Hot Drink Center Parts Manual List of Figures

Transcription

1

2 List of Figures Figure Title...Page 1. Hot Drink Center Merchandiser Trim Components Trim - Millennia Style (Part 1 of 3) Trim - Millennia Style (Part 2 of 3) Trim - Millennia Style (Part 3 of 3) - Monetary and Button Assembly Trim - Superior Full P.O.P Door Assembly (Part 1 of 2) Door Assembly (Part 2 of 2) Miscellaneous Mounted Parts - Door Assembly Superior Style - Full P.O.P. - Door Assembly - Interior Coin Receptacle Assemblies Door Lock Assembly Door Lock and Handle Assembly - Standard Trim and Superior Full POP Style Millennia Door Lock and Handle Assembly Automatic Delivery Door Fluorescent Lamp Assembly and Ballast (Standard and Millennia Styles) Display Assembly - Part 1 of 2 (Standard and Millennia Style) Display Assembly - Part 2 of Door Hinge Assemblies Mech and Canister Assembly - 11 Column Turret and Canister Assembly - 4 Column Turret and Canister Assembly - 7 Column Mechanism Assembly Cup Ring Assembly Actuator Assembly - Cup Ring Mounting Bracket Assembly - Right Cabinet Assembly - Outer Layer Cabinet Assembly - Inner Layer Cabinet Assembly - Miscellaneous Mounted Parts Leg, Leveler, and Leg and Hinge Assemblies Cup Delivery Assembly Cup Station Support, Overflow Switch, and Cup Sensor Overflow Switch Assembly Filter Paper Housing and Cover Service Light/Bracket Assembly - U.S Service Light/Bracket Assembly (ARG./AUS./FR./GER./N.Z./SP./U.K.) Air Compressor Assembly - U.S Air Compressor Assembly (ARG./US./FR./GER./S.A./SP./U.K.) Monetary Panel Assembly (Part 1 of 3) Monetary Panel Assembly (Part 2 of 3) Monetary Panel Assembly (Part 3 of 3) Monetary Inserts - Upper Position Monetary Inserts - Lower Position Card Reader and Bill Validator Options Monetary Channel Power Panel Assembly (Brazil/U.S.) Power Panel Assembly - ARG./AUS./N.Z./U.K i

3 Figure Title Page 48. Power Panel Assembly (FR./GER./S.A./SP.) Power Panel Assembly (MEX.) Single Brewer Assembly (No Filter) Single Brewer Assembly (With Filter) Dual Brewer Assembly (No Filter) Dual Brewer Assembly (With Filter) Barrel Assembly - Single Brewer Barrel Assembly - Dual Brewer Rack Assembly - Single Brewer Rack Assembly - Dual Brewer Paper Mechanism Assembly - Single Brewer Paper Mechanism Assembly - Dual Brewer Brewer Drive Assembly Brewer Exhaust Filter Locator and Bracket Assembly Mixing Bowl Ventilation Assembly Rear Vent Assemblies Bracket, Blower, and Cover Assembly Front Vent Assemblies Water Supply - With Everpure Water Filter Option Water Supply - With Cuno Water Filter Option Water Supply - With Hydrolife Option Water Supply - Without Water Filter Option Hot Water Tank Assembly Water Tank Lid Assembly Valve Assembly - Hot Water Tank Bean Window Assemblies Dual Bean Window Assembly Single Bean Window Assembly - U.S Single Bean Window Assembly - ARG./AUS./FR./N.A./S.A./SP./U.K Canister Usage Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Grinder and Bracket Assembly - Bean Grinder Asembly - Bean Canister Support Channel Assembly Regulator Assembly Mixing Bowl and Whipper Positions Mixing Bowl and Whipper Assemblies Canister Motor and Plate Assemblies Product and Condiment Chutes (Part 1 of 2) Product and Condiment Chutes (Part 2 of 2) Overall Wiring Harnesses ii

4 Figure Title Page 101. Power Panel Wiring Harnesses Liquid Distribution and Drain System (Part 1 of 2) Liquid Distribution and Drain System (Part 2 of 2) Base Plate Accessory - Standard Style Base Plate Accessory - Millennia Style Ingredient Drain Tray Accessory Door Lock Guard Accessory iii

5 NOTES... iv

6 List of Tables Table Title Page 1. Hot Drink Center Merchandiser Trim Components A. Top Trim Panel (Index Number 5) B. Right Hand Trim Panel (Index Number 11) C. Right Center Trim Panel (Index Number 12) D. Bottom Trim Panel (Index Number 15) E. Left Center Trim Panel (Index Number 17) F. Left Hand Trim Panel (Index Number 18) G. Trim Components By Style Trim - Millennia Style (Part 1 of 3) Trim - Millennia Style (Part 2 of 3) Trim - Millennia Style (Part 3 of 3) - Monetary and Button Assembly Trim - Superior Full P.O.P Door Assembly (Part 1 of 2) Door Assembly (Part 2 of 2) Miscellaneous Mounted Parts - Door Assembly Superior Style - Full P.O.P. - Door Assembly - Interior Coin Receptacle Assemblies Door Lock Assembly Door Lock and Handle Assembly - Standard Trim and Superior Full POP Style Millennia Door Lock and Handle Assembly Automatic Delivery Door Fluorescent Lamp Assembly and Ballast (Standard and Millennia Styles) Display Assembly - Part 1 of 2 (Standard and Millennia Style) Display Assembly - Part 2 of Door Hinge Assemblies Mech and Canister Assembly - 11 Column Turret and Canister Assembly - 4 Column Turret and Canister Assembly - 7 Column Mechanism Assembly Cup Ring Assembly Actuator Assembly - Cup Ring Mounting Bracket Assembly - Right Cabinet Assembly - Outer Layer Cabinet Assembly - Inner Layer Cabinet Assembly - Miscellaneous Mounted Parts Leg, Leveler, and Leg and Hinge Assemblies Cup Delivery Assembly Cup Station Support, Overflow Switch, and Cup Sensor Overflow Switch Assembly Filter Paper Housing and Cover Service Light/Bracket Assembly - U.S Service Light/Bracket Assembly (ARG./AUS./FR./GER./N.Z./SP./U.K.) Air Compressor Assembly - U.S Air Compressor Assembly (ARG./US./FR./GER./S.A./SP./U.K.) Monetary Panel Assembly (Part 1 of 3) Monetary Panel Assembly (Part 2 of 3) v

7 Table Title Page 41. Monetary Panel Assembly (Part 3 of 3) Card Reader and Bill Validator Options A. Monetary Location Options B. Coin Mech Options - Dumb C. Coin Mech Options - MDB D. Bill Validator Options - Serial E. Bill Validator Options - Pulse F. Bill Validator Options - Mdb G. Card Readers Monetary Channel Power Panel Assembly (Brazil/U.S.) Power Panel Assembly - ARG./AUS./N.Z./U.K Power Panel Assembly (FR./GER./S.A./SP.) Power Panel Assembly (MEX.) Single Brewer Assembly (No Filter) Single Brewer Assembly (With Filter) Dual Brewer Assembly (No Filter) Dual Brewer Assembly (With Filter) Barrel Assembly - Single Brewer Barrel Assembly - Dual Brewer Rack Assembly - Single Brewer Rack Assembly - Dual Brewer Paper Mechanism Assembly - Single Brewer Paper Mechanism Assembly - Dual Brewer Brewer Drive Assembly Brewer Exhaust Filter Locator and Bracket Assembly Mixing Bowl Ventilation Assembly Rear Vent Assemblies A. Available Assemblies Bracket, Blower, and Cover Assembly Front Vent Assemblies A. Available Assemblies Water Supply - With Everpure Water Filter Option Water Supply - With Cuno Water Filter Option Water Supply - With Hydrolife Option Water Supply - Without Water Filter Option Hot Water Tank Assembly Water Tank Lid Assembly Valve Assembly - Hot Water Tank Bean Window Assemblies Dual Bean Window Assembly Single Bean Window Assembly - U.S Single Bean Window Assembly - ARG./AUS./FR./N.A./S.A./SP./U.K Canister Usage Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly vi

