24V TO 13.5V FIXED OUTPUT VOLTAGE CONVERTER
|
|
- Shavonne Bailey
- 5 years ago
- Views:
Transcription
1 3092 PRODUCTION RELESE B 3257 DDED TOLERNCES V TO 13.5V FIXED OUTPUT VOLTGE CONVERTER PROPRIETRY THIS DRWING IS THE PROPERTY OF SURE POWER INC. and shall not be copied, reproduced, lent, or disposed of, nor used for any purpose other than that for which it is specifically provided without the written permission of SURE POWER INC. DRWINGS IN THIS DOCUMENT RE NOT TO SCLE DRWN ME PRJCT ENGR ENGR MNGR SLES/MRKTG PR00 24/13.5V CONVERTER W/MEM OUTPUT SPECIFICTION/OUTLINE 52152B B 1 6 W
2 OVERVIEW: The are switching type, 24V step-down converters designed to power 12V accessories on equipment with 24V electrical systems. They provide a nominal fixed output voltage of 13.5V and an output current of 15 below ambient temperatures of 85ºC and 25 at temperatures below 65ºC. The also provide a continuous non-switched voltage for memory support required by some radios. Main output power is controlled by an IGNITION input. Protection is provided against input reverse polarity, over voltage, under voltage, short circuit and over current conditions. In the event that the ground connection to the converter is broken, the output voltage and memory voltage drops below 13.5V for output loads greater than 0.2. Internal thermal protection forces a gradule reduction of available output current in order to keep converter temperatures to a safe level (see Fig. 1). FIG OUTPUT CURRENT vs. MBIENT TEMPERTURE* Output Current (mps) mbient Temp (deg. C) * Chamber: Tenney Environmental, model T10RC-1.5 The circuitry is encased in epoxy to provide sealing and protection against chemicals and corrosive materials, such as fuels and cleaners. This also protects against shock and vibration. The are CE certified. SPECIFICTION/OUTLINE 52152B 2 6
3 CIRCUIT CONNECTIONS: SEE SHEET 1 The has two connectors that are grouped as follows: CONNECTOR 1: High-current connector through which the power connections are made to the converter. This is a Deutsch type DTP, 4-pin, sealed connector rated at 125ºC. PIN #1 INPUT VOLTGE: Battery connection to the converter. Should be fused with a 30-amp automotive blade-type fuse. PIN #2 GROUND: Ground or Common connection for the converter. PIN #3 OUTPUT VOLTGE: Connects to the 12V loads. PIN #4 No Connection CONNECTOR 2: Connector is used only for the two low current connections to the converter. This is a Deutsch type DT, 6-pin, sealed connector. PIN #1 No Connection PIN #2 IGNITION: When connected to Input Voltage converter is activated. When disconnected or connected to Ground main output of converter is off (no output voltage present). PIN #3 No Connection PIN #4 MEMORY OUTPUT: Provides non-switched output voltage for radio memory. PIN #5 No connection PIN #6 No connection Typical wiring diagram SPECIFICTION/OUTLINE 52152B 3 6
4 ELECTRICL SPECIFICTIONS: Characteristic MIN TYP MX Unit Notes: Input Voltage (Vin) Guaranteed Operation V Non operating, Memory Output Current 10m Input Current Vin = 18V, load = 25.0, 14 Vin = 28V, load = 25.0, Output Voltage V Initial tolerance. Output Current (load) 25.0 mbient Temp = 65 C, Vin = 28V 15.0 mbient Temp = 85ºC, Vin = 28V mbient Temp = 23ºC, 18 Vin 20V Quiescent Current m Ignition off, Vin = 26V Memory Output Voltage V Memory Output Current Ignition Requirements Imem = 90m, Ignition = 0V, 20V Vin 36V m 20V Vin 36V, Ignition = 0V m 18 Vin 20V, Ignition = 0V Turn on V 12 Turn off Line Regulation ±% 18V Vin 36V, load = 15 Load Regulation 0.5 Vin = 28V, 100m load ±% Vin = 28V, 100m load 25 Output Ripple Voltage 0.13 V RMS, Vin=28V, Io=15, Efficiency Heat Sink Dissipation 88.9 Vin = 28V, load = 5, 23 C 88.5 Vin = 28V, load = 15, 23 C 85.8 % Vin = 28V, load = 25, 23 C 59 Vin = 20V, load = Watts Vin = 28V, load = Vin = 28V, load = 15 Input Reverse Polarity -200 V Continuous 1 Does not include harness wire loss. SPECIFICTION/OUTLINE 52152B 4 6
