AC and Pulse Polypropylene Film Capacitors MKP Radial Epoxy Lacquered Type
|
|
- Quentin McDaniel
- 6 years ago
- Views:
Transcription
1 A and Pulse Polypropylene Film apacitors MKP Radial Epoxy Lacquered Type seating plane (1) P APPLIATIONS Low losses due to low contact resistance and low loss dielectric result in applications where high currents at high frequency occur or high stability is preferred. Their small dimensions make them suitable for circuits with high packaging density. MARKING Manufacturer s emblem; -value; tolerance; rated voltage; manufacturer s type designation; code for dielectric material DIELETRI Polypropylene film ELETRODES Metallized OATING Flame retardant epoxy material (UL-class 94 V-0) Tinned wire l α (2) A h lt w Ødt l F' (3) F Dimensions in mm Hole Ø 1.0 for d t = 0.6 mm Hole Ø 1.3 for d t = 0.8 mm 0 α < 50 F - F < 0.3 mm F = 7.5 mm mm / mm A = 2.0 mm mm / mm (pitch = 10.0 mm) A = 2.5 mm mm / mm (pitch = 15.0 mm; 22.5 mm and 27.5 mm) double conical hole 1.6 > 0.5 A Dimensions in mm l P A h lt 10 w 15 Ødt h' H w β β ϒ ϒ magnified view direction A β 15 Ødt FEATURES 7.5 mm bent back pitch 10 mm to 27.5 mm lead pitch Low contact resistance Low loss dielectric Supplied loose in box (including lock lead versions) and taped on reel Material categorization: for definitions of compliance please see ONSTRUTION Wound mono construction APAITANE RANGE (E24 SERIES) 0.01 μf to 3.9 μf APAITANE TOLERANE ± 5 % RATED (D) VOLTAGE 160 V; 250 V; 400 V; 630 V RATED (A) VOLTAGE 100 V; 160 V; 200 V RATED PEAK-TO-PEAK VOLTAGE 280 V; 450 V; 560 V LIMATI ATEGORY 55/105/56 RATED TEMPERATURE 85 MAXIMUM APPLIATION TEMPERATURE 105 REFERENE SPEIFIATIONS IE PERFORMANE GRADE Grade 1 (long life) STABILITY GRADE Grade 2 DETAIL SPEIFIATION For more detailed data and test requirements contact: dc-film@vishay.com Revision: 23-Nov-15 1 Document Number: 28123
2 OMPOSITION OF ATALOG NUMBER TYPE AND PITHES 15.0 mm / 7.5 mm 10.0 mm mm 22.5 mm 27.5 mm APAITANE (numerically; but not for lock lead) MULTIPLIER (nf) Example: 104 = 10 x 10 = BF2 479 XX XX X 2222 (*) 479 XX XX X (*) old ordering number TYPE PAKAGING LEAD ONFIGURATION Loose in box Taped on reel (bent back) Loose in box Taped on reel Lead length 5.0 mm ± 1.0 mm PREFERRED TYPES -TOL. 160 V 250 V 400 V 630 V Lock lead 4.0 mm mm / mm H = 16.0 mm, P 0 = 15.0 mm; reel diameter = 500 mm (1) ± 5 % Dimensions of this code numbers stay between brackets ON REQUEST Lead length 3.5 mm mm / mm (pitch 10 mm and 15 mm) Lead length 3.5 mm ± 0.5 mm (pitch 22.5 mm and 27.5 mm) ± 5 % H = 16.0 mm, P 0 = 12.7 mm; reel diameter = 500 mm Notes (1) Small reel diameter = 356 mm is available on request For detailed tape specifications refer to packaging information Revision: 23-Nov-15 2 Document Number: 28123
3 SPEIFI REFERENE DATA (160 V D ) DESRIPTION VALUE Tangent of loss angle: at 10 khz at 100 khz = μf 10 x x μf < 0.11 μf 10 x x μf < 0.18 μf 10 x x μf < 0.3 μf 10 x x μf < 0.47 μf 10 x x μf < 0.82 μf 15 x x μf < 1.1 μf 15 x x μf < 1.2 μf 15 x x μf < 1.3 μf 15 x x μf < 1.8 μf 15 x x μf < 2.4 μf 15 x x μf < 3.0 μf 15 x x μf < 3.3 μf 15 x x μf < 3.6 μf 15 x x μf < 3.9 μf 15 x x 10-4 Rated voltage pulse slope (du/dt) R at 160 V D : P = 10 mm P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for 1.0 μf at 100 V; 1 min R between leads, for > 1 μf at 100 V; 1 min R between leads and case; 100 V; 1 min Ionization (A) voltage (typical value) at 50 p peak discharge Withstanding (D) voltage (cut off current 10 ma); rise time 100 V/s (1) Withstanding (D) voltage between leads and case Note (1) See Voltage Proof Test for Metalized Film apacitors : U RD = 160 V; U RA = 100 V; U p-p = 280 V (standard); -tol. = ± 5 % w max. x h (h ) max. x l max. 60 V/μs 50 V/μs 25 V/μs 15 V/μs > M > s > M > 220 V 256 V; 1 min 2840 V; 1 min ATALOG NUMBER BF AND PAKAGING REEL ALL ORIGINAL PITH PITH 7.5 mm (BENT BAK) l t = 5.0 mm ± 1.0 mm SPQ SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm Pitch = 7.5 mm (bent back) Pitch = 10.0 mm x 15.0 x x 15.5 x Revision: 23-Nov-15 3 Document Number: 28123