8 Table Title Page 87. Canister Assembly Canister Assembly Canister Assembly Canister Assembly Grinder and Bracket Assembly - Bean Grinder Asembly - Bean Canister Support Channel Assembly Regulator Assembly Mixing Bowl and Whipper Positions Mixing Bowl and Whipper Assemblies Canister Motor and Plate Assemblies A. Motor Position Usage V B. Motor Position Usage V Product Delivery Chute Assembly Usage A. Delivery Chute Parts B. Delivery Chute Parts C. Delivery Chute Parts D. Delivery Chute Parts E. Delivery Chute Parts F. Delivery Chute Parts G. Delivery Chute Parts Overall Wiring Harnesses Power Panel Wiring Harnesses Liquid Distribution and Drain System (Part 1 of 2) A. Usage Key For Bulk Tubing Liquid Distribution and Drain System (Part 2 of 2) A. Bulk Tubing For Interconnecting Water Valves, Mixing Bowls, And Dispensing Spouts Base Plate Accessory - Standard Style Base Plate Accessory - Millennia Style Ingredient Drain Tray Accessory Door Lock Guard Accessory Money Box lock accessory Bag Assembly U.s., Canada, Brazil 115v, Can-can Bag Assembly U.K Bag Assembly France Bag Assembly Germany Bag Assembly Spain Bag Assembly Australia (637 Only) / New Zealand Bag Assembly V Brazil (Model 633 Only) Bag Assembly Sweden Bag Assembly Mexico / El Salvador Bag Assembly Singapore Bag Assembly Argentina Bag Assembly Mexico vii

9 NOTES... viii

10 CRANE NATIONAL VENDORS Hot Drink Center Parts Manual TABLE 1. HOT DRINK CENTER MERCHANDISER INDEX PART NUMBER DESCRIPTION QTY 1 - CABINET ASSEMBLY (FIGURES 27, 28, 29) DOOR ASSEMBLY (FIGURES 7, 8) BASE PLATE ASSEMBLY (FIGURES 104, 105) OPT. G OOD VALUE 1 X Y Z p0055 Figure 1. Hot Drink Center Merchandiser

11 Figure 2. Trim Components

12 TABLE 2. TRIM COMPONENTS INDEX PART NUMBER DESCRIPTION QTY 1 - TRIM - DOOR - TOP AND BOTTOM (TABLE 2G) TRIM INSERT - BLACK (TABLE 2G) TRIM - DOOR - HORIZONTAL - MIDDLE (TABLE 2G) TRIM INSERT - BLACK - MIDDLE (TABLE 2G) PANEL - TOP TRIM (TABLE 2A) TRIM - DOOR SIDE TRIM - VERTICAL CASTING - MONETARY FRAME - BLACK SCREW #6-32 X 1/4 PHS, T/C, PHILLIPS TRIM - HORIZONTAL - GLASS FRAME - CUP DELIVERY DOOR TRIM PANEL - CENTER - RIGHT (TABLE 2C) TRIM PANEL - RIGHT HAND (TABLE 2B) TRIM - COIN CUP - BLACK TRIM - FILLER TRIM PANEL - BOTTOM (TABLE 2D) EDGE PROTECTOR TRIM - DOOR - HORIZONTAL - LOWER (TABLE 2G) TRIM INSERT - LOWER (TABLE 2G) TRIM PANEL - CENTER - LEFT (TABLE 2E) TRIM PANEL - LEFT HAND (TABLE 2F) T-BOLT - TRIM - 3/8" (NOT SHOWN) T-BOLT - TRIM - 1/2" (NOT SHOWN) 7 TABLE 2A. TOP TRIM PANEL (INDEX NUMBER 5) PART NUMBER PRESIDENTIAL WALNUT SPECIAL FORMICA TEAK VINYL SPECIAL VINYL BLACK HAIRCELL NU-WHITE STERLING VINYL WHITE HAIRCELL DOVE GREY SLATE BLACK PICA DESCRIPTION

13 TABLE 2B. RIGHT HAND TRIM PANEL (INDEX NUMBER 11) PART NUMBER STERLING BLACK HAIRCELL BLACK PICA COMPOSTITION OAK DOVE GREY LAMINATE NU WHITE PEWTER PORT AU PRINCE PRESIDENTIAL WALNUT SLATE TEAK SPECIAL VINYL WHITE HAIRCELL DESCRIPTION TABLE 2C. RIGHT CENTER TRIM PANEL (INDEX NUMBER 12) PART NUMBER DESCRIPTION STERLING DOVE GREY NUWHITE TEAK WHITE HAIRCELL TABLE 2D. BOTTOM TRIM PANEL (INDEX NUMBER 15) PART NUMBER DESCRIPTION STERLING - DEBIT/VER - NO COIN MECH STERLING BISON BLACK BLACK HAIRCELL BLACK PICA BLANK COMPOSITION OAK DOVE GREY LAMINATE NU WHITE PEWTER PRESIDENTIAL WALNUT SLATE TEAK SPECIAL VINYL WHITE HAIRCELL

14 TABLE 2E. LEFT CENTER TRIM PANEL (INDEX NUMBER 17) PART NUMEBR STERLING DOVE GREY NU-WHITE TEAK WHITE HAIRCELL DESCRIPTION TABLE 2F. LEFT HAND TRIM PANEL (INDEX NUMBER 18) PART NUMBER PORT-AU-PRINCE COMPOSITION OAK PRESIDENTIAL WALNUT STERLING DOVE GREY NU-WHITE TEAK BLANK LAMINATE PEWTER SPECIAL VINYL SLATE WHITE HAIRCELL BLACK HAIRCELL BLACK PICA MOROCCO GREY DESCRIPTION TABLE 2G. TRIM COMPONENTS BY STYLE INDEX (TABLE 2) TRIM COMPONENT PART NUMBER BY STYLE IMPERIAL CROWN SIGNATURE SERIES ARA VETERAN S ADMIN. IMPERIAL CROWN - SUPERIOR SIGNATURE - SUPERIOR CAN CAN (BELT)

15 Figure 3. Trim - Millennia Style (Part 1 of 3)

16 TABLE 3. TRIM - MILLENNIA STYLE (PART 1 OF 3) INDEX PART NUMBER DESCRIPTION QTY DOOR WELD ASSEMBLY - BLACK DOOR WELD ASSEMBLY - SELECTA WHITE FILLER - GROOVE - SHORT FILLER - GROOVE - SHORT - SELECTA WHITE RIGHT PANEL - MONETARY & BUTTON ASSEMBLY (FIGURE 5) RIGHT HAND TRIM - LOWER - "B DECAL - DOOR TRIM - VERTICAL ASSEMBLY TRIM - UPPER - LEFT HAND - "C" LEFT HAND TRIM - UPPER - SELECTA WHITE TRIM - MIDDLE - LEFT HAND - "D" LEFT HAND TRIM - MIDDLE - SELECTA WHITE TRIM - BOTTOM - LEFT HAND - "E" LEFT HAND TRIM - BOTTOM - SELECTA WHITE TRIM - LOWER - DOOR SIDE - GRAY TRIM - LOWER - DOOR SIDE - SELECTA WHITE

