Rotary Cutter RC(M) P Parts Manual. Copyright 2018 Printed 07/10/18

Transcription

1 Rotary Cutter RC(M) P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2018 Printed 07/10/18 Cover photo may show optional equipment not supplied with standard unit.

2 Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Decks & Hitches...6 Deck Center Components...6 Deck Center Drive Components...8 Deck Wing Components...10 Deck Wing Drive Components...12 Hitch A-Frame...14 Hitch Ball Coupler...16 Hitch Bar Tite...18 Hitch LP Performance...20 Hitch Pintle...22 Hitch Standard Pivoting Clevis...24 Leveling Rod...26 Lights 5 Inch (LED)...28 Section 3: Axles...30 Axle Center...30 Axle Wing...32 Hub Assembly ( K)...34 Tire Options...36 Section 4: Guards...38 Guards Chain Double Row Front...38 Guards Chain Double Row Rear...40 Guards Chain Single Row Front...42 Guards Chain Single Row Rear...44 Section 5: Drivelines...46 Driveline Center ( C) Comer...46 Driveline Conv RPM ( C) Walterscheid...48 Driveline Conv. 540 RPM ( C) Walterscheid...50 Driveline CV RPM ( C) Weasler...52 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...54 Driveline CV RPM ( C)...56 Driveline CV 540 RPM ( C) Weasler...58 Driveline Wing ( C) Comer...60 Section 6: Gearboxes...62 Divider Box 1000 RPM 35:1 ( C)...62 Divider Box 540 RPM 1:35 ( C)...64 Gearbox ( C)...66 Gearbox ( C)...68 Gearbox 1000 RPM ( C) Comer...70 Gearbox 540 RPM ( C)...72 Section 7: Hydraulics...74 Hydraulic Cylinder ( C) (Red Lion)...74 Hydraulic Cylinder ( C) Red Lion...76 Hydraulic Cylinder Plumbing Components...78 Hydraulic Cylinder Rephase ( C) 3X...80 Hydraulic Cylinder Rephase ( C) Red Lion 25 X...82 Hydraulic Cylinder Wing Deck ( C) Cross...84 Hydraulic Cylinder Wing Deck ( C) Midway...86 Hydraulic Cylinders W/ Mounting Components...88 Section 8: Options & Accessories...90 Blade Carrier Components...90 Blade Carrier Options...92 Lights 5 Inch (LED)...94 Shredder Blades...96 Section 9: Decals...98 Decals...98 Touch-up Paints Copyright 201 All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 RC(M)4620 Rotary Cutter P 07/10/18

3 Alphabetized Table of Contents A B D G H L Axle Center...30 Axle Wing...32 Blade Carrier Components...90 Blade Carrier Options...92 Decals...98 Deck Center Components...6 Deck Center Drive Components...8 Deck Wing Components...10 Deck Wing Drive Components...12 Divider Box 1000 RPM 35:1 ( C)...62 Divider Box 540 RPM 1:35 ( C)...64 Driveline Center ( C) Comer...46 Driveline Conv RPM ( C) Walterscheid...48 Driveline Conv. 540 RPM ( C) Walterscheid...50 Driveline CV RPM ( C) Weasler...52 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...54 Driveline CV RPM ( C)...56 Driveline CV 540 RPM ( C) Weasler...58 Driveline Wing ( C) Comer...60 Gearbox ( C)...66 Gearbox ( C)...68 Gearbox 1000 RPM ( C) Comer...70 Gearbox 540 RPM ( C)...72 Guards Chain Double Row Front...38 Guards Chain Double Row Rear...40 Guards Chain Single Row Front...42 Guards Chain Single Row Rear...44 Hitch A-Frame...14 Hitch Ball Coupler...16 Hitch Bar Tite...18 Hitch LP Performance...20 Hitch Pintle...22 Hitch Standard Pivoting Clevis...24 Hub Assembly ( K)...34 Hydraulic Cylinder ( C) (Red Lion)...74 Hydraulic Cylinder ( C) Red Lion...76 Hydraulic Cylinder Plumbing Components...78 Hydraulic Cylinder Rephase ( C) 3X...80 Hydraulic Cylinder Rephase ( C) Red Lion 25 X...82 Hydraulic Cylinder Wing Deck ( C) Cross...84 Hydraulic Cylinder Wing Deck ( C) Midway...86 Hydraulic Cylinders W/ Mounting Components...88 Touch-up Paints Leveling Rod...26 S T Lights 5 Inch (LED)...28 Lights 5 Inch (LED)...94 Shredder Blades...96 Tire Options /10/18 RC(M)4620 Rotary Cutter P 3

4 4 RC(M)4620 Rotary Cutter P 07/10/18

5 07/10/18 RC(M)4620 Rotary Cutter P 5

6 Deck Center Components Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

7 Deck Center Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg S H H H H H H H H H H H H C C C C C C C C C C C C C C C C C C Image No. MANUAL STORAGE CONTAINER KIT SPRING TRUNNION SKID SHOE DECK CENTER W/O DR DECK CENTER W/O DR GREEN DECK CENTER W/O DR ORANGE DECK CENTER W/O DR RED DECK CENTER W/O DR YELLOW DECK CENTER W/ DR DECK CENTER W/ DR GREEN DECK CENTER W/ DR ORANGE DECK CENTER W/ DR RED DECK CENTER W/ DR YELLOW HHCS 1/4-20X1 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1-8X9 1/2 GR5 HHCS 1/2-13X7 1/2 GR5 HFS 1/2-13X2 GR8 NUT HEX WHIZ 1/2-13 PLT NUT HEX NYLOCK 1/2-13 NUT HEX TOP LOCK 1-8 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 1/2 PLT PIN CLVS 0X69 USBL SPRING HOSE LOOP HEAVY SPRING COMP 20OD.63W 5.5L MANUAL STORAGE CONTAINER PLUG LP 3" ID RUBBER Beige Green Orange Red Yellow Beige Green Orange Red Yellow 07/10/18 RC(M)4620 Rotary Cutter P 7