5 ELECTRICL NOISE CHRCTERISTICS: Electromagnetic Compatibility Level Notes: Radiated Immunity 100 V/m (typical) 10kHz to 1GHz, modulation: amplitude, 80% sinewave Emissions EN (CISPR 11), class B Transient Immunity Test Level Reference Inductive Load Switching -450V SE J1113/11 Test Pulse 1 Mutual Coupling +80V SE J1113/11 Test Pulse 2 Switching Spikes -160V SE J1113/11 Test Pulse 3a Switching Spikes +160V SE J1113/11 Test Pulse 3b Single Pulse: Starter Engagement -12V SE J1113/11 Test Pulse 4 Load Dump +150V SE J1113/11 Test Pulse 5 Electrostatic Discharge Immunity Level Reference Conducted: shipping & handling ± 8kV GM 9119P Conducted: in - vehicle ± 8kV SE J1113/13 FEB95 ir Discharge: shipping & handling ± 15kV GM 9119P ir Discharge: in vehicle ± 15kV SE J1113/13 FEB95 ENVIRONMENTL SPECIFICTIONS: Characteristic Parameter Notes Operational Temperature Range -40 to +65 C 40 amps continuous Storage Temperature Range -55 to 105 C Humidity 0 to 100 % RH Salt Spray (heat sink) 336 Hrs Per latest revision of STM B 117 SPECIFICTION/OUTLINE 52152B 5 6
6 [254.0] [63.50] [63.50] [63.50] [31.75] (0.123) ([3.11]) (4.15 [105.4]) (4.50 [114.3]) 2.83 [71.8] [5.33] 0.175[4.45] (4.155 [105.5]) [104.6] (2.74) ([69.5]) (2.70) ([68.6]) SPECIFICTION/OUTLINE 52152B 6 6
PRODUCT SPECIFICATION C00 Converter. 48/36V to 12V, 20 Amps w/switched Output
ISIONS DESCRIPTION DTE BY 001 3826 PRODUCTION RELESE 8/21/03 BF 002 4650 DD 6 PIN MTING CONNECTOR PN S 10/12/05 BF 003 4969 GENERL DOCUMENT MODIFICTIONS 6/29/0 GF 5065 ELECTRICL CHRCTERISTICS CHNGES 11/1/0
More informationProduct Specification 12010E00 EQUALIZER AND 12010C00 CONVERTER, 12V TO 24V FAMILY
001 4178 PRODUCTION RELESE 8/5/04 BF 4583 DD PIN DETIL TO PGE 8 7/15/05 BF Product Specification 12010E00 EQULIZER ND 12010C00 CONVERTER, 12V TO 24V FMILY PROPRIETRY THIS DRWING IS THE PROPERTY OF SURE
More information(UNIDIRECTIONAL) & (BIDIRECTIONAL) 24 VOLT, 200 AMP BATTERY SEPARATORS
412 PRODUCTION RELESE 1318-200 (UNIDIRECTIONL) & 1319-200 (BIDIRECTIONL) 24 VOLT, 200 MP BTTERY SEPRTORS PROPRIETRY THIS DRWING IS THE PROPERTY OF SURE POWER INC. and shall not be copied, reproduced, lent,
More informationProduct Specification 11020CL0 DC-DC CONVERTER TRAIL CHARGER WITH LOCKOUTS
ISIONS DESCRIPTION DTE BY 001 5423 PRODUCTION RELESE 5/05/09 JT - - - - CORR WIRE DIG(SH11) BU-U144 6/15/11 JT Product Specification 110CL0 DC-DC CONVERTER TRIL CHRGER WITH LOCKOUTS PROPRIETRY THIS DRWING
More informationProduct Specification 21XXXE00 EQUALIZER AND 21XXXC00 CONVERTER FAMILY
ISIONS ECO DESCRIPTION DTE BY 001 5332 PRODUCTION RELESE 11/26/08 JT 5489 DD 21100C00 MODEL NUMBER CLRIFY EQULIZER S OUTPUT VOLTGE DURING NO-LOD CHG SLES/MRKTG PPROVL BLOCK TO PROD MNGER PPROVL BLOCK 10/15/09
More informationProduct Specification 120XXE00 EQUALIZER AND 120XXC00 CONVERTER, 12V TO 24V FAMILY
ECO DESCRIPTION DTE BY 001 4265 PRODUCTION RELESE 10/18/04 BF 5070 REFORMT BLOCK REFINE LBEL DET ON LST TWO PGES 3/6/08 BF Product Specification 120XXE00 EQULIZER ND 120XXC00 CONVERTER, TO 24V FMILY 12040E00
More informationBATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]
ISIONS DESCRIPTION DTE BY 366 PRODUCTION RELESE 8/2/02 BF 002 3698 LOWER INPUT IMPEDNCE LEVEL 9/19/02 BF 003 4688 DD CONFORML COTING 1/23/06 BF 004 48 DD HETSHRINK TO TERMINL POST //06 BF 5303 UPDTE I
More information1318/ V BATTERY SEPARATOR
ISIONS ECO DESCRIPTION DTE BY 001 4153 PRODUCTION RELESE 7/30/04 BF 002 5188 CHNGE TRQ FRM 60±10 TO 50±5 IN/LBS & DD e-mrk TO LBEL 7/16/08 BF 003 5355 DD TRNSIENT PROTECTION 1/16/09 JT 5369 REDUCE ESD
