SPECIFICATION FOR APPROVAL

Transcription

1 RoHS ompliant SPEIFIATION FOR APPROVAL Product Name Product Type Uncoated Metallized Polyester Film apacitor(stacked version) 25(L25 Series) Product ode ustomer ustomer ode Issue Date Xiamen Faratronic o. Ltd. represented by ALFATE GmbH & o.kg Meckenloher Str Rednitzhembach / Germany Tel.: +49 () / Fax.: +49 () / info@alfatec.de *.The specification are the property of Xiamen Faratronic o.ltd and shall not be copied or used as commercial purposes without permission. Page 1 of 12

2 25 L25 Series Uncoated Metallized Polyester Film apacitor(stacked version) Outline Drawing Features metallized polyester film, stacked construction, Uncoated High impulse and pulse strength Typical Applications D impulse and pulse circuits SMPS, converter, Electronic ballasts, compact fluorescent lamps Specifications Reference Standard GB/T 7332(IE ) limatic ategory 55/125/56 Rated Temperature 85 Operating Temperature Range Rated Voltage apacitance Range apacitance Tolerance Voltage Proof Dissipation Factor Insulation Resistance Maximum Pulse Rise Time(dV/dt) If the working voltage(u) is lower than the rated voltage(u R ),the capacitor can be worked at a higher dv/dt. In this case, the maximum allowed dv/dt is obtain by multiplying the right value with U R /U. -55 ~125 (+85 to +125 :decreasing factor 1.25% per for U R ) 63V, 1V, 25V, 4V, 63V, 1 V.1 F~1. F ±5%(J), ±1%(K), ±2%(M) 1.4U R (2s) U R 1V U R 1V Frequency N.1μF N >.1μF 1kHz 1.% 1.% 1kHz 1.5% - 1kHz 3.% - U R (V) 375M, N.33 F 125s, N.33 F 75M, N.33 F 25s, N.33 F dv/dt (V/μs) U R 1V, charge voltage is 1V U R 1V, charge voltage is 1V (2, 1min) P=5. P=7.5 P=1. P= Storage ondition Temperature:not exceeding 35 Humidity:not exceeding 75% RH Storage time:12 months Page 2 of 12

3 25 L25 Series Part number system The 18 digits part number is formed as follow: Digit 1 to 3 Series code 25=L25 Digit 4 to 5 D rated voltage 1J=63V 2A=1V 2E=25V 2G=4V 2J=63V 3A=1V Digit 6 to 8 Rated capacitance value For example : 13=1 1 3 pf=.1uf Digit 9 apacitance tolerance J=±5%,K=±1%, M=±2% Digit 1 Lead pitch 2=5.mm 3=7.5mm 4=1.mm 6=15.mm Digit 11 Internal use Digit 12 to 15 Lead form and packaging code Digit 16 to 18 Internal use Table 1 lead dimensions and packaging code Digit 12 Digit 13 Digit 14 Digit 15 code explanation code explanation code explanation code explanation A ammo-pack F=5.mm F=7.5mm F=1.mm F=15.mm straight 1 2 each cap. among two consecutive holes P3=12.7mm,H=18.5mm (For pitch=5./7.5mm) each cap. among two consecutive holes P3=12.7mm, H=18.5mm (For pitch=1mm) straight lead in the figure above 5 each cap. among two consecutive holes P3=25.4mm, H=18.5mm (For pitch=15mm) code explanation Length tolerance ±.5mm Or satandard length standard lead length (18mm~22mm) 45 lead length 4.5mm Page 3 of 12