8 Deck Center Drive Components Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

9 Deck Center Drive Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg H D D H D C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. WLDMT. SHAFT PROTECTOR SHIELD, FRONT HALF BRKT, SHIELD MOUNT SHIELD, REAR HALF SHIELD LOCK BRKT HHCS 5/16-18X3/4 GR5 HHCS 3/4-10X2 1/4 GR5 HHCS M8X25X20 GR8 HHCS 3/8-16X8 GR5 ZNYCR NUT HEX FLG TP LK 5/16-18ZNYCR NUT FLANGE LOCK 3/8-16 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 5/16 SAE PLT SPRING HOSE LOOP KNOB 3/8-16 FEMALE THD 2 3/8OD GBOX RC50 1:46 REV GBOX RCM50 21:1 REV COMER U DIPSTICK DRVLN C FX CLTCH DRVLN C CV DRVLN C QD DRVLN C CV ORCLTCH DRVLN C CV DRVLN C CV DRVLN C QD DIV BOX 540RPM 1:35 DIV BOX 1000RPM 35:1 DRIVELINE SHIELD CONE, 2 PIECE EA DRVLN SHLD CONE, 2 PIECE LONG HHCS M8X25X20 GR8 THD-LCK Used only with RC RPM 1000 RPM 540 RPM 540 RPM 1000 RPM 1000 RPM 1000 RPM 1000 RPM 540 RPM 1000 RPM Used only with driveline C 07/10/18 RC(M)4620 Rotary Cutter P 9

10 Deck Wing Components Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

11 Deck Wing Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D D D D H H L H D H H H H H H H H H H H H H H H H H H H H H C C C C C C C C C C C C Image No. DEFLECTOR INNER RH DEFLECTOR INNER LH DEFLECTOR OUTER RH DEFLECTOR OUTER LH MOUNT REPH CYL ADJ RH MOUNT REPH CYL ADJ LH ASSY HINGE ROD HINGE ROD WING SKID SHOE HARDENED WING SKID SHOE DECK WING RH W/O DR DECK WING RH W/O DR GREEN DECK WING RH W/O DR ORANGE DECK WING RH W/O DR RED DECK WING RH W/O DR YELLOW DECK WING RH W/ DR DECK WING RH W/ DR GREEN DECK WING RH W/ DR ORANGE DECK WING RH W/ DR RED DECK WING RH W/ DR YELLOW DECK WING LH W/O DR DECK WING LH W/O DR GREEN DECK WING LH W/O DR ORANGE DECK WING LH W/O DR RED DECK WING LH W/O DR YELLOW DECK WING LH W/ DR DECK WING LH W/ DR GREEN DECK WING LH W/ DR ORANGE DECK WING LH W/ DR RED DECK WING LH W/ DR YELLOW GREASE ZERK STRAIGHT 1/4-28 HHCS 3/8-16X1 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 PLOW 3/8-16X1 1/4 GR5 EYE BOLT 1-8X7 1/2 LG PLT SP NUT HEX JAM 1-8 PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX TOP LOCK 3/8-16 PLT NUT HEX WHIZ 3/8-16 PLT WASHER LOCK SPRING 1 PLT PLUG LP 3" ID RUBBER Right wing Left wing Right wing Left wing Right wing Left Wing Beige Green Orange Red Yellow Beige Green Orange Red Yellow Beige Green Orange Red Yellow Beige Green Orange Red Yellow 07/10/18 RC(M)4620 Rotary Cutter P 11

12 Deck Wing Drive Components Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

13 Deck Wing Drive Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C Image No. HHCS 3/4-10X2 1/4 GR5 NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT COMER U DIPSTICK DRVLN C FX CLTCH GBOX RC50 1:1 STD GBOX RC50 1:1 REV DRIVELINE SHIELD CONE, 2 PIECE HHCS M8X25X20 GR8 THD-LCK Left & Right wing Right wing Left wing 07/10/18 RC(M)4620 Rotary Cutter P 13

14 Hitch A-Frame Table of Contents Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

15 Section 2: Decks & Hitches Hitch A-Frame Table of Contents Ref. Part No. Part Description Comments Revision Dwg D D D H H C C C C C C C C C C C C C C C C C C C N\A C Image No. PTO HANGER BUSHING PTO HANGER STOP PTO HANGER ADJUSTABLE JACK MOUNT HITCH W/ ADJ JACK MNT GREASE ZERK STRAIGHT 1/4-28 HHCS 1-8X2 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 HHCS 3/8-16X2 GR5 RHSNB 3/8-16X1 1/4 GR5 NUT LOCK 3/8-16 PLT NUT HEX 3/8-16 PLT NUT HEX 1/2-13 PLT NUT HEX 1-8 PLT NUT HEX TOP LOCK 1-8 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 USS PLT WASHER FLAT 1 SAE PIN ROLL 3/8 X 2 PLT PIN 0 X 62 USBL HRDN SAFETY CHAIN LB SIDEWIND JACK 7000 LB Available with sidewind jack 07/10/18 RC(M)4620 Rotary Cutter P 15

16 Hitch Ball Coupler Table of Contents Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

17 Hitch Ball Coupler Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H C C Drawing Image Number 2 5/16" BALL HITCH ASSEMBLY * 2 5/16" BALL HITCH WELDMENT HHCS 5/8-11X1 3/4 GR5 NUT HEX WHIZ 5/8-11 PLT For 2-5/16" Ball 07/10/18 RC(M)4620 Rotary Cutter P 17