More informationINTERCONNECT/CONTROLLER
ISIONS DESCRIPTION DTE BY 001 3875 PRODUCTION RELESE 6/19/03 BF 002 3949 DD TERMINL LBEL TO PRT 11/19/03 BF 003 4783 DD DIMENSION TOLERNCES 6/15/06 BF 004 4787 DD HETSHRINK TO TERMINL POST 7/7/06 BF 005
More information1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationLockout Hysteresis Voltage VDC Maximum Input Current Vin=18V, 100% Load A
EC-0100A/B/C/D 24V Output DC/DC Converter, Box Type Package FEATURES Ultra wide input voltage range, 18~106V 240W Output @ 18V~27V Vin range 360W Output @ 27~106V Vin range (Including 27V) Full Load Efficiency
More informationPackaging (1) Package
Features Switching Regulator RoHS / conform (% lead free) High reflow temperature SMD package Adjustable output voltage Short circuit protection, thermal shutdown Remote ON/OFF control very low shutdown
More informationBattery Separators - 100A
Stock No. Sure Power Part Number Description 80000 1314 Uni-Directional 80002 1315 Bi-Directional Features: Battery separator modules with integrated relay for 12V systems Monitors both the main and auxiliary
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationEMC and Durability Lab, HCL Technologies Ltd., #73-74, South Phase, Ambattur Industrial Estate, Chennai
Last Amended on - Page 1 of 10 I. EMI / EMC TESTS 1. IT Products / Household / Industrial / Medical / Network Telecommunications Equipment Radiated Emission Test (RE) CISPR11:2010 BSEN 55011:2010 CISPR22:2008
More informationPG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More informationB70SR12424A/B/C/D 12V Output DC/DC Converter, Box Type Package
B70SR12424A/B/C/D 12V Output DC/DC Converter, Box Type Package FEATURES Wide input voltage range, 36~106V 300W Output Full Load Efficiency up to 89.5% @48Vin; 90%@72Vin Intergrated fuse holder (option)
More informationRP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
More informationCHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
More informationB70SR24125A/B/C/D 24V Output DC/DC Converter, Box Type Package
B70SR24125A/B/C/D 24V Output DC/DC Converter, Box Type Package FEATURES Wide input voltage range, 36~106V 300W Output Full Load Efficiency up to 92.5% @48Vin; 92.5%@72Vin Parallel Connection of multiple
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
More informationMaximum Input Current Vin=18V, 100% Load A Vin=24V ma No-Load Input Current
FEATURES Wide input voltage range, 18~60V 200W Output @ 18V~27V Vin range 300W Output @ 27~60V Vin range (Including 27V) Full Load Efficiency up to 88.7% @48Vin Intergrated fuse holder Parallel Connection
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationS24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
More informationEfficiency(1) Max. Capacitive. Package(3) CTRL Logic(2) Single
4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to % No minimum load required EN5155 certified IEC/EN95-1 certified Features Regulated
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationDPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
More informationFeatures. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual
Features Unregulated Converters Low cost 2W converter Industry standard SIP7 package 3kVDC or 4kVDC isolation options Single or dual outputs Short circuit protected (/P versions) EN62368-1 DC/DC Converter
More informationDPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationSH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
More informationRCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
More informationPRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.
