FrelTec GmbH. SMD Power Inductors
|
|
- Sandra Bond
- 5 years ago
- Views:
Transcription
1 GmbH Mathildenstr. 10A Starnberg Germany 10/12/2011 1/13 GmbH
2 SPECIFICATION Part Number * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor : 2,5x2,0x1,0 G : General use : 2,5x2,0x1,2 C : Choke use The value is given in µh and u indicates the decimal point. When higher than 100µH then l the last digit is the multiplier which denotes the number of J: ±5% E02 : 2000pcs for , , , and (7" reel) K: ±10% E01 : 1000pcs for (13" reel) zero following : 3,2x1,6x1,8 Example: M: ±20% E0A : 500pcs for (7" reel) : 3,2x2,5x1,55 3U3 : 3,3 µh N: ±30% : 3,2x2,5x2,0 220 : 22 µh : 4,5x3,2x2,6 101 : 100 µh : 5,7x5,0x4,7 * not all combination is possible 10/12/2011 2/13 GmbH
3 Dimensions and land pattern: Type A B C E F H I J ,5±0,2 2,0±0,2 1,0 max, 0,4±0,2, 1,0min, 2,1 0,90 0, ,5±0,2 2,0±0,2 1,2 max, 0,4±0,2, 1,0min 2,1 0,90 0, ,2±0,3 1,6±0,2 1,8±0,3 0,7min, 0,7min, 1,5 1,5 1, ,2±0,3 2,5±0,2 1,55±0,3 0,7min, 0,7min, 2,0 1,5 1, ,2±0,3 2,5±0,2 2,0±0,3 0,7min, 0,7min, 2,0 1,5 1, ,5±0,3 3,2±0,2 2,6±0,3 1,0min, 1,0min, 3,0 2,0 1, ,7±0,3 5,0±0,3 4,7±0,5 1,3min, 1,7min, 5,0 2,0 2,0 unit: mm Inductance and rated current ranges ,47~10μH 2,80~0,65A ,47~10μH 3,70~0,9A ,00~100μH 1,00~0,1A ,00~560μH 0,445~0,04A ,00~2200μH 0,50~0,03A C 0,12~100μH 0,97~0,08A C 0,47~120μH 3,40~0,17A C 1,00~560μH 1,00~0,06A C 1,00~470μH 1,08~0,09A C 0,12~10000μH 6,00~0,05A Electrical specifications at 25 C 10/12/2011 3/13 GmbH
4 Electrical Characteristics G- Type DCR (Ω) max. I rms(a) typical I sat(a) typical U47 0,47 0,048 2,30 2,80 1U0 1,0 0,085 1,70 2,00 1U5 1,5 0,128 1,40 1,70 2U2 2,2 0,190 1,10 1,40 M 1MHz, 0,1V 3U3 3,3 0,304 0,94 1,20 4U7 4,7 0,440 0,78 0,98 6U8 6,8 0,541 0,70 0,82 0,854 0,52 0, G- Type DCR (Ω) max I rms(a) typical I sat(a) typical U47 0,47 0,056 2,20 3,70 1U0 1,0 0,088 1,80 2,70 1U5 1,5 0,126 1,50 2,20 2U2 2,2 0,155 1,30 2,00 3U3 3,3 M 1MHz, 0,1V 0,272 1,00 1,60 4U7 4,7 0,406 0,81 1,30 5U6 5,6 0,450 0,72 1,15 6U8 6,8 0,612 0,66 1,10 0,756 0,59 0, G- Type DCR IDC SRF (Ω) max. (A) max. (MHz) min. 1U0 1,0 0,078 1, N 1U5 1,5 0,068 1, U2 2,2 0,126 0, M 4U7 4,7 0,195 0, ,420 0, MHz, 0,1V 0,750 0, ,000 0, K 1,400 0, ,200 0, ,200 0, ,500 0, /12/2011 4/13 GmbH
5 G- Type Toleran ce Conditio n Quality Factor Spec. min. DCR (Ω) max. IDC (A) max. SRF (MHz) min. 1U0 1,0 0,50 0, M 1U2 1,2 0,60 0, U5 1,5 0,60 0, U8 1,8 0,70 0, U2 2,2 0,80 0, U7 2,7 0,90 0, U3 3,3 1,00 0, K, M 3U9 3,9 1,10 0, U7 4,7 1,20 0, U6 5,6 1,30 0, U8 6,8 1,50 0, U2 8,2 1,60 0, MHz, 0,1V 1,80 0, ,00 0, ,20 0, ,50 0, MHz, 0,1V 2,80 3,10 0,150 0, ,50 0, ,90 0, ,30 0, ,90 0, ,50 0,080 9,0 J, K ,20 0,070 8, ,00 0,080 8, ,00 0,075 7, ,30 0,070 7, ,20 0,065 6, KHz, 0,1V 11,80 12,50 0,065 0,065 5,5 5, ,00 0,065 5, ,00 0,050 5, ,00 0,045 5, ,00 0,040 5,0 ref 10/12/2011 5/13 GmbH
6 G- Type 1U0 1,0 Quality Factor Spec. min. DCR (Ω) max. IDC (A) max. SRF (MHz) min. 0,20 0, U2 1,2 0,20 0, U5 1,5 0,30 0, U8 1,8 0,30 0, M 20 2U2 2,2 0,30 0, U7 2,7 0,32 0, U3 3,3 0,35 0, U9 3,9 0,38 0, U7 4,7 0,40 0, U6 5,6 0,47 0, K, M 30 6U8 6,8 0,50 0, U2 8,2 0,56 0, MHz, 0,1V 0,56 0, ,62 0, ,73 0, MHz, 0,82 0, ,1V 0,94 0, ,10 0, ,20 0, ,40 0, ,50 0, ,70 0,200 9, ,90 0,180 8, ,20 0,170 7, J, K 3,70 0,130 5, KHz, 6,80 0,100 4, ,1V 8,20 0,095 3,6 40 2,50 0,160 6, ,00 0,150 6, ,50 0,120 5, ,40 0,110 4, ,70 0,090 3, ,80 0,080 3, ,50 0,070 2, ,00 0,065 2, ,50 0,060 2,2 1KHz, ,00 0,050 2,0 0,1V ,00 0,045 1,8 252KHz, ,00 0,040 1,6 0,1V ,00 0,035 1, ,00 0,030 1,3 10/12/2011 6/13 GmbH
7 C- High currency type (choke use) DCR IDC SRF (Ω) max. (A) max. (MHz) min. U12 0,12 0,112 0, U22 0,22 0,140 0, U47 0,47 0,210 0, U68 0,68 M 0,250 0, U0 1,0 0,364 0, U2 2,2 0,533 0, U3 3,3 0,700 0, MHz, 0,1V 4U7 4,7 0,845 0, K, M 6U8 6,8 1,350 0, ,690 0, ,900 0, J, K 4,700 0, ,40 0, ,60 0, C- High currency type (choke use) DCR (Ω) ±20% Isat (A) max. Irms (A) max. SRF (MHz) min. U47 0,47 0,030 3,40 2, U0 1,0 0,045 2,30 2, U5 1,5 0,057 1,75 1, U2 2,2 N 0,076 1,55 1, U3 3,3 0,120 1,25 1, U7 4,7 0,180 1,00 1, U8 6,8 0,240 0,85 0, MHz, 0,380 0,75 0, ,1V ,570 0,60 0, ,810 0,50 0, M 1,150 0,38 0, ,780 0,33 0, ,280 0,28 0, ,700 0,18 0, ,380 0,17 0, C- High currency type (choke use) DCR IDC SRF (Ω) max. (A) max. (MHz) min. 1U0 1,0 0,078 1, U2 2,2 0,126 0, U3 3,3 0,165 0, M 4U7 4,7 0,195 0, U8 6,8 0,330 0, ,572 0, ,923 0, K, M MHz, 0,1V 1,690 0, ,550 0,100 8, ,100 0,080 7, ,92 0,070 5, J, K 13,00 0,060 4, ,10 0,060 4, ,70 0,060 3, ,60 0,060 3,4 10/12/2011 7/13 GmbH
8 C- High currency type (choke use) DCR IDC SRF (Ω) max. (A) max. (MHz) min. 1U0 1,0 0,08 1, U5 1,5 0,09 1, M 2U2 2,2 0,11 0, U3 3,3 0,13 0, U7 4,7 0,15 0, K, M 6U8 6,8 0,20 0, ,24 0, ,32 0, MHz, 0,1V ,60 0, ,00 0, ,10 0, J, K 1,70 0,220 8, ,20 0,190 6, ,50 0,130 5, ,00 0,110 4, ,80 0,100 3, KHz, 0,1V 8,50 0,090 3, C- High currency type (choke use) DCR (Ω) max. IDC (A) max. SRF (MHz) min. U12 0,12 0,0098 6, U27 0,27 0,0140 5, U47 0,47 0,0182 4, U0 1,0 0,0270 4, U5 1,5 M 0,0310 3, U2 2,2 0,0410 3, U3 3,3 0,0500 2, U7 4,7 1MHz, 0,1V 0,0574 2, U8 6,8 0,1040 2, ,1300 1, ,210 1, ,266 1, ,448 0, ,560 0, ref ,938 0,640 7, ,204 0,560 6, ,660 0,420 5,0 K, M KHz, 3,360 0,320 4, ,1V 6,160 0,270 3, ,560 0,240 2, ,34 0,190 1, ,42 0,150 1, ,10 0,100 1,2 10KHz, 0,1V ,04 0,070 0, ,0 0,050 0,5 10/12/2011 8/13 GmbH
9 Tape and Reel Dimensions INDUCTORS Type Tape size W P unit: mm 10/12/2011 9/13 GmbH
10 Cover Tape Peel off Strength Peel-off force should be in the range 0,1N~0,6N at a peel-off speed of 300±10 mm/min Storage Temperature: 25±3 C Humidity < 80%RH Caracteristics /252012/ C Temperature range: -55 C to +125 C Rated DC Current(I sat): The current when the inductance becomes 30% typical its initial value (Ta=25 C). Temperature Rise Current(I rms): The actual current when the temperature of coil becomes T40 C. (Ta=25 C) Caracteristics /322520/ C/ C/453226/ C/ C Operating temperature range: -40 C to +85 C Rated DC Current: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of coil increases T20 C. The smaller one is defined as Rated DC Current. (Ta=25 C) ead Free Reflow Soldering Profile Stock period The performance of these products, including the solderability, is guaranteed for 6 month after production date code, provided that they remain packed as they were when delivered and stored at a temperature of 25 C ± 3 C and a relative humidity less than 80%RH 10/12/ /13 GmbH
11 Environmental Items Specifications s / Methods High temperature Storage ow temperature Storage test Humidity test Thermal shock test Mechanical No case deformation or change in appearance. / 10% Q/Q 30% Temperature 85±2 C, Time: 48±2 hours, ed after 1hour at room temperature. Temperature -25±2 C, Time: 48±2 hours, ed after 1hour at room temperature. Temperature 40±2 C, 90~95% relative humidity Time: 96±2 hours, apply rated current, ed after 1hour at room temperature. First -25 C 30minutes then 25 C 10 minutes last 85 C 30 minutes, as 1 cycle. Go through 5 cycles. ed after 1 hour at room temperature. Items Specifications s / Methods Solderability test Heat endurance of Reflow soldering Vibration test Shock resistance Terminal area must have 90% minimum solder coverage. No case deformation or change in appearance. / 10% Q/Q 30% Product with ead-free terminal: Dip pads in flux then dip in solder pot at 245±5 C for 3 seconds. Refer to the reflow soldering condition. Go through 3 times. Apply frequency 10~55Hz. 1,5mm amplitude in each of perpendicular direction for 2 hours. Drop down with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. 10/12/ /13 GmbH