4 25 L25 Series Dimensions (mm) 63Vdc(4Vac) 63Vdc(4Vac) 63Vdc(4Vac) N W H T P d Part number J12-2**** J393-2**** J224-3**** J122-2**** J473-2**** J274-3**** J152-2**** J563-2**** J334-3**** J182-2**** J683-2**** J394-3**** J222-2**** J823-2**** J474-3**** J272-2**** J14-2**** J564-3**** J332-2**** J124-2*** J684-3**** J392-2**** J154-2**** J824-3**** J472-2**** J184-2**** J15-3**** J562-2**** J224-2**** J125-3**** J682-2**** J274-2**** J155-3**** J822-2**** J334-2**** J185-3**** J13-2**** J394-2**** J225-3**** J123-2**** J474-2**** J275-3**** J153-2**** J564-2**** J335-3**** J183-2**** J684-2**** J395-3**** J223-2**** J824-2**** J475-3**** J273-2**** J15-2**** J565-3**** J333-2**** J685-3****+++ 1Vdc(63Vac) 1Vdc(63Vac) 1Vdc(63Vac) N W H T P d Part number A12-2**** A184-2**** A334-4**** A122-2**** A224-2**** A394-4**** A152-2**** A274-2**** A474-4**** A182-2**** A334-2**** A564-4**** A222-2**** A394-2**** A684-4**** A272-2**** A474-2**** A824-4**** A332-2**** A564-2**** A15-4**** A392-2**** A684-2**** A125-4**** A472-2**** A824-2**** A155-4**** A562-2**** A15-2**** A185-4**** A682-2**** A14-3**** A225-4**** A822-2**** A124-3**** A15-6**** A13-2**** A154-3**** A125-6**** A123-2**** A184-3**** A155-6**** A153-2**** A224-3**** A185-6**** A183-2**** A274-3**** A225-6**** A223-2**** A334-3**** A275-6**** A273-2**** A394-3**** A335-6**** A333-2**** A474-3**** A395-6**** A393-2**** A564-3**** A475-6**** A473-2**** A684-3**** A565-6**** A563-2**** A824-3**** A685-6**** A683-2**** A15-3*** A825-6**** A823-2**** A125-3**** A16-6**** A14-2**** A155-3**** A124-2**** A185-3**** A154-2**** A225-3****+++ Note: 1. - =capacitance tolerance code, M=±2%,K=±1%,J=±5% 2. **** =lead form and packaging code (refer to table 1). Page 4 of 12

5 25 L25 Series Dimensions (mm) 25Vdc(16Vac) 25Vdc(16Vac) 25Vdc(16Vac) N W H T P d Part number E12-2**** E823-2**** E154-4**** E122-2**** E14-2**** E184-4**** E152-2**** E124-2**** E224-4**** E182-2**** E154-2**** E274-4**** E222-2**** E333-3**** E334-4**** E272-2**** E393-3**** E394-4**** E332-2**** E473-3**** E474-4**** E392-2**** E563-3**** E224-6**** E472-2**** E683-3**** E274-6**** E562-2**** E823-3**** E334-6**** E682-2**** E14-3**** E394-6**** E822-2**** E124-3**** E474-6**** E13-2**** E154-3**** E564-6**** E123-2**** E184-3**** E684-6**** E153-2**** E224-3**** E824-6**** E183-2**** E274-3**** E15-6**** E223-2**** E334-3**** E125-6**** E273-2**** E473-4**** E155-6**** E333-2**** E563-4**** E185-6**** E393-2**** E683-4**** E225-6**** E473-2**** E823-4**** E275-6**** E563-2**** E14-4**** E335-6**** E683-2**** E124-4****+++ N ( F) W max 4Vdc(2Vac) 4Vdc(2Vac) 4Vdc(2Vac) H T P d Part number max max G12-2**** G222-3**** G333-4**** G122-2**** G272-3**** G393-4**** G152-2**** G332-3**** G473-4**** G182-2**** G392-3**** G563-4**** G222-2**** G472-3**** G683-4**** G272-2**** G562-3**** G823-4**** G332-2**** G682-3**** G14-4**** G392-2**** G822-3**** G124-4**** G472-2**** G13-3**** G154-4**** G562-2**** G123-3**** G184-4**** G682-2**** G153-3**** G224-4**** G822-2**** G183-3**** G473-6**** G13-2**** G223-3**** G563-6**** G123-2**** G273-3**** G683-6**** G153-2**** G333-3**** G823-6**** G183-2**** G393-3**** G14-6**** G223-2**** G473-3**** G124-6**** G273-2**** G563-3**** G154-6**** G333-2**** G683-3**** G184-6**** G393-2**** G823-3**** G224-6**** G473-2**** G14-3**** G274-6**** G563-2**** G124-3**** G334-6**** G683-2**** G154-3**** G394-6**** G823-2**** G13-4**** G474-6**** G14-2**** G123-4**** G564-6**** G12-3**** G153-4**** G684-6**** G122-3**** G183-4**** G824-6**** G152-3**** G223-4**** G15-6**** G182-3**** G273-4****+++ Note: 1. - =capacitance tolerance code, M=±2%,K=±1%,J=±5% 2. **** =lead form and packaging code (refer to table 1). Page 5 of 12