0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:
More informationDPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationSeries AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
More informationSafety Standards. Model Number:
Highlights & Features RoHS Compliant Relay alarm indirection Built-in 2 channel DC OK signal Caused by rugged handing Conformal coating on PCBA to protect against chemical and dust pollutants Class I,
More informationOUTPUT VOLTAGE 5V MAX.INPUT CURRENT 16.0A 12V 7.0A 12V 12V 24V 35.0A 28V 48V 12V 15V 24V 28V 23.0A 48V 12V 15V 24V 28V 48V 11.5A
210W to Single Output Full Brick DC/DC Converters STANDARD FULL BRICK PACKAGE POWER DENSITY UP TO 5.53W/CM 3 EFFICIENCIES FROM 86-91% ACTIVE LOAD SHARING WIDE INPUT VOLTAGE RANGE ACTIVE LOAD SHARING REMOTE
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationPackage (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 91% No minimum load required UL695-1, EN5155 & IEC/EN695-1
More information25 to 30 Watt XW Single Series DC/DC Converters
Features 4: Input Voltage Range Low Noise, Highly Regulated Efficiencies to 4 at Full Load No Derating to C Case Temperature Six-Sided Continuous Shielded, Low Thermal Gradient Copper Case Minimum Input
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationWATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
More informationMax. Input Power (W) Input Current v 2 2 0v 2 40v. Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC10-48 S 05 W - M2 P HC Series Name Input Output Output Input Operating Temp. Remote
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More informationTRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
More information产品技术规范. Product Name: Product Technical Specification SMARTSTONE. No.: CPFL0002 Version: A Issued date: Page 1 of 16
Product Name: TMAP Part Number: CPF00002 Drawing Number: CPFJ0002 Page 1 of 16 CONTENTS 1. General Data 1.1. Description 1.2. Installation Guide 1.3. Maximum ratings of pressure sensor 1.4. Operating characteristics
More informationNote1: Efficiency is tested by nominal Vin, full load and at 25 C. Package (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 1Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 93% No minimum load required EN5155, IEC/EN95-1 & UL95-1
More informationDC POWER SUPPLY ALIMENTATION C.C.
DC POWER SUPPLY ALIMENTATION C.C. ISO-TECH IPS 303A 201-3424 ISO-TECH IPS 601A 201-3446 SAFETY TERMS AND SYMBOLS These terms may appear in this manual or on the product: WARNING. Warning statements identify
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More information55 Watt K Triple Series DC/DC Converters
Features Very Low Noise, < mv P-P Maximum PCB Mounting with Optional Heat Sink or Chassis Mount Versions Efficiencies to 87 Common and Differential Mode Input Filtering Remote Sense On + Volt Output Single
More informationamp ramp Operators Manual Page 1 Saftronics 2S Ltd Turnbridge Mills Quay Street Huddersfield West Yorkshire HD1 6QT
amp ramp Operators Manual Saftronics S Ltd Turnbridge Mills Quay Street Huddersfield West Yorkshire HD 6QT Tel: 0484 530893 Fax: 0484 550500 Website:www.saftronics.co.uk E-Mail: sales@saftronics.co.uk
More informationPDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Stratford Road Solihull West Midlands B90 4GW Contact: Mr C Gregory Tel: +44 (0)121 627 3225 Fax: +44 (0)121 627 4353 E-Mail: colin.gregory@trw.com Website:
More informationSubrange SmartWire-DT electronic motor starters. Basic function Reversing starters (complete devices)
DATASHEET - EMS-RO-T-9-SWD-ADP Reversing starter 9A with SmartWire-DT Part no. EMS-RO-T-9-SWD-ADP Catalog No. 172763 Eaton Catalog No. EMS-RO-T-9-SWD-ADP EL-Nummer 4110026 (Norway) Delivery program Product
More informationC B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationS24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationNot for New Design 10 WATT WD DUAL LOW INPUT SERIES DC/DC CONVERTERS. Features
Features Universal 9 to 36 Volt Input Range Up to 10 Watts of PCB Mounted Power Efficiencies to > 80% Optional On/Off Control Pin Fully isolated, Filtered Design Low Noise Outputs Very Low I/O Capacitance,
More informationIMMOBILISER SYSTEM INTRODUCTION
IMMOBILISER SYSTEM INTRODUCTION 2017 Customer Base PRODUCT PICTURES KAT Part Nr. CUSTOMER DATE OF BEGINN SERIAL DELIVERY Immobiliser Type 1 (with TYCO Connectors) 33223 33241 Kramer Werke since 2006 Immobiliser