17 Figure 4. Trim - Millennia Style (Part 2 of 3)

18 TABLE 4. TRIM - MILLENNIA STYLE (PART 2 OF 3) INDEX PART NUMBER DESCRIPTION QTY HORIZONTAL TRIM - TOP - 38" - "H HORIZONTAL TRIM - TOP SELECTA WHITE DECAL - DOOR TRIM - HORIZONTAL - 38" (NOT SHOWN) (USED WITH INDEX 1) GLASS - CURVED FRONT " - H.D.C GASKET - GLASS HORIZONTAL TRIM PANEL - BOTTOM TRIM - GRAY PANEL - BOTTOM TRIM - SELECTA WHITE

19 Figure 5. Trim - Millennia Style (Part 3 of 3) - Monetary and Button Assembly

20 TABLE 5. TRIM - MILLENNIA STYLE (PART 3 OF 3) - MONETARY AND BUTTON ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY R.H. TRIM - UPPPER - "A ARRAY - PUSH BUTTON SELECTION SPRING - PUSH BUTTON SELECTION PLATE - STOP BUTTON RETAINER - RETURN BUTTON COIN RETURN BUTTON - "A SPACER CUP EXTENSION - COIN INSERT COIN BLOCK COIN INSERT - "A

21 Figure 6. Trim - Superior Full P.O.P

22 TABLE 6. TRIM - SUPERIOR FULL P.O.P. INDEX PART NUMBER DESCRIPTION QTY TRIM - DOOR - HORIZONTAL - BLACK TRIM - DOOR - SIDE - BLACK CASTING - MONETARY FRAME - BLACK TRIM - COIN CUP - BLACK EDGE PROTECTOR - BOTTOM PHOTO POP - DOOR - SUPERIOR FRAME - CUP DELIVERY DOOR LENS - SELECTION INSERT FRAME - PRODUCT IDENTIFIER

23 TABLE 7. DOOR ASSEMBLY (PART 1 OF 2) INDEX PART NUMBER DESCRIPTION QTY 1 - FLUORESCENT LAMP ASSEMBLY AND BALLAST (FIGURE 16) MECH AND CANISTER ASSEMBLY (FIGURE 20) DELIVERY DOOR (FIGURE 15) - Figure 7. Door Assembly (Part 1 of 2)

24 TABLE 8. DOOR ASSEMBLY (PART 2 OF 2) INDEX PART NUMBER DESCRIPTION QTY 1 - DISPLAY ASSEMBLY (FIGURES 17, 18) DOOR LOCK AND HANDLE ASSEMBLY (FIGURES 13, 14) COIN RECEPTACLE ASSEMBLY (FIGURE 11) TRIM COMPONENTS (FIGURE 2) WELD ASSEMBLY - DOOR WELD 1 Figure 8. Door Assembly (Part 2 of 2)

25 Figure 9. Miscellaneous Mounted Parts - Door Assembly

26 TABLE 9. MISCELLANEOUS MOUNTED PARTS - DOOR ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY LIFT BRACKET - CUP STATION HANGER - CUP STATION BRACKET - DOOR SUPPORT FILLER STRIP - SANITATION

27 Figure 10. Superior Style - Full P.O.P. - Door Assembly - Interior

28 TABLE 10. SUPERIOR STYLE - FULL P.O.P. - DOOR ASSEMBLY - INTERIOR INDEX PART NUMBER DESCRIPTION QTY DOOR WELD ASSY - PAINTED TURRET & CSTR ASSY - 4 COL TURRET & CSTR ASSY - 7 COL BOLT - #1/4 X 20 X 2.38 HHS WASHER 5/8 X.265 X.048 ZINC/YEL SPACER -.227ID X.375OD X FUNNEL CUP DIAMETER MECHANISM ASSY - 11 COLUMN CENTER PLATE & TRIM ASSY - STERL FILLER STRIP - SANITATION BRACKER - DOOR SUPPORT HANGER CUP STATION

29 Figure 11. Coin Receptacle Assemblies

30 TABLE 11. COIN RECEPTACLE ASSEMBLIES INDEX PART NUMBER DESCRIPTION QTY SPACER - CUP SCREW - #8-18 X 1/2 - PHS - TAPPING CUP - COIN RETURN GATE - COIN RETURN SPRING - COIN RETURN DOOR SHAFT - DOOR - COIN RETURN

31 Figure 12. Door Lock Assembly

32 TABLE 12. DOOR LOCK ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY 1 - DOOR LOCK AND HANDLE ASSEMBLY (FIGURES 13, 14) LOCK BAR ASSEMBLY SCREW GUIDE - LOCK BAR

33 Figure 13. Door Lock and Handle Assembly - Standard Trim and Superior Full POP Style

34 TABLE 13. DOOR LOCK AND HANDLE ASSEMBLY - STANDARD TRIM AND SUPERIOR FULL POP STYLE INDEX PART NUMBER DESCRIPTION QTY LEVER - LOCK LEVER - LOCK - BLACK (SUPERIOR FULL P.O.P. STYLE) PIVOT - LEVER LOCK BASE - LEVER LOCK BASE - LEVER LOCK - BLACK (SUPERIOR FULL P.O.P. STYLE) ACTUATOR ASSEMBLY - LOCK BAR CUP SPACER SCREW #10-32 X 1/2 RHS W/LW SHIELD - LATCH WASHER - STEEL - 7/16 X.203 X CATCH - DOOR LATCH LATCH - LOCK LOWER CYLINDER - LOCK - FLEX ACE CYLINDER - LOCK - VAN OPT KEY - VAN LOCK (NOT SHOWN) OPT GENERIC KEY - FLEX ACE (NOT SHOWN)

35 Figure 14. Millennia Door Lock and Handle Assembly

36 TABLE 14. MILLENNIA DOOR LOCK AND HANDLE ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY LEVER - HANDLE RETAINING RING - LOCK ACTUATOR ROLL PIN 1/8 X 1 1/ BASE - LOCK HANDLE SPRING - LOCK ACTUATOR - LOCK BAR SPRING - LIFT - ACTUATOR

37 Figure 15. Automatic Delivery Door

38 TABLE 15. AUTOMATIC DELIVERY DOOR INDEX PART NUMBER DESCRIPTION QTY HARNESS - AUTO DOOR (NOT SHOWN) (TABLE 100) RETAINER - HARNESS (NOT SHOWN) GEAR - TRAY COUPLING - SPIRAL SWITCH MOTOR AND PCB ASSEMBLY COVER - MOTOR - VEND DOOR TRACK - GEAR RACK TRACK - VEND DOOR STOP - VEND DOOR SPOOL - SPRING DOOR - VEND SPRING - VEND DOOR SHAFT - SPOOL SPRING COVER AIR GAP PLATE ASSEMBLY - RACK RACK - BREWER HOUSING - SPRING BRACE - CUP MECH