12 For this part: It does not use the materials that include the substances specified in RoHS, the detail refer to the part of prohibition or exclusion items in RoHS (2002/95/EC). Cadmium and cadmium compounds (permissive content<100 ppm) ead and lead compounds (permissive content<1000 ppm) Exceptions specified: ead contained in the glass of cathode ray tubes, electronic components and fluorescent tubes. The glass material used in the electronic components, which includes resistor elements, conductive pastes (silver or copper ones), adhesives, glass frit and sealing materials. Mercury and its mercury compounds (permissive content<1000 ppm) Hexavalent chromium compounds (permissive content<1000 ppm) Polybrominated biphenyls (PBB) (permissive content<1000 ppm) Polybrominated diphenylethers (PBDE) (permissive content<1000 ppm) 10/12/ /13 GmbH
13 Published by GmbH Mathildenstr. 10A; Starnberg; Germany 2010 GmbH. All Rights Reserved. The following applies to all products named in this publication: 1. The information describes the type of component and shall not be considered as assured characteristics. 2. Terms of delivery and rights to change design reserved. 3. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. Nevertheless, we explicitly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 4. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 5. The warnings, cautions and product-specific notes must be observed. 6. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous ). Useful information on this will be found in our Material Data Sheets. Should you have any more detailed questions, please contact our sales offices. 7. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true for the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 8. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the General conditions for the supply of products and services of the electrical and electronics industry published by the German Electrical and Electronics Industry Association (ZVEI), available at 9. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. 10. The trade name is a trademark registered or pending in Europe and in other countries. 10/12/ /13 GmbH
FrelTec GmbH. Multilayer Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Multilayer Ceramic Chip Inductors SMD 10/12/2010 1/12 Freltec GmbH www.freltec.com SPECIFICATION Part Number 090 02 * 101 * J * T04 Type Size Value Tolerance
More informationWire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationSMT power inductors. Size 12.5 x 12.5 x 6 (mm) B82477P2 IN TCF PMD A
Series/Type: Ordering code: Date: May 2009 Version: 02 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color
More informationAluminum Electrolytic Capacitors: SMD
Aluminum Electrolytic Capacitors: SMD Series/Type: The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last
More informationSMT power inductors. Size (mm) Date: June 2012
Size 12.8 12.8 8.0 (mm) Series/Type: a~í~=püééí Date: June 2012 EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationSMT power inductors. Size (mm) Date: June 2012
Size 6.1 5.6 4.9 (mm) Series/Type: Data Sheet Date: June 2012 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationPTC thermistors for overcurrent protection
PTC thermistors for overcurrent protection Series/Type: B599*5 Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More informationSMT power inductors. Size (mm) Date: June 2012
Size.4. 5.8 (mm) Series/Type: a~í~=püééí Date: June 212 EPCOS AG 215. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS'
More informationSMT power inductors. Size (mm) Date: June 2012
Size 6.0 6.0 3.0 (mm) Series/Type: Data Sheet Date: June 2012 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationPTC thermistors for overcurrent protection
PTC thermistors for overcurrent protection Series/Type: B598** Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More informationSMT power inductors. Size (mm) Date: June 2012