6 25 L25 Series Dimensions (mm) N ( F) W max 63Vdc(4Vac) 63Vdc(4Vac) 63Vdc(4Vac) H T P d Part number max max J12-2**** J12-3**** J14-6**** J122-2**** J122-3**** J124-6**** J152-2**** J152-3**** J154-6**** J182-2**** J182-3**** J184-6**** J222-2**** J222-3**** J224-6**** J272-2**** J272-3**** J274-6**** J332-2**** J332-3**** J334-6**** J392-2**** J392-3**** J394-6**** J472-2**** J472-3**** J474-6**** J562-2**** J562-3**** J682-2**** J682-3**** J822-2**** J822-3**** J13-2**** J13-3**** J123-2**** J123-3**** J153-3**** J183-3**** J223-3**** J273-3**** J333-3**** J393-3**** J473-3****+++ N ( F) W max 1 Vdc(6Vac) 1 Vdc(6Vac) 1 Vdc(6Vac) H T P d Part number max max A12-2**** A12-3**** A123-3**** A122-2**** A122-3**** A153-3**** A152-2**** A152-3**** A183-3**** A182-2**** A182-3**** A223-3**** A222-2**** A222-3**** A273-3**** A272-2**** A272-3**** A333-3**** A332-2**** A332-3**** A392-2**** A392-3**** A472-2**** A472-3**** A562-2**** A562-3**** A682-2**** A682-3**** A822-2**** A822-3**** A13-2**** A13-3****+++ Note: 1. - =capacitance tolerance code, M=±2%,K=±1%,J=±5% 2. **** =lead form and packaging code (refer to table 1). Page 6 of 12

7 25 L25 Series MAX. VOLTAGE(Vr.m.s) VERSUS FREQUENY Note: sinusoidal wave-form environment temperature 85,internal temperature rise T=15, p (pitch) in mm.. Page 7 of 12

8 Test Method And Performance No. Item Performance 1 Solderability Initial measurement Terminal strength Resistance to solder heat Final measurement Initial measurement Rapid change of temperature Vibration Bump Final measurement climate sequence Initial measurement Dry heat Damp heat, yclic old Low air pressure Damp heat, cyclic other Final measu rement Good quality of tinning apacitance, Tg There shall be no visible damage There shall be no visible damage, legible marking / 2 (relative to the initial value) Increase of tg :.3 ( 1.μF).2 (>1.μF) apacitance, Tg There shall be no evidence of deterioration. There shall be no evidence of deterioration. There shall be no evidence of deterioration. / 5 (relative to the initial value) Increase of tg :.3 ( 1.μF).2 (>1.μF) IR: 5 of the rated value apacitance, Tg There shall be no permanent breakdo wn, flashover or other harmful defor mation when applying U R at the last 1 minute. There shall be no evidence of deterioration and the marking shall be legible. / 5 (relative to the initial value) Increase of tg :.5 ( 1.μF).3 (>1.μF) IR: 5 of the rated value 25 L25 Series Test method (GB 7332(IE )) Solder temperature:245 5 Immersion time: 2.s.5s Tension Ua1: Pull: d=.5mm,5n d.6mm, 1N Bend Ub: The pull of bend: d=.5mm, 2.5N d.6mm, 5N The terminals shall be bent 2 times in each direction. Solder temperature:26 5 Immersion time: 1s 1s A =-55, B = cycles Duration: t=3min Amplitude.75mm or acceleration 98m/s 2 (whichever is the smaller severity), f: 1Hz to 5Hz.Three directions, 2h for each direction, total 6h. 4 times, Acceleration: 39m/s 2,Pulse duration, 6ms +125, 16h Test Db, Severity: b, the first cycle -55, 2h 15 ~ 35, 8.5kPa, 1h, Test Db, Severity b, the other cycles, Applying U R for 1 minute after the test finished. Page 8 of 12

