MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
|
|
- Barrie Carson
- 5 years ago
- Views:
Transcription
1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
2 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with higher cutting parameters or obtain longer tool life with existing conditions. The polished flutes provide the ideal environment for good chip evacuation. ACCURACY The double margin and Tri-Coolant Technology helps to provide high quality hole surface finishes. Increased coolant volume Optimized flow at the margin Faster chip evacuation FLEXIBILITY New AlTiCrN PVD coating technology ensures a long tool life and high productivity in standard and high cutting speeds up to Vc 25 m/min. Suitable in steels, stainless steels and cast iron. 2
3 PRODUCTIVITY New Coating Technology Zero-µ Surface For excellent welding resistance and low coefficient of friction resulting in sharp cutting. New AlTiCrN PVD coating Ensures a long tool life especially at high cutting speeds and feeds. Tough Carbide Substrate The excellent chipping resistance ensures a reliable machining process. TOOL LIFE TEST Ø8 MM AT STANDARD CUTTING CONDITION Tool life of was 2.5 times longer. 8 m Conventional Chipping Cutting length (m) 44 m <Cutting Conditions> Work material Hole depth Cutting speed per revolution Coolant Machine DIN C5 4 mm 12 m/min.25 mm/rev W.S.O. Vertical M/C 3
4 TOOL LIFE TEST Ø8 MM AT HIGH-SPEED CUTTING CONDITION Tool life of was 4 times longer. Conventional Chipping 77 m Cutting length (m) <Cutting Conditions> Work material Hole depth Cutting speed per revolution Coolant Machine DIN C5 4 mm 2 m/min.35 mm/rev W.S.O. Vertical M/C ACCURACY Oversize hole test - ø8 mm in carbon steel drill produced more consistent and less oversized holes. 4 Oversize Diameter (µ) Conventional Cutting length (m) Entrance Exit Entrance Exit <Cutting Conditions> Work material Hole depth Cutting speed per revolution Coolant Machine DIN C5 25 mm 12 m/min.25 mm/rev W.S.O. Vertical M/C BENEFITS New accumulated Al-Ti-Cr-N based PVD coating. MPS double margin type for accurate and reliable drilling. All drills with through coolant holes as standard. 4
5 UWC DP DOUBLE MARGIN TYPE l/d=3 and 5 l/d=8 Thinning P M K N S H Tolerance (DIN) (mm) Tolerance (Others) (mm) (mm) 3 6 6< 1 1< 18 18< Cylindrical shank type with taper neck 2 Cylindrical shank type ----S/L-DIN-C SIG SIG SIG SIG SIG SIG ----S/L-DIN-C SIG SIG SIG SIG SIG SIG 3 Whistle notch shank type with taper neck 4 Whistle notch shank type ----S/L-DIN (Whistle notch) ----S/L-DIN (Whistle notch) *The coolant hole of ø6 mm or less will be round shape. *SIG : l/d 3 and 5 = 14, 8 = S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C
6 DOUBLE MARGIN TYPE (mm) (l/d) S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C : Inventory maintained. : Non stock, produced to order only.
7 DOUBLE MARGIN TYPE S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C
8 DOUBLE MARGIN TYPE 8 (mm) (l/d) S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C : Inventory maintained. : Non stock, produced to order only S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C
9 DOUBLE MARGIN TYPE S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C
10 DOUBLE MARGIN TYPE S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C : Inventory maintained. : Non stock, produced to order only.
