PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
|
|
|
- Russell Goodman
- 5 years ago
- Views:
Transcription
1 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency applications demanding stable operation. Polypropylene film capacitor with vacuum evaporated aluminum electrodes. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. p d 0.5 b H l Rated voltage U R, VDC Rated voltage U R, VAC Capacitance range, µf Capacitance values Capacitance tolerance Category temperature range Rated temperature Voltage derating Climatic category Passive flammability Maximum pulse steepness: Temperature coefficient Self-inductance Dissipation factor tanδ Insulation resistance TECHNICAL DATA In accordance with IEC E12 series ±5%, other tolerances on request C +85 C The rated voltage is decreased with 1.3%/ C between +85 C and +105 C. IEC , 55/105/56/B Category B according to IEC du/dt according to article table For peak to peak voltages lower than rated voltage (U PP < U R ), the specified du/dt can be multiplied by the factor U R /U PP. 200 (+50, 100) ppm/ C (at 1 khz) Approximately 6 nh/cm for the total length of capacitor winding and the leads. Maximum values at +23 C C 0.1 µf 0.1µF < C 1.0 µf C > 1.0 µf 1 khz 0.05% 0.05% 0.10% 10 khz 0.10% 100 khz 0.25% Measured at +23 C, 100 VDC 60 s for U R < 500 VDC and at 500 VDC for U R 500 VDC Between terminals: C 0.33 µf: MΩ C > 0.33 µf: s Between terminals and case: MΩ. p d std I max I b 5.0 ± ± ± ± ± ± ± ± ± ± ± ± ± ±
2 TYPICAL DATA C/C% C/C% C Capacitance vs. temperature (at 1 khz) khz Capacitance vs. frequency (at +23 C) MΩ µf tanδ % C Insulation resistance vs. temperature C Dissipation factor vs. temperature (at 1 khz) tanδ % Z (Ω) khz Dissipation factor vs. frequency (at +23 C) Resonance frequencies PHE 426 Lead spacing 5 mm 100 MHz Z (Ω) pf µf 0.01 µf 1000 pf MHz Resonance frequencies PHE 426 Lead spacing 7.5 to 37.5 mm 208
3 DERATING OF U RMS VS FREQUENCY, +85 C AMBIENT TEMPERATURE AND 10 C INTERNAL HEATING, TYPICAL VALUES Urms (V) 250 VDC/160VAC U rms (V) 300 VDC/160 VAC U rms (V) 400 VDC/220 VAC µf 0.33 µf µf 0.1 µf 0.68 µf µf µf µf 4.7 µf µf 4.7 µf 0.22 µf 0.82 µf Frequency (khz) Frequency (khz) Frequency (khz) 2.5 µf U rms (V) 630 VDC/250 VAC U rms (V) 1000 VDC/250 VAC µf µf 0.27 µf More simulation possibilities in PCCAD software package. See page µf Frequency (khz) Frequency (khz) ENVIRONMENTAL TEST DATA Damp heat test Test conditions: T = +40 C, RH = 93%, t = 56 days. Test criteria: C/C ±1%, tanδ (1kHz), I R after test 0.5 x I R min. Endurance test Test conditions: T = +85 C, U = 1.25 x U R, t = 2000 h. Test criteria: C/C ±1%, tanδ (10 khz), for C R 1 µf tanδ (1 khz), for C R > 1 µf I R after test 0.5 x I R min. Capacitance drift Max. 1.5% after a 2 year storage period at a temperature of C and a relative humidity of %. ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. MARKING RIFA Article code Rated capacitance according to IEC Capacitance tolerance code Rated voltage Manufacturing code (year, month) PACKING The box dimensions for bulk packaging are 245 x 145 x 80 mm. Quantity/package as in article table, based on standard lead length. Reels with taped capacitors are packed 10 in a box with the dimensions 370 x 370 x 560 mm. Quantity per reel as in article table. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 209
4 100 VDC/63 VAC LEAD SPACING 5 MM PHE426DJ4100JR PHE426DJ4120JR PHE426DJ4150JR PHE426DJ4180JR PHE426DJ4220JR PHE426DJ4270JR PHE426DJ4330JR PHE426DJ4390JR PHE426DJ4470JR PHE426DJ4560JR PHE426DJ4680JR PHE426DJ4820JR PHE426DJ5100JR PHE426DJ5120JR PHE426DJ5150JR PHE426DJ5180JR PHE426DJ5220JR PHE426DJ5270JR PHE426DJ5330JR PHE426DJ5390JR PHE426DJ5470JR PHE426DJ5560JR PHE426DJ5680JR PHE426DJ5820JR PHE426DJ6100JR PHE426DJ6120JR PHE426DJ6150JR VDC/160 VAC LEAD SPACING 5 MM PHE426HJ4100JR PHE426HJ4120JR PHE426HJ4150JR PHE426HJ4180JR PHE426HJ4220JR PHE426HJ4270JR PHE426HJ4330JR PHE426HJ4390JR PHE426HJ4470JR PHE426HJ4560JR PHE426HJ4680JR PHE426HJ4820JR PHE426HJ5100JR PHE426HJ5120JR PHE426HJ5150JR PHE426HJ5180JR PHE426HJ5220JR PHE426HJ5270JR PHE426HJ5330JR PHE426HJ5390JR PHE426HJ5470JR PHE426HJ5560JR PHE426HJ5680JR PHE426HJ5820JR PHE426HJ6100JR PHE426HJ6120JR PHE426HJ6150JR05 210
5 250 VDC/160 VAC LEAD SPACING 7.5 MM PHE426HK4100JR PHE426HK4120JR PHE426HK4150JR PHE426HK4180JR PHE426HK4220JR PHE426HK4270JR PHE426HK4330JR PHE426HK4390JR PHE426HK4470JR PHE426HK4560JR PHE426HK4680JR PHE426HK4820JR PHE426HK5100JR PHE426HK5120JR PHE426HK5150JR PHE426HK5180JR PHE426HK5220JR PHE426HK5270JR PHE426HK5330JR PHE426HK5390JR PHE426HK5470JR PHE426HK5560JR PHE426HK5680JR PHE426HK5820JR PHE426HK6100JR PHE426HK6120JR PHE426HK6150JR05 LEAD SPACING 10 MM PHE426HA5680JR PHE426HA5820JR PHE426HA6100JR PHE426HA6120JR PHE426HA6150JR PHE426HA6180JR PHE426HA6220JR05 LEAD SPACING 15 MM PHE426HB6180JR PHE426HB6220JR PHE426HB6270JR PHE426HB6330JR PHE426HB6390JR PHE426HB6470JR PHE426HB6560JR PHE426HB6680JR PHE426HB6820JR PHE426HB7100JR06 LEAD SPACING 22.5 MM PHE426HD6680JR06L PHE426HD6820JR06L PHE426HD7100JR06L PHE426HD7120JR06L PHE426HD7150JR06L PHE426HD7180JR06L PHE426HD7220JR06L PHE426HD7270JR06L PHE426HD7330JR06L PHE426HD7390JR06L PHE426HD7470JR06L2 211
6 250 VDC/160 VAC LEAD SPACING 27.5 MM PHE426HF7220JR06L PHE426HF7270JR06L PHE426HF7330JR06L PHE426HF7390JR06L PHE426HF7470JR06L PHE426HF7560JR06L PHE426HF7680JR06L PHE426HF7820JR06L PHE426HF8100JR06L2 LEAD SPACING 37.5 MM PHE426HR7470JR06L PHE426HR7560JR06L PHE426HR7680JR06L PHE426HR7820JR06L PHE426HR8100JR06L PHE426HR8120JR06L PHE426HR8150JR06L PHE426HR8180JR06L PHE426HR8200JR06L2 300 VDC/160 VAC LEAD SPACING 10 MM PHE426JA5330JR PHE426JA5390JR PHE426JA5470JR PHE426JA5560JR PHE426JA5680JR PHE426JA5820JR PHE426JA6100JR PHE426JA6120JR PHE426JA6150JR05 LEAD SPACING 15 MM PHE426JB6100JR PHE426JB6120JR PHE426JB6150JR PHE426JB6180JR PHE426JB6220JR PHE426JB6270JR PHE426JB6330JR PHE426JB6390JR PHE426JB6470JR PHE426JB6560JR PHE426JB6680JR06 LEAD SPACING 22.5 MM PHE426JD6330JR06L PHE426JD6390JR06L PHE426JD6470JR06L PHE426JD6560JR06L PHE426JD6680JR06L PHE426JD6820JR06L PHE426JD7100JR06L PHE426JD7120JR06L PHE426JD7150JR06L PHE426JD7180JR06L2 212
7 300 VDC/160 VAC LEAD SPACING 22.5 MM PHE426JD7220JR06L PHE426JD7270JR06L2 LEAD SPACING 27.5 MM PHE426JF7100JR06L PHE426JF7120JR06L PHE426JF7150JR06L PHE426JF7180JR06L PHE426JF7220JR06L PHE426JF7270JR06L PHE426JF7330JR06L PHE426JF7390JR06L PHE426JF7470JR06L PHE426JF7560JR06L PHE426JF7680JR06L2 LEAD SPACING 37.5 MM PHE426JR7330JR06L PHE426JR7390JR06L PHE426JR7470JR06L PHE426JR7560JR06L PHE426JR7680JR06L PHE426JR7820JR06L PHE426JR8100JR06L PHE426JR8120JR06L2 400 VDC/220 VAC LEAD SPACING 5 MM PHE426KJ4100JR PHE426KJ4120JR PHE426KJ4150JR PHE426KJ4180JR PHE426KJ4220JR PHE426KJ4270JR PHE426KJ4330JR PHE426KJ4390JR PHE426KJ4470JR PHE426KJ4560JR PHE426KJ4680JR PHE426KJ4820JR PHE426KJ5100JR PHE426KJ5120JR PHE426KJ5150JR PHE426KJ5180JR PHE426KJ5220JR PHE426KJ5270JR PHE426KJ5330JR PHE426KJ5390JR PHE426KJ5470JR PHE426KJ5560JR PHE426KJ5680JR05 LEAD SPACING 7.5 MM PHE426KK4100JR PHE426KK4120JR PHE426KK4150JR PHE426KK4180JR05 213
8 400 VDC/220 VAC LEAD SPACING 7.5 MM PHE426KK4220JR PHE426KK4270JR PHE426KK4330JR PHE426KK4390JR PHE426KK4470JR PHE426KK4560JR PHE426KK4680JR PHE426KK4820JR PHE426KK5100JR PHE426KK5120JR PHE426KK5150JR PHE426KK5180JR PHE426KK5220JR PHE426KK5270JR PHE426KK5330JR PHE426KK5390JR PHE426KK5470JR PHE426KK5560JR PHE426KK5680JR05 LEAD SPACING 10 MM PHE426KA5220JR PHE426KA5270JR PHE426KA5330JR PHE426KA5390JR PHE426KA5470JR PHE426KA5560JR PHE426KA5680JR PHE426KA5820JR05 LEAD SPACING 15 MM PHE426KB5680JR PHE426KB5820JR PHE426KB6100JR PHE426KB6120JR PHE426KB6150JR PHE426KB6180JR PHE426KB6220JR PHE426KB6270JR PHE426KB6330JR PHE426KB6390JR PHE426KB6470JR06 LEAD SPACING 22.5 MM PHE426KD6180JR06L PHE426KD6220JR06L PHE426KD6270JR06L PHE426KD6330JR06L PHE426KD6390JR06L PHE426KD6470JR06L PHE426KD6560JR06L PHE426KD6680JR06L PHE426KD6820JR06L PHE426KD7100JR06L PHE426KD7120JR06L PHE426KD7150JR06L PHE426KD7180JR06L2 214
9 400 VDC/220 VAC LEAD SPACING 27.5 MM PHE426KF6560JR06L PHE426KF6680JR06L PHE426KF6820JR06L PHE426KF7100JR06L PHE426KF7120JR06L PHE426KF7150JR06L PHE426KF7180JR06L PHE426KF7220JR06L PHE426KF7270JR06L PHE426KF7330JR06L2 LEAD SPACING 37.5 MM PHE426KR7150JR06L PHE426KR7180JR06L PHE426KR7220JR06L PHE426KR7270JR06L PHE426KR7330JR06L PHE426KR7390JR06L PHE426KR7470JR06L PHE426KR7560JR06L PHE426KR7680JR06L2 630 VDC/250 VAC LEAD SPACING 5 MM PHE426MJ4100JR PHE426MJ4120JR PHE426MJ4150JR PHE426MJ4180JR PHE426MJ4220JR PHE426MJ4270JR PHE426MJ4330JR PHE426MJ4390JR PHE426MJ4470JR PHE426MJ4560JR PHE426MJ4680JR PHE426MJ4820JR PHE426MJ5100JR PHE426MJ5120JR PHE426MJ5150JR PHE426MJ5180JR PHE426MJ5220JR PHE426MJ5270JR PHE426MJ5330JR PHE426MJ5390JR PHE426MJ5470JR05 LEAD SPACING 7.5 MM PHE426MK4100JR PHE426MK4120JR PHE426MK4150JR PHE426MK4180JR PHE426MK4220JR PHE426MK4270JR PHE426MK4330JR PHE426MK4390JR PHE426MK4470JR PHE426MK4560JR PHE426MK4680JR05 215
10 630 VDC/250 VAC LEAD SPACING 7.5 MM PHE426MK4820JR PHE426MK5100JR PHE426MK5120JR PHE426MK5150JR PHE426MK5180JR PHE426MK5220JR PHE426MK5270JR PHE426MK5330JR05 LEAD SPACING 10 MM PHE426MA5100JR PHE426MA5120JR PHE426MA5150JR PHE426MA5180JR PHE426MA5220JR PHE426MA5270JR PHE426MA5330JR PHE426MA5390JR PHE426MA5470JR05 LEAD SPACING 15 MM PHE426MB5330JR PHE426MB5390JR PHE426MB5470JR PHE426MB5560JR PHE426MB5680JR PHE426MB5820JR PHE426MB6100JR PHE426MB6120JR PHE426MB6150JR PHE426MB6180JR PHE426MB6220JR06 LEAD SPACING 22.5 MM PHE426MD6100JR06L PHE426MD6120JR06L PHE426MD6150JR06L PHE426MD6180JR06L PHE426MD6220JR06L PHE426MD6270JR06L PHE426MD6330JR06L PHE426MD6390JR06L PHE426MD6470JR06L PHE426MD6560JR06L PHE426MD6680JR06L PHE426MD6820JR06L2 LEAD SPACING 27.5 MM PHE426MF6330JR06L PHE426MF6390JR06L PHE426MF6470JR06L PHE426MF6560JR06L PHE426MF6680JR06L PHE426MF6820JR06L PHE426MF7100JR06L PHE426MF7120JR06L PHE426MF7150JR06L PHE426MF7180JR06L2 216
