Rotary Cutters DB(M) P Parts Manual. Copyright 2018 Printed 07/10/18

Transcription

1 Rotary Cutters DB(M) P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2018 Printed 07/10/18 Cover photo may show optional equipment not supplied with standard unit.

2 Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Extension Arm Assembly...6 Hitch & Reservoir Assembly...8 Light Kit DB Weight Hangers...12 Section 3: Deck...14 Blade Drive...14 Deck Link & Cylinder...16 Spindle Hub Assembly ( C)...18 Section 4: Guards...20 Guard: Front Rubber...20 Guard: Front Single & Double Chain...22 Guard: Rear Rubber...24 Guard: Rear Single & Double Chain S/N Guard: Rear Single & Double Chain S/N Section 5: Hydraulics & Cylinders...30 Cylinders & Hoses...30 Deck Motor Hydraulics...32 Hydraulic Cylinder ( C) Lion...34 Hydraulic Cylinder ( C) Lion...36 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli...38 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli...40 Hydraulic Gear Increaser 1000 RPM ( C) Comer..42 Hydraulic Gear Increaser 540 RPM ( C) Bondioli..44 Hydraulic Gear Increaser 540 RPM ( C) Comer...46 Hydraulic Gear Increaser 540 RPM ( C) Bondioli..48 Hydraulic Gear Increaser 540 RPM ( C) Comer...50 Hydraulic Motor Ultra ( C)...52 Hydraulic Pump Ultra ( C)...54 Speed Increaser: Ditch Bank Mount...56 Speed Increaser: Tractor Mount...58 Section 6: Drivelines...60 Driveline 1000 ( C) Comer...60 Driveline 540 ( C) Comer...62 Section 7: Options & Accessories...64 Gauge Wheel Components: Side Wheel...64 Gauge Wheel Components: Tail Wheel...66 Hub Assembly 4-Bolt W/ Zerk & Studs ( C)...68 SMV Sign...70 Section 8: Decals...72 Decal Placement...72 Touch-up Paints Copyright All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 DB(M)2660 Rotary Cutters P 07/10/18

3 Alphabetized Table of Contents B C D E G H L S Blade Drive...14 Cylinders & Hoses...30 Decal Placement...72 Deck Link & Cylinder...16 Deck Motor Hydraulics...32 Driveline 1000 ( C) Comer...60 Driveline 540 ( C) Comer...62 Extension Arm Assembly...6 Gauge Wheel Components: Side Wheel...64 Gauge Wheel Components: Tail Wheel...66 Guard: Front Rubber...20 Guard: Front Single & Double Chain...22 Guard: Rear Rubber...24 Guard: Rear Single & Double Chain S/N Guard: Rear Single & Double Chain S/N Hitch & Reservoir Assembly...8 Hub Assembly 4-Bolt W/ Zerk & Studs ( C)...68 Hydraulic Cylinder ( C) Lion...34 Hydraulic Cylinder ( C) Lion...36 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli...38 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli...40 Hydraulic Gear Increaser 1000 RPM ( C) Comer...42 Hydraulic Gear Increaser 540 RPM ( C) Bondioli...44 Hydraulic Gear Increaser 540 RPM ( C) Comer...46 Hydraulic Gear Increaser 540 RPM ( C) Bondioli...48 Hydraulic Gear Increaser 540 RPM ( C) Comer...50 Hydraulic Motor Ultra ( C)...52 Hydraulic Pump Ultra ( C)...54 Touch-up Paints...74 Light Kit DB SMV Sign...70 Speed Increaser: Ditch Bank Mount...56 Speed Increaser: Tractor Mount...58 Spindle Hub Assembly ( C)...18 W Weight Hangers /10/18 DB(M)2660 Rotary Cutters P 3

4 4 DB(M)2660 Rotary Cutters P 07/10/18

5 07/10/18 DB(M)2660 Rotary Cutters P 5

6 Extension Arm Assembly Section 2: Frames DB(M)2660 Rotary Cutters P 07/10/18

7 Extension Arm Assembly Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C C Drawing Image Number EXTENSION ARM GREASE ZERK 1/4-28 THD FORMING HHCS 5/16-18X1 1/2 GR5 NUT LOCK 5/16-18 PLT WASHER FLAT 5/16 SAE PLT URETHANE BUMPER BUSHING PIVOT PIN 1 1/2 ID 07/10/18 DB(M)2660 Rotary Cutters P 7

