Rotary Cutter RC4610 & RCM P Parts Manual. Copyright 2018 Printed 07/11/18

Transcription

1 Rotary Cutter RC4610 & RCM P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2018 Printed 07/11/18 Cover photo may show optional equipment not supplied with standard unit.

2 Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Decks & Hitches...6 Blade Carrier...6 Deck Center Components...8 Deck Center Drive Components...10 Deck Wing Components...12 Deck Wing Drive Components...14 Hitch A-Frame...16 Hitch Ball Coupler...18 Hitch Bar Tite...20 Hitch LP Performance...22 Hitch Pintel...24 Hitch Standard Pivoting Clevis...26 Leveling Rod...28 Off Center Lights 3 Inch (LED)...30 Splitter Box Sliding Cover...32 Weight Box...34 Section 3: Axles...36 Axle Center...36 Axle Wing...38 Hub Assembly ( K)...40 Rotary Cutter Tire Options...42 Section 4: Guards...44 Chain Guards Front Double...44 Chain Guards Front Single...46 Chain Guards Rear Double...48 Chain Guards Rear Single...50 Section 5: Drivelines...52 Driveline Center ( C) Comer...52 Driveline CV RPM ( C) Weasler...54 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...56 Driveline CV RPM ( C)...58 Driveline CV 540 RPM ( C) Weasler...60 Driveline Wing ( C) Comer...62 Driveline Wing ( C) Comer...64 Section 6: Gearboxes...66 Gearbox ( C)...66 Gearbox 1000 RPM ( C)...68 Gearbox 1000 RPM ( C)...70 Gearbox 540 RPM ( C)...72 Gearbox Divider 1000 RPM ( C) Comer...74 Gearbox Divider 1000 RPM ( C) ITG...76 Gearbox Divider 540 RPM ( C) Comer...78 Gearbox Divider 540 RPM ( C) ITG...80 Section 7: Hydraulics...82 Hydraulic Components...82 Hydraulic Cylinder ( C) Cross...84 Hydraulic Cylinder ( C) Lion...86 Hydraulic Cylinder ( C) Midway...88 Hydraulic Cylinder ( C) Midway...90 Hydraulic Cylinder ( C) Red Lion...92 Section 8: Options & Accessories...94 Manual Winch Wing Deck...94 Off Center Lights 3 Inch (LED) Retro-Fit ( A)...96 Section 9: Decals...98 Decals...98 Touch-up Paints Copyright All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 RC4610 & RCM4610 Rotary Cutter P 07/11/18

3 Alphabetized Table of Contents A B C D G H L Axle Center...36 Axle Wing...38 Blade Carrier...6 Chain Guards Front Double...44 Chain Guards Front Single...46 Chain Guards Rear Double...48 Chain Guards Rear Single...50 Decals...98 Deck Center Components...8 Deck Center Drive Components...10 Deck Wing Components...12 Deck Wing Drive Components...14 Driveline Center ( C) Comer...52 Driveline CV RPM ( C) Weasler...54 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...56 Driveline CV RPM ( C)...58 Driveline CV 540 RPM ( C) Weasler...60 Driveline Wing ( C) Comer...62 Driveline Wing ( C) Comer...64 Gearbox ( C)...66 Gearbox 1000 RPM ( C)...68 Gearbox 1000 RPM ( C)...70 Gearbox 540 RPM ( C)...72 Gearbox Divider 1000 RPM ( C) Comer...74 Gearbox Divider 1000 RPM ( C) ITG...76 Gearbox Divider 540 RPM ( C) Comer...78 Gearbox Divider 540 RPM ( C) ITG...80 Hitch A-Frame...16 Hitch Ball Coupler...18 Hitch Bar Tite...20 Hitch LP Performance...22 Hitch Pintel...24 Hitch Standard Pivoting Clevis...26 Hub Assembly ( K)...40 Hydraulic Components...82 Hydraulic Cylinder ( C) Cross...84 Hydraulic Cylinder ( C) Lion...86 Hydraulic Cylinder ( C) Midway...88 Hydraulic Cylinder ( C) Midway...90 Hydraulic Cylinder ( C) Red Lion...92 Touch-up Paints Leveling Rod...28 M O R S W Manual Winch Wing Deck...94 Off Center Lights 3 Inch (LED)...30 Off Center Lights 3 Inch (LED) Retro-Fit ( A)...96 Rotary Cutter Tire Options...42 Splitter Box Sliding Cover...32 Weight Box /11/18 RC4610 & RCM4610 Rotary Cutter P 3

4 4 RC4610 & RCM4610 Rotary Cutter P 07/11/18

5 07/11/18 RC4610 & RCM4610 Rotary Cutter P 5

6 Blade Carrier Table of Contents Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

7 Section 2: Decks & Hitches Blade Carrier Table of Contents Ref. Part No. Part Description Comments Revision Dwg H C C C C C C C A Image No. DISHPAN 15 CENTERS W/HVY HUB BLD BLT 1 1/8-12X44 W/.25KEY NUT HEX TOP LOCK 1 1/8-12 PLT WASHER FLAT 1" HARDENED CUTTER BLADE 1/2X4X31 CCW CUTTER BLADE 1/2X4X31 LL CCW CUTTER BLADE 1/2X4X25 CCW CUTTER BLADE 1/2X4X25 LL CCW BLADE BOLT KIT Center deck (standard) Center deck (low lift) good for tall weeds and brush Wing deck (standard) Wing deck (low lift) good for tall weeds and brush 07/11/18 RC4610 & RCM4610 Rotary Cutter P 7