18 Hitch Bar Tite Table of Contents Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

19 Section 2: Decks & Hitches Hitch Bar Tite Table of Contents Ref. Part No. Part Description Comments Revision Dwg A H H H D D H C C C C C C C C C C C C C C C K Drawing Image Number BAR TITE HITCH * SHAFT WELDMENT WELDMENT HITCH CLEVIS SWIVEL RECEIVER HITCH WEAR PLATE WIDE FORMED HITCH SUPPORT WIDE BAR TITE WIDE TOP GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 3/4-10X6 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X5 1/2 GR5 NUT HEX TOP LOCK 1-8 PLT NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT WASHER FLAT 50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 50ODX00IDX25 BAR TITE HITCH WIDE 07/10/18 RC(M)4620 Rotary Cutter P 19

20 Hitch LP Performance Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

21 Hitch LP Performance Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A * H D H H C C C C C C C C C C C C C Image No. LP PERFORMANCE HITCH SWIVEL RECEIVER HITCH HOLDER HITCH CLEVIS HITCH YOKE GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X7 GR5 HHCS 3/8-16X1 1/4 GR5 NUT HEX COUPLER 3/8-16X1 3/4 NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1 1/4X1X1/2 HRD BUSHING 1 1/4X1X5/8 07/10/18 RC(M)4620 Rotary Cutter P 21

22 Hitch Pintle Table of Contents Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

23 Section 2: Decks & Hitches Hitch Pintle Table of Contents Ref. Part No. Part Description Comments Revision Dwg A H L H H C C C C C C C C C C Drawing Image Number PINTLE HITCH * WLDMT. CLEVIS LEVEL ROD ASSY. LEVEL ROD CLEVIS WLDMT. PINTLE HITCH CLEVIS YOKE HITCH HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR8 SPTHD HFS 5/8-11X2 1/2 GR8 PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 PINTLE HOOK SQ.BASE BDB /10/18 RC(M)4620 Rotary Cutter P 23

24 Hitch Standard Pivoting Clevis Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

25 Hitch Standard Pivoting Clevis Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H H L H C C C C C C C Drawing Image Number STANDARD HITCH * WLDMT. TONGUE CLEVIS WLDMT. CLEVIS LEVEL ROD ASSY. LEVEL ROD CLEVIS YOKE HITCH HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR8 SPTHD NUT HEX WHIZ 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 07/10/18 RC(M)4620 Rotary Cutter P 25

26 Leveling Rod Table of Contents Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

27 Section 2: Decks & Hitches Leveling Rod Table of Contents Ref. Part No. Part Description Comments Revision Dwg H K H C C C C C Image No. WLDMT. LEVEL ROD SHORT LEVEL ROD ASSY LEVEL ROD LONG NUT HEX JAM 7/8-9 NUT HEX COUPLER 7/8-9X5 WASHER FLAT 3/4 SAE PLT PIN CLVS.75X50 USBL HT PIN COTTER 1/8 X 1 1/4 PLT 07/10/18 RC(M)4620 Rotary Cutter P 27

28 Lights 5 Inch (LED) Section 2: Decks & Hitches RC(M)4620 Rotary Cutter P 07/10/18

29 Lights 5 Inch (LED) Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A S S D C C C C C C D C C D C C C C C C J-AC1-15-B J-37-R J-37-A M Image No. FOLDING CUTTER LGHT KIT 5 LL * RH LIGHT ASSY LH LIGHT ASSY LIGHT GUARD NUT FLANGE LOCK 3/8-16 PLT RHSNB 3/8-16X1 GR5 DUAL LED LIGHT RH DUAL LED LIGHT LH NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT LIGHT MNT HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT LIGHT MNT CLAMP HHCS 3/8-16X5 GR5 HHCS 3/8-16X4 1/2 GR5 CABLE TIE.19X125 3DIA 50LB LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 13' BLACK LENS COVER RED LED LENS MODULE AMBER LED LENS MODULE ROTARY CUTTER LIGHT KIT MANUAL S/N Lights were optional Includes Items 3, 4, 5, 6, 8, 9, 10, & 11 Includes Items 3, 4, 5, 7, 8, 9, 10, & 11 Includes items 19, 20, & 21 Includes items 19, 20, & 21 S/N S/N Black lens Red lens Amber lens 07/10/18 RC(M)4620 Rotary Cutter P 29

30 Axle Center Table of Contents Section 3: Axles RC(M)4620 Rotary Cutter P 07/10/18

31 Section 3: Axles Axle Center Table of Contents Ref. Part No. Part Description Comments Revision Dwg H K H C C C C C C C Image No. AXLE CENTER HUB 5 BOLT COMPLETE PIVOT PIN TRAILING ARM GREASE ZERK 1/4-28 X 90-DEG HHCS 1/2-13X3 1/4 GR5 NUT LOCK 1/2-13 PLT NUT HEX JAM SLOTTED 1 1/4-7 PIN COTTER 3/16 X 2 DUAL AXLE SPINDLE BHG 50ODX25X38 07/10/18 RC(M)4620 Rotary Cutter P 31

32 Axle Wing Table of Contents Section 3: Axles RC(M)4620 Rotary Cutter P 07/10/18

33 Section 3: Axles Axle Wing Table of Contents Ref. Part No. Part Description Comments Revision Dwg D S H H K H H H S H H C C C C C C C C C C C C C C N/A C C C Image No. PIN 1 OD X 5.13 USABLE ASY PIVOT PIN TANDEM ARM PIVOT PIN TANDEM ARM WING AXLE RH HUB 5 BOLT COMPLETE TRAILING ARM WING PIVOT PIN TRAILING ARM WALKING TANDEM PIVOT PIN WALKING TANDEM PIV PIN ASY WING AXLE TRAILING ARM WING GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 1/2-13X10 GR5 NUT LOCK 1/2-13 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 2 PIN COTTER 3/16 X 1 1/2 PLT SPRING COMP 62OD.531W 5L SPRING COMP 5OD.5W 5L DUAL AXLE SPINDLE SINGLE AXLE SPINDLE BHG 50ODX25X38 S/N S/N S/N - S/N - S/N S/N S/N + S/N + S/N S/N S/N - S/N S/N RPBY C 07/10/18 RC(M)4620 Rotary Cutter P 33

