PSB / RSB - (Expanded range)
|
|
|
- Avice Ramsey
- 5 years ago
- Views:
Transcription
1 Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case with resin sealing (UL 94 V-0). Flame retardant execution Construction Extended double side metallized carrier fi lm with internal series connection and metallized fi lm (refer to general technical information) Terminals Tinned copper wire (lead-free). 2x terminals (S=5±1mm, L=25±5mm terminals length), 4x terminals (SD=5,5±1,5mm) or 6x terminals (ST=5,5±1,5mm) execution Degree of protection IP00 Installation Whatever position assuring correct heat dissipation. Arrangement of many components with box walls in contact not admitted; suggested minimum distance between side by side elements 1/8 of the box thickness (B size) Reference standard IEC 61071, IEC 60068, RoHS compliant Climatic category 40/85/56 (IEC 60068/1), GPD (DIN40040) Operating temperature range (case) PSB: C (+100 C observing voltage and current de-rating) RSB: C Max. permissible ambient temperature PSB: +70 C, operation at rated power, current, voltage and natural cooling (+85 C observing voltage and current de-rating) RSB: +70 C operation at rated power,current, voltage and natural cooling Rated capacitance (Cr) 0,0047µF to 12µF. Refer to article table Capacitance tolerance (at 1kHz) ±10% (code=k), ±5% (code=j) and ±20% (code=m). Other tolerances upon request Capacitance temperature coefficient Refer to graphs in general technical information Long term stability (at 1 khz) Capacitance variation ±1% after a period of 2 years at standard environmental conditions Rated voltage (Ur), +85 C 700, 850, 1000, 1200, 1500, 2000, 2500, 3000 Vdc Temperature de-rated voltage PSB: for operating temperature (case)>+85 C, Ur must be decreased 1,5% for every C exceeding +85 C, Urms must be decreased 2,5% for every C exceeding +85 C RSB: Not applicable Non recurrent surge voltage (Upk), +85 C PSB: 1100, 1300, 1550, 1750, 2200, 2600, 3300, 4000 Vdc RSB: 950, 1200, 1300, 1600, 2000, 2400, 3000, 3500 Vdc Self inductance 1nH/mm of capacitor pitch Maximum pulse rise time Refer to article table Maximum peak current (Ipeak) Refer to article table. Max. non repetitive Ipk = 1,5 x Ipeak Dissipation factor (DF), max. Tgδ x10-4, measured at 25±5 C, 1kHz Cr 0,1μF 0,1μF<Cr 1μF 1μF<Cr 5,6μF 5,6μF<Cr 9μF Cr>9μF Insulation resistance (IR) 30000s but need not exceed 30GΩ (typical value), after 1 minute of electrification at 100Vdc (25 ± 5 C) Test voltage between terminals (Ut) 1,6xUr (DC) applied for 10s / 2xUr (DC) applied for 2s, at 25±5 C Test voltage between terminals and case (Utc) 3kV 50 60Hz applied for 60s at 25±5 C Damp heat test (steady state) Test conditions: Temperature= +40±2 C Relative humidity=93±2% Test duration= 56 days Performance: Capacitance change ±2% DF change at 1kHz IR 50% of initial limit value Typical capacitance change versus operating time -3% after hours at Urms or after hours at Ur Life expectancy (Ur); hours (Urms) Failure quota 300/10 9 component hours Resistance to soldering heat test Test conditions: Solder bath temperature= +260±5 C Dipping time (with heat screen)= 10±1s Performance: Capacitance change ±1% DF change at 1kHz IR 50% of initial limit value Warning: this specification must be completed with the data given in the General technical information chapter Ed.03 Rev