4 w max. x h (h ) max. x l max. ATALOG NUMBER BF AND PAKAGING REEL l t = 5.0 mm ± 1.0 mm ALL Pitch = 15.0 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 15.0 mm x 15.0 (16.5) x x 15.5 (17.0) x PITH 7.5 mm (BENT BAK) ORIGINAL PITH SPQ SPQ SPQ x 16.0 (17.5) x x 16.5 (18.0) x x 17.0 (18.5) x x 17.5 (19.0) x x 18.0 (19.5) x x 18.5 (20.0) x Pitch = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 22.5 mm x 20.0 x x 20.5 x x 21.0 x x 21.5 x x 22.5 x x 23.0 x Pitch = 27.5 mm ± 0.4 mm; d t = 0.80 ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 27.5 mm x 23.0 x x 23.5 x x 24.0 x x 24.5 x x 25.0 x x 26.0 x x 26.5 x x 27.0 x Revision: 23-Nov-15 4 Document Number: 28123
5 U RD = 160 V; U RA = 100 V; U p-p = 280 V (lock lead); -tol. = ± 5 % w max. x h max. x l max. Pitch = 10.0 mm ± 1.0 mm; d t = 0.60 mm ± 0.06 mm ATALOG NUMBER BF AND PAKAGING l t = 4.0 mm mm / mm SPQ x 18.0 x x 18.5 x Pitch = 15.0 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 18.0 x x 18.5 x x 19.0 x x 19.5 x x 20.0 x x 20.5 x x 21.0 x x 21.5 x Pitch = 22.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 23.0 x x 23.5 x x 24.0 x x 24.5 x x 25.5 x x 26.0 x Pitch = 27.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 26.0 x x 26.5 x x 27.0 x x 27.5 x x 28.0 x x 29.0 x x 29.5 x x 30.0 x Revision: 23-Nov-15 5 Document Number: 28123
6 SPEIFI REFERENE DATA (250 V D ) DESRIPTION VALUE Tangent of loss angle: at 10 khz at 100 khz μf μf 10 x x μf < 0.11 μf 10 x x μf < 0.18 μf 10 x x μf < 0.30 μf 10 x x μf < 0.47 μf 10 x x μf < 0.82 μf 15 x x μf < 1.1 μf 15 x x μf < 1.2 μf 15 x x μf < 1.3 μf 15 x x μf < 1.8 μf 15 x x μf < 2.4 μf 15 x x μf < 3.0 μf 15 x x 10-4 Rated voltage pulse slope (du/dt) R : P = 10.0 mm P = 15.0 mm P = 22.5 mm P = 27.5 mm R between leads, for 1.0 μf at 100 V; 1 min R between leads, for > 1 μf at 100 V; 1 min R between leads and case; 100 V; 1 min Ionization (A) voltage (typical value) at 50 p peak discharge Withstanding (D) voltage (cut off current 10 ma); rise time 100 V/s (1) Withstanding (D) voltage between leads and case Note (1) See Voltage Proof Test for Metalized Film apacitors : U RD = 250 V; U RA = 160 V; U p-p = 450 V (standard); -tol. = ± 5 % w max. x h (h ) max. x l max. 70 V/μs 60 V/μs 30 V/μs 20 V/μs > M > s > M > 220 V 400 V; 1 min 2840 V; 1 min ATALOG NUMBER BF AND PAKAGING REEL ALL ORIGINAL PITH PITH 7.5 mm (BENT BAK) l t = 5.0 mm ± 1.0 mm SPQ SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm Pitch = 7.5 mm (bent back) Pitch = 10.0 mm x 15.0 x x 15.5 x Revision: 23-Nov-15 6 Document Number: 28123
7 w max. x h (h ) max. x l max. ATALOG NUMBER BF AND PAKAGING REEL l t = 5.0 mm ± 1.0 mm ALL Pitch = 15.0 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 15.0 mm PITH 7.5 mm (BENT BAK) ORIGINAL PITH SPQ SPQ SPQ x 15.5 (17.0) x x 16.0 (17.5) x x 16.5 (18.0) x x 17.0 (18.5) x x 17.5 (19.0) x x 18.0 (19.5) x x 18.5 (20.0) x Pitch = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 22.5 mm x 20.0 x x 20.5 x x 21.0 x x 21.5 x x 22.0 x x 22.5 x x 23.0 x x 23.5 x Pitch = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 27.5 mm x 23.0 x x 23.5 x x 24.0 x x 24.5 x x 25.0 x x 26.0 x x 26.5 x x 27.0 x x 28.0 x Revision: 23-Nov-15 7 Document Number: 28123
8 U Rdc = 250 V; U Rac = 160 V; U p-p = 450 V (lock lead); -tol. = ± 5 % w max. x h max. x l max. Pitch = 10.0 mm ± 1.0 mm; d t = 0.60 ± 0.06 mm ATALOG NUMBER BF AND PAKAGING l t = 4.0 mm mm / mm SPQ x 18.0 x x 18.5 x Pitch = 15.0 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 18.5 x x 19.0 x x 19.5 x x 20.0 x x 20.5 x x 21.0 x x 21.5 x Pitch = 22.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 23.0 x x 23.5 x x 24.0 x x 24.5 x x 25.0 x x 25.5 x x 26.0 x x 26.5 x Pitch = 27.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 26.0 x x 26.5 x x 27.0 x x 27.5 x x 28.5 x x 29.0 x x 29.5 x x 30.0 x x 31.0 x Revision: 23-Nov-15 8 Document Number: 28123
9 SPEIFI REFERENE DATA (400 V D ) DESRIPTION VALUE Tangent of loss angle: at 10 khz at 100 khz x x < x x μf < 0.11 μf 10 x x μf < 0.18 μf 10 x x μf < 0.3 μf 10 x x μf < 0.47 μf 10 x x μf < 0.82 μf 15 x x μf < 1.1 μf 15 x x μf < 1.2 μf 15 x x 10-4 Rated voltage pulse slope (du/dt) R at 400 V D : P = 10.0 mm P = 15.0 mm P = 22.5 mm P = 27.5 mm R between leads, for 1.0 μf at 100 V; 1 min R between leads, for > 1.0 μf at 100 V; 1 min R between leads and case; 100 V; 1 min Ionization (A) voltage (typical value) at 50 p peak discharge Withstanding (D) voltage (cut off current 10 ma); rise time 100 V/s (1) Withstanding (D) voltage between leads and case Note (1) See Voltage Proof Test for Metalized Film apacitors : 80 V/μs 70 V/μs 35 V/μs 25 V/μs > M > s > M > 220 V 640 V; 1 min 2840 V; 1 min U RD = 400 V; U RA = 200 V; U p-p = 560 V (standard); -tol. = ± 5 % w max. x h (h ) max. x l max. ATALOG NUMBER BF AND PAKAGING REEL l t = 5.0 mm ± 1.0 mm ALL PITH 7.5 mm (BENT BAK) ORIGINAL PITH SPQ SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm Pitch = 7.5 mm (bent back) Pitch = 10.0 mm x 15.0 x Revision: 23-Nov-15 9 Document Number: 28123
10 w max. x h (h ) max. x l max. ATALOG NUMBER BF AND PAKAGING REEL l t = 5.0 mm ± 1.0 mm ALL PITH 7.5 mm (BENT BAK) ORIGINAL PITH SPQ SPQ SPQ Pitch = 15.0 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 15.0 mm x 15.5 (17.0) x x 16.0 (17.5) x x 16.5 (18.0) x x 17.0 (18.5) x x 17.5 (19.0) x x 18.0 (19.5) x Pitch = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 22.5 mm x 19.5 x x 20.0 x x 20.5 x x 21.0 x x 21.5 x x 22.0 x x 22.5 x x 23.0 x x 23.5 x Pitch = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 27.5 mm x 23.0 x x 23.5 x x 24.0 x x 24.5 x x 25.0 x x 25.5 x x 26.0 x Revision: 23-Nov Document Number: 28123
11 U RD = 400 V; U RA = 200 V; U p-p = 560 V (lock lead); -tol. = ± 5 % ATALOG NUMBER BF AND PAKAGING w max. x h max. x l max. l t = 4.0 mm mm / mm SPQ Pitch = 10.0 mm ± 1.0 mm; d t = 0.60 mm ± 0.06 mm x 18.0 x x 18.0 x Pitch = 15.0 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 18.5 x x 19.0 x x 19.5 x x 20.0 x x 20.5 x x 21.0 x Pitch = 22.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 22.5 x x 23.0 x x 23.5 x x 24.0 x x 24.5 x x 25.0 x x 25.5 x x 26.0 x x 26.5 x Pitch = 27.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 26.0 x x 26.5 x x 27.0 x x 27.5 x x 28.0 x x 28.5 x x 29.0 x Revision: 23-Nov Document Number: 28123
