SPECIFICATION FOR APPROVAL

Transcription

1 RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F09 Product Name Product Type Metallized polypropylene film AC motor capacitor (column, aluminum case, anti-explosion) () Product Code Customer Customer Code Issue Date Xiamen Faratronic Co. Ltd. represented by ALFATEC GmbH & Co.KG Meckenloher Str Rednitzhembach / Germany Tel.: +49 (0) / Fax.: +49 (0) / info@alfatec.de *.The specification are the property of Xiamen Faratronic Co.Ltd and shall not be copied or used as commercial purposes without permission. Page 1 of 7

2 Metallized polypropylene film AC motor capacitor (column, aluminum case, anti-explosion) Outline Drawing Features Widely applied to starting and running of AC single-phase motors at 50Hz/60Hz frequency power Self-heading property Excellent stable performance and reliability Anti-explosion design, more safety Safety Approvals CQC GB/T :2005 A.C. motor capacitors 5.0μF~85.0μF, 450Vac 50/60Hz, Class C, P2, 40/70/21 Certificate No.: CQC VDE ( 德国 ) UL/CUL ( 美国 / 加拿大 ) EN :2013 A.C. motor capacitors 5.0μF~65μF, 450Vac 50/60Hz, Class C,S2,40/70/21 证书号 (Certificate No.): UL 810,CSA C22.2.No.190 capacitors, Protected, 10000AFC, max. 540Vac 50/60Hz, max. 90 证书号 (File No.): E232771, CCN:CYWT2/8 Specifications Reference Standard GB/T (IEC ) Climatic Category 40/70/21 Class of operation Class C (3 000h) Class of safety protection Rated Voltage Capacitance Range S2(P2) 450Vac, 50/60Hz 5.0μF~85.0μF Capacitance Tolerance ±5%, ±10%, ±15% Voltage Proof Between Terminals: Between Terminals And Case : Insulation Resistance 3 000s (20, 100V,1min) (50Hz~100Hz) Dissipation Factor (1kHz, C N 33μF) (1kHz, C N >33μF) 900Vac(2s) 3 000Vac(2s) Page 2 of 7

3 Part number system The 18 digits part number is formed as follow: C 6 5 Digit1 to 3 Digit 4 to 5 Digit 6 to 8 Digit 9 Digit 10 Series code =CBB65 AC rated voltage S2=450V Rated capacitance value For example : 505= pf= 5.0μF Capacitance tolerance J=±5%,K=±10% Dimension code CBB65 Dimension code D H Code D H Code D H Code D H Code D H Code B G M C H N D J P E K Q A F L R Digit 11 Internal use Digit 12 to 15 Terminals code Digit 16 to 18 Internal use Table 1 Terminals code Digit 12 Digit 13 Digit 14 Digit 15 Code Terminal form Code Fixed style Code length of lead wire Code With or without resistor 8 Two AMP250# per side 5 6 Bottom-bolt M8 Bottom-bolt M10 0 standard form R 0 With resistor Without resistor 7 Bottom-bolt M12 8 Ring-clip in the middle of case Page 3 of 7

4 Dimensions (mm) 450Vac 450Vac C N (μf) D±2 H±2 P±0.5 Part number C N (μf) D±2 H±2 P±0.5 Part number S **** S **** S **** S **** S **** S **** S **** S2406-H0**** S **** S2416-H0**** S **** S2426-H0**** S **** S2456-H0**** S **** S2466-H0**** S **** S2476-L0**** S **** S2486-L0**** S **** S2506-L0**** S **** S2526-L0**** S **** S2536-L0**** S **** S2556-L0**** S217E-50**** S2586-L0**** S **** S2476-J0**** S2256-B0**** S2486-J0**** S2266-B0**** S2506-J0**** S2306-D0**** S2526-J0**** S **** S2536-M0**** S **** S2546-M0**** S217E-30**** S2556-M0**** S **** S2586-M0**** S **** S2606-M0**** S **** S2636-M0**** S **** S2656-M0**** S **** S2536-K0**** S2336-F0**** S2556-K0**** S2356-F0**** S2586-K0**** S2366-F0**** S2606-K0**** S2406-F0**** S2636-N0****+++ Note: 1. - =capacitance tolerance code, K=±10%, J=±5% 2. **** =terminal form code(refer to table 1) S2656-N0**** S2696-N0**** S2706-N0**** S2756-Q0**** S2806-Q0**** S2856-Q0**** Sizes presented above are normally used dimension, other dimension can be produced in pursuance of customer's request. Sizes of terminals please refer to corresponding national standard. Page 4 of 7