8 Hitch & Reservoir Assembly Section 2: Frames DB(M)2660 Rotary Cutters P 07/10/18

9 Hitch & Reservoir Assembly Section 2: Frames Ref. Part No. Part Description Comments Revision Dwg D D D D H H C C C C C C C C C C C C C C C Image No. HITCH BUSHING BSHG 1 1/4ODX1 1/32IDX2 1/16LG PIN HTCH C2-C L HITCH SPACER WLDMT. PARKING STAND HITCH AND RESERVOIR WELD. DB GREASE ZERK STRAIGHT 1/4-28 DRAIN PLUG 3/4-16 UNF PLATED HHCS 3/8-16X1 GR5 RHSNB 5/16-18X3/4 GR5 HHCS 1-8X4 1/2 GR5 NUT HEX 1-8 NYLON INSERT PLT NUT HEX FLG TP LK 5/16-18ZNYCR WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT PIN LINCH 7/16 X 1 3/4 PIN HTCH DTNT.63X75 USBL COVER GASKET HRS VALVE 1 1/4FNPT BALL POLYPROP SMV MOUNTING SOCKET FILLER CAP W/STRAINER ASSY 07/10/18 DB(M)2660 Rotary Cutters P 9

10 Light Kit DB2660 Table of Contents Section 2: Frames DB(M)2660 Rotary Cutters P 07/10/18

11 Light Kit DB2660 Section 2: Frames Ref. Part No. Part Description Comments Revision Dwg L H C C C C C C C C C C J-37-R J-37-A J-AC1-15-B C J-37-R J-37-A J-AC1-15-B C C C Image No. DB26 LIGHT KIT * WELDED LIGHT BRACKET CABLE TIE.19X125 3DIA 50LB HHCS 1/4-20X1 GR5 NUT HEX 3/8-16 PLT NUT HEX NYLOCK 1/4-20 NUT HEX NYLOCK PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 6 1/32 X 7 HHCS #10-24X1 GR5 DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER ENHANCE MODULE LIGHT WIRE HARNESS 5' LEAD WIRE HARNESS 5' Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens 07/10/18 DB(M)2660 Rotary Cutters P 11

12 Weight Hangers Table of Contents Section 2: Frames DB(M)2660 Rotary Cutters P 07/10/18

13 Section 2: Frames Weight Hangers Table of Contents Ref. Part No. Part Description Comments Revision dwg A A A A A A H H H H H H D D D D D C C C C C C C C C C C C Drawing Image Number WEIGHT HANGER ASSY KUBOTA WEIGHT HANGER ASSY CASE/IH WEIGHT HANGER ASSY NH WEIGHT HANGER ASSY IH WEIGHT HANGER ASSY CASE WEIGHT HANGER ASSY JD WEIGHT HANGER JD WEIGHT HANGER CASE WEIGHT HANGER IH WEIGHT HANGER CASE/IH WEIGHT HANGER WELDMENT NH WEIGHT HANGER, KUBOTA WEIGHT RETAINER PIN LG WEIGHT RETAINER PIN C/IH LG WEIGHT BOX SPACER WEIGHT RETAINER PIN NH KUBOTA WEIGHT RETAINER HHCS 1/2-13X1 1/4 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 RHSNB 5/8-11X3 1/2 GR5 NUT LOCK 5/8-11 PLT NUT HEX NYLOCK 1/4-20 NUT HEX TOP LOCK 1/2-13 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 5/8 PLT PIN HAIR COTTER.120 PLT MANUAL STORAGE CONTAINER S/N S/N /10/18 DB(M)2660 Rotary Cutters P 13

14 Blade Drive Table of Contents Section 3: Deck DB(M)2660 Rotary Cutters P 07/10/18

15 Section 3: Deck Blade Drive Table of Contents Ref. Part No. Part Description Comments Revision Dwg H C C C C C C C C C C C C C Drawing Image Number CO NUT, CASTLE M30 X 2 CO COTTER PIN B6 X 60 CO BLANK WASHER DISHPAN WELDMENT SPCL-HUB HHCS 1/2-13X2 1/4 GR5 BLD BLT 1 1/8-12X44 W/.25KEY NUT HEX 1/2-13 PLT NUT HEX TOP LOCK 1 1/8-12 PLT NUT HEX FLANGE LOCK 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1" HARDENED HYD MOTOR ULTRA #3ML180A5792 EL 1 1/16MJIC 1 1/16MORB GASKET - MOTOR CUTTER BLADE 1/2X4X25 CW SPINDLE HUB ASSY HFS 5/8-11X2 GR8 07/10/18 DB(M)2660 Rotary Cutters P 15

16 Deck Link & Cylinder Section 3: Deck DB(M)2660 Rotary Cutters P 07/10/18

17 Deck Link & Cylinder Section 3: Deck Ref. Part No. Part Description Comments Revision dwg D H H H D D D D D D D C C C C C C C C C C C C C C C C C Drawing Image Number TRANSPORT CHAIN DB2660 DECK WELDMENT EXTENSION ARM LINK LINK PIVOT PIN BLADE BOLT ACCESS COVER NARROW DECK ANGLE LINKAGE TUBE RND 1 1/4X9/32WX06 DECK PIVOT PIN PIN CLVS 0X78 USBL GRS PIN CLVS 0X22 USBL GRS SKID SHOE GREASE ZERK 1/4-28 THD FORMING HHCS 3/8-16X1 1/4 GR5 HHCS 5/16-18X2 3/4 GR5 HHCS 5/8-11X2 3/4 GR5 PLOW 3/8-16X1 GR5 NUT LOCK 3/8-16 PLT NUT HEX FLG TP LK 5/16-18ZNYCR NUT HEX WHIZ 3/8-16 PLT NUT WING 3/8-16 PLT NUT HEX TOP LOCK 5/8-11 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 1 SAE PIN CLVS 0X75 USBL PIN COTTER 3/16 X 1 3/4 PLT CYL 3X12X25 ROD (TIE ROD) BUSHING CYL 1 1/4 X 1 X 1 07/10/18 DB(M)2660 Rotary Cutters P 17

