WHEEL BALANCERS/TIRE CHANGERS

Transcription

1 SELECTION WHEEL BALANCERS/TIRE CHANGERS

2 WHEEL BALANCERS/TIRE CHANGERS HANDLING TIRE CHANGER EQUIPMENT WHEEL BALANCER WHEEL ALIGNMENT Find out our entire range on clas.com 314

3 HANDLING WHEEL BALANCERS/TIRE CHANGERS OE ELECTRIC & RECHARGEABLE WHEEL LIFTER MAX. 60kg Allows wheels for cars, LCVs and 4x4s to be effortlessly lifted to the height of the vehicle on the ramp. Allows wheels to be moved around the workshop. Low center of gravity increases stability. Compatible with scissor lifts Lifting capacity: 60kg Max height of the hub: 145cm Up/down control integrated in the handle Lifting speed: 0.14m/s Lifting system-motorized screw 4 swiveling wheels for greater maneuvrability Anti-fall security feature Emergency stop button Reels to facilitate rotation to position the wheel on the hub LED indicators: Battery charge level Max. charge capacity exceeded Emergency stop function deployed Engine temperature of the upper screw Batteries 12V 12Ah Charger: 220V-AC Dimensions: L.725xW.800xH.1710mm Weight: 100kg Limits the risks of accident Lifts wheels effortlessly

4 WHEEL BALANCERS/TIRE CHANGERS HANDLING OP MINI IMPACT WRENCH 1/2" D. 678Nm Ergonomic design for ease of use. Light with aluminium motor crankcase 3-position controller at the back Double-hammer technology Handle exhaust Short length of 120mm Maximum torque: 678Nm Rotation speed: 11,000rpm Connection: 1/4" Suggested hose Ø: 10mm Supply pressure: 6bar Consumption: 113l/min Net weight: 1.58kg 90 db 10 m/s 2 OE RECHARGEABLE IMPACT WRENCH 1/2" 600Nm One-handed torquing/loosening with safety position. Change sockets quickly, supported by a safety ring. Rubber sleeve for improved grip. LED illumination for the work area. Maximum torque: 600Nm Speed: rpm Impacts per minute: bpm Battery: Li-ion 18V 4.0Ah Charger with charge-level indicator Length: 235mm Weight: 2.8kg Supplied in a composite case with a charger and 1 battery (SA2605) More impact wrenches p db 17.9 m/s 2 OP /4" IMPACT WRENCH 1898Nm Powerful Light. Composite motor housing 3-position regulator Lock/unlock one-handed toggle Double-hammer technology Swiveling connector Handle exhaust Max. torque: 1898Nm Release torque: 1627Nm Speed: 5,500rpm Length: 215mm Connection: 3/8" Supply pressure: 6.2bar Consumption: 198l/min Net weight: 3.3kg Connector supplied 90 db 10.2 m/s 2 OP " D. IMPACT WRENCH 2441Nm Powerful Horizontal work Anvil 210mm Throttle incorporated into the handle 3-position regulator Double-hammer technology Lateral exhaust Max. torque: 2441Nm Release torque: 2033Nm Speed: 6,000rpm Length: 467mm Connection: 1/2" Supply pressure: 6.2bar Consumption: 282l/min Net weight: 7.5kg Connector supplied 86 db 6.5 m/s 2 316

5 HANDLING WHEEL BALANCERS/TIRE CHANGERS OH WHEEL DOLLY HGV/PUBLIC WORKS/AGRICULTURAL Wheel diameter up to 2200mm Wheel lifting by hydraulic cylinder (1200kg maximum). Height: min.1375mm-max.2175mm Length: 940mm Width: min.1200mm-max.1970mm Ground clearance: 175mm Roller length: 500mm Space between rollers: min.720mm-max.1250mm Rollers: Ø76mm Capacity wheel Ø: min.1000mm-max.2200mm Depth of wheels: 800mm maximum Dolly wheels: 4 big wheels PU Ø145x50mm including 2 swivel wheels with brakes Weight: 125kg 1200 OH WHEEL DOLLY HGV Mounted on 3 swiveling wheels Lifts wheel using hydraulic piston (max. 650kg) 650 OM TIRE LIFTING DOLLY HGV Arm width: 500mm Depth: 350mm 317

6 WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER DM AUTOMATIC TIRE CHANGER 13"-28" 2 SPEED SYSTEM Automatic 2-speed tire changer with integrated tubeless inflator designed for effortless mounting of tires (3rd arm) and double headed steel and aluminium rim. Integrated valve case High capacity 28" Dual head quick fastening connection for alu/steel Integrated valve case Intagrated tubeless inflator (2x6L) Turntable with anti-pinch device and jaw with inflating nozzle Air cleaner and oil lubricator Adjustable bead breaker blade with protection and double acting cylinder Long lasting metallic foot controller 2 speeds without switch 318

7 TIRE CHANGER WHEEL BALANCERS/TIRE CHANGERS Supplied with: DM1100: helper arm for DM1000/DM2000 DM1102: dual head quick fastening connection for alu/steel SA8902: 5 protection covers for steel heads SA8903: 5 protection clips for steel heads SA8904: 1 blade protection cover SA8906: set of 4 alu jaw covers 1 lever with protection for alu rims SA 8906 SA 8902 DM 1100 DM 1102 SA mm 3 à 15" 2000mm 1180mm 13 à 28" 1950mm Roller-supported horizontal arm Max. wheel diameter: 1180mm Tire width: 3"-15" Turntable with anti-pinch device and jaw with inflating nozzle Outside clamp: 13"-24" Inside clamp: 15"-28" 2 speed without switch: Turntable rotation speed 1: 6.5rpm Turntable rotation speed 2: 13rpm Ergonomic foot pedal Adjustable bead breaker blade with protection and double action cylinder jack Tubeless tire inflation is pedal-operated with a precision gauge Working air pressure: 8-10bar Air cleaner and oil lubricator Tubeless inflator safety valve: 3.5bar Tubeless tank safety valve: 10bar Sound level < 70 db Power supply voltage: 400V-50Hz Power: kW Bead breaker arm power: 2500kg Tire changer weight: 598kg Dimensions: 2000x1950x2450mm 319