39 P0050 Figure 16. Fluorescent Lamp Assembly and Ballast (Standard and Millennia Styles)

40 TABLE 16. FLUORESCENT LAMP ASSEMBLY AND BALLAST (STANDARD AND MILLENNIA STYLES) INDEX PART NUMBER DESCRIPTION QTY 1 - MOUNTING HARDWARE SUPPRESSION NETWORK ASSEMBLY (BRZ/MEX/US) JUMPER - FILTER AND FLUORESCENT LIGHT NOT USED IN THIS APPLICATION NOT USED IN THIS APPLICATION BALLAST ASSEMBLY WATT (BRZ./MEX/U.S.) BALLAST ASSY - 18 WATT (ARG./AUS./FR./GER./N.Z./S.A./SP./U.K.) MOUNTING HARDWARE LIGHT BRACKET ASSEMBLY (INCLUDES INDEX NUMBERS 9-11, AND 16) HARNESS - FLUORESCENT LAMP BRACKET - LIGHT TUBE SCREW #4-36 X.437 RHS FLUORESCENT LAMP STARTER FLUORESCENT LAMP END CAP - SLEEVE SAFETY SLEEVE - LAMP SCREW #4-36 X 5/8 RHS

41 Figure 17. Display Assembly - Part 1 of 2 (Standard and Millennia Style)

42 TABLE 17. DISPLAY ASSEMBLY - PART 1 OF 2 (STANDARD AND MILLENNIA STYLE) INDEX PART NUMBER DESCRIPTION QTY MOUNT - DISPLAY - LEFT PANEL ASSEMBLY - DISPLAY (INCLUDES INDEX NUMBERS 13 THOUGH 16 AND 19) (FIGURE 18) OVERLAY - LARGE CUP FILLER-FRAME TRIM - HORIZONTAL - GLASS MOUNT - DISPLAY - RIGHT COVER PLATE ASSEMBLY GLASS - DISPLAY DISPLAY - PANEL - POLYCARBONATE CHANNEL - GLASS - VERTICAL CHANNEL - GLASS - HORIZONTAL

43 Figure 18. Display Assembly - Part 2 of

44 TABLE 18. DISPLAY ASSEMBLY - PART 2 OF 2 INDEX PART NUMBER DESCRIPTION QTY PANEL - DIPLAY - PRODUCT LABEL - FRESHLY GROUND AND BREWED (637 ONLY) (U.S.) LABEL - FRESHLY GROUND AND BREWED (637 ONLY) (MEXICO) FRAME - PRODUCT IDENTIFIER LABEL - INSTRUCTION AND CUP SIZE (BRZ./U.S.) LABEL - INSTRUCTIONS AND CUP SIZE (AUS./NZ./U.K.) LABEL - INSTRUCTIONS AND CUP SIZE (GER.) LABEL - INSTRUCTIONS AND CUP SIZE (MEX./SP.) LABEL - INSTRUCTIONS AND CUP SIZE (ARG.) LABEL - INSTRUCTIONS AND CUP SIZE (FR.) - SELECTION INSERTS (SEE BAG ASSEMBLY TABLE) MENU INSERT BOARD - SUPERIOR (USED WITH FULL DOOR P.O.P.) SELECTION INSERT - SUPERIOR (USED WITH SIGNATURE/IMPE- RIAL CROWN TRIM) DISPLAY - PHOTO - POINT OF PURCHASE CUSTOMER SUPPLIED P.O.P. - VETERAN S ADMIN CUSTOMER SUPPLIED P.O.P. - CAN-CAN BEAN WINDOW FILLER (653 AND 655 ONLY) BEAN WINDOWN FILLER (633 & 635) GERMANY

45 Figure 19. Door Hinge Assemblies

46 TABLE 19. DOOR HINGE ASSEMBLIES INDEX PART NUMBER DESCRIPTION QTY SCREW - 5/16-18 X.75 FLT.HD SOCKET WELD SCREW - #1/4-20 X 1" LONG PLATE ASSEMBLY - HINGE MOUNTING /4-KEPS NUT EXT LW ZP HINGE ASSEMBLY - DOOR - LOWER HINGE ASSEMBLY - DOOR - LOWER - SELECTA WHITE BEARING - THRUST - LOWER HINGE

47 Figure 20. Mech and Canister Assembly - 11 Column

48 TABLE 20. MECH AND CANISTER ASSEMBLY - 11 COLUMN INDEX PART NUMBER DESCRIPTION QTY 1 - BOLT MECH AND CANISTER ASSEMBLY (INCLUDES INDEX NUMBERS 3 THROUGH 9) TURRET AND CANISTER ASSEMBLY - 4 COLUMN (FIGURE 21) TURRET AND CANISTER ASSEMBLY - 7 COLUMN (FIGURE 22) BOLT - #1/4 X 20 X /8 X.265 X.048 WASHER - ZINC SPACER ID X MECHANISM ASSEMBLY (FIGURE 23) FUNNEL "

49 Figure 21. Turret and Canister Assembly - 4 Column

50 TABLE 21. TURRET AND CANISTER ASSEMBLY - 4 COLUMN INDEX PART NUMBER DESCRIPTION QTY TURRET AND CANISTER ASSEMBLY - 4 COLUMN REF LID - CANISTER WASHER PLATE NUT - #8-32 KEPS SCREW - #8-32 X BEARING TURRET SPACER CUP TURRET ASSEMBLY 1B (INCLUDES INDEX NUMBER 8 AND 9) TURRET CENTER BASE - TURRET CANISTER - CUP STRAP - CANISTER LABEL - FILL LINE

51 Figure 22. Turret and Canister Assembly - 7 Column

52 TABLE 22. TURRET AND CANISTER ASSEMBLY - 7 COLUMN INDEX PART NUMBER DESCRIPTION QTY TURRET AND CANISTER ASSEMBLY - 7 COLUMN REF TURRET ASSEMBLY 1A (INCLUDES INDEX NUMBERS 2 AND 3) TURRET CENTER BASE - TURRET CANISTER - CUP LID - CANISTER SCREW - #8-32 X BEARING TURRET WASHER PLATE NUT - #8-32 KEPS TURRET ASSEMBLY 1B (INCLUDES INDEX NUMBERS 11 AND 12) TURRET CENTER BASE - TURRET STRAP - CANISTER LABEL - FILL LINE

53 Figure 23. Mechanism Assembly

54 TABLE 23. MECHANISM ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY MECHANISM ASSEMBLY - 11 COLUMN REF PCB ASSEMBLY - DETECTOR - CUP SENSOR COVER - CENTER - MOTOR COVER AND LED ASSEMBLY (INCLUDES INDEX NUMBERS 32 THROUGH 34) BOLT - #1/4 X 20 X 2.38 HHS SCREW - #8-32 X.31 HEX T.F. - BLACK COVER - END GROMMET - STRAIN RELIEF HARNESS - CUP MECHANISM BASE PLATE - 11 COLUMN NUT - 1/4 20 SELF LOCKING BUSHING BRACKET - MECHANISM MOUNTING - LEFT SCREW - 1/4 X 20 X.5 HEX HD WASHER RETAINER HARNESS X.81 HHSI TAPTITE WASHER - STEEL 3/8 X.170 X MOTOR AND CRANK ARM ASSEMBLY (INCLUDES INDEX NUM- BERS 21 THROUGH 23) SCREW - #8-16 X.38 PLASTIC HHS MOTOR AND PCB ASSEMBLY CRANK ARM AND ROLLER ASSEMBLY MOTOR AND PCB ASSEMBLY RETAINING RING - E TYPE ACTUATOR ASSEMBLY - CUP RING (FIGURE 25) CUP RING ASSEMBLY (FIGURE 24) PLATE - CUP RING MOUNTING MOUNTING BRACKET ASSEMBLY - RIGHT (FIGURE 26) /4-20 X 3/4 HEX HEAD BOLT ZIP SPACER ID X.34OD X INDEX PLATE - GENEVA DRIVER - GENEVA COVER - CENTER HARNESS - CUP DETECT/LED JUMPER PCB ASSEMBLY - LED - CUP SENSOR SPRING - CUP RELEASE ARM (NOT SHOWN)