18 Spindle Hub Assembly ( C) Section 3: Deck DB(M)2660 Rotary Cutters P 07/10/18

19 Spindle Hub Assembly ( C) Section 3: Deck Ref. Part No. Part Description Comments Revision Dwg C C Drawing Image Number CO NUT, CASTLE M30 X 2 CO BLANK WASHER CO SEAL RETAINER CO SEAL CO COTTER PIN B6 X 60 CO SPLINE SHAFT BRG CUP/CONE SET CO SPINDLE HOUSING CO OIL PLUG 3/8 CO BEARING RTA25 CO NUT LOCK M45 X 5 SPINDLE HUB ASSY 07/10/18 DB(M)2660 Rotary Cutters P 19

20 Guard: Front Rubber Section 4: Guards DB(M)2660 Rotary Cutters P 07/10/18

21 Guard: Front Rubber Section 4: Guards Ref. Part No. Part Description Comments Revision dwg A * D D C C C C Drawing Image Number FRONT RUBBER COMPLETE FLAT STRAP FLAT STRAP RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT RUBBER DEFLECTOR RUBBER DEFLECTOR 07/10/18 DB(M)2660 Rotary Cutters P 21

22 Guard: Front Single & Double Chain Section 4: Guards DB(M)2660 Rotary Cutters P 07/10/18

23 Guard: Front Single & Double Chain Section 4: Guards Ref. Part No. Part Description Comments Revision dwg A A * D D D D C C C C Drawing Image Number FRONT CHAIN GUARD COMPLETE FRONT DOUBLE CHAIN GUARD FRONT CHAIN GUARD BRKT. CTR. FRONT CHAIN GUARD BRKT. OUT. ROUND ROD.25 X ROUND ROD.25 X RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 3 LINK SINGLE CHAIN DOUBLE CHAN 07/10/18 DB(M)2660 Rotary Cutters P 23

24 Guard: Rear Rubber Section 4: Guards DB(M)2660 Rotary Cutters P 07/10/18

25 Guard: Rear Rubber Section 4: Guards Ref. Part No. Part Description Comments Revision dwg A * D D D D C C C C C C Drawing Image Number REAR RUBBER GUARD DEFLECTOR SPACER REAR RUBBER DEF. RCR15 & 1660 DEFLECTOR STRAP RCR15 & 1660 REAR GUARD BRACKET RHSNB 3/8-16X1 GR5 HHCS 3/8-16X1 GR5 RHSNB 3/8-16X1 1/2 GR5 RHSNB 3/8-16X3 1/2 GR5 NUT HEX WHIZ 3/8-16 PLT RUBBER DEFLECTOR RCR15 & /10/18 DB(M)2660 Rotary Cutters P 25

26 Guard: Rear Single & Double Chain S/N Section 4: Guards DB(M)2660 Rotary Cutters P 07/10/18

27 Guard: Rear Single & Double Chain S/N Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A A * D D D D C C C C C C Drawing Image Number REAR CHAIN GUARD REAR DOUBLE CHAIN GUARD DEFLECTOR SPACER REAR GUARD BRACKET REAR CHAINGUARD BRACKET CHAIN ROD 1/4 X 56 RHSNB 3/8-16X1 GR5 HHCS 3/8-16X1 GR5 RHSNB 3/8-16X3 1/2 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 3 LINK SINGLE CHAIN DOUBLE CHAIN 07/10/18 DB(M)2660 Rotary Cutters P 27

28 Guard: Rear Single & Double Chain S/N Section 4: Guards DB(M)2660 Rotary Cutters P 07/10/18

29 Guard: Rear Single & Double Chain S/N Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A A * D D D C C C C C Drawing Image Number REAR CHAIN GUARD REAR DOUBLE CHAIN GUARD DEFLECTOR SPACER REAR CHAINGUARD BRACKET CHAIN ROD 1/4 X 56 RHSNB 3/8-16X1 GR5 RHSNB 3/8-16X3 1/2 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 3 LINK Single chain Double chain Redesigned part 07/10/18 DB(M)2660 Rotary Cutters P 29