8 Deck Center Components Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

9 Deck Center Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg H H D H H H H H H H H H H C C C C C Image No. WLDMT. SKID SHOE RH. WLDMT. SKID SHOE LH. RH FRONT DEFLECTOR CENTER DECK WO/DR CENTER DECK WO/DR GREEN CENTER DECK WO/DR ORANGE CENTER DECK WO/DR RED CENTER DECK WO/DR, YELLOW CENTER DECK W/DR CENTER DECK W/DR GREEN CENTER DECK W/DR ORANGE CENTER DECK W/DR RED CENTER DECK W/DR, YELLOW RHSNB 3/8-16X1 GR5 RHSNB 1/2-13X1 1/4 GR5 NUT HEX FLG LOCK 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT PLUG LP 3" ID RUBBER Beige Green Orange Red Yellow Beige Green Orange Red Yellow 07/11/18 RC4610 & RCM4610 Rotary Cutter P 9

10 Deck Center Drive Components Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

11 Deck Center Drive Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg H S D V S H H C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. WLDMT. SHAFT PROTECTOR MANUAL STORAGE CONTAINER KIT SPLITTER OFFSET PANEL SLIDING SHIELD ASSY, 50 GB GEARBOX BEARING BLOCK MNT SLIDING SHIELD SPLITTER MNT 46 FRONT SPLITTER SHIELD RC4615 PAN HD 1/4-20X3/4 PHILLIPS SS HHCS 1/4-20X1 GR5 HHCS 5/16-18X3/4 GR5 HHCS 5/8-11X1 3/4 GR5 HHCS 5/8-11X2 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 HHCS 3/4-10X3 GR5 HHCS M8X25X35 GR8.8 NUT HEX NYLOCK 1/4-20 NUT HEX FLANGE LOCK 5/8-11 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1/4 SAE SS MANUAL STORAGE CONTAINER KNOB 1/2-13 MALE THD 2 3/8OD DRVLN C FX CLTCH DIV BOX 540RPM 1 3/4-20 DIV BOX 1000RPM 1 3/4-20 DRVLN C CV DRVLN C CV DRVLN C CV DRVLN C CV ORCLTCH GBOX RC50 1:60 STD GBOX RC50 15:1 STD DRIVELINE SHIELD CONE, 2 PIECE SHIELD SPACER HHCS M8X25X20 GR8.8 THD-LCK Only used with ITG divider box Only used with ITG divider box Only used with ITG divider box Only used with ITG divider box RC4610 ITG and Comer RCM4610 ITG And Comer RC4610 RCM4610 RCM4610 RCM4610 RC4610 RCM4610 Only used with ITG divider box 07/11/18 RC4610 & RCM4610 Rotary Cutter P 11

12 Deck Wing Components Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

13 Deck Wing Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D H H H H H H H H H H H H C C C C C C C L Image No. DEFLECTOR RH HINGE ROD DECK RH WING WO/DR DECK RH WING WO/DR GREEN DECK RH WING WO/DR ORANGE DECK RH WING WO/DR RED DECK RH WING WO/DR, YELLOW DECK RH WING W/DR DECK RH WING W/DR GREEN DECK RH WING W/DR ORANGE DECK RH WING W/DR RED DECK RH WING W/DR, YELLOW BEVELED SKID SHOE RH HHCS 3/8-16X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT NUT HEX WHIZ 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT PLUG LP 3" ID RUBBER ASSY HINGE ROD Beige Green Orange Red Yellow Beige Green Orange Red Yellow 07/11/18 RC4610 & RCM4610 Rotary Cutter P 13

14 Deck Wing Drive Components Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

15 Deck Wing Drive Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D C C C C C C C C C C C Image No. GB MOUNT PLATE HHCS 3/4-10X3 GR5 NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT COMER U DIPSTICK DRVLN C FX CLTCH DRVLN C FX CLTCH GBOX RC50 1:60 REV GBOX RCM50 1:21 REV DRIVELINE SHIELD CONE, 2 PIECE HHCS M8X25X20 GR8.8 THD-LCK 540 RPM 1000 RPM 07/11/18 RC4610 & RCM4610 Rotary Cutter P 15

16 Hitch A-Frame Table of Contents Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

17 Section 2: Decks & Hitches Hitch A-Frame Table of Contents Ref. Part No. Part Description Comments Revision Dwg D D D H H C C C C C C C C C C C C C C C N\A C Image No. PTO HANGER BUSHING PTO HANGER STOP PTO HANGER ADJUSTABLE JACK MOUNT HITCH W/ ADJ JACK MNT GREASE ZERK STRAIGHT 1/4-28 HHCS 1-8X2 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 HHCS 1-8X5 GR5 NUT HEX 3/8-16 PLT NUT HEX 1/2-13 PLT NUT HEX 1-8 PLT NUT HEX TOP LOCK 1-8 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 USS PLT SAFETY CHAIN LB SIDEWIND JACK 7000 LB Available with sidewind jack 07/11/18 RC4610 & RCM4610 Rotary Cutter P 17

18 Hitch Ball Coupler Table of Contents Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

19 Hitch Ball Coupler Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H C C Drawing Image Number 2 5/16" BALL HITCH ASSEMBLY * 2 5/16" BALL HITCH WELDMENT HHCS 5/8-11X1 3/4 GR5 NUT HEX WHIZ 5/8-11 PLT For 2-5/16" Ball 07/11/18 RC4610 & RCM4610 Rotary Cutter P 19