8 WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER DM AUTOMATIC TIRE CHANGER 10"-24" ONE-SPEED Automatic tire changer designed for an effortless mounting and removal of tires. Suitable for cars, commercial vehicles and 4x4 tires. Roller-supported horizontal arm assisting the translation Eurodainu Protection by clip for faster replacement Turntable with anti-pinch device Air cleaner and oil lubricator Long lasting metallic foot controller Adjustable bead breaker blade with protection and double acting cylinder 320

9 2000mm TIRE CHANGER WHEEL BALANCERS/TIRE CHANGERS Supplied with: OP0049: Eurodainu pressure gauge (complies with 86/217/EEC. Standard UNIEN 12645) SA8902: 5 protection covers SA8903: 5 steel head protection clips SA8904: 1 blade protection cover SA8906: set of 4 alu jaw covers 1 lever with protection for alu rims SA 8906 OP 0049 SA 8902 SA 8904 SA à 12" 1580mm 1180mm 10 à 24" 1900mm Roller-supported horizontal arm Max. wheel diameter: 1180mm Tire width: 3"-12" Turntable with anti-pinch device Outside clamp diameter: 10"-21" Inside clamp diameter: 12"-24" Turntable rotation speed: 6.5rpm Ergonomic foot pedal Adjustable 2 positions bead breaker blade with protection and double acting cylinder jack Working air pressure: 8-10bar Air cleaner and oil lubricator Tubeless inflator safety valve: 3.5bar Sound level < 70 db Power supply voltage: 400V-50Hz Power: 0,85-1.1kW Bead breaker arm power: 2500kg Tire changer weight: 248kg Dimensions: 1900x1580x2000mm 321

10 WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER DM 0500BL 1590 SEMI-AUTOMATIC TIRE CHANGER 10"-21" Semi automatic tire changer designed for effortless mounting and removal of tires. Suitable for cars, commercial vehicles and 4x4 tires. Comes with: SA8902: 5 protection covers 5 clips protection covers Set of 4 jaw covers 1 lever with protection for alu rims Max. tire width: 3"-12" Outside clamp: 10"-18" Inside clamp: 12"-21" Turntable rotation speed: 6.5rpm Ergonomic and intuitive foot pedal Working air pressure: 8-10bar Air purifier and oil lubricator Tubeless inflator safety valve: 3.5bar Power supply voltage : 220V Power: kW Bead breaker arm power : 2500kg Weight: 177kg 3 à 12" 960mm 10 à 21" 322

11 TIRE CHANGER WHEEL BALANCERS/TIRE CHANGERS DM HELPER ARM Accessory ofdm 1000/DM 1500/DM 2000/DM 1050 Pneumatic bead pusher and lifter device with an articulated bead pusher arm. Regulates the rotating arm to adapt as well as possible to each type of rim and tire. Supplementary roller to facilitate the position of the remover tool (Run Flat tire). Control system Articulated and adjustable pressure arm to facilitate bead positioning Upper bead protecting roller for 4x4 and Run flat 3 storage holders 1190mm Support cone for positioning the internal grip Rotating disk made to facilitate the removing of the 2nd bead 550mm 1330mm Ø12mm 100mm 89mm 80mm 140mm 323

12 2000mm WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER DM AUTOMATIC TIRE CHANGER 10"-24" AND MOTORBIKES Automatic tire changer designed for an effortless mounting and removal of tires. Suitable for motorcycle, car, commercial vehicle and 4x4 tires. Supplied with: OP0049: Eurodainu inflator (complies with 86/217/EEC. Standard UNIEN 12645) DM1103: motorbike kit<12" DM1102: dual head quick fastening connection for alu/steel SA8902: 5 protection covers for steel heads SA8903: 5 protection clips for steel heads SA8904: 1 blade protection cover SA8906: set of 4 jaw covers DM1305: motorbike tire remover with handle L.425mm 1 lever with protection for alu rims OP 0049 DM 1102 DM 1103 SA 8902 SA 8903 SA 8906 SA 8904 DM mm 1580mm Roller-supported horizontal arm Max. wheel diameter: 1180mm Max. tire width: 3"-12" Turntable with anti-pinch device Outside rim clamp: 10"-21" Inside rim clamp: 12"-24" Turntable rotation speed: 6.5rpm Ergonomic foot pedal Adjustable 2-position bead breaker blade with protection and double acting cylinder jack Working air pressure: 8-10bar Air cleaner and oil lubricator Tubeless inflator safety valve: 3.5bar Sound level <70 db Supply: 400V-50Hz Power: kW Bead breaker arm power: 2500kg Tire changer weight: 248kg Dimensions: 1900x1580x2000mm 324

13 TIRE CHANGER WHEEL BALANCERS/TIRE CHANGERS DM 0550BL 1790 SEMI-AUTOMATIC TIRE CHANGER 10"-21" AND MOTORCYCLES Semi automatic tire changer designed for effortless mounting and removal of tires. Suitable for motorcycles, cars, commercial vehicles and 4x4 tires. Comes with: DM1103: motorbike kit<12" SA8902: 5 protection covers SA8903: 5 steel head protection clips SA8906: set of 4 jaw covers DM1305: motorcycle tire remover with handle L.425mm 1 lever with protection for alu rims DM 1103 SA 8906 SA 8902 SA 8903 Max. tire width: 3"-12" Outside clamp: 10"-18" Inside clamp: 12"-21" Turntable rotation speed: 6.5rpm Ergonomic and intuitive foot pedal Working air pressure: 8-10bar Air purifier and oil lubricator Tubeless inflator safety valve: 3.5bar Power supply voltage : 220V Power: kW Bead breaker arm power : 2500kg Weight: 177kg 325

