Mount * Manual System for Indoor and Outdoor Use. Solid Structure Support
Also Available in All-Metal Model BW-044
BugWrench is setting tool standards for utility linemen. Our new Heavy-Duty BW-244 offers a unique combination of 4-in- wrenches. This reversing ratchet Bugwrench has two separate sizes on each end (/2
Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Automatic Insertion Heated Regulator High Voltage Model IHRA-4SS-220/230 100 or more inch insertion length The information in this manual has been
Heavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:2000 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
15-kV Live Terminal 600 Amp Group Operated Pad-Mounted Metal-Enclosed Outdoor Switchgear 140 Amp (Max) Clip Mount Current-Limiting Fuses
Page 1 2015 Heavy duty 11-gauge steel enclosure is all-welded construction for long life Corrosion proof nameplate is located to provide easy access for the operator Glass reinforced barriers meet NEMA
Disconnect & ByPass Switches
Disconnect & ByPass Switches Disconnect & Oil Circuit Recloser Bypass Switches; Regulator & Current Transformer Bypass Switches Electrical Apparatus K-SEC 060 & 090 Contents Type D-73 Distribution Class
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
UltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout
Fusing Equipment Catalog Data CA132035EN Supersedes November 2015 COOPER POWER SERIES UltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout Description Eaton has set a standard
Product Manual MNX10003 / REV C MODEL MH130 MODEL MH101-1B MODEL MH107-1B / MH107-1A MODEL MH118
Product Manual MNX10003 / REV C MODEL MH130 MODEL MH101-1B MODEL MH107-1B / MH107-1A MODEL MH118 Mounting Hardware 1/06/2009 1 Contents Section I Overview Introduction..... 2 Description...... 2 Section
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
Rail Vehicle Systems ... PC Rev. E (4/14/16) -en ... Parts Catalog. KRD-482-E Slack Adjuster Assembly
Rail Vehicle Systems...... PC-783901 Rev. E (4/14/16) -en...... Parts Catalog Assembly Contact address New York Air Brake 748 Starbuck Avenue Watertown, NY 13601 USA Phone: +1 315 786 5200 Fax: +1 315
Pipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
DE Down Light. Quick Facts. LED Down Lights. Straight Shroud
LED Down Lights PROJECT CATALOG # TYPE NOTES Straight Shroud DE Down Light DESIGNER PLUS Practical directional down light in 1, 3, 6, or 9 LED. Aluminum construction. An RGBW version is also available
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
INSTALLATION & OWNER S MANUAL
Rev. R p. 1 of 16 INSTALLATION & OWNER S MANUAL V4211 HARD SIDED CAB KIT and/or V4275 CAMO HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner.
For Technical Assistance, call Competition Engineering's Tech Line at (203) , 8:30am-5:00pm Eastern Time COMPETITION ENGINEERING
INSTALLATION INSTRUCTIONS C2099 SLIDE-A-LINK The Slide-A-Link by Competition Engineering is designed for use in Stock Eliminator and Bracket Racing vehicles. The rigid front mount assembly clamps around
Quick Facts LED DIRECTIONAL FIXTURES
TYPE CATALOG # PROJECT NOTES Optional Long Shroud LED DIRECTIONAL FIXTURES dcrest-13 12.3"/31.2 cm Unique inside and out. Crest s curvilinear, organic shape reflects its coastal design inspiration. Crest
GuardShack Enclosures has more to offer than backflow cages. We have a great selection of associated products to compliment our line of the most specified enclosures in the industry. Some Of Our Top Selling
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PTS SLICERS (INCLUDES MOTOR PTS) 8PS 8RS ML-089 ML-090 A product of HOBT CORPORATION 70 RIDGE AVENUE TROY, OHIO 7-000 FORM 9 (0-9) 8PS/8RS SLICERS REPLACEMENT PTS 6-7 - - PL-97 PT
CONTENTS ComboGear Updated 5/17/2016
MASTER CONTENTS Updated 5/17/2016 Contents Features / Benefits...CG-2 Specification...CG-4 How To Order...CG-4 Nomenclature...CG-4 Easy Selection...CG-5 Selection Using Rating Tables...CG-12 Dimensions...CG-23
B BASIC HEAT TREATMENT CONSOLE
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
CON EDISON EQUIPMENT
CON EDISON EQUIPMENT Con Ed Navtech Size Volts Amps List Spec. Cat. No Description Price 205 N-205 10x10x5 100 $72.00 205 RTN-205 10x10x5 100 190.00 215 N-215 24x12x8 200 144.00 215 RTN-215 24x12x8 200
TERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
TABLE OF CONTENTS BURNDY. Hardware. DURIUM Hardware Bolts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers D-2 D-3 D-3 D-3 D-3
URNDY DURIUM olts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers TALE OF CONTENTS D-2 D-1 Aluminum olts Nuts Flat Washers Split Lockwashers Galvanized Steel olts Nuts Flat Washers Internal
Precision Service OBSOLETE 100MM STAINLESS STEEL GAUGES. (Subject to available inventory) SPECIFICATIONS DIMENSIONS ACCURACY CASE SIZES CASE MATERIAL
ASME Grade A ±.0% of range 00mm diameter (4") 304 CASE STYLES UC U-Clamp Mount FF Front Flange Mount 36 4" NPT lower or lowerback connection 30 to 0,000 psi Dual scale psi and kpa Aluminum, black painted
Distributed by Tri-State Equipment Company Inc
COFFING LHH Models - Stamped steel hand chain hoists are an excellent low cost option in the Coffing line. The compact, lightweight design is ideal for construction and contractor applications where portability
P R O D U C T C A T A L O G
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. P R O D U C T C A T A L O G 2017 Feb. 2 www.aaatech.com P R O U D L Y S E R V I N G I N D U S T R Y S I N C E 1 9 7 1 AAA Technology & Specialties Co.,
QUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered