Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
|
|
- Alisha Robbins
- 5 years ago
- Views:
Transcription
1 WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing Particularly reliable contactconfigurations: 4-lead versions and screwable plate connections Internal series connection from 400 AC ery low dissipation factor Negative capacitance change versus temperature According to RoHS 00/9/EC Typical Applications For high pulse and high frequency applications requiring extremely reliable contacts e.g. IGBT-applications Construction ielectric: Polypropylene (PP) film Capacitor electrodes: ouble-sided metallized plastic film Internal construction: Snubber MKP: 180 AC, 0 AC Snubber MKP: 400 AC to 700 AC Plastic film Electrode carrier plastic film metallized on both sides Metal contact layer (schoopage) Terminating plate Plastic film Electrode carrier plastic film metallized on both sides Plastic film metallized on one side Metal contact layer (schoopage) Terminating plate Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94-0 Terminations: Tinned wire or plates. Marking: Colour: Red. Marking: Black. Epoxy resin seal: Red Electrical ata Capacitance range: mf to mf Rated voltages: 0 C, 400 C, 630 C, 1000 C, 1600 C, 000 C, 3000 C Capacitance tolerances: ±0%, ±10%, ±% (other tolerances are available subject to special enquiry) Operating temperature range: ) C to +100) C Climatic test category: /100/6 in accordance with IEC Insulation resistance at +0+ C: C T 0.33 mf: 1 x 10 M (mean value: x 10 M ) C 0.33 mf: sec (M x mf) (mean value: sec) Measuring voltage: 100 /1 min. Test voltage: L P 41.: 1.6 U r, sec L 41.: 1.4 U r, sec L 6 : 1. U r, sec issipation factors at + 0) C: tan d at f C 0.1 mf 0.1 mf < C T 1.0 mf C > 1.0 mf 1 k 3 x x x k 4 x x k 1 x 10-4 Maximum pulse rise time: Capacitance mf Mounting Recommendation max. pulse rise time /msec at T A < 40) C 0 C 400 C 630 C 1000 C 1600 C 000 C 3000 C for pulses equal to the rated voltage Excessive mechanical strain, e.g. pressure or shock onto the capacitor body, is to be avoided during mounting and usage of the capacitors. When fixing the plates the screw torque is to be limited to max. Nm. oltage derating: A voltage derating factor of 1.3 % per K must be applied from +8+ C for C voltages and from +7+ C for AC voltages Reliability: Operational life hours Failure rate 1 fit (0. x U r and 40) C) Specific dissipation: Box size* Specific dissipation in Watts per K W x H x L in mm above the ambient temperature 19 x 31 x x 34 x x 37. x x 48 x x 4 x * other box sizes see page 1. Packing Transportation-safe packing in cardboard boxes. For further details and graphs please refer to Technical Information. 78
2 WIMA Snubber MKP Continuation General ata Capac- 0 C/180 AC* 400 C/0 AC* 630 C/400 AC* 1000 C/600 AC* 1600 C/60 AC* 000 C/700 AC* 3000 C/700 AC* itance W H L W H L W H L W H L W H L W H L W H L mf mf mf mf * AC voltage: f T 1000 ; 1.4 x U rms + UC T U r New values On ordering please state the required version and box size. ersions and dimensional drawings see page 8. ims. in mm. Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide) µf 10 µf 0 µf µf 0. µf.0 µf 0 C Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Rights reserved to amend design data without prior notification. 8.0 µf 1 µf C.0 µf 0. µf 1. µf f µf 6.0 µf 8.0 µf C.0 µf µf 0. µf 1. µf µf 1 µf 0. µf 6.0 µf 10 µf.0 µf 400 C f C.0 µf.0 µf 0. µf µf f C 3000 C µf 0. µf.0 µf f f f
3 ersions of WIMA Snubberand C-LINK MKP 4 Capacitors 8
4 ersions of WIMA Snubber and C-LINK MKP 4 Capacitors 83
5 ersions of WIMA Snubberand C-LINK MKP 4 Capacitors ims. in mm. Additional special versions can be realized. Please contact us with your specific needs. 84
6 ersions of WIMA Snubber and C-LINK MKP 4 Capacitors Possible connecting respective plate versions - depending on box size. * on request 8
WIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.
More informationMetallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More information100 khz 4 x x MHz 10 x Mechanical Tests
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 4 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing, Internal Series Connection for Increased Current Carrying Capability PCM
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current
More informationWIMA MKP 4. Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm Special Features High volume/capacitance ratio Self-healing Very low dissipation factor Negative capacitance change versus temperature
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Mechanical Tests.
WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse duty construction According to RoHS 2011/65/EU Typical Applications For general C-applications
More informationWIMA MP 3-Y2. Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm. Typical Applications. Construction. Packing.
WIMA MP 3-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm Special Features Particularly high reliability against active and passive flammability Excellent self-healing as well as high
More informationCountry Authority Specification. Germany VDE IEC USA/Canada UL UL CAN/CSA-E Mechanical Tests
WIMA MP 3-Y2 / 3R-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 in PCM 10 mm to 27.5 mm. Capacitances from 1000 pf to 0.1 mf. Rated Voltages 250 VAC and 300 VAC. Special Features Particularly high reliability
More information300 VAC* W H L PCM** Part number 1000 pf MKY22W11003D MKY22W11503D MKY22W12203D00
WIMA MKP-Y2 Metallized Polypropylene (PP) RFI-Capacitors Class Y2 in PCM 10 mm to 37.5 mm. Capacitances from 1000 pf to 1.0 mf. Rated Voltage 300 VAC. Special Features Reliable self-healing High degree
More informationWIMA FKP 2. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationWIMA FKP 02. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 02 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 2.5 mm. Capacitances from 100 pf to 0.01 mf. Rated Voltages from 63 VC to 400 VC. Special Features Pulse duty construction
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More information0.01 mf MKX2AW21002C MKX2AW21003F MKX2AW21502C MKX2AW21503F00
WIMA MKP-X2 Metallized Polypropylene (PP) RFI-Capacitors Class X2 in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltage 305 VAC. Special Features Reliable self-healing High degree
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA FKS 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKS 2 Polyester (PET) Film/Foil Capacitors for Pulse Applications in PCM 5 mm. Capacitances from 1000 pf to 0.047 mf. Rated Voltages from 63 VC to 630 VC. Special Features Pulse duty construction
More informationWIMA FKP 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKP 2 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM mm. Capacitances from 33 pf to 0.033 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty construction
More informationMSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
More informationEnergy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
More informationRated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
More information1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationPPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
More informationFailure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
More informationWIMA DC-LINK MKP 4. Metallized Polypropylene (PP) - Capacitors for DC-Link Applications. Typical Applications. Construction.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications Special Features Capacitances up to 150 mf High volume/capacitance ratio Excellent self-healing properties Very low dissipation
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
More informationWIMA FKM 2. Film and Foil Capacitors with Mixed Dielectric for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKM 2 Film an Foil Capacitors with Mixe ielectric for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Constant capacitance value versus temperature (similar to the obsolete
More informationPHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
More informationPSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
More informationAccording to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
More informationMTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
More informationCapacitance. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU Typical Applications For general C-applications e.g.
More informationCMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
More informationMetallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
More informationWIMA FKP 3. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 7.5 mm to 15 mm. Capacitances from 100 pf to 0.22 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty
More informationEMI Suppression Capacitors
Construction Plastic case (UL 94 V-0) Epoxy resin sealing, flame-retardant Axial leads, insulating sleeve (type B8119 Self-healing Smallest possible dimensions Terminals Parallel wire leads, tinned Two
More informationMAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
More informationPolyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VDC to 630 VDC.
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VC to 630 VC. Special Features High volume/capacitance ratio Self-healing AEC-Q200
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 16 VDC 50 VDC 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationMHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
More informationTHZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
More informationWIMA MKP-X2. Continuation. General Data
WIMA MKP-X2 Metallize Polypropylene (PP) RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm Special Features Reliable self-healing igh egree of interference suppression ue to goo attenuation an low ESR Accoring
More information50 VDC 10 V 63 VDC 50 V. 1 x 10 4 M (mean value: 2 x 10 4 M ) Measuring time: 1 min. Test voltage: 1.6 U r, 2 sec. Maximum pulse rise time:
WIMA MKS 02 Metallize Polyester (PET) Capacitors in PCM 2.5 mm Special Features igh volume/capacitance ratio an reuce base PCM 2.5 mm Self-healing Accoring to RoS 2002/95/EC Typical Applications For general
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 100 VDC 250 VDC 400 VDC 630 VDC 850 VDC 1000 VDC 1600 VDC 2000 VDC
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltages from 100 VC to 2000 VC. Special Features High volume/capacitance ratio Self-healing
More information1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
More informationWIMA FKS 3. Polyester (PET) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKS 3 Polyester (PET) Film an Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Packing.