2 L 2 terminals execution B B H S L 5±1 P±0.4 d 25±5 4 terminals execution 6 terminals execution L B L B H SD H ST 5.5± ±1.5 P±0.5 d P1±0.5 P±0.5 d P1±0.5 P1±0.5 Dimensions in mm PSB / RSB article table (different values available upon request) , ,5 0,8 22, ,3 PSB *G# , ,5 26,5 0,8 22, ,5 9,5 PSB *G# , ,5 0,8 22, ,5 7 PSB *G# , ,8 27, ,5 8 PSB *H# , , ,5 6 PSB *H# , , , ,8 PSB *H# , ,2 27, ,8 PSB *H# , ,2 27,5 5, ,1 PSB *HSD ,2 27, ,2 PSB *H# ,2 27,5 10, ,5 PSB *HSD ,5 1,2 37, ,5 4 PSB *J# , ,2 27, ,5 4,2 RSB *H# , ,2 37, ,8 PSB *J# , ,5 1,2 37, ,5 11 5,6 RSB *J# , ,5 1,2 37, ,6 PSB *J# , ,5 1,2 37,5 10, ,9 PSB *JSD , ,2 27, ,3 RSB *H# , ,2 27,5 10, ,5 2,8 RSB *HSD ,2 37, ,9 RSB *J# ,5 1,2 37, ,2 PSB *J# ,5 1,2 37,5 10, ,5 2,5 PSB *JSD ,5 1,2 37, ,2 PSB *J#A ,5 1,2 37,5 10, ,5 2,5 PSB *JSDA , ,5 1,2 37, ,5 4,6 RSB *J# , ,5 1,2 37, ,1 PSB *J# , ,5 1,2 37,5 20, ,4 PSB *JSD Ed.03 Rev
3 , ,5 42,5 1,2 37, ,5 14 4,5 RSB *J# , ,5 1,2 37, ,7 PSB *J# (^) , ,5 1,2 37,5 20, ,5 2,2 PSB *JSD (^) , ,5 1,2 37, ,7 PSB *J#A , ,5 1,2 37,5 10, ,2 PSB *JSDA ,5 1,2 37, ,7 PSB *J# ,5 1,2 37,5 20, PSB *JSD ,5 1,2 37,5 10, ,9 PSB *JST , ,5 1,2 37, , RSB *J# , ,5 1,2 37,5 10, ,5 19,5 3,3 RSB *JSD , ,5 1,2 37, ,7 PSB *J# , ,5 1,2 37,5 20, PSB *JSD , ,5 1,2 37,5 10, ,5 1,9 PSB *JST ,5 1,2 52, ,1 PSB *R# ,5 1,2 52,5 20, ,4 PSB *RSD , ,5 1,2 37, ,5 14 3,4 RSB *J# , ,5 1,2 37,5 20, ,5 24,5 2,7 RSB *JSD , ,5 1,2 52, ,9 PSB *R# , ,5 1,2 52,5 20, ,2 PSB *RSD , ,5 1,2 52,5 10, ,1 PSB *RST ,5 1,2 37, ,4 RSB *J# ,5 1,2 37,5 20, ,7 RSB *JSD ,5 1,2 52, ,9 PSB *R# ,5 1,2 52,5 20, ,2 PSB *RSD ,5 1,2 52,5 10, ,5 2,1 PSB *RST , ,5 1,2 52, ,6 PSB *R# , ,5 1,2 52,5 20, ,9 PSB *RSD , ,5 1,2 52,5 10, ,8 PSB *RST , ,5 1,2 52, ,6 PSB *R# , ,5 1,2 52,5 20, ,9 PSB *RSD , ,5 1,2 52,5 10, ,5 1,8 PSB *RST , ,5 1,2 52, RSB *R# , ,5 1,2 52,5 20, ,5 3,3 RSB *RSD , ,5 57,5 1,2 52,5 20, ,8 PSB *RSD , ,5 57,5 1,2 52,5 10, ,5 1,7 PSB *RST ,5 57,5 1,2 52,5 20, ,7 PSB *RSD ,5 57,5 1,2 52,5 10, ,6 PSB *RST ,5 1,2 52, ,2 RSB *R# ,5 1,2 52,5 20, ,5 RSB *RSD ,5 1,2 52,5 10, ,4 RSB *RST ,5 57,5 1,2 52,5 20, ,2 RSB *RSD ,5 57,5 1,2 52,5 10, ,1 RSB *RST , ,5 0,8 22, , PSB *G# , ,5 26,5 0,8 22, ,0 10,4 PSB *G# , ,5 0,8 22, ,5 6,5 7,5 PSB *G# , ,8 27, ,5 8,6 PSB *H# , , ,4 8 6,4 PSB *H# , , , ,6 10 4,9 PSB *H# , ,2 27, ,4 14 3,9 PSB *H# , ,2 27,5 10, ,4 16,5 3,2 PSB *HSD , ,5 27, ,6 RSB *H# , ,2 27, ,6 14 3,3 PSB *H# , ,2 27,5 10, ,6 20,5 2,6 PSB *HSD , ,5 1,2 37, ,3 PSB *J# , ,2 27, ,1 RSB *H# , ,2 37, ,8 PSB *J# ,2 27, ,6 RSB *H# ,2 27,5 10, ,9 RSB *HSD ,5 1,2 37, ,3 PSB *J# ,5 1,2 37,5 10, ,5 2,6 PSB *JSD , ,2 37, ,5 6,1 RSB *J# , ,5 42,5 1,2 37, ,1 PSB *J# , ,5 42,5 1,2 37,5 10, ,4 PSB *JSD Ed.03 Rev
4 , ,5 1,2 37, ,5 5,5 RSB *J# , ,5 1,2 37, ,9 PSB *J# , ,5 1,2 37,5 20, ,3 PSB *JSD , ,5 1,2 37, ,9 PSB *J#A , ,5 1,2 37,5 10, ,3 PSB *JSDA ,5 1,2 37, ,9 RSB *J# ,5 1,2 37,5 10, ,2 RSB *JSD ,5 1,2 37, ,9 RSB *J#A ,5 1,2 37,5 10, ,2 RSB *JSDA ,5 1,2 37, ,7 PSB *J# ,5 1,2 37,5 20, ,1 PSB *JSD ,5 1,2 37,5 10, PSB *JST , ,5 1,2 37, ,8 RSB *J# , ,5 1,2 37,5 20, ,5 4,1 RSB *JSD , ,5 1,2 37, ,7 PSB *J# , ,5 1,2 37,5 20, ,1 PSB *JSD , ,5 1,2 37,5 10, PSB *JST , ,5 1,2 37, ,4 RSB *J# , ,5 1,2 37,5 10, ,7 RSB *JSD , ,5 1,2 52, ,9 PSB *R# , ,5 1,2 52,5 20, ,2 PSB *RSD ,5 1,2 37, ,0 RSB *J# ,5 1,2 37,5 20, ,3 RSB *JSD ,5 1,2 52, PSB *R# ,5 1,2 52,5 20, ,3 PSB *RSD ,5 1,2 52,5 10, ,2 PSB *RST , ,5 1,2 37, ,9 RSB *J# , ,5 1,2 37,5 20, ,2 RSB *JSD , ,5 1,2 52, ,6 PSB *R# , ,5 1,2 52,5 20, PSB *RSD , ,5 1,2 52,5 10, ,1 PSB *RST ,5 1,2 52, ,3 RSB *R# ,5 1,2 52,5 20, ,7 RSB *RSD ,5 1,2 52, ,6 PSB *R# ,5 1,2 52,5 20, PSB *RSD ,5 1,2 52,5 10, ,5 1,9 PSB *RST , ,5 1,2 52, ,5 PSB *R# , ,5 1,2 52,5 20, ,9 PSB *RSD , ,5 1,2 52,5 10, ,5 1,8 PSB *RST , ,5 57,5 1,2 52,5 20, ,7 PSB *RSD , ,5 57,5 1,2 52,5 10, ,6 PSB *RST , ,5 1,2 52, ,6 RSB *R# , ,5 1,2 52,5 20, ,5 3 RSB *RSD ,5 57,5 1,2 52,5 20, ,7 PSB *RSD ,5 57,5 1,2 52,5 10, ,6 PSB *RST , ,5 57,5 1,2 52,5 20, ,7 RSB *RSD , ,5 57,5 1,2 52,5 10, ,5 2,6 RSB *RST ,5 57,5 1,2 52,5 20, ,4 RSB *RSD ,5 57,5 1,2 52,5 10, ,3 RSB *RST , ,5 0,8 22, ,7 3,5 18,5 PSB *G# ,068 8, ,5 0,8 22, ,4 4,5 13,7 PSB *G# , ,5 0,8 22, ,5 9,9 PSB *G# , ,8 27, PSB *H# , ,5 0,8 22, ,3 PSB *G# , ,8 27, ,5 8,2 PSB *H# , , ,5 5,7 PSB *H# , ,2 27, ,5 4,5 PSB *H# , ,2 27, ,7 PSB *H# , ,2 27,5 10, PSB *HSD , ,5 1,2 37, ,9 12 4,7 PSB *J# , ,2 27, PSB *H# , ,2 27,5 10, ,5 2,3 PSB *HSD , ,5 1,2 37, ,5 5,9 RSB *J# , ,5 1,2 37, ,6 14 4,1 PSB *J# , ,5 1,2 37,5 10, ,6 17 3,4 PSB *JSD Ed.03 Rev
5 ,5 1,2 37, ,7 RSB *J# ,5 1,2 37,5 10, ,5 4 RSB *JSD ,5 1,2 37, ,6 PSB *J# ,5 1,2 37,5 10, ,9 PSB *JSD ,5 1,2 37, ,6 PSB *J#A ,5 1,2 37,5 10, ,9 PSB *JSDA , ,5 1,2 37, RSB *J# , ,5 1,2 37,5 10, ,5 3,3 RSB *JSD , ,5 1,2 37, PSB *J# , ,5 1,2 37,5 20, ,3 PSB *JSD , ,5 1,2 37, PSB *J#A (^) , ,5 1,2 37,5 10, ,5 2,3 PSB *JSDA (^) , ,5 1,2 37, ,9 RSB *J# , ,5 1,2 37,5 10, ,5 3,2 RSB *JSD ,5 1,2 37, ,9 RSB *J# ,5 1,2 37,5 20, ,2 RSB *JSD ,5 1,2 52, ,4 PSB *R# ,5 1,2 52,5 20, ,7 PSB *RSD , ,5 1,2 37, ,8 RSB *J# , ,5 1,2 37,5 20, ,1 RSB *JSD , ,5 1,2 52, ,3 PSB *R# , ,5 1,2 52,5 20, ,6 PSB *RSD ,5 1,2 52, ,9 RSB *R# ,5 1,2 52,5 20, ,5 3,2 RSB *RSD ,5 1,2 52, ,9 PSB *R# ,5 1,2 52,5 20, ,2 PSB *RSD ,5 1,2 52,5 10, ,5 2,1 PSB *RST , ,5 1,2 52, ,8 RSB *R# , ,5 1,2 52,5 20, ,1 RSB *RSD , ,5 1,2 52, ,8 PSB *R# , ,5 1,2 52,5 20, ,1 PSB *RSD , ,5 1,2 52,5 10, ,5 2 PSB *RST ,5 1,2 52, ,5 RSB *R# ,5 1,2 52,5 20, ,8 RSB *RSD ,5 57,5 1,2 52,5 20, PSB *RSD ,5 57,5 1,2 52,5 10, ,9 PSB *RST , ,5 57,5 1,2 52,5 20, ,8 PSB *RSD (^) , ,5 57,5 1,2 52,5 10, ,5 1,7 PSB *RST (^) , ,5 1,2 