20 Hitch Bar Tite Table of Contents Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

21 Section 2: Decks & Hitches Hitch Bar Tite Table of Contents Ref. Part No. Part Description Comments Revision Dwg A H H H D D H C C C C C C C C C C C C C C C K Drawing Image Number BAR TITE HITCH * SHAFT WELDMENT WELDMENT HITCH CLEVIS SWIVEL RECEIVER HITCH WEAR PLATE WIDE FORMED HITCH SUPPORT WIDE BAR TITE WIDE TOP GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 3/4-10X6 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X5 1/2 GR5 NUT HEX TOP LOCK 1-8 PLT NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT WASHER FLAT 50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 50ODX00IDX25 BAR TITE HITCH WIDE 07/11/18 RC4610 & RCM4610 Rotary Cutter P 21

22 Hitch LP Performance Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

23 Hitch LP Performance Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A * H D H H C C C C C C C C C C C C C Image No. LP PERFORMANCE HITCH SWIVEL RECEIVER HITCH HOLDER HITCH CLEVIS HITCH YOKE GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X7 GR5 HHCS 3/8-16X1 1/4 GR5 NUT HEX COUPLER 3/8-16X1 3/4 NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1 1/4X1X1/2 HRD BUSHING 1 1/4X1X5/8 07/11/18 RC4610 & RCM4610 Rotary Cutter P 23

24 Hitch Pintel Table of Contents Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

25 Section 2: Decks & Hitches Hitch Pintel Table of Contents Ref. Part No. Part Description Comments Revision Dwg A H C C C C C Drawing Image Number PINTLE HITCH * PINTLE RECEIVER HHCS 5/8-11X1 3/4 GR5 HFS 5/8-11X2 1/2 GR8 PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX WHIZ 5/8-11 PLT PINTLE HOOK SQ.BASE BDB /11/18 RC4610 & RCM4610 Rotary Cutter P 25

26 Hitch Standard Pivoting Clevis Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

27 Hitch Standard Pivoting Clevis Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A D H H C C C C C C Drawing Image Number STANDARD HITCH * SPACER HITCH CLEVIS WELDMENT YOKE HITCH 3615 HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR5 HHCS 5/8-11X8 1/2 GR5 NUT LOCK 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT 07/11/18 RC4610 & RCM4610 Rotary Cutter P 27

28 Leveling Rod Table of Contents Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

29 Section 2: Decks & Hitches Leveling Rod Table of Contents Ref. Part No. Part Description Comments Revision Dwg H H K C C C C C Image No. WLDMT. LEVEL ROD SHORT LEVEL ROD LONG LEVEL ROD NUT HEX JAM 7/8-9 NUT HEX COUPLER 7/8-9X5 WASHER FLAT 3/4 SAE PLT PIN CLVS.75X50 USBL HT PIN COTTER 1/8 X 1 1/4 PLT 07/11/18 RC4610 & RCM4610 Rotary Cutter P 29

30 Off Center Lights 3 Inch (LED) Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

31 Off Center Lights 3 Inch (LED) Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg L A D D D C C C C C C C C C J-37-R J-37-A J-AC1-15-B C J-37-R J-37-A J-AC1-15-B C C C C C Image No. OFFSET CUTTER LIGHT KIT 3" OFFSET CUTTER LIGHT KIT 3" * LIGHT MNT LIGHT GUARD LIGHT MNT CLAMP CABLE TIE.19X125 3DIA 50LB RHSNB 3/8-16X1 GR5 HHCS 3/8-16X4 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER LIGHT WIRE HARNESS 8' RPBY C ENHANCE MODULE LEAD WIRE HARNESS 8' LIGHT MAGNETS WITH HARDWARE S/N Lights are now standard S/N Lights were optional Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens Obsolete 07/11/18 RC4610 & RCM4610 Rotary Cutter P 31

32 Splitter Box Sliding Cover Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

33 Splitter Box Sliding Cover Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D V H S C C C C C C C C C C C C J200UM Image No. SLIDING SHIELD SLIDING SHIELD ASSY, 50 GB SLIDING SHIELD GB MNT, 50/60GB GEARBOX BEARING BLOCK MNT PAN HD 1/4-20X3/4 PHILLIPS SS HHCS 1/4-20X1/2 GR5 HHCS M6X1X SS NUT HEX NYLOCK 1/4-20 WASHER LOCK SPRING 1/4 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 1/4 SAE SS HANDLE GRAB 4 1/8WIDE1 1/2TALL HHCS M8X25X20 GR8.8 THD-LCK WS-10 GUIDE RAIL FLOATING ZINC BEARING BLOCK REPLACEMENT LINER With Liners 07/11/18 RC4610 & RCM4610 Rotary Cutter P 33

34 Weight Box Table of Contents Section 2: Decks & Hitches RC4610 & RCM4610 Rotary Cutter P 07/11/18

35 Section 2: Decks & Hitches Weight Box Table of Contents Ref. Part No. Part Description Comments Revision Dwg D D D H L D D D H H H H H K K C C C C C C C C C C C Image No. SKID SHOE WTBX ROUND ROD.25 X 14 ROUND ROD.25 X HINGE ROD ASSY HINGE ROD FRONT WEIGHT BOX LOCK FRONT WEIGHT BOX CHAIN GUARD REAR WEIGHT BOX CHAIN GUARD WEIGHT BOX WEIGHT BOX, GREEN WEIGHT BOX, ORANGE WEIGHT BOX, RED WEIGHT BOX, YELLOW FRONT WEIGHT BOX CHAIN GUARD REAR WEIGHT BOX CHAIN GUARD RHSNB 3/8-16X1 GR5 HHCS 3/8-16X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 HHCS 1-8X3 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX WHIZ 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 4 LINK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 35