55 TABLE 24. CUP RING ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY NUT #8-32 SELF LOCKING SCREW - #8-16 X 1.25 PHS - PLASTITE HOUSING - CUP RING WASHER ROLLER ADJUSTER RING - INTERNAL SCREW #8-32 X.50 PHS W/LW CAM & GEAR ASSEMBLY RETAINER - CAM CAM - CUP - UNIVERSAL GEAR - 18 TOOTH GEAR - 10 TOOTH ARM - CAM WASHER - PAPER MECH GEAR RING - INTERNAL HOUSING - CUP RING p0046 Figure 24. Cup Ring Assembly

56 TABLE 25. ACTUATOR ASSEMBLY - CUP RING INDEX PART NUMBER DESCRIPTION QTY ACTUATOR ASSEMBLY - CUP RING REF SCREW - #8-32 X.31 HEX HD T.F. - BLACK RAMP - ACTUATOR CAM - ACTUATOR ACTUATOR - CUP RING 1 Figure 25. Actuator Assembly - Cup Ring

57 Figure 26. Mounting Bracket Assembly - Right

58 TABLE 26. MOUNTING BRACKET ASSEMBLY - RIGHT INDEX PART NUMBER DESCRIPTION QTY MOUNTING BRACKET ASSEMBLY - RIGHT REF NUT - 1/4 20 SELF LOCKING BRACKET - MECH MOUNTING - RIGHT LATCH SCREW -1 1/4 X 20 X.5 HEX HD SPRING ELEVATOR STOP BUSHING

59 Figure 27. Cabinet Assembly - Outer Layer

60 TABLE 27. CABINET ASSEMBLY - OUTER LAYER INDEX PART NUMBER DESCRIPTION QTY 1 - MONETARY PANEL ASSEMBLY (FIGURE 39) BEAN WINDOW ASSEMBLIES (MODEL 657 ONLY) (FIGURE 73) OPT 3 BEAN GRINDER ASSEMBLY (MODEL 657 ONLY) (FIGURE 92) OPT LINER - FLOOR 1 5 CUP DELIVERY ASSEMBLY (FIGURE 31) PRODUCT AND CONDIMENT CHUTES (FIGURE 98) INGREDIENT CANISTER ASSEMBLIES (FIGURE 77) FITTING - SPRAY HOSE SPRAY HEAD WASTE BUCKET (NOT SHOWN) GROUNDS BUCKET (NOT SHOWN) BRUSH - 1/2" DIAMETER (NOT SHOWN) BRUSH - 1 1/4" DIAMETER (NOT SHOWN) MONEY BOX ASSEMBLY (NOT SHOWN)

61 Figure 28. Cabinet Assembly - Inner Layer

62 TABLE 28. CABINET ASSEMBLY - INNER LAYER INDEX PART NUMBER DESCRIPTION QTY CABINET WELD ASSEMBLY - N.V. BLACK CABINET WELD ASSEMBLY - MILLENNIA GRAY CABINET WELD ASSEMBLY - SELECTA WHITE 2 - MONETARY CHANNEL ASSEMBLY (FIGURE 45) AIR COMPRESSOR (FIGURE 37) WATER TANK ASSEMBLY (FIGURE 70) SERVICE LIGHT AND BRACKET ASSEMBLY (FIGURE 35) COVER - HOT WATER VALVES (U.S.) COVER - HOT WATER VALVES (230 VOLT APPLICATIONS) COVER - HEATER - WATER TANK CUP STATION SUPPORT, OVERFLOW SWITCH AND CUP SENSOR (FIGURE 32) 9 - CANISTER SUPPORT CHANNEL (FIGURE 93) SINGLE BREWER ASSEMBLY (WITHOUT FILTER) (FIGURE 50) SINGLE BREWER ASSEMBLY (WITH FILTER (FIGURE 51) DUAL BREWER ASSEMBLY (WITHOUT FILTER) (FIGURE 52) (OPT) DUAL BREWER ASSEMBLY (WITH FILTER) (FIGURE 53) CHUTE - PAYOUT MOUNTING HARDWARE FILTER PAPER HOUSING AND COVER (FIGURE 34) (OPT) 14 - LEG, LEVELER, AND LEG AND HINGE ASSEMBLIES (FIGURE 30) 15 - BREWER DRIVE ASSEMBLY (FIGURE 60) VENILATION ASSEMBLY (FIGURE 62) 17 - WATER SUPPLY (FIGURE 66) (FIGURE 67) (FIGURE 68)

63 Figure 29. Cabinet Assembly - Miscellaneous Mounted Parts

64 TABLE 29. CABINET ASSEMBLY - MISCELLANEOUS MOUNTED PARTS INDEX PART NUMBER DESCRIPTION QTY COVER - EXHAUST FAN (WITHOUT FAN OPTION) SCREEN - EXHAUST FAN (WITH FAN OPTION - NOT SHOWN) (OPT) EXHAUST FAN - 115V (WITH FAN OPTION) EXHAUST FAN - 230V LOCK ARM - CABINET BRACKET - POWER PANEL RETAINER STOP - MONETARY PANEL WATER SHIELD BRACKET - CANISTER SUPPORT BRACKET - MOUNTING PLATE (WITH BREW MODES ONLY) PLATE - WATER FILTER (WITH WATER FILTER OPTION) (OPT) BRACE - CANISTER SUPPORT INSULATION - BACK - HOT WATER TANK

65 p0080 Figure 30. Leg, Leveler, and Leg and Hinge Assemblies

66 TABLE 30. LEG, LEVELER, AND LEG AND HINGE ASSEMBLIES INDEX PART NUMBER DESCRIPTION QTY PLUG - HOLE (NOT USED IN ALL APPLICATIONS) NUT - 1/4-20 WHIZ-LOCK PLATE - HINGE LEG BOLT TRAY BOLT LEG, HINGE, AND LEVELER ASSEMBLY LEVELER - CABINET LEG AND HINGE ASSEMBLY SCREW - # 5/16 X 1 W/LOCKING RING LEG AND LEVELER ASSEMBLY - CABINET LEG ASSEMBLY - CABINET LEVELER - CABINET

