Indexing chucks Shaft chucks Column chucks
|
|
- Sylvia Bridges
- 5 years ago
- Views:
Transcription
1 Pull-down chucks ompensating chucks Indexing chucks Shaft chucks olumn chucks Page 100 Page 102 Page 10 Page 106 Page 108 TSF- TSR- Self centering Self centering Pull-down chucks Ø mm tongue & groove base jaws TSF- Self centering Pull-down chucks Ø mm tongue & groove base jaws TSF-RM Self centering Self centering Quick jaw change pull-down chucks Ø mm QUIK JA AE IT PALLETS TSF-P TSR-P ompensating ompensating ompensating pull-down chucks Ø mm FR- ompensating jaws TSR-RM TSF-P ompensating ompensating pull-down chucks Ø mm Page 116 Page 120 Page 126 Page 128 AX Automatic indexing chuck Automatic indexing chucks Ø mm hydraulic clamping and indexing divisions: x 90 / 8 x 5 / 3 x 120 / 6 x 60 or specials Shaft chuck with face driver Shaft turning chucks Ø mm floating or selfcentering jaws quick change for jaws and face driver retractable jaws via retractable jaw carrier complete machining of shafts in one operation SA Shaft chuck with face driver Shaft turning chucks Ø mm compensating jaws retractable by movement of master jaws complete machining of shafts in one set-up built-in power operated/spring loaded face driver AS Self centering column chucks Pull-down chucks Ø mm for external clamping AS-E for internal clamping AS-I 3 and 6 jaws (AS-E only) Page 112 Page ompensating jaw chucks Ø mm large compensating stroke fix or spring loaded center FRS ompensating jaws ompensating jaw chucks Ø mm large compensating stroke fix or spring loaded center TPT- 2+2 independent jaw movement, tongue & groove igh Precision power chucks Ø mm closed center with tongue & groove master jaws Page SM-AUTOBLOK 1
2 shaft-chuck n Face driver with centerpoint fix or spring loaded Shaft-chuck with face driver with fixed center ZVD-SZ or D double piston cylinder 2 1 Power operated face driver with a fixed center type SF (The design of the face driver is made according to the component) n The axial reference is the center bore of the component. n Fixed center guarantees highest concentricity. n The driving pins are actuated through piston o. 2 of the twin piston cylinder ZVD-SZ. The driving pins penetrate into the face of the component (Piston o. 1 is used for chuck actuation). n Axial compensation of the driving pins is done through a ball joint. n The fixed center of the face driver is radially adjusted by adjusting wedges. n lamped/unclamped position of the face driver is monitored by proximity switches/lps. n ighest accuracy - o adjustment necessary! Axial reference is the center bore Shaft-chuck with face driver with spring-loaded center SI-L long stroke cylinder Long stroke cylinder (only 1 piston) Axial reference is the face of the component Face driver with spring-loaded center type FSB (The design of the face driver is made according to the component) n The axial reference is the face of the component. n The component is pushed against the driving pins and the spring-loaded center by the tailstock thrust. The driving pins penetrate into the face of the component. Axial compensation of the driving pins is done by ball joints. n A special built-in locking mechanism holds the spring-loaded center and holds the component in its axial position. n The driving pins compensate axially by a ball joint. n The concentricity of the center point of the face driver is adjusted by adjusting wedges. n ighest accuracy - o adjustment necessary! 2 SM-AUTOBLOK
3 shaft-chuck Lubrication -shaft-chuck Fill with the oil, that comes with the chuck, in retracted chuck body postion and with the oil fill plug push rod mounted Refill oil oil fill plug hen filling in the oil, put jaw o. 3 at 9:00 o` clock position Oil-type: LP ISO V 68 From SM-Autoblok recommended oil: astrol Machine oil Magnaglide D68 chuck size oil volume ca. 250 ml ca. 500 ml ca ml oil level control plug Applications Shaft n oncentric dia. n Faces n Outlines n Slots n Outlines rankshaft n Bearing dia. n rank sides n rank o.d. n ranks n Reference slots amshaft n Bearing dia. n am faces n am profile n Slots SM-AUTOBLOK 3