30 Cylinders & Hoses Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

31 Cylinders & Hoses Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C Drawing Image Number PIN CLVS 0X75 USBL PIN COTTER 3/16 X 1 3/4 PLT CYL 3X12X25 ROD (TIE ROD) CYL 2X32X25 - WELDED EL 9/16MJIC 9/16MORB OREL 1/16 9/16MJIC 9/16MORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 9/16FJIC HH3/8R /4MORB 9/16FJIC HH3/8R /4MORB 9/16FJIC HH3/8R /4MORB 9/16FJIC ORAD 1/16 9/16MORB 9/16MJIC 07/10/18 DB(M)2660 Rotary Cutters P 31

32 Deck Motor Hydraulics Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

33 Deck Motor Hydraulics Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg D D C C C C C C C C C C C C C C Drawing Image Number BUSH.54 OD X 0.36 ID X 3/4LG HYD HOSE CLAMP BRACKET HHCS 5/16-18X2 GR5 NUT HEX NYLOCK 5/16-18 PLT AD 9/16MJIC 3/4MORB EL 9/16MJIC 9/16FJIC AD 9/16MORB 9/16MJIC EL 1 1/16MJIC 1 1/16MORB HH3/8R /16FJIC AD 9/16MJIC BLKHD WITH LN AD BKHD 1 1/16MJIC NUT LOCK 1 1/16-12 BULKHEAD HH3/4R FJIC 2-90 HH3/4R FJIC 2-90 HH3/8R /16FJIC TUFF COAT HH3/4R FJIC 07/10/18 DB(M)2660 Rotary Cutters P 33

34 Hydraulic Cylinder ( C) Lion Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

35 Hydraulic Cylinder ( C) Lion Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision Dwg C C C N/A N/A N/A N/A N/A N/A C Drawing Image Number CYL 3X12X25 ROD (TIE ROD) * NUT HEX 1/2-13 PLT MON PISTON NUT SCREW SET SH 3/8-16X3/8 TYPE C PLUG 9/16-18UNF MORB SOCKET HD MON ROD SEAL MON PISTON SEAL (PSP) MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING MON PISTON 00-0-TSS-ISO-WR MON CYL TUBE MON TIE ROD LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 0-9/16 ORB MON ROD CAP /16ORBTS MON CYL ROD MON SEAL KIT Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 07/10/18 DB(M)2660 Rotary Cutters P 35

36 Hydraulic Cylinder ( C) Lion Section 5: Hydraulics & Cylinders No diagram associated with this Parts List 36 DB(M)2660 Rotary Cutters P 07/10/18

37 Hydraulic Cylinder ( C) Lion Section 5: Hydraulics & Cylinders No Parts List associated with this diagram 07/10/18 DB(M)2660 Rotary Cutters P 37

38 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

39 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision Dwg C Image No. GEARBOX FR3 1:2 SPEEDUP BONDIOLI BONDI SHAFT BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 RPBY BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI PIN, 6X10 UNI 1707 BONDI OIL PLUG, VENT BONDI OIL PLUG BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL SEAL 19X13X3 07/10/18 DB(M)2660 Rotary Cutters P 39

40 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

41 Hydraulic Gear Increaser 1000 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision Dwg C Image No. GEARBOX FR3 1:18 SPEEDUP BONDIOLI BONDI SHAFT 1-3/8 Z21 BONDI SLEEVE BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI CIRCLIP DIA 50E BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 RPBY BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI SPRING BONDI BALL 1/2" BONDI PIN, 6X10 UNI 1707 BONDI OIL SEAL 19X13X3 BONDI OIL PLUG 3/8" GAS BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL PLUG, VENT 07/10/18 DB(M)2660 Rotary Cutters P 41

42 Hydraulic Gear Increaser 1000 RPM ( C) Comer Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

43 Hydraulic Gear Increaser 1000 RPM ( C) Comer Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision Dwg C Image No. GEARBOX FR3 1:18 SPEEDUP COMER CO INPUT HOUSING CO BEARING 6009 COMER HEX NUT M8 UNI CO BOLT M8X25 8,8 CO METAL BREATHER 3/8 G CO BOLT WASHER 17X22X5 CO OIL SEAL 45X65X8 CO PINION (1000 RPM) CO OIL SEAL 50X68X8 CO OIL SEAL PLUG 40 X 7 CO SPACER RPBY C CO COVER CO SPRING 6X12UNII707 CO MAGNETIC PLUG 3/8 G NA36/A CO RING GEAR (1000 RPM) CO OIL FILLER PLUG TSN 3/8" CO SHAFT CO PARALLEL KEY B 12X8X20 CO EXTERNAL SNAP RING 48 CO BALL 3/8 9,52MM CO RETAINING RING CO SPRING 50.5X /10/18 DB(M)2660 Rotary Cutters P 43