67 Figure 31. Cup Delivery Assembly

68 TABLE 31. CUP DELIVERY ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY CUP DELIVERY ASSEMBLY - FINAL (U.K., FRANCE, SPANISH, NEW ZEALAND, AUSTRALIA, BRAZIL 230 V, SWEDEN, SINGAP- PORE, SAUDI ARABIA) (INCLUDES PART NUMBER PLUS INDEX NUMBERS 1 AND 13) - CUP DELIVERY ASSEMBLY - FINAL (GERMANY) (INCLUDES PART NUMBER PLUS INDEX NUMBERS 1 AND 13) CUP DELIVERY ASSEMBLY - STANDARD (USA, BRAZIL 120V, MEXICO, CANADA, EL SALVADOR, ARGENTINA)(INCLUDES INDEX NUMBERS 2A, 3-12) 1 CUP DELIVERY ASSEMBLY - GERMANY (INCLUDES INDEX NUM- BERS 2B, 3-12) CHUTE ADAPTER ASSEMBLY - RIGHT (ARG./AUS./BRZ./FR./MEX./ N.Z./S.A./SP./U.K./U.S.) 1 2A WELD ASSEMBLY - CUP DELIVERY (ARG./AUS./BRZ./FR./MEX./ N.Z./S.A./SP./U.K./U.S.) 1 2B WELD ASSEMBLY - CUP DELIVERY (GER.) PUSH-IN FASTENER CUP SPACER/SENSOR LENS DRAIN TRAY BASE - CUP DELIVERY STATION TUBE - DRAIN RETAINER MOUNTING ASSEMBLY - CUP DEFLECTOR CUP DEFLECTOR - R.H CUP DEFLECTOR - L.H SPRING - CUP DEFLECTOR CHUTE ADAPTER ASSEMBLY - LEFT (ARG./AUS./BRZ./FR./MEX./ N.Z./S.A./SP./U.K./U.S.)

69 Figure 32. Cup Station Support, Overflow Switch, and Cup Sensor

70 TABLE 32. CUP STATION SUPPORT, OVERFLOW SWITCH, AND CUP SENSOR INDEX PART NUMBER DESCRIPTION QTY SUPPORT ASSEMBLY - CUP STATION MUG SENSOR & BRACKET ASSEMBLY (INCLUDES INDEX NUM- BERS 7-10) (ARG./FR./MEX./U.K./U.S.) MUG SENSOR & BRACKET ASSEMBLY - TRANSMISSIVE (GER.) STUD - STORAGE TRAY STUD - COLUMN LOCATOR CAPLUG - SPOUT * SPOUT - DISPENSING * CUP STATION SUPPORT SCREW - #8-32 X.31 HEX HD SENSOR - ASSEMBLY - MUG SENSOR ASSEMBLY - MUG - TRANSMISSIVE CAPLUG - 3/8" - FLUSH TYPE SCREW - #6-19 X.38 PHS T/C BRACKET - CUP SENSOR SUPPORT - CUP STATION - EUROTWIN 1 * - QUANTITY VARIES WITH NUMBER OF SELECTIONS

71 Figure 33. Overflow Switch Assembly

72 TABLE 33. OVERFLOW SWITCH ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY OVERFLOW SWITCH ASSEMBLY (INDEX NUMBERS 3 AND 7 NOT INCLUDED) REF BRACKET ASSEMBLY - OVERFLOW SWITCH SCREW - #6-32 X 1/4 THS S/T SCREW X 5/8 RHS CHAIN - OVERFLOW SWITCH SCREW - #8-18 X 1/2 RHS T/C FLOAT - OVERFLOW SWITCH COVER - OVERFLOW SWITCH NUT KEPS W/EXT L/WASHER SWITCH LEVER V3L -131-D INSULATION - OVERFLOW SWITCH

73 Figure 34. Filter Paper Housing and Cover

74 TABLE 34. FILTER PAPER HOUSING AND COVER INDEX PART NUMBER DESCRIPTION QTY PAPER ROLL ASSEMBLY (INCLUDES INDEX NUMBER 1, 2, 3, AND 5) BRACKET - PAPER ROLL SCREW - #8-32 X 1/2 RHS MACH. ZINC NUT - #8-32 KEPS ZINC PLATE COVER ASSEMBLY - FILTER PAPER HOUSING HOUSING ASSEMBLY - FILTER PAPER 1 * P FILTER PAPER PACKAGE ASSEMBLY *

75 Figure 35. Service Light/Bracket Assembly - U.S

76 TABLE 35. SERVICE LIGHT/BRACKET ASSEMBLY - U.S. INDEX PART NUMBER DESCRIPTION QTY SERVICE LIGHT/BRACKER ASSEMBLY - 115V RETAINER - HARNESS BALLAST ASSEMBLY BRACKET - SERVICE LIGHT BUSHING - #SB LIGHT ASSEMBLY - FLUORESCENT (INCLUDES INDEX NUMBERS 6-9) BRACKER - LOWER LIGHT SCREW - #4-36 X 5/ HARNESS - FLUORESCENT LIGHT SCREW - #4-36 X LAMP SLEEVE AND END CAPS ASSEMBLY FLUORESCENT LAMP

77 Figure 36. Service Light/Bracket Assembly (ARG./AUS./FR./GER./N.Z./SP./U.K.)

78 TABLE 36. SERVICE LIGHT/BRACKET ASSEMBLY (ARG./AUS./FR./GER./N.Z./SP./U.K.) INDEX PART NUMBER DESCRIPTION QTY LIGHT AND BRACKET ASSEMBLY - FLUORESCENT V SUPPRESSION ASSEMBLY V CABLE CLAMP - RICHCO #N BRACKET - SERVICE LIGHT JUMPER - GROUND WIRE JUMPER - SERVICE LIGHT - INTERNATIONAL LIGHT ASEMBLY - FLUORESCENT V FLUORESCENT LAMP #F15T8CW, 96/CS LAMP SLEEVE AND END CAPS ASSEMBLY LONG

79 Figure 37. Air Compressor Assembly - U.S

80 TABLE 37. AIR COMPRESSOR ASSEMBLY - U.S. INDEX PART NUMBER DESCRIPTION QTY AIR COMPRESSOR ASSEMBLY (INCLUDES INDEX NUMBERS 1 THROUGH 6) AIR COMPRESSOR - BREWER SUPPORT - COMPRESSOR SHOULDER SCREW BUMPER - PLUG BUSHING #OCB VIBRATION ISOLATOR DIAMETER

81 Figure 38. Air Compressor Assembly (ARG./US./FR./GER./S.A./SP./U.K.)

82 TABLE 38. AIR COMPRESSOR ASSEMBLY (ARG./US./FR./GER./S.A./SP./U.K.) INDEX PART NUMBER DESCRIPTION QTY AIR COMPRESSOR ASSEMBLY V AIR COMPRESSOR - BREWER V BUSHING #OCB COVER - AIR COMPRESSOR BUMPER - PLUG VIBRATION ISOLATOR DIAMETER BRACKET - AIR COMPRESSOR JUMPER - GROUND WIRE

83 Figure 39. Monetary Panel Assembly (Part 1 of 3)

84 TABLE 39. MONETARY PANEL ASSEMBLY (PART 1 OF 3) INDEX PART NUMBER DESCRIPTION QTY MONETARY PANEL WELD ASSEMBLY - NV BLACK MONETARY PANEL WELD ASSEMBLY - SELECTA WHITE SWITCH SERVICE SWITCH ASSEMBLY - FREE VEND LENS - DISPLAY FACEPLATE ASSEMBLY (WITH COIN OPTION) FACEPLATE ASSEMBLY (NO COIN OPTION) COIN INSERT (WITH COIN OPTION) COIN INSERT - AUSTRALIA LOWER MONETARY POSITION COIN BLOCK 1 SOME OF THE FOLLOWING ITEMS ARE INCLUDED WITH THE APPROPRIATE FREE VEND OPTIONS (NOT SHOWN): INSERT-INSTR-COINS/BILLS-U.S INSERT-INSTR-COINS ONLY-ENG INSERT-INSTR-FREE VEND-COIN/ INSERT-INSTR-FREE VEND-COINS INSERT-INSTRU-LOWER-UK-COINS CLIP-WIRE HARNESS SWITCH ASSY-FREE VEND