34 Hub Assembly ( K) Section 3: Axles RC(M)4620 Rotary Cutter P 07/10/18

35 Hub Assembly ( K) Section 3: Axles Ref. Part No. Part Description Comments Revision Dwg D K C C C C C C C C C C C C C Image No. HUB GREASE CAP HUB 5 BOLT COMPLETE GREASE ZERK 1/4-28 THD FORMING HUB STUD 1/2-20X88 GR5 NUT HEX SLOTTED 7/8-14 PLT NUT HEX 1/2-20 X 5/8 HIGH WASHER SPINDLE - 7/8 PIN COTTER 5/32 X 1 3/4 LG HUB 5-BOLT W/CUPS/STUDS SEAL 75ID CR17617 BRG CUP LM BRG CONE 25ID LM BRG CUP LM BRG CONE LM HUB 5-BOLT CASTING 07/10/18 RC(M)4620 Rotary Cutter P 35

36 Tire Options Table of Contents Section 3: Axles RC(M)4620 Rotary Cutter P 07/10/18

37 Section 3: Axles Tire Options Table of Contents Ref. Part No. Part Description Comments Revision Dwg C S C D C C C C C C C Drawing Image Number TIRE & WHL LAM. 6X9X21(5-BOLT) AC TIRE FF 27X7.75X15 5-BOLT TIRE, AC 29" 16 PLY 5 BOLT REINFORCING RING, AC TIRE HHCS 1/2-13X1 1/4 GR8 NUT LOCK 1/2-13 PLT WASHER FLAT 1/2 SAE PLT AC TIRE FF 27X7.75X15 5-BOLT TIRE H29X9.0X15 USED TUBE FOR 29X RIM 2PC 5BLT 15X6.5 07/10/18 RC(M)4620 Rotary Cutter P 37

38 Guards Chain Double Row Front Section 4: Guards RC(M)4620 Rotary Cutter P 07/10/18

39 Guards Chain Double Row Front Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A * D D D D D D K K K D C C C C Image No. CHNGRD FRONT DOUBLE CHAIN HANGER ROD /2 LG ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 94 CHNGRD, FRT DBL CNTR CHNGRD, FRT DBL WING CHNGRD FRT DBL CTR OU ASSY CHNGRD WG FRT DBL ASSY CHNGRD CTR FRT DBL ASSY CHNGRD OTR FRT DBL GUARD EXTENSION RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 5 LINK 07/10/18 RC(M)4620 Rotary Cutter P 39

40 Guards Chain Double Row Rear Section 4: Guards RC(M)4620 Rotary Cutter P 07/10/18

41 Guards Chain Double Row Rear Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A * D D D D D K K C C C Image No. CHNGRD REAR DOUBLE ROD 1/4 X 44 PLTD. RPBY D ROUND ROD.25 X 59 CHNGRD, REAR DBL CTR CHNGRD, WING DBL REAR ASSY CHNGRD CTR REAR DBL ASSY CHNGRD WG REAR DBL RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 4 LINK 07/10/18 RC(M)4620 Rotary Cutter P 41

42 Guards Chain Single Row Front Section 4: Guards RC(M)4620 Rotary Cutter P 07/10/18

43 Guards Chain Single Row Front Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A * D D D D D D K K K D C C C C Image No. CHNGRD FRONT SINGLE CHAIN HANGER ROD /2 LG ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 94 CHNGRD, FRT SGL WING CHNGRD, FRT SGL CNTR CHNGRD FRT SGL CTR OU ASSY CHNGRD WG FRT SGL ASSY CHNGRD CTR FRT SGL ASSY CHNGRD OTR FRT SGL GUARD EXTENSION RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 5 LINK 07/10/18 RC(M)4620 Rotary Cutter P 43

44 Guards Chain Single Row Rear Section 4: Guards RC(M)4620 Rotary Cutter P 07/10/18

45 Guards Chain Single Row Rear Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A * D D D D D K K C C C Image No. CHNGRD REAR SINGLE ROD 1/4 X 44 PLTD. RPBY D ROUND ROD.25 X 59 CHNGRD, WING SGL REAR CHNGRD, REAR SGL CTR ASSY CHNGRD WG REAR SGL ASSY CHNGRD CTR REAR SGL RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 4 LINK 07/10/18 RC(M)4620 Rotary Cutter P 45

46 Driveline Center ( C) Comer Section 5: Drivelines RC(M)4620 Rotary Cutter P 07/10/18

47 Driveline Center ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. PTO E60 X NM CLUTCH COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE, OUTER COMER SHAFT, SPLINED COMER ROLL PIN, INNER TUBE CO INNER YOKE COMER CLUTCH, COMPLETE ASSY COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 07/10/18 RC(M)4620 Rotary Cutter P 47

48 Driveline Conv RPM ( C) Walterscheid Section 5: Drivelines Applies to RCM RC(M)4620 Rotary Cutter P 07/10/18

49 Driveline Conv RPM ( C) Walterscheid Section 5: Drivelines Applies to RCM4620 Ref. Part No. Part Description Comments Revision Dwg C C C C Drawing Image Number PTO 2500 CAT /8-21 * WS YOKE 1 3/4-20 SPL.I.C WS YOKE 1 3/8-21 SPL. AS WS CROSS & BEARING KIT 2500 WS INBOARD YOKE 2500 WS SPRING PIN 10 X 90 WS INNER PROFILE S4 WS PROFILE & SLEEVE W.A. WS INBOARD YOKE 2400 DECAL DANGER GUARD MISS PTO WALTERSCHEID SCREW WS BEARING RING - SC25 WALTERSCHEID SAFETY CHAIN WS OUTER SHIELD TUBE OVAL DECAL DANGER PTO DRIVELINE WS INNER SHIELD TUBE RND. WS ASSY COLLAR KIT WS SHIELD CONE 7 RIB WS ZERK WS SUPPORT BEARING WS HEX BOLT M16 X 90 GR 8 WS LOCK NUT M16 SHIELD KIT, C WS REINFORCING COLLAR (S/N ) 07/10/18 RC(M)4620 Rotary Cutter P 49