52, ,3 RSB *R# , ,5 1,2 52,5 20, ,7 RSB *RSD , ,5 57,5 1,2 52,5 20, ,5 RSB *RSD , ,5 57,5 1,2 52,5 10, ,4 RSB *RST ,5 57,5 1,2 52,5 20, ,4 RSB *RSD ,5 57,5 1,2 52,5 10, ,3 RSB *RST , ,5 0,8 22, PSB *G# ,047 8, ,5 0,8 22, ,5 16,9 PSB *G# , ,5 26,5 0,8 22, ,5 12,7 PSB *G# , ,8 27, ,5 14,3 PSB *H# , ,5 0,8 22, ,7 PSB *G# , ,8 27, ,6 PSB *H# , , ,5 7,6 PSB *H# , , , ,5 5,4 PSB *H# , ,2 27, ,5 4,3 PSB *H# , ,2 27,5 10, ,5 3,6 PSB *HSD , ,5 1,2 37, ,5 5,9 PSB *J# , ,2 27, ,4 12,5 5,7 RSB *H# , ,2 27, ,4 PSB *H# , ,2 27,5 10, ,5 2,7 PSB *HSD , ,5 1,2 37, ,5 4,8 PSB *J# , ,2 27, ,6 14 5,0 RSB *H# , ,2 27,5 10, ,6 16 4,3 RSB *HSD , ,2 37, ,6 11,5 6,1 RSB *J# , ,5 42,5 1,2 37, ,1 PSB *J# , ,5 42,5 1,2 37,5 10, ,5 3,4 PSB *JSD Ed.03 Rev
6 , ,5 1,2 37, ,4 13 5,4 RSB *J# , ,5 1,2 37, ,8 PSB *J# , ,5 1,2 37,5 10, ,5 3,1 PSB *JSD ,5 1,2 37, ,8 RSB *J# ,5 1,2 37,5 10, ,5 4,1 RSB *JSD ,5 1,2 37, ,5 PSB *J# ,5 1,2 37,5 20, ,8 PSB *JSD ,5 1,2 37, ,5 PSB *J#A ,5 1,2 37,5 10, ,5 2,8 PSB *JSDA , ,5 1,2 37, ,4 RSB *J# , ,5 1,2 37,5 10, ,7 RSB *RSD , ,5 1,2 37, ,2 PSB *J# , ,5 1,2 37,5 20, ,5 PSB *JSD , ,5 1,2 37, RSB *J# (^) , ,5 1,2 37,5 10, ,5 3,3 RSB *JSD (^) , ,5 1,2 37, ,9 PSB *J# , ,5 1,2 37,5 20, ,2 PSB *JSD ,5 1,2 52, PSB *R# ,5 1,2 52,5 20, ,5 2,5 PSB *RSD ,5 1,2 52,5 10, ,4 PSB *RST , ,5 1,2 52, ,4 RSB *R# , ,5 1,2 52,5 10, ,7 RSB *RSD , ,5 1,2 52, PSB *R# , ,5 1,2 52,5 20, ,4 PSB *RSD , ,5 1,2 52,5 10, ,3 PSB *RST , ,5 1,2 52, ,2 RSB *R# , ,5 1,2 52,5 20, ,5 RSB *RSD , ,5 1,2 52, ,5 14 2,8 PSB *R# , ,5 1,2 52,5 20, ,5 27 2,2 PSB *RSD , ,5 1,2 52,5 10, ,5 32 2,1 PSB *RST , ,5 1,2 52, ,7 RSB *R# , ,5 1,2 52,5 20, RSB *RSD , ,5 57,5 1,2 52,5 20, , PSB *RSD , ,5 57,5 1,2 52,5 10, ,5 36 1,9 PSB *RST , ,5 57,5 1,2 52,5 20, ,9 PSB *RSD , ,5 57,5 1,2 52,5 10, ,5 1,8 PSB *RST ,5 57,5 1,2 52,5 20, ,6 RSB *RSD ,5 57,5 1,2 52,5 10, ,5 RSB *RST , ,5 57,5 1,2 52,5 20, ,4 RSB *RSD , ,5 57,5 1,2 52,5 10, ,3 RSB *RST , ,5 0,8 22, ,5 30 PSB *G# ,033 8, ,5 0,8 22, ,5 3,5 22 PSB *G# , ,5 26,5 0,8 22, ,5 4 16,5 PSB *G# , ,8 27, ,3 4 18,2 PSB *H# , ,5 0,8 22, ,5 12,3 PSB *G# , ,8 27, ,2 5 13,8 PSB *H# , ,8 27, ,5 9,5 PSB *H# , , , ,5 7,1 PSB *H# , ,2 27, ,5 5,1 PSB *H# , ,2 27,5 10, ,4 PSB *HSD , ,5 1,2 37, ,4 10,5 6,9 PSB *J# , ,2 27, RSB *H# , ,2 27, ,1 PSB *H# , ,2 27,5 10, ,4 PSB *HSD , ,5 1,2 37, ,6 12,5 5,4 PSB *J# , ,2 27, ,8 RSB *H# , ,2 27,5 10, ,5 4,1 RSB *HSD , ,5 42,5 1,2 37, ,4 14 4,5 PSB *J# , ,5 42,5 1,2 37,5 10, ,4 16 3,8 PSB *JSD , ,2 37, ,5 6,1 RSB *J# , ,5 1,2 37, ,2 14 4,2 PSB *J# , ,5 1,2 37,5 10, ,2 19,5 3,5 PSB *JSD Ed.03 Rev