36 Axle Center Table of Contents Section 3: Axles RC4610 & RCM4610 Rotary Cutter P 07/11/18

37 Section 3: Axles Axle Center Table of Contents Ref. Part No. Part Description Comments Revision Dwg H K H H C C C C C C C C C C C C C C C Image No. PIVOT PIN TRAILING ARM HUB 5 BOLT COMPLETE TRAILING ARM CENTER CENTER AXLE GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 1-8X9 GR5 HHCS 1-8X5 1/2 GR5 NUT LOCK 1/2-13 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT PIN COTTER 3/16 X 2 SPRING COMP 20OD.63W 5.5L SPINDLE, DUAL BOLT-ON 7/8-14 BHG 50ODX25X38 Used only on right hand side Used only on right hand side 07/11/18 RC4610 & RCM4610 Rotary Cutter P 37

38 Axle Wing Table of Contents Section 3: Axles RC4610 & RCM4610 Rotary Cutter P 07/11/18

39 Section 3: Axles Axle Wing Table of Contents Ref. Part No. Part Description Comments Revision Dwg H S K H H H L H S C C C C C C C C C C C C C C C C Image No. PIVOT PIN TRAILING ARM WG ASY PIVOT PIN TRAIL ARM WG HUB 5 BOLT COMPLETE WING AXLE RH WING AXLE LH TRAILING ARM WING SPINDLE AND HUB ASSY WING TRAILING ARM PIVOT PIN WING TRAILING ARM PIV PIN ASY GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 1-8X6 GR5 HHCS 1-8X5 GR8 PLT SPTHD NUT LOCK 1/2-13 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT PIN COTTER 3/16 X 2 SPRING COMP 20OD.63W 5.5L SINGLE AXLE SPINDLE, WING BHG 50ODX25X38 S/N S/N S/N S/N S/N S/N /11/18 RC4610 & RCM4610 Rotary Cutter P 39

40 Hub Assembly ( K) Section 3: Axles RC4610 & RCM4610 Rotary Cutter P 07/11/18

41 Hub Assembly ( K) Section 3: Axles Ref. Part No. Part Description Comments Revision Dwg D K C C C C C C C C C C C C C Image No. HUB GREASE CAP HUB 5 BOLT COMPLETE GREASE ZERK 1/4-28 THD FORMING HUB STUD 1/2-20X88 GR5 NUT HEX SLOTTED 7/8-14 PLT NUT HEX 1/2-20 X 5/8 HIGH WASHER SPINDLE - 7/8 PIN COTTER 5/32 X 1 3/4 LG HUB 5-BOLT W/CUPS/STUDS SEAL 75ID CR17617 BRG CUP LM BRG CONE 25ID LM BRG CUP LM BRG CONE LM HUB 5-BOLT CASTING 07/11/18 RC4610 & RCM4610 Rotary Cutter P 41

42 Rotary Cutter Tire Options Section 3: Axles RC4610 & RCM4610 Rotary Cutter P 07/11/18

43 Rotary Cutter Tire Options Section 3: Axles Ref. Part No. Part Description Comments Revision Dwg C C C C C C C Image No. TIRE & WHL LAM. 6X9X21(5-BOLT) TIRE, AC 29" 16 PLY 5 BOLT TIRE H29X9.0X15 USED TUBE FOR 29X RIM 2PC 5BLT 15X6.5 NEW TIRE FF 25.5X PLY NEW TIRE 25.5X PLY 07/11/18 RC4610 & RCM4610 Rotary Cutter P 43

44 Chain Guards Front Double Section 4: Guards RC4610 & RCM4610 Rotary Cutter P 07/11/18

45 Chain Guards Front Double Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D D D K K K K D D D D C C C C Image No. CHNGRD FRONT DOUBLE, OFFSET * ROUND ROD 1/4 X 36 ROUND ROD 1/4 X 73 ROUND ROD 1/4 X 25 ASSY. DUAL CHAINGUARD FRT.CTR ASSY.DUAL CHAINGUARD FRT.WING CHNGRD DBL FRT RH CHNGRD DBL FRT LH FRONT WING DOUBLE CHAINGUARD CHNGRD DBL FRT RH CHNGRD DBL FRT LH CHNGRD DBL FRT CNT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 5 LINK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 45

46 Chain Guards Front Single Section 4: Guards RC4610 & RCM4610 Rotary Cutter P 07/11/18

47 Chain Guards Front Single Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D K K D D K K D D D D C C C C Image No. CHNGRD FRONT SINGLE, OFFSET * ROUND ROD 1/4 X 36 ASSY. CHAINGUARD FRT. CTR. ASSY. CHAINGUARD FRT. WING ROD 1/4 X 28 ROUND ROD 1/4 X 73 CHNGRD SGL FRT RH CHNGRD SGL FRT LH FRONT WING CHAINGUARD CHNGRD SGL FRT RH CHNGRD SGL FRT LH CHNGRD SGL FRT CNT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 5 LINK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 47

48 Chain Guards Rear Double Section 4: Guards RC4610 & RCM4610 Rotary Cutter P 07/11/18

49 Chain Guards Rear Double Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D D D D K K C C C C Image No. CHNGRD REAR DOUBLE, OFFSET * ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 9 CHNGRD REAR CNTR INNER DBL CHNGRD DBL REAR OUT CHNGRD CNTR REAR INNER DBL CHNGRD DBL REAR OUT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 7-LINK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 49