12 SPEIFI REFERENE DATA (630 V D ) DESRIPTION VALUE Tangent of loss angle: at 10 khz at 100 khz 0.01 μf < μf 10 x x μf < μf 10 x x μf < 0.11 μf 10 x x μf < 0.18 μf 10 x x μf < 0.3 μf 10 x x μf < 0.47 μf 10 x x μf < 0.68 μf 15 x x 10-4 Rated voltage pulse slope (du/dt) R at 630 V D : P = 10.0 mm 100 V/μs P = 15.0 mm 90 V/μs P = 22.5 mm 45 V/μs P = 27.5 mm 30 V/μs R between leads, for 1.0 μf at 500 V; 1 min > M R between leads and case; 500 V; 1 min > M Ionization (A) voltage (typical value) at 50 p peak discharge > 220 V Withstanding (D) voltage (cut off current 10 ma); rise time 100 V/s (1) 1008 V; 1 min Withstanding (D) voltage between leads and case 2840 V; 1 min Note (1) See Voltage Proof Test for Metalized Film apacitors : U RD = 630 V; U RA = 200 V; U p-p = 560 V (standard); -tol. = ± 5 % w max. x h (h ) max. x l max. ATALOG NUMBER BF AND PAKAGING REEL ALL ORIGINAL PITH l t = 5.0 mm ± 1.0 mm PITH 7.5 mm (BENT BAK) SPQ SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm Pitch = 7.5 mm (bent back) Pitch = 10.0 mm x 15.0 x x 15.5 x Pitch = 15.0 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 15.0 mm x 15.5 (17.0) x x 16.0 (17.5) x x 16.5 (18.0) x x 17.0 (18.5) x x 17.5 (19.0) x x 18.0 (19.5) x x 18.5 (20.0) x Revision: 23-Nov Document Number: 28123
13 w max. x h (h ) max. x l max. ATALOG NUMBER BF AND PAKAGING REEL l t = 5.0 mm ± 1.0 mm ALL PITH 7.5 mm (BENT BAK) ORIGINAL PITH SPQ SPQ SPQ Pitch = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 10.0 mm x 19.5 x x 20.0 x x 20.5 x x 21.0 x x 21.5 x x 22.0 x x 22.5 x x 23.0 x Pitch = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 10.0 mm x 22.5 x x 22.5 x x 23.0 x x 23.0 x x 24.5 x x 25.0 x x 26.0 x x 26.5 x x 27.0 x U RD = 630 V; U RA = 200 V; U p-p = 560 V (lock lead); -tol. = ± 5 % w max. x h max. x l max. Pitch = 10.0 mm ± 1.0 mm; d t = 0.60 mm ± 0.06 mm ATALOG NUMBER BF AND PAKAGING l t = 4.0 mm mm / mm SPQ x 18.0 x x 18.5 x Revision: 23-Nov Document Number: 28123
14 w max. x h max. x l max. Pitch = 15.0 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm ATALOG NUMBER BF AND PAKAGING l t = 4.0 mm mm / mm SPQ x 18.5 x x 19.0 x x 19.5 x x 20.0 x x 20.5 x x 21.0 x x 21.5 x Pitch = 22.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 22.5 x x 23.0 x x 23.5 x x 24.0 x x 24.5 x x 25.0 x x 25.5 x x 26.0 x Pitch = 27.5 mm ± 1.0 mm; d t = 0.80 mm ± 0.08 mm x 25.5 x x 25.5 x x 26.0 x x 26.0 x x 27.5 x x 28.0 x x 29.0 x x 29.5 x x 30.0 x Revision: 23-Nov Document Number: 28123
15 MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNTION OF FREQUENY A voltage (V) 220 nf 470 nf 1000 nf 2200 nf 220 nf 470 nf 1000 nf 2200 nf 3900 nf T amb 85, 160 V D 3900 nf f (Hz) 10 6 A voltage (V) 47 nf 220 nf 470 nf 1000 nf 2200 nf T amb 85, 250 V D f (Hz) 10 6 A voltage (V) A voltage (V) 85 < T amb 105, 160 V D f (Hz) 10 6 A voltage (V) 2200 nf 47 nf 220 nf 470 nf 1000 nf 85 < T amb 105, 250 V D f (Hz) 10 6 A voltage (V) 22 nf 47 nf 220 nf 470 nf 1000 nf 22 nf 47 nf 220 nf 470 nf 1000 nf T amb 85, 400 V D f (Hz) < T amb 105, 400 V D f (Hz) 10 6 Revision: 23-Nov Document Number: 28123
16 A voltage (V) A voltage (V) 10 nf 22 nf 47 nf 220 nf 470 nf 10 nf 22 nf 47 nf 220 nf 470 nf T amb 85, 630 V D f (Hz) < T amb 105, 630 V D f (Hz) 10 7 APAITANE IMPEDANE Δ/ 2(%) 4 typical Impedance (Ω) max nf µf 1.0 µf min T amb ( ) f (Hz) 10 8 Revision: 23-Nov Document Number: 28123
17 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUT, PRODUT SPEIFIATIONS AND DATA ARE SUBJET TO HANGE WITHOUT NOTIE TO IMPROVE RELIABILITY, FUNTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners VISHAY INTERTEHNOLOGY, IN. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000
MKT 368 Vishay BCcomponents
Metallized Polyester Film apacitors MKT 368 Vishay Bcomponents 168x12(halfpage) l w FEATURES Available taped on reel and loose in box seating plane (1) α h Lead (Pb)-free product RoHS-compliant product
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