9 No. Item Performance 5 Damp heat steady state 6 Endurance 7 8 Temperature characteristic harging and discharging There shall be no evidence of deterioration and the marking shall be legible. / 5 (relative to the initial value) Increase of tg.5 IR: 5 of the rated value There shall be no evidence of deterioration and the marking shall be legible. / 5 (relative to the initial value) Increase of tg : 1. F,.3; 1. F,.2 IR: 5 of the rated value Measuring capacitance at test point b, d, f: haracteristic at lower category temperature -55 : -1% (b-d)/d % haracteristic at upper category temperature +15 : % (f-d)/d +1% I.R. (test at point f ): U R 1V: 75 M (.33μF) 25s (>.33μF) U R >1V: 15 M (.33μF) 5s (>.33μF) / 5 (relative to the initial value) Increase of tg :.3 ( 1.μF).2 (>1.μF) IR: 5 of the rated value 25 L25 Series Test method (GB 7332(IE )) Temperature:4 2 Humidity: %RH Duration: 56days +85,1.25 U R 2 h +1,1.25 Uc (Uc=.8U R ) 2 h +125 :.5 U R 1 h Static method: The apacitors should be kept at the following temperature in turn: a(2±2), b( 55±3), d(2±2), f(15±2), g(2±2) Ref.item 4.13 Times: 1 Duration of charging:.5s Duration of discharging:.5s harging voltage: rated voltage harging resistance: 22/ N ( ) or current intensity 1A(whichever is the less current intensity) Discharging resistance: R=U R /(1 N dv/dt) N : rated capacitance (μf) Quality ensuring test (before shipment): Inspection item(each batch) Inspection level (GB 2828) IL AQL Appearance inspection Dimensions S apacitance Tangent of the loss angle Dielectric strength Insulation resistance Solderability II S Page 9 of 12

10 Marking 25 L25 Series Taping specification 1. Taping Dimensions: Refer to table 2 2. Outline Drawing: Refer to Fig 1 ~ Fig 3 Specification ode Table 2 Taping Dimensions Dimensions P=7.5 P=1. Tolerance Note Unit: mm ode of Ammo Tapped A31 A211 A42 Digit 12 to 15 of P/N Taping type Fig 1 Fig 2 Fig3 Lead dia. d.5.5 ±.5 Taping pitch P ±1. 1mm(max)/2 P Feed hole pitch P ±.3 enter of wire P ±.7 enter of body P ±1.3 Pitch P omponent alignment S ±2. Pitch of taping wire F / 5. / Height of component from tape center Height of crankle from tape center H / 16. / ±.5 H ±.5 arrier tape width W Hold down tape width W 1min 1min Hole position W ±.5 Hold down tape sition W2 3.max Feed hole dia. D ±.2 Tape thickness t.7.7 ± Page 1 of 12

11 25 L25 Series Fig 1 Specification P=7.5mm ode of Ammo A31 Feed hole pitch P (mm) 12.7 Pitch of taping wire F(mm) / Height of crankle from tape center H(mm) 18.5 Specification Fig 2 P=7.5mm ode of Ammo A211 Feed hole pitch P (mm) 12.7 Pitch of taping wire F(mm) 5. Height of crankle from tape center H(mm) 2 Fig3 Specification P=1.mm ode of Ammo A42 Feed hole pitch P (mm) 12.7 Pitch of taping wire F(mm) / Height of crankle from tape center H(mm) 18.5 Page 11 of 12

12 Packing box sizes(mm) 1. Out packing box for bulk 2. Inner packing box for bulk 25 L25 Series 3. Box sizes for Ammo-pack Page 12 of 12