7 , ,5 42,5 1,2 37, ,5 RSB *J# , ,5 1,2 37, ,6 14 3,9 PSB *J# , ,5 1,2 37,5 10, ,6 20,5 3,2 PSB *JSD , ,5 1,2 37, ,6 14 3,9 PSB *J#A , ,5 1,2 37,5 10, ,6 22 3,2 PSB *JSDA , ,5 1,2 37, ,6 PSB *J# , ,5 1,2 37, ,5 2,9 PSB *JSD ,5 1,2 37, ,8 RSB *J# ,5 1,2 37,5 20, ,1 RSB *JSD ,5 1,2 37, ,8 RSB *J#A ,5 1,2 37,5 10, ,5 4,1 RSB *JSDA ,5 1,2 37, ,3 PSB *J# ,5 1,2 37,5 20, ,6 PSB *JSD , ,5 1,2 52, ,6 PSB *R# , ,5 1,2 52,5 20, ,9 PSB *RSD , ,5 1,2 37, RSB *J# , ,5 1,2 37,5 20, ,3 RSB *JSD , ,5 1,2 52, ,5 14 3,3 PSB *R# , ,5 1,2 52,5 20, ,5 27 2,6 PSB *RSD , ,5 1,2 52, ,1 PSB *R# , ,5 1,2 52,5 20, ,4 PSB *RSD , ,5 1,2 52,5 10, ,5 2,3 PSB *RST ,5 1,2 52, ,3 RSB *R# ,5 1,2 52,5 20, ,5 3,6 RSB *RSD , ,5 1,2 52, ,2 RSB *R# , ,5 1,2 52,5 20, ,5 3,5 RSB *RSD , ,5 57,5 1,2 52,5 20, PSB *RSD , ,5 57,5 1,2 52,5 10, ,5 2,3 PSB *RSD , ,5 1,2 52, , RSB *R# , ,5 1,2 52,5 20, ,5 26 3,3 RSB *RSD , ,5 57,5 1,2 52,5 20, ,5 27 2,2 PSB *RSD (^) , ,5 57,5 1,2 52,5 10, ,5 35 2,1 PSB *RST (^) , ,5 57,5 1,2 52,5 20, ,5 27 2,8 RSB *RSD , ,5 57,5 1,2 52,5 10, ,5 31 2,7 RSB *RST , ,5 0,8 22, PSB *G# ,022 8, ,5 0,8 22, PSB *G# , ,5 0,8 22, ,8 4,5 20,5 PSB *G# , ,8 27, ,1 4 23,7 PSB *H# , ,5 0,8 22, ,2 5 14,8 PSB *G# , ,8 27, ,8 4,5 16,8 PSB *H# , ,8 27, ,4 6 12,1 PSB *H# , , , ,5 8,4 PSB *H# , ,2 27, ,5 11 6,5 PSB *H# , ,2 27,5 10, ,5 12,5 5,8 PSB *HSD , ,5 1,2 37, ,5 8,1 PSB *J# , ,2 27, ,1 RSB *H# , ,2 27, ,2 PSB *H# , ,2 27,5 10, ,5 PSB *HSD , ,5 1,2 37, ,9 PSB *J# , ,2 27, ,8 RSB *H# , ,2 27,5 10, ,5 5,1 RSB *HSD , ,5 1,2 37, ,6 11 7,4 RSB *J# , ,5 1,2 37, ,9 PSB *J# , ,5 1,2 37,5 10, ,5 4,2 PSB *JSD , ,5 1, ,9 PSB *J#A , ,5 1,2 37,5 10, ,2 PSB *JSDA , ,5 42,5 1,2 37, ,4 13 6,1 RSB *J# , ,5 1,2 37, ,1 PSB *J# , ,5 1,2 37,5 20, ,4 PSB *JSD , ,5 1,2 37, ,1 PSB *J#A , ,5 1,2 37,5 10, ,5 3,4 PSB *JSDA , ,5 1,2 37, ,8 PSB *J# , ,5 1,2 37,5 20, ,5 3,1 PSB *JSD Ed.03 Rev
8 , ,5 1,2 37, ,6 14 5,4 RSB *J# , ,5 1,2 37,5 10, ,6 17 4,7 RSB *JSD , ,5 1,2 37, ,6 14 5,4 RSB *J#A , ,5 1,2 37,5 10, ,6 18,5 4,7 RSB *JSDA , ,5 1,2 52, ,4 14 4,4 PSB *R# , ,5 1,2 52,5 20, ,4 22 3,6 PSB *RSD , ,5 1,2 37, ,4 14 4,9 RSB *J# , ,5 1,2 37,5 20, ,4 20 4,2 RSB *JSD , ,5 1,2 52, ,6 14 3,9 PSB *R# , ,5 1,2 52,5 20, ,6 23,5 3,2 PSB *RSD ,5 1,2 37, ,5 RSB *J# ,5 1,2 37,5 20, ,5 3,8 RSB *JSD ,5 1,2 52, ,6 PSB *R# ,5 1,2 52,5 20, ,9 PSB *RSD , ,5 1,2 52, ,8 RSB *R# , ,5 1,2 52,5 20, ,5 4,1 RSB *RSD , ,5 1,2 52, ,3 PSB *R# , ,5 1,2 52,5 20, ,6 PSB *RSD , ,5 1,2 52,5 10, ,5 2,5 PSB *RST , ,5 1,2 52, ,5 14 4,4 RSB *R# , ,5 1,2 52,5 20, ,5 24,5 3,7 RSB *RSD , ,5 57,5 1,2 52,5 20, ,3 PSB *RSD , ,5 57,5 1,2 52,5 10, ,2 PSB *RST , ,5 57,5 1,2 52,5 20, ,2 PSB *RSD (^) , ,5 57,5 1,2 52,5 10, ,5 2,1 PSB *RST (^) , ,5 57,5 1,2 52,5 20, ,1 RSB *RSD , ,5 57,5 1,2 52,5 10, ,5 3 RSB *RST , ,5 0,8 22, ,2 1,5 70 PSB *G# ,01 8, ,5 0,8 22, PSB *G# , ,5 26,5 0,8 22, ,5 2,5 36 PSB *G# , ,5 0,8 22, ,8 3,5 26,5 PSB *G# , ,8 27, ,7 3,5 30,5 PSB *H# , ,8 27, ,5 4 22,5 PSB *H# , ,5 32 0,8 27, ,4 5,5 16 PSB *H# , , ,8 8,5 11,3 PSB *H# , ,2 27, ,5 7,6 PSB *H# , ,2 27,5 10, ,5 6,9 PSB *HSD , ,5 1,2 37, ,5 PSB *J# , ,2 27, ,5 10 9,1 RSB *H# , ,2 27, ,5 13,5 6 PSB *J# , ,2 27,5 10, ,5 14,5 5,3 PSB *JSD , ,5 1,2 37, ,5 10,5 7,9 PSB *J# , ,2 27, ,5 7,1 RSB *H# , ,2 37, ,3 RSB *J# , ,5 1,2 37, PSB *J# , ,5 1,2 37,5 10, ,3 PSB *JSD , ,5 1,2 37, PSB *J#A , ,5 1,2 37,5 10, ,3 PSB *JSDA , ,5 1,2 37, ,8 PSB *J# , ,5 1,2 