MKT 373 168x12(halfpage) l w h FEATURES Available taped and loose in box Lead (Pb)-free product RoHS-compliant product APAITANE TOLERANE ± 10 %; ± 5 % e3 RoHS OMPLIANT P lt Ødt RATED (D) VOLTAGE V; 250
More informationNTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads
NTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2.06K to 10K Ω Tolerance on R 25 -value ± 1.92; ± 2.19 % B 25/85 -value 3511
More informationAluminum Capacitors Standard - 85 C Snap-In
Aluminum Capacitors Standard - 85 C Snap-In FEATURES Useful life: 2000 h at +85 C Polarized aluminum electrolytic capacitors Small dimension High C x U product Material categorization: for definitions
More informationNTC Thermistors, Mini Epoxy PVC Insulated Leads
NTC Thermistors, Mini Epoxy PVC Insulated Leads FEATURES High adhesive strength between the PVC wire and the encapsulating lacquer Accurate down to ± 0.3 C Small body of max. 3 mm for easy installation
More informationAluminum Capacitors Standard C Snap-In
Aluminum Capacitors Standard - 105 C Snap-In FEATURES Useful life: 2000 h at +105 C Polarized aluminum electrolytic capacitors Small dimensions High C x U product Material categorization: for definitions
More informationHigh Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC
High Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC FEATURES Available Class 1 and class 2 ceramic High insulation resistance Epoxy encapsulated Wide capacitance range Ceramic
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More informationAluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In FEATURES Useful life: 2000 h at 105 C Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized
More informationØ 5 mm Film Dielectric Trimmers
Ø 5 mm Film Dielectric Trimmers FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round head Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationWet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to +125 C, Elastomer-Sealed
Wet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to, Elastomer-Sealed FEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available
More informationHigh Power, High Current EDG Mica Grid Resistors, Grid Mill Bank Design
High Power, High Current EDG Mica Grid Resistors, Grid Mill Bank Design FEATURES assembly 8 kw at 40 C Superior watt density for higher powers in same space EDG technology support system improved for lighter
More informationNTC Thermistors, 2-Point Radial Leaded, Automotive Grade
NTC Thermistors, 2-Point Radial Leaded, Automotive Grade FEATURES High accuracy over a wide temperature range High stability over a long life Exceptional thermal shock withstanding performance AEC-Q200
More informationFilm Dielectric Trimmers
Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 8 mm x 9 mm x 10 mm For a basic grid of 2.54 mm Versions available with 1 or 2 rotor contacts Top and bottom adjustment Mounting:
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationAluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE
More informationHigh Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 50 A Suitable for insert assembly systems Material categorization: For definitions of
More informationAluminum Electrolytic Capacitors Radial Very Low Impedance
Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25
More informationAluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic
More informationFilm Dielectric Trimmers
Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 11 mm x 14 mm x 9 mm For a basic grid of 2.54 mm Top adjustment Mounting: radial Material categorization: for definitions of
More informationSurface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123
Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C, unless otherwise specified FEATURES Space-level reliability
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 158 PUL-SI 090 miniaturized 85 C PUL-SI Fig. 1 156 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 22 x 25
More informationAluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More informationPower Panel 6 W Potentiometer
Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material
More informationNTC Thermistors, Flex Foil Sensors
NTC Thermistors, Flex Foil Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K, 47K Tolerance on R 25 -value ± 3 % B 25/85 -value 3960 K Tolerance on B 25/85 -value ± 1 % Operating
More informationAluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
More informationCeramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2, and Class 3, 1 kv DC, 2 kv DC, 3 kv DC, 6 kv DC
Ceramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2, and Class 3, 1 kv DC, 2 kv DC, 3 kv DC, 6 kv DC EATURES High capacitance with small size High stability Crimp and straight lead
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
More informationAutomotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 C W LIMITING ELEMENT VOLTAGE
More informationSolid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/09 Qualified, Style CSR21
Solid-Electrolyte TANTALEX Capacitors, ilitary IL-PRF-39003/09 Qualified, Style CSR21 FEATURES Hermetically sealed etal cased Axial lead Weibull failure rates B, C, Exponential failure rates, P, R, S Low
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module n/a Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others
More informationPower Panel 6 W Potentiometer
Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material
More informationSolid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL
Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above 85 C voltage derating
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Tubular FETURES High temperature vitreous coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability
More informationWirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560
Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available
More informationWirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF)
REF, RSF Wirewound Resistors, Industrial Power, Tubular, Ribwound (R), Fixed (REF, RSF) FETURES High temperature silicone or vitreous enamel coatings Excellent for pulsing applications ll welded construction
More informationFilm Dielectric Trimmers
TEST VOLTAGE (DC) FOR 1 MINUTE: 5 V MAXIMUM CONTACT RESISTANCE: 5 mω MINIMUM INSULATION RESISTANCE: 1 MΩ FEATURES High temperature type Housing dimensions: 1 mm x 11 mm x 11 mm For a basic grid of 2.54
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical
More informationSMD 0805, NTC Thermistors AgPd Terminations
NTCS0805E4.../2381 615 1... SMD 0805, NTC Thermistors AgPd REMARK Non preferred type (replaced by NTCS0805E3...T/2381 615 5...) QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2K to
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Edgewound Tubular STNR ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W FETURES High temperature vitreous coating omplete welded construction
More informationT95 D 107 K 010 E A A S TYPE CASE CODE DC VOLTAGE RATING AT + 85 C TERMINATION AND PACKAGING
T95 Solid Tantalum Chip Capacitors, FEATURES High reliability; Weibull grading available Surge current testing per MIL-PRF-55365 options available Standard and low ESR options Terminations: SnPb, standard.