11 DOUBLE MARGIN TYPE S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C L8C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C S-DIN S-DIN-C L-DIN L-DIN-C
12 DOUBLE MARGIN TYPE RECOMMENDED CUTTING CONDITIONS DRILL (3xD, 5xD, 8xD) Work Material Diameter Conditions Hardness P Mild Steel 18HB 1 (6 15).15 (.1.2) 12 (7 17).19 (.12.25) 13 (8 19).23 (.15.3) Carbon Steel 18 25HB 9 (6 14).15 (.1.19) 1 (7 16).18 (.12.24) 11 (8 18).22 (.15.29) Alloy Steel 28 35HB 8 (5 11).12 (.1.14) 9 (6 12).15 (.12.18) 9 (7 14).19 (.15.22) M Stainless Steel 4 (2 5).8 (.6.12) 4 (3 5).9 (.7.13) 4 (3 5).11 (.8.16) K Cast Iron 35MPa 9 ( 6 1).15 (.1.2) 1 (7 11).21 (.12.3) 11 (8 13).25 (.15.35) Ductile Cast Iron 45MPa 8 (5 9).12 (.8.16) 9 (6 1).17 (.1.24) 9 (7 12).21 (.14.28) 8MPa 6 (4 8).9 (.6.12) 7 (5 9).13 (.8.18) 7 (6 1).17 (.12.22) Work Material Drill Diameter Conditions Hardness P Mild Steel 18HB 14 (9 21).27 (.18.35) 16 (1 24).3 (.2.4) 17 (1 25).33 (.2.45) Carbon Steel 18 25HB 12 (9 19).26 (.18.33) 14 (1 22).29 (.2.38) 15 (1 23).32 (.2.43) Alloy Steel 28 35HB 1 (8 15).22 (.18.25) 12 (9 17).24 (.2.27) 13 (9 18).25 (.2.3) M Stainless Steel 5 (4 7).14 (.11.18) 5 (4 7).15 (.12.2) 5 (4 7).16 (.12.22) K Cast Iron 35MPa 12 (9 14).29 (.18.4) 14 (1 16).33 (.2.45) 15 (1 17).35 (.2.5) Ductile Cast Iron 45MPa 1 (8 13).25 (.16.34) 12 (9 15).28 (.18.38) 13 (9 16).29 (.18.4) 8MPa 8 (7 11).2 (14.26) 1 (8 13).23 (.16.3) 11 (8 14).24 (.16.32) Work Material Drill Diameter Conditions Hardness P Mild Steel 18HB 18 (1 25).35 (.2.5) 18 (1 25).38 (.2.55) 18 (1 25).4 (.2.6) Carbon Steel 18 25HB 16 (1 23) 34 (.2.48) 16 (1 23).36 (.2.52) 16 (1 23).39 (.2.57) Alloy Steel 28 35HB 14 (9 18).27 (.2.34) 14 (9 18).28 (.2.36) 14 (9 18).3 (.2.4) M Stainless Steel 5 (4 7).18 (.14.24) 5 (4 7).19 (.15.26) 5 (4 7).21 (.16.28) K Cast Iron 35MPa 16 (1 17).4 (.2.6) 16 (1 17).43 (.2..65) 16 (1 17).45 (.2.7) Ductile Cast Iron 45MPa 14 (9 16).31 (.18.44) 14 (9 16).33 (.18.48) 14 (9 16).35 (.18.52) 8MPa 11 (8 14).25 (.16.34) 11 (8 14).27 (.16.38) 11 (8 14).28 (.16.4) 12
13 New straight flute design The new straight flute provides a smooth and stable cutting action that gives long tool life. CUTTING PERFORMANCE Ø8 MM A straight cutting edge performs better than a wave type edge at high cutting conditions. <Cutting Conditions> Work material : DIN C5 Hole depth : 4 mm Cutting speed : 2 m/min per revolution :.35 mm/rev Coolant : W.S.O. Machine : Vertical M/C Conventional LONGER TOOL LIFE The new MIRACLE SIGMA drill achieved a higher performance when drilling carbon steels and gives longer tool life than conventional drills. Tool life +18% <Cutting Conditions> Work material Hole depth Coolant Machine : Carbon Steel Cf53 : 4 mm : W.S.O. : Machining Centre Conventional Drill Revolution : Competitor : 16 m/min : 64 min-1 :.25 mm/rev : 16 mm/min Drill Revolution : -8L-DIN-C : 22 m/min : 88 min-1 :.35 mm/rev : 38 mm/min Number of drilled parts / hour (pcs.) +4% 3 +38% 3 HIGHER FEED AND SPEED Conventional (mm/min) 2 1 (m/min-1) Conventional 2 1 The new MIRACLE SIGMA drill can run at higher speeds and feeds to achieve an extremely high performance ratio. 13
14 OPERATIONAL GUIDANCE DRILL HOLDING DRILL LENGTH DRILL INSTALLATION INSTALLATION TOLERANCE Adjusting Screw A Thrust bearing type collet chuck holds the drill securely. A x 1.5 Do not clamp on the flutes. Run-out.3mm THROUGH COOLANT TYPE COOLANT HANDLING THIN WORKPIECE INTERRUPTED CUTTING One Process Spindles Through Coolant Revolving Coolant Machine Small particles of swarf will jam in the oil hole of small diameter drills. Always use a fine mesh filter as a preventative measure. If Bending Occurs Lower the feed when drillng the interrupted part. Requires Prior Dirt and dust particles adhere Machining Coolant pressure is approx..5 1MPa (< 5:2 3MPa). to the oil in old coolant and prevent an efficient flow. Regular coolant exchange is recommended. Support the Workpiece Spot face with an end mill prior to drilling. STEPPED HOLES BURRING AND WORKPIECE CHIPPING Divide the two processes. Drill the larger hole first. *A tool for machining both chamfer and spot face can be produced to order. Lower the feed rate by 5% at the end of through cutting. Add a 45 chamfer. Change the point angle. 14