50 Driveline Conv. 540 RPM ( C) Walterscheid Section 5: Drivelines Applies to RC RC(M)4620 Rotary Cutter P 07/10/18

51 Driveline Conv. 540 RPM ( C) Walterscheid Section 5: Drivelines Applies to RC4620 Ref. Part No. Part Description Comments Revision Dwg C C C C Drawing Image Number PTO 2500 X NO CLUTCH * WS YOKE 1 3/4-20 SPL.I.C WS YOKE 1 3/8"-6 SPL. ASG WS CROSS & BEARING KIT 2500 WS INBOARD YOKE 2500 WS SPRING PIN 10 X 90 WS INNER PROFILE 2400 WS PROFILE & SLEEVE W.A. WS INBOARD YOKE 2400 DECAL DANGER GUARD MISS PTO WALTERSCHEID SCREW WS BEARING RING - SC25 WALTERSCHEID SAFETY CHAIN WS OUTER SHIELD TUBE RND. DECAL DANGER PTO DRIVELINE WS INNER SHIELD TUBE ROUND WS Q.D. PIN KIT WS SHIELD CONE 7 RIB WS ZERK WS SUPPORT BEARING WS HEX BOLT M16 X 90 GR 8 WS LOCK NUT M16 WS SHIELD CONE - 12 RIB SHIELD KIT, C WS REINFORCING COLLAR (S/N ) 07/10/18 RC(M)4620 Rotary Cutter P 51

52 Driveline CV RPM ( C) Weasler Section 5: Drivelines Applies to RCM RC(M)4620 Rotary Cutter P 07/10/18

53 Driveline CV RPM ( C) Weasler Section 5: Drivelines Applies to RCM4620 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET 07/10/18 RC(M)4620 Rotary Cutter P 53

54 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Applies to RCM4620 Section 5: Drivelines RC(M)4620 Rotary Cutter P 07/10/18

55 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Section 5: Drivelines Applies to RCM4620 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV ORCLTCH * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE OUTER GUARD WE GUARD REPAIR KIT WE SAFETY SIGN WE SAFETY SIGN WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE OVERRUNNING THRST CLTCH ASM 07/10/18 RC(M)4620 Rotary Cutter P 55

56 Driveline CV RPM ( C) Section 5: Drivelines Applies to RCM RC(M)4620 Rotary Cutter P 07/10/18

57 Driveline CV RPM ( C) Section 5: Drivelines Applies to RCM4620 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD 07/10/18 RC(M)4620 Rotary Cutter P 57

58 Driveline CV 540 RPM ( C) Weasler Section 5: Drivelines Applies to RC RC(M)4620 Rotary Cutter P 07/10/18

59 Driveline CV 540 RPM ( C) Weasler Section 5: Drivelines Applies to RC4620 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT W/ CHAINS WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET 07/10/18 RC(M)4620 Rotary Cutter P 59

60 Driveline Wing ( C) Comer Section 5: Drivelines RC(M)4620 Rotary Cutter P 07/10/18

61 Driveline Wing ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. PTO V80 X NM CLUTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE OUTER COMER OUTER TUBE ROLL PIN COMER WIPER CO COMPLETE OUTER TUBE CO INNER TUBE COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER CO SAFTEY CHAINS CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP CO LABEL W/CUSTOMER CODE (S/N ) 07/10/18 RC(M)4620 Rotary Cutter P 61

62 Divider Box 1000 RPM 35:1 ( C) Section 6: Gearboxes Applies to RCM RC(M)4620 Rotary Cutter P 07/10/18

63 Divider Box 1000 RPM 35:1 ( C) Section 6: Gearboxes Applies to RCM4620 Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number DIV BOX 1000RPM 35:1 * CO BRG TAPPERED CO CASING CO DUST LIP (45X85X10) CO SNAP RING COMER SHIM KIT CO GEAR M6 Z20 CO SHAFT 1" 3/4 Z20 CO GEAR M6 Z27 CO SHAFT 1" 3/4 Z20 TOP COVER PLATE CO BOLT M10 X 35 8 CO 1/2" GAS OIL PLUG W/EMB HEX CO PLUG 3/8 GAS (SOLID PLUG) 07/10/18 RC(M)4620 Rotary Cutter P 63

64 Divider Box 540 RPM 1:35 ( C) Section 6: Gearboxes Applies to RC RC(M)4620 Rotary Cutter P 07/10/18

65 Divider Box 540 RPM 1:35 ( C) Section 6: Gearboxes Applies to RC4620 Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number DIV BOX 540RPM 1:35 * CO BRG TAPPERED CO CASING CO DUST LIP (45X85X10) CO SNAP RING COMER SHIM KIT CO GEAR M6 Z20 CO SHAFT 1" 3/4 Z20 CO GEAR M6 Z27 CO SHAFT 1" 3/4 Z20 TOP COVER PLATE CO BOLT M10 X 35 8 CO 1/2" GAS OIL PLUG W/EMB HEX CO PLUG 3/8 GAS (SOLID PLUG) 07/10/18 RC(M)4620 Rotary Cutter P 65