44 Hydraulic Gear Increaser 540 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

45 Hydraulic Gear Increaser 540 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg C Drawing Image Number GEARBOX FR3 1:7 SPEED UP * BONDI SHAFT BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 CO BALL BRG X75X16 BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI PIN, 6X10 UNI 1707 BONDI OIL PLUG BONDI OIL PLUG BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL SEAL 19X13X3 07/10/18 DB(M)2660 Rotary Cutters P 45

46 Hydraulic Gear Increaser 540 RPM ( C) Comer Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

47 Hydraulic Gear Increaser 540 RPM ( C) Comer Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg C Drawing Image Number GEARBOX FR3 1:7 SPEED UP CO INPUT HOUSING NUT, M8 UNI 5588 A6S MEDIUM CO MAGNETIC PLUG 3/8 G NA36/A CO SEAL, OIL 50X68X8 DIN3760 CO BALL BEARING X80X16 CO INPUT SHAFT CO STEEL KEY 12 X 8 X 20 CO RING GEAR 60T M=75R1:75 CO SPACER CO CYLINDRIC PIN 6X12 UNI 1707 CO COVER CO V.T.C.E.I. M8X25 UNI5931-8G CO OIL SEAL 45X65X8 DIN 3760 CO BALL BEARING X75X16 C0 PINION 16T M=75 CO OIL SEAL PLUG 40 X 7 CO METAL BREATHER 3/8 G CO OIL DRAIN PLUG 3/8 G AVP * Notes: Oil Type 80-90W Capacity 1 Pints 07/10/18 DB(M)2660 Rotary Cutters P 47

48 Hydraulic Gear Increaser 540 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

49 Hydraulic Gear Increaser 540 RPM ( C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision Dwg C Image No. GEARBOX FR3 1:75 SPEEDUP BONDIOLI BONDI SHAFT BONDI SLEEVE BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI CIRCLIP DIA 50E BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 RPBY BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI SPRING BONDI BALL 1/2" BONDI PIN, 6X10 UNI 1707 BONDI OIL SEAL 19X13X3 BONDI OIL PLUG 3/8" GAS BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL PLUG, VENT 07/10/18 DB(M)2660 Rotary Cutters P 49

50 Hydraulic Gear Increaser 540 RPM ( C) Comer Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

51 Hydraulic Gear Increaser 540 RPM ( C) Comer Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision Dwg C Image No. GEARBOX FR3 1:75 SPEEDUP CO INPUT HOUSING CO BEARING 6009 COMER HEX NUT M8 UNI CO BOLT M8X25 8,8 CO METAL BREATHER 3/8 G CO BOLT WASHER 17X22X5 CO OIL SEAL 45X65X8 CO PINION (1000 RPM) CO OIL SEAL 50X68X8 CO OIL SEAL PLUG 40 X 7 CO SPACER RPBY C CO COVER CO SPRING 6X12UNII707 CO MAGNETIC PLUG 3/8 G NA36/A CO RING GEAR (1000 RPM) CO OIL FILLER PLUG TSN 3/8" CO SHAFT CO PARALLEL KEY B 12X8X20 CO EXTERNAL SNAP RING 48 CO BALL 3/8 9,52MM CO RETAINING RING CO SPRING 50.5X /10/18 DB(M)2660 Rotary Cutters P 51

52 Hydraulic Motor Ultra ( C) Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

53 Hydraulic Motor Ultra ( C) Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg C N0 Drawing Image Number HYD MOTOR ULTRA #3ML180A5792 BODY O-RING BACK-UP RING BACK-UP SEAL LOBE SEAL SHAFT SEAL FED. MOGUL SEAL 25X756X.25 CIRCLE CLIP ULTRA MOTOR SEAL KIT Not sold separately Not sold separately Not sold separately Not sold separately Not sold separately Alternate replacement seal Not sold separately Includes one of items 5 & 6 and two of items 1 through 4 07/10/18 DB(M)2660 Rotary Cutters P 53

54 Hydraulic Pump Ultra ( C) Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

55 Hydraulic Pump Ultra ( C) Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg C N D D T4N Drawing Image Number HYD PUMP ULTRA #2PR029C4599W SEAL ENERGIZER SEAL ELEMENT BODY O-RING CIRCLE CLIP WOODRUFF KEY ULTRA PUMP SEAL KIT WASHER LOCK M14 (DIN 127B) PLT NUT JAM M14X5 DIN 936 PLT ULTRA PUMP SEAL KIT,KEY,LN, LW Not Sold Separately Not Sold Separately Not Sold Separately Not Sold Separately Not Sold Separately Includes one of items 3, 4 & 5 and two of items 1 & 2 Includes 1 ea. 5,6,7 & 8 07/10/18 DB(M)2660 Rotary Cutters P 55