14 WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER DM UNIVERSAL DEVICE TABLE REDUCER 5"-23" Accessory of DM 1000/DM 1500/DM 2000/DM 1050/DM 0500BL/DM 0550BL Several positions for the jaws to suit many different wheel rims. Suitable for many wheels: from scooter and motorbike wheels with or without brake disc & belt drive, kart wheels, convex or alloy wheel rims. Jaws stroke: mm Rim diameter : 5"-23" Not compatible with installation tables with staggered jaws. DM MOTORBIKE JAWS KIT<12" Accessory of DM 1000/DM 1500/DM 2000/DM 1050/DM 0500BL/DM 0550BL Suitable for many wheels as scooter and motorbike wheels with or without brake disk & belt drive, kart wheels, convex or alloy wheel rims. Wheel diameter compatibility depending on machines: DM0500/DM0500BL/DM0550: from 6" DM1000/DM1500: from 6" DM2000: from 8" Installation on jaws with a max. width of 45mm. DM ROLL PLATFORM FOR BEAD BREAKER Accessory of DM 2000/DM 1000/DM 1500/DM 0500BL/DM 0550BL/DM 1050 Easy wheel rotation while using the bead breaker. Attach to the ground at the same level as the detaching shovel. Workshop ergonomics increased

15 TIRE CHANGER WHEEL BALANCERS/TIRE CHANGERS OP l TIRE BEAD BLASTER CAR/LCV/HGV 19 OP 0046BL 18 INFLATING GUN 0-12bar OP INFLATOR GUN bar For passenger cars and vans. Complies with directive 86/217/EEC Standard UNI EN Scale of 0 to 12 bar Flexible length: 50mm Graduations of 0.7 to 12bar CO CLEANSING WORKSHOP WIPES Double-sided: Smooth/rough Gentle for the skin Specially designed to clean the hands without rinsing, wiping or residues; the wipes also allow you to clean mechanical parts, tools, workbenches, bodywork, alloy wheels, instrument panels..etc Double-sided: Smooth-rough Plant-based solvents with high detergent qualities Paraben-free Packed in a bucket with carry grip handle DM PRESS ASSIST DEVICE FOR LOW PROFILE OR RUN FLAT TIRES Accessory of DM 1000/DM 1500/DM 2000 DM HGV BEAD KEEPER FOR ALUMINIUM WHEEL RIM Easy positioning of the second tire bead. Allows the tire bead to be blocked in the wheel rim during fitting. The tool is made from coated steel and doesn't damage the wheel rim or the tire. 327

16 WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER OP TIRE RELEASER Can be used on the vehicle Saves time Air regulator Handle exhaust Agricultural use Travel: 80mm Jaw opening: 68mm Length: 380mm Connection: 1/4" Supply pressure: 6.2bar Consumption: 113l/min Net weight: 4.6kg Connector supplied 91 db 8.9 m/s 2 DM HYDROPNEUMATIC BEAD BREAKER + PUMP/HOSE/CONNECTOR Bead breaker Adapts to 17.5" to 60" wheels Max. opening.: 130mm Air inlet, female threading 3/8" Pump specifications: 700bar Aluminium body Load limitor Silent exhaust Dimensions: L.255xW.135xH.185mm Contents: DM0204: HGV/agricultural vehicles hydropneumatic bead breaker OH0014: hydraulic air pump 10T 1/4" (700bar) SA0802: hose 1/4" SA0803: hydraulic female adaptor SA4215: hydraulic adaptor 1/4"-3/8" 328

17 TIRE CHANGER WHEEL BALANCERS/TIRE CHANGERS OM TIRE REMOVER SHEATHED L.495mm Spare part of DM 2000/DM 1000/DM 1500/DM 0500BL Plastic coating on the rear side: anti-scratch! SA 0355 PROTECTIVE SHEATH Spare part of OM Allows to tires to be removed without causing damage to rims. The removable plastic base (6mm thick) is held by 4 screws on the steel part. OM TIRE REMOVER L.650mm Accessory of DM 2000/DM 1000/DM 1500/DM 0500BL DM LEVER L.530mm FOR SMALL TUBELESS TRUCK TIRES DM MOTORBIKE TIRE REMOVER WITH HANDLE L.425mm Accessory of DM 0550BL/DM

18 WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER OM IN-1 REVERSIBLE VALVE/VALVE CORE REMOVAL TOOL OM SILENT VALVE CORE REMOVER Noise levels limited to 85dB Easy-grip resin handle Valve core removal tool Valve puller Considerably reduces the risk of hearing damage Clips onto the valve: one-handed valve core removal Protects the operator against projections from the valve core or from particles present in the tire Restraint system DM VALVE CUTTING PLIERS Allows quick, neat and precise cuts to be made to the valves, thus facilitating their extraction.45 head perfectly matching the tilt of the valve for improved user comfort. Max. opening: 30mm Width of the cut: 18mm Length: 230mm OM TPMS TOOL SET To ensure correct assembly/removal of the tire pressure monitoring sensors, special tools are today required. Torque wrenches see p. 88 Contents: 2pcs 1/4" D. adjustable torque drivers: 0.4-2Nm, 2-10Nm 2pces deep sockets 11 and 12mm 1pc 1/4" D. T-handle 1pc 1/4" D. 100mm extension bar 2pcs 1/4" D. Torx bit socket : T10, T20 1pc 1/4" D. valve core tool 1pc composite TPMS grommet tool L.190mm Sockets for alu rims p