66 Gearbox ( C) Section 6: Gearboxes RC(M)4620 Rotary Cutter P 07/10/18

67 Gearbox ( C) Section 6: Gearboxes Ref. Part No. Part Description Comments Revision Dwg A A U U U U U U Image No. CO CAP CO NAME PLATE CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO BLANK WASHER COMER SHIM KIT COMER SHIM KIT CO SEAL PROTECTOR CO BRG (60X110X275) CO BRG TAPERED CO BRG (50X90X275) CO BOLT M10X22 HHB CO CASTLE NUT M36X3 CO COTTER PIN B 5X60 CO SNAP RING 50 UNI7435 CO SNAP RING UNI 7437 CO OIL PLUG 3/8 CO GAS PLUG 1/2 CO OIL SEAL 60X110X12 SL CO DUST LIP (45X85X10) CO CASTING & MACHINING CO TOP COVER CO INPUT SHAFT 1 3/4"-20 CO OUTPUT SHAFT GEAR CROWN Z21 M7.75 CO CASTLE NUT CO COTTER PIN B6X70 SLD-SPRTLY 07/10/18 RC(M)4620 Rotary Cutter P 67

68 Gearbox ( C) Section 6: Gearboxes RC(M)4620 Rotary Cutter P 07/10/18

69 Gearbox ( C) Section 6: Gearboxes Ref. Part No. Part Description Comments Revision Dwg C A A U U U U U U Image No. GBOX RC50 1:1 REV * CO CAP CO NAME PLATE CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO BLANK WASHER COMER SHIM KIT COMER SHIM KIT CO SEAL PROTECTOR CO BRG (60X110X275) CO BRG TAPERED CO BRG (50X90X275) CO BOLT M10X22 HHB CO CASTLE NUT M36X3 CO COTTER PIN B 5X60 CO SNAP RING 50 UNI7435 CO SNAP RING UNI 7437 CO OIL PLUG 3/8 CO GAS PLUG 1/2 CO OIL SEAL 60X110X12 SL CO DUST LIP (45X85X10) CO CASTING & MACHINING CO TOP COVER CO INPUT SHAFT 1 3/4"-20 CO OUTPUT SHAFT GEAR CROWN Z21 M7.75 CO CASTLE NUT CO COTTER PIN B6X70 SLD-SPRTLY 07/10/18 RC(M)4620 Rotary Cutter P 69

70 Gearbox 1000 RPM ( C) Comer Applies to RCM4620 Section 6: Gearboxes RC(M)4620 Rotary Cutter P 07/10/18

71 Gearbox 1000 RPM ( C) Comer Section 6: Gearboxes Applies to RCM4620 Ref. Part No. Part Description Comments Revision Dwg C U U U U U U C U Drawing Image Number GBOX RCM :1 CCW * CO HOUSING CO CROWN GEAR Z18 M7.8 CO BEARING RTA25 CO OIL SEAL 45 X 85 X 10 CO INPUT SHAFT 1 3/4"-20 CO SNAP RING UNI 7437 CO SHIM 87 CO SNAP RING 50 UNI7435 CO CASTLE NUT CO SHIM 50.3X70.3 CO BEARING CO SEAL PROTECTOR CO OIL SEAL 60X110X12 CO BEARING CO OUTPUT SHAFT CO COTTER PIN B 5X60 CO CAP CO BLANK WASHER CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO COVER CO BOLT M10X22 HHB COMER U OIL PLUG CO OIL PLUG 3/8 CO COTTER PIN B6X70 SLD-SPRTLY CO CASTLE NUT M36X3 CO CROWN GEAR Z22 M7.8 07/10/18 RC(M)4620 Rotary Cutter P 71

72 Gearbox 540 RPM ( C) Applies to RC4620 Section 6: Gearboxes RC(M)4620 Rotary Cutter P 07/10/18

73 Gearbox 540 RPM ( C) Section 6: Gearboxes Applies to RC4620 Ref. Part No. Part Description Comments Revision Dwg C U U U U U U C U Drawing Image Number GBOX RC :46 CW * CO HOUSING CO CROWN GEAR Z22 M8 CO BEARING RTA25 CO OIL SEAL 45 X 85 X 10 CO INPUT SHAFT 1 3/4"-20 CO SNAP RING UNI 7437 CO SHIM 87 CO SNAP RING 50 UNI7435 CO CASTLE NUT CO SHIM 50.3X70.3 CO BEARING CO SEAL PROTECTOR CO OIL SEAL 60X110X12 CO BEARING CO OUTPUT SHAFT CO COTTER PIN B 5X60 CO CAP CO BLANK WASHER CO SHIM 45.3X5 CO SHIM 40.3 X 67 X 1 CO COVER CO BOLT M10X22 HHB COMER U OIL PLUG CO OIL PLUG 3/8 CO COTTER PIN B6X70 SLD-SPRTLY CO CASTLE NUT M36X3 CO CROWN GEAR Z15 M8 * Notes: Oil Type 80-90W Capacity 10 Pints R. H. Deck 07/10/18 RC(M)4620 Rotary Cutter P 73

74 Hydraulic Cylinder ( C) (Red Lion) Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

75 Hydraulic Cylinder ( C) (Red Lion) Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C N/A N/A N/A N/A N/A N/A C N/A C Drawing Image Number CYL REP 75X8X13 ROD (TIE) * MON CLEVIS CAP 75-3/4ORB-0 MON ROD CAP /4ORB MON PISTON TH-TP-TD MON ROD CYL TP MON TUBE WELDT TP MON TIE ROD MON PIN KIT 00C/W COTTER PIN MON SEAL HALLITE 605 ROD 13 MON ORING /16X2 1/2 LION WIPER SEAL MON SEAL PTFE PSTN RING 2 3/4D MON WEAR RNG GFN MON NYLON THREAD PROTECTOR LION ROD CLEVIS 1 1/8-12UNF NUT HEX 1/2-13 PLT MON PISTON NUT LION PLUG 3/4-16UNF SOCKET HD MON SEAL DUAL 75 MON SEAL KIT C 07/10/18 RC(M)4620 Rotary Cutter P 75