56 Speed Increaser: Ditch Bank Mount Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

57 Speed Increaser: Ditch Bank Mount Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg A A * C C C C C C C C C C C C C C C C C C C C C C C C Drawing Image Number DB MNT 540 SPD INC W/PUMP/PTO DB MNT 1000 SPD INC W/PUMP/PTO HHCS M12X75X30 GR8.8 HSHCS M10X5X40 GR8.8 WASHER LOCK SPRING 1/2 PLT WASHER LOCK M10 BLK HYD PUMP ULTRA #2PR029C4599W 3250 PRESSURE RELIEF VALVE PRESS. GAUGE SERVICE FILTER AD 1 1/16MORB 1 1/16MJIC AD 1 5/8MJIC 1 1/4MNPT AD 1 1/16MORB 1 1/16MORB AD 1 1/16MJIC 1 5/16MORB GEARBOX FR3 1:7 SPEED UP GEARBOX FR3 1:2 SPEEDUP GEAR 35 X 31 Z 18 SPLINE DRVLN CAT4 38-6X38-6 NO C DRVLN CAT X38-6 NO C EL 1 5/8-12MJIC 1 5/16MORB HH1 1/4R /8FJIC 1-90 TEE 06FJIC 06MJIC 06MJIC EL 1 1/16MJIC 1 1/16 FJIC SWPT HH3/4R1 1 1/16FJIC HH3/4R FJIC SPIN-ON RETURN FILTER 1 1/2-16 SPIN-ON FILTER HEAD 1 5/ RPM 1000 RPM 540 RPM 1000 RPM 540 RPM 1000 RPM 07/10/18 DB(M)2660 Rotary Cutters P 57

58 Speed Increaser: Tractor Mount Section 5: Hydraulics & Cylinders DB(M)2660 Rotary Cutters P 07/10/18

59 Speed Increaser: Tractor Mount Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision dwg A A * D D C C C C C C C C C C C C C C C C C C C C C C C C C Drawing Image Number TRACT0R MT 540 SPD INC W/PUMP TRACTOR MT 1000 SPD INC W/PUMP SPEED INCREASER MOUNTING PLATE CHAIN, PUMP TORQUE S-HOOK # X 00 HHCS 3/8-16X1 1/4 GR5 HHCS M12X75X30 GR8.8 HSHCS M10X5X40 GR8.8 NUT LOCK 3/8-16 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK M10 BLK HYD PUMP ULTRA #2PR029C4599W 3250 PRESSURE RELIEF VALVE PRESS. GAUGE SERVICE FILTER AD 1 1/16MORB 1 1/16MORB EL 1 1/16MJIC 1 1/16MORB AD 1 1/16MJIC 1 5/16MORB GEAR 35 X 31 Z 18 SPLINE GEARBOX FR3 1:75 SPEEDUP GEARBOX FR3 1:18 SPEEDUP TEE 06FJIC 06MJIC 06MJIC HH3/4R FJIC06FJIC90 HH3/4R FJIC HH1 1/4R FJIC 1-90 AD 1 5/8MJIC 1 5/16MORB EL 1 5/8MJIC 1 1/4MNPT SPIN-ON RETURN FILTER 1 1/2-16 SPIN-ON FILTER HEAD 1 5/ RPM 1000 RPM 540 RPM 1000 RPM 07/10/18 DB(M)2660 Rotary Cutters P 59

60 Driveline 1000 ( C) Comer Section 6: Drivelines DB(M)2660 Rotary Cutters P 07/10/18

61 Driveline 1000 ( C) Comer Section 6: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN CAT X38-6 NO C CO COMPLETE COLLAR YOKE C13 COMER CROSS JOURNAL SET RPBY COMER OUTER YOKE COMER ROLL PIN, INNER TUBE CO BUSH WITH GREASE FITTING CO COMPLETE OUTER TUBE COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE CO INNER YOKE CO COMPLETE COLLAR YOKE C12 CO GUARD RETAIN. COLLAR O.T. COMER BOLT CO GUARD RETAIN. COLLAR I.T. CO SAFTEY CHAINS CO COMPLETE GUARD W/MANUAL COMER OUTER CIRCLIP COMER SLIDING SLEEVE COLLER COMER SPRING COMER FIXED SLEEVE COMER BALL 1/2" N/A N/A CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARD COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER COLLAR KIT 1 3/8 YOKE CO LABEL W/CUSTOMER CODE (S/N ) 07/10/18 DB(M)2660 Rotary Cutters P 61

62 Driveline 540 ( C) Comer Section 6: Drivelines DB(M)2660 Rotary Cutters P 07/10/18

63 Driveline 540 ( C) Comer Section 6: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN CAT4 38-6X38-6 NO C CO COMPLETE COLLAR YOKE C12 COMER CROSS JOURNAL SET RPBY COMER OUTER YOKE COMER ROLL PIN, INNER TUBE CO BUSH WITH GREASE FITTING CO COMPLETE OUTER TUBE COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE CO INNER YOKE CO GUARD RETAIN. COLLAR O.T. COMER BOLT CO GUARD RETAIN. COLLAR I.T. CO SAFTEY CHAINS CO COMPLETE GUARD W/MANUAL COMER OUTER CIRCLIP COMER SLIDING SLEEVE COLLER COMER SPRING COMER FIXED SLEEVE COMER BALL 1/2" N/A N/A CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARD COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER COLLAR KIT 1 3/8 YOKE CO LABEL W/CUSTOMER CODE (S/N ) 07/10/18 DB(M)2660 Rotary Cutters P 63