WIMA FKS 2 Polyester (PET) Film an Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationR82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
More informationTemperature= +40±2 C Capacitance change ±3%
MS - (Expanded range; new lugs) MKP - Switching - igh current - DC-ink - AC Main applications DC-ink, switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters
More informationKEMET Part Number: C276CC35250AA1J
KEMET Part Number: C276CC35250AA1J Film, Film/Foil Polypropylene, Motor Run, C276, 25 uf, 5%, 470 V D Threaded Mounting Stud M8 x 10 Double Fast-On L 2 13.5±0.5 5.5 6.3 x 0.8 13.4±0.5 10±0.5 General Information
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationMetallized Polypropylene (PP) - Capacitors for DC-Link Applications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VDC to 1300 VDC.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VC to 1300 VC. Special Features Capacitances up to 400 mf
More informationWIMA MKS 4. Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm Special Features Electrical ata High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications
More informationMedium Power Film Capacitors
The FLA series uses metallized polypropylene dielectric, aluminum can, impregnated with soft PU specially treated to have a very high dielectric strength in operating conditions up to 85 C. The FLA has
More informationCommon to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
More informationCAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise
CAPACITOR CATALOG SPE GROUP Capacitor & Diode ISO Professional Manufacturer To Support the success of enterprise To Support a successful enterprise SUNTAP ELECTRONICS GROUP CO.,LTD. Tel: +86 020 84122024
More informationLife Expectancy : Class A Class B Class C Class D 30,000hrs 10,000hrs 3,000hrs 1000hrs
4.4 Motor Run Capacitors : continuous operation ypical Applications : Motor Run Capacitor ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection
More informationHigh Security Capacitors with controllable metallized frame layers
Replacement for CKM 501-4 BG series Applications Railway Signal Systems High Reliability Circuits Main Characteristics High Reliability Controllable Metallized frame layers Compliant to standards NF F
More information100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
More informationCountry Authority Specification Symbol. Mounting Recommendation
WIMA MP 3-X2 Metallize Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features Particularly high reliability against active an passive flammability Excellent self-healing as well as high
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
More informationDrawing : STHVF series. Screw Nut. Capacitor Marking. HK Film Capacitor Ltd
2.1 High Voltage Filter Capacitors : STHVF : with screw Nut at Capacitor both Ens STHVF-A : with Copper Lea at Capacitor both Ens ( Axial Lea ) Applications : - By-pass DC / AC Filtering, Transient an
More informationSnubber, High Current DC, and Switching Capacitors
GTC 005 2011 Snubber, High Current DC, and Switching Capacitors Genteq Capacitors 1946 West Cook Road, Fort Wayne, Indiana 46818 USA Phone: (260) 416-5400 Fax: (260) 416-5460 Email: capacitors@regalbeloit.com
More informationMetallized Polypropylene Film Capacitor (Plastic Case) AC Application (2 or 4 pins)
The series is a polypropylene metallized film capacitor with plastic casing sealed with epoxy. This capacitor is suitable for use in AC filter circuits, Solar Inverter and Industrial Inverter. FEATURES
More informationPolypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
More informationPhiCap Capacitors for Power Factor Correction
PhiCap Capacitors for Power Factor Correction Product Profile 2000 http://www.epcos.com PhiCap AC Capacitors for Power Factor Correction General The PhiCap series, is a well approved and reliable EPCOS
More informationMKT (Box) PCX MKP (Box) PCMP 389. MMKP (Box) PCMP 384. MMKP (Dipped) PCMP 483. MKP (Dipped) PCMP 489. MKT (Dipped) PCMT 362 PFC Input 30
Film Capacitor Style Type Application Page Polyester Film Capacitors EMI Suppression Film Capacitors Series Impedance Capacitors Polypropylene Film Capacitors PFC Input Capacitors Polyester Polypropylene
More informationMKT (Box) PCMT 468. MKP (Box) PCMP 389. High Pulse High Current Metallized KP/MMKP (Dipped) BUP. MPPS (Dipped) PCMS 395