4 shaft-chuck Main dimensions and technical details L b U R M P Z h X1 X2 a2 a1 d E D S F F1 A g O T B J U M+L R S Piston of -215 Subject to technical changes SM AUTOBLOK type Mounting huck outside dia. huck height huck height A B D E A06 A08 A ,35 139,73 196,88 133, 171, 235,0 Push rod face driver Push rod pos. Piston stroke for axial movement chuck body Piston stroke for jaw clamping clamp. / residual clamp. stroke / residual stroke at dimension h* max. jaw stroke at dimension h* in clamp. position max. speed max. draw pull max.gripforce h* Moment of inertia eight min./max. min./max. F1 J L M O P R S f6 T U V Z Z1 a1/a2 mm mm b c d g h X1 X2 r.p.m. k k kgm 2 kg M57 x 1 M73 x 1 96 x 1 M3 x 1,5 M33 x 1,5 M5 x 1,5 M12 M16 M / 0 121,5 / 106,5 10 / / - 76,5 / 6,5 90 / M12 M16 M20 15, ,5 16, ,5 / 1,5,5 / 1,3,5 / 1,3,0 / 1,3,5 / 1,3 5,7 / 1,3 5,3 5, R 92 R 115 R M12 x 20 M16 x 2 M20 x ,236 1, *The max. clamping force refers to chucks lubricated with K05 grease. At chucks with oil or oil+air lubrication the clamping force is reduced accordingly. **hen using higher top jaws, the actuating force must be reduced accordingly. For further jaws and accessories please ask for our 150 pages special catalogue! SM-AUTOBLOK
5 shaft-chuck Ordering review Supply range: huck with mounting bolts and mounting keys Adapter flanges Spindlemounting size A A A Spindlemounting size -215 Maß -260 Dimension -325 Dimension A A6 Standard A Standard A Standard A Accessories/rease SM AUTOBLOK Oil: LP ISO V 68 Oil LP ISO V ml 500 ml 1000 ml Double piston cylinder ZVD-SZ Id. o. 68/17-70/15 110/28-90/15 110/28-90/ page 169 SM-AUTOBLOK 5
Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationStationary chucks pneumatic/hydraulic
Stationary chucks pneumatic/hydraulic US-CL US-A With 2 jaws With long or long stroke chucks normal stroke chucks Stationary cylinder and chuck unit, hydraulic Ø 80-315 mm unit with static cylinder and
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More information3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks
3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks This catalogue describes the key components of a power chucking system featuring the following FORKARDT power chucks: QLC, QLK,
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationQuick jaw change power chucks
Quick jaw change power chucks Page 110 Page 120 Page 124 Page 124 Page 12 Page 18 proofline series fully sealed low maintenance Page 1 proofline series fully sealed low maintenance Page 142 KNCS N Quick
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationThe original quick jaw change power chuck. High repeatability when changing jaws
Fast changeover, fast payback: The original quick jaw change power chuck KNCS N Easy lubrication even on vertical machines with 3 radial builtin grease fittings Minimal setup times Jaw change in less than
More informationThe STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
More informationCNC ROTARY TABLE. Specification
CNC ROTARY TABLE Features: Pneumatic / Hydraulic Clamping Pre Loaded Axial Radial Roller Bearing Gear Mechanism - Motor to Worm Shaft Dual Lead Worm Gear set Vertical mounting Option available with Vertical/Horizontal
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABES RNE SERIES RBA SERIES TA SERIES 1 RA SERIES RTV SERIES
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABES RNE SERIES RA SERIES RBS SERIES RN-MUTI SERIES RBA
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LTHE HUKS INDEPENDENT HUKS 2015/2016 We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationHFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.
FH0 G B FH0 G A S F J H2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationDescription and operating instructions. TOUCHDEX indexing tables
TOUCHDEX Automatic mechanical indexing tables Description and operating instructions Pag.. 3 TOUCHDEX indexing tables Pag.. 8 COMBIDEX Pag.. 12 TILTING Pag.. 13 MULTIDEX Pag.. 14 Accessories Pag.. On our
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com SAMSUNG MCV 50 RNA-161R RNA-201R RNA-251R RNE-160R RNE-200R RNE-250R
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationPortal modules.
Portal modules www.comoso.com www.comoso.com Portal modules PORTAL MODULES Series Size Page Portal modules PMP 114 PMP 16 118 PMP 25 124 EPM 130 EPM 37 138 EPM 48 146 The SCHUNK program offers linear technology
More informationDOOSAN MACHINE TOOLS AMERICA
ROTARY TABE SEECTION GUIDE DOOSAN MACHINE TOOS AMERICA KOMAPRECISION.COM 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABE MODES
More informationLateral parallel hand Double acting. Operational stroke length: 20, 30, 40mm. 980m/s2
FH0 G G B H2 LB2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
More informationSLU SLUA BASIC LINE ECONOMIC CLAMPING. from the market leader in Steady Rests. Best Price - Top Quality
BASIC LINE from the market leader in Steady Rests ECONOMIC CLAMPING Best Price - Top Quality Steady Rest Steady Rest Application/customer benefits Series - Economic Clamping Best Price - Top Quality!