37,5 10, PSB *JSD , ,5 1,2 37, ,7 RSB *J# , ,5 1,2 37,5 10, ,5 6 RSB *JSD , ,5 1,2 37, ,5 14 4,6 PSB *J# , ,5 1,2 37,5 20, ,5 19,5 3,9 PSB *JSD , ,5 1,2 37, ,5 14 4,4 PSB *J# , ,5 1,2 37,5 20, ,5 22 3,5 PSB *JSD , ,5 1,2 37, ,5 RSB *J# , ,5 1,2 37,5 10, ,5 4,8 RSB *JSD , ,5 1,2 37, ,5 RSB *J#A , ,5 1,2 37,5 10, ,8 RSB *JSDA , ,5 1,2 52, ,5 14 4,7 PSB *R# , ,5 1,2 52,5 20, , PSB *RSD , ,5 1,2 52, ,3 PSB *R# , ,5 1,2 52,5 20, ,5 3,6 PSB *RSD Ed.03 Rev
9 , ,5 1,2 52, , RSB *R# , ,5 1,2 52,5 20, ,4 18 5,1 RSB *RSD , ,5 1,2 52, , PSB *R# , ,5 1,2 52,5 20, ,5 24,5 3,3 PSB *RSD , ,5 1,2 52, ,6 14 5,3 RSB *R# , ,5 1,2 52,5 20, ,6 20 4,6 RSB *RSD , ,5 1,2 52, ,6 PSB *R# , ,5 1,2 52,5 20, ,5 3 PSB *RSD ,5 1,2 52, ,9 RSB *R# ,5 1,2 52,5 20, ,2 RSB *RSD ,5 57,5 1,2 52,5 20, ,8 PSB *RSD ,5 57,5 1,2 52,5 10, ,5 2,7 PSB *RST , ,5 1,2 52, ,4 RSB *R# , ,5 1,2 52,5 20, ,7 RSB *RSD , ,5 57,5 1,2 52,5 20, ,3 RSB *RSD , ,5 57,5 1,2 52,5 10, ,2 RSB *RST , ,5 0,8 22, ,6 1,5 87 PSB *G# ,0068 8, ,5 0,8 22, , PSB *G# , ,5 0,8 22, ,5 46 PSB *G# , ,8 27, ,5 2,5 54 PSB *H# , ,5 0,8 22, , PSB *G# , ,8 27, , PSB *H# , ,8 27, ,7 4 26,5 PSB *H# , ,5 32 0,8 27, , PSB *H# , , ,4 7,5 14 PSB *H# , ,2 27,5 10, ,4 8,5 13,3 PSB *HSD , ,2 27, , ,4 PSB *H# , ,2 27,5 10, ,8 11 9,6 PSB *HSD , ,5 1,2 37, ,5 12,3 PSB *J# , ,2 27, RSB *H# , ,5 1,2 37, ,5 RSB *J# , ,5 1,2 37, ,5 9,3 PSB *J# , ,5 1,2 37,5 10, ,5 8,6 PSB *JSD , ,5 1,2 37, ,3 PSB *J# , ,5 1,2 37,5 10, ,5 7,6 PSB *JSD , ,2 27, ,5 12 8,5 RSB *H# , ,2 37, ,5 9 10,8 RSB *J# , ,5 1,2 37, ,7 PSB *J# , ,5 1,2 37,5 20, PSB *JSD , ,5 1,2 37, ,7 PSB *J#A , ,5 1,2 37,5 10, PSB *JSDA , ,5 1,2 37, PSB *J# , ,5 1,2 37,5 10, ,5 5,3 PSB *JSD , ,5 1,2 37, ,5 8,1 RSB *J# , ,5 1,2 37,5 10, ,5 7,4 RSB *JSD , ,5 1,2 37, ,5 8,1 RSB *J#A , ,5 1,2 37,5 10, ,4 RSB *JSDA , ,5 1,2 37, ,1 PSB *J# , ,5 1,2 37,5 20, ,5 4,4 PSB *JSD , ,5 1,2 37, ,5 14 6,2 RSB *J# , ,5 1,2 37,5 10, ,5 18 5,5 RSB *JSD , ,5 1,2 52, ,1 PSB *R# , ,5 1,2 52,5 20, ,5 4,4 PSB *RSD , ,5 1,2 52, ,5 14 6,6 RSB *R# , ,5 1,2 52,5 10, ,5 18 5,9 RSB *RSD , ,5 1,2 52, ,6 PSB *R# , ,5 1,2 52,5 20, ,5 3,9 PSB *RSD , ,5 57,5 1,2 52,5 20, ,5 3,6 PSB *RSD , ,5 57,5 1,2 52,5 10, ,5 3,5 PSB *RST , ,5 57,5 1,2 52,5 20, ,5 3,5 PSB *RSD , ,5 57,5 1,2 52,5 10, ,5 3,4 PSB *RST , ,5 1,2 52, ,9 RSB *R# , ,5 1,2 52,5 20, ,5 5,2 RSB *RSD , ,5 1,2 52, ,3 RSB *R# , ,5 1,2 52,5 20, ,5 4,6 RSB *RSD ,5 57,5 1,2 52,5 20, RSB *RD ,5 57,5 1,2 52,5 10, ,5 3,9 RSB *RST Ed.03 Rev
Failure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
PPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
THZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
MHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
MAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
MSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
Temperature= +40±2 C Capacitance change ±3%
MS - (Expanded range; new lugs) MKP - Switching - igh current - DC-ink - AC Main applications DC-ink, switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters
MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
Energy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
Metallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
Metallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
CAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise
CAPACITOR CATALOG SPE GROUP Capacitor & Diode ISO Professional Manufacturer To Support the success of enterprise To Support a successful enterprise SUNTAP ELECTRONICS GROUP CO.,LTD. Tel: +86 020 84122024
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
Snubber, High Current DC, and Switching Capacitors
GTC 005 2011 Snubber, High Current DC, and Switching Capacitors Genteq Capacitors 1946 West Cook Road, Fort Wayne, Indiana 46818 USA Phone: (260) 416-5400 Fax: (260) 416-5460 Email: capacitors@regalbeloit.com
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
Common to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
Applications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Applications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
Metallized Polypropylene Film Capacitor (Plastic Case) AC Application (2 or 4 pins)
The series is a polypropylene metallized film capacitor with plastic casing sealed with epoxy. This capacitor is suitable for use in AC filter circuits, Solar Inverter and Industrial Inverter. FEATURES
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
High Security Capacitors with controllable metallized frame layers
Replacement for CKM 501-4 BG series Applications Railway Signal Systems High Reliability Circuits Main Characteristics High Reliability Controllable Metallized frame layers Compliant to standards NF F
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
Metallized Polypropylene Film Capacitors PCPW 245 ( DC-link application )
FEATURE ㆍHigh capacitance density dc-link capacitor ㆍHigh safety, Self-healing and self-protecting function built in ㆍLong product life, high reliability ㆍLow loss dielectric APPLICATION For DC filtering,
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
MMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
Plastic Film Capacitors
Film Capacitor for AC Motor Type : PMF Series Features High safety (safety function installed) High reliability, safety standard approval Small size, lightness, and low loss RoHS directive compliant Recommended
Snubber Capacitors. Film Capacitors for. RoHS COMPLIANT. Intelligent Capacitor Solutions
Snubber Capacitors Film Capacitors for IGBT Power Electronics Applications RoHS COMPLIANT Intelligent Capacitor Solutions As a world-class supplier of capacitors for industrial, medical and specialty applications,
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
CAPACITORS FOR POWER ELECTRONICS
Table of contents page 1. Introduction 2 2. Applications & Definitions 3 3. Capacitor Construction 5 4. Safety 5 5. Operating life 6 6. Mounting and operating instructions 7 7. Calculation example 8 8.