11 630 VDC/250 VAC LEAD SPACING 37.5 MM PHE426MR6820JR06L PHE426MR7100JR06L PHE426MR7120JR06L PHE426MR7150JR06L PHE426MR7180JR06L PHE426MR7220JR06L PHE426MR7270JR06L PHE426MR7330JR06L PHE426MR7390JR06L VDC/250 VAC LEAD SPACING 10 MM PHE426PA4330JR PHE426PA4470JR PHE426PA4560JR PHE426PA4680JR PHE426PA4820JR PHE426PA5100JR PHE426PA5120JR PHE426PA5150JR05 LEAD SPACING 15 MM PHE426PB5100JR PHE426PB5120JR PHE426PB5150JR PHE426PB5180JR PHE426PB5220JR PHE426PB5270JR PHE426PB5330JR PHE426PB5390JR PHE426PB5470JR PHE426PB5560JR PHE426PB5680JR PHE426PB5820JR PHE426PB6100JR06 LEAD SPACING 22.5 MM PHE426PD5330JR06L PHE426PD5390JR06L PHE426PD5470JR06L PHE426PD5560JR06L PHE426PD5680JR06L PHE426PD5820JR06L PHE426PD6100JR06L PHE426PD6120JR06L PHE426PD6150JR06L PHE426PD6180JR06L PHE426PD6220JR06L PHE426PD6270JR06L2 LEAD SPACING 27.5 MM PHE426PF6100JR06L PHE426PF6120JR06L PHE426PF6150JR06L PHE426PF6180JR06L PHE426PF6220JR06L2 217
12 1000 VDC/250 VAC LEAD SPACING 27.5 MM PHE426PF6270JR06L PHE426PF6330JR06L PHE426PF6390JR06L PHE426PF6470JR06L PHE426PF6560JR06L PHE426PF6680JR06L2 LEAD SPACING 37.5 MM PHE426PR6330JR06L PHE426PR6390JR06L PHE426PR6470JR06L PHE426PR6560JR06L PHE426PR6680JR06L PHE426PR6820JR06L PHE426PR7100JR06L PHE426PR7120JR06L PHE426PR7150JR06L2 218
According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
PPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
Applications F 611 J F 104 M 050 C. First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F611 & F612 Series Metallized Polyester Film, 5 37.5 mm Lead Spacing, 50 1,000 VDC Overview The F611 and F612 Series is constructed of metallized winded
Applications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R75 Series is constructed of metallized
Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
Energy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
MSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
Metallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
Applications SMR K 50 J01 L4 BULK. Capacitance Tolerance H = ±2.5% J = ±5% K = ±10% M = ±20% F 211 J F 104 K 050 C
Metallized Polyphenylene Sulfide, Stable +150 C High Temperature Capacitor Overview The SMR Series is a metallized polyphenylene sulfide film capacitor with vacuum-evaporated aluminum electrodes. Radial
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, mm Lead Spacing, VDC
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, 5.0 27.5 mm Lead Spacing, 50 400 VDC Overview The SMR Series is a metallized polyphenylene sulfide
Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Failure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
Ceramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
MHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
MAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
THZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
Applications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
PSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
MKT (Box) PCX MKP (Box) PCMP 389. MMKP (Box) PCMP 384. MMKP (Dipped) PCMP 483. MKP (Dipped) PCMP 489. MKT (Dipped) PCMT 362 PFC Input 30
Film Capacitor Style Type Application Page Polyester Film Capacitors EMI Suppression Film Capacitors Series Impedance Capacitors Polypropylene Film Capacitors PFC Input Capacitors Polyester Polypropylene
Common to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
Applications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V
SPC Series Encapsulated Double Metallized, Size 2824 6560, 100 630 VDC Overview Film capacitor for surface mounting. Double sided metallized film as electrode. Plain polyphenylene sulfide (PPS) as dielectric.
Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
Environmental Policy
Quality Policy KEMET exceeds customer expectations through operational excellence and continuous improvement. Zero Defects 100% On-Time Delivery Technology Leader Lowest Total Cost of Ownership Six Sigma
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
Crimped taping. W NOTE: Straight lead not recommended Explanation of Part Number for Odd Size Taping
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Metallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
High Security Capacitors with controllable metallized frame layers
Replacement for CKM 501-4 BG series Applications Railway Signal Systems High Reliability Circuits Main Characteristics High Reliability Controllable Metallized frame layers Compliant to standards NF F
Temperature= +40±2 C Capacitance change ±3%
MS - (Expanded range; new lugs) MKP - Switching - igh current - DC-ink - AC Main applications DC-ink, switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
Medium Power Film Capacitors
The FLA series uses metallized polypropylene dielectric, aluminum can, impregnated with soft PU specially treated to have a very high dielectric strength in operating conditions up to 85 C. The FLA has
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
CAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise
CAPACITOR CATALOG SPE GROUP Capacitor & Diode ISO Professional Manufacturer To Support the success of enterprise To Support a successful enterprise SUNTAP ELECTRONICS GROUP CO.,LTD. Tel: +86 020 84122024
WR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
MMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
WR04X ±1%, ±5% General purpose chip resistors Size 0402
WR04X ±1%, ±5% General purpose chip resistors Size 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR04X Version 14 Jul.-2007 FEATURE 1. Small size and light weight 2. High reliability
APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
Snubber, High Current DC, and Switching Capacitors
GTC 005 2011 Snubber, High Current DC, and Switching Capacitors Genteq Capacitors 1946 West Cook Road, Fort Wayne, Indiana 46818 USA Phone: (260) 416-5400 Fax: (260) 416-5460 Email: capacitors@regalbeloit.com
General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, VDC, High Current. Applications
General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, 50 630 VDC, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting.