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)
RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABE SEECTION GUIDE KOMARECISION.COM 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABE MODES RE SERIES RA SERIES RBS SERIES
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationAGE-XY. Application example. Compensation XY Compensation Units Light Loads. Workpiece weight 4 kg.. 10 kg. Sizes 050..
AGE-XY Sizes 050.. 080 Workpiece weight 4 kg.. 10 kg Compensation paths XY ± 2.5 mm.. ± 4 mm Rotation ± 12.. ± 16 Application example Insertion unit for assembling a pin in a bore, in an approximately
More informationDOOSAN MACHINE TOOLS AMERICA
ROTARY TABE SEECTION GUIDE DOOSAN MACHINE TOOS AMERICA Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABE MODES RNE SERIES RA SERIES
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com HWACHEON ROTARY TABLE SELECTION GUIDE RNE-0R RNA-161R RG-R RN-100R-2
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationKNCS-N NEW. 2 JAWS Quick Jaw Change Chuck. PRECISE High repeatability when changing jaws High speed. FLEXIBLE Minimum set up times Flexibility
NEW 2 JAWS Quick Jaw Change Chuck PRECISE igh repeatability when changing jaws igh speed FEXIE Minimum set up times Flexibility Technical Data www.smw-autoblok.de/qr/kncs-n2 SMW-AUTOOK Spannsysteme Gmb
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationCylinders with integrated guide Series QCTF and QCBF
> Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationPOWER CHUCKS KTN / KTG / KS
POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer
More informationBB6000 Work Sheet. Tool head. assembly. (boring head. shown) Axial feed unit Tool carrier. Hydraulic motor
BB6000 Work Sheet Bearing support (three-arm end mount shown) Tool head (boring head shown) Boring bar/ leadscrew Torque arm Rotational drive unit Axial feed unit Tool carrier Bearing support (four-arm
More informationDesign principle / Technical features
Design principle / Technical features Components and construction groups IV 4 Stationary opening unit - Construction group IV. Non-rotating distributor. Non-rotating housing. Housing, axial movable Power
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)
LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.
More informationRotary Indexing Table with Face Gear
FIBROTAKT Rotary Indexing Table with Face Gear Product No. 1.001.00.00.00.01000 1 7975 006 4 08/007 Contents FIBRO The latest technology with a tradition of service /3 FIBROTAKT at a glance 4 Technical
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East indsor,
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationROTARY INDEX TABLES RT Series
ROTARY INDEX TABLES RT Series RT100 For mounted accessories up to Ø 800mm. For rapid assembly of small parts, inspection or feeding parts. 14 Fixed Index Drives The rotary index table transforms a constant
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABLE SELECTION GUIDE KOMA PRECISION, Inc. corporate
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationFlexible Couplings 44
Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact
More informationMagnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABE SEECTION GUIDE KOMAPRECISION.COM 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABES Kitamura s Mycenter Machining Centers
More informationDouble-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80
> Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationModular. Compact. Loadable. HLM Stroke Module
HLM Modular. Compact. Loadable. HLM Stroke Module Linear module with optimized overall length, pneumatic drive and scope-free pretensioned junction rollers. Field of Application For lifting of workpieces
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationPNCE ELECTRIC CYLINDER
ELECTRIC CYLINDER INDEX Characteristics 1 Structural design 2 How to order 3 Technical data 4 Dimensions 11 Accessories 12 Lubrication position 2 Motor adapter with coupling 2 Motor side drive with timing
More informationGWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
More informationPneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
More informationThe PReMIeRe of The year
The PReMIeRe of The year SRU-plus pneumatic universal rotary actuator SRU-plus Pneumatic universal rotary actuator SRU-plus one of the most powerful rotary actuator on the market. a consistent modular
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationPC-Series Precision Linear Actuators. Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators
PC-Series Precision Linear Actuators Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators Make the Change to Electric Enjoy superior performance and save time and energy
More informationSeparators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
More informationWorkholding for... High-volume machining
Workholding for... High-volume machining The Name To Know In Workholding Since 1916, LMC has been the name to know in workholding and it keeps getting better. Growing. Re-investing in engineering capabilities.
More informationVibration damping precision couplings
Vibration damping precision couplings In light of the advantages of elasticity, strength, resilience, and damping effects, elastomer materials are now being used in most areas of mechanical engineering.
More informationRotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing.
GMT Rotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing. The GMT Rotary Indexing Tables are fitted with
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More information