Size 12.95 9.4 5.08 (mm) Series/Type: a~í~=püééí Date: June 2012 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationSMT power inductors. Size 6.0 x 6.0 x 2.5 (mm) Series/Type:
Series/Type: The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments * 2012-03-16 2012-09-28 2013-03-29
More informationData Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008
Aluminum electrolytic capacitors Alu-X product lines Snap-in capacitors Series/Type: Data Sheet Date: April 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information
More informationSMT power inductors. Size (mm) Series/Type: B82464P4 Date: June 2012 Version: 2
Size 10.4 10.4 4.8 (mm) Series/Type: Date: June 2012 Version: 2 a~í~=püééí EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More informationSMT power inductors. Size (mm) Date: June 2012
Size 12.3 12.3 6.0 (mm) Series/Type: a~í~=püééí Date: June 2012 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement, pipe mounted sensors Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the
More informationPower Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
More informationData Sheet. Aluminum electrolytic capacitors Alu-X product lines. Single-ended capacitors. Date: August 2008
Aluminum electrolytic capacitors Alu-X product lines Single-ended capacitors Series/Type: Data Sheet Date: August 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and
More informationSMT power inductors. Size (mm) Date: June 2012
Size 18.54 15.24 7.11 (mm) Series/Type: a~í~=püééí Date: June 2012 EPCOS G 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationPolymer Chip Capacitor
Polymer Chip Capacitor TOPcap Basic Series/Type: Date: June 2005 Version: 1 Content of inside pages of data sheet. Data will be automatically entered into headers and footers. Plea customer pdf. Identification/Classification
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement Miniature sensors with bendable wires Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement Miniature sensors with bendable wires Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures
More informationSMT power inductors. Size (mm) Series/Type: B82464P4 Date: April 2015
Size 10.4 10.4 4.8 (mm) Series/Type: Date: April 2015 a~í~=püééí EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationData Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008
Aluminum electrolytic capacitors Alu-X product lines Snap-in capacitors Series/Type: Data Sheet Date: April 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information
More informationSMT power inductors. Size (mm) Date: July 2017
Size 12.5 12.5 8.5 (mm) Series/Type: a~í~=püééí Date: July 2017 EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationFilm capacitors - AC capacitors Motor run capacitors
Film capacitors - AC capacitors Motor run capacitors Series/Type: B32328 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline
More information250 V; class B; 85 C / 400 V; class B; 85 C / 480 V; class C; 85 C
250 V; class B; 85 C / 400 V; class B; 85 C / 480 V; class C; 85 C Series/Type: Ordering code: Date: January 2008 Version: 2.0 Content of inside pages of data sheet. Data will be automatically entered
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationFilm capacitors AC capacitors
Film capacitors AC capacitors Series/Type: The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments
More informationMultilayer ceramic capacitor
Multilayer ceramic capacitor Series/Type: Chip Ordering code: B37921... Date: 2005-12-05 Content of inside pages of data sheet. Data will be automatically entered into headers and footers. Please fill
More informationFilm capacitors Power electronic capacitors