EMC- Components. Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology. Data Book Supplement
EMC- Components Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology Data Book Supplement Vakatseite (( 2 )) Feed- Through Capacitors Feed- Through Filters B85121 B85321 1 General
1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
SPECIFICATION FOR APPROVAL
RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F11 Product Name Product Type Metallized polypropylene film AC motor capacitor(box-type) () Product Code Customer Customer Code Issue Date
UL Recognised Wirewound Resistors
UL1412 recognised fusible resistor * Failsafe mains fusing at 12 / 24Vrms Inrush and surge withstanding UL94-V flameproof coating SMD leadform option available RoHS compliant * UL file number E23449. Electrical
SELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
Product Data Sheets. C.27/4 Series C.27/6 Series C.27/7 Series
Product Data Sheets C.27/4 Series C.27/6 Series C.27/7 Series 11 C.27/4 TYPICAL APPLICATIONS: the capacitor is used in series to the start-winding of the singlephase electric motor, allowing its starting
(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
Applications R47 5 I M
R47 Series, Class X2, 520 VAC, 85ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the
SELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
S J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
PhiCap Capacitors for Power Factor Correction
PhiCap Capacitors for Power Factor Correction Product Profile 2000 http://www.epcos.com PhiCap AC Capacitors for Power Factor Correction General The PhiCap series, is a well approved and reliable EPCOS
Radial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
POWER CAPACITORS. Cylindrical capacitor standard duty
Construction Dielectric: Polypropylene film Non PCB, Soft Polyurethane resin Extruded round aluminium can with stud Provided with discharge resistors Overpressure disconnector Features Three phase, delta
Dimensions mm. IMax Multiplier 1kHz 10kHz. Ambient Temperature. Fixing symbol code
UPGRADE! MLC Cylindrically-Shaped Metallized Polypropylene Fim Capacitos Features Cylindrically-shaped capacitor with big capacitance for wind & solar power inverters, other inverters, chopper control
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
NMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters
NMA 5V, 12V & 15V Series FEATURES RoHS compliant Effi ciency up to 80% Power density up to 0.85W/cm 3 Wide temperature performance at full 1 Watt load, 40 C to 85 C Dual output from a single input rail
P-Series 11 to to to to to to to 1100 >1000 <25
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
PLASTIC FILM CAPACITORS
System chart Metallized polyester MDDS,MDD - For general electronic devices - For communication devices - For computer control devices - For power circuits MDDSA Metallized polypropylene MDD-P FMDD-P MMX
SFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
General Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
Applications. Internal Connection
Overview Polypropylene metallized film with cylindrical aluminium can type filled with oil, 3 phase terminal delta and safety device FPU. Applications Typical applications include power factor correction.
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
KEMET Part Number: C276CC35250AA1J
KEMET Part Number: C276CC35250AA1J Film, Film/Foil Polypropylene, Motor Run, C276, 25 uf, 5%, 470 V D Threaded Mounting Stud M8 x 10 Double Fast-On L 2 13.5±0.5 5.5 6.3 x 0.8 13.4±0.5 10±0.5 General Information
Features. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
Ceramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Crimped taping. W NOTE: Straight lead not recommended Explanation of Part Number for Odd Size Taping
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
High Power Film Capacitors
The TRAFIM series is specifically designed for DC filtering applications such as DC link or resonant filters for voltages up to 6000V. Large case sizes up to 46 liters and high specific energy up to 390J/l
El-Ci-Ar neotroniks Pvt Ltd 68 Hadapsar Ind Estate, Pune , India
El-Ci-Ar neotroniks Pvt Ltd 68 Hadapsar Ind Estate, Pune 411013, India MKP52 - Self healing Snubber Capacitors Features Oil Impregnated for Good Corona Resistance Dielectric - Polypropylene Electrode -
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
UL9 SERIES. Medium Power Film. DC Link Filter Capacitor
DC Link Filter Capacitor UL9 SERIES Medium Power Film The UL9 is a metallized polypropylene film capacitor designed to handle the heavy load of power applications, typical in DC Link applications. The
CAPACITORS FOR POWER ELECTRONICS
CAPACITORS FOR POWER ELECTRONICS Positive Development in Power Electronics INDEX Page No: 0. CONTENTS 1 1. INTRODUCTION 2 2. APPLICATION 2 3. DEFINITIONS 3 4. CAPACITOR CONSTRUCTION 5 5. CAPACITOR SAFETY
Disc Type Capacitors with Lead (High Voltage Ceramic Capacitors) Product Guide
Disc Type Capacitors with Lead (High Voltage Ceramic Capacitors) Product Guide Series Categories Characteristic Page CK45 CC45 CK45-RR CD CS CK45-RR CS Commercial Grade Commercial Grade / Low Dissipation
HARMONIC FILTER REACTOR
380V 50Hz Series Resonance Frequency : 204Hz or p = 6% To be used with 415V capacitor only Design : According to VDE 0550/0532 & IEC 76 l 250 = 0.31 x l N Testing : Insulation strength tested at 2.5kV
Applications F5A H C 4100 DQ A 6 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf)
F5A Series Metallized Polyester Film with Integrated Ceramic Varistor, 18 63 VDC Overview The F5A Series is a metallized polyester (MKT) film capacitor with integrated ceramic varistor encapsulated in