85 Figure 40. Monetary Panel Assembly (Part 2 of 3)

86 TABLE 40. MONETARY PANEL ASSEMBLY (PART 2 OF 3) INDEX PART NUMBER DESCRIPTION QTY BRACKET - PCB DISPLAY PCB ASSEMBLY - DISPLAY INSERT - INSTRUCTIONS- LOWER (FIGURE 42) PLATE - INSERT BACKING OPT BUTTON - COIN RETURN SHAFT - RETURN BUTTON SPRING - SHELF RESET BRACKER - COIN RETURN BUTTON COIN CHUTE ASSEMBLY INSERT - INSTRUCTIONS - UPPER (FIGURE 42) OPT SERVICE KEYPAD ASSEMBLY

87 Figure 41. Monetary Panel Assembly (Part 3 of 3)

88 TABLE 41. MONETARY PANEL ASSEMBLY (PART 3 OF 3) INDEX PART NUMBER DESCRIPTION QTY FACE PLATE ASSEMBLY - WITH COIN FACE PLATE ASSEMBLY - NO COIN SELECTION PANEL (WITH COIN OPTION) FACE PLATE ASSEMBLY (NO COIN OPTION) LENS - PUSHBUTTON LETTER SHEET - SELECTION SWITCH MEMBRANE SWITCH ASSEMBLY - SELECT PLATE - SELECT SWITCH - BACK UP - W/STUD /8" NUT - SELF-THREADING

89 Figure 42. Monetary Inserts - Upper Position

90 Figure 43. Monetary Inserts - Lower Position

91 Figure 44. Card Reader and Bill Validator Options

92 TABLE 44. CARD READER AND BILL VALIDATOR OPTIONS INDEX DESCRIPTION QTY 1 DOWNSTACK BILL VALIDATOR OPT 2 NUT 8 3 DEBIT CARD READER OPT 4 INSTRUCTION INSERT BACKING PLATE 0, 1, 2* 5 UPSTACK BILL VALIDATOR OPT 6 MONETARY PANEL WELD ASSEMBLY REF. *QUANTITY VARIES WITH MONETARY CAPABILITY MONETARY CAPABILITY TABLE 44A. MONETARY LOCATION OPTIONS UPPER LOWER NOTES ALL ITEMS ARE SECURED WITH FOUR NUTS (P/N ).SHADED ITEMS REPRESENT ALTERNATE CONFIGURATIONS. WITH COIN? COIN - VAL -CARD CARD READER UPSTACK VALIDATOR YES COIN - VAL -CARD DOWNSTACK VALIDATOR CARD READER YES COIN - VAL COIN - VAL COIN - CARD INSERT INSTRUCTIONS BACK- UP PLATE ( ) DOWNSTACK VALIDATOR INSERT INSTRUCTIONS BACK- UP PLATE ( ) UPSTACK VALIDATOR INSERT INSTRUCTIONS BACK- UP PLATE ( ) CARD READER COIN - CARD CARD READER INSERT INSTRUCTIONS BACK- UP PLATE ( ) YES VAL- CARD DOWNSTACK VALIDATOR CARD READER NO VAL- CARD CARD READER DOWNSTACK VALIDATOR NO COIN ONLY VAL ONLY VAL ONLY CARD ONLY CARD ONLY INSERT INSTRUCTIONS BACK- UP PLATE ( ) INSERT INSTRUCTIONS BACK- UP PLATE ( ) DOWNSTACK VALIDATOR CARD READER INSERT INSTRUCTIONS BACK- UP PLATE ( ) INSERT INSTRUCTIONS BACK- UP PLATE ( ) UPSTACK VALIDATOR INSERT INSTRUCTIONS BACK- UP PLATE ( ) INSERT INSTRUCTIONS BACK- UP PLATE ( ) CARD READER YES YES YES YES NO NO NO NO

93 TABLE 44B. COIN MECH OPTIONS - DUMB PART NUMBER DESCRIPTION MARS - TRC COINTRON COINCO 9340 L COINCO 9340 L - BRC MARS - MC MARS - TRC 6010 XV - 24V - W/15 PIN PLUG COINCO LF - 24 V - W/15 PIN PLUG CONLUX - USLX0041F COINCO 9300 L TABLE 44C. COIN MECH OPTIONS - MDB PART NUMBER DESCRIPTION COINCO - USD - G701 "MDB" MARS - TRC6512 "MDB" CONLUX - USLZ "MDB" NOTE National Vendors does not sell exec. coin mechanisms for the non-domestic market. TABLE 44D. BILL VALIDATOR OPTIONS - SERIAL PART NUMBER DESCRIPTION HARNESS P/N VALIDATOR - COINCO BA20SA VALIDATOR - MARS AE U5E VALIDATOR - MARS S VN U5E VALIDATOR - MARS - VN U5E 24V VALIDATOR - COINCO - BA 32 SA - 24V VALIDATOR - CONLUX - MKA B - 120V VALIDATOR - CONLUX - MKA B - 24V

94 TABLE 44E. BILL VALIDATOR OPTIONS - PULSE PART NUMBER DESCRIPTION HARNESS P/N MAKA VAL - MASK K (NB - 1KB - 400) VALIDATOR - MARS - S VN U5E - 110V TABLE 44F. BILL VALIDATOR OPTIONS - MDB PART NUMBER DESCRIPTION HARNESS P/N VALIDATOR - COINCO BA30SA VALIDATOR - MARS - VN U5M/ VALIDATOR - CONLUX - MKA B - 24V VALIDATOR - AE U5M "MDB - TABLE 44G. CARD READERS PART NUMBER DESCRIPTION HARNESS P/N DEBITEK #V15 - MM - NAT SYSTEM III BRACKET - DEBITEK CONTROLLER

95 Figure 45. Monetary Channel

96 TABLE 45. MONETARY CHANNEL INDEX PART NUMBER DESCRIPTION QTY PCB ASSEMBLY - MAIN CONTROLLER 1 2 SEE LABEL IC ASSEMBLY BRACKET - SWITCH - INTERLOCK SWITCH - 115V SWITCH - INTERLOCK V PCB ASSEMBLY - EXECUTIVE INTERFACE PCB ASSEMBLY - HOT DRINK INTERFACE COVER - CONTROLLER / INTERFACE PCB POWER PANEL ASSEMBLY - 115V POWER PANEL ASSEMBLY - U.K V POWER PANEL ASSEMBLY V POWER PANEL ASSEMBLY V - MEXICO HOUSING - POWER PANEL TRIAC - 35AMP - 600V

97 Figure 46. Power Panel Assembly (Brazil/U.S.)

98 TABLE 46. POWER PANEL ASSEMBLY (BRAZIL/U.S.) INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSY - DOMESTIC REF STANDOFF - PCB-3/8 SNAP LOCK INTERFERENCE FILTER NUT #8-32 KEPS ZINC PLATE * HARNESS - COIN HANDLING - POWER PLATE & STUD ASSY - POWER - DOM TRANSFORMER - 115V/23-V PRIMARY, 24V SECONDARY LABEL - N.V. BLACK JUMPER - GROUND WIRE CIRCUIT BREAKER - 4 AMP CIRCUIT BREAKER - 15 AMP SWITCH - SPDT - TOGGLE - 20 AMP HARNESS - POWER PANEL - DOMESTIC PCB ASSEMBLY - DUMB MECH POWER SUPPLY FUSE - 1 AMP (PART OF INDEX NUMBER 13)