50 Chain Guards Rear Single Section 4: Guards RC4610 & RCM4610 Rotary Cutter P 07/11/18

51 Chain Guards Rear Single Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D D D D K K C C C C Image No. CHNGRD REAR SINGLE, OFFSET * ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 9 BRACKET CHNGRD CNTR INNER CHNGRD SGL REAR OUT CHNGRD CNTR REAR INNER CHNGRD SGL REAR OUT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 7-LINK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 51

52 Driveline Center ( C) Comer Section 5: Drivelines RC4610 & RCM4610 Rotary Cutter P 07/11/18

53 Driveline Center ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C FX CLTCH COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE, OUTER COMER SHAFT, SPLINED COMER ROLL PIN, INNER TUBE CO INNER YOKE COMER CLUTCH, COMPLETE ASSY COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 07/11/18 RC4610 & RCM4610 Rotary Cutter P 53

54 Driveline CV RPM ( C) Weasler Section 5: Drivelines Applies to RCM RC4610 & RCM4610 Rotary Cutter P 07/11/18

55 Driveline CV RPM ( C) Weasler Section 5: Drivelines Applies to RCM4610 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET 07/11/18 RC4610 & RCM4610 Rotary Cutter P 55

56 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Applies to RCM4610 Section 5: Drivelines RC4610 & RCM4610 Rotary Cutter P 07/11/18

57 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Section 5: Drivelines Applies to RCM4610 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV ORCLTCH * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE OUTER GUARD WE GUARD REPAIR KIT WE SAFETY SIGN WE SAFETY SIGN WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE OVERRUNNING THRST CLTCH ASM 07/11/18 RC4610 & RCM4610 Rotary Cutter P 57

58 Driveline CV RPM ( C) Section 5: Drivelines Applies to RCM RC4610 & RCM4610 Rotary Cutter P 07/11/18

59 Driveline CV RPM ( C) Section 5: Drivelines Applies to RCM4610 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD 07/11/18 RC4610 & RCM4610 Rotary Cutter P 59

60 Driveline CV 540 RPM ( C) Weasler Section 5: Drivelines Applies to RC RC4610 & RCM4610 Rotary Cutter P 07/11/18

61 Driveline CV 540 RPM ( C) Weasler Section 5: Drivelines Applies to RC4610 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT W/ CHAINS WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET 07/11/18 RC4610 & RCM4610 Rotary Cutter P 61

62 Driveline Wing ( C) Comer Section 5: Drivelines RC4610 & RCM4610 Rotary Cutter P 07/11/18

63 Driveline Wing ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C FX CLTCH COMER YOKE COMPLETE CO CROSS JOURNAL SET COMER CLUTCH, COMPLETE ASSY CO RETAINING COLLAR OUTER TUBE RPBY CO RETAINING COLLAR INNER TUBE CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARD COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER CO LABEL W/CUSTOMER CODE 07/11/18 RC4610 & RCM4610 Rotary Cutter P 63

64 Driveline Wing ( C) Comer Section 5: Drivelines RC4610 & RCM4610 Rotary Cutter P 07/11/18

65 Driveline Wing ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C FX CLTCH COMER YOKE COMPLETE CO CROSS JOURNAL SET N/A CO GREASE NIPPLE COMER YOKE OUTER COMER OUTER TUBE ROLL PIN CO COMPLETE OUTER TUBE W/LABEL COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP CO LABEL W/CUSTOMER CODE available only in cross journal set (#2) 07/11/18 RC4610 & RCM4610 Rotary Cutter P 65

66 Gearbox ( C) Applies to RC4610 Section 6: Gearboxes RC4610 & RCM4610 Rotary Cutter P 07/11/18

67 Gearbox ( C) Section 6: Gearboxes Applies to RC4610 Ref. Part No. Part Description Comments Revision Dwg C U U U A U A U U U C Drawing Image Number GBOX RC :60 CW * CO HOUSING CO GEAR CROWN Z24 M7.25 CO BRG TAPPERED CO OIL SEAL 45 X 85 X 10 SL CO INPUT SHAFT 1 3/4"-20 CO SNAP RING UNI 7437 COMER SHIM KIT CO SNAP RING 50 UNI7435 CO CASTLE NUT COMER SHIM KIT CO BRG TAPPERED CO SEAL PROTECTOR CO OIL SEAL 60X110X12 SL CO BRG TAPPERED CO OUTPUT SHAFT CO COTTER PIN B 5X60 CO CAP CO BLANK WASHER CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO TOP COVER CO BOLT M10X22 HHB CO PLUG 1/2" GAS CO OIL PLUG 3/8 CO CASTLE NUT M36X3 GEAR PINION Z15 M7.25 CO COTTER PIN B6X70 SLD-SPRTLY COMER U DIPSTICK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 67

68 Gearbox 1000 RPM ( C) Applies to RCM4610 Section 6: Gearboxes RC4610 & RCM4610 Rotary Cutter P 07/11/18

69 Gearbox 1000 RPM ( C) Section 6: Gearboxes Applies to RCM4610 Ref. Part No. Part Description Comments Revision Dwg C U U U U U U C U Drawing Image Number GBOX RCM :21 CW * CO HOUSING CO CROWN GEAR Z22 M7.8 CO BEARING RTA25 CO OIL SEAL 45 X 85 X 10 CO INPUT SHAFT 1 3/4"-20 CO SNAP RING UNI 7437 CO SHIM 87 CO SNAP RING 50 UNI7435 CO CASTLE NUT CO SHIM 50.3X70.3 CO BEARING CO SEAL PROTECTOR CO OIL SEAL 60X110X12 CO BEARING CO OUTPUT SHAFT CO COTTER PIN B 5X60 CO CAP CO BLANK WASHER CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO COVER CO BOLT M10X22 HHB COMER U OIL PLUG CO OIL PLUG 3/8 CO COTTER PIN B6X70 SLD-SPRTLY CO CASTLE NUT M36X3 CO CROWN GEAR Z18 M7.8 R. H. Deck 07/11/18 RC4610 & RCM4610 Rotary Cutter P 69