19 TIRE CHANGER WHEEL BALANCERS/TIRE CHANGERS DM DUAL HEAD QUICK FASTENING CONNECTION FOR ALU/STEEL Accessory of DM 1000/DM 1500/DM 2000/DM 1050/DM 0500BL/DM 0550BL Allows plastic and steel heads to be changed thanks to the threaded-ring retaining system without tools. Contents: Female machine adaptor Male adaptor for original head SA1183: plastic head SA STEEL HEAD REMOVAL ASSEMBLY Spare part of DM 1000/DM 1500/DM 2000/DM 1050 SA 1183 PLASTIC HEAD Spare part of DM 1102/SA SA STEEL HEAD FOR AUTOMATIC TIRE CHANGER SICAM/M&B/BEISSBARTH Ø28mm Ø29mm SA STEEL HEAD FOR AUTOMATIC TIRE CHANGER GS/SNAPON/HOFMANN SA STEEL HEAD FOR AUTOMATIC TIRE CHANGER GIULIANO/CEMB/CORMACH SA PROTECTION PADS 9 SA PROTECTIVE CLIPS 12 Ø32mm (conical) Ø28mm Spare part of SA 8901/DM 1000/ DM 1500/DM 2000/DM 1050 Spare part of SA 8901/SA 8907/ SA 8908/SA 8909/DM 1000/ DM 1500/DM 2000/DM 1050 DM PLASTIC EDGE PROTECTOR FOR ALUMINIUM RIMS 331

20 WHEEL BALANCERS/TIRE CHANGERS TIRE CHANGER DM TRANSLUCENT TIRE MOUNTING CREAM 5kg DM TRANSLUCENT TIRE MOUNTING CREAM 1kg Ensures fast & precise centering of the tire on the rim thanks to its superior lubricating power Easy and precise application with brush Keeps its lubricating power even if the pot stays open Fast drying avoiding any rotation on rim Invisible, leaves no traces on the tire or the rim Limits corrosion formation and tire sticking on the rim Does not freeze, does not dry in the pot Following the 67/548/CEE and 1999/45/CE directives, this translucent mounting cream is not classified as a dangerous product and does not contain substances presenting danger. Non-irritating (chemically neutral) Hardly flammable Does not damage rubber Does not damage paints Suitable for any tire type SA 0115 PLASTIC CHISEL Spare part of OC CO TIRE MOUNTING GREASE SPRAY 400ml In an aerosol: does not dry once it is opened 1 spray = ~100 tires Grease which can be pulverized allowing easy dosing and precise application on the tire. Ensures that the tire can be rapidly and precisely centered on the wheel rim thanks to its lubricating power Quick-drying to avoid rotation on the wheel riminvisible and does not leave traces on the tire or the wheel rim Limits corrosion and the tire sticking onto the wheel rim 400 DM Ø30mm ELBOW BRUSH FOR MOUNTING CREAM Increased precision Allows a more precise application while using the bead breaker. Length: 270mm Tough plant-based bristle Wooden handle DM Ø32mm STRAIGHT BRUSH FOR TIRE MOUNTING CREAM Ultra resistant bristle Length: 285mm Natural bristle, medium hardness Reinforced crimp ring Wooden handle 332

21 EQUIPMENT WHEEL BALANCERS/TIRE CHANGERS EG AUTOMATIC MULTIPROGRAMME WHEELS WASHER WITH LCD SCREEN Meticulous work A choice of 7 programs: Detergent Detergent + blow-drying away excess water (+20s) Detergent + polish Detergent + polish + blow-drying away excess water (+20s) Polish Polish + blow-drying away excess water (+20s) 2 cycles: short: 80s and long: 120s Daily machine wash via push button Supplied with: EG1001: 6l container of detergent (300 uses) EG1002: 6l container of polish (300 uses) Pump maintenance oil (1 dose) Flexible evacuation pipe 5m Optional (not supplied): EG1003: door support structure Covers wheels up to a diameter of 800mm and a width of 360mm Max. wheel weight: 60kg Not compatible with domed wheel rims Security door open Ramp for effortless wheel loading 2 pumps (can be adjusted from 16 to 20ml per use) for detergent and polish 2 detergent distribution nozzles 2 polish distribution nozzles 2 110bar high pressure washing jets 5 blow-dry nozzles to remove excess water LCD screen with program selector and progress bar for the washing cycle Pump pressure: 6/8bar Machine power supply: 380V Cold water supply via tap Consumption: approximately 10l/cycle Empty weight: 245kg Dimensions: 1025x930x1335mm Trilingual software: French, English Italian Suggested amortization over 60 months* or approximately 215/month. If 2.50/wheel is charged, the machine will be commercially viable at a rate of approximately 86 wheels/month. * Without detergent. EG AUTOMATIC WHEEL WASHER 1 detergent program 2 cycles: short 80s and long 120s Daily machine wash via push button Covers wheels up to a diameter of 800mm and a width of 360mm Max. wheel weight: 60kg Not compatible with domed wheel rims Security door open 1 detergent pump (can be adjusted from 16 to 20ml per use) 3 cleaning product distribution nozzles 2 110bar high pressure washing jets Compressed air outlet on the exterior to connect drying blowgun Pump pressure: 6/8bar Machine power supply: 380V Cold water supply via tap Consumption: approximately 10l/cycle Empty weight: 245kg Dimensions: 1025x930x1335mm Trilingual software: French, English Italian Suggested amortization over 60 months* or approximately 175/month. If 2.50/wheel is charged, the machine will be commercially viable at a rate of approximately 70 wheels/month. * Without detergent. Supplied with: EG0751: 5l container of detergent (250 uses) Pump maintenance oil (1 dose) Flexible evacuation pipe 5m Optional (not supplied): EG1003: door support structure 333

22 WHEEL BALANCERS/TIRE CHANGERS WHEEL BALANCER EQ AUTOMATIC WHEEL BALANCER 3D LCD SCREEN Automatic wheel balancer with intuitive video screen and automatic measurement for the 3 parameters for quick, easy and precise balancing for cars, commercial vehicles and 4x4. Compartmentalized storage tray for cones and weights 250mm To facilitate the assembly of bead rims with big backwaedation 210mm Long threaded pin for easier assembly of all types of accessories 334