64 Gauge Wheel Components: Side Wheel Section 7: Options & Accessories DB(M)2660 Rotary Cutters P 07/10/18

65 Gauge Wheel Components: Side Wheel Section 7: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A H H H C C C C C C C C C C Image No. SIDE GAUGE WHEEL * SIDE GUAGE WHEEL FRONT MOUNT SIDE GAUGE WHEEL REAR MOUNT SIDE GUAGE WHEEL FRAME HHCS 1/2-13X1 3/4 GR5 HHCS 3/4-10X7 1/2 GR5 HHCS 1/2-13X1 3/8 GR5 BLK NUT LOCK 1/2-13 PLT NUT LOCK 3/4-10 PLT NUT HEX FLG/LK 1/2-20 PLT GR G WASHER FLAT 1/2 SAE PLT WASHER FLAT 1/2 USS PLT TIRE & WHEEL LAMINATED 0 X 8 HUB & SPINDLE ASSY 4 BOLT 07/10/18 DB(M)2660 Rotary Cutters P 65

66 Gauge Wheel Components: Tail Wheel Section 7: Options & Accessories DB(M)2660 Rotary Cutters P 07/10/18

67 Gauge Wheel Components: Tail Wheel Section 7: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A H H H C C C C C C C C C C C C C C C C C C C C Image No. TAILWHEEL - 60 DECK BOOM ARM TAILWHEEL PIVOT TAILWHEEL ADJUSTMENT TAILWHEEL BEAM WLDMT SHORT GREASE ZERK 1/4-28 THD FORMING HHCS 1/2-13X3 1/2 GR5 HHCS 5/8-11X3 1/2 GR5 RHSNB 1/2-13X1 1/4 GR5 HHCS 3/4-10X7 1/2 GR5 HHCS 1/2-20X1 1/4 GR5 HHCS 1/2-13X1 3/8 GR5 BLK NUT LOCK 1/2-13 PLT NUT LOCK 3/4-10 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX TOP LOCK 5/8-11 PLT NUT HEX FLG/LK 1/2-20 PLT GR G WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT WASHER MACH 25 X 50 X 14GA PIN ROLL 3/8 X 2 1/2 PLT TIRE & WHEEL LAMINATED 0 X 8 LAM 4X8 TR-WL-HUB-YOKE 25 SER. HUB & SPINDLE ASSY 4 BOLT RC25 TAILWHEEL YOKE, 5 SHAFT 07/10/18 DB(M)2660 Rotary Cutters P 67

68 Hub Assembly 4-Bolt W/ Zerk & Studs ( C) Section 7: Options & Accessories DB(M)2660 Rotary Cutters P 07/10/18

69 Hub Assembly 4-Bolt W/ Zerk & Studs ( C) Section 7: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C Image No. GREASE ZERK STRAIGHT 1/4-28 HUB STUD 1/2-20X1 5/8 GR5 NUT HEX 1 1/4-7(MACHINED)PLAIN HUB & SPINDLE ASSY 4 BOLT HUB 4 BLT W/CUPS, ZERK & STUDS HUB 4BLT DUCTILE(USE C) OIL SEAL DBL LIP 441 BORE BRG 25ID CONE BRG CUP 44OD BUSHING TW 25ODX.78IDX5 1/4 07/10/18 DB(M)2660 Rotary Cutters P 69

70 SMV Sign Table of Contents Section 7: Options & Accessories DB(M)2660 Rotary Cutters P 07/10/18

71 Section 7: Options & Accessories SMV Sign Table of Contents Ref. Part No. Part Description Comments Revision Dwg S C C C C Image No. SMV SIGN * HFSS 1/4-20X1/2 GR5 NUT HEX FLANGE 1/4-20 PLT DECAL SLOW MOVING-GALV. BACKED SMV MOUNTING BLADE 07/10/18 DB(M)2660 Rotary Cutters P 71