Film Capacitor Style Type Application Page PCMT 365/366/367 17 General Purpose capacitor Metallized Polyester MKT (Dipped) PCMT 368 Blocking Coupling 18 PCMT 369 Bypass Energy reservoir 19 MKT (Box) PCMT
More informationResin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationPOWER CAPACITORS. Cylindrical capacitor standard duty
Construction Dielectric: Polypropylene film Non PCB, Soft Polyurethane resin Extruded round aluminium can with stud Provided with discharge resistors Overpressure disconnector Features Three phase, delta
More informationMPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationPolypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
More informationFilm capacitors - AC capacitors Motor run capacitors
Film capacitors - AC capacitors Motor run capacitors Series/Type: B32328 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline
More informationConfiguration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
More informationEMC- Components. Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology. Data Book Supplement
EMC- Components Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology Data Book Supplement Vakatseite (( 2 )) Feed- Through Capacitors Feed- Through Filters B85121 B85321 1 General
More informationWIMA MKS 4. Typical Applications. Construction. Mechanical Tests. Packing. High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU
WIMA MKS 4 Metallized Polyester (PET) Capacitors in PCM 7.5 mm to 52.5 mm. Capacitances from 1000 pf to 680 mf. Rated Voltages from 50 VC to 2000 VC. Special Features Electrical ata High volume/capacitance
More informationPlastic Film Capacitors
Film Capacitor for AC Motor Type : PMF Series Features High safety (safety function installed) High reliability, safety standard approval Small size, lightness, and low loss RoHS directive compliant Recommended
More informationApplications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
More informationCAPACITORS FOR POWER ELECTRONICS
Table of contents page 1. Introduction 2 2. Applications & Definitions 3 3. Capacitor Construction 5 4. Safety 5 5. Operating life 6 6. Mounting and operating instructions 7 7. Calculation example 8 8.
More informationPilkor components. Dielectric Style Type Application Page
Film Capacitor Style Type Application Page General Purpose capacitors Polyester PCMT 365/366/367 17 Blocking MKT (Dipped) Coupling PCMT 369 18 Bypass Energy reservoir MKT (Box) PCMT 468 19 PCX2 339 (MINI)
More informationProduct Data Sheets. C.27/4 Series C.27/6 Series C.27/7 Series
Product Data Sheets C.27/4 Series C.27/6 Series C.27/7 Series 11 C.27/4 TYPICAL APPLICATIONS: the capacitor is used in series to the start-winding of the singlephase electric motor, allowing its starting
More informationUL Recognised Wirewound Resistors
UL1412 recognised fusible resistor * Failsafe mains fusing at 12 / 24Vrms Inrush and surge withstanding UL94-V flameproof coating SMD leadform option available RoHS compliant * UL file number E23449. Electrical
More informationGeneral Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
More informationFilm capacitors AC capacitors
Film capacitors AC capacitors Series/Type: The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments
More informationWW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
More informationApplications C87 8 B F AA 4 J
C87, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview C87 is a polypropylene metallized film, with a cylindrical aluminium can-type construction filled with resin. It uses faston,
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More information250 V; class B; 85 C / 400 V; class B; 85 C / 480 V; class C; 85 C
250 V; class B; 85 C / 400 V; class B; 85 C / 480 V; class C; 85 C Series/Type: Ordering code: Date: January 2008 Version: 2.0 Content of inside pages of data sheet. Data will be automatically entered
More informationfilm capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
More informationCAPACITORS FOR POWER ELECTRONICS
CAPACITORS FOR POWER ELECTRONICS Positive Development in Power Electronics INDEX Page No: 0. CONTENTS 1 1. INTRODUCTION 2 2. APPLICATION 2 3. DEFINITIONS 3 4. CAPACITOR CONSTRUCTION 5 5. CAPACITOR SAFETY
More information