23 WHEEL BALANCER WHEEL BALANCERS/TIRE CHANGERS Supplied with: EQ6521BL: 4 counterweights from 42 to 137mm Ø40mm 12mm hex wrench SA8305: rim width caliper SA8905: calibration weight 50g OC8034: tire pliers EQ6404BL: fast nut Ø40x4mm with bowl/joint/compression ring EQ 6521BL SA 8905 EQ 6404BL SA 8305 OC 8034 Functions: European software Automatic cycle Multipurpose keys Static and dynamic program (dual plane) in a single measuring run 9 modes: 7 Alu (hidden weight) +Optimization+Motorcycle balancing Automatic reset/machine calibration: 50g weights Auto diagnostic with error codes Multiple operator function Simultaneous display of weights and weight positions Automatic stop on weight position with LED light inside the rim Electromagnetic brake which can be locked if required Measuring precision: ±1g Display precision: 1g/5g 1100mm 70kg 1,5 à 20" max. 28" Power supply voltage: 220V-50Hz Motor power: 90W Wheel balancer weight: 163kg Dimensions (wheel guard opened): 1455x980x1450mm Sound level < 69dB Colour screen: 17" high resolution LCD with three-dimensional graphics (automatic standby mode if the machine is not in use after 5min) Max. wheel diameter: 1100mm Max. wheel weight: 70kg Rim diameter: 28" Rim width: 1.5"-20" Automatic measurement of 3 parameters: protrusion-diameter-width Automatic wheel guard with automatic start Measurement cycle duration: 7s Rotating speed: 140rpm Shaft: L.210mm-Ø40mmx4mm Compartmentalized storage tray for cones and weights 3 storage Weight positioning clip 335

24 WHEEL BALANCERS/TIRE CHANGERS WHEEL BALANCER EQ AUTOMATIC WHEEL BALANCER 3D DIGITAL DISPLAY Motorized wheel balancer with a large digital display, measures 3 parameters manually for precise, simple and quick wheel balancing for cars, LCVs and 4x4s. 250mm 210mm Adjustable bead breaker blade with protection and double acting cylinder Long threaded pin for easier assembly of all types of accessories 336

25 WHEEL BALANCER WHEEL BALANCERS/TIRE CHANGERS Supplied with: EQ6521BL: 4 counterweights from 42 to 137mm Ø40mm 12mm hex wrench SA8305: rim width caliper SA8905: calibration weight 50g OC8034: tire pliers EQ6404BL: fast nut Ø40x4mm with bowl/joint/compression ring EQ 6521BL SA 8305 SA 8905 OC 8034 EQ 6404BL Functions: European software Automatic cycle Multipurpose keys Static and dynamic program (dual plane) in a single measuring run 9 modes: 7 Alu (hidden weight) +Optimization+Motorcycle balancing Automatic reset/machine calibration: 50g weights Auto diagnostic with error codes Multiple operator functions Simultaneous display of weights and weight positions Automatic stop on weight position with LED lighting inside the rim Electromagnetic brake which can be locked if required Measuring precision: ±1g Display precision: 1g/5g 1100mm 70kg 1,5 à 20" max. 28" Power supply voltage: 220V-50Hz Motor power: 90W Wheel balancer weight: 149kg Dimensions (wheel guard opened): 1550x1160x1490mm Sound level < 69dB Digital display (automatic standby mode if the machine is not being used after 5min) Max. wheel diameter: 1100mm Max. wheel weight: 70kg Max. rim diameter: 28" Rim width: " Automatically measures 3 parameters: protrusion, diameter, width Automatic wheel casing with automatic ignition Duration of measurement cycle: 7s Rotating speed: 140rpm Shaft: L.210mm-Ø40mmx4mm Ergonomic and functional weight holder top with large trays for different types of counterweights and cones. 4 storage media Clip to position weights 337

26 WHEEL BALANCERS/TIRE CHANGERS WHEEL BALANCER EQ AUTOMATIC WHEEL BALANCER WITH DIGITAL DISPLAY Motorized wheel balancer equipped with a large digital display and manual measurement of 3 parameters for precise, simple and rapid work on wheels for LV, LCVs and 4x4s. 250mm Adjustable bead breaker blade with protection and double acting cylinder 210mm Long threaded pin for easier assembly of all types of accessories 338

27 WHEEL BALANCER WHEEL BALANCERS/TIRE CHANGERS Supplied with: EQ6521BL: 4 counterweights from 42 to 137mm Ø40mm 12mm hex wrench SA8305: rim width caliper SA8905: calibration weight 50g OC8034: tire pliers EQ6404BL: fast nut Ø40x4mm with bowl/joint/compression ring EQ 6521BL SA 8305 SA 8905 OC 8034 EQ 6404BL Functions: European software Automatic cycle Multipurpose keys Static and dynamic program (dual plane) in a single measuring run 9 modes: 7 Alu (hidden weight)+optimization+motocycle balancing Automatic reset/machine calibration: 50g weights Auto diagnostic with error codes Multiple operator function Simultaneous display of weights and weight positions Measuring precision: ±1g Display precision: 1g/5g 1100mm 1,5 à 20" max. 28" Power supply voltage: 220V-50Hz Motor power: 90W Wheel balancer weight: 149kg Dimensions (wheel guard opened): 1550x1160x1490mm Sound level < 69dB Digital display (automatic standby mode if the machine is not being in use after 5min) Max. wheel diameter: 1100mm Max. wheel weight: 70kg Rim diameter: 1-28" Rim width: " Wheel 3 parameters manual measurement Automatic wheel guard One balance time: 7s Rotating speed: 140rpm Shaft: L.210mm-Ø40mmx4mm Ergonomic and functional weight holder top with large trays for different types of counterweights and tools. 4 storage media Support of positioning weight 70kg 339

28 WHEEL BALANCERS/TIRE CHANGERS WHEEL BALANCER EQ MOTORIZED WHEEL BALANCER + DIGITAL DISPLAY + MOTORBIKE BALANCING KIT Motorized wheel balancer with a large digital display, measures 3 parameters manually for precise, simple and quick wheel balancing for motorbikes, cars, LCVs and 4x4s. 340