70 Gearbox 1000 RPM ( C) Applies to RCM4610 Section 6: Gearboxes RC4610 & RCM4610 Rotary Cutter P 07/11/18

71 Gearbox 1000 RPM ( C) Section 6: Gearboxes Applies to RCM4610 Ref. Part No. Part Description Comments Revision Dwg C U U U U U U C U Drawing Image Number GBOX RC50 15:1 STD * CO HOUSING CO GEAR PINION Z19 M7.8 CO BEARING RTA25 CO OIL SEAL 45 X 85 X 10 CO INPUT SHAFT 1 3/4"-20 CO SNAP RING UNI 7437 CO SHIM 87 CO SNAP RING 50 UNI7435 CO CASTLE NUT CO SHIM 50.3X70.3 CO BEARING CO SEAL PROTECTOR CO OIL SEAL 60X110X12 CO BEARING CO OUTPUT SHAFT CO COTTER PIN B 5X60 CO CAP CO BLANK WASHER CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO COVER CO BOLT M10X22 HHB COMER U OIL PLUG CO OIL PLUG 3/8 CO COTTER PIN B6X70 SLD-SPRTLY CO CASTLE NUT M36X3 CO GEAR CROWN Z22 M7.8 * Notes: Oil Type 80-90W Capacity 10 Pints Center Deck 07/11/18 RC4610 & RCM4610 Rotary Cutter P 71

72 Gearbox 540 RPM ( C) Applies to RC4610 Section 6: Gearboxes RC4610 & RCM4610 Rotary Cutter P 07/11/18

73 Gearbox 540 RPM ( C) Section 6: Gearboxes Applies to RC4610 Ref. Part No. Part Description Comments Revision Dwg C U U U A U A U U U C Drawing Image Number GBOX RCF :60 CCW * CO HOUSING CO GEAR CROWN Z24 M7.25 CO BRG TAPPERED CO OIL SEAL 45 X 85 X 10 SL CO INPUT SHAFT 1 3/4"-20 CO SNAP RING UNI 7437 COMER SHIM KIT CO SNAP RING 50 UNI7435 CO CASTLE NUT COMER SHIM KIT CO BRG TAPPERED CO SEAL PROTECTOR CO OIL SEAL 60X110X12 SL CO BRG TAPPERED CO OUTPUT SHAFT CO COTTER PIN B 5X60 CO CAP CO BLANK WASHER CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO TOP COVER CO BOLT M10X22 HHB CO PLUG 1/2" GAS CO OIL PLUG 3/8 CO CASTLE NUT M36X3 GEAR PINION Z15 M7.25 CO COTTER PIN B6X70 SLD-SPRTLY COMER U DIPSTICK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 73

74 Gearbox Divider 1000 RPM ( C) Comer Section 6: Gearboxes Applies to RCM RC4610 & RCM4610 Rotary Cutter P 07/11/18

75 Gearbox Divider 1000 RPM ( C) Comer Section 6: Gearboxes Applies to RCM4610 Ref. Part No. Part Description Comments Revision Dwg C N/A N/A C C A Drawing Image Number DIV BOX COMER 1000RPM 1 3/4-20 * CO BOLT M10 X TOP COVER PLATE CO BEARING RTA25 CO SNAP RING CO OIL SEAL 45 X 85 X 10 CO CASING CO SHIM 87 RPBY A CO SHAFT 1" 3/4 Z20 CO SHAFT 1" 3/4 Z20 RPBY A CO PLUG 3/8 GAS COMER DIPSTICK COMER VENT # CO TRIAD GEAR Z20-Z24-Z24 M6.5 * Notes: Oil Type 80-90W Capacity 5.5 Pints S/N S/N Contains 2 of gear #8 and 1 of gear #11 07/11/18 RC4610 & RCM4610 Rotary Cutter P 75

76 Gearbox Divider 1000 RPM ( C) ITG Section 6: Gearboxes Applies to RCM RC4610 & RCM4610 Rotary Cutter P 07/11/18

77 Gearbox Divider 1000 RPM ( C) ITG Section 6: Gearboxes Applies to RCM4610 Ref. Part No. Part Description Comments Revision Dwg C C B Drawing Image Number DIV BOX 1000RPM 1 3/4-20 * ITG HOUSING WASHER SPRING LOCK M10 PLT ITG M10 X 5 X 30 CAP SCREW ITG INPUT CAP SPLITTER BOX ITG INPUT SHAFT ITG INPUT SHAFT OIL SEAL ITG BRG ASSEMBLY ITG INPUT CAP GASKET 0.10MM ITG INPUT CAP GASKET 0.25MM ITG IN & OUT CAP GASKET 0.45MM ITG HORIZONTAL HUB CAP ITG OUTPUT SEAL 58X95X10 THK ITG OUTPUT SHAFT ITG SPACER ITG SHIM 0.3 ITG SHIM 0.4 ITG SHIM TOOTH GEAR ITG 23 TOOTH GEAR ITG BRG ADJ. NUT ITG COTTER PIN ITG SEALING WASHER ITG DRAIN PLUG ITG M18X5 DIP STICK BREATHER ITG M18 X 5P PLUG VENTED * Notes: Oil Type 80-90W Capacity 5.5 Pints S/N + S/N - 07/11/18 RC4610 & RCM4610 Rotary Cutter P 77