76 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

77 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C Drawing Image Number CYL 3X12X25 ROD (TIE ROD) * NUT HEX 1/2-13 PLT MON PISTON NUT MON SET SCREW 3/8INC ONE PIECE MON PISTON 00-0-TSS-ISO-WR MON CYL TUBE MON TIE ROD LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 0-9/16 ORB MON CYL ROD MON ROD CAP /16ORBTS MON SEAL KIT KR30WR-125 TSS 07/10/18 RC(M)4620 Rotary Cutter P 77

78 Hydraulic Cylinder Plumbing Components Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

79 Hydraulic Cylinder Plumbing Components Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C C C C Drawing Image Number CYL REP 25X8X25 ROD (TIE) REP CYL 3X8X25 ROD (TIE) CYL REP 75X8X13 ROD (TIE) AD 3/4MORB 3/4MJIC CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4MORB 3/4FJIC CYL 5X12X25ROD (TIE ROD) CYL 3X12X25 ROD (TIE ROD) OREL 1/16 9/16MJIC 9/16MORB HH1/4R /16FJIC TE 9/16MJIC BH 9/16MJIC 9/16MJ HH3/8R /16FJIC 3/4MORB VENT PLUG - 9/16-18 PLATED S/N must grind 1/4" out of the radius of the lug that the base end of the cylinder attaches to if your machine is under S/N S/N /10/18 RC(M)4620 Rotary Cutter P 79

80 Hydraulic Cylinder Rephase ( C) 3X8 Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

81 Hydraulic Cylinder Rephase ( C) 3X8 Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C N/A N/A N/A N/A N/A N/A N/A Drawing Image Number REP CYL 3X8X25 ROD (TIE) * NUT HEX 1/2-13 PLT MON PISTON NUT LION PIN MON CLEVIS PIN COTTER SCREW SET SH 3/8-16X3/8 TYPE C LION PLUG 3/4-16UNF SOCKET HD MON ROD SEAL MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON CLEVIS CAP MON PISTON MON TUBE MON TIE ROD LION ROD CLEVIS 1 1/4 (1PIN) MON ROD CAP LION ROD 25 DIA. ASAE 8 O-RING EXPANDER WEAR RING MON REPAIR KIT Only in Seal Kit Item 21 Only in Seal Kit Item 21 Only in Seal Kit Item 21 Only in Seal Kit Item 21 Only in Seal Kit Item 21 Only in Seal Kit Item 21 Only in Seal Kit Item 21 07/10/18 RC(M)4620 Rotary Cutter P 81

82 Hydraulic Cylinder Rephase ( C) Red Lion 25 X 8 Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

83 Hydraulic Cylinder Rephase ( C) Red Lion 25 X 8 Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C N/A N/A N/A N/A N/A N/A Drawing Image Number CYL REP 25X8X25 ROD (TIE) * NUT HEX 5/8-18 PLT MON PISTON NUT MON SET SCREW 3/8INC ONE PIECE LION PLUG 3/4-16UNF SOCKET HD MON SEAL PTFE PISTN RING 3-1/4 MON SEAL HALLITE 605 ROD 1-1/4 MON O RING /16X3 DUR90 MON SEAL WIPER ROD 250 METAL MON SEAL DUAL 25 MON WEAR RNG GFN MON PISTON TP MON TUBE WELDT TP LION TIE ROD 5/8 X 8 LION ROD CLEVIS 1 1/4 (1PIN) MON CLEVIS CAP 25-3/4ORB-0 MON ROD CAP /4ORB LION ROD 25 DIA. ASAE 8 MON PIN KIT 00C/W COTTER PIN MON SEAL KIT 32TP Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 07/10/18 RC(M)4620 Rotary Cutter P 83

84 Hydraulic Cylinder Wing Deck ( C) Cross Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

85 Hydraulic Cylinder Wing Deck ( C) Cross Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C 1D D D A A A A D N/A N/A N/A N/A 1D D A1141 1D A C Drawing Image Number CYL 5x12x25ROD (TIE ROD) * CROSS TUBE CROSS ROD CROSS ROD CLEVIS CROSS NUT, CLEVIS & TIE ROD CROSS SCREW, CAP CROSS TIE ROD TIE ROD NUT CROSS HEAD CROSS BACKUP PISTON U-CUP ROD WIPER O-RING PISTON PISTON CROSS BASE CROSS C PISTON NUT CROSS CROSS CLEVIS PIN CROSS PIN, CLIP SEAL KIT CROSS 5 CYL 1C4429 Only found in seal kit 18 Only found in seal kit 18 Only found in seal kit 18 Only found in seal kit 18 07/10/18 RC(M)4620 Rotary Cutter P 85

86 Hydraulic Cylinder Wing Deck ( C) Midway Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

87 Hydraulic Cylinder Wing Deck ( C) Midway Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C 5M5120 2M5418 1M6010 2A0012 2A0006 7M5320 2A0016 3M5410 N/A N/A N/A N/A 4M5102 6M5152 2A0024 2A0208 2A C Drawing Image Number CYL 5x12x25ROD (TIE ROD) MW TUBE MW ROD 1 1/4 DIA X 10' STROKE MW CLEVIS STD. DUTY MW NUT CLEVIS & TIE ROD MW CAPSCREW TIE ROD MIDWAY MW TIE ROD NUT MW HEAD 3-1/2X1-1/4ROD 9/16SAE MW BACK UP TUBE MW WIPER MW U-CUP MW O-RING MW PISTON 3 1/2 DIA. MW BASE 3 1/2 MW PISTON NUT 1-14 MW CLEVIS PIN MW PIN CLIP SEAL KIT C MW 3A5102 Found in Seal Kit #18 Found in Seal Kit #18 Found in Seal Kit #18 Found in Seal Kit #18 07/10/18 RC(M)4620 Rotary Cutter P 87