99 Figure 47. Power Panel Assembly - ARG./AUS./N.Z./U.K

100 TABLE 47. POWER PANEL ASSEMBLY - ARG./AUS./N.Z./U.K. INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSEMBLY - U.K. REF HARNESS - POWER PANEL - INTERNATIONAL INTERFERENCE FILTER NUT - #8-32 KEPS ZINC PLATE JUMPER - TRANSFORMER - INTERNATIONAL PLATE AND STUD ASSEMBLY - POWER - U.K TRANSFORMER - 115V/230V PRIMARY, 24 V SECONDARY JUMPER - GROUND WIRE CIRCUIT BREAKER - 4 AMP SWITCH - DPST - TOGGLE - 20 AMP

101 Figure 48. Power Panel Assembly (FR./GER./S.A./SP.)

102 TABLE 48. POWER PANEL ASSEMBLY (FR./GER./S.A./SP.) INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSEMBLY FR./GER. REF HARNESS - POWER PANEL - FOREIGN INTERFERENCE FILTER NUT #8-32 KEPS ZINC PLATE JUMPER - TRANSFORMER - FOREIGN PLATE & STUD ASSEMBLY - POWER TRANSFORMER - 115V/230V PRIMARY, 24V SECONDARY JUMPER - GROUND WIRE CIRCUIT BREAKER - 4 AMP CIRCUIT BREAKER/SWITCH - 16 AMP

103 Figure 49. Power Panel Assembly (MEX.)

104 TABLE 49. POWER PANEL ASSEMBLY (MEX.) INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSEMBLY - MEXICO REF HARNESS - POWER PANEL - MEXICO INTERFERENCE FILTER JUMPER - 120VAC TO TRANSFORMER TRANSFORMER - AUTO - MEXICO NUT #8-32 KEPS ZINC PLATE JUMPER - GROUND WIRE PLATE & STUD ASSEMBLY - POWER - MEXICO TRANSFORMER - 115V/230V PRIMARY, 24V SECONDARY CIRCUIT BREAKER - 4 AMP SWITCH - DPST - TOGGLE - 20 AMP

105 Figure 50. Single Brewer Assembly (No Filter)

106 TABLE 50. SINGLE BREWER ASSEMBLY (NO FILTER) INDEX PART NUMBER DESCRIPTION QTY BARREL ASSEMBLY - BREWER (FIGURE 54) REF BARREL SUPPORT - BREWER BOLT - 1/4-20 X 1 1/ RACK ASSEMBLY (FIGURE 56) SHAFT - FLIP STOP BASKET - BREWER ROLLER - STOP SPRING - BREWER WALL ASSEMBLY - REAR SCREW - #8-32 X.38 HHS W/LW SIDEWALL - BREWER PIN-ROLLER - SIDEWALL SHAFT - SWING ARM LOCKNUT - #1/ GEAR & CAM ASSEMBLY WALL ASSEMBLY - BOTTOM - FRONT SPACER - SINGLE BREWER SPRING SWING ARM ASSEMBLY (INCLUDES INDEX NUMBERS 20 THROUGH 25) EXT. SPRING - SWING ARM SHAFT - RETAINER DIA SWING ARM ASSEMBLY FUNNEL - COFFEE SEAL - BREWER FILTER SUPPORT - 30 MESH DRIVE CONNECTION - BREWER RETAINING RING DIA ROLLER - BREWER SPACER - CAM PINION GEAR ASSEMBLY LABEL - CAUTION: HOT WATER HAZARD (AUS./N.Z./U.K./U.S.) LABEL - CAUTION: HOT WATER HAZARD (GER) LABEL - CAUTION: HOT WATER HAZARD (ARG./MEX./SP.) LABEL - CAUTION: HOT WATER HAZARD (FR.)

107 Figure 51. Single Brewer Assembly (With Filter)

108 TABLE 51. SINGLE BREWER ASSEMBLY (WITH FILTER) INDEX PART NUMBER DESCRIPTION QTY SINGLE BREWER ASSEMBLY - WITH FILTER REF BARREL ASSEMBLY - BREWER (FIGURE 54) BARREL SUPPORT - BREWER BOLT - 1/ / BASKET - BREWER PAPER RACK ASSEMBLY - BREWER (FIGURE 56) WALL ASSEMBLY - REAR SHAFT - FLIP STOP ROLLER - STOP SPRING - BREWER SCREW - #8-32 X.38 HHS W/LW PAPER MECHANISM ASSEMBLY (FIGURE 58) SPRING COVER - PAPER MECH SCREW - #10-32 X 3/8 HHS SL W/ EA PIN - ROLLER - SIDEWALL SHAFT - SWING ARM SIDEWALL - BREWER LOCKNUT - #1/ WALL ASSEMBLY - BOTTOM FRONT GEAR & CAM ASSEMBLY SPACER - SINGLE BREW ROLLER - BREWER SPRING SWING ARM ASSEMBLY (INCLUDES INDEX NUMBERS 24 THROUGH 29) SHAFT - RETAINER DIA EXT. SPRING - SWING ARM SWING ARM ASSEMBLY FUNNEL - COFFEE SEAL - BREWER FILTER SUPPORT - 30 MESH DRIVE CONNECTION - BREWER RETAINING RING RATCHET DRIVE - PAPER MECH PINION GEAR ASSEMBLY

109 Figure 52. Dual Brewer Assembly (No Filter)

110 TABLE 52. DUAL BREWER ASSEMBLY (NO FILTER) INDEX PART NUMBER DESCRIPTION QTY DUAL BREWER ASSEMBLY - NO FILTER - TEA REF BARREL ASSEMBLY - BREWER (FIGURE 52) BARREL SUPPORT - DUAL BREWER BOLT 1/4-20 X 1 1/ BASKET - BREWER TEA BASKET ASSEMBLY (NOT SHOWN) RACK ASSEMBLY - DUAL BREWER (FIGURE 57) REAR WALL ASSEMBLY - DUAL BREWER SHAFT - FLIP STOP - DUAL BREWER ROLLER - STOP SPRING - BREWER SCREW - #8-32 X.38 HHS W/LW PIN - ROLLER - SIDEWALL SHAFT - SWING ARM - DUAL BREWER RETAINING RING SIDEWALL - BREWER LOCKNUT - #1/ BOT FRT WALL ASSEMBLY - DUAL BREWER TIME GEAR/CAM ASSEMBLY - DUAL BREWER SPACER - DUAL BREWER EXTERNAL SPRING SWING ARM ASSEMBLY - DUAL BREWER - NO FILTER SHAFT-RETAINER DIA EXT. SPRING - SWING ARM SWING ARM ASSEMBLY - DUAL BREWER FUNNEL - DUAL BREWER SEAL - BREWER FILTER SUPPORT - 30 MESH DRIVE CONNECTION - BREWER RETAINING RING DIA PIN-ROLLER - SIDEWALL ROLLER - BREWER SIDEWALL - BREWER SPACER - CAM PINION GEAR ASSEMBLY - DUAL BREWER