78 Gearbox Divider 540 RPM ( C) Comer Section 6: Gearboxes Applies to RC RC4610 & RCM4610 Rotary Cutter P 07/11/18

79 Gearbox Divider 540 RPM ( C) Comer Section 6: Gearboxes Applies to RC4610 Ref. Part No. Part Description Comments Revision dwg C A N/A N/A C C A Drawing Image Number DIV BOX COMER 540RPM 1 3/4-20 * CO BOLT M10 X TOP COVER PLATE CO BEARING RTA25 CO SNAP RING CO OIL SEAL 45 X 85 X 10 CO CASING COMER SHIM KIT RPBY A CO SHAFT 1" 3/4 Z20 CO SHAFT 1" 3/4 Z20 RPBY A CO PLUG 3/8 GAS COMER DIPSTICK COMER VENT # CO TRIAD GEAR Z20-Z20-Z24 M6.5 * Notes: Oil Type 80-90W Capacity 5.5 Pints S/N S/N Contains 2 of gear #8 and 1 of gear #11 07/11/18 RC4610 & RCM4610 Rotary Cutter P 79

80 Gearbox Divider 540 RPM ( C) ITG Section 6: Gearboxes Applies to RC RC4610 & RCM4610 Rotary Cutter P 07/11/18

81 Gearbox Divider 540 RPM ( C) ITG Section 6: Gearboxes Applies to RC4610 Ref. Part No. Part Description Comments Revision Dwg C C B Drawing Image Number DIV BOX 540RPM 1 3/4-20 * ITG HOUSING WASHER SPRING LOCK M10 PLT ITG M10 X 5 X 30 CAP SCREW ITG INPUT CAP SPLITTER BOX ITG INPUT SHAFT ITG INPUT SHAFT OIL SEAL ITG BRG ASSEMBLY ITG INPUT CAP GASKET 0.10MM ITG INPUT CAP GASKET 0.25MM ITG IN & OUT CAP GASKET 0.45MM ITG HORIZONTAL HUB CAP ITG OUTPUT SEAL 58X95X10 THK ITG OUTPUT SHAFT ITG SPACER ITG SHIM 0.3 ITG SHIM 0.4 ITG SHIM 0.5 ITG 23 TOOTH GEAR 19 TOOTH GEAR ITG BRG ADJ. NUT ITG COTTER PIN ITG SEALING WASHER ITG DRAIN PLUG ITG M18X5 DIP STICK BREATHER ITG M18 X 5P PLUG VENTED * Notes: Oil Type 80-90W Capacity 5.5 Pints S/N + S/N - 07/11/18 RC4610 & RCM4610 Rotary Cutter P 81

82 Hydraulic Components Section 7: Hydraulics RC4610 & RCM4610 Rotary Cutter P 07/11/18

83 Hydraulic Components Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg H D C C C C C C C C C C C C C C C C C Image No. WLDMT. CYLINDER PIN TRANSPORT BAR CABLE TIE.19X125 3DIA 50LB FILL PLUG VENTED 3/4-16 PLT HHCS 3/8-16X1 GR5 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT WASHER FLAT 1 SAE PIN, HAIR COTTER 3/16 WIRE DIA PIN COTTER 3/16 X 1 1/2 PLT SPRING HOSE LOOP CYL 3X12X25 ROD (TIE ROD) CYL 3X8X25 ROD (TIE) NO PINS STRK CNTRL SPCRS 125 TO 50 OREL 1/32 9/16MJIC 9/16MORB EL 3/4MJIC 3/4MORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 3/4FJIC HH3/8R /4MORB 9/16FJIC MON PIN KIT 00C/W COTTER PIN Includes 2 clevis pins & 4 cotter pins 07/11/18 RC4610 & RCM4610 Rotary Cutter P 83

84 Hydraulic Cylinder ( C) Cross Section 7: Hydraulics RC4610 & RCM4610 Rotary Cutter P 07/11/18

85 Hydraulic Cylinder ( C) Cross Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C 1D A A D A D A D A D D D A C C Drawing Image Number CYL 3X12X25 ROD (TIE ROD * BASE CROSS CROSS NUT,CLEVIS AND TIE ROD O-RING TIE ROD CROSS TUBE CROSS CROSS SCREW CAP CROSS CLEVIS PIN CROSS PIN,CLIP CROSS ROD CLEVIS CROSS NUT, CLEVIS AND TIE ROD ROD CROSS WIPER BACK-UP O-RING HEAD CROSS BACK UP PISTON CROSS CROSS NUT,PISTON SEAL KIT MW 5X25ROD 3A3104 SEAL KIT CROSS 5 CYL 1C498 Only found in seal kit 20. Only found in seal kit 20. Only found in seal kit 20. Only found in seal kit 20. Only found in seal kit /11/18 RC4610 & RCM4610 Rotary Cutter P 85

86 Hydraulic Cylinder ( C) Lion Section 7: Hydraulics RC4610 & RCM4610 Rotary Cutter P 07/11/18

87 Hydraulic Cylinder ( C) Lion Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C N/A N/A N/A N/A N/A N/A C Drawing Image Number CYL 3X12X25 ROD (TIE ROD) * NUT HEX 1/2-13 PLT MON PISTON NUT SCREW SET SH 3/8-16X3/8 TYPE C PLUG 9/16-18UNF MORB SOCKET HD MON ROD SEAL MON PISTON SEAL (PSP) MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING MON PISTON 00-0-TSS-ISO-WR MON CYL TUBE MON TIE ROD LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 0-9/16 ORB MON ROD CAP /16ORBTS MON CYL ROD MON SEAL KIT Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 07/11/18 RC4610 & RCM4610 Rotary Cutter P 87