29 WHEEL BALANCER WHEEL BALANCERS/TIRE CHANGERS Supplied with: EQ1634: motorbike kit+shaft Ø14mm+cones Ø16-34mm+ rings 16mm 4 cones from 40 to 137mm: SA8408: centering cone Ø40-62mm Ø40mm SA8409: centering cone Ø54-81mm Ø40mm SA8410: centering cone Ø70-98mm Ø40mm S7849: centering cone 4x4 Ø95-137mm Ø40mm SA8305: wheel rim width caliper SA8905: 50g calibration weight OC8034: multifunctional tire-pliers EQ8404: fast nut Ø40x4mm with bowl/joint/compression ring EQ 1634 SA 8408 SA 8409 SA 8410 SA 7849 OC 8034 SA 8305 SA 8905 EQ 8404 Functions: European software Automatic cycle Multifunctional keys Static and dynamic program (dual plane) in a single measuring run 9 programs: 7 Alu (hidden weight)+optimization+static Motorcycle Automatic reset/machine calibration: 50g weights Auto diagnostics: default code Multi-operator function Simultaneous display of weights and weight positions Measuring precision: ±1g Display precision: 1g/5g Optional (not supplied): EQ9400: universal centering plate with 5 rings EQ6400: Universal centering plate with 3 rings EQ8091: LCV centering cone Ø mm with spacer disk Ø40mm Power supply: 220V-50Hz Power: 90W Weight of the balancer: 149kg Dimensions with open casing: 1550x1160x1490mm Sound level<69db Digital display (standby 5mins) Maximum wheel diameter: 1100mm Maximum wheel weight: 70kg Maximum wheel rim diameter: 28 inches Wheel rim width: from 1.5 to 20 inches Manual measurement of the 3 parameters: protrusion-diameter-width Security casing with automatic starter Length of the measurement cycle: 7s Rotation speed: 140rpm Shaft: L.210mm-Ø40mmx4mm Compartmentalized platform for cones and weights 4 storage compartments Pliers for positioning weights 341

30 WHEEL BALANCERS/TIRE CHANGERS WHEEL BALANCER EQ 6404BL 139 QUICK NUT Ø40x4mm WITH BOWL/SEAL/RING Contents: Quick nut Ø40x4mm+compression ring Bowl Seal SA QUICK NUT INTENSIVE USE Ø40x4mm Spare part of EQ 1000/EQ 2000/EQ 3000/EQ 1050/EQ 8404 SA 6474BL 35 BOWL/SEAL/RING KIT FOR BALANCERS Spare part of EQ 1000/EQ 1050/EQ 2000/EQ 3000 Compatible with Haweka Ø EQ QUICK NUT INTENSIVE USE Ø36x3mm WITH BOWL/SEAL/RING Contents: SA8363: quick nut Ø36x3mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compression ring EQ QUICK NUT INTENSIVE USE Ø40x4mm WITH BOWL/SEAL/RING Contents: SA8404: quick nut Ø40x4mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compression ring EQ QUICK NUT INTENSIVE USE Ø38x3mm WITH BOWL/SEAL/RING Contents: SA8383: quick nut Ø38x3mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compression ring EQ QUICK NUT INTENSIVE USE Ø40x3mm WITH BOWL/SEAL/RING Contents: SA8403: quick nut Ø40x3mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compression ring 342

31 WHEEL BALANCER WHEEL BALANCERS/TIRE CHANGERS EQ 6400BL 350 CYLINDRICAL UNIVERSAL CENTERING PLATE Ø40mm Accessory of EQ 1000/EQ 1050/EQ 2000/EQ 3000 Only available for CLAS wheel balancers Supplied with: Ring Ø58mm Ring Ø60mm Ring Ø65mm SA6400: Universal gauge measuring wheel interaxis mm EQ UNIVERSAL CYLINDRICAL QUICK FLANGE Ø38mm WITH 5 CENTERING RINGS For intensive use EQ UNIVERSAL CYLINDRICAL QUICK FLANGE Ø40mm WITH 5 CENTERING RINGS For intensive use Contents: EQ8380: universal centering flange Ø38mm SA8355: ring Ø55mm SA8357: ring Ø57mm SA8358: ring Ø58mm SA8360: ring Ø60mm SA8365: ring Ø65mm SA6400: Universal gauge measuring wheel interaxis mm Contents: EQ8400: universal cylindric quick flange Ø40mm for EQ1000/EQ2000/EQ3000 SA8455: ring Ø55mm SA8457: ring Ø57mm SA8458: ring Ø58mm SA8460: ring Ø60mm SA8465: ring Ø65mm SA6400: Universal gauge measuring wheel interaxis mm EQ UNIVERSAL CYLINDRICAL QUICK FLANGE Ø36mm WITH 5 CENTERING RINGS For intensive use Contents: EQ8360: universal cylindric quick flange Ø36mm SA8355: ring Ø55mm SA8357: ring Ø57mm SA8358: ring Ø58mm SA8360: ring Ø60mm SA8365: ring Ø65mm SA6400: Universal gauge measuring wheel interaxis mm EQ UNIVERSAL CYLINDRICAL QUICK FLANGE Ø28mm WITH 5 CENTERING RINGS For intensive use Contents: EQ8280: universal cylindric quick flange Ø28mm SA8355: ring Ø55mm SA8357: ring Ø57mm SA8358: ring Ø58mm SA8360: ring Ø60mm SA8365: ring Ø65mm SA6400: Universal gauge measuring wheel interaxis mm SA CENTERING RINGS 194 Accessory of EQ 8280/EQ 8380/EQ 8360/EQ 8440 SA CENTERING RINGS Accessory of EQ SA 8355: ring Ø55mm SA 8357: ring Ø57mm SA 8358: ring Ø58mm SA 8360: ring Ø60mm SA 8365: ring Ø65mm SA 8455: ring Ø55mm SA 8457: ring Ø57mm SA 8458: ring Ø58mm SA 8460: ring Ø60mm SA 8465: ring Ø65mm 343