Applications GPC K 63 K31 TR12. Capacitance Tolerance K = ±10% M = ±20% Other tolerances on request F 117 S G 471 K 063 V
General Purpose, High Stability and AC Line EMI Suppression GPC Series Encapsulated Double Metallized, Size 2824 6560, 63 1,000 VDC Overview Film capacitor for surface mounting. Double sided metallized
Applications R47 5 I M
R47 Series, Class X2, 520 VAC, 85ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHB ±0.1% Ver.13 Sep.-2008 FEATURE 1.
Thank you for visiting our new Consumer/Gaming Capacitance Solution page.
Thank you for visiting our new Consumer/Gaming Capacitance Solution page. This site is currently under construction - in the interim you will find the following KEMET product data sheets that may be of
Metallized Polypropylene Film Capacitor (Plastic Case) AC Application (2 or 4 pins)
The series is a polypropylene metallized film capacitor with plastic casing sealed with epoxy. This capacitor is suitable for use in AC filter circuits, Solar Inverter and Industrial Inverter. FEATURES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
Metal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
FEEDTHROUGH CAPACITORS AND FILTERS FOR DEFENCE, PROFESSIONAL AND TELECOMMS APPLICATIONS
FEEDTHROUGH CAPACITORS AND FILTERS FEEDTHROUGH CAPACITORS AND FILTERS FOR DEFENCE, PROFESSIONAL AND TELECOMMS APPLICATIONS CONTENTS ALL RANGES RoHS COMPLIANT AC Feedthrough Capacitors Class Y2 250VAC Page
WK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805
WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WT04X Ver.13 Sep.-2008 FEATURE 1. Small size and light weight 2. Reduced
UL9 SERIES. Medium Power Film. DC Link Filter Capacitor
DC Link Filter Capacitor UL9 SERIES Medium Power Film The UL9 is a metallized polypropylene film capacitor designed to handle the heavy load of power applications, typical in DC Link applications. The
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
WR02X ±5%, ±1% General purpose chip resistors Size 0201
WR02X ±5%, ±1% General purpose chip resistors Size 0201 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR02X Version 03 Jul.-2004 FEATURE 1. Small size and light weight 2. High reliability
MKT (Box) PCMT 468. MKP (Box) PCMP 389. High Pulse High Current Metallized KP/MMKP (Dipped) BUP. MPPS (Dipped) PCMS 395
Film Capacitor Style Type Application Page PCMT 365/366/367 17 General Purpose capacitor Metallized Polyester MKT (Dipped) PCMT 368 Blocking Coupling 18 PCMT 369 Bypass Energy reservoir 19 MKT (Box) PCMT
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
WA04T ±5%, ±1% Concave Type General purpose chip resistors array
WA04T ±5%, ±1% Concave Type General purpose chip resistors array Size 0402x4 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WA04T_Concave_V10 Oct.2010 FEATURE 1. Small
Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
EMC- Components. Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology. Data Book Supplement
EMC- Components Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology Data Book Supplement Vakatseite (( 2 )) Feed- Through Capacitors Feed- Through Filters B85121 B85321 1 General
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
varistor plus catalog
varistor plus catalog Single Layer Varistor Technology Surface Mount & Leaded Products SEI electronics inc. P.O.Box 58789 Raleigh,NC 27658-8789 Tel. 1-888-sei-sei-sei Fax. 919-850-9504 www.seielect.com
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001