88 Hydraulic Cylinder ( C) Midway Section 7: Hydraulics RC4610 & RCM4610 Rotary Cutter P 07/11/18

89 Hydraulic Cylinder ( C) Midway Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C 1M6010 2M4418 3M4410 4M4104 5M4120 6M4152 7M4320 2A0208 N/A N/A N/A N/A N/A 2A0024 2A0014 2A0012 2A0006 2A C N/A Drawing Image Number CYL 3X12X25 ROD (TIE ROD * MW CLEVIS STD. DUTY MW ROD 1-1/4 DIA. X 10 STROKE MW HEAD CAP 3X1-1/4 RD 9/16SAE MW PISTON 3 DIA. MW TUBE 3 X 15 CYLINDER MW BASE 3 X 9/16 SAE MW TIE ROD 3 X 10 CYLINDER MW CLEVIS PIN MW WIPER MW O-RING MW BACK-UP MW O-RING MW BACK UP MW PISTON NUT 1-14 MW TIE ROD NUT MW NUT CLEVIS & TIE ROD MW CAPSCREW MW PIN CLIP CYL SEAL KIT 3 X 7 MW 3A4104 Crown Seal Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 As Required 07/11/18 RC4610 & RCM4610 Rotary Cutter P 89

90 Hydraulic Cylinder ( C) Midway Section 7: Hydraulics RC4610 & RCM4610 Rotary Cutter P 07/11/18

91 Hydraulic Cylinder ( C) Midway Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C 6R1164-ADI 6M4166 2A0014 7M4316 5M4116 2A0006 1M6010-ADI 2A0012 2M4416 3M4412 4M4104 2A C Drawing Image Number CYL 3X8X25 ROD (TIE) NO PINS * MIDWAY ADI BASE RPBY 6R1164-ADI MW TIE ROD NUT O-RING MW TIE ROD 3 X 8 CYLINDER MW TUBE 3 X 8 CYLINDER MW CAPSCREW MIDWAY HARDENED CLEVIS ADI MW NUT CLEVIS & TIE ROD MW ROD 1-1/4 DIA X 8 STROKE WIPER BACK-UP O-RING MW HEAD CAP 3X1-1/4 ROD 3/4SAE BACK-UP MW PISTON 3 DIA. MW PISTON NUT 1-14 CYL SEAL KIT 3 X 7 MW 3A4104 Only found in sealkit 17 Only found in sealkit 17 Only found in sealkit 17 Only found in sealkit 17 Only found in sealkit 17 07/11/18 RC4610 & RCM4610 Rotary Cutter P 91

92 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics RC4610 & RCM4610 Rotary Cutter P 07/11/18

93 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C N/A N/A N/A N/A N/A N/A C Drawing Image Number CYL 3X8X25 ROD (TIE) NO PINS * NUT HEX 1/2-13 PLT MON PISTON NUT SCREW SET SH 3/8-16X3/8 TYPE C LION PLUG 3/4-16UNF SOCKET HD MON ROD SEAL MON PISTON SEAL (PSP) MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING MON TIE ROD EXTND THD MON PISTON TSS-ISO-WR MON CYL TUBE MON TIE ROD MON ROD CP /16ORB-TS MON CLEVIS CAP MON CYL ROD LION HARDENED ROD CLEVIS 1 1/4 MON SEAL KIT Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 07/11/18 RC4610 & RCM4610 Rotary Cutter P 93

94 Manual Winch Wing Deck Section 8: Options & Accessories RC4610 & RCM4610 Rotary Cutter P 07/11/18

95 Manual Winch Wing Deck Section 8: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A H C C C C C C C C C C Drawing Image Number MECHANICAL WINCH RC55 * MECHANICAL WINCH HHCS 3/8-16X1 3/4 GR5 HHCS 5/8-11X2 GR5 NUT LOCK 3/8-16 PLT NUT HEX FLANGE LOCK 5/8-11 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 5/8 USS PLT BRAKE WINCH DLB2000 WINCH HANDLE 12" DBL2000 WINCH CABLE AND HOOK 07/11/18 RC4610 & RCM4610 Rotary Cutter P 95

96 Off Center Lights 3 Inch (LED) Retro-Fit ( A) Section 8: Options & Accessories RC4610 & RCM4610 Rotary Cutter P 07/11/18

97 Off Center Lights 3 Inch (LED) Retro-Fit ( A) Section 8: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg L M D D D C C C C C C C C C J-37-R J-37-A J-AC1-15-B C J-37-R J-37-A J-AC1-15-B C C C C C Image No. OFFSET CUTTER LIGHT KIT 3" ROTARY CUTTER LIGHT KIT MANUAL * LIGHT MNT LIGHT GUARD LIGHT MNT CLAMP CABLE TIE.19X125 3DIA 50LB RHSNB 3/8-16X1 GR5 HHCS 3/8-16X4 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER LIGHT WIRE HARNESS 8' RPBY C ENHANCE MODULE LEAD WIRE HARNESS 8' LIGHT MAGNETS WITH HARDWARE Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens Obsolete 07/11/18 RC4610 & RCM4610 Rotary Cutter P 97