72 Decal Placement Table of Contents Section 8: Decals DB(M)2660 Rotary Cutters P 07/10/18

73 Decal Placement Section 8: Decals Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Drawing Image Number DECAL WARNING PINCH PT/CRUSH DECAL CAUTION 540 RPM DECAL DANGER PTO DRIVELINE EN DECAL FLAG DECAL WARNING HIGH PRESSUR SML DECAL GREASE 10 HRS LH DECAL - IMPORTANT, OPEN VALVE DECAL - OIL FILL LINE DECAL - WARNING SIDEMOUNT DECAL - WARNING TRACTOR ANGLE DECAL GREASE 10 HRS RH DECAL LIFT POINT DECAL WARNING GEN SAFE MOWER RPBY C DECAL DANGER ROTATE BLADE DECAL DANGER THROWN OBJ CUTTER DECAL DANGER ROTATE BLADE RPBY C DECAL NOTICE - 20 MPH MAX DECAL SAFETY COMBO SUNWEST DECAL WARNING HIGH PRESSURE RPBY C DECAL LP 16" W/TREE BROWN/GOLD RPBY C DECAL LANDPRIDE 16" BROWN/GOLD DECAL 2 YEAR GEARBOX WARRANTY DECAL QUICK HITCH SYSTEM DECAL REFLECTOR RED 2X9 DECAL REFLECTOR AMBER 2X9 DECAL GREASE EVERY 10HRS MULTI DECAL DB GOLD RPBY C DECAL DBM GOLD RPBY C S/N + S/N - (Obsolete) Obsolete BEIGE UNIT ORANGE UNIT BEIGE UNIT ORANGE UNIT Obsolete Obsolete 07/10/18 DB(M)2660 Rotary Cutters P 73

74 Touch-up Paints Section 8: Decals No diagram associated with this Parts List 74 DB(M)2660 Rotary Cutters P 07/10/18

75 Touch-up Paints Section 8: Decals Ref. Part No. Part Description Comments Revision C C C C C C C CTU CTU CTU CTU CTU CTU CTU CQT CQT CQT CQT CQT CQT CQT CGL CGL CGL CGL CGL CGL CGL LP BEIGE SPRAY CAN GLOSS BLACK SPRAY CAN MED. RED SPRAY TRCK/CTR GREEN SPRAY CUTTERS ORANGE SPRAY CAN BLUE SPRAY CAN PAINT ALUMINUM/ZINC SPRAY CAN LP BEIGE TOUCH-UP 5OZ GLOSS BLACK TOUCH-UP 5OZ MED RED TOUCH-UP 5OZ GREEN TOUCH-UP 5OZ ORANGE TOUCH-UP 5OZ BLUE TOUCH-UP 5OZ PAINT ALUMINUM/ZINC TOUCH UP LP BEIGE QUART GLOSS BLACK QUART MED RED QUART GREEN QUART ORANGE QUART BLUE QUART PAINT ALUMINUM/ZINC QUART LP BEIGE GALLON GLOSS BLACK GALLON MED RED GALLON GREEN GALLON ORANGE GALLON BLUE GALLON PAINT ALUMINUM/ZINC GALLON Spray can Spray can Spray can Spray can Spray can Spray can Spray can Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Quart can Quart can Quart can Quart can Quart can Quart can Quart can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can 07/10/18 DB(M)2660 Rotary Cutters P 75

76 The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page *... 11, 21, 23, 25, 27, 29, 35, 45, 47, 57, 59, 65, , , , 47, , 47, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 41, 45, , 41, 45, , , , 41, D D A A D...25, 27, D D D D D D H H H H H H A A A A A H A H H H A D H A D D H H D H H A H H A...27, A A A A H A...27, A S D L H D D D D D D D D D...25, D...27, D...27, D D D D D D D H D N , , , , , , , , , , , , , C...9, C C C...7, 17, C C C C C...21, 23, 25, 27, C...9, 25, C C C C...17, C C C C C C C C C C C C C...65, C C C C C...57, C...57, C C...25, 27, C...65, , C C...17, C C...65, C...15, C C...65, C C C...13, C C...9, C... 17, 21, 23, 25, 27, C C C...11, C C C...17, C C...65, C C...11, C...9, 17, C...9, 11, C...15, 57, 59, C...65, C C C C C C...57, C C...17, C...17, C C C C , 41, 45, , 41, 45, C , 41, 45, C...55, 57, C...57, C...57, C...17, 31, C...15, C C C C C C C C C C C...57, C...15, 33, C...57, C , 41, 45, C...65, C C...65, 67, C C C C C C C C DB(M)2660 Rotary Cutters P 07/10/18

77 (continued) Part Number Page Part Number Page Part Number Page C C C C C C C C C C C C C C C C C C C C C C C C C C , 41, , 41, 45, C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C C C , 41, 45, C...45, 47, C...57, C...15, C...39, C...41, 43, C...49, 51, C...57, C...57, C C , C C C C C C C C C C C C...57, C C C C C C C C C C C C C C C...33, C C C , , 41, 45, C C C C , 41, 45, , , , 41, 45, , 41, 45, , 41, 45, , 41, 45, , 41, 45, N T4N C C C C...23, 27, C C...57, C...57, C...23, 27, C C C C C C C , , D D , , 47, Dwg Dwg Dwg Dwg Dwg , 29 Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg J-37-A...11 J-37-R...11 J-AC1-15-B...11 N/A...35, 61, 63 07/10/18 DB(M)2660 Rotary Cutters P 77

78 Great Plains Manufacturing, Inc. Corporate Office: P.O. Box 5060 Salina, Kansas USA