More informationFeatures. Figure 1. EFIL-28 Connection Diagram
Description The EFIL-28 Module is an EMI Filter designed for use with Calex DC/DC Converters. Built in a 1/2 brick package for systems with 24VDC and 28VDC nominal input, the EFIL-28 module can provide
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
More informationDC/DC Converter URB1D_LD-15W & URB1D_LD-20W Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated DC/DC converter Wide range of input voltage (4:1) Efficiency up to 89% Isolation voltage :1.5K VDC Operating temperature range: -40
More informationQualification of DHS50A,100A to Railway applications. (General Standard EN50155) (Shock and Vibration Standard EN61373)
Qualification of DHS50A,100A to Railway applications (General Standard EN50155) (Shock and Vibration Standard EN61373) Qualification to Railway applications Contents 1. Purpose 2. Scope 3. Qualification
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationPRO POWER 2 0 A L I T H I U M B AT T E RY C H A R G E R M O D E L : P P - L B C V E R S I O N : V 1. 0
PRO POWER 2 0 A L I T H I U M B AT T E RY C H AR G E R M O D E L : P P - L B C - 1 2 2 0 V E R S I O N : V 1. 0 Contents 1. Revised History... 1 2. Warning... 1 3. Notes... 1 4. Product Number System...
More informationUL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
More informationActuator LA35. Data sheet LINAK.COM/TECHLINE
Actuator LA35 Data sheet LINAK.COM/TECHLINE LA35 The LA35 is a very quiet and powerful actuator, and provides a practical and cost-effective solution with low power consumption. The actuator is designed
More informationPOWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
More informationSeries AM2D-Z 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to +85 o C Low ripple and noise With derating above +75C (see chart) High efficiency up to 82% Pin compatible with multiple manufacturers
More informationS-Series Brushless, Frameless Torque Motors
S-Series rushless, Frameless Torque Motors Slotless, brushless ring motors with high torque output and zero cogging Frameless design for easy integration into OEM machines Various winding options available
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More informationHAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly
More informationSeries AM2S-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single Model Voltage (V) FEATURES: RoHSCompliant Operating Temperature - to +85 4 Pin SIP Package / Isolation and 3VDC Ultra MiniaturePackage
More informationHAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
More informationIL1117-xx. 1.0A Low Dropout Positive Voltage Regulator TECHNICAL DATA. Features. Applications. Absolute Maximum Ratings. Rev. 02
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
More informationLDX-C120 Series is a 120 W integrated DIN Rail Battery Charger / DC UPS Power Supplies, suitable for wide variety of industrial applications.
LDX-C120 Series is a 120 W integrated DIN Rail Battery Charger / DC UPS Power Supplies, suitable for wide variety of industrial applications. In case of mains or unit failure the DC UPS function enables
More informationHAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
More informationHAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
More informationTime scale: from 0.05 s to 100 h Multi-function Plug-in for use with 96 series sockets. Relay + socket. Wiring diagram (without control signal)
86 Timer modules 86 Timer modules for use in conjunction with relay & socket. 86.00T - Multi-function & multi-voltage timer module 86.30T - Bi-function & multi-voltage timer module Complies with EN 45545-2:2013
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationGB60S 60W Single Output General Purpose Series
Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency
More informationECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
More informationBTE2000 / PTE2000 Series Precision stainless steel pressure transmitters
FEATURES...5 to...5 bar,...5 to...5 psi gage 1 For corrosive media in harsh environments 1...6 or... ma output Field interchangeable All welded stainless steel diaphragm construction MEDIA COMPATIBILITY
More informationOutput Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
More information