32 WHEEL BALANCERS/TIRE CHANGERS WHEEL BALANCER EQ 6521BL 109 SET OF 4 CENTERING CONES Ø42-137mm Ø40mm Spare part of EQ 1000/EQ 1050/EQ 2000/EQ 3000 EQ SET OF 3 CONES INTENSIVE USE Ø40-98mm Ø40mm Contents: SA8408: centering cone Ø40-62mm Ø40mm SA8409: centering cone Ø54-81mm Ø40mm SA8410: centering cone Ø70-98mm Ø40mm SA CENTERING CONE INTENSIVE USE Ø40-62mm Ø36mm SA CENTERING CONE INTENSIVE USE Ø40-62mm Ø38mm SA CENTERING CONE INTENSIVE USE Ø40-62mm Ø40mm Spare part of EQ 1000/EQ 2000/EQ 3000/EQ 8403/EQ 1050 SA CENTERING CONE INTENSIVE USE Ø54-81mm Ø36mm SA CENTERING CONE INTENSIVE USE Ø54-81mm Ø38mm SA CENTERING CONE INTENSIVE USE Ø54-81mm Ø40mm Spare part of EQ 1000/EQ 2000/EQ 3000/EQ 8403/EQ 1050 SA CENTERING CONE INTENSIVE USE Ø70-98mm Ø36mm SA CENTERING CONE INTENSIVE USE Ø70-98mm Ø38mm SA CENTERING CONE INTENSIVE USE Ø70-98mm Ø40mm Spare part of EQ 1000/EQ 2000/EQ 3000/EQ 8403/EQ 1050 EQ LCV CENTERING CONE Ø mm+SPACER DISK Ø40mm KIT Accessory of EQ 1000/EQ 2000/EQ 1050 SA CENTERING CONE 4x4 INTENSIVE USE Ø95-137mm Ø36mm Contents: SA7850: LCV centering cone for intensive use Ø mm SA7861: spacer disk Ø40mm SA CENTERING CONE 4x4 INTENSIVE USE Ø95-137mm Ø38mm SA CENTERING CONE 4x4 INTENSIVE USE Ø95-137mm Ø40mm Accessory of EQ 1000/EQ 2000/EQ 3000/EQ

33 WHEEL BALANCER WHEEL BALANCERS/TIRE CHANGERS OC MULTIFUNCTIONAL TYRE PLIERS SA SET OF 5 FIX CONES CONICAL WITH ROUND HEAD Ø10x1.5mm SA PLASTIC CHISEL Spare part of OC 0112 SA 8305 RIM WIDTH CALIPER 40 SA LONG FIX CONES FOR ALU RIMS Ø10x1.5mm Spare part of EQ 9281 SA SHORT FIX CONES BICONICAL Ø10x1.5mm EQ MOTORBIKE KIT+Ø14mm SHAFT+CONES Ø16-34mm+RINGS 16mm Accessory of EQ 1000/EQ 2000/EQ 3000 SA DEPORT EXTENSION FOR MOTO KIT Spare part of EQ 1634 SA CALIBRATION WEIGHT 50g FOR MOTORBIKE KIT Spare part of EQ 1634/EQ 1050 Supplied with calibration weight 50g (SA8950) 345

34 WHEEL BALANCERS/TIRE CHANGERS WHEEL BALANCER PR WHEEL BALANCER SHAFT DIAMETER AND THREAD CONTROL PLATE Pas de 3,5 mm ø 28 SAV : ø 30 ø 35 Pas de 4 mm ø 40 ø 38 ø 36 PR 8010 Pas de 3 mm Pas 8.46 P2 TABLE OF CORRESPONDANCES WHEEL BALANCERS AND ACCESSORIES QUICK NUT DIAMETER THREADING ASSEMBLY UNIVERSAL QUICK FLANGE MODEL BRANDS EQ 8404 EQ x4 Cylindrical EQ 9400 EQ 6400 EQ 1000/EQ 2000/EQ 3000 CLAS Equipements EQ ,5x3,5 Cylindrical EQ 9280 B 945/B 995 Balco/John Bean EQ x3 Cylindrical EQ 9400 B 940 Balco/John Bean EQ 8404 EQ x4 Cylindrical EQ 9400 B 9400/B 9450/B 9455/B 920/B 9460/B 9100 Balco/John Bean EQ x3 Conic EQ 9440 Complete range Beissbarth EQ x3 Conic EQ 9440 Complete range Bosch EQ 8404 EQ x4 Cylindrical EQ 9400 EQ 6400 Original Shaft Butler/Space EQ x3 Cylindrical EQ 9400 Haweka Shaft Butler/Space EQ 8404 EQ x4 Cylindrical EQ 9400 EQ 6400 Version complete hub (C32) Cemb News > 2005 EQ x3 Cylindrical EQ 9360 Shaft version Cemb Old < 2005 EQ x3 Cylindrical With spacer of backwardation Corghi News > 2006 EQ x3 Cylindrical With spacer of backwardation Corghi Old < 2006 EQ x3 Cylindrical EQ 9360 Complete range Dunlop EQ x3 Conic EQ 9440 Complete range Facom EQ x3 Cylindrical EQ 9380 Complete range Faip/Fasep EQ x3 Cylindrical EQ 9400 Complete range Fmc EQ x3 Conic EQ 9440 Complete range Fog EQ x3 Cylindrical EQ 9360 Complet range except S 448 GS/Giuliano EQ 8404 EQ 6404 EQ 8404 EQ x4 Cylindrical S 448 Giuliano 40x4 Conic EQ 9440 Range manual tightening Hofmann EQ x3 Cylindrical EQ st and 3eme generation Launch EQ x3 Cylindical EQ eme and last generation Launch EQ ,5x3 Cylindrical EQ 9280 Original range Mondolfo Ferro EQ x3 Cylindrical EQ 9400 Haweka range Mondolfo Ferro EQ x3 Cylindrical EQ /1626/1138/1639/1690/ 1627/1636/3607 Muller (Actia) EQ x3 Cylindrical EQ 9400 Nussbaum EQ 8404 EQ x4 Cylindrical EQ 9400 Original Shaft Rava News > 2005 EQ x3 Cylindrical EQ 9400 Haweka Shaft Rava News > 2005 EQ x3 Cylindrical EQ 9360 Complete range Rava Old < 2005 EQ x3 Conic EQ 9440 Complete range Schenk EQ x3 Conic EQ 9440 Complete range Sicam EQ x3 Cylindrical EQ 9380 Complete range Sice EQ x3 Cylindrical EQ 9400 Complete range Sun EQ x3 Cylindrical EQ 9380 Teco News EQ x3 Cylindrical EQ 9360 Teco Old EQ 8404 EQ x4 Cylindrical EQ 9400 Tip Top EQ x3 Conic EQ 9440 Complete range Werther 346