More informationNTC Thermistors, Radial Leaded and Coated
N hermistors, Radial Leaded and oated QUIK REFERENE DAA PARAEER VALUE UNI Resistance value at 25 30 to 1 olerance on R 25 -value (point matched) ± 1, ± 5, ± 10 % emperature accuracy (curve tracking) ±
More informationNTC Thermistors, Radial Leaded and Coated
N hermistors, Radial Leaded and oated QUIK REFERENE DAA PARAEER VALUE UNI Resistance value at 25 30 to 1 Ω olerance on R 25 -value (point matched) ± 1, ± 5, ± 10 % emperature accuracy (curve tracking)
More informationAluminum Capacitors, Power General Purpose Screw Terminals
Aluminum Capacitors, Power General Purpose Screw erminals FEAURES Useful life: 5000 h at +85 C Efficient design Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
More informationSolid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/01 Qualified, Style CSR13
olid-electrolyte TANTALEX apacitors, ilitary IL-F-39003/01 Qualified, tyle 13 FEATUE Hermetically sealed etal cased Axial lead Weibull failure rates,,, Exponential failure rates,,, Tape and reel available
More informationPolyester Capacitors Filmite E, ORANGE DROP, Radial Lead
Polyester Capacitors Filmite E, ORANGE DROP, Radial ead PERFORMANCE CHARACTERITIC Operating Temperature: - 55 C to + 85 C To + 105 C when working voltage is reduced to 70 % of + 85 C rating; to + 125 C
More informationAluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
More informationAluminum Electrolytic Capacitors, Power High Ripple for Traction, Screw Terminals
Aluminum Electrolytic Capacitors, Power igh Ripple for raction, Screw erminals FEAURES ong useful life: > 10 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm ow ESR Polarized aluminum electrolytic
More informationWet Tantalum Capacitors Cylindrical Body, Hermetically Sealed
Wet Tantalum Capacitors Cylindrical Body, ermetically Sealed PERFORMANCE CARACTERISTICS Operating Temperature: to +175 C with proper derating Voltage Range: 8 V C to 630 V C at 85 C Reverse Voltage: none
More informationAluminum Capacitors +85 C, Large Can
Aluminum Capacitors +85 C, arge Can FEATURES Useful life: 2000 h at +85 C The industry standard for large can aluminum capacitors Ideal for high wattage power supplies and energy storage applications Capacitance
More informationAluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
More informationAluminum Capacitors + 85 C, Powerlytic Electrolytics
Aluminum Capacitors + 85 C, Powerlytic Electrolytics QUICK REFERENCE DATA + 75 %, - 10 % DESCRIPTION VALUE Operating temperature - 20 C to + 85 C Tolerance on C R : 3 WV DC to 75 WV DC 100 WV DC to 450
More informationLower Voltage Ceramic Disc Capacitors 2 kvdc to 7.5 kvdc
Lower Voltage eramic isc apacitors 2 kv to 7.5 kv Fig. 1 FEAURES max. 1.250" min. (32 mm) inned opper Leads LO Low losses High capacitance in small sizes High stability Radial leads 0.125" (3.2 mm) max.
More informationSMD 0402, Glass Protected NTC Thermistors
2381 615 4.../NTCS0402E3...T SMD 0402, Glass Protected QUICK REFERENCE DATA PARAMETER Resistance value at 25 C VALUE 4.7 kω to 100 kω Tolerance on R 25 - value ± 1 %; ± 2 %; ± 3 %; ± 5 % B 25/85 value
More informationResin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometers
, /" 7 mm Conductive Plastic and Cermet FEATURES Robust construction High rotational life cycles Up to three sections PC support plates Rotary switches and solder lugs terminals available Compliant to
More informationSolid Tantalum Chip Capacitors TANTAMOUNT Conformal Coated, Maximum CV, Low ESR
TANTAMOUNT Conformal Coated, FEATURES Large capacitance rating range Lowest for a surface mount tantalum chip capacitor % surge current conditioning for C, D and R cases Terminations: Tin (2) standard
More informationNTC Thermistors, Molded Range
2381 641 6... N Thermistors, Molded Range FEATURES Excellent for surface temperature measurement Designed for harsh environments Based on the 2322 640 0... naked thermistor chips. Old part number was 2322
More informationSolid Tantalum Surface Mount Capacitors TANTAMOUNT Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TR3 FEATURES Terminations: 100 % Matte Tin, standard Tin/lead available Molded case available in six case codes Compatible with High Volume automatic pick and place
More informationTransient Voltage Suppressor
Features 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical IR less then 1μA above 10V RoHS
More informationSolid Tantalum Chip Capacitors TANTAMOUNT, Commercial, Surface Mount
Solid Tantalum Chip Capacitors PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 0.10 µf to
More informationAluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
More informationØ 7.5 mm Film Dielectric Trimmers
TEST VOLTAGE (DC) FO 1 MINUTE: 5 V MAXIMUM CONTACT ESISTANCE: 1 mω MINIMUM INSULATION ESISTANCE: 1 MΩ CATEGOY TEMPEATUE ANGE: PP - 4 to + 7 C PE, PC, PTFE, PET - 4 to + 85 C CLIMATIC CATEGOY (IEC 668):