15 NOTES 15
16 GERMANY MMC HARTMETALL GMBH Comeniusstraße Meerbusch Tel Fax admin@mmchg.de U.K. MMC HARDMETAL U.K. LTD Mitsubishi House, Galena Close. B77 4AS Tamworth Tel Fax sales@mitsubishicarbide.co.uk SPAIN MITSUBISHI MATERIA ESPAÑA, S.A. Calle Emperador Museros/Valencia Tel Fax mme@mmevalencia.com FRANCE MMC METAL FRANCE S.A.R.L. 6, Rue Jacques Monod 914 Orsay Tel Fax mmfsales@mmc-metal-france.fr ITALY MMC ITALIA S.R.L. Via Montefeltro 6/A, 2156 Milano Tel Fax info@mmc-italia.it RUSSIA MITSUBISHI HARDMETAL OOO LTD. Electrozavodskaya St. 24, build.3, 1723 Moscow Tel Fax info@mmc-carbide.ru POLAND MMC HARDMETAL POLAND SP. Z O.O Al. Armii Krajowej 61, Wroclaw Tel Fax sales@mitsubishicarbide.com.pl TURKEY MMC HARTMETALL GMBH ALMANYA - İZMİR MERKEZ ŞUBESİ Adalet Mahallesi Anadolu Caddesi No: 41-1 / Bayraklı / İzmir Tel Fax info@mmchg.com.tr DISTRIBUTED BY: Teräskonttori Oy Muuntotie 3 Puh: Vantaa info@teraskonttori.fi Myynti: Verkkokauppa Asiakaspalvelu Puh: Order Code: B211E B244E tilaus@teraskonttori.fi Published: (X XXX), Printed in XXX Germany
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationB368E MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING
MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING 2017.11 B368E MS DRILL SOLID CARBIDE DRILL SERIES A new choice of quality tooling for a superior cost peformance ratio. A versatile combination of reliable
More informationMP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING
ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that
More informationB182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS
VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOY 2018.04 B182E VFX5/6 ERIE UNPARALLELED CHIP EJECTION PROPERTIE HELP RE-DEFINE THE PARAMETER FOR MACHINING TITANIUM ALLOY HIGH RIGIDITY DEIGN
More informationA revolution in stainless steel turning
A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic deformation resistance. B201E ISO insert Series for Stainless
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationC007E HSK-T TOOLS HSK-T TOOL STANDARDS
C007E HSK-T TOOL STANDARDS HOW TO READ THE STANDARD OF How this section page is organised z Organised by product series. (Refer to the index on the next page.) PRODUCT TYPE indicates the first four letters
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationHeat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
More informationTOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
More information4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationSMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling
Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different
More informationGrooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationTOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2014.01 B194H Produces excellent surface finishes. PVD coated Cermet grade for steel PVD coated Cermet grade for steel 3025 3025 3025 has excellent flank
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationTR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
More informationADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
More informationMACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction
No:161-1 Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value Safety instruction Do not touch the edge with bare hand. Wear safety glasses or face cover. Make appropriate
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More informationProduces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2013.12 Update B194G New positive breaker for steel Produces excellent surface finishes. PVD coated Cermet grade for steel 3025 3025 has excellent flank
More informationKED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationINDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationDouble Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling.