35 WHEEL ALIGNMENT WHEEL BALANCERS/TIRE CHANGERS EG PAIR OF TURNTABLES 380x380mm H.50mm Max load: 600kg/table OM FRONT END ALIGNMENT STEERING WHEEL LEVEL This level is useful to align steering wheels for the vehicles with mechanical or power steering. Easy to use, it is automatically kept centered and stable thanks to fixing springs. OM FOOT PEDAL OPERATED STEERING WHEEL LOCK 347

36 WHEEL BALANCERS/TIRE CHANGERS WHEEL ALIGNMENT OM DIGITAL CAMBER ANGLE GAUGE When using the contact strips: 1. Fit the strips to the front edge of the gauge, adjusting them to the wheel rim to be measured. 2. Check the floor level with the strips fitted. If the floor is not reasonably smooth, place a piece of wood across the vehicle and measure on the wood. 3. Carry out the camber measurement as described above. Accurate to 0.1 (6 minutes) at 90 Easy to use with large, clear digital readout Measure directly off the tire sidewall or the wheel rims (using the contact strips) Suitable for all wheel rims up to 20 inches Easily calibrated with alternate zero facility (when not working on a level surface) Smarter return on your investment Operating the gauge : 1. Always use the gauge with the handle pointing upwards. 2. To measure camber, check that the vehicle is on a level surface with the front wheels pointing straight ahead. Also check that tire pressures are correct. 3. Check the floor level across the front of the vehicle, with the gauge facing the same direction as the vehicle. If the floor is not level, press the "C" button. 4. The device is now calibrated. 5. You can now take a direct reading of the camber angle of the left hand front wheel. 6. Check the floor level again across the front of the vehicle with the gauge facing the rear of the vehicle. 7. Press the "C" button again to obtain an alternative zero reading. 8. You can now take a direct camber reading of the right hand front wheel. Note : When using the "alternative zero" function, the gauge must face the same direction as when measuring the camber angle. OM VW ALIGNMENT TOOLS This tool set allows easy and accurate adjustment of the camber on VW, AUDI, SEAT, SKODA, CHRYSLER vehicles... when passing the front-wheel axle unit. Contents: Adjusting tool from 130mm to 180mm Adjusting tool from 140mm to 190mm Adjusting tool from 170mm to 220mm 348

37 WHEEL ALIGNMENT WHEEL BALANCERS/TIRE CHANGERS OM LASER WHEEL ALIGNMENT GAUGE Faster and more efficient working Precise wheel alignment Better return on investment Laser for front tracking with retrogression and other calibration functions, for both sides of the vehicle. Laser indicator for rear wheels. For both sides of the vehicle. Steering wheel stop. Brake pedal applicator. Sprung nylon contact pins, gentle on alloy wheels and simple to adjust. Easy levelling with precision bubbles. Simplified leveling thank to ultra-precise bubbles. Low working height makes light work of low spoilers, lowered suspension and wheel arches. This system is adapted to all wheels of a diameter of between 10 and 24 inches. All scales are precision executed with clear markings. Laser lines are very clear to accelerate reading. Rear wheel scales can easily be read from the front of the vehicle. Cable free operation. Two sets of 4 rechargeable AA batteries for each head ensuring minimal down time. Gravity force attaches each gauge to the wheel, allowing fast workflow without loss of accuracy. All scales are precision executed with clear markings. Rear wheel scales can easily be read from the front of the vehicle. Optional digital caster/camber gauge (OM 2820) Front wheel scale plate, showing set back. Characteristics: Fits all wheel sizes from 10" to 24" Measurement range: ± 2 degrees Batteries : 6xAA batteries, battery life 6-12 months 3 alignment lasers: 2 for aligning Front Rear wheels and 1 for tracking Toggle switch: class 2, eye-safe, 650nm, 1.0mW Option:OM

38 WHEEL BALANCERS/TIRE CHANGERS WHEEL ALIGNMENT OM LASER ANGLE ALIGNMENT GAUGE This system has been produced to address the demands of fast track workshops requiring reliable and accurate measurement. Cars, trucks and buses, and particularly new vehicles with low ground clearance or extended front ends. Operated by two long-life AA batteries, typically changed every 6-12 months. This tool has become an essential tool for all vehicle workshops, tire fitting bays, race and rally car preparation areas, technical schools and training establishments. Unlike most other competitor brands, the OM 2830 has been designed to be used on an elevating bridge as well as on the ground. Quick and easy to use, it is simple in operation and can be calibrated on site without any special equipment. Large mirror and close to the ground for maximum visibility beneath vehicles with a low ground clearance. Large, adjustable laser target plate positioned close to the ground for maximum visibility beneath vehicles with a low ground clearance. Easy to read scales with quick and foolproof conversion from degrees to millimeters or inches. All types of vehicles can be accommodated with short or large overhangs. Designed and engineered for accuracy and durability, reads the combined toe angle on almost any vehicle. With a minimal footprint, it has been designed to fit onto ramps and lifts as well as the ground. Accurate and robust Precision engineered For use on car, truck and bus Designed for use on vehicle lifts and ground Low beam height Easy to calibrate Technical specifications: Compatible with rim diameter 8 to 24 inches Measurement range ± 2 degrees < 30mm Batteries : 2xAA 1.5V (battery life between 6 and 12 depending on frequency of use) Pressure release switch (Up position : stop) Toggle switch: class 2, eye-safe, 650Nm, 1.0mW 350