More information1N4728A to 1N4764A. Zener Diodes. Vishay Semiconductors
Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating. Standard Zener voltage tolerance is ± 5 %. Applications Voltage stabilization
More informationTrimmable Thick Film Flat Chip Resistors
Trimmable Thick Film Flat Chip Resistors FEATURES Designed for state of the art laser trimming Enables economical functional circuit adjustment Low TCR available Excellent stability ± 0.25 % (1000 h rated
More informationFEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
More informationAluminum Capacitors Radial Style
FEATURES Polarized Aluminum electrolytic capacitor High C x U product Small dimensions Compliant to RoHS directive 2002/95/EC Component outlines. Obsolete - please refer to: www.vishay.com/doc?25014 APPLICATIONS
More informationThin Film Chip Fuses
Thin Film Chip Fuses FEATURES Advanced thin film technology Very quick acting fuse characteristics Outstanding stability of fusing characteristics Green product, supports lead (Pb)-free soldering Merial
More informationSelf Contained Weighing Module
Self Contained Weighing Module Model 9010 FEATURES Capacities 3-90kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions
More informationNMJ Series 5.2kVDC Isolated 1W DC-DC Converters
www.murata-ps.com NMJ Series FEATURES UL60950 recognised Wide temperature performance at full 1 watt load, 40 to 85 Single and dual outputs SIP package style 5.2kVD isolation Hi Pot Test 3V, 5V & 12V input
More informationTruckWeigh. PM Onboard. Selection Guide. Overload Monitoring System for Medium and High Capacity Trucks. A Brand of VPG On-Board Weighing
Selection Guide Overload Monitoring for Medium High Capacity Trucks PM Onboard A Br of VPG On-Board Weighing www.obwvpg.com DISCLAIMER: ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
More informationXTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed
XT-K-L-M-V Wet Tantalum Capacitors FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life SCC rawings 04032 & 04033 PERFORMANCE
More informationfilm capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
More informationK3020P/ K3020PG Series
Optocoupler, Phototriac Output, 400 V V DRM K3020P/ K3020PG Series Features Isolation materials according to UL 94-VO Pollution degree 2 (DIN/VDE 0110 resp. IEC 60664) Climatic classification 55/100/21
More informationAluminum Capacitors + 85 C, Powerlytic Electrolytics
FEATURES Designed for applications requiring greatest possible capacitance in small physical case sizes QUICK REFERENCE DATA DESCRIPTION VALUE Operating temperature - 20 C to + 85 C Tolerance on C R :
More informationMACP TB. 23 db Coupler MHz Rev. V1. Features. Functional Schematic. Description. Pin Configuration 4. Ordering Information 1,2
23 Coupler Features 23 Coupling Ratio Surface Mount Package Available on Tape and Reel Excellent Temperature Stability RoHS Compliant and Pb Free 260 C Reflow Compatible Description The MACP-0145 is a
More informationATN3580 Series: Fixed Attenuator Pads
DATA SHEET ATN3580 Series: Fixed Attenuator Pads Applications Attenuators Features Specified flat response to 40 GHz Return loss > 15 db Available at 1-10, 12, 15, 20, 30, and 40 db Power handling to 1
More informationPTC Thermistors Motor Start Packages
PTC Thermistors Motor Start Packages QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 15 to 75 Tolerance on resistance value ± 30 % Maximum current ratings 6 to 36 A RMS Switching temperature
More informationMarket Solutions. High-Speed Weighing Celtron Sensortronics Revere Tedea-Huntleigh Brands of VPG Transducers.
Market Solutions High-Speed Weighing Celtron Sensortronics Revere Tedea-Huntleigh Brands of www.vpgtransducers.com Build the VPG Advantage into Your High-Speed Weighing Applications Shorter settling time
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES YLINDRIAL V-HIP ONSTRUTION FOR SURFAE MOUNTING AVAILALE WITH ANTI-VIRATION WIDE TERMINATIONS VERY LOW IMPEDANE & HIGH RIPPLE URRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105 ) SUITALE
More information1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
More informationSRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationMetallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationType BPDS Polypropylene Board Mount DC Link Capacitors PCB Mount Power Film Capacitors
Specifications Capacitance Range Capacitance Tolerance 1μF - 200 μf ±5%(J) ±10%(K) Rated Voltage 450 Vdc - 1800 Vdc @ 85 C, 500 Vdc - 2000 Vdc @ 70 C Maximum Operating Temperature +105 C Upper Temperature
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationPolypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationBZX84C2V4ET1 Series. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
BZX84CV4ET Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage
More information