5 Test Method And Performance No. Item Performance Test Method (IEC ) 1 Visual examination The condition, workmanship, marking and finish shall be satisfactory. 2 Sealing tests Liquids are allowed to wet the surface but not to form droplets The capacitors shall be mounted in a position likely to reveal leakage at a temperature : 80 C±2 C Test time: 1hours 3 Terminal strength 4 Vibration There shall be no visible damage There shall be no visible damage Capacitance change: 0.5% High voltage between terminal and case: 2000Vac, 60s, There shall be no permanent breakdown or flashover Tension: 20N f=10hz to 55Hz a=+/-0.35mm Test duration per axis = 10 frequency cycles (3 axes offset from each other by 90 C), 1 octave per minute, the total times are 135min for 3 axes 5 Damp heat test There shall be no visible damage Capacitance change: 0.5% High voltage between terminal and case: 2000Vac, 60s, There shall be no permanent breakdown or flashover Temperature: 40 C ±2 C + Humidity: %RH Duration: 21days 6 Endurance test 7 Self-healing test During test, no permanent breakdown, interruption or flashover shall occur. Liquids are allowed to wet the surface but not to form droplets Capacitance change: 3% There shall be no visible damage. The marking shall be legible. Change of capacitance: 0.5% Insulation resistor: IR 100s, charge voltage 100Vdc, 60s, temperature 20 C A total of 25 or more than clearings shall be obtained from 10 capacitors tested but if any capacitor shows more than five clearings, only five shall be used in calculating the total. Test time: 600 hours, Class C Temperature: 70 C Test voltage: 1.25 Un Continuous The capacitors shall be subjected to an a.c. voltage of 2.0Un, which is increased at a rate of not more than 200V/min. until five clearings have occurred since the beginning of the test or until the voltage has reach 3.5Un. The voltage shall be decreased to 0.8 times the value at which the fifth clearing occurs or 0.8 times 2.15Un whichever is lower and maintained for 10s. Page 5 of 7

6 No. Item Performance Test Method (IEC ) 8 Destruction tests a) Escaping liquid materials may wet the outer surface of the capacitor, but not fall away in drops; b) Internal live parts shall not be accessible to the standard test finger (see figure 1 of IEC 60529); c) Burning or scorching of the tissue paper shall not be evident, since this would indicate that flames or fiery particles had been emitted from the openings; d) Apply 1 600Va.c., 50/60Hz, 60s between terminal and container; there shall be no permanent breakdown or flashover. Preparation and pre-conditions: 80 C+/-2 C, Un, 2hours. No open circuit or open circuit capacitor are permitted Test temperature: 5 pieces passed endurance test: 80 C 5 pieces passed routine test: room temperature DC conditioning: The voltage shall be raised from zero to a maximum of 10Un at a rate of 200V/min until a short circuit occurs or 10Un has been reached. AC destruction test: Test voltage: 1.3Un If the capacitor clears (becomes operative) or becomes open circuit, the voltage shall be maintained for 5min. If the capacitor is still operative after 5min then the d.c. conditioning shall be repeated. If the capacitor becomes short circuit, then the test shall be maintained for 8 hours. Quality ensuring test (before shipment): Inspection item(each batch) Appearance inspection Dimensions Sealing tests Capacitance Tangent of the loss angle High voltage test between terminals High voltage test between terminal and container Inspection level (GB 2828) IL AQL Ⅱ 1.5% II 0.25% Insulation resistance Page 6 of 7

7 Marking Marking Introduction: 50μF±5% Brand CBB65 Type 450VAC Rated voltage Rated capacitance and tolerance 40/70/21 Climate category 50/60Hz Rated frequency C Running Class SH Clearing capacitor P2 Safety class CQC Approved UL and CUL Approved E CUL Approved CQC CQC Approved No. Protected 10,000AFC The protect current of UL and CUL Approved C22.2 NO.190 Approved Standard Polybutene oil The name of irrigation oil Making Time Page 7 of 7