Series/Type: Ordering code: Date: July 2008 Version: 2 Identification/Classification 1 (header 1 + top left bar): Identification/Classification 2 (header 2 + bottom left header bar): Ordering code: (top
More informationFilm Capacitors Power Factor Correction
Series/Type: Ordering code: Date: August 2010 Version: 5 entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible)
More informationPower Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
More informationFilm Capacitors Power Factor Correction
Series/Type: Ordering code: Date: June 2012 Version: 3 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color
More informationFilm Capacitors Power Factor Correction
Series/Type: Ordering code: Date: August 2010 Version: 5 entered in headers and footers! Please fill in the Don't change formatting when entering or pasting text in the table and don't add any cell or
More informationAluminum electrolytic capacitors
Aluminum electrolytic capacitors Capacitors with 4-pin snap-in terminals and solder pins Series/Type: Date: December 2006 EPCOS AG 2007. Reproduction, publication and dissemination of this publication,
More informationFilm Capacitor. B3292xxxx. Film R&D
Film Capacitor Series/Type: Ordering code: B32922C3334M 250&255 Date: 2015-04-23 Version: a Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill
More information%BUB4IFFU. 3-line sine-wave EMC output filters for converters and power electronics SineFormer 520 V AC, A, 40 C. Date: November 2007
3-line sine-wave EMC output filters for converters and power electronics SineFormer 520 V AC, 11... 320 A, 40 C Series/type: %BUB4IFFU Date: November 2007 EPCOS AG 2007. Reproduction, publication and dissemination
More informationFilm capacitors Power Factor Correction
Series/Type: Ordering code: Date: July 2012 Version: 9 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color
More informationFilm Capacitors Power Factor Correction
Series/Type: Ordering code: J30/J110/N30/N110 Date: July 01 Version: 11 Content of header bars 1 and of data sheet will be automatically entered in headers and footers! Please fill in the table and then
More informationSMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
More informationSMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
More informationFilm capacitors Power Factor Correction
Series/Type: Ordering code: Date: June 2012 Version: 3 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color
More informationFilm Capacitors - Power Factor Correction
Series/Type: B44066S****J0/J30 Ordering code: Date: February 08 Version: Content of header bars and of data sheet will be automatically entered in headers and footers! Please fill in the table and then
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationPOWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION
FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable
More informationPower Factor Correction
Thyristor module Series/Type: Ordering code: Date: January 2018 Version: 2 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and
More informationAluminum electrolytic capacitors
Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type: Date: October 2007 EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
More informationPhaseCap HD Capacitors for Power Factor Correction
Series/Type: Ordering code: Date: 2005-12-14 Version: 3 Content of inside pages of data sheet. Data will be automatically entered into frontpage headlines, headers and footers. Please fill in the table
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More informationEMC Filters. The following products presented in this data sheet are being withdrawn.
EMC Filters Series/Type: B84299K0061 The ollowing products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date o Withdrawal B84113H*, B84115E*, B84143B*R* B84113H*,
More informationCGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationEPCOS Product Profile Power Capacitors. for Industrial Applications and Renewable Energy.
EPCOS Product Profile 2012 Power Capacitors for Industrial pplications and Renewable Energy www.tdk-epc.com Welcome to the World of Electronic Components, Modules and Systems EPCOS is a leading manufacturer
More informationData sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
More informationSMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
More informationC Series Mid Voltage Application
C Series Mid Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More informationRM 8. To IEC Cores without center hole for transformer applications Delivery mode: sets. Magnetic characteristics (per set) with center hole
Core B65811 To IEC 62317-4 Cores without center hole for transformer applications Delivery mode: sets Magnetic characteristics (per set) with center hole without center hole l/a l e A e A min V e 0.68
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationSMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
More informationSIOV metal oxide varistors
SIOV metal oxide varistors Strap varistors, Series/Type: B722* Date: April 2011 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More informationCapacitors for Power Electronics
Capacitors for Power Electronics Series/Type: B2536* The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationMCF3 DC86V11CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: Cover: Terminal substrate metal: Terminal primary plating: Terminal surface plating: Adhesive: Marking: Ceramic Ceramic Copper t=0.1 mm Nickel plated copper,
More informationSMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
More informationInductors for High-frequency Circuits
Inductors for High-frequency Circuits Multilayer/STD MLG series Type: MLG0603S MLG1005S MLG1608 0603[0201 inch]* 1005[0402 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 Conformity
More informationMetallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
More informationMCF3 25CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin
More informationReference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
More informationPower Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
More informationFilm capacitors Power electronic capacitors
MKP PEC DC Series/Type: B2562* Ordering code: Date: June 2010 Version: 3.2 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and
More informationAfter 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
More informationJuly terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 215 3-terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA] (1/4) 3-terminal Filters For Large-current Power
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
More informationSRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
More information1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
More informationFilm Capacitors Power Electronic Capacitors
Series/Type: Ordering code: Date: October 2009 Version: 4 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationWire Wound Chip Inductor Ferrite
Applications: Features: Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More informationThin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] 3,25 ±0,15 1,3 ±0,15 1 2 3,25 ±0,15 Recommended Land Pattern: [mm] 4,0 3,25 0,48 1,3 0,5 3,25 Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationThin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
More informationSMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationWL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
More informationWire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationWLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationJapan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
More information