No. 439 EPSM-W-PN Epoch Multi Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling. Conventional single gash type EPSM
More informationTOOLS NEWS B225N. Cutting Off & Grooving System. GWSeries. New Product. Long Lasting, Easy to Use Cutting Off & Grooving System
TOOLS NEWS B225N & Grooving System Series New Product Long Lasting, Easy to Use & Grooving System Simplified Series Simplicity & convenience. Introducing a new kind of cutting off & grooving system that
More informationEnergy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationTOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
More informationPRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More informationEZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison
Tooling by Drills TEZD-MS/MLTYPE Easy assembly and high cutting performances Ecology EZ cutting edge geometry reduce power consumption by 30%. Economy High rigid insert. achiees longer tool life of holder
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationSuper Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationKED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationSpecial drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationCrazyDrill TM Cool XL
CrazyDrill TM Cool XL NEW Extra long High Performance Drills 2 1 shot = 1 hole CrazyDrill Cool XL for deep hole drilling With the new CrazyDrill Cool XL, the engineers from Mikron Tool have developed a
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationVFX for High Efficiency Milling of Titanium Alloys
TOOL NEW 2017.5 Update B182A For Milling VFX eries Insert Expansion VFX for High Efficiency Milling of s Outstanding metal removal rates up to 24 inch 3 /min (with ø2.5" cutter) Unparalleled Chip Ejection
More informationAQUA DRILL EX OIL-HOLE LONG
AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient
More informationAquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
More informationTOOLS NEWS Update B194B. PVD coated Cermet grade for steel MP3025. Series Expansion. For excellent surface finishes and extended tool life.
Series Expansion TOOLS NEWS 2012.10 Update B194B PVD coated Cermet grade for steel For excellent surface finishes and extended tool life. PVD coated Cermet grade for steel Better tool life when machining
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationStandard product line MEGA-Speed-Drill. MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron. The tool specialists for the trade.
The tool specialists for the trade. Standard product line MEGA-Speed-Drill Available immediately as 5xD version : MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron The tool specialists for the trade. MILLER
More informationThe technologically minded. Automotive. industry. Technologies, solutions for automotive industry
The technologically minded Automotive industry Technologies, S olid c arbide ttools, ools, P KD and HSS Solid carbide PKD solutions for automotive industry 2 3 oo ver the last 50 years Diager Industrie
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationCoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant
Cororill elta-c Solid carbide drills BIntroduction Solid carbide drills for small part machining designed for precision holes, IT8-10. Made with a tough fine-grained substrate with a wear resistant PV
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationUniversal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
More informationCrazyDrill TM Cool. The Mikron Tool drilling concept
CrazyDrill TM Cool The Mikron Tool drilling concept 2 Usable length x d 25 coated Item number uncoated d (k5) l (± 0.1) D (h) L D Powerchamber L effective length l Shank with Coolant Powerchamber for small
More informationA revolution in stainless steel turning
ISO Insert Series for Stainless Steel Turning TOOLS NEWS A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than
More informationThe Ultimate Solid Carbide Indexable Drill with a
The Ultimate Solid Carbide Indexable Drill with a Chamfering Option! Replaces Any Cylindrical Solid Carbide or High Speed Steel Drill www.iscar.com Engineered for Chamfering Performance Modular System:
More informationExcellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering
Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationSuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationMASTER CATALOG SOLID END MILL PORTFOLIO.
MASTER CATALOG SOLID END MILL PORTFOLIO Beyond Solid End Mills High-performance milling in a new dimension. Tool Selection Guide................................................................M2 M5 Grades
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
More informationPROMOTIONS. SP ECIAL OFFERS ON Additional discounts available Receive 1 cutter for free Special prices available Special prices available
PROMOTIONS valid until 30.06.2016 Turning & Milling Inserts High Feed Milling Shoulder & Face Milling Solid Carbide End Mills Drilling Threading SP ECIAL OFFERS ON Additional discounts available Receive
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More information3 Cutting Edges Use GBA for Grooving
CP188-E 3 Cutting Edges Use G for Grooving Wide Product Lineup PVD Coated for Steel / PR905 Smooth Chip evacuation due to no interference on the chip pocket External Grooving Internal Grooving G-MY New
More information