88 Hydraulic Cylinders W/ Mounting Components Section 7: Hydraulics RC(M)4620 Rotary Cutter P 07/10/18

89 Hydraulic Cylinders W/ Mounting Components Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg H D H S H C C C C C C C C C C C C C C C Drawing Image Number WLDMT. CYLINDER PIN PIN 1 OD X 5.13 USABLE MOUNT REPH CYL ADJ RH TRANSPORT BAR W/ DECALS MOUNT REPH CYL ADJ LH RHSNB 1/2-13X1 1/2 GR5 EYE BOLT 1-8X6 1/2 LG PLT SP NUT HEX JAM 1-8 PLT NUT HEX WHIZ 1/2-13 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 SAE PIN, HAIR COTTER 3/16 WIRE DIA PIN COTTER 3/16 X 1 1/2 PLT PIN CLEVIS 1 X 4 11/16 USABLE CYL 5X12X25ROD (TIE ROD) CYL 3X12X25 ROD (TIE ROD) REP CYL 3X8X25 ROD (TIE) CYL REP 75X8X13 ROD (TIE) STRK CNTRL SPCRS 125 TO 50 CYL REP 25X8X25 ROD (TIE) S/N must grind 1/4" out of the radius of the lug that the base end of the cylinder attaches to if your machine is under S/N S/N /10/18 RC(M)4620 Rotary Cutter P 89

90 Blade Carrier Components Section 8: Options & Accessories RC(M)4620 Rotary Cutter P 07/10/18

91 Blade Carrier Components Section 8: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg H D C C C C C C C A Image No. BLD PLT DSHPN WMT 31C/C DISHPAN 31" CENTER HHCS 1-8X2 1/2 GR5 BLD BLT 1 1/8-12X44 W/.25KEY NUT HEX TOP LOCK 1-8 PLT NUT HEX TOP LOCK 1 1/8-12 PLT WASHER FLAT 1" HARDENED CUTTER BLADE 1/2X4X29 CW CUTTER BLADE 1/2X4X29 CCW BLADE BOLT KIT Center deck & Right hand deck Left hand deck 07/10/18 RC(M)4620 Rotary Cutter P 91

92 Blade Carrier Options Section 8: Options & Accessories RC(M)4620 Rotary Cutter P 07/10/18

93 Blade Carrier Options Section 8: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A A Image No. 20' DIAMOND BLADE BAR W/PANS 20' DIAMOND BLADE BAR 07/10/18 RC(M)4620 Rotary Cutter P 93

94 Lights 5 Inch (LED) Section 8: Options & Accessories RC(M)4620 Rotary Cutter P 07/10/18

95 Lights 5 Inch (LED) Section 8: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A S S D C C C C C C D C C D C C C C C C J-AC1-15-B J-37-R J-37-A M Image No. FOLDING CUTTER LGHT KIT 5 LL * RH LIGHT ASSY LH LIGHT ASSY LIGHT GUARD NUT FLANGE LOCK 3/8-16 PLT RHSNB 3/8-16X1 GR5 DUAL LED LIGHT RH DUAL LED LIGHT LH NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT LIGHT MNT HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT LIGHT MNT CLAMP HHCS 3/8-16X5 GR5 HHCS 3/8-16X4 1/2 GR5 CABLE TIE.19X125 3DIA 50LB LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 13' BLACK LENS COVER RED LED LENS MODULE AMBER LED LENS MODULE ROTARY CUTTER LIGHT KIT MANUAL S/N Lights were optional Includes Items 3, 4, 5, 6, 8, 9, 10, & 11 Includes Items 3, 4, 5, 7, 8, 9, 10, & 11 Includes items 19, 20, & 21 Includes items 19, 20, & 21 S/N S/N Black lens Red lens Amber lens 07/10/18 RC(M)4620 Rotary Cutter P 95

96 Shredder Blades Table of Contents Section 8: Options & Accessories RC(M)4620 Rotary Cutter P 07/10/18

97 Shredder Blades Section 8: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg D H C C C C C Image No. BLADE BUSHING BLD BAR WMT 45C/C FLAT HHCS 1-8X4 1/2 PLT GR8 NUT HEX TOP LOCK 1-8 PLT CUTTER BLADE 1/2X4X23 CCW CUTTER BLADE 1/2X4X23 CW CUTTER BLADE 1/2X4X25 FLAT Left hand deck Center deck & Right hand deck 07/10/18 RC(M)4620 Rotary Cutter P 97

98 Decals Table of Contents Section 9: Decals RC(M)4620 Rotary Cutter P 07/10/18

99 Section 9: Decals Decals Table of Contents Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. DECAL WARNING PINCH PT/CRUSH DECAL CAUTION 540 RPM DECAL CAUTION 1000 RPM DECAL DANGER PTO DRIVELINE EN DECAL FLAG DECAL AMBER REFLECTOR DECAL RED REFLECTOR DECAL WARNING OPERATING ANGLE DECAL DANGER PD GUARD MISS SML DECAL DANGER PTO DRIVELINE DECAL DANGER THROWN OBJ CUTTER DECAL DANGER RAISED WING HAZAR DECAL DANGER ROTATE BLADE RPBY C DECAL DANGER CRUSHING TWO IMP DECAL SAFETY COMBO SUNWEST DECAL DANGER ROLLOVER HAZARD DECAL WARNING HYD PRESS LONG FOLDING CUTTER SPEED WARNING DECAL REFLECTOR RED 2X9 DECAL REFLECTOR AMBER 2X9 DECAL LANDPRIDE 30" GREEN DECAL LANDPRIDE 34" TAN/BROWN DECAL LANDPRIDE 16" BROWN/GOLD DECAL BLADE ROTATION DECAL 7 YEAR GEARBOX WARRANTY DECAL RC4620 GREEN DECAL RC4620 GOLD DECAL RCM4620 GREEN DECAL RCM4620 GOLD DECAL JACK ADJUSTMENT DECAL, WRANGLER 540 RPM 1000 RPM Obsolete Beige & Yellow units Green, Orange & Red units Beige & Yellow units Green, Orange & Red units Beige & Yellow units Green, Orange & Red units 07/10/18 RC(